Related
I have a D-Link DHD-131 Mainstage WiDi adapter, supporting Miracast because it runs WiDi 3.5 firmware (correct me if this is not correct). I can find the device, but when I try to connect the D-Link says that it has found a device that wants to connect and after a few seconds the message disappears. The Xperia on the other hand is just patiently counting down from 120 seconds to 0 and except that does nothing.
Are there any people that use Screen Mirroring? If so: did it work with your adapter? What brand adapter are you using?
DJFliX said:
I have a D-Link DHD-131 Mainstage WiDi adapter, supporting Miracast because it runs WiDi 3.5 firmware (correct me if this is not correct). I can find the device, but when I try to connect the D-Link says that it has found a device that wants to connect and after a few seconds the message disappears. The Xperia on the other hand is just patiently counting down from 120 seconds to 0 and except that does nothing.
Are there any people that use Screen Mirroring? If so: did it work with your adapter? What brand adapter are you using?
Click to expand...
Click to collapse
I have tried connecting to a Samsung AllShare Cast Hub, which may not be 100% MiraCast compatible, but according to some video on YouTube it also works with the LG Optimus G Dual (also a 1080p phone)
I found the following issues:
Connection is 'successful' but screen remains black and no sound is transmitted
On one occasions I somehow managed to hear my phone's sound through my TV - haven't managed to do so since
WiFi is disabled (indicated by a pop-up message) as soon as screen mirroring is activated, and re-enabled after the screen mirroring connection is closed!!!
The first 2 items may be compatibility issues, but the third one surprised me and is probably a limitation in the Xperia Z. While the Galaxy S3 can have WiDi and WiFi active at the same time, the Xperia Z apparently cannot
Edit: note that in order to connect to the dongle, I had to press a button on it first. Before pressing the button, I would just keep seeing the same countdown timer you describe here. Maybe that helps somehow?
Sjaakbanaan said:
I have tried connecting to a Samsung AllShare Cast Hub, which may not be 100% MiraCast compatible, but according to some video on YouTube it also works with the LG Optimus G Dual (also a 1080p phone)
I found the following issues:
Connection is 'successful' but screen remains black and no sound is transmitted
On one occasions I somehow managed to hear my phone's sound through my TV - haven't managed to do so since
WiFi is disabled (indicated by a pop-up message) as soon as screen mirroring is activated, and re-enabled after the screen mirroring connection is closed!!!
The first 2 items may be compatibility issues, but the third one surprised me and is probably a limitation in the Xperia Z. While the Galaxy S3 can have WiDi and WiFi active at the same time, the Xperia Z apparently cannot
Edit: note that in order to connect to the dongle, I had to press a button on it first. Before pressing the button, I would just keep seeing the same countdown timer you describe here. Maybe that helps somehow?
Click to expand...
Click to collapse
Hmm... My WiDi adapter had no buttons at all, only a reset-button. I tried resetting and pairing, but that didn't help. Thanks anyway for your reply, at least I'm not the only one having problems using the Xperia Z's Screen Mirroring function with 3rd party adapters... I wonder if there are any combinations of adapter/XZ that do work...
I have one TV in my house (Toshiba 55HT1U) that keeps getting turned on by the Chromecast. I turn the TV off, and then with a few minutes, the TV will be back on again. Unplug the Chromecast, and the TV stays off. I have tried multiple Chromecasts with the same results, I disabled Regza Link (Toshiba's HDMI-CEC), and it still keeps happening. This also happens whether the Chromecast is connected to my TV or to the receiver which is then connected to the TV. I have read where this particular TV suffers from this issue with other devices, but I wish there was a way to turn it off from the Chromecast end.
Right now, my solution is to go and unplug the Chromecast when I am not using it...hardly an elegant solution.
