Xposed is loading modules from mnt/asec, not sure if that's the correct location but that's the only info I have. I have the following error saying file does not exist when the modules load. Any way to fix this? Sorry don't have much info. Thanks in advance ?
Any other information? ROM, device, etc.
Also, maybe share the logs?
I'm not too techy when it comes to how Xposed works, but maybe I can provide some assistance.
Sent from my Nexus 6P using Tapatalk
Stock Rom, J200Y. 5.1.1. How do I share the log? Sorry bit of a noob ?
Related
Delete please,i found the problem
Can you tell what the problem was and how to fix it? Several people I know and myself are having system ui crashes and I haven't been able to narrow it down to a particular module yet. Thanks
Never mind the update to xblast fixed it
Sent from my XT1056
The log data getting bigger
I update Xposed Installer to v2.6.1 on lenovo with JB 4.2.1 OS, the problem is all the time "log data" getting bigger if not deleted manually. How do I disable or delete logs automatically, because in the previous version (using v2.4.1) does not happen like that. Here i attach some screen shoot from my phone. for developer @rovo89 - OP or admin thanks for advance. please help.
TithaZong said:
I update Xposed Installer to v2.6.1 on lenovo with JB 4.2.1 OS, the problem is all the time "log data" getting bigger if not deleted manually. How do I disable or delete logs automatically, because in the previous version (using v2.4.1) does not happen like that. Here i attach some screen shoot from my phone. for developer @rovo89 - OP or admin thanks for advance. please help.
Click to expand...
Click to collapse
Please read the FAQ.
I'm closing this thread since it's served its purpose – it's not a general help thread.
I'm changing the settings of status bar but require exposed framework so I install framework and then i open status bar app but not work.
During xposed log say: Errors during Xposed initialization
So what I do?
Plz look attached picture for explain batter
I really hope this isn't it... But I have to ask... you DID reboot after installing xposed and then reboot after enabling the module correct?
If not, then do that.
Bakerboy448 said:
I really hope this isn't it... But I have to ask... you DID reboot after installing xposed and then reboot after enabling the module correct?
If not, then do that.
Click to expand...
Click to collapse
Dear baker!
I'm 4 or 5 time rebot phone but same result and then finely reset phone from recovery mode and again install xposed.........but failed...........
Dear please fix this.....
plz ans me im waiting for your fix… ..
Bakerboy448 said:
I really hope this isn't it... But I have to ask... you DID reboot after installing xposed and then reboot after enabling the module correct?
If not, then do that.
Click to expand...
Click to collapse
Dear Baker!
im waiting for your ans plz reply me fast… .
Custom ROM with themes?
HI!
Does your ROM includes a theme system? If so, that's the cause...
I've been looking for an answer too and I found this thred at GitHub. I haven't post much so I have no rights to post URLs as links for now... Please copy paste the following link:
PHP:
https://github.com/rovo89/XposedInstaller/issues/178
There we can read the following:
rovo89 commented on 19 may 2014 said:
ok, that's it then. Some roms have theming engines that conflict with xposed. I'm looking for solutions, but meanwhile, please use the "disable resources api" setting in the installer. You might not be able to use some modules, but most should still work.
Click to expand...
Click to collapse
Doing so enables Xposed and that rebooting red message dissapears. However many modules are not functional if this adjustment is set in the configuration, so it's useless...
As far as I understand, there is no fix forthat issue then. So you can try another ROM with no themes system.
I hope this has been helpful for you =)
Uninstall xposed installer apk, install xposed installer apk, reboot.
you DID reboot after installing xposed
Hello
framework should be installed manually i think
xj
Does anyone have any experience with it?
I tried with Xposed arm 64 and the result is bootloop
It should be wsm tools instead of xposed I think. But I don't believe there is a version that is compatible with our device currently
brumie said:
Does anyone have any experience with it?
I tried with Xposed arm 64 and the result is bootloop
Click to expand...
Click to collapse
xposed is incorporated into their firmware, though it has been highly modified.
So did anybody managed to get a full Xposed support ?
Has anybody tried WSM tools ?
No, WSM cant install the framework either...
I tried this http://forum.xda-developers.com/showthread.php?t=3165211 and it didn't work either
Any update guys?
No Update, Unfortunately
I did manage to get a bit further, I already said this on MIUI forum. I have successfully flashed SDK21 without any bootloops but the problem is that WSM Tools does not support SDK21
Someone said it works now?
http://xiaomi.eu/community/threads/looking-for-xposed-or-wsm-mod.28030/#post-251612
I'll try the minks given by the user who said it works and I'll report.
However it's highly doubtful it'll work ?
Was going to try it out at home but since you are giving a go let us know how it goes.
Well I tried but Xposed is still incompatible with our processor's architecture :/
Still not working for me
Woo hoo - http://en.miui.com/thread-145999-1-1.html
Hope someone can reupload this to another file service.
thendless said:
Woo hoo - http://en.miui.com/thread-145999-1-1.html
Hope someone can reupload this to another file service.
