Related
No credits for me, i only want to purpose an interesting thread to speed up your GPS fix!
http://forum.xda-developers.com/showthread.php?t=1060963
Really awesome!
Try yourself!
call me retarded if need be but i didnt understand much of what he said, do you think you could explain what you did for me, any help is greatly appreciated, as i havent been able to use my gps in a long time.
You have do edit this file, use Root Explorer to copy it without using adb.
/etc/gps.conf
Delete all content and put this:
Code:
NTP_SERVER=0.fr.pool.ntp.org
NTP_SERVER=1.fr.pool.ntp.org
NTP_SERVER=2.fr.pool.ntp.org
NTP_SERVER=3.fr.pool.ntp.org
XTRA_SERVER_1=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
DEBUG_LEVEL =0
# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0
# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
ACCURACY_THRES=0
# Report supl ref location as position, 1=enable, 0=disable
REPORT_POSITION_USE_SUPL_REFLOC=1
# Wiper (wifi positioning), 1=enable, 0=disable
ENABLE_WIPER=1
################################
##### AGPS server settings #####
################################
# FOR SUPL SUPPORT, set the following
SUPL_HOST=supl.google.com
SUPL_PORT=7276
SUPL_NO_SECURE_PORT=7276
SUPL_SECURE_PORT=7276
# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234
#################################
##### AGPS Carrier settings #####
#################################
CURRENT_CARRIER=common
DEFAULT_AGPS_ENABLE=TRUE
DEFAULT_SSL_ENABLE=FALSE
# TRUE for "User Plane", FALSE for "Control Plane"
DEFAULT_USER_PLANE=TRUE
Open this site(http://www.pool.ntp.org/en/) and choose your favourites NTP servers from the right menu (Active servers), which have to be replaced in these strings.
For example I am Italian, in the site i have finded these servers:
Code:
server 0.it.pool.ntp.org
server 1.it.pool.ntp.org
server 2.it.pool.ntp.org
server 3.it.pool.ntp.org
Now in my gps.conf I have to replace first four lines with:
Code:
NTP_SERVER=0.it.pool.ntp.org
NTP_SERVER=1.it.pool.ntp.org
NTP_SERVER=2.it.pool.ntp.org
NTP_SERVER=3.it.pool.ntp.org
Save your file, delete original /etc/gps.conf and place your new gps.conf.
NOTE: Be sure to assign at the new file the same permissions of the old. Using root explorer for this, long-press to the file -> permissions.
Sorry for my bad english!
worked amazingly well, gps lock immediate, normally it only seemed to be a maybe thing. and every program is now accurate, for some reason only google navigation could read properly when it worked. thank you very much, and your english was very easy to understand.
Works amazingly, locked on in 10 second.
fede91it said:
You have do edit this file, use Root Explorer to copy it without using adb.
/etc/gps.conf
Delete all content and put this:
Code:
NTP_SERVER=0.fr.pool.ntp.org
NTP_SERVER=1.fr.pool.ntp.org
NTP_SERVER=2.fr.pool.ntp.org
NTP_SERVER=3.fr.pool.ntp.org
XTRA_SERVER_1=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
DEBUG_LEVEL =0
# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0
# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
ACCURACY_THRES=0
# Report supl ref location as position, 1=enable, 0=disable
REPORT_POSITION_USE_SUPL_REFLOC=1
# Wiper (wifi positioning), 1=enable, 0=disable
ENABLE_WIPER=1
################################
##### AGPS server settings #####
################################
# FOR SUPL SUPPORT, set the following
SUPL_HOST=supl.google.com
SUPL_PORT=7276
SUPL_NO_SECURE_PORT=7276
SUPL_SECURE_PORT=7276
# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234
#################################
##### AGPS Carrier settings #####
#################################
CURRENT_CARRIER=common
DEFAULT_AGPS_ENABLE=TRUE
DEFAULT_SSL_ENABLE=FALSE
# TRUE for "User Plane", FALSE for "Control Plane"
DEFAULT_USER_PLANE=TRUE
Open this site(http://www.pool.ntp.org/en/) and choose your favourites NTP servers from the right menu (Active servers), which have to be replaced in these strings.
For example I am Italian, in the site i have finded these servers:
Code:
server 0.it.pool.ntp.org
server 1.it.pool.ntp.org
server 2.it.pool.ntp.org
server 3.it.pool.ntp.org
Now in my gps.conf I have to replace first four lines with:
Code:
NTP_SERVER=0.it.pool.ntp.org
NTP_SERVER=1.it.pool.ntp.org
NTP_SERVER=2.it.pool.ntp.org
NTP_SERVER=3.it.pool.ntp.org
Save your file, delete original /etc/gps.conf and place your new gps.conf.
NOTE: Be sure to assign at the new file the same permissions of the old. Using root explorer for this, long-press to the file -> permissions.
Sorry for my bad english!
Click to expand...
Click to collapse
Great tweak ! by the way, i use FasterFix and i write "2.be.pool.ntp.org" in the field and the effect seems the same one, .. but you made me discover NTP servers and I thank you!
Sky
alain.duchateau said:
Great tweak ! by the way, i use FasterFix and i write "2.be.pool.ntp.org" in the field and the effect seems the same one, .. but you made me discover NTP servers and I thank you!
Sky
Click to expand...
Click to collapse
With FasterFix you only change NTP server, you don't add all extra specifications and AGPS directives.
flashed the zip from the original post in the Nexus S thread and it works like a charm. faster en better fix then ever. Seems a lot easier than all the editing. Or am I missing something?
If you don't want to change FR servers you haven't to do other. I have changed them to IT servers, for this reason i haven't used flash zip but manual method.
can someone create a zip file for United States? I've used root explorer but it doesn't seem to change to US.. Oh, one more question, the zip file can be installed using rom manager?
Thanks in advance.
Oh, this thread is so full of wrongness it would easily win the world championship of fudge.