Have you check the manufacture website of your TV. I know some TV within the last few years, if it have a USB hook up, you can typically update the TV Firmware it may solve your problem. Just a shot in the dark. Also Chromecast is also getting an update.
jumpmanjay said:
I have one TV in my house (Toshiba 55HT1U) that keeps getting turned on by the Chromecast. I turn the TV off, and then with a few minutes, the TV will be back on again. Unplug the Chromecast, and the TV stays off. I have tried multiple Chromecasts with the same results, I disabled Regza Link (Toshiba's HDMI-CEC), and it still keeps happening. This also happens whether the Chromecast is connected to my TV or to the receiver which is then connected to the TV. I have read where this particular TV suffers from this issue with other devices, but I wish there was a way to turn it off from the Chromecast end.
Right now, my solution is to go and unplug the Chromecast when I am not using it...hardly an elegant solution.
Click to expand...
Click to collapse
GreenDroidX said:
Have you check the manufacture website of your TV. I know some TV within the last few years, if it have a USB hook up, you can typically update the TV Firmware it may solve your problem. Just a shot in the dark. Also Chromecast is also getting an update.
Click to expand...
Click to collapse
I have seen where some people have tried the update and it made no difference, but I will definitely try this when I get home tonight.
Find your HDMI-CEC options (whatever Toshiba calls it) and turn on HDMI-CEC but turn off Auto power. That will allow HDMI-CEC to switch to the right input but will not allow the HDMI-CEC to auto power the TV.
I have the exact same problem with a Toshiba 46G300U1 so let me know if you find a solution. It seems like a bunch of the Toshiba's all have this problem and I doubt Toshiba is going to fix it. I've tried various different kinds of options (connecting the Chromecast through a cable, a HDMI switch etc.). As long as the Chromecast is switched on and connected to the TV it always turns on automatically. Obviously disabling HDMI-CEC doesnt seem to help. I suspect there is a bug in the Toshiba that still keeps acting on HDMI-CEC signalsI am planning to file a support case with Chromecast as they are more likely to fix the problem (maybe an option to disable CEC on the Chromecast) than Toshiba. But since that is unlikely I am thinking maybe I can try a cable that doesnt properly support HDMI-CEC. It seems CEC is a separate wire and there are lots of people online complaining about cables that don't support CEC.
Try not powering your device via USB from the TV. (If you are) My LG TV seems to have issues with CEC from devices that get power from it via USB. Does weird stuff like this
So I tried updating the firmware on my TV...they said just put the new firmware on a USB stick, then plug the stick into the TV and it will automatically prompt you to start the install. Well, it didn't. I tried 2 different USB sticks with no success.
My "fix" was to just power the Chromecast WITH the USB port on the TV. That way the Chromecast is off when the TV is, so it won't try to turn it back on.
Great idea. I am connecting my USB cable to the TV's USB port for now. I might try connecting the Chromecast via my audio receiver later on. FWIW the firmware update did nothing to solve the issue on my TV.
I don't want to disable CEC on my TV, because I'd still like to have the CEC capability to turn on/off my home theatre automatically along with the TV. I can use USB power from the TV to power my Chromecast, but once the TV is on, my home theatre mutes automatically because it gives up control of CEC to chromecast. It's an unfortunate software decision made by Sony, the maker of my home theatre. I want the home theatre speakers to stay active, but Sony has programmed it to mute when another device on the same HDMI bus takes CEC control.
If you don't want your Chromecast to be a CEC-control device, meaning you don't want it turning your set on at all, or you don't want it overriding other CEC devices, just order lindy-usa.com part number 711110-1, which is a HDMI CEC Less Adapter, Female to Male, and put it inline with your Chromecast. It disables the CEC sense line from your Chromecast to your TV. Problem solved. Neall
hey guys, just got my Chromecast and works perfect in my 40" tv. but when I plug it into my new 60" toshiba smart tv the screen image is there but the whole picture is pink/purple. any ideas?
Sounds like you have a bad HDMI port or TV.
Hey, I'm having the same exact problem you are having. I have a 55" Toshiba Smart Tv and I originally purchased the chromecast on the first day it went on sale, came home and found everything to be in shades of Pink/purple. I returned it thinking it was a problem with the device since I've never had any problems with HDMI ports on the TVs and just got another chromecast device today and the SAME THING HAPPENED! I've tried all ports and the chromecast does not work on any (my blu-ray and other HDMI connected devices work fine on all of them ). Please let me know if you find a solution.
