Database Develop

dont install beats installer

Tried and now my phone is stuck in the boot animation. I have tried to factory reset and to install the firmware using rsd lite. My battery wont charge and its almost out. Any ideas? Thanks.

Av8tor86 said:
Tried and now my phone is stuck in the boot animation. I have tried to factory reset and to install the firmware using rsd lite. My battery wont charge and its almost out. Any ideas? Thanks.
Click to expand...
Click to collapse
my battery is charging but I am still f'd

All your flashing problems will go away:
http://shop.teamblackhat.info/Factory-Adapters-motadapt.htm

mattlgroff said:
All your flashing problems will go away:
http://shop.teamblackhat.info/Factory-Adapters-motadapt.htm
Click to expand...
Click to collapse
What should I do to fix? Kind of a noob with this thing

How did you try to flash?
Sent from my MB886 using xda premium

Sticks210 said:
How did you try to flash?
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
Matt saved my butt on it. Got it figured out and couldnt be happier right now!!!

SirHoover2010 said:
Matt saved my butt on it. Got it figured out and couldnt be happier right now!!!
Click to expand...
Click to collapse
Elaborate?
Sent from my SAMSUNG-SGH-I997 using xda app-developers app

SirHoover2010 said:
Matt saved my butt on it. Got it figured out and couldnt be happier right now!!!
Click to expand...
Click to collapse
+1, please share in case other users make the same mistake.

darknessrise1234 said:
Elaborate?
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
RSD Lite and Fastboot. Got the files from http://forum.xda-developers.com/showthread.php?t=1853522. Also I didn't want to share specifics until we got the OP's phone figured out and fixed, which we did.

That happened to me the other morning it was bad. I used the firmware before the latest update through rsdlite and voila it came back to life! I wish we can use beats installer but sadly we cant. At least we didnt hard brick the device.
Sent from my MB886 using xda app-developers app

Hope this helps
Okay to start off I have bricked my phone through beats installer, I was pretty ticked, as most of you are. I brought my phone back to life and want to put everything I did to do so. I will put everything I did, if it actually helped or not, you would have to ask a Dev. Before I start thanks to Matt for the help.
Okay the first thing I did was go into recovery and wipe EVERYTHING (including cache)
I then attempted to flash the software from my sd card (I was desperate and had no idea what to do lol)
After a little more reading and finally getting my phone to charge (i wanted to let it charge for a while) I found out about RSD Lite (http://www.tucows.com/preview/853731)
I booted into my bootloader (fastboot) and connected to my computer. I had already opened RSD Lite and it recognized my phone. I then selected the software for my phone I found on a thread here (http://forum.xda-developers.com/showthread.php?t=1853522) and started the process. It around 10 min, so be patient.
A guy I talked to did the exact same thing for at least 2 hours and it finally went through. Keep at it and don't give up, hopefully this will help you get your phone working again

SirHoover2010 said:
Okay to start off I have bricked my phone through beats installer, I was pretty ticked, as most of you are. I brought my phone back to life and want to put everything I did to do so. I will put everything I did, if it actually helped or not, you would have to ask a Dev. Before I start thanks to Matt for the help.
Okay the first thing I did was go into recovery and wipe EVERYTHING (including cache)
I then attempted to flash the software from my sd card (I was desperate and had no idea what to do lol)
After a little more reading and finally getting my phone to charge (i wanted to let it charge for a while) I found out about RSD Lite (http://www.tucows.com/preview/853731)
I booted into my bootloader (fastboot) and connected to my computer. I had already opened RSD Lite and it recognized my phone. I then selected the software for my phone I found on a thread here (http://forum.xda-developers.com/showthread.php?t=1853522) and started the process. It around 10 min, so be patient.
A guy I talked to did the exact same thing for at least 2 hours and it finally went through. Keep at it and don't give up, hopefully this will help you get your phone working again
Click to expand...
Click to collapse
Still no go, so ill try downloading new firmwares. What rsdlite version do you use? Windows version too?
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
---------- Post added at 10:31 PM ---------- Previous post was at 10:22 PM ----------
Booted with BP Tools after another failed attempt and got this.
Edit2: I mean, which Windows are you using? Im on windows 8.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SGH-I997 using xda app-developers app

darknessrise1234 said:
Still no go, so ill try downloading new firmwares. What rsdlite version do you use? Windows version too?
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
---------- Post added at 10:31 PM ---------- Previous post was at 10:22 PM ----------
Booted with BP Tools after another failed attempt and got this.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
yes 5.7, make sure everything on your computer is up to date and you have the firmware that your phone shipped with. I actually had to update my phone when i was done.

