Related
Goldenleaf is a rewrite from stock lg kernel with almost all the newest features. Made for the best battery life.
(for performance go on franco.Kernel-GBS below)
.news
111206
...reverted blackscreen fix
...system should be a bit smoothier
111205
...fixed blackscreen bug.
...no noise when phone wakeup
...a little change in touchscreen driver
...all I/O schedulers activated.
...Noop as default I/O scheduler
111126
...fixed some incompatibility with some apps [games reported by users]
...reverted touchscreen driver. now it's the stock LG 2.6.32 again [gbs kernel will still have the brand new one backported from .35]
...cpu spike fix enabled -> more battery
...axis inversion workaround still disabled -> more battery
...SLUB Memory Allocator.
111122
...blackscreen bug fix for "screen on" animation removed
...no more darkscreen
...new touchscreen driver, based on my new driver made for gbs, backported from LG 2.6.35 source
...does not have axis inversion workaround
Kernel Source: https://github.com/fserve/goldenleaf
Click to expand...
Click to collapse
Goldenleaf.v111206 http://www.mediafire.com/?o3avtm5yjrbv1qa
Goldenleaf.v111206-LG http://www.mediafire.com/?p8j4xwmwazkfa46
Know bugs in most updated goldenleaf version:
none.
GBS is an modified version of franco.Kernel v19.4, original franco.Kernel code is heavily patched for the best performance. With this mod is added more battery life, some changes in kernel config, cpu spike on touch the screen fix, better axis inversion workaround, USB-transfer fix, Powertop/dmesg support, and for froyo based roms users, recharging with phone off fix.
- Recharging with phone off fixed. (mikos cyanogen based roms have a feature to: if the phone is off, when you plug the charger, it will power on the phone. The normal behaviour is to boot a system only to recharge phone. But mik has disabled it. SO, if you use devoid.#final this recharge while offline will work. if you use cyanogen, will not work.)
what's new in:
gbs.v20a
...blackscreen fix reverted
...more little touches on touchscreen driver
...deadline I/O scheduler as default
...deadline I/O scheduler patched
...cfs vsync on
...bfs vsync off
gbs.v20
...vm_max_readahead patched, will automagically get the best value for it. (mad patch, thanks franciscofranco)
...slub patch
...fsync patch
...kernel upgraded to 2.6.32.49
...blackscreen bug fix
...all I/O schedulers are activated
...Noop as default I/O scheduler
...smartass as default governor.
...[CFS-ONLY] with agroup patch as always, since franco 19.4
...axis inversion workaround off
...newfix, expect 50% cpu use on touch, smoothier.
...oldfix, expect 25% cpu use on touch, faster and battery saving.
gbs.v19.2
..faster (disabled some optimizations that are not helping at all)
..power drivers reverted
..temp reporting should be fixed
..wifi drivers reverted
..kernel upgraded to 2.6.32.48
gbs.v18c
..added some patches
..fix camera flicker
..[cfs-only] enabled automatic group patch. (better multitasking)
Click to expand...
Click to collapse
BFS franco.Kernel-gbs.v20a-gamer http://www.mediafire.com/?gc4o4yu774hkhz3
CFS franco.Kernel-gbs.v20a http://www.mediafire.com/?9r5yktkamy21wiz
BFS franco.Kernel-gbs.v20-gamer http://www.mediafire.com/?531huxx14xsp794
CFS franco.Kernel-gbs.v20 http://www.mediafire.com/?adbhrppo8icu5yy
Testing release:
Test it for: Blackscreen (Ps. don't use "screen on" animation). And screen lag to wakeup.
gbs-testing-noop-lg http://www.mediafire.com/?4v5p7doybvfdprl v20a with noop as default i/o scheduler and stock lg touchscreen driver
gbs-testing-deadline-lg http://www.mediafire.com/?efoceag8fhglqq9 v20a with deadline as default i/o scheduler and stock lg touchscreen driver
Know bugs in any GBS version:
AndroSS does not work;
BFS: Brain F**k Scheduler - The updated and improved process scheduler. BFS is better for user interactions.
CFS: Completely Fair Scheduler - The original process scheduler. CFS is better for multitasking.
Click to expand...
Click to collapse
About governors:
smartass is the best governor for me when i want raw performance - http://forum.xda-developers.com/showpost.php?p=16467430&postcount=5362
conservative when i want battery with good performance.
Click to expand...
Click to collapse
TIPS FOR THE BEST BATTERY LIFE
NO AWAKE APPS
Sync off
WiFi off
BT off
Data off
2G
Minimum brightness
...and pray for good quality signal
This can help: http://forum.xda-developers.com/showthread.php?t=1179809
Click to expand...
Click to collapse
How to use it? Just download and Flash via ClockworkMod Recovery.
Remember:
This kernel is ONLY for LG Stock ROM 2.2, Void.#forever, devoid, miks 6.5.x, CyanogenMMatt 1.1...
WIPE DALVIK, BATTERY AND CACHE!
DONT FLASH 2 DIFFERENT ZIPS AT THE SAME TIME!
MAKE A REBOOT BEFORE EACH FLASH
If you are using AmonRa, disable signature before flashing.
NOT underclock below 480MHz. At lower speeds, wakeups-from-idle per second are bigger than 480MHz and they share the same voltage, so thats leads to more battery drain.
It's recomended to use: MIN 480 / MAX YOUR CHOICE
more about it: http://forum.xda-developers.com/showthread.php?t=999064
and here: http://forum.xda-developers.com/showpost.php?p=9704402&postcount=22
Click to expand...
Click to collapse
Results of my work:
http://forum.xda-developers.com/showpost.php?p=17296370&postcount=450 - 2d 3h
http://forum.xda-developers.com/showpost.php?p=17074123&postcount=264 - 2d 8h
http://forum.xda-developers.com/showpost.php?p=17430882&postcount=1446 - 3 days
http://forum.xda-developers.com/showpost.php?p=17516383&postcount=633 - 7 days!
some happy customers:
http://forum.xda-developers.com/showpost.php?p=16951313&postcount=87
http://forum.xda-developers.com/showpost.php?p=17003300&postcount=137
http://forum.xda-developers.com/showpost.php?p=17046619&postcount=197
http://forum.xda-developers.com/showpost.php?p=17050287&postcount=204
http://forum.xda-developers.com/showpost.php?p=17050411&postcount=205
http://forum.xda-developers.com/showpost.php?p=17050506&postcount=206
http://forum.xda-developers.com/showpost.php?p=17051156&postcount=209
http://forum.xda-developers.com/showpost.php?p=17061662&postcount=251
http://forum.xda-developers.com/showpost.php?p=17105840&postcount=302
http://forum.xda-developers.com/showpost.php?p=17111202&postcount=311
http://forum.xda-developers.com/showpost.php?p=17129410&postcount=314
http://forum.xda-developers.com/showpost.php?p=17134152&postcount=315
http://forum.xda-developers.com/showpost.php?p=17264084&postcount=416
http://forum.xda-developers.com/showpost.php?p=17391053&postcount=530
http://forum.xda-developers.com/showpost.php?p=17444315&postcount=584
http://forum.xda-developers.com/showpost.php?p=17447137&postcount=587
testing camera:
http://forum.xda-developers.com/showpost.php?p=17024566&postcount=164
Click to expand...
