Database Develop

[Project Treble - LineageOS 15.1 (8.1.0) - OpenKirin] Infos, bugs and experiences

Latest release: Beta 5
Architecture: arm64
Android version: 8.1.0
Lineage version: 15.1
Android security patch level: August, 2018
FAQS
1) How to install
- Make sure you have unlocked bootloader!
- Look here
2) How to root
- Download Magisk Manager
- Direct install
3) Custom recovery
-Fastboot: Fully functional TWRP (recommended after complete install of Lineage)
Experiences
- NFC doesn't work, but is fixable with the following Magisk module
-Secondary camera is fixable with the following Magisk module
- Battery life is a bit worse than stock ROM. I haven't been able to really make improvements except running greenify.
-No face recognition for now

Hi body
I do not know how to do it.
How to remove the bootloader?
Thnx

So, by issuing "fastboot erase userdata" we are effectively skipping step 13 from the guide (factory reset in stock recovery)?
If not, how to power off the phone after "fastboot reboot"?

evildev said:
So, by issuing "fastboot erase userdata" we are effectively skipping step 13 from the guide (factory reset in stock recovery)?
If not, how to power off the phone after "fastboot reboot"?
Click to expand...
Click to collapse
I still needed to boot to recovery and do a factory reset on my honor 8. I skipped fastboot reboot and just held the Power + Volume Up until I saw the Boot Logo.

srgrusso said:
I still needed to boot to recovery and do a factory reset on my honor 8. I skipped fastboot reboot and just held the Power + Volume Up until I saw the Boot Logo.
Click to expand...
Click to collapse
Sweet, thanks!

evildev said:
So, by issuing "fastboot erase userdata" we are effectively skipping step 13 from the guide (factory reset in stock recovery)?
If not, how to power off the phone after "fastboot reboot"?
Click to expand...
Click to collapse
I removed the line. Better to follow OpenKirin instructions. I used it because of TWRP.

harry_turtle said:
I removed the line. Better to follow OpenKirin instructions. I used it because of TWRP.
Click to expand...
Click to collapse
Alrighty
Anyway, you said camera is OK, OK as in same as stock, just... Okay-ish? I guess 2mpix camera for depth doesn't serve any purpose here?

evildev said:
Alrighty
Anyway, you said camera is OK, OK as in same as stock, just... Okay-ish? I guess 2mpix camera for depth doesn't serve any purpose here?
Click to expand...
Click to collapse
-swapping between front and rear camera in whatsapp is extremely laggy (takes approx ten seconds)
-swapping with normal camera app takes one second
-taking pics is a bit slower than on stock
I'm not really a camera expert.. how can i test if the 2mpix camera is working?

harry_turtle said:
-swapping between front and rear camera in whatsapp is extremely laggy (takes approx ten seconds)
-swapping with normal camera app takes one second
-taking pics is a bit slower than on stock
I'm not really a camera expert.. how can i test if the 2mpix camera is working?
Click to expand...
Click to collapse
There should be a Portrait or Wide Aperture mode in the camera app. If you find one, test it and see if the depth effect works. I doubt it will though.

seb5049 said:
There should be a Portrait or Wide Aperture mode in the camera app. If you find one, test it and see if the depth effect works. I doubt it will though.
Click to expand...
Click to collapse
Both don't work indeed.

harry_turtle said:
Both don't work indeed.
Click to expand...
Click to collapse
I see. You can actually install the Huawei stock camera app which should restore dual camera functionality. The only problem is some people are having issues setting it up.
Here's the link to the thread about it: https://forum.xda-developers.com/pr.../huawei-stock-camera-app-treble-roms-t3735169
If someone could test this that would be great.

seb5049 said:
I see. You can actually install the Huawei stock camera app which should restore dual camera functionality. The only problem is some people are having issues setting it up.
Here's the link to the thread about it: https://forum.xda-developers.com/pr.../huawei-stock-camera-app-treble-roms-t3735169
If someone could test this that would be great.
Click to expand...
Click to collapse
This one should work better since it's specifically for kirin 659 devices:
https://forum.xda-developers.com/apps/magisk/module-huawei-p20-camera-kirin659-t3798436

seb5049 said:
I see. You can actually install the Huawei stock camera app which should restore dual camera functionality. The only problem is some people are having issues setting it up.
Here's the link to the thread about it: https://forum.xda-developers.com/pr.../huawei-stock-camera-app-treble-roms-t3735169
If someone could test this that would be great.
Click to expand...
Click to collapse
Well that didn't work...
But this did: aperture and portrait mode are working, camera is more responsive and looks better now.

playstore problem
the applications are not downloaded immediately, some solution or someone else with the same problem?