Thank you.
cottageboy said:
hey guys, just got my Chromecast and works perfect in my 40" tv. but when I plug it into my new 60" toshiba smart tv the screen image is there but the whole picture is pink/purple. any ideas?
Click to expand...
Click to collapse
4niner said:
Hey, I'm having the same exact problem you are having. I have a 55" Toshiba Smart Tv and I originally purchased the chromecast on the first day it went on sale, came home and found everything to be in shades of Pink/purple. I returned it thinking it was a problem with the device since I've never had any problems with HDMI ports on the TVs and just got another chromecast device today and the SAME THING HAPPENED! I've tried all ports and the chromecast does not work on any (my blu-ray and other HDMI connected devices work fine on all of them ). Please let me know if you find a solution.
Thank you.
Click to expand...
Click to collapse
If you have an HDMI audio receiver you can also just plug it into an HDMI port there too. I have mine plugged into my sony 7.2 receiver. Works fine, CEC and all.
Toshiba 47L6200U - same problem
4niner said:
Hey, I'm having the same exact problem you are having. I have a 55" Toshiba Smart Tv and I originally purchased the chromecast on the first day it went on sale, came home and found everything to be in shades of Pink/purple. I returned it thinking it was a problem with the device since I've never had any problems with HDMI ports on the TVs and just got another chromecast device today and the SAME THING HAPPENED! I've tried all ports and the chromecast does not work on any (my blu-ray and other HDMI connected devices work fine on all of them ). Please let me know if you find a solution.
Thank you.
Click to expand...
Click to collapse
I am also having this issue on my Toshiba Smart TV (Toshiba 47L6200U). Wanted to add that at one point I switched from USB power on the television to the wall charger, and the Chromecast went through an update during which time the progress wheel was in full color. Once it finished the picture then changed back to purple. Unfortunately I have no other devices to try to plug it into but there does appear to be a pattern with these sets.
Unfortunately I don't have a receiver and hadn't planed on getting one for this set up. I've never been able to connect the TV to the internet to perform any firmware updates so perhaps this may help? I'm really not sure. I also have seen that once it is updating - the rotating wheel is in the normal proper colors, however once it reverts back to the setup/welcome screen - it goes back to the shades of pink. I called up google and they said they've not heard of it so it seems to be a problem solely with the Toshiba XXL6200U series TV's. Have any of y'all performed the firmware updates?
gottahavit said:
If you have an HDMI audio receiver you can also just plug it into an HDMI port there too. I have mine plugged into my sony 7.2 receiver. Works fine, CEC and all.
Click to expand...
Click to collapse
4niner said:
Unfortunately I don't have a receiver and hadn't planed on getting one for this set up. I've never been able to connect the TV to the internet to perform any firmware updates so perhaps this may help? I'm really not sure. I also have seen that once it is updating - the rotating wheel is in the normal proper colors, however once it reverts back to the setup/welcome screen - it goes back to the shades of pink. I called up google and they said they've not heard of it so it seems to be a problem solely with the Toshiba XXL6200U series TV's. Have any of y'all performed the firmware updates?
Click to expand...
Click to collapse
Out of curiosity did you try the HDMI extender that came with your ChromeCast in case it is a connection issue?
I have the same TV, but have not received my chromecast yet. I'm wondering if it may be hdmi cec is off or on? I read up on this more and it may be the hdmi handshake that is causing the issue. It says to swap ends, try another cable etc.
gottahavit said:
Out of curiosity did you try the HDMI extender that came with your ChromeCast in case it is a connection issue?
Click to expand...
Click to collapse
zires said:
I have the same TV, but have not received my chromecast yet. I'm wondering if it may be hdmi cec is off or on? I read up on this more and it may be the hdmi handshake that is causing the issue. It says to swap ends, try another cable etc.
Click to expand...
Click to collapse
I tried using the extender that came with it, and also another one I had laying around the house. Neither of them worked.