Click to collapse
Adobe Flash Player 10.2 that works with p500: http://www.androidcampus.in/2011/10/adobe-flash-player-102-for-armv6-and.html
Adobe Flash Player 10.1 that works with p500: http://forum.xda-developers.com/showthread.php?t=1147092
Touchscreen Booster: http://forum.xda-developers.com/showthread.php?t=934500
How to reduce power consumption: http://www.thinkwiki.org/wiki/How_to_reduce_power_consumption
Nice power monitor app for android http://ziyang.eecs.umich.edu/projects/powertutor/
Greetz from Manaus/Amazonas - Brazil!
Curious findings thank you for taking the time to test all that ****. Tell me, why are you adding USB as a module?
Just to get the suspend mode that powertop recomends.
fserve said:
Just to get the suspend mode that powertop recomends.
Click to expand...
Click to collapse
It's possible to suspend USB while it's not being used having it configured as a module?
I dont know for sure, since that p500 uses usb in slave mode.
But if this really works, as powertop says, i can get more battery life
So, lets test
Sent from my LG-P500 using XDA App
flashing i'll give you feedback in a couple days, thanks for taking your time on this. - Thumbs up - Obrigao! haha.
fserve said:
I dont know for sure, since that p500 uses usb in slave mode.
But if this really works, as powertop says, i can get more battery life
So, lets test
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
I'll try your .config changes tomorrow as I'm going to push 2.6.32.45
I've made more cleanups, testing right now.
Will release later.
do we need to flas zram after this?????????
i meant "flash" zram.zip... which was needed in fk... which is the base of this kernal.... and i was just asking!!!!!!!!!! sry about the typing error.....
Hi Fserve, thanks for your work, I have a question... You have removed things for keyboards, this means I can or cannot use a bluetooth keyboard? I'm asking this before purchasing such keyboard, thanks!
orsonbear said:
Hi Fserve, thanks for your work, I have a question... You have removed things for keyboards, this means I can or cannot use a bluetooth keyboard? I'm asking this before purchasing such keyboard, thanks!
Click to expand...
Click to collapse
You can use! That keyboard option removed was an legacy linux hack thing to restart the computer via keyboard. (sysrq magic key)
About zram, it is enabled in the kernel, if you have flashed it in any version of franco.Kernel it will work here.
How?
Its simple, when you flash zram it will modify one part of your system, and kernel another. So you only need to reflash zram in case of wipe all data.
Sent from my LG-P500 using XDA App
fserve said:
You can use! That keyboard option removed was an legacy linux hack thing to restart the computer via keyboard. (sysrq magic key)
About zram, it is enabled in the kernel, if you have flashed it in any version of franco.Kernel it will work here.
How?
Its simple, when you flash zram it will modify one part of your system, and kernel another. So you only need to reflash zram in case of wipe all data.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
thnks man...
What about. config.zip.
Do i have to flash it or what?????
Sent from my LG-P500 using XDA Premium App
gkalenis said:
What about. config.zip.
Do i have to flash it or what?????
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
Dont waste your time with that! It's only for developers know what i changed in the original franco.Kernel
arielxarg said:
+1 to this.
no offense , but i just wanna find some info in this thread , and all i can see on the few pages back is people arguing about ****
maybe mod can make 1 thread for us to report JUNK post , or UNNECESSARY post.
Click to expand...
Click to collapse
I'll give you info about this kernel. fserve fetched my sources, changed the .config file to add/delete some functionalities just like he stated in the first post and he came here and shared it with everyone, and I'm glad he did because I'm definitely going to look up on his configuration changes. Other than that it's still my kernel. That's all the info I can give to you.
New version released. (IT'S ON THE FIRST PAGE)
V8 was compiled with -Os (to make a small kernel)
V12 was compiled with -O2 (to make a faster kernel)
V12 got cleaned up ethernet 10/100 drivers, some scsi drivers, some loggers, some debuggers, some useless stuff. for now, only bfs version.
Stop the offtopic here, please
fserve said:
V12 was compiled with -Os (to make a faster kernel)
Click to expand...
Click to collapse
You meant -O2 or something?
fserve said:
V12 got cleaned up ethernet 10/100 drivers, some scsi drivers, some loggers, some debuggers, some useless stuff. for now, only bfs version.
Click to expand...
Click to collapse
Good riddance.
dr.notor said:
You meant -O2 or something?
Good riddance.
Click to expand...
Click to collapse
oops, will edit.
Please, resolve their differences through PM and not detract the subject
@fserve good work ! when are more opinions about your kernel, and also when I have more time will prove it
"Since so many people were asking me for it, I've decided to share it with you guys."
"Disclaimer: I will only update this kernel when I have the time. So do not ask for ETA please."
Before installing this, please take your time to read the Original OP. in stratosk thread
This kernel contains every features that the Semaphore Kernel offers but with some additional custom features.
Features
- Linux kernel 3.0.69
- LiveOC
- Custom Voltage
- Voodoo Sound
- BLN & CM LED
- 384MB - 409MB available RAM
- Compiled with Linaro 4.7.3
- O3 optimization
- Auto brightness driver
- Touch Wake
- Vibration intensity
- Deep Idle
- USB host driver
- Governor ondemand (default)
- ondemand: sampling_down_factor tunable by momentum, smooth_ui
- Governor conservative (module, smooth_ui)
- Governor smartassV2 (module, smooth_ui)
- Governor interactive (module)
- Noop I/O scheduler (default)
- Deadline I/O Scheduler (module)
- Simple I/O Scheduler (module)
- ROW I/O Scheduler (module)
- CFQ Scheduler (module)
- CIFS as module
- TUN as module
- Logcat disabled (as module only)
- Standard network packet scheduler
- Kernel log buffer size 4KB (from 128KB)
- Reduced debug info
- TinyRCU
- Fast Charge
- WiFi PM_MAX when suspend
- CWM: AROMA Filemanager
- /system/etc/init.d directory creation if not exist
Custom Features
Swap/Zram enabled
Normal OC'd over LiveOC
1.1 - 1.4GHz
In-call Volume Hack
Voodoo Color
Entropy Tweaks
Load_freq(4*HZ+61) to avoid Loadavg Moire
arm/crypto: Add optimized AES and SHA1 routines
Backport AIO (Asynchronous IO) from Linux 3.5
Zen IO Scheduler
BFQ IO Scheduler
IntelliDemand CPU Governor
Lulzactive CPU Governor
Wheatley CPU Governor
UKSM 0.1.2.2
Plus more features to come in near future....
By installing this, you'll receive no support from Stratosk because;
This is an Unofficial Semaphore Kernel
Stratosk does not support it
So do not bug him if you have a problem with this kernel. But bug me instead!
If you guys want to see some more features added to this, feel free to tell me and I'll try my best to add them to it.