DarkDante1209 said:
the applications are not downloaded immediately, some solution or someone else with the same problem?
Click to expand...
Click to collapse
Clear data of google play services should do the trick. If it doesn't work also do playstore.

This rom have gapps or not?

Code:
leap_ahead said:
This rom have gapps or not?
Click to expand...
Click to collapse
Anyone?

leap_ahead said:
Code:
Anyone?
Click to expand...
Click to collapse
Yes Gaps included.

harry_turtle said:
Yes Gaps included.
Click to expand...
Click to collapse
yes thanks I already use this rom no radio app, no faceunlock . how I can install it ? Also no root ?

leap_ahead said:
yes thanks I already use this rom no radio app, no faceunlock . how I can install it ? Also no root ?
Click to expand...
Click to collapse
I will add no face unlock to the initial post.
Root is already explained there.
Radio idk.

[V30/V30+/V35][TWRP] Silent Camera Sound Files

This is a simple mod that overwrites the camera sound files with a silent file, and you can revert the original files easily. This was inspired by the v20 mod, but I'm using a smaller and shorter file with a cleaner install script, and also included additional v30 sound files (lens select sound, etc).
Flash it via TWRP to overwrite the files in /system/media/audio/ui. If you want the original sound files back, just flash the revert zip. See attached.
Credit: 1 millisecond silent ogg file by Fabian42.

Thanks so much, I can confirm it works
Any chance we can silence the wireless charging sound?

lost_ said:
[V30/V30+/V35][TWRP] Silent Camera Sound Files
Click to expand...
Click to collapse
You say this works on the V35... How? Is there a way to unlock / root / install recovery on that phone? Thanks!

clipcarl said:
You say this works on the V35... How? Is there a way to unlock / root / install recovery on that phone? Thanks!
Click to expand...
Click to collapse
No. He probably meant V30/V30+/V30S.

Is there any way to change the files manual? Thanks

Peter_S said:
Is there any way to change the files manual? Thanks
Click to expand...
Click to collapse
You would need root permission to change manually. If you have root, then you probably have TWRP -- so just flash them in TWRP.
If you are asking is there some way to change them without root permission, the answer is no.
If you do not have root, there's a guide to unlock your bootloader, install TWRP and root. ALL V30/V30+/V30S can be bootloader unlocked and rooted.

Many Thanks. That's the answer I missed

im using Silent Mode Pro to mute camera sound, very very good!
https://play.google.com/store/apps/details?id=com.kmshack.mute&hl=en_US

Can't download revert.zip "410 error".
is there another method, instead of flashing revert zip?

ngaromutis said:
Can't download revert.zip "410 error".
is there another method, instead of flashing revert zip?
Click to expand...
Click to collapse
RESTORE the TWRP backup you made before doing this. You do have a TWRP backup, right? If you don't, it's your fault.
If you didn't even bother to make a TWRP backup, then reflash stock firmware KDZ or flash a stock firmware ROM in TWRP.

I can't download both of these. It says error 410. Is there any other host?
Thank you

Here downloaded without problem, thanks for your work!

ChazzMatt said:
No. He probably meant V30/V30+/V30S.
Click to expand...
Click to collapse
The V30s is rootable and can get bootloader unlocked?

CCJ22 said:
The V30s is rootable and can get bootloader unlocked?
Click to expand...
Click to collapse
Yes, it's a V30 JOAN variant. All LG V30 "Joan" phones can be bootloader unlocked and rooted. See WTF thread.
Two examples:
cmrntnnr said:
Finally home and so happy I have to post. The shiny and slippery v30s is free and twrp'd!
Click to expand...
Click to collapse
Tinkerer_ said:
Titanium Backup and root apps work with no problems here. Everything was done per this thread on a B&H V30S, including the files downloaded from links in the thread (unlock.bin, TWRP, Magisk, root check disabler and encryption disabler).
Stock Oreo 8.0 that came on the phone runs great with zero problems due to the OS, as far as I can tell, on T-Mobile.
This is a fantastic phone. Very fast, smooth, and clean, especially with all the junk cleared (ads cut out, bloatware frozen, Google search field removed, Nova Launcher goodness). Audio on the SoundMAGIC E80 headphones is superlative, their 64 Ohm impedance yields HIM with no need for impedance trickery or SW hack. Too bad a user has to go through so much with so many pitfalls to arrive at a good result like this, too bad LG will shut the door on BL with June OTA for folks not paying attention.
THANKS again to XDA community.
...
Click to expand...
Click to collapse