SirHoover2010 said:
yes 5.7, make sure everything on your computer is up to date and you have the firmware that your phone shipped with. I actually had to update my phone when i was done.
Click to expand...
Click to collapse
I had done the update then rooted, but was trying to flash to remove root to RMA.

darknessrise1234 said:
I had done the update then rooted, but was trying to flash to remove root to RMA.
Click to expand...
Click to collapse
I was updated when I rooted too, make sure you use the version that shipped with your phone.

SirHoover2010 said:
yes 5.7, make sure everything on your computer is up to date and you have the firmware that your phone shipped with. I actually had to update my phone when i was done.
Click to expand...
Click to collapse
Tried first firmware and it fails on the very first part of script.

SirHoover2010 said:
I was updated when I rooted too, make sure you use the version that shipped with your phone.
Click to expand...
Click to collapse
Tried FFW version with a windows 7 computer on rsdlite 5.7 and it failed at first part. Downloading the updated firmware to see if that works.

also remember that you may have to run the software as an admin

theknub said:
also remember that you may have to run the software as an admin
Click to expand...
Click to collapse
Old firmware fails instantly, new firmware fails instantly until edits. After removing getvars, it fails at modem. Remove modem and it fails at system.img.ext4.

Firmware DROID RAZR M Verizon Jelly Bean 4.1.1 by "Firmware Team"

"FIRMWARE TEAM"
Presents:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Original Jelly Bean Fastboot Files for DROID RAZR M Verizon
Android 4.1.1 ---- 98.12.4.XT907.Verizon.en.US
VZW_XT907_4.1.1-9.8.1Q-27-2-4_1FF.xml.zip
DOWNLOAD​

Any chance you guys get the Telstra (AUS) firmware or run us Aussies through how to extract one from our devices?
Note we're BL unlockable if that helps.

How can we use this firmware on a retail version, knowing that BL is locked?
Any instructions/description will be greatly appreciated
Thx

safsaf_asm said:
How can we use this firmware on a retail version, knowing that BL is locked?
Any instructions/description will be greatly appreciated
Thx
Click to expand...
Click to collapse
you use this in conjunction with RSD Lite. put the razr m in fastboot mode, run rsd lite, browse for this, and extract & flash it. itll take a bit, but bring you back to fully stock 4.1.1

antp121 said:
you use this in conjunction with RSD Lite. put the razr m in fastboot mode, run rsd lite, browse for this, and extract & flash it. itll take a bit, but bring you back to fully stock 4.1.1
Click to expand...
Click to collapse
What's the benefit of this ROM? Is it an update to the jelly bean already out there?
Sent from my XT907 using xda app-developers app

Benifit is that we can look into the file now instead of OTA or Blind Flashing.
Also if you screw up u can Fast boot flash this Firmware with RDSLite.
Now my question is does any one have the JB AUSSIE Radio 4.1.1 ?
Or will the AUSSIE 4.0.x Radio work in here ?

Aussie radio from ICS works fine with this so far.. will test tomorrow in lte coverage area too.
Sent from my XT907 using Tapatalk 2

Works for me also on Verizon phone.
Still curious if we can get a Australia fast boot. I think theirs maybe less bloated ?
Again thanks for the fast boot files

Germanese said:
Works for me also on Verizon phone.
Still curious if we can get a Australia fast boot. I think theirs maybe less bloated ?
Click to expand...
Click to collapse
There's a tonne of Verizon bloat in these fastboot images that's for sure.. however, much of it is easily removed
Sent from my XT907 using Tapatalk 2