Change log
Please note that there are 3 variations:
Normal versions: for CM10 or ROMs without hugemem configuration, available RAM 384MB - 396MB
"s" versions: for Slim Bean ROM or patched ROMs with hugemem configuration, available RAM 397MB - 409MB
"vc" versions: is Voodoo Color Mod
Everything is the same as the original kernel except with few changes.
added a zram script below in a zip file. IT IS NOT FLASHABLE EXTRACT AND MANUALY PUSH AND SET PERMISIONS. push to
system/etc/init.d if you want diffrent sizes pm me of post on this thread. each has 20% swapiness for now if you want more tell me here
enter this hitting enter after each line
adb root
adb remount
adb push <file> /system/etc/init.d/<file>
adb shell
su
chmod 755 /system/etc/init.d/<file>
reboot
all I did was compile this kernel for vibrant i take almost no credit for it
credits go to
stratosk: http://forum.xda-developers.com/member.php?u=3750240 he is the maker of original semaphore kernel
and Nick0703: http://forum.xda-developers.com/member.php?u=3443526 he is the guy from captivate forums who added the extras
as these guys did everything but build the modified version for vibrant. if you want to use in your rom pm me and il problebly say yes. and be sure to give credits to stratosk and nick0703
Uhm you should probably quote these lines, "
Nick0703 said:
Since so many people were asking me for it, I've decided to share it with you guys.
Disclaimer: I will only update this kernel when I have the time. So do not ask for ETA please.
Click to expand...
Click to collapse
As that was a response to the captivate community.
Sent from my SGH-I897 using xda app-developers app
Sent from my SGH-T959 using xda premium
Would love to see this kernel on the fascinate. I've attempted to port over the original kernel from source but I must suck. Lol
cannondaleV2000 said:
O yeah. Totaly forgot
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Gosh man get it together! Have you tried it out with test I sent you to see how it was working? Or was it bugging out because I built the kernel with original semaphore and not yours?
Sent from my GT-i9000 using xda app-developers app
new build
new build up for vibrant il post change log tomorrow. no problems
Hey man, can you also port the "s" version of this kernel, for the slim ROM for greater memory
Thanks for your work
This is the s version. Woth voodoo color too
Sent from my SGH-T959 using xda premium
cannondaleV2000 said:
This is the s version. Woth voodoo color too
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Ah, oh, OK... just noticed... Sorry.
I think it would be great -though- if it's also reflected on the thread's title , I.e. 2.9.20sv, instead of 2.9.20v...
cannondaleV2000
You mention that:
Please note that there are 3 variations
Click to expand...
Click to collapse
I only see an attached file Unofficial_Semaphore_JB_2.9.20s_vc_v
Is this file for all three variations? I only need a kernel for Normal versions: for CM10 or ROMs without hugemem configuration.
Thank you very much for the additional features.
Sorry forgot the other 3 Gina add them tonight when I update source
Sent from my SGH-T959 using xda premium
new build
hey sorry if you used the build i did lastnight and got bootloops but im just about to upload a updated one heres the change log expect the new one up in about a half hour.
change log
Quote:
2.9.21c
- Linux kernel 3.0.72
- binder: backport from 3.9-rc (also port some other changes to support this)
- lowmemorykiller: updates from 3.9-rc
- logger: updates from 3.9-rc
- disable android_ram_console (thanks to dark_knight35)
- mDNIe: suppress some debug messages (and do so minor cleanup)
- Auto brightness: calculate the average of light sensor adc values instead of normalized brightness
- Auto brightness: Intoduce max_br_threshold tunable. Over this, the brightness is updated to its max value (thanks to Necromancer3)
- Lowmemorykiller: Intoduce a white list with PIDs (up to 6) that never been killed (use: echo "PID1, PID2" > /sys/module/lowmemorykiller/parameters/w_list)
- CWM 6.0.3.0
- built with Linaro 4.7.3 201303
- add option to Semaphore Auto Brightness for parabolic function (echo 0 > /sys/devices/virtual/misc/sema_autobr/linear)
New Feature:
- Added frandom (much faster random number generator)
download will be in op in about 30 minutes
Bad upload? Two attachments are much smaller.
lbw321 said:
Bad upload? Two attachments are much smaller.
Click to expand...
Click to collapse
Yeah those two attachments are bad. Op needs to recompile them.
Sent from my SGH-I897 using xda app-developers app
sorry
Nick0703 said:
Yeah those two attachments are bad. Op needs to recompile them.
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
re compiling now
testing now
alright guys im testing new builds now again. and il upload this afternoon after school. yes i have school if i get a chance to upload from my phone later before i get home i will
cannondaleV2000
Installed Unofficial_Semaphore_JB_2.9.21v, I am assuming that this is the newly uploaded built. Right after entering the OS, my phone rebooted into the recovery. This might have been caused by kernel choosing 1400hz frequency. Now the frequency is set to 100 - 1000 and so far your kernel works good. I will keep you posted if I notice any irregularities.
Is it ok to use Semaphore Manager with your kernel or should we use CM10 built in OC features?
I installed Voodoo sound app but I can't see voodoo color option at the bottom. Am I doing something wrong?
Thank you so much for your hard work with extra features!
Yeah you can use the semaphore app. Or cm performance settings or any tools for controlling CPU that you want. I recommend set CPU. Worth paying a little bit
Sent from my SGH-T959 using xda app-developers app
On my phone your kernel seems to work fine, however I tried to install this kernel to my friend's phone and it caused vicious bootloop. I had to resort to ODIN to be able to make the phone work again. I tried this twice and both times kernel caused bootloop.
Both I and my friend have exactly the same CM 10.1 built. Just very strange.
Also I sill don't know how to access voodoo color. Zram and KSM seem to be missing from the performance menu.
Perhaps anyone else can confirm my findings.
fixing now
Orochi77 said:
On my phone your kernel seems to work fine, however I tried to install this kernel to my friend's phone and it caused vicious bootloop. I had to resort to ODIN to be able to make the phone work again. I tried this twice and both times kernel caused bootloop.
Both I and my friend have exactly the same CM 10.1 built. Just very strange.
Also I sill don't know how to access voodoo color. Zram and KSM seem to be missing from the performance menu.
Perhaps anyone else can confirm my findings.
Click to expand...