I'm not really tech savvy so not sure what CEC is or how to turn it on or off. Getting frustrated trying to do the firmware update as well. I connected a USB with the firmware update on the root menu but for some reason the TV isn't recognizing the usb.
4niner said:
I tried using the extender that came with it, and also another one I had laying around the house. Neither of them worked.
I'm not really tech savvy so not sure what CEC is or how to turn it on or off. Getting frustrated trying to do the firmware update as well. I connected a USB with the firmware update on the root menu but for some reason the TV isn't recognizing the usb.
Click to expand...
Click to collapse
Cec is in the TV settings. Menu (on remote ), preferences, hdmi cec control setup, turn it on and see what happens.
Sent from my SPH-L710 using Tapatalk 4
Same issue
cottageboy said:
hey guys, just got my Chromecast and works perfect in my 40" tv. but when I plug it into my new 60" toshiba smart tv the screen image is there but the whole picture is pink/purple. any ideas?
Click to expand...
Click to collapse
I have an old 2007 vintage Toshiba 37X3030DB. If you have the Chromecast plugged into HDMI-2 (Digital only port), select that as the input port, then power on the Chromecast, it completely works as expected. However, change back to HDMI-1, then back to HDMI2 using the Toshiba remote, you get a permanent blue screen - even though the Chromecast thinks it's working.
Placed a tech support call with Toshiba UK to see if updated firmware beyond 2.9 will help...
I have a 2006 Westinghouse (it was one of the very first 1080P TV available). I have had issues with Pink screen screen with various HDMI devices. Usually turning the TV off and back on will fix the pink screen, usually on the first try though not always.
With the Chromecast this seem to work, but not anymore. It may or may not have to do with the update to FW 13300, I can't say for sure. But sadly the pink screen is more persistent now.
My Chromecast is connected to my Pioneer receiver and I found that if s switch back and fourth with another input I can eventually get rid of the pink screen. I works best if I wait and let the input receive a signal and at time it does take me several attempts before it works.
So just something to try.
don't know if this is related, but sometimes when you have a loose connection on say a pc monitor you will get a pink screen, it could be that the connection to your guys tv isnt fitting all the way in, might want to take a closer look. it could be that the mini usb thats connected to the Chromecast is weighing down on the chromecast and making it loose and thus creating the pink screen, might wanna look closer at the connection.
im trying to cast from computer.. chromebrowser, has worked perfect earlier. but now the picture is pink.. sounds work good... the chromecast background pictures shows fine when not casting anything...
If I use the built in cast option in youtube.com it was great.. but not when casting the whole page in chromebrowser..
i have a really bad connection at home, but it has worked on that before
cowsick said:
im trying to cast from computer.. chromebrowser, has worked perfect earlier. but now the picture is pink.. sounds work good... the chromecast background pictures shows fine when not casting anything...
If I use the built in cast option in youtube.com it was great.. but not when casting the whole page in chromebrowser..
i have a really bad connection at home, but it has worked on that before
Click to expand...
Click to collapse
This is my exact issue.
It isn't the HDMI port, it isn't faulty, or else every device would show the pink hue. The dongle itself isn't broken or else everything would be pink and not just tabs that are cast, like cowsick said, Youtube casts perfectly, just any other tabs.
Kinda blows, worked fine previously, an no one anywhere seems to be addressing the issue.
andrew2163 said:
This is my exact issue.
It isn't the HDMI port, it isn't faulty, or else every device would show the pink hue. The dongle itself isn't broken or else everything would be pink and not just tabs that are cast, like cowsick said, Youtube casts perfectly, just any other tabs.
Kinda blows, worked fine previously, an no one anywhere seems to be addressing the issue.
Click to expand...
Click to collapse
Green, gray or magenta are often the sign of decoding "nothing" meaning the data didn't reach the destination in time.
I would look to network latency caused by network congestion between the PC and Chromecast (on a bandwidth-limited connection, or are there other network transfers going on in the background?) and to transcoding latency on the computer casting to Chromecast (how busy is the CPU?). Try reducing the resolution via the Cast extension settings.