Click to expand...
Click to collapse
I uploaded it to MEGA and posted the link (I'm Artemisiash) and I created a new thread in the Development section so that XDA users can try it but when I tried it I couldn't get Xposed to fully works
o really? Well ill give it a go tonight hopefully I have better luck
Still, xposed not compatible... https://github.com/rovo89/XposedBridge/issues/61
Please comment at this thread at github and get help from the developer.
Sent from my MI NOTE Pro using Tapatalk
[email protected],
I'm writing an Xposed module including a user interface and implemented this to hide the launcher icon. I thought, it would still be possible to launch the interface from the Xposed Installer, but this doesn't work.
Can someone tell me how to solve this problem? I'm sure it's possible, because I've seen modules doing so, but I can't find one anymore.
Plz help, thx
Cypher_01 said:
[email protected],
I'm writing an Xposed module including a user interface and implemented this to hide the launcher icon. I thought, it would still be possible to launch the interface from the Xposed Installer, but this doesn't work.
Can someone tell me how to solve this problem? I'm sure it's possible, because I've seen modules doing so, but I can't find one anymore.
Plz help, thx
Click to expand...
Click to collapse
Get a logcat from the event you click on the module in the Xposed Installer. It has to show the error.
Sent from my iPhone 6 Plus using Tapatalk
Check this post
http://forum.xda-developers.com/android/help/how-to-hide-app-drawer-t3075000
Modules work one time after reboot stop working
Rom RR 7.1.0
Nexus 6p
Everything looks fine in your log. Unless you really need it though, I'd recommend removing the Universal SafetyNet Fix module. It replaces Magisk internal busybox with one that might cause issues... Better to use the resetprop tool to change the device fingerprint to the stock 6P one of you can't pass SafetyNet on that ROM.
What is it that doesn't work? Details, please...
Didgeridoohan said:
Everything looks fine in your log. Unless you really need it though, I'd recommend removing the Universal SafetyNet Fix module. It replaces Magisk internal busybox with one that might cause issues... Better to use the resetprop tool to change the device fingerprint to the stock 6P one of you can't pass SafetyNet on that ROM.
What is it that doesn't work? Details, please...
Click to expand...
Click to collapse
injected youtube models
Fix mic
Didgeridoohan said:
Everything looks fine in your log. Unless you really need it though, I'd recommend removing the Universal SafetyNet Fix module. It replaces Magisk internal busybox with one that might cause issues... Better to use the resetprop tool to change the device fingerprint to the stock 6P one of you can't pass SafetyNet on that ROM.
What is it that doesn't work? Details, please...
Click to expand...
Click to collapse
Ans this msg show up after every reboot
hk48 said:
injected youtube models
Fix mic
Click to expand...
Click to collapse
That's not very detailed...
hk48 said:
Ans this msg show up after every reboot
Click to expand...
Click to collapse
That's not a Magisk issue. You have to match the vendor image with the system image. It even tells you what factory image to get the file from.
Modules not working 14.3/14.0
Modules work one time after reboot stop working
Rom RR 7.1.0
Nexus 6p
Click to expand...
Click to collapse
HI.. I have the same issues last days - then i tried to use an other Kernel that have Magisk integratet! Since that all fine (mostly) !!
Here the link to my thread about - in it you can found the link to the Kernel with Magisk...
https://forum.xda-developers.com/apps/magisk/problem-module-install-lost-root-galaxy-t3703398
I hope that fix your issues...
Greetz...
Didgeridoohan said:
That's not very detailed...
That's not a Magisk issue. You have to match the vendor image with the system image. It even tells you what factory image to get the file from.
Click to expand...
Click to collapse
That one I check it
Sent from my Nexus 6P using Tapatalk
n82freak said:
HI.. I have the same issues last days - then i tried to use an other Kernel that have Magisk integratet! Since that all fine (mostly) !!
Here the link to my thread about - in it you can found the link to the Kernel with Magisk...
https://forum.xda-developers.com/apps/magisk/problem-module-install-lost-root-galaxy-t3703398
I hope that fix your issues...
Greetz...
Click to expand...
Click to collapse
I will try it and hope work، thanks [emoji846]
Sent from my Nexus 6P using Tapatalk
hk48 said:
That one I check it
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
You made it sound like no modules work...
If it's only specific modules are troublesome, ask for help in the specific module threads. With lots of details about what doesn't work and don't forget to include logs.
Didgeridoohan said:
You made it sound like no modules work...
If it's only specific modules are troublesome, ask for help in the specific module threads. With lots of details about what doesn't work and don't forget to include logs.
Click to expand...
Click to collapse
Yes، all modules not working but in magisk shows modules work but when i use every module nothing work like im use the original app، hope i got that clear [emoji20]
Sent from my Nexus 6P using Tapatalk
hk48 said:
Yes، all modules not working but in magisk shows modules work but when i use every module nothing work like im use the original app، hope i got that clear [emoji20]
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Ok. We need to clear things up....