Click to collapse
i know there are some problems. im waiting for a reply from the dev whos source i use than il fix it
Hey guys
As you already might have read in either the CM11 dev thread or the Q&A section, I am working on a custom kernel for our T210(R) and T211. It's still in a pretty early stage, but the current build is fully stable, so I thought why not share it
As I'm pretty new to this community, a few words about myself: My (only) device I have been working on is the LG Optimus 4x HD, for which I also made a custom kernel (also named werewolf kernel, who would have thought of that ). Me and 2 other fellow RDs were able to "switch" many blobs with the ones from grouper, which fixed many, many issues we were facing in 4.4 with the stock 4.1 blobs. I am the official maintainer of namelessROM and vanir for the 4x HD, and am also compiling GummyROM, LegoROM, unofficial CM 11 (using grouper blobs) and SlimKat for the 4x HD on a nightly base. And as soon as we have a proper device tree for our tab, I'm sure I can port the Tab3 to all those ROMs
Now, enough chit chatting, let's talk about the kernel
It's based on @ketut.kumajaya's blackhawk kernel (thanks again, mate ) From v004 on we are based on official KitKat sources, with some additions such as:
Features:
Various network tweaks
Entropy tweaks
I/O speed improvements
cortex a9 and neon omtimizations
Added frandom
Tweaked vm dirty ratios
Dynamic read-ahead values
Added I/O schedulers: ROW, SIO, BFQ, FIOPS, V(R)
Optimized AES and SHA1 routines
Added CPU governors: Lionheart, Adaptive, Intellidemand, Hotplug, Hyper
Reduced RAM usage from logger
Updated lowmemkiller
Overclocked to 1.420 GHz by default
Disabled vsync for better 2D performance
Overclocked GPU up to 624MHz (default 416MHz)
Custom user voltage control (CPU)
Undervolted by default (-25mV)
S2W and DT2W (WIP)
Fast Charging
KSM
Bugs:
You tell me!
Installation:
Download the kernel from HERE
Reboot into recovery (recommended to make a nandroid)
Flash the kernel zip
Recommended to wipe /cache
Reboot and enjoy!
And remember to remove phservice if you want to change some CPU/GPU settings yourself
Notes:
See 2nd post
GPL:
Kernel sources
Kernel Modules (only for v001 - v003)
Used defconfig
Used build script
Thanks:
@ketut.kumajaya for the initial kernel base
@gr8nole for general help, info and testing
XDA:DevDB Information
Werewolf kernel SM-T210/T211, Kernel for the Samsung Galaxy Tab 3
Contributors
laufersteppenwolf
Kernel Special Features: Tuned for best possible performance
Version Information
Status: Stable
Created 2014-07-21
Last Updated 2015-05-25
Tweaks and other stuff
Since v002, we have an updated lowmemorykiller. It behaves a bit snappier than the old one, also with the default minfree values. However, in case you like to tweak your device a bit to make it even more snappy (like me ), I tweaked the minfree values a bit to slightly increase the free RAM without really affecting the multitasking experience. The script can be found in the attachment. All you need to do is to extract the script and place it in your /system/etc/init.d/ folder and that's it. The values will be automatically set on boot.
UV interface
The min possible voltage is 1000mV for now, and the max one is 1400mV. If you want me to lower the min voltage, please let me know.
Also, please note, that the voltage has to be changed in 12.5mV steps. If you apply for example 1110mV, it will be rounded down to 1100mV.
Fast Charge interface
The main interface is inside /sys/kernel/fast_charge/*
/sys/kernel/fast_charge/force_fast_charge (rw)
0 - disabled (default)
1 - use custom mA configured through the sysfs interface (see below)
/sys/kernel/fast_charge/ac_charge_level (rw)
rate at which to charge when on AC (1.8A to 2.3A)
/sys/kernel/fast_charge/usb_charge_level (rw)
rate at which to charge when on USB (0.5A to 1.0A)
/sys/kernel/fast_charge/failsafe (rw)
0 - disabled - allow anything up to 2.3A to be used as AC / USB custom current (USE WITH CAUTION!)
1 - enabled - behaviour as described above (default)
/sys/kernel/fast_charge/version (ro)
display fast charge version information
New kmsg layout
From v008 onwards the kmsg looks a tiny bit different. Instead of displaying the time since boot, it logs the actual time and date.
Now, you may ask yourself: "does that any good?" Sure it does. When you encounter an issue and grab a log, you can send it my way saying "the issue happened at 15:35". It is way harder to find out the exact time (in seconds) since the device booted, right?
When changing the CPU gov, you might want to keep THIS (4.1) or THIS (4.4) in mind
Changelog:
v008 [15/02/15]
- Disabled zcache
- Added KSM (including deferred timer to save battery)
- Tweaked zRAM
- New kmsg log layout (see 2nd post for more details)
- Fixed kernel version in settings
- Disabled S2W and DT2W by default
When you flash this version, please wipe cache, otherwise bad things could happen
v007 [08/12/04] RIP Beth
- Slightly more RAM from logger
- S2W and DT2W (Still WIP)
- Decreased min possible CPU voltage to 800mV
- Undervolted by default (-25mV)
- Fast Charge support
v006 [01/11/14] MOAH CPU
- Added CPU UV interface
- OC'ed further to 1420MHz
- Max GPU freq limited to 624MHz until all issues are resolved
- Fixed init.d support on T211
v005a Minor fix
- Fixed DeviceControl GPU support
- Output all GPU freqs in Hz instead of KHz
v005 [18/10/2014] SM-T211 support
- Added support for the T211 variant (thanks to @sscsps for testing)
- Merged latest Sammy updates
- Enabled I/O accounting (only needed for devs)
- zcache enabled by default
- GPU OC up to 624MHz (default is 416MHz)
v004 [25/09/2014] Android 4.4 support
- Re-based on latest KitKat sources
- Re-added almost all features from v003
- Removed 156MHz freq step (causing trouble for still unknown reasons)
- Overclocked to 1.344 GHz (instead of 1.205GHz)
- Disabled vsync for better 2D performance
- Disabled "reboot recovery" to avoid being stuck in recovery on old recoveries (special version)
v003 [31/08/2014]
- new govs: Hotplug, Hyper
- new freq step @ 156MHz
v002 [25/07/2014]
- reduced RAM usage from logger
- new/updated lowmemkiller (see attachment in 2nd post for init.d script with tweaked minfree values)
v001 [18/07/2014]
- initial release
good work you link where ? and nice job workıng 4.1.2 ???? 4.2.2 .4.4.2 kernel android version what? @safariking [MENTION=3034891]gr8nole[/MENTION
not working dont flash ı using ultimate rom safarinking by 4.1.2 soft brick device
Not working yet hope you get it working good luck
Sent from my SPH-L720 using XDA Premium 4 mobile app
sorry guys, I just found the issue... my last commit breaks the GPU module so it doesn't compile, doesn't get copied over into the zip and so does not get replaced on your system, but the new kernel cannot load the stock module as I used another defconfig name...
Will be fixed ASAP
EDIT: Fixed and uploaded
laufersteppenwolf said:
sorry guys, I just found the issue... my last commit breaks the GPU module so it doesn't compile, doesn't get copied over into the zip and so does not get replaced on your system, but the new kernel cannot load the stock module as I used another defconfig name...
Will be fixed ASAP
EDIT: Fixed and uploaded
Click to expand...
Click to collapse
Nice work. This kernel works. Will monitor battery life and game performance.
Sent from my SM-T210R using XDA Free mobile app
laufersteppenwolf said:
When changing the CPU gov, you might want to keep THIS in mind
Click to expand...
Click to collapse
is there anyway to flash it on tab 3 t211 kk 4.4.2 firmware
big job thank can you add overclock gpu ? downclock?
gr9nole said:
big job thank can you add overclock gpu ? downclock?