Missing product code

I have installed a couple of roms to test, but last night I got screwed up, I don't know what I did wrong why the product code went missing. I installed @_alexndr's [ROM][N950F/DS/N][ALEXNDR] * U5CRHA * DevBase v5.9 * Encryption support [Sep-16] rom. After it booted up, i noticed that it as so sluggish, I did wipe everything before installing the rom. so I decided to go back to stock. I noticed when I went to download mode the
"carrier id" is now blank whereas it was PAK before it was gone, also I went to settings it displayed XTC/XTC/ .
I did backup my efs
How do I restore my original product code?
Please help

Excuse me, off topic, but what font are you using?

winol said:
Excuse me, off topic, but what font are you using?
Click to expand...
Click to collapse
I'm using Googlesans

upbeatwrench said:
I have installed a couple of roms to test, but last night I got screwed up, I don't know what I did wrong why the product code went missing. I installed @_alexndr's [ROM][N950F/DS/N][ALEXNDR] * U5CRHA * DevBase v5.9 * Encryption support [Sep-16] rom. After it booted up, i noticed that it as so sluggish, I did wipe everything before installing the rom. so I decided to go back to stock. I noticed when I went to download mode the
"carrier id" is now blank whereas it was PAK before it was gone, also I went to settings it displayed XTC/XTC/ .
I did backup my efs
How do I restore my original product code?
Please help
Click to expand...
Click to collapse
This minor issue is NOT related to my ROM and has been disscussed in my thread long time ago
See below disscussion (#252 - #256), especially @dr.ketan's statement (#256):
https://forum.xda-developers.com/showthread.php?p=76121821&postcount=256

_alexndr said:
This minor issue is NOT related to my ROM and has been disscussed in my thread long time ago
See below disscussion (#252 - #256), especially @dr.ketan's statement (#256):
https://forum.xda-developers.com/showthread.php?p=76121821&postcount=256
Click to expand...
Click to collapse
also, after flashing stock firmware, I had the data erased (didn't used the HOME_CSC), after I enable developer options, OEM Unlock is already there and the option is ticked

_alexndr said:
This minor issue is NOT related to my ROM and has been disscussed in my thread long time ago
See below disscussion (#252 - #256), especially @dr.ketan's statement (#256):
https://forum.xda-developers.com/showthread.php?p=76121821&postcount=256
Click to expand...
Click to collapse
I have later more studied and found this code is in bootloader and strongly believe this specifically happens when you flash BL and modem with TWRP instead of odin. I request users to check this. Though this seems purely a cosmetic glitch and yet haven't found any ill effect practically.

dr.ketan said:
I have later more studied and found this code is in bootloader and strongly believe this specifically happens when you flash BL and modem with TWRP instead of odin. I request users to check this. Though this seems purely a cosmetic glitch and yet haven't found any ill effect practically.
Click to expand...
Click to collapse
Is this because of some ROMs with such options to update BL/CP before installing the rom may have cause the issue?

upbeatwrench said:
Is this because of some ROMs with such options to update BL/CP before installing the rom may have cause the issue?
Click to expand...
Click to collapse
This is what is my speculation, if someone don't have this issue and flash BL and Modem with TWRP and if he/she get this error, we can confirm it.
But this code is simply a cosmetic and I haven't seen any issue related to this.

upbeatwrench said:
I have installed a couple of roms to test, but last night I got screwed up, I don't know what I did wrong why the product code went missing. I installed @_alexndr's [ROM][N950F/DS/N][ALEXNDR] * U5CRHA * DevBase v5.9 * Encryption support [Sep-16] rom. After it booted up, i noticed that it as so sluggish, I did wipe everything before installing the rom [...]
Click to expand...
Click to collapse
BTW: Side note - my ROM is NOT sluggish but you just experienced latest Magisk's issue after clean install. More info you will find in similar S8's thread (post #280):
https://forum.xda-developers.com/showthread.php?p=77657344&postcount=280
... I just forgot to put same info in N8 thread