Did a factory wipe, and flashed just boot and system on my Aussie RAZR M.
Everything works except LTE. When it kicks over to LTE it can see the network and connect to it, but the data connection doesn't establish (ie the 4G symbol does not appear and data connectivity doesn't work, despite strong signal in a 4G area).
Any ideas on what may need to be tweaked to get LTE data to work? Data works fine on UMTS.
Sent from my XT905 using Tapatalk 2

apacheo said:
There's a tonne of Verizon bloat in these fastboot images that's for sure.. however, much of it is easily removed
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
So you're saying we can reimage an Telstra phone using the Verizon fastboot then separately pushing the radio fastboot afterwards?

wintermute000 said:
So you're saying we can reimage an Telstra phone using the Verizon fastboot then separately pushing the radio fastboot afterwards?
Click to expand...
Click to collapse
Just flash the system and boot partitions. However, lte doesn't seem to work. Gsm and umts do though.
Sent from my XT905 using Tapatalk 2

In the process of trying to get LTE going, I managed to fry it, so I'm going to have to do a re-install this afternoon. Only shame of it is, I don't live in an LTE coverage area, so I can't test.
So for me, it's a question of do I want smooth jellybean goodness with (at most) DC-HSPA, or do I want ICS with LTE ... grunt, why can't I have both!?
Sent from my Nexus 7 using Tapatalk 2

apacheo said:
In the process of trying to get LTE going, I managed to fry it, so I'm going to have to do a re-install this afternoon. Only shame of it is, I don't live in an LTE coverage area, so I can't test.
So for me, it's a question of do I want smooth jellybean goodness with (at most) DC-HSPA, or do I want ICS with LTE ... grunt, why can't I have both!?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Are you using an Aussie one?
Sent from my XT907 using Tapatalk 2

antp121 said:
Are you using an Aussie one?
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Sure am. Unlocked Aussie RAZR M (XT905)

apacheo said:
Sure am. Unlocked Aussie RAZR M (XT905)
Click to expand...
Click to collapse
And its LTE?
Sent from my XT907 using Tapatalk 2

antp121 said:
And its LTE?
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Of course it is
---------- Post added at 05:07 PM ---------- Previous post was at 05:06 PM ----------
apacheo said:
Of course it is
Click to expand...
Click to collapse
Having said that it's LTE, I've followed these instructions:
http://forum.xda-developers.com/showthread.php?t=1834511
Apparently this should get LTE working outside the US ... will give it a try when a chance avails.

I still don't get why we need this file because we already had the OTA and that's how I updated my phone through RSD Lite. Forgive me for saying this, but it's just my opinion.
Sent from my XT907 using xda app-developers app
---------- Post added at 09:18 PM ---------- Previous post was at 09:10 PM ----------
Just trying to understand more clearly is all. So I respect anyone who is uploading files ROMs for our phone. I truly believe this is the greatest Android phone on the market today.
Sent from my XT907 using xda app-developers app

alwaysbelieve1 said:
I still don't get why we need this file because we already had the OTA and that's how I updated my phone through RSD Lite. Forgive me for saying this, but it's just my opinion.
Sent from my XT907 using xda app-developers app
---------- Post added at 09:18 PM ---------- Previous post was at 09:10 PM ----------
Just trying to understand more clearly is all. So I respect anyone who is uploading files ROMs for our phone. I truly believe this is the greatest Android phone on the market today.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Simple. For people who have modded their ICS firmware, the OTA won't apply unless they revert to stock first. At least with this, they can flash jellybean, then mod their rom again.
Plus it's also nice to have something to reimage your phone with if you screw it up

camera JB
Are anybody can upload camera and gallery and all additional files from JB?

Firmware DROID RAZR M Verizon Jelly Bean 4.1.2 by "Firmware Team"

"FIRMWARE TEAM"
Presents:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Original Jelly Bean Fastboot Files for DROID RAZR M Verizon
Android 4.1.2 ---- 98.15.66.XT907.Verizon.en.US
VZW_XT907_4.1.2-9.8.1Q-66_1FF.xml.zip
DOWNLOAD
Android 4.1.2 ----
VZW_XT907_9.8.1Q-66-1_1FF.xml.zip
DOWNLOAD​

Perfect, a way to restore direct to 4.1.2.
Thank you!