Click to expand...
Click to collapse
You can check if there is OC available by installing "No-Frills CPU Control" from the google play store
a question about toolchain
@laufersteppenwolf
hi, i would like to know which toolchain you used to build this kernel, a direct link to it would be helpful.
also, using the supplied defconfig can i make [defconfig] and then make -j# or are there additional things to do?
i build kernel for tab3 10 fine but setting up my system for sm-t210 is proving stubborn. there is another project going on
that i would like to learn from and help with, your help would be appreciated.
thank you for reading.
m
Anil Shovo said:
is there anyway to flash it on tab 3 t211 kk 4.4.2 firmware
Click to expand...
Click to collapse
I do not think so, as I'm using the ramdisk from t210, which most likely isn't compatible with t211, and sure not with 4.4.2
gr9nole said:
big job thank can you add overclock gpu ? downclock?
Click to expand...
Click to collapse
step by step
moonbutt74 said:
@laufersteppenwolf
hi, i would like to know which toolchain you used to build this kernel, a direct link to it would be helpful.
also, using the supplied defconfig can i make [defconfig] and then make -j# or are there additional things to do?
i build kernel for tab3 10 fine but setting up my system for sm-t210 is proving stubborn. there is another project going on
that i would like to learn from and help with, your help would be appreciated.
thank you for reading.
m
Click to expand...
Click to collapse
for this build, I used CM's 4.6 toolchain, but that'll change soon
I will also push the build script and modules to github ASAP, so just wait for that, as setting up the modules and stuff isn't the most pleasant thing to do
Werewolf is not playing lol so what your saying is that we will be having cm 11 and aosp all the good stuff soon ?
Sent from my SM-T210 using XDA Premium 4 mobile app
I've used this kernel for 2 days. I have noticed the screen flickers on the 2nd day and while watching a movie (while plugged in) the tab was battery drained battery was 30% when I started watching. Can others confirm this?
Goodside. Battery life is enhanced and performance is the same. Nice work on this
Sent from my SM-T210R using XDA Free mobile app
trazfer said:
I've used this kernel for 2 days. I have noticed the screen flickers on the 2nd day and while watching a movie (while plugged in) the tab was battery drained battery was 30% when I started watching. Can others confirm this?
Goodside. Battery life is enhanced and performance is the same. Nice work on this
Sent from my SM-T210R using XDA Free mobile app
Click to expand...
Click to collapse
I was experiencing the exact same flickering myself as well, but on stock kernel
This flickering isn't kernel related, but ROM related. Sammy must have screwed up the auto backlight handling, as it only happens at some certain brightness values
No ir blaster
Edit: This is what I get when I open peel smart remote
laufersteppenwolf said:
I was experiencing the exact same flickering myself as well, but on stock kernel
This flickering isn't kernel related, but ROM related. Sammy must have screwed up the auto backlight handling, as it only happens at some certain brightness values
Click to expand...
Click to collapse
He is tottaly right, also sometimes when you are using this tab, the screen locks by itself
Ripshock said:
No ir blaster
Edit: This is what I get when I open peel smart remote
Click to expand...
Click to collapse
Check your build.prop to see what the ro.build.product shows.
gr8nole said:
Check your build.prop to see what the ro.build.product shows.
Click to expand...
Click to collapse
I am using stockrom series with a build for sm-t210 but I have used device spoofer and spoofed my original build sm-t210r
Ripshock said:
I am using stockrom series with a build for sm-t210 but I have used device spoofer and spoofed my original build sm-t210r
Click to expand...
Click to collapse
It works for me with the stock firmware/rom with this kernel.
Thunderoar Kernel For SM-T116
(Tab 3 Lite 7.0 3G)
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, corrupted partition, nuclear disasters
* Please do some research before using this mod!
* YOU are choosing to make these modifications,
* If you point the finger at me for messing up your device, I will laugh at you.
Features:
Overclocked
Deferred Timer for KSM
USB Fast Charge
Arch Power
Frandom
Powersuspend for battery life/saving
QuickWakeup for battery life/saving
Dynamic Sync Control
Fsync control on/off
Voltage Tweak
NVS hibernate driver
Multicore Power Saving
Schedule workqueues on awake CPUs to save power
CPU Boost
Adaptive Low Memory Killer
Software CRC control toggle
Gentle Fair Sleepers toggle
and so on...
CPU Hotplug:
AutoSMP
Added CPU governors:
Sprdemand
Conservative
Ondemand
Userspace
Powersave
Interactive
Performance
and so on...
Planned Update
-nothing i guess
Bugs(s)
-No MORE BUG!
Custom kernel Installation:
Download the kernel from here
Choose the tar.md5 if flashing from odin
Choose the zip files if flashing from custom recovery
Choose the latest version
Odin Instruction:
Open any version of odin
Choose your tar.md5 file from AP Tab
And Start
Custom Recovery Instruction:
Reboot into recovery if usin zip files (recommended to make a nandroid)
Flash the kernel zip
Reboot and enjoy!
Stock kernel Installation:
Download the stock kernel from here
Enter recovery mode, choose install, choose install image,
and then go to the directory of your downloaded stock kernel
choose it and then check mark on the boot circle.
And then flash it :good:
Notes:
20/12/2107
Kernel Update!!
Thunderoar-Kernel 5.0 Codenamed "Angel Beats!"
Fix all issues regarding MTP not working
and random reboot, is this a comeback? xD, i don't know xD
It appears that my kernel uses a lot more memory than i expected,
Possibily some problem with memory patch in the kernel source
The workaround for this problem is you have to increase your disksize
In the kernel adiutor, if it stays at 300mb, it will not enough and cause a problem
Which is stuck or complete crash of device. Recommended size is 500mb or more if
you encountered it again and set swappiness into 60
20/11/2017
Im back guyss, im out for awhile because my current kernel are sucks,
So i got a new phone which is Samsung J5, im developing kernel for the J5 for my
my own use, Not for sharing others because it will hurt my reputation XD,
and from that i learned a lot more about developing a good kernel,
Im goin to update the kernel using newer source, and im able to fix the
MTP and random reboot issues which is make me happy, its going out soon,
So if you guys still usin this device, you can use the new kernel that i will
post soon.
5/7/2017
For those of you who had a booting problem,
the V4.1.1 probably will fix it
3/7/2017
Finally, an actual stable one,
Rebuilt from the newest source from scratch
-V4.1-revived-version
22/6/2017
The new one probably the most stable,
been testing it for a week and so
far no problem or frequent reboot happen or
something like that
7/5/2017
Finally!!! Camera are fixed guys!
MTP functionality is still unconfirmed
Sorry for the long wait ^-^
1/1/2017
I decided to release a maintenance release update cause i found
that the device crash many times throughout all my kernel
and i decided to think about it more seriously and i had made
a maintenance release for you and report me if there still
crash happening on the device
27/12/2016
I wanted to release the kernel a little bit early cause
busy with new year celebration.The latest one is Thunderoar Kernel v2.6
Happy New Year to all of you!! sorry if i'm being too early
18/12/2016
I'm going get the new kernel ready next month which is the new year.