Of all the parameters mentioned here additionally to the NTP and EXTRA server settings only
Code:
gps_conf.INTERMEDIATE_POS = 0;
gps_conf.ACCURACY_THRES = 0;
gps_conf.ENABLE_WIPER = 0;
gps_conf.DEBUG_LEVEL = 4;
are actually implemented.
ENABLE_WIPER doesn't even have any effect at all (it's never checked anywhere). WiFi position reporting can be enabled in the system settings.
Please share your corrected gps.conf
fede91it said:
Please share your corrected gps.conf
Click to expand...
Click to collapse
for Belgium, here is my gps.conf :
NTP_SERVER=0.be.pool.ntp.org
NTP_SERVER=1.be.pool.ntp.org
NTP_SERVER=1.fr.pool.ntp.org
XTRA_SERVER_1=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
DEBUG_LEVEL =0
# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0
# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
ACCURACY_THRES=0
# Report supl ref location as position, 1=enable, 0=disable
REPORT_POSITION_USE_SUPL_REFLOC=1
# Wiper (wifi positioning), 1=enable, 0=disable
ENABLE_WIPER=1
################################
##### AGPS server settings #####
################################
# FOR SUPL SUPPORT, set the following
SUPL_HOST=supl.google.com
SUPL_PORT=7276
SUPL_NO_SECURE_PORT=7276
SUPL_SECURE_PORT=7276
# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234
#################################
##### AGPS Carrier settings #####
#################################
CURRENT_CARRIER=common
DEFAULT_AGPS_ENABLE=TRUE
DEFAULT_SSL_ENABLE=FALSE
# TRUE for "User Plane", FALSE for "Control Plane"
DEFAULT_USER_PLANE=TRUE
I hope this can help you
With the updated gps.conf, i get fixed in 10 secs
hi, i am looking for a dump of the build.prop for the droid bionic.
i am wanting to do a little experimenting with my nook Tab with app compatibility.
if a kind soul would post a dump of there build.prop i would greatly appreciate it.
The build.prop file is I believe a simple text file, please folks a simple copy and paste of your build.prop
would be quite helpful.
Here you go!
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=5.5.1_84_DBN-55
ro.build.display.id=5.5.1_84_DBN-55
ro.build.version.incremental=110814
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.4
ro.build.date=Sun Aug 14 23:56:58 CDT 2011
ro.build.date.utc=1313384218
ro.build.type=user
ro.build.user=hpn683
ro.build.host=il93lnxdroid29
ro.build.tags=release-keys
ro.product.model=DROID BIONIC
ro.product.brand=verizon
ro.product.name=targa_vzw
ro.product.device=cdma_targa
ro.product.board=targa
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=omap4
# ro.build.product is obsolete; use ro.product.device
ro.build.product=targa_vzw
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=cdma_targa-user 2.3.4 5.5.1_84_DBN-55 110814 release-keys
ro.build.fingerprint=verizon/targa_vzw/cdma_targa:2.3.4/5.5.1_84_DBN-55/110814:user/release-keys
# end build properties
#
# system.prop for CDMA Droidwe
#
# rild.libpath=/system/lib/libril-moto-umts-1.so
rild.libpath=/system/lib/libmoto_ril.so
rild.libargs=-d /dev/ttyO0
ro.sf.lcd_density=240
ro.default_usb_mode=2
ro.mot.ril.danlist=611,*611,#611
persist.ril.ecclist=911,*911,#911
persist.ril.modem.mode =1
# This defines the max event window manager can
# handle in 1 s. We may adjust this # for performance
# reason later
windowsmgr.max_events_per_sec=70
# USB modes allowed for UI and switching
ro.ngp_available=1
ro.modem_available=0
# Default network type.
# 4 => CDMA/EVDO. To be used until Targa has LTE SFN
# 7 => GLOBAL.
ro.telephony.default_network=7
ro.com.google.clientid=android-motorola
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.cdma.home.operator.numeric=310004