If I have an unlocked bootloader, will this lock it?

scottocs said:
If I have an unlocked bootloader, will this lock it?
Click to expand...
Click to collapse
Nope. Your boot loader will stay unlocked through an RSD flash.
Sent from my XT907 using xda premium

Leraeniesh said:
Nope. Your boot loader will stay unlocked through an RSD flash.
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
It will overwrite recovery tho
Sent from my XT907 using Tapatalk 2

sloosecannon said:
It will overwrite recovery tho
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
However, you can manual flash system.img and boot.img from the zip through fastboot
Sent from my Nexus 7

Leraeniesh said:
However, you can manual flash system.img and boot.img from the zip through fastboot
Sent from my Nexus 7
Click to expand...
Click to collapse
Yep. Advise running fastboot reboot-recovery too to kill that stock recovery re-flasher script - TWRP does it automatically if you boot in, cwm asks you first
Sent from my XT907 using Tapatalk 2

Is there any reason to update to this if I was on 4.1.1 before but using custom ROMs now?
Will it update the radio or kernel for custom ROMs?

Can you flash this like any other ROM?
Also where can I get cwm for this phone
Sent from my XT907 using xda premium

This is meant for a clean install with RDSLite i believe.

Hello, I am running a stock RAZR M, but rooted when I first got it to remove bloatware.
I'm just looking to install the latest update (I keep getting the error message since I deleted the bloat apps, and I can't restore apps).
I dont think I "unlocked boot loader", because I don't even know what that it. I'm just trying to get this update on my rooted phone. Even if I lose root, I'm ok with that.
I'm pretty new to this, but have done some rom flashing on previous phones.
Once I download this file, do I install through Clockwork manager? Can I boot into system mode and install from .zip?
Thanks so much for your help!

jwiner said:
Hello, I am running a stock RAZR M, but rooted when I first got it to remove bloatware.
I'm just looking to install the latest update (I keep getting the error message since I deleted the bloat apps, and I can't restore apps).
I dont think I "unlocked boot loader", because I don't even know what that it. I'm just trying to get this update on my rooted phone. Even if I lose root, I'm ok with that.
I'm pretty new to this, but have done some rom flashing on previous phones.
Once I download this file, do I install through Clockwork manager? Can I boot into system mode and install from .zip?
Thanks so much for your help!
Click to expand...
Click to collapse
From my understanding, you can't update without all the bloatware.
And updating will remove root. You will have to reroot.
Sent from my XT907 using xda app-developers app

tolymatev said:
From my understanding, you can't update without all the bloatware.
And updating will remove root. You will have to reroot.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the quick reply Tolymatev, I was under the assumption that this file is the update. Is that not correct?

jwiner said:
Thanks for the quick reply Tolymatev, I was under the assumption that this file is the update. Is that not correct?
Click to expand...
Click to collapse
I think That's correct. I haven't used it I updated through ota update.
Sent from my XT907 using xda app-developers app

tolymatev said:
I think That's correct. I haven't used it I updated through ota update.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Cool, so can you advise an amateur the best/easiest mean to flashing the .zip file?

jwiner said:
Cool, so can you advise an amateur the best/easiest mean to flashing the .zip file?
Click to expand...
Click to collapse
I would go there and start searching.
I know most of the users had to install all the apps/bloatware that they deleted in their system/apps folder to be able to update.
http://forum.xda-developers.com/showthread.php?t=2237956
PSA: New Mantenance OTA rolling out!!!
Try this thread also.
http://forum.xda-developers.com/showthread.php?t=2246181
Bloat apps before OTA Update
Sent from my XT907 using xda app-developers app