For direct casting to Chromecast via native apps, Chromecast can buffer and negotiate connection speed as necessary. When it's getting a tab casted over, there's a constant stream of frames being generated, compressed and sent over that need to be decoded - all in reasonable sync with the PC.
For example, in the case of MPEG-2 for DVD, there are Presentation TimeStamps (PTS) and Decode TimeStamp (DTS). PTS determines when a frame should be display (ie, 0:09;13 should be displayed 9 seconds, 13 frames in) while DTS determines when the frame's data need to be retrieved and decoded. If a frame can't be retrieved by the decode time (for example, because of a disc read error) usually the player will simply hold the previous frame, so you'll see a pause. But if the player actually tries to decode the data (for example, in a video editing program), you can see a frame of mainly or solid green, gray or magenta - an empty frame caused by decoding "nothing."
RojasTKD and BurnOmatic are right that a similar effect can be seen if HDCP handshake is broken or interrupted - there's a "garbage" screen that appears until HDCP re-synchronizes, but as andres2163 and cowsick say, if that was the case it should happen for any Chromecast output, not just tab casting.
Fix: disable hardware accelaration
Disabling hardware acceleration fixes the issue.
For detailed instructions, go to:
HTML:
learnhill.com/technology/fix-pink-screen-when-casting-tabs-with-chromecast/
My Chromecast recently stopped changing the input on my TV to the HDMI input the chromecast is connected to. Casting works, but I have to manually change input.
Chromecast will turn the TV on, but will not change the input.
I am using a Sony Bravia KDL-46HX701, casting from Android 4.4, and Windows 7.
My router is an ASUS RT-AC66U.
Thanks in advance for any suggestions.
arns said:
My Chromecast recently stopped changing the input on my TV to the HDMI input the chromecast is connected to. Casting works, but I have to manually change input.
Chromecast will turn the TV on, but will not change the input.
I am using a Sony Bravia KDL-46HX701, casting from Android 4.4, and Windows 7.
My router is an ASUS RT-AC66U.
Thanks in advance for any suggestions.
Click to expand...
Click to collapse
Make sure HDMI-CEC is enabled on your TV. Refer to the manual. Could be called something else.
I have a Sony Bravia also that had the same problem. When I added a new hdmi device, it stopped the chromecast from switching inputs. I unpluged the new device (a connector for my laptop) and the chromecast switched again. Unplug all hdmi cables from tv except chromecast and see if it switches. Then add cables one at a time. That is what worked for me. I hope it works for you!
DataAndroid said:
I have a Sony Bravia also that had the same problem. When I added a new hdmi device, it stopped the chromecast from switching inputs. I unpluged the new device (a connector for my laptop) and the chromecast switched again. Unplug all hdmi cables from tv except chromecast and see if it switches. Then add cables one at a time. That is what worked for me. I hope it works for you!
Click to expand...
Click to collapse
that's it! the new cable box is interfering with the chromecast for some reason.
were you able to resolve the problem somehow, or did you just stop using the second device?
arns said:
that's it! the new cable box is interfering with the chromecast for some reason.
were you able to resolve the problem somehow, or did you just stop using the second device?
Click to expand...
Click to collapse
Typically the cable boxes hdmi ports are 'always on'. Basically the TV thinks there is always a signal there. Even when the box is off. If you have comcast and an 'X1' box those boxes never turn off even when you use the power button on the remote.
I just left the second device unplugged. I don't use it regularly. I am glad that worked!
I'm having issues with my Chromecast 4 randomly dropping HDMI signal. It only happens when my receiver (Philips SoundStage HTL4110B/12 connected to HDMI-ARC port in Samsung TV) is active and it works in ARC mode (there is no problem with Bluetooth connection), so it seems to be a receiver- Chromecast 4 issue, because no other video source has this issue. The signal will drop out for a few seconds and I'll see black screen from my TV and then connection will be re-establish. Anad again, and again.
Tested ways to solve the problem: plugging Chromecast 4 in different ports on my TV. No results.