ro.cdma.home.operator.alpha=Verizon
ro.config.vc_call_vol_steps=7
# wlan interface
wifi.interface = tiwlan0
softap.interface = tiap0
# Time between scans in seconds. Keep it high to minimize battery drain.
# This only affects the case in which there are remembered access points,
# but none are in range.
wifi.supplicant_scan_interval = 45
# Indicate carrier OTA SP number schema
# refer to frameworks/base/telephony/java/com/android/
# internal/telephony/cdma/CDMAPhone.java for the schema:
ro.cdma.otaspnumschema=SELC,1,80,99
# write cdma MIN to property for VVM use in GSM/UMTS mode
persist.radio.cdma.min = 0
# true Horizontal VVM is preloaded, not allow to install standalone version of
# VVM from Android Market
# false Horizontal VVM is not preloaded
ro.HorizontalVVM=true
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version = 131072
# This is a high density device with more memory, so larger vm heaps for it.
dalvik.vm.heapsize=32m
# our HTML browser (not WAP browser ) does not need to specify UAProf URL
ro.mot.hw.uaprof=http://uaprof.vtext.com/mot/xt875/xt875.xml
# Enable HAC to also display Call Setting Menu Option.
ro.mot.hw.HAC=1
# Motorola, a19622, 12/28/2009, IKSHADOW-204 / Location Settings for android
# Property to set enabling state of the location privacy setting feature.
# Motorola, a19622, 03/16/2010, IKSHADOW-2141 / Disable feature 33067
#ro.mot.settings.locprivacy=1
# ERI feature
# 0 OFF
# 1 ON
ro.mot.eri=1
# Motorol,a6889c,02/Feb/2010,IKSHADOW-619
# Proximity Sensor feature
# 0 disable
# 1 enable
persist.mot.proximity.touch=1
# End IKSHADOW-619
# BEGIN Motorola, a22976, 25-Feb-2010, IKSHADOW-702, FID 31841
# VZW Requirement Specifications: NETWORK BASED PLUS CODE DIALING
# 0 disable
# 1 enable
ro.cdma.nbpcd=1
# END IKSHADOW-702
# BEGIN Motorola, a22976, 12-Mar-2010, IKSHADOW-1784, Power Up Tone
# Motorola, a22976, 12-Apr-2010, IKSHADOW-3298, Remove temporary power up tone
# persist.mot.powerup.tone=/system/media/bootup.ogg
# END IKSHADOW-1784
persist.mot.usb.mediasync = 1
# persist.usb.android_config = 1
# System property for SMC
ro.service.start.smc=1
ro.HorizontalBUA=true
#Proximity sensor debounce time
mot.proximity.delay=450
# disable touch below 60 pixels
mot.proximity.distance=60
#inphone calibration backup support
ro.mot.hw.calibratedImager=1
# BEGIN Motorola, qpmc46, 05-Jul-2010, IKMAIN-311
persist.ril.mux.noofchannels = 8
# END Motorola, qpmc46, 05-Jul-2010, IKMAIN-311
#BEGIN Motorola, nfjb73, 21-jun-2010,
# this is for feature 34386, other features for vzw global phone
# could use this property too. IKMAIN-732
#1 this is verizon wireless globle phone
#0 this is not verizon wireless globle phone
ro.mot.phonemode.vzwglobalphone=0
# END Motorola, nfjb73, 21-jun-2010, IKMAIN-732
# BEGIN Motorola, nfjb73 23-jun-2010, IKMAIN-624
# this is for feature 33860, when phone is activated, the cdma mdn is written.
persist.radio.vzw.cdma.mdn=
# END Motorola, nfjb73
# BEGIN Motorola, qmfd78, 14-Jul-2010, IKMAIN-884
# GSM SMS traffic needs to be routed/sent through North America SMSC.
# This is part of the VZW World-phone Feature. SMS are always sent to a US SMSC and then injected
# into that network. This allows for billing and give the user the impression that the device is
# still in the US.
ro.telephony.gsm-routes-us-smsc = 1
# END Motorola, qmfd78, 14-Jul-2010, IKMAIN-884
# BEGIN Motorola, a22600 qmfd78, 16-Jul-2010, IKDROIDPRO-423
# For north american cdma operators, this flag should be 1.
# It enables number mangling when nbpcd (plus code dialing) is not supported.
# This is part of the VZW World-phone Feature.
ro.cdma.home.operator.isnan=1
# END Motorola, a22600 qmfd78, 16-Jul-2010, IKDROIDPRO-423
# EDM feature - IKDROIDPRO-381 - Start
ro.mot.dpmext = true
# EDM feature - IKDROIDPRO-381 -End
# BEGIN Moto,IKDROIDPRO-430, a17673
# Feature33857 on DroidWE, support DualMode switch, UMTS/CDMA
##### Override in cdma_targa.mk until LTE + Global support. ######
#ro.mot.FTR.33857=true
# END IKDROIDPRO-430
# This is necessary for framework to support
# the LTE and eHRPD capability.
##### Override in cdma_targa.mk until LTE + Global support. ######
#ro.mot.lte_on_cdma=1
# BEGIN Moto, IKSTABLETWO-1284, nfjb73
# without this property, the lock screen would take global phone as UMTS
# block user to operate before setup
keyguard.no_require_sim = true
# End Moto
# BEGIN Moto, IKSTABLETWO-689, nfjb73, for 34387,33857
# when phone in Global mode, FW need to know the last phone mode beore power off
# when phone power up, it would use the right mode to avoid switch
persist.radio.ap.phonetype=2
# END IKSTABLETWO-689
# Multimode RIL Paths
##### Override in cdma_targa.mk until LTE + Global support. ######
#lte_ril.libpath=/system/lib/lib-mot-lte-ril.so
#cdma_ril.libpath=/system/lib/libmoto_ril.so
#ril.rat=LTE
# Motorola, IKHALFMWK-3, w001091
# Feature 32711, deep sleep mode support
ro.mot.deep.sleep.supported=true
# BEGIN Motorola, A24124, 10-June-2011, IKTARGA-1744
ro.mot.bindervm.config = 251
# END IKTARGA-1744
#BEGIN Motorola, w30471, 16-Mar-2011, IKSTABLEFIVE-1796 35691 - Set configurable parameters for Verizon products
mot.mms.con.timeout = 30000
mot.mms.socket.timeout = 120000
mot.mms.tr.vc.timeout = 55000
mot.mms.trm.timeout = 240000
mot.mms.abort.prog.lim = 90
mot.mms.retry.pic.size = 512000
mot.mms.retry.default = false
mot.mms.retry.timeout.1 = 30000
mot.mms.retry.timeout.2 = 180000
mot.mms.retry.timeout.3 = 300000
mot.mms.retry.timeout.4 = 480000
# END IKSTABLEFIVE-1796
# Give extra time for LTE bug dumps
ril.dumpstate.timeout=60
#Enable hdcp support
ro.hdcp.support=2
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.ms=android-verizon
ro.com.google.clientidbase.am=android-verizon
ro.com.google.clientidbase.gmm=android-motorola
ro.com.google.clientidbase.yt=android-verizon
ro.kernel.android.ril=yes
persist.ril.mux.noofchannels=10
persist.ril.mux.ttydevice=/dev/ttyO0
persist.ril.modem.ttydevice=/dev/ttyUSB4
persist.ril.tcmd.ttydevice=/dev/usb/tty2-1:1.3
persist.ril.features=0x90A
persist.ril.mux.retries=500
persist.ril.mux.sleep=2
rild.libpath=/system/lib/moto-ril-multimode.so