Would anyone have an OTA update zip they pulled? I'll try to rewrite the script to ignore missing system apps and reupload it for you guys (and not touch su )
Sent from my XT907 on CM10.1 using Tapatalk 2

sloosecannon said:
Would anyone have an OTA update zip they pulled? I'll try to rewrite the script to ignore missing system apps and reupload it for you guys (and not touch su )
Sent from my XT907 on CM10.1 using Tapatalk 2
Click to expand...
Click to collapse
https://docs.google.com/file/d/0B-05eXAx4kW7YzZkLWVuQ3JKb28/edit?usp=drive_web
Sent from my XT907 using xda premium

sloosecannon said:
Would anyone have an OTA update zip they pulled? I'll try to rewrite the script to ignore missing system apps and reupload it for you guys (and not touch su )
Sent from my XT907 on CM10.1 using Tapatalk 2
Click to expand...
Click to collapse
THANK YOU!! I will wait for this!!! I am pretty intimidated by all of this - plus I have a 7 day old baby! Can't afford to brick my phone!!!
I'm just trying to get the update reminder off of my phone every 12 hours!!!

New Update and New Firmware

How to Unroot ATT Moto X?

Just rooted my ATT moto x using jcase's method (which was ridiculously easy). Now I'm curious how to unroot in case I get prompted with an OTA in the coming days.
Can anyone shed some light on the easiest way to do this?
Thank you very much.
Sent from my XT1058 using xda app-developers app

Flash stock firmware and recovery with either Rsdlite or fastboot. If you use fastboot you can preserve data.
The firmware is in the Dev section

bajasur said:
Just rooted my ATT moto x using jcase's method (which was ridiculously easy). Now I'm curious how to unroot in case I get prompted with an OTA in the coming days.
Can anyone shed some light on the easiest way to do this?
Thank you very much.
Sent from my XT1058 using xda app-developers app
Click to expand...
Click to collapse
As noted if you want to preserve data, just flash the recovery.img and the system.img from the stock firmware via fastboot and you'll be all set. I did it and works just fine. Be sure to use the firmware file for ATT.

Stupid question in 3...2...1. How do you flash stock firmware without having custom recovery?
Sorry
Sent from my XT1058 using xda app-developers app

@gunnyman already answered your question. You flash using rsdlite or fastboot.
Sent from my XT1058 using Tapatalk 4

Awesome thanks.
Sent from my XT1058 using xda apps developers app

Is this process very difficult? I have been prompted with an OTA and it will not go away.
Any suggestions?
Thanks
Sent from my XT1058 using xda app-developers app

No its easy. Just follow the instructions on the thread about flashing back to stock, but you probably should have already done it. You can just fastboot flash recovery and system without wiping and then reboot. Then accept the OTA.
Sent from my XT1058 using Tapatalk 4

I've always had Samsung devices so I'm used to Odin!
Will be interesting figuring this method out.
Thanks for the help
PS. Can you send me the link to the thread that has the instructions on how to do this? I can't find it searching. Thanks again
Sent from my XT1058 using xda app-developers app

bajasur said:
I've always had Samsung devices so I'm used to Odin!
Will be interesting figuring this method out.
Thanks for the help
PS. Can you send me the link to the thread that has the instructions on how to do this? I can't find it searching. Thanks again
Sent from my XT1058 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2446515

Delete. Returned to stock
Sent from my XT1058 using xda app-developers app

I am using a Mac so RSD lite isnt an option, when i boot into bootloader, fastboot commands dont work, any idea of how i can factory reset or go back to stock?

bstephens2u said:
I am using a Mac so RSD lite isnt an option, when i boot into bootloader, fastboot commands dont work, any idea of how i can factory reset or go back to stock?
Click to expand...
Click to collapse
Fastboot will work unless you're trying to downgrade. It will work with a locked bootloader because these are signed official images. All I can say is, make sure you have downloaded the correct file for your phone. If you're on Verizon, system flash won't work because the file size is too big. Just fastboot flash recovery recovery.img then reboot the phone and do a factory reset. This should take you back to stock.
Sent from my XT1058 using Tapatalk 4

thats what i was trying to do, the issue im having is when in fastboot and connected to the computer terminal no longer recognizes the device. even with ./adb devices or ./fastboot devices. I can't send any commands to the device using fastboot for some reason.