I'm gonna support SM-T113 too next year and continue with it *if it's working*
I'm going to need tester for sm-t113 next year
1/11/2016
enable the usb fast charge using the kernel adiutor app!
Camera are working on the stock kernel but not mine...
The source code for the camera is not exist in the source...
If you wanna connect your device to pc make sure the
USB fast charge is off,if it isn't disabled,you won't able to
manage file on your device through pc
XDA:DevDB Information
Thunderoar Kernel, Kernel for the Samsung Galaxy Tab 3 7.0
Contributors
@Thunderoar
Credits:
@Osm0sis-For the Anykernel2
Github
Kernel source
Version Information
Status: Stable
Current Stable Version: Angel Beats! || 5.0
Stable Release Date: 2017-12-24
Created 2016-12-26
Last Updated 2017-12-24
Press the "Thanks" button if you appreciate my work or if i helped you
Can you Make Sm-T210 dernek werewolf v003 kernel add overclock And your tweaks??
gr9nole said:
Can you Make Sm-T210 dernek werewolf v003 kernel add overclock And your tweaks??
Click to expand...
Click to collapse
Ok,but what android you are currently using right now?Kitkat or JB?
Changelog:
V5.0 Codenamed "Angel Beats!" (2017-12-24)
+Kernel upstream version 3.10.17->3.10.108
+Gpu update
+Fix MTP
+CPU Frequency change 200MHz upto 1.5GHz
+Entropy Update
+Multicore Power Saving
+CPU Boost
+Arch Power
+Power Suspend
+Quickwakeup
+Read-ahead set to 512kB
+Adaptive Low Memory Killer
+Software CRC control
+Gentle Fair Sleepers
+Fsync On/Off
+Built from scratch and fixed random reboot
+Dynamic Fsync
-Removed Obselete Cpu Governor
-Removed Obselete I/O Scheduler
-Removed UKSM and use normal KSM
V4.1.1 update (2017-7-5)
+Fix some devices not booting
+New CPU Hotplug: AutoSMP
V4.1 update (2017-7-3)
+Just another update for stability
V4.0 update (2017-7-3)
+No more Reboot or similar effect - Tested
+Linux kernel downgraded into 3.10.32 temporarily because rebuilt from scratch
+Auto cpu boost on input without predefined frequency
+UKSM(Ultra Kernel Samepage Merging)
+LZ4 Z-RAM - Faster Memory
+Asynchronous Fsync -Faster storage management
+USB Fast Charge are back
-Removed cpu governor: OndemandX, Zzmoove, Scary *Temporary*
V3.4 update (2017-6-22)
+The most stable kernel that i've ever built
+Linux Kernel 3.10.44
+No more frequent reboot or similar effect
+Bug fixes
V3.3 update (2017-6-17)
+Linux Kernel 3.10.40
+Properly fix the bug that mentioned on the v3.2 update and lower the risk of instability
+A bunch of cpu governor
*Hotplug
*Lionheart
*Reworked version of intelliactive
*Ondemandplus
*OndemandX
*Hyper
*Zzmoove
*Nightmare
*Wheatley
*Badass
*Scary
*All of them are properly functioning and tuned for compatibility
and if you want the hotplug features, use the hotplug governor provided
+Bug Fixes
-Adaptive cpu governor removed parmanently
V3.2 update (2017-6-8)
+Update: Linux Kernel 3.10.37
+Update: Using the latest Anykernel2 zip
+Update: Minimum frequency change into 254MHz and also voltage change for nice battery lasting
+Update: cpu-boost set to 765MHz and running for 3 seconds when touch detected
+Update: Set CFQ as default scheduler
+Fix: Bug that cause long running app either in the background or foreground to freeze/lagging/reboot etc.
+Fix: Bug that cause the device to reboot randomly
+Fix: Bug that cause the graphic being not working/properly lagging or some sort
+Fix: Bug that cause the device to reboot or freeze when standby
+Fix: Bug that causing the kernel to working improperly/lagging/rebooting/unstable after a while
+Bug fixes
V3.1 update (2017-5-7)
+CPU Frequency minimum change -> 384MHz
+Fix Frequency bug stuck at 768MHz
+Faster charging
V3.0 update (2017-5-7)
+Kernel version updated from 3.10.22 - > 3.10.26
+Using updated Anykernel zip
+Frequency: changed into 1600Mhz and minimum is 386Mhz
+GPU: function updated
+Deferred Timer working as it is
+LZ4 compression
+"Schedule workqueues on awake CPUs to save power" are back
+Remove conflict between Samsung touch booster and my CPU-Boost so you can actually set the amount you want
for boost
+Sync threshold for cpu-boost are not set
+I/O scheduler default to deadline
+Fsync are on by default
+TCP Congestion Algorithm set default to Westwood which is the fastest for network usage
+Additional TCP Congestion Algorithm are added
+Additional tweak to make the kernel faster
+Camera Fix!!!
+MTP Function (unconfirmed)
+A whole lot of bug fixes
-sprdemand governor
-Fastcharge (for now)
V2.8 update (2017-1-31)
+Frequency: changed into 1660Mhz and minimum is 580Mhz
+Cpu-boost: defined stable values
+Less OS tearing
+Fastcharge updated
+Audio functionality improved
+Voltage: change for low-power use
+Many bug fixes
+Selinux: updated
-Automatic Cpu Hotplug: removed for better stability but with little to no battery drainage but you still can deactivate the cores through Kernel Adiutor
-Sprdemand: removed
V2.6.1-MR1 update (2017-1-1)
*Note:This is maintenance release therefore some features may temporarily unavailable
Add: cpu-boost currently disabled but provided as an option
Add: voltage change
Add: frequency change from 386Mhz to 1600Mhz for more stable
Fix: serious bug that causing switching off mobile data make it freeze/crash
Fix: bug that causing the device freezing/crash throughout all my kernel update release
V2.6 a.k.a *Almost* New Year Update (2016-12-27)
+Kernel version updated from 3.10.17 - > 3.10.22
+Frequency step changed to make it more stable
+GPU overclocked upto 640Mhz
+CPU-Boost re'added,improve stability and Frequency set
*"Schedule work queues on awake CPU to save power"
\_disabled by default because instability issue on booting but kept as an option in Kernel Adiutor
\_Its pretty unstable so i didn't recommend you to use it
+This updates focus heavily on stabilily,sound,memory and networking
+Zswap Added
+Zbud Added
*Swappiness level turn down to 10 to avoid using swap as much as possible but use it when low memory
\_The reason of me to use swap as low as possible is RAM is faster than swap,so use that for better
\_application loading.