ro.config.ringtone=DROID_Chime.ogg
ro.config.notification_sound=Droid.ogg
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.default_usb_mode=0
ro.media.enc.aud.fileformat=qcp
ro.media.enc.aud.codec=qcelp
ro.media.enc.aud.bps=13300
ro.media.enc.aud.ch=1
ro.media.enc.aud.hz=8000
ro.com.google.gmsversion=2.3_r6
ro.mot.phonemode.vzw4gphone=1
ro.mot.lte_on_cdma=1
lte_ril.libpath=/system/lib/lib-mot-lte-ril.so
cdma_ril.libpath=/system/lib/libmoto_ril.so
ril.rat=LTE
lte_ril.netcfg_to=90
ro.mot.tmp.telephony.refactor=true
ro.cdma.subscription=0
ro.telephony.call_ring.multiple=false
ro.telephony.call_ring.delay=3000
ro.setupwizard.enable_bypass=1
ro.cdma.homesystem=64,65,76,77,78,79,80,81,82,83
ro.cdma.data_retry_config=default_randomization=2000,max_retries=infinite,0,0,120000,180000,540000,960000
ro.gsm.data_retry_config=default_randomization=2000,max_retries=infinite,0,0,80000,125000,485000,905000
ro.gsm.2nd_data_retry_config=max_retries=1,15000
ro.media.camcorder.1080p=mp4,h264,30,15000000,aac,128000,44100,2
ro.media.camcorder.720p=mp4,h264,30,10000000,aac,128000,44100,2
ro.media.camcorder.d1NTSC=mp4,h264,30,6000000,aac,128000,44100,2
ro.media.camcorder.vga=mp4,h264,30,4000000,aac,128000,44100,2
ro.media.camcorder.cif=mp4,h264,30,1500000,aac,128000,44100,2
ro.media.camcorder.qvga=mp4,h264,15,500000,aac,64000,44100,2
ro.media.camcorder.mms=3gp,h264,15,128000,amrnb,12200,8000,1
ro.media.camcorder.mmsres=qvga
ro.camcorder.zoom=true
ro.media.capture.maxres=8m
ro.media.capture.fast.fps=4
ro.media.capture.slow.fps=120
ro.media.capture.flash=led
ro.media.capture.flashMinV=3300000
ro.media.capture.torchIntensity=40
ro.media.capture.flashIntensity=70
ro.media.panorama.defres=3264x1840
ro.media.panorama.frameres=1280x720
ro.camcorder.videoModes=false
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-record=false
ro.media.camera.focal=3451.0,3451.0
ro.media.camera.principal=1632.0,1224.0
ro.media.camera.skew=0.0
ro.media.camera.distortion=0.0,0.0,0.0,0.0,0.0
ro.media.camera.calresolution=3264,2448
ro.mot.setuptype=2
ro.HorizontalBUA=true
ro.HorizontalVVM=true
ro.horizontalIM=true
ro.horizontalNGM=false
ro.horizontalVMM=false
ro.horizontalMOD=false
ro.horizontalVOD=false
ro.horizontalEmail=false
ro.mot.internalsdcard=1
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.mot.dpmext=true
ro.com.google.clientid=android-motorola
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.mot.hw.uaprof=http://uaprof.motorola.com/phoneconfig/MotoMB200/profile/MotoMB200.rdf
ro.build.version.full=Blur_Version.5.5.886.XT875.Verizon.en.US
ro.mot.hidden_keyboards=evfwd
Sent from my DROID BIONIC using Tapatalk
Remember to hit the "Thanks" button when someone helps you!
Thank you. I appreciate this !!
Since I keep seeing this problem raised in all the development threads I've decided to add this information here.
I hope this will help others too. I had no problem with GPS on any Custom ROM like CM, Carbon, OMNI or AOKP after following the instructions below.
87Fra87 said:
What i can do to resolve the problem of GPS?
Click to expand...
Click to collapse
First thing is first: TIME is ESSENTIAL for GPS, and here is why:
Essentially, the GPS receiver compares the time a signal was transmitted by a satellite with the time it was received. The time difference tells the GPS receiver how far away the satellite is. Now, with distance measurements from a few more satellites, the receiver can determine the user's position and display it on the unit's electronic map.
Click to expand...
Click to collapse
In order for you to get the correct time you will need to edit the GPS.conf file and add the NTP servers for your geography (country and continent).
Find your NTP server here:
http://www.pool.ntp.org/en/
Preferably use a GPS.conf file from your stock XV Rom as template (I've added one below)
NTP_SERVER=time.gpsonextra.net
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra2.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra2.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra2.bin
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
DEBUG_LEVEL = 3
# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0
# supl version 1.0
SUPL_VER=0x10000
# Error Estimate
# _SET = 1
# _CLEAR = 0
ERR_ESTIMATE=0
# GPS Capabilities bit mask
# SCHEDULING = 1
# MSB = 2
# MSA = 4
# ULP = 0x20
# default = MSA | MSB | SCHEDULING | ULP
CAPABILITIES=0x3
# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
# ACCURACY_THRES=5000
################################
##### AGPS server settings #####
################################
# FOR SUPL SUPPORT, set the following
SUPL_HOST=supl.sonyericsson.com
SUPL_PORT=7275
# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234
################################
# Sensor Settings
################################
# Needs to be set explicitly based on sensor
# There is no default value.
#GYRO_BIAS_RANDOM_WALK=
# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
SENSOR_ACCEL_BATCHES_PER_SEC=2
SENSOR_ACCEL_SAMPLES_PER_BATCH=5
SENSOR_GYRO_BATCHES_PER_SEC=2
SENSOR_GYRO_SAMPLES_PER_BATCH=5
# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
# Sensor Control Mode (0=AUTO, 1=FORCE_ON)
SENSOR_CONTROL_MODE=0
# Enable or Disable Sensors for GPS use (0=Enable, 1=Disable)
SENSOR_USAGE=1
# Choose GSIFF sensor provider (1=DSPS, 2=Android NDK)
SENSOR_PROVIDER=1
################################
# Indoor Positioning Settings
################################
# 0: QUIPC disabled, 1: QUIPC enabled, 2: forced QUIPC only
QUIPC_ENABLED = 0
################################
# EXTRA SETTINGS
################################
# Enable or Disable Wiper (1=Enable, 0=Disable)
ENABLE_WIPER=0
####################################
# LTE Positioning Profile Settings
####################################
# 0: Enable RRLP on LTE(Default)
# 1: Enable LPP_User_Plane on LTE
# 2: Enable LPP_Control_Plane
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
LPP_PROFILE = 0
Click to expand...
Click to collapse
Supplementary, look on the internet and see how is the Glonass satellite coverage in your area - if it's problematic, this may impede getting a fast first fix.