dr.ketan said:
This is what is my speculation, if someone don't have this issue and flash BL and Modem with TWRP and if he/she get this error, we can confirm it.
But this code is simply a cosmetic and I haven't seen any issue related to this.
Click to expand...
Click to collapse
I see, if that's the case, I did tick those options cause I thought it would be better to update BL/CP
anyways, I thought missing the product code or the 3rd csc was a huge problem because as I was installing different roms after I lost it and reinstall the stock FW, there was a lot of lag and every rom that I install, I did wipe/format data,cache before installing a new one.
Another one problem I encountered was everytime I download root explorer app and try to modify some cscfeatures, the SystemUI stops, sometimes even after a few minutes after it restarted, the SystemUI stops.
anyway, I thought these problems was related to the product code being missing, but it's all good now, everything is working just fine :good:

I have had this problem for ages, over 6 months, had flashed a number of roms and different country stock files before I noticed it had changed.
I had not used Dev-Base at the point of realising the change though.
I have never had any issues in functionality despite this. Not seeing anyone else with it, I assumed Samsung maybe updated something for unlocked phones.

_alexndr said:
BTW: Side note - my ROM is NOT sluggish but you just experienced latest Magisk's issue after clean install. More info you will find in similar S8's thread (post #280):
https://forum.xda-developers.com/showthread.php?p=77657344&postcount=280
... I just forgot to put same info in N8 thread
Click to expand...
Click to collapse
Yup, sorry about that, I thought it was only yours,
thanks for letting me know that Magisk was responsible for that extreme lag

upbeatwrench said:
I see, if that's the case, I did tick those options cause I thought it would be better to update BL/CP
anyways, I thought missing the product code or the 3rd csc was a huge problem because as I was installing different roms after I lost it and reinstall the stock FW, there was a lot of lag and every rom that I install, I did wipe/format data,cache before installing a new one.
Another one problem I encountered was everytime I download root explorer app and try to modify some cscfeatures, the SystemUI stops, sometimes even after a few minutes after it restarted, the SystemUI stops.
anyway, I thought these problems was related to the product code being missing, but it's all good now, everything is working just fine :good:
Click to expand...
Click to collapse
Nope, None of such issue is related to missing code.
this error I have on my N8 and I remember once I had flashed BL and modem via TWRP , though at that time I have no idea otherwise I can confirm it. I have made small tool to restore missing code too but never shared (Nor I am using) because t requires to patch on every boot. So my suggestion is just forget it.

MI A2 camera2 api on pie?

I'm on Mi A2 pie stable ..as expected xiomi not enabled camera2api still...if anyone has found any method for enabling camera 2 api on pie stable rom please help me...

It would be nice if someone can upload boot.img from latest pie, so we can patch it with magisk to gain root. After that we can edit build.prop to enable camera2 api.
Sent from my Mi A2 using Tapatalk

Mr.Nice.ba said:
It would be nice if someone can upload boot.img from latest pie, so we can patch it with magisk to gain root. After that we can edit build.prop to enable camera2 api.
Click to expand...
Click to collapse
The beta image is the same as the stock image. The beta patched boot.img has already been uploaded. Check the forums.

I read today this on searching in google to enable camera2api without root in mia2..
I'm in feb update (india).
I downloaded these patch boot file & trying to go in fastboot mode..
But when i connect my phone to laptop (windows 7), there is connecting sound i heard ..
I enabled already oem unlocking option & usb debugging in phone through tapping 7 times & all ..
But when after inserting commands in adb & entered , it's saying waiting for device..
& Nothing is shown in screen in mi a2 , other than fastboot bunny..
Can anyone help me what's going on wrong here ?
Link of that site :
https://www.the***********.com/enable-camera2-api-xiaomi-mi-a2-lite-guide/
The *** is putted by xda automatically in link..
In actual in place of *** it is 'the custom Android' (without space)

Appar khandelwal said:
I read today this on searching in google to enable camera2api without root in mia2..
I'm in feb update (india).
I downloaded these patch boot file & trying to go in fastboot mode..
But when i connect my phone to laptop (windows 7), there is connecting sound i heard ..
I enabled already oem unlocking option & usb debugging in phone through tapping 7 times & all ..
But when after inserting commands in adb & entered , it's saying waiting for device..
& Nothing is shown in screen in mi a2 , other than fastboot bunny..
Can anyone help me what's going on wrong here ?
Link of that site :
https://www.the***********.com/enable-camera2-api-xiaomi-mi-a2-lite-guide/
The *** is putted by xda automatically in link..
In actual in place of *** it is 'the custom Android' (without space)
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a2/how-to/how-to-enabling-cam2-gcam-android-t3868766
Have you installed adb drivers?