*No more SOD(Sleep Of DEATH) OR FOD(Freezing Of DEATH) as it happen many times on my older kernel
\_but it *may* happen
+Voltage increased for more stability
+Dynamic Sync re'added and enabled by default
+Fsync turn off by default
+Overall entropy tweak
+SIO,SIO-Plus scheduler re'added
-Row scheduler
V2.0 a.k.a November update (2016-11-1)
+1650 mhz re'added and step changes
+Fsync on/off re'added
+Row scheduler re'added
+Intelliactive Governor re'added
+BLX(Battery life extender) added
+Adaptive Governor added
+Lagfree Governor added
+Schedule work queues on awake CPU to save power
+Fixed unused frequencies on kernel adiutor
+Improved networking capability
+Improved memory management
+Improved security so you don't have to install antivirus
+Improved web browsing
+Improved device battery
-Dynamic sync have to go for now
-cpu boost removed because of compability issue
V1.7 (2016-10-15)
+Deferred Timer
+Cpu boost frequency set
+Updated Dynamic sync control
+Interactive governor updated and used as default governor
+HUGE bug fixes (better than before)
-Fsync On/Off (parmanent maybe)
V1.3 (2016-09-25)
+NVS hibernate driver
+LZ4 compression support
+Snappy compression library (v3)
+Many bug fixes(It is very smooth,surprisingly)
+Frequency changed to 1650MHz
-intelliactive governor (for now)
-row i/o scheduler (for now)
-sioplus i/o scheduler (for now)
V1 (2016-09-20)
+Initial Release
How about for the SM-T211 on KKat ?
,
,
Be great too...
Sent from my SM-T211 using Tapatalk
andynroid said:
How about for the SM-T211 on KKat ?
,
,
Be great too...
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
yea,i can do that,but instead of asking me to do it,the others had made custom kernel for your phone..why wont u use them?
Thunderoar said:
yea,i can do that,but instead of asking me to do it,the others had made custom kernel for your phone..why wont u use them?
Click to expand...
Click to collapse
The only kernel available for the SM-T211 is Werewolf and it is not a good build besides the OP has vanished...
Sent from my SM-T211 using Tapatalk
The only kernel available for the SM-T211 is Werewolf and it is not a good build besides the OP has vanished...
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
I see..but are you willing to be the tester if i finally made it? bcause, i dont have that kind of device
Thunderoar said:
I see..but are you willing to be the tester if i finally made it? bcause, i dont have that kind of device
Click to expand...
Click to collapse
Sure why not.....[emoji3]
Sent from my SM-T211 using Tapatalk
andynroid said:
Sure why not.....[emoji3]
Sent from my SM-T211 using Tapatalk
Click to expand...
Click to collapse
ok,good,gonna start downloading the source code soon[emoji4]
Thunderoar said:
Ok,but what android you are currently using right now?Kitkat or JB?
Click to expand...
Click to collapse
jb 4.1.2 android please
sample werewolf kernel v003 good kernel add your tweaks oc ... thanks
note:I have tab 3 sm-t210 I now test kernel
ı using jb
Thunderous thank you very much for your kernel
Thunderoar I too lite sm t116, thanks for the kernel, a big request, you can port the cyanogen (11,12,13) or lilipop, I can help in testing and finding a donor for porting.
natttroll said:
Thunderoar I too lite sm t116, thanks for the kernel, a big request, you can port the cyanogen (11,12,13) or lilipop, I can help in testing and finding a donor for porting.
Click to expand...
Click to collapse
yeah,i'm currently compiling and test it,but it's to much build error while compiling it..
sorry not updating the kernel for so long,currently busy building marshmallow for our device
it's been 3/4 days i'm working on the rom,it's omnirom btw not cyanogenmod,omnirom is a little bit easier
Thunderoar said:
yeah,i'm currently compiling and test it,but it's to much build error while compiling it..
sorry not updating the kernel for so long,currently busy building marshmallow for our device
it's been 3/4 days i'm working on the rom,it's omnirom btw not cyanogenmod,omnirom is a little bit easier
Click to expand...
Click to collapse
:good: Thunderoar, i will be waiting for your rom. :fingers-crossed:
Thunderoar your kernel works well, bug kamera.Good luck for omnirom, rom super. (I'm sorry Do not know English, google translate translation).
Thunderoar :good: ,updated kernel i will test.
SM-T116NU
Can this kernel be used for SM-T116NU?
fleomikn said:
Can this kernel be used for SM-T116NU?
Click to expand...
Click to collapse
Yes you can,and just wanna let you know,this kernel I test is with device sm-t116nu which I use everyday,so all gonna be fine
Thunderoar said:
Yes you can,and just wanna let you know,this kernel I test is with device sm-t116nu which I use everyday,so all gonna be fine
Click to expand...
Click to collapse
Oh. It's sound great. I'll flash it righ now. Many thanks!
One question more
Same device with you, can you help me, its about "xposed framework"
fleomikn said:
Oh. It's sound great. I'll flash it righ now. Many thanks!
One question more
Same device with you, can you help me, its about "xposed framework"
Click to expand...
Click to collapse
Ok, what can I help?
AR_Beast™ Kernel
Hey there! Ayush Here
INTRO
After a lot of hard work, I am debuting at the kernel section for a new custom kernel based on latest sources by LOS. As the name suggest, these kernel is made as a All-Rounder,i.e it can provide better battery + performance . Without talking much lets go the features of these kernel.
MAIN FEATURES
CPU
Proper and Uniform Frequency Table Format.
Overclocked CPU to 1.7GHz for big cluster and1.2GHzfor little cluster (for Beast Performance).{Modified and Enhanced by me)
Support for more Governers
Darkness
Impulse
BarryAllen
ElementalX
Intel
Smartmax_eps
Lionfish
Optimized Interactive and ElementalX Governer.
System wide PowerEfficent Workqueue(for Beast Battery Backup).
[*]CPU-Boost,Hotplug Boost and Wakeup Boost
[*]Reduced CPU Load(for Beast Battery Backup).
[*]Fixed High Load average(for Beast Battery Backup).
Fast idling of CPU (for Beast Battery Backup).
Less CPU-Load=Cool Device=More Battery-Life
Various Optimizations.
Hotplugs
Added Alucard (Modified for Beast Battery Backup)
Added Thunderplug (Modified forBeast Battery Backup)
Disabled MSM_Performance hotplug (was of no use)
Thermal
Support for user controllable thermal driver which reduce CPU frequency On a set trip point ( Ported by me )
Default limit set to 50°
Advanced Core control mode
Quad core mode
Fully configurable in the adiutor
Various Optimizations
GPU
Altered GPU-Frequency Table (for Beast Battery Backup)
UnderClock GPU to 19MHz(for Beast Battery Backup)
Overclock GPU to 650MHz
Support for Adreno Idler
Various Optimizations
Battery
Enabled ARCH_Power (for Beast Battery Backup)
New PowerSuspend algorithm (for Beast Battery Backup)
Support for preventing unnecessary WakeLocks (for Beast Battery Backup)
ThunderCharge Current Control Driver v2.1.
Fast Charge Drivers
Incresed Charge current (1370)
Various Optimizations
Sound
FauxSoundControl v4.0 ( Modified and Enhanced by me)
Support for 2 Gains---Headphones, Speaker.
Provides ability to Increase or Decrease Volume beyond Default Limits.
Support for Controlling Volumes separately for left and right Headphones.