GLONASS coverage:
http://glonass-iac.ru/en/
After implementing the change use a good navigation application to get the FIRST fix - I prefer Sygic.
There is a big difference - I get a MUCH faster fix with Sygic than with other applications such as (but not limited to) GPS Status&Toolbox.
Afterwards, your TTFF (time to first fix) will drastically improve, even in other apps, such as Ingress.
!!! > Not properly tested yet:
Differential Global Positioning System (DGPS) is an enhancement to Global Positioning System that provides improved location accuracy, from the 15-meter nominal GPS accuracy to about 10 cm in case of the best implementations.
DGPS uses a network of fixed, ground-based reference stations to broadcast the difference between the positions indicated by the satellite systems and the known fixed positions. These stations broadcast the difference between the measured satellite pseudoranges and actual (internally computed) pseudoranges, and receiver stations may correct their pseudoranges by the same amount. The digital correction signal is typically broadcast locally over ground-based transmitters of shorter range.
The term refers to a general technique of augmentation
You should be able to use DGPS corrections in Europe via custom application for SISnet receiving correction signals from EGNOS augmentation satellites.
The Android app is available under the link below:
http://egnos-portal.gsa.europa.eu/news/egnos-gets-invite-your-smartphone-11
Sent from my Xperia V using Tapatalk
i found out how to speed it up, the problem is the wrong gps settings in conf file
im in the uk, change the 4 #uk server ones to your countries settings, a quick google will find them
go to
system/etc/gps.conf
this is the contents of my conf file
#Uncommenting these urls would only enable
#the power up auto injection and force injection(test case).
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra2.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra2.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra2.bin
# Error Estimate
# _SET = 1
# _CLEAR = 0
ERR_ESTIMATE=0
#Test
NTP_SERVER=time.gpsonextra.net
#Asia
# NTP_SERVER=asia.pool.ntp.org
#Europe
# NTP_SERVER=europe.pool.ntp.org
#North America
# NTP_SERVER=north-america.pool.ntp.org
#uk server
# NTP_SERVER=0.uk.pool.ntp.org
1.uk.pool.ntp.org
2.uk.pool.ntp.org
3.uk.pool.ntp.org
# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
# 4 - Debug, 5 - Verbose
# If DEBUG_LEVEL is commented, Android's logging levels will be used
DEBUG_LEVEL = 4
# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=0
# supl version 1.0
SUPL_VER=0x10000
# GPS Capabilities bit mask
# SCHEDULING = 0x01
# MSB = 0x02
# MSA = 0x04
# ON_DEMAND_TIME = 0x10
# GEOFENCE = 0x20
# default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
CAPABILITIES=0x37
# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
# ACCURACY_THRES=5000
################################
##### AGPS server settings #####
################################
# FOR SUPL SUPPORT, set the following
# SUPL_HOST=supl.host.com or IP
# SUPL_PORT=1234
# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234
####################################
# LTE Positioning Profile Settings
####################################
# 0: Enable RRLP on LTE(Default)
# 1: Enable LPP_User_Plane on LTE
# 2: Enable LPP_Control_Plane
# 3: Enable both LPP_User_Plane and LPP_Control_Plane
LPP_PROFILE = 0 # Sensor R&D : This will not be injected to MODEM
################################
# EXTRA SETTINGS
################################
# NMEA provider (1=Modem Processor, 0=Application Processor)
NMEA_PROVIDER=1
##################################################
# Select Positioning Protocol on A-GLONASS system
##################################################
# 0x1: RRC CPlane
# 0x2: RRLP UPlane
# 0x4: LLP Uplane
A_GLONASS_POS_PROTOCOL_SELECT = 0x0
##################################################
# Delete only Ephemeris files
##################################################
#0 : off - default
#1 : on - Erase only eph files when we use 'delete aiding data' function.
DEL_EPH_ONLY = 0
My gps works pretty fast...well we can't fix what isn't broken.
Sent from my SM-G900F using XDA Free mobile app
trettet said:
My gps works pretty fast...well we can't fix what isn't broken.
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Same here, GPS is really fast.
But thanks for posting.
Best regards
Franck
trettet said:
My gps works pretty fast...well we can't fix what isn't broken.
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
you do realise not everyone is selfcentered on here.
because the majority of rom developers come from say the us the settings for them dont always work that well in other countries.
the gps-conf is an example of just one of these things, the gps works by locking onto multiple gps sources.
not everyone on here is a septic ignorant of the outside world
Thanks @shanky887614
Did you happen to take average fix times before and after your update to see just how much of an improvement it made?
Diskb0x said:
Thanks @shanky887614
Did you happen to take average fix times before and after your update to see just how much of an improvement it made?
Click to expand...
Click to collapse
it went from a couple mins to fix to a couple seconds.
this is why internet on, it is much quicker.
if you want some help to do this ill try.
Hi,
it's not exactly clear to me what has to be changed.
Do you recommend to change the NTP_SERVER line? Because your NTP_SERVER lines after "#uk server" are commented out, so it's normally not used.
Regards,
meiser
Wifi range is terrible and keeps disconnecting me, what's the best way to edit these settings?