mariosenta said:
https://forum.xda-developers.com/mi-a2/how-to/how-to-enabling-cam2-gcam-android-t3868766
Have you installed adb drivers?
Click to expand...
Click to collapse
It's already in pc earlier.. let me reinstall it

Appar khandelwal said:
It's already in pc earlier.. let me reinstall it
Click to expand...
Click to collapse
Usually drivers create this problem

mariosenta said:
Usually drivers create this problem
Click to expand...
Click to collapse
Did you try any custom rom in MI A2 yet ?

Appar khandelwal said:
Did you try any custom rom in MI A2 yet ?
Click to expand...
Click to collapse
No, not yet, just enabled camera2api folowing tutorial from the link above.

mariosenta said:
No, not yet, just enabled camera2api folowing tutorial from the link above.
Click to expand...
Click to collapse
How's the camera quality after camera2api...
& Does using temporary root method also format phone data ?

Appar khandelwal said:
How's the camera quality after camera2api...
& Does using temporary root method also format phone data ?
Click to expand...
Click to collapse
With pixel camera, quality is superb. As for stock its a little better after the march update. Yes, it formated data but you have a tutorial for botloader unlock and rot without losing data.

mariosenta said:
With pixel camera, quality is superb. As for stock its a little better after the march update. Yes, it formated data but you have a tutorial for botloader unlock and rot without losing data.
Click to expand...
Click to collapse
Where is the tutorial ?
I'm not unlocking bootloader..
Just temporary rooting phone & unrooting on restart.
& Where to find these pixel camera ?
& March update already rolled back because of many bugs like always ..

Appar khandelwal said:
Where is the tutorial ?
I'm not unlocking bootloader..
Just temporary rooting phone & unrooting on restart.
& Where to find these pixel camera ?
& March update already rolled back because of many bugs like always ..
Click to expand...
Click to collapse
Well if you are just rooting, you wont lose data, you just need patched boot image to flash with cmd. You have tutorial in link I sent you, just skip the part with unlocking bootloader, and folow tutorial. You have all of needed tutorial here on xda, just dig a little.

Yeah i'm doing the same...
Just booting the patched image..
What about pixel camera ?
Do you have link for downloading that apk ?

Appar khandelwal said:
Yeah i'm doing the same...
Just booting the patched image..
What about pixel camera ?
Do you have link for downloading that apk ?
Click to expand...
Click to collapse
https://f.celsoazevedo.com/file/gcamera/MGC_6.1.021_BSG_Arnova_TlnNeun_V1.3.030119.0645.apk
But i think you will need to unlock bootloader for this to work

mariosenta said:
https://f.celsoazevedo.com/file/gcamera/MGC_6.1.021_BSG_Arnova_TlnNeun_V1.3.030119.0645.apk
But i think you will need to unlock bootloader for this to work
Click to expand...
Click to collapse
Yeah i did & it worked...
Adb drivers were missing for mi a2..
But for booting image it asked for unlocking bootloader..
But if i did this then i'm afraiding to lose data & warranty

Appar khandelwal said:
Yeah i did & it worked...
Adb drivers were missing for mi a2..
But for booting image it asked for unlocking bootloader..
But if i did this then i'm afraiding to lose data & warranty
Click to expand...
Click to collapse
This is for mi a2 lite, dont know if it work for a2 version https://www.google.com/amp/s/forum....ow-to-unlock-bootloader-erasing-t3878453/amp/

mariosenta said:
There is another way to unlock bootloader without wiping data, i saw it here on xda, just dig a little, bro. Explore
Click to expand...
Click to collapse
Did you left bootloader unlocked ?
Are you getting updates without locking it ?

Appar khandelwal said:
Did you left bootloader unlocked ?
Are you getting updates without looking it ?
Click to expand...
Click to collapse
Yeah, bro, all is working well. Updated to March OTA.
No problem so far. Just backup for safe reasons

mariosenta said:
Yeah, bro, all is working well. Updated to March OTA.
No problem so far. Just backup for safe reasons
Click to expand...
Click to collapse
March update already rolled back..
Okay i'll try that method to unlock bootloader..