bstephens2u said:
thats what i was trying to do, the issue im having is when in fastboot and connected to the computer terminal no longer recognizes the device. even with ./adb devices or ./fastboot devices. I can't send any commands to the device using fastboot for some reason.
Click to expand...
Click to collapse
Sorry, but I'm not familiar with Mac enough to help. I'm sure someone can help you out though. I don't know if Mac and Linux are the same, but when I flash using fastboot on my Ubuntu machine, I have to do sudo fastboot flash or it won't work.

housry23 said:
Sorry, but I'm not familiar with Mac enough to help. I'm sure someone can help you out though. I don't know if Mac and Linux are the same, but when I flash using fastboot on my Ubuntu machine, I have to do sudo fastboot flash or it won't work.
Click to expand...
Click to collapse
rsd lite 6.1.4 is the only one that worked for me

Hey guys-
My questions is somewhat related to the OP, maybe not so much but I did not want to start a new thread.
Anyways...I got the Developer Version, how do I go about unlocking the bootloader, is there some moto site to do this like htcdev site?
Thanks in advance
EDIT: I am reading on some articles that it does already have an unlocked bootloader but I don't think that is the case on my device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Dodolom said:
Hey guys-
My questions is somewhat related to the OP, maybe not so much but I did not want to start a new thread.
Anyways...I got the Developer Version, how do I go about unlocking the bootloader, is there some moto site to do this like htcdev site?
Thanks in advance
Click to expand...
Click to collapse
Here you go, hope this helps
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my XT1060 using Xparent Cyan Tapatalk 2

Bill Idol said:
Here you go, hope this helps
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my XT1060 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
All good so far - Thanks

How to use the doucument inside this link(6.0?) and unlock Reactivation Lock?

http://forum.xda-developers.com/att-galaxy-s6/general/galaxy-s6-active-g890a-update-server-t3372114
Someone has successfully extract the updated file.
My system version is 5.1.1 G890AUCU3BOJE
How to use this?
I have flashed this file to root my phone https://mega.nz/#F!lJQj3JyR!Jky5Fhv0HySHIizJK-K1CA
It can root my mobile but after I flashed the version 5.1.1 G890AUCU3BOJE, the SAMSUNG Reactivation Lock is locked .
How can I unlock it?

tkp206093 said:
http://forum.xda-developers.com/att-galaxy-s6/general/galaxy-s6-active-g890a-update-server-t3372114
Someone has successfully extract the updated file.
My system version is 5.1.1 G890AUCU3BOJE
How to use this?
I have flashed this file to root my phone https://mega.nz/#F!lJQj3JyR!Jky5Fhv0HySHIizJK-K1CA
It can root my mobile but after I flashed the version 5.1.1 G890AUCU3BOJE, the SAMSUNG Reactivation Lock is locked .
How can I unlock it?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

tkp206093 said:
View attachment 3742659
Click to expand...
Click to collapse
OK. So after you sign in Samsung account then what happened?
Sent from my SAMSUNG-SM-G890A using Tapatalk

hovanhuang said:
OK. So after you sign in Samsung account then what happened?
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
After signing in, display fail so sad

hovanhuang said:
OK. So after you sign in Samsung account then what happened?
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse

hovanhuang said:
OK. So after you sign in Samsung account then what happened?
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
It is really my phone, but why can't I unlock?

hovanhuang said:
OK. So after you sign in Samsung account then what happened?
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
I found can double-click the home button to go to the camera, select the shooting mode, the option to download more, can go to samsung store do not know can use this bug to unlock my mobile?

hovanhuang said:
OK. So after you sign in Samsung account then what happened?
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
I use this method https://www.youtube.com/watch?v=IcObVaHboqc
When I adding account on Samsung account, it does not pop up the option of create account.
What else can I do?