Code:
# This file allows user to override the factory
# defaults for the WLAN Driver
# Enable IMPS or not
gEnableImps=1
# Enable/Disable Idle Scan
gEnableIdleScan=0
# Increase sleep duration (seconds) during IMPS
# 0 implies no periodic wake up from IMPS. Periodic wakeup is
# unnecessary if Idle Scan is disabled.
gImpsModSleepTime=0
# Enable BMPS or not
gEnableBmps=0
# Enable suspend or not
# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter
gEnableSuspend=3
# Phy Mode (auto, b, g, n, etc)
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
gDot11Mode=0
# Handoff Enable(1) Disable(0)
gEnableHandoff=0
# CSR Roaming Enable(1) Disable(0)
gRoamingTime=0
# Assigned MAC Addresses - This will be used until NV items are in place
# Each byte of MAC address is represented in Hex format as XX
Intf0MacAddress=000AF58989FF
Intf1MacAddress=000AF58989FE
Intf2MacAddress=000AF58989FD
Intf3MacAddress=000AF58989FC
# UAPSD service interval for VO,VI, BE, BK traffic
InfraUapsdVoSrvIntv=0
InfraUapsdViSrvIntv=0
InfraUapsdBeSrvIntv=0
InfraUapsdBkSrvIntv=0
# Make 1x1 the default antenna configuration
gNumRxAnt=1
# Beacon filtering frequency (unit in beacon intervals)
gNthBeaconFilter=50
# Enable WAPI or not
# WAPIIsEnabled=0
# Flags to filter Mcast abd Bcast RX packets.
# Value 0: No filtering, 1: Filter all Multicast.
# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
McastBcastFilter=3
#Flag to enable HostARPOffload feature or not
hostArpOffload=1
#SoftAP Related Parameters
# AP MAc addr
gAPMacAddr=000AF589dcab
# 802.11n Protection flag
gEnableApProt=1
#Enable OBSS protection
gEnableApOBSSProt=1
#Enable TrafficMonitor
gEnableTrafficMonitor=1
#Set TracfficIdleTimeout
gTrafficIdleTimeout=3000
#Enable/Disable UAPSD for SoftAP
gEnableApUapsd=0
# Fixed Rate
gFixedRate=0
# Maximum Tx power
# gTxPowerCap=100
# Fragmentation Threshold
# gFragmentationThreshold=2346
# RTS threshold
RTSThreshold=2347
# Intra-BSS forward
gDisableIntraBssFwd=0
# WMM Enable/Disable
WmmIsEnabled=0
# 802.11d support
g11dSupportEnabled=1
# 802.11h support
g11hSupportEnabled=1
# CCX Support and fast transition
CcxEnabled=0
FastTransitionEnabled=1
ImplicitQosIsEnabled=1
gNeighborScanTimerPeriod=200
gNeighborLookupThreshold=76
gNeighborReassocThreshold=81
gNeighborScanChannelMinTime=20
gNeighborScanChannelMaxTime=30
gMaxNeighborReqTries=3
# Legacy (non-CCX, non-802.11r) Fast Roaming Support
# To enable, set FastRoamEnabled=1
# To disable, set FastRoamEnabled=0
FastRoamEnabled=1
#Check if the AP to which we are roaming is better than current AP in terms of RSSI.
#Checking is disabled if set to Zero.Otherwise it will use this value as to how better
#the RSSI of the new/roamable AP should be for roaming
RoamRssiDiff=3
# If the RSSI of any available candidate is better than currently associated
# AP by at least gImmediateRoamRssiDiff, then being to roam immediately (without
# registering for reassoc threshold).
# NOTE: Value of 0 means that we would register for reassoc threshold.
gImmediateRoamRssiDiff=10
# To enable, set gRoamIntraBand=1 (Roaming within band)
# To disable, set gRoamIntraBand=0 (Roaming across band)
gRoamIntraBand=0
# SAP Country code
# Default Country Code is 2 bytes, 3rd byte is optional indoor or out door.
# Example
# US Indoor, USI
# Korea Outdoor, KRO
# Japan without optional byte, JP
# France without optional byte, FR
#gAPCntryCode=USI
#Short Guard Interval Enable/disable
gShortGI20Mhz=1
gShortGI40Mhz=1
#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled
gAPAutoShutOff=0
# SAP auto channel selection configuration
# 0 = disable auto channel selection
# 1 = enable auto channel selection, channel provided by supplicant will be ignored
gApAutoChannelSelection=1
# Listen Energy Detect Mode Configuration
# Valid values 0-128
# 128 means disable Energy Detect feature
# 0-9 are threshold code and 7 is recommended value from system if feature is to be enabled.
# 10-128 are reserved.
# The EDET threshold mapping is as follows in 3dB step:
# 0 = -60 dBm
# 1 = -63 dBm
# 2 = -66 dBm
# ...
# 7 = -81 dBm
# 8 = -84 dBm
# 9 = -87 dBm
# Note: Any of these settings are valid. Setting 0 would yield the highest power saving (in a noisy environment) at the cost of more range. The range impact is approximately #calculated as:
#
# Range Loss (dB) = EDET threshold level (dBm) + 127 dBm.
#
gEnablePhyAgcListenMode=128
#Preferred channel to start BT AMP AP mode (0 means, any channel)
BtAmpPreferredChannel=0
#Preferred band (both or 2.4 only or 5 only)
BandCapability=0
#Beacon Early Termination (1 = enable the BET feature, 0 = disable)
enableBeaconEarlyTermination=0
beaconEarlyTerminationWakeInterval=3
#Bluetooth Alternate Mac Phy (1 = enable the BT AMP feature, 0 = disable)
gEnableBtAmp=0
#SOFTAP Channel Range selection
gAPChannelSelectStartChannel=1
gAPChannelSelectEndChannel=11
#SOFTAP Channel Range selection Operating band
# 0:2.4GHZ 1: LOW-5GHZ 2:MID-5GHZ 3:HIGH-5GHZ 4: 4.9HZ BAND
gAPChannelSelectOperatingBand=0
#Channel Bonding
gChannelBondingMode5GHz=1
#Enable Keep alive with non-zero period value
#gStaKeepAlivePeriod = 30
#AP LINK MONITOR TIMEOUT is used for both SAP and GO mode.
#It is used to change the frequency of keep alive packets in the AP Link Monitor period which is by
#default 20s. Currently the keep alive packets are sent as an interval of 3s but after this change
#the keep alive packet frequency can be changed.