Manual update failed. WW firmware and Fingerprint

Hi all,
I have downloaded UL-ASUS_I001_1-ASUS-17.0210.2001.60-1.1.97-user.zip from the Asus website and placed the file at the root of the disk. Reboot and I'm getting notified there is an update, click update and it informs me the update failed straight away. Both the firmware and fingerprint have been flashed to WW. Any help would be greatly appreciated.

Do it manually with the RAW version...
I'm in A10 stable but with high consumption of Google Services. I will reflash for clean install...
Edit: did it and it was more or less the same. But it seemed to be something related to MagiskHide. I hided in Magiskhide com.android.blablablablalbal.unstable (just that) and it was fine

I am already on WW Rom and fingerprint WW too but safety net fails
Hi Team,
I just bought ROG 2 tencent and it came loaded with WW rom and WW fingerprint as details below.
Issue- it Passed safety net and everything works fine including netflix, youtube.
Question: is there anything need to do before manually updating to A10 ?
Tried to root the udate but its not detecting. How to update manually ?
Current details
ROM: WW_Phone-user 9 PKQ1. 190414.00116.0631.1910.44-0
Fingerprint: asus/ww_I001D/ ASUS_I001_1:9/PKQ1. 190414.00116.0631.1910.44-0
Please Please Help m crying now

urii13 said:
Do it manually with the RAW version...
I'm in A10 stable but with high consumption of Google Services and I will reflash for clean install...[/QU
If possible, please explain the clean installation method in detail. The only way to update flash is to flash?
Thanks
Click to expand...
Click to collapse

MP888 said:
Hi Team,
I just bought ROG 2 tencent and it came loaded with WW rom and WW fingerprint as details below.
Issue- it fails safety net and everything works fine including netflix, youtube.
Question: is there anything need to do before manually updating to A10 and pass the safety net ?
Current details
ROM: WW_Phone-user 9 PKQ1. 190414.00116.0631.1910.44-0
Fingerprint: asus/ww_I001D/ ASUS_I001_1:9/PKQ1. 190414.00116.0631.1910.44-0
Please Help m crying now
Click to expand...
Click to collapse
Tried to update by copying *UL-ASUS_I001_1-ASUS-17.0210.2001.60-1.1.97 Zip to root, but no luck its not detecting
please help

nigc said:
urii13 said:
Do it manually with the RAW version...
I'm in A10 stable but with high consumption of Google Services and I will reflash for clean install...[/QU
If possible, please explain the clean installation method in detail. The only way to update flash is to flash?
Thanks
Click to expand...
Click to collapse
1. I did a factory reset. From TWRP in my case, but in original recovery you can do it too.
2. Download the RAW file in the PC
3. Enter in Fastboot mode, conect the cable to the pc and launch the command 'xxxxx_AFT' or something like that (I don't remember the name)
4. Just wait and wait and wait. Some minutes later you will have everything ready.
Click to expand...
Click to collapse

urii13 said:
nigc said:
1. I did a factory reset. From TWRP in my case, but in original recovery you can do it too.
2. Download the RAW file in the PC
3. Enter in Fastboot mode, conect the cable to the pc and launch the command 'xxxxx_AFT' or something like that (I don't remember the name)
4. Just wait and wait and wait. Some minutes later you will have everything ready.
Click to expand...
Click to collapse
:good:
Thanks for your video for inastall a10 ?????
Click to expand...
Click to collapse

urii13 said:
nigc said:
1. I did a factory reset. From TWRP in my case, but in original recovery you can do it too.
2. Download the RAW file in the PC
3. Enter in Fastboot mode, conect the cable to the pc and launch the command 'xxxxx_AFT' or something like that (I don't remember the name)
4. Just wait and wait and wait. Some minutes later you will have everything ready.
Click to expand...
Click to collapse
:good::good:
This is how you did it
You may explain in more detail
Links to download
Is there a video of this?
Click to expand...
Click to collapse

nigc said:
urii13 said:
:good::good:
This is how you did it
You may explain in more detail
Links to download
Is there a video of this?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=3fFICBHt5VU
See this video, and other from this guy. He explains everything.
Click to expand...
Click to collapse

urii13 said:
nigc said:
https://www.youtube.com/watch?v=3fFICBHt5VU
See this video, and other from this guy. He explains everything.
Click to expand...
Click to collapse
This method does not FIX the problem
Click to expand...
Click to collapse

nigc said:
urii13 said:
This method does not FIX the problem
Click to expand...
Click to collapse
If you see every video of installation you can see the steps I've put duplicated at all.
Click to expand...
Click to collapse