I see you have a whole bunch of modules installed and like I said, your log looks good. But when asked for details you only mentioned iYTBP and Android mic fix as not working. This is where I would like some details. How do you know that the modules don't work? What have you tested? What is the expected behaviour and what are you seeing?
Let's start with something that's easy to test: busybox. Open a terminal emulator and type busybox. If nothing happens, run the command as su. Does it show a list of all the applets available?
Didgeridoohan said:
Everything looks fine in your log. Unless you really need it though, I'd recommend removing the Universal SafetyNet Fix module. It replaces Magisk internal busybox with one that might cause issues... Better to use the resetprop tool to change the device fingerprint to the stock 6P one of you can't pass SafetyNet on that ROM.
What is it that doesn't work? Details, please...
Click to expand...
Click to collapse
If i remove universal safetynet fix module i got fules pass[emoji34] so resetprop tool fix that ??
I search for resetprop tool and got nothing can u pls give a like for that، i know im ask to much [emoji28]
Sent from my Nexus 6P using Tapatalk
Didgeridoohan said:
Ok. We need to clear things up....
I see you have a whole bunch of modules installed and like I said, your log looks good. But when asked for details you only mentioned iYTBP and Android mic fix as not working. This is where I would like some details. How do you know that the modules don't work? What have you tested? What is the expected behaviour and what are you seeing?
Let's start with something that's easy to test: busybox. Open a terminal emulator and type busybox. If nothing happens, run the command as su. Does it show a list of all the applets available?
Click to expand...
Click to collapse
Use all modules not work،
I install the module ok then i go test it nothing happen..
Like utube first i download the the module iytbp and first time work perfect also fix mic and jamesDSP module for better sound work all perfect but after second time reboot all modules show in magisk but when i test every modules not working like i dont have any modules there [emoji36]
Sent from my Nexus 6P using Tapatalk
hk48 said:
If i remove universal safetynet fix module i got fules pass[emoji34] so resetprop tool fix that ??
I search for resetprop tool and got nothing can u pls give a like for that، i know im ask to much [emoji28]
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
The resetprop tool is a part of Magisk. I've written a bit about in the troubleshooting guide (start under "Matching official prop values to pass SafetyNet").
hk48 said:
Use all modules not work،
I install the module ok then i go test it nothing happen..
Like utube first i download the the module iytbp and first time work perfect also fix mic and jamesDSP module for better sound work all perfect but after second time reboot all modules show in magisk but when i test every modules not working like i dont have any modules there [emoji36]
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Those screenshots clearly show that the busybox module is working so things are Magic Mounting as they should. How do you test the modules?
Didgeridoohan said:
The resetprop tool is a part of Magisk. I've written a bit about in the troubleshooting guide (start under "Matching official prop values to pass SafetyNet").
Those screenshots clearly show that the busybox module is working so things are Magic Mounting as they should. How do you test the modules?
Click to expand...
Click to collapse
By use there effect app like module iytbp i check the utube work like normal utube، and jumesDSP module i use there app and not see any change when i switch things..
… ..
After besybox imgs i send is that should told u everything is running??? U dont see anything wrong [emoji47][emoji47][emoji47]
Sent from my Nexus 6P using Tapatalk
hk48 said:
By use there effect app like module iytbp i check the utube work like normal utube، and jumesDSP module i use there app and not see any change when i switch things..
… ..
After besybox imgs i send is that should told u everything is running??? U dont see anything wrong [emoji47][emoji47][emoji47]
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
The busybox screenshots do tell me that everything is working as it should.
The iYTBP Youtube app looks just like the normal Youtube (unless you use the black themed version). It removes ads and brings background playback to the app. If you're seeing ads it might be because you didn't uninstall updates for the stock Youtube app or you let it update through the Play store (you should disable updates for Youtube when using this module).
The audio module might simply be incompatible with your device or you may have another audio mod that is conflicting. Ask for advice in the module support thread.
Didgeridoohan said:
Everything looks fine in your log. Unless you really need it though, I'd recommend removing the Universal SafetyNet Fix module. It replaces Magisk internal busybox with one that might cause issues... Better to use the resetprop tool to change the device fingerprint to the stock 6P one of you can't pass SafetyNet on that ROM.
What is it that doesn't work? Details, please...
Click to expand...
Click to collapse
Didgeridoohan said:
The busybox screenshots do tell me that everything is working as it should.
The iYTBP Youtube app looks just like the normal Youtube (unless you use the black themed version). It removes ads and brings background playback to the app. If you're seeing ads it might be because you didn't uninstall updates for the stock Youtube app or you let it update through the Play store (you should disable updates for Youtube when using this module).
The audio module might simply be incompatible with your device or you may have another audio mod that is conflicting. Ask for advice in the module support thread.
Click to expand...
Click to collapse
What can i say، when u say disable update ? the only thing i dont check it is update im really sorry for wist ur time oh god i feel so ?? for not check that before post ???
For iytbp module now work fine
And another modules i will check one by one، dont worry i will not wist ur time like that ،،
Im really sorry.
Have a good day sir