tkp206093 said:
I found can double-click the home button to go to the camera, select the shooting mode, the option to download more, can go to samsung store do not know can use this bug to unlock my mobile?
Click to expand...
Click to collapse
That's great if you can access download. Can you access website? Should be an app to bypass that just like the google lock.
Sent from my SAMSUNG-SM-G890A using Tapatalk

hovanhuang said:
That's great if you can access download. Can you access website? Should be an app to bypass that just like the google lock.
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
Can

tkp206093 said:
I use this method https://www.youtube.com/watch?v=IcObVaHboqc
When I adding account on Samsung account, it does not pop up the option of create account.
What else can I do?
Click to expand...
Click to collapse
Try the input language method. there's someone access website by go to setting of your input method then service term something like that.
Sent from my SAMSUNG-SM-G890A using Tapatalk
---------- Post added at 10:23 AM ---------- Previous post was at 10:18 AM ----------
tkp206093 said:
I use this method https://www.youtube.com/watch?v=IcObVaHboqc
When I adding account on Samsung account, it does not pop up the option of create account.
What else can I do?
Click to expand...
Click to collapse
I am wondering did you reset to factory Before You apply all the root steps? Because all those Samsung and google lock only comes when no factory reset but direct wipe from recovery. That's how they prevent theft activities. Can you call Samsung?
Sent from my SAMSUNG-SM-G890A using Tapatalk

hovanhuang said:
Try the input language method. there's someone access website by go to setting of your input method then service term something like that.
Sent from my SAMSUNG-SM-G890A using Tapatalk
---------- Post added at 10:23 AM ---------- Previous post was at 10:18 AM ----------
I am wondering did you reset to factory Before You apply all the root steps? Because all those Samsung and google lock only comes when no factory reset but direct wipe from recovery. That's how they prevent theft activities. Can you call Samsung?
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
If I did not reset to factory befort root sep. I can call Samsung

hovanhuang said:
Try the input language method. there's someone access website by go to setting of your input method then service term something like that.
Sent from my SAMSUNG-SM-G890A using Tapatalk
---------- Post added at 10:23 AM ---------- Previous post was at 10:18 AM ----------
I am wondering did you reset to factory Before You apply all the root steps? Because all those Samsung and google lock only comes when no factory reset but direct wipe from recovery. That's how they prevent theft activities. Can you call Samsung?
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
Do you have any video or picture which can help me to understand more about the input language method?
Thank you for you helping

would something like this work?
https://www.youtube.com/watch?v=JZPLvPhXpxo

Hey guys,
I've updated my tutorial on "How to update your S6 Active" to cover the 6.0.1 Marshmallow update. If you don't how to do it by yourself check it out here:
http://forum.xda-developers.com/galaxy-s6/galaxy-s6-active/downloading-flashing-att-galaxy-s6-t3260744

hovanhuang said:
Try the input language method. there's someone access website by go to setting of your input method then service term something like that.
Sent from my SAMSUNG-SM-G890A using Tapatalk
---------- Post added at 10:23 AM ---------- Previous post was at 10:18 AM ----------
I am wondering did you reset to factory Before You apply all the root steps? Because all those Samsung and google lock only comes when no factory reset but direct wipe from recovery. That's how they prevent theft activities. Can you call Samsung?
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
I can walk setting, but I can not add the Samsung Account

lirex said:
Hey guys,
I've updated my tutorial on "How to update your S6 Active" to cover the 6.0.1 Marshmallow update. If you don't how to do it by yourself check it out here:
http://forum.xda-developers.com/gal...e/downloading-flashing-att-galaxy-s6-t3260744
Click to expand...
Click to collapse
Which option do not need to full wipe? I hate reinstall everything and reset.
Sent from my SAMSUNG-SM-G890A using Tapatalk

hovanhuang said:
Which option do not need to full wipe? I hate reinstall everything and reset.
Sent from my SAMSUNG-SM-G890A using Tapatalk
Click to expand...
Click to collapse
At the moment you can't go to 6.0.1 without a full wipe. However using the official Samsung program Smart Switch you can make a full backup on your PC (contacts, calls, messages, programs, settings, pictures) and then restore it once you're on Marshmallow

I need help unlock Reactivation Lock:crying:

tkp206093 said:
I need help unlock Reactivation Lock:crying:
Click to expand...
Click to collapse
Go to Settings > Security > Reactivation Lock and then uncheck the Turn Reactivation lock on. This is only needed if you already turned-it-ON, from which you cannot modify the system when it’s turned-ON.
You may be asked to log into your Samsung account in order to disable the Reactivation Lock.