Dts sound support
Negative values works too
Display
Kcal Colour control v2
Uses custom colour profile by default for better screen vibrancy, colour reproduction (Enhanced by me)
Support for Glove Mode
Various Optimizations
MISC
Latest Linux Base 3.10.108
Based on latest sources.
Compiled with Uber 7.2.1 Optimized ToolChain
O3 and Graphite Optimizations
Support for FRandom RNG Driver (upto 50x faster than the default one).
Support for various Wake-Up Gestures including DT2W.
State Notifer support (faster and better)
Nvidia power optimizations
Varoius tweaks for better network speed
Support for Dynamic Fsync
Various Optimiztaions For Cpu and GPU
F2FS and exFAT Support
Kexec Hardboot
Support for Load Shifter Mechanism.
Various Tweaks for better battery+performance.
Supports Every MM and N roms
Added LCD notifier
Added Quick Wakeup driver
Exclusive Kernel Adiutor for configuring
This are the features which I Remember many features are omitted due to word limit
I have tried my level best to make my kernel as best as possible. From minor tweaks to major improvements, everything is done.
Installation Instructions
Boot into recovery (twrp recommended)
Wipe cache and dalvik cache
Flash AR_Beast™-Kernel Rxx.zip
Reboot to system
Done
XDA:DevDB Information
*AR_Beast* Kernel, Kernel for the YU Yureka
Contributors
Ayush Rathore
Source Code: https://github.com/AyushR1/AR_Beast-Tomato
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 9
Stable Release Date: 2018-01-29
Created 2018-01-29
Last Updated 2018-01-29
DOWNLOAD
R9 - Oreo(8.0/8.1) - https://www.androidfilehost.com/?fid=818070582850488842
Kernel-Adiutor-Mod - https://forum.xda-developers.com/android/apps-games/kernel-adiutor-mod-v6-t3740249
Telegram Group :- https://t.me/joinchat/AAAAAEEtgBFuVYjNE2yRbA
NOTES
1. Use AR_Beast Adiutor to apply settings(prebuilt in kernel zip)
2. Always turn on Apply on Boot and set Delay to 10 seconds or more
3. Always turn on Emulate Init.d option in Kernel Adiutor.
4. If you are facing WiFi/Hotspot issue then check whether your system partition has atleast 20mb free then reflash kernel or Extract wlan.ko from the .zip of kernel (located under system/lib/modules/) and place it in root/system/lib/modules/ overwriting the one already present there. Then, set the permission of the file to rw-r-r and reboot the phone. Use ES File Manager with Root Permission to do this.
5. Facing splashloops(loops on yo logo) then clean flash your rom or wipe data/cache/dalvik-cache
6. Don't use any hotplug along with core control or quad core mode if you wanna use hotplug then disable corecontrol and quad core mode. You can use Core control along with quad core mode.
PRO Sir!!
Thanks for Oreo Support Bro.,
Can we use it for nougat also ?
Will R9 version Support Nougat?
Please reply me. If not which ROM is preferrable to install? Suggest me.
Has anyone tested if this kernel works fluently with NitrogenOS 8.1 ROM ? Please do confirm as this kernel looks so tempting.
The kernel Adiutor mod is broken. Can u give another link.
da_gamer_pk said:
has anyone tested if this kernel works fluently with nitrogenos 8.1 rom ? Please do confirm as this kernel looks so tempting.
Click to expand...
Click to collapse
bro i am using this rom with my nitrogen os shekhawat 20180208 , it works super fine on nitrogen, trust me u can go with this kernel, everything is working fast and smooth
Wlan.co file is missing from the directory you mentioned. Where can I get that file? My wifi/hotspot does not work. Other than this this kernel works perfectly with nitrogen os 8.1.
thanks .. need the link for auditor mod ?
Ayush Rathore said:
NOTES
1. Use AR_Beast Adiutor to apply settings(prebuilt in kernel zip)
2. Always turn on Apply on Boot and set Delay to 10 seconds or more
3. Always turn on Emulate Init.d option in Kernel Adiutor.
4. If you are facing WiFi/Hotspot issue then check whether your system partition has atleast 20mb free then reflash kernel or Extract wlan.ko from the .zip of kernel (located under system/lib/modules/) and place it in root/system/lib/modules/ overwriting the one already present there. Then, set the permission of the file to rw-r-r and reboot the phone. Use ES File Manager with Root Permission to do this.
5. Facing splashloops(loops on yo logo) then clean flash your rom or wipe data/cache/dalvik-cache
6. Don't use any hotplug along with core control or quad core mode if you wanna use hotplug then disable corecontrol and quad core mode. You can use Core control along with quad core mode.
Click to expand...
Click to collapse
hi bro, thanks .. need the kernel auditor link, i guess its not in the build , or please tell how to use it
Kernel auditor link not working.
Please provide a new one.
praveen139 said:
Can we use it for nougat also ?
Click to expand...
Click to collapse
Yes its working perfectly in Lineage 14.1 and pubg works without lag issue
---------- Post added at 11:11 AM ---------- Previous post was at 11:06 AM ----------
jaydeep darandale said:
Wlan.co file is missing from the directory you mentioned. Where can I get that file? My wifi/hotspot does not work. Other than this this kernel works perfectly with nitrogen os 8.1.
Click to expand...
Click to collapse
get that wlan.ko from another kernel for you yureka and paste inside the kernel in module folder use zarchiver
Hariprasad01 said:
Yes its working perfectly in Lineage 14.1 and pubg works without lag issue
---------- Post added at 11:11 AM ---------- Previous post was at 11:06 AM ----------
get that wlan.ko from another kernel for you yureka and paste inside the kernel in module folder use zarchiver
Click to expand...
Click to collapse
Ive tried my level best to replace and even re compress the "wlan.ko" but nothing is working for me...
cannot open the wifi and hotspot shows error.. what can i do.. please help.. even tried re-flashing everything..
Wifi and hotspot not working.!!
This feels to be the best and the smoothest kernel that I've used till date, but the wifi and hotspot is not working. No matter what i do, even tried wlan.ko file from another kernel still its not working please help. I am using RR os and even on clean flash it is not working. Please help...
Could anybody please answer my question!!!
Shreyas Parashar said:
This feels to be the best and the smoothest kernel that I've used till date, but the wifi and hotspot is not working. No matter what i do, even tried wlan.ko file from another kernel still its not working please help. I am using RR os and even on clean flash it is not working. Please help...
Click to expand...
Click to collapse
I seriously am waiting for my reply,, please help me with the wifi fix!!!
Kernel is discontinued.
A second more
Ayush Rathore said:
Kernel is discontinued.
Click to expand...
Click to collapse
Can u just help me withthe way to wifi fix.?
help me with building of this kernel with my battery 4000maH
Ayush Rathore said:
Kernel is discontinued.
Click to expand...
Click to collapse
i am trying to build kernel from your source, (in ubuntu c9.io cloud )
but i get failed with errors, using tomato-nougat brach and GCC-prebuilt-8 toolchain
i think your build.sh contains many different command for ubuntu to understand ! isn't ?
help