#gApLinkMonitorPeriod = 3
#If set will start with active scan after driver load, otherwise will start with
#passive scan to find out the domain
gEnableBypass11d=1
#If set to 0, will not scan DFS channels
gEnableDFSChnlScan=1
gVhtChannelWidth=2
gEnableLogp=1
# Enable Automatic Tx Power control
gEnableAutomaticTxPowerControl=1
# 0 for OLPC 1 for CLPC and SCPC
gEnableCloseLoop=1
#Data Inactivity Timeout when in powersave (in ms)
gDataInactivityTimeout=200
# VHT Tx/Rx MCS values
# Valid values are 0,1,2. If commented out, the default value is 0.
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
gVhtRxMCS=2
gVhtTxMCS=2
# Enable CRDA regulatory support by settings default country code
#gCrdaDefaultCountryCode=TW
# Scan Timing Parameters
# gPassiveMaxChannelTime=110
# gPassiveMinChannelTime=60
# gActiveMaxChannelTime=40
# gActiveMinChannelTime=20
#If set to 0, MCC is not allowed.
gEnableMCCMode=1
# 1=enable STBC; 0=disable STBC
gEnableRXSTBC=1
# Enable Active mode offload
gEnableActiveModeOffload=1
#Enable Scan Results Aging based on timer
#Timer value is in seconds
#If Set to 0 it will not enable the feature
gScanAgingTime=0
#Enable Power saving mechanism Based on Android Framework
#If set to 0 Driver internally control the Power saving mechanism
#If set to 1 Android Framwrok control the Power saving mechanism
isAndroidPsEn=1
#disable LDPC in STA mode if the AP is TXBF capable
gDisableLDPCWithTxbfAP=1
#Enable thermal mitigation
gThermalMitigationEnable=1
#List of Country codes for which 11ac needs to be disabled
#Each country code must be delimited by comma(,)
gListOfNon11acCountryCode=RU,UA,ZA
#Maxium Channel time in msec
gMaxMediumTime = 6000
# 802.11K support
gRrmEnable=1
gRrmOperChanMax=8
gRrmNonOperChanMax=8
gRrmRandIntvl=100
# If set to 1, generate the p2p device address from primary mac address
# with the locally administered bit set
isP2pDeviceAddrAdministrated=1
#Enable Telescopic Beacon wakeup
gEnableDynamicDTIM=0
gIgnoreDtim=0
gTelescopicBeaconWakeupEn=1
telescopicBeaconTransListenInterval=2
telescopicBeaconTransListenIntervalNumIdleBcns=10
telescopicBeaconMaxListenInterval=3
telescopicBeaconMaxListenIntervalNumIdleBcns=15
END
# Note: Configuration parser would not read anything past the END marker
xinfernal said:
Wifi range is terrible and keeps disconnecting me, what's the best way to edit these settings?
Code:
# This file allows user to override the factory
# defaults for the WLAN Driver
# Enable IMPS or not
gEnableImps=1
# Enable/Disable Idle Scan
gEnableIdleScan=0
# Increase sleep duration (seconds) during IMPS
# 0 implies no periodic wake up from IMPS. Periodic wakeup is
# unnecessary if Idle Scan is disabled.
gImpsModSleepTime=0
# Enable BMPS or not
gEnableBmps=0
# Enable suspend or not
# 1: Enable standby, 2: Enable Deep sleep, 3: Enable Mcast/Bcast Filter
gEnableSuspend=3
# Phy Mode (auto, b, g, n, etc)
# Valid values are 0-9, with 0 = Auto, 4 = 11n, 9 = 11ac
gDot11Mode=0
# Handoff Enable(1) Disable(0)
gEnableHandoff=0
# CSR Roaming Enable(1) Disable(0)
gRoamingTime=0
# Assigned MAC Addresses - This will be used until NV items are in place
# Each byte of MAC address is represented in Hex format as XX
Intf0MacAddress=000AF58989FF
Intf1MacAddress=000AF58989FE
Intf2MacAddress=000AF58989FD
Intf3MacAddress=000AF58989FC
# UAPSD service interval for VO,VI, BE, BK traffic
InfraUapsdVoSrvIntv=0
InfraUapsdViSrvIntv=0
InfraUapsdBeSrvIntv=0
InfraUapsdBkSrvIntv=0
# Make 1x1 the default antenna configuration
gNumRxAnt=1
# Beacon filtering frequency (unit in beacon intervals)
gNthBeaconFilter=50
# Enable WAPI or not
# WAPIIsEnabled=0
# Flags to filter Mcast abd Bcast RX packets.
# Value 0: No filtering, 1: Filter all Multicast.
# 2: Filter all Broadcast. 3: Filter all Mcast abd Bcast
McastBcastFilter=3
#Flag to enable HostARPOffload feature or not
hostArpOffload=1
#SoftAP Related Parameters
# AP MAc addr
gAPMacAddr=000AF589dcab
# 802.11n Protection flag
gEnableApProt=1
#Enable OBSS protection
gEnableApOBSSProt=1
#Enable TrafficMonitor
gEnableTrafficMonitor=1
#Set TracfficIdleTimeout
gTrafficIdleTimeout=3000
#Enable/Disable UAPSD for SoftAP
gEnableApUapsd=0
# Fixed Rate
gFixedRate=0
# Maximum Tx power
# gTxPowerCap=100
# Fragmentation Threshold
# gFragmentationThreshold=2346
# RTS threshold
RTSThreshold=2347
# Intra-BSS forward
gDisableIntraBssFwd=0
# WMM Enable/Disable
WmmIsEnabled=0
# 802.11d support
g11dSupportEnabled=1
# 802.11h support
g11hSupportEnabled=1
# CCX Support and fast transition
CcxEnabled=0
FastTransitionEnabled=1
ImplicitQosIsEnabled=1
gNeighborScanTimerPeriod=200
gNeighborLookupThreshold=76
gNeighborReassocThreshold=81
gNeighborScanChannelMinTime=20
gNeighborScanChannelMaxTime=30
gMaxNeighborReqTries=3
# Legacy (non-CCX, non-802.11r) Fast Roaming Support
# To enable, set FastRoamEnabled=1
# To disable, set FastRoamEnabled=0
FastRoamEnabled=1
#Check if the AP to which we are roaming is better than current AP in terms of RSSI.
#Checking is disabled if set to Zero.Otherwise it will use this value as to how better
#the RSSI of the new/roamable AP should be for roaming
RoamRssiDiff=3
# If the RSSI of any available candidate is better than currently associated
# AP by at least gImmediateRoamRssiDiff, then being to roam immediately (without
# registering for reassoc threshold).
# NOTE: Value of 0 means that we would register for reassoc threshold.
gImmediateRoamRssiDiff=10
# To enable, set gRoamIntraBand=1 (Roaming within band)
# To disable, set gRoamIntraBand=0 (Roaming across band)
gRoamIntraBand=0
# SAP Country code
# Default Country Code is 2 bytes, 3rd byte is optional indoor or out door.
# Example
# US Indoor, USI
# Korea Outdoor, KRO
# Japan without optional byte, JP
# France without optional byte, FR
#gAPCntryCode=USI
#Short Guard Interval Enable/disable
gShortGI20Mhz=1
gShortGI40Mhz=1
#Auto Shutdown Value in seconds. A value of 0 means Auto shutoff is disabled
gAPAutoShutOff=0
# SAP auto channel selection configuration
# 0 = disable auto channel selection
# 1 = enable auto channel selection, channel provided by supplicant will be ignored
gApAutoChannelSelection=1
# Listen Energy Detect Mode Configuration
# Valid values 0-128
# 128 means disable Energy Detect feature
# 0-9 are threshold code and 7 is recommended value from system if feature is to be enabled.
# 10-128 are reserved.
# The EDET threshold mapping is as follows in 3dB step:
# 0 = -60 dBm
# 1 = -63 dBm
# 2 = -66 dBm
# ...
# 7 = -81 dBm
# 8 = -84 dBm
# 9 = -87 dBm
# Note: Any of these settings are valid. Setting 0 would yield the highest power saving (in a noisy environment) at the cost of more range. The range impact is approximately #calculated as:
#
# Range Loss (dB) = EDET threshold level (dBm) + 127 dBm.
#
gEnablePhyAgcListenMode=128
#Preferred channel to start BT AMP AP mode (0 means, any channel)
BtAmpPreferredChannel=0
#Preferred band (both or 2.4 only or 5 only)
BandCapability=0
#Beacon Early Termination (1 = enable the BET feature, 0 = disable)
enableBeaconEarlyTermination=0
beaconEarlyTerminationWakeInterval=3
#Bluetooth Alternate Mac Phy (1 = enable the BT AMP feature, 0 = disable)
gEnableBtAmp=0
#SOFTAP Channel Range selection
gAPChannelSelectStartChannel=1
gAPChannelSelectEndChannel=11
#SOFTAP Channel Range selection Operating band
# 0:2.4GHZ 1: LOW-5GHZ 2:MID-5GHZ 3:HIGH-5GHZ 4: 4.9HZ BAND
gAPChannelSelectOperatingBand=0
#Channel Bonding
gChannelBondingMode5GHz=1
#Enable Keep alive with non-zero period value
#gStaKeepAlivePeriod = 30
#AP LINK MONITOR TIMEOUT is used for both SAP and GO mode.
#It is used to change the frequency of keep alive packets in the AP Link Monitor period which is by
#default 20s. Currently the keep alive packets are sent as an interval of 3s but after this change
#the keep alive packet frequency can be changed.
#gApLinkMonitorPeriod = 3
#If set will start with active scan after driver load, otherwise will start with
#passive scan to find out the domain
gEnableBypass11d=1
#If set to 0, will not scan DFS channels
gEnableDFSChnlScan=1
gVhtChannelWidth=2
gEnableLogp=1
# Enable Automatic Tx Power control
gEnableAutomaticTxPowerControl=1
# 0 for OLPC 1 for CLPC and SCPC
gEnableCloseLoop=1
#Data Inactivity Timeout when in powersave (in ms)
gDataInactivityTimeout=200
# VHT Tx/Rx MCS values
# Valid values are 0,1,2. If commented out, the default value is 0.
# 0=MCS0-7, 1=MCS0-8, 2=MCS0-9
gVhtRxMCS=2
gVhtTxMCS=2
# Enable CRDA regulatory support by settings default country code
#gCrdaDefaultCountryCode=TW
# Scan Timing Parameters
# gPassiveMaxChannelTime=110
# gPassiveMinChannelTime=60
# gActiveMaxChannelTime=40
# gActiveMinChannelTime=20
#If set to 0, MCC is not allowed.
gEnableMCCMode=1
# 1=enable STBC; 0=disable STBC
gEnableRXSTBC=1
# Enable Active mode offload
gEnableActiveModeOffload=1
#Enable Scan Results Aging based on timer
#Timer value is in seconds
#If Set to 0 it will not enable the feature
gScanAgingTime=0
#Enable Power saving mechanism Based on Android Framework
#If set to 0 Driver internally control the Power saving mechanism
#If set to 1 Android Framwrok control the Power saving mechanism
isAndroidPsEn=1
#disable LDPC in STA mode if the AP is TXBF capable
gDisableLDPCWithTxbfAP=1
#Enable thermal mitigation
gThermalMitigationEnable=1
#List of Country codes for which 11ac needs to be disabled
#Each country code must be delimited by comma(,)
gListOfNon11acCountryCode=RU,UA,ZA
#Maxium Channel time in msec
gMaxMediumTime = 6000
# 802.11K support
gRrmEnable=1
gRrmOperChanMax=8
gRrmNonOperChanMax=8
gRrmRandIntvl=100
# If set to 1, generate the p2p device address from primary mac address
# with the locally administered bit set
isP2pDeviceAddrAdministrated=1
#Enable Telescopic Beacon wakeup
gEnableDynamicDTIM=0
gIgnoreDtim=0
gTelescopicBeaconWakeupEn=1
telescopicBeaconTransListenInterval=2
telescopicBeaconTransListenIntervalNumIdleBcns=10
telescopicBeaconMaxListenInterval=3
telescopicBeaconMaxListenIntervalNumIdleBcns=15
END
# Note: Configuration parser would not read anything past the END marker
Click to expand...
Click to collapse
having the same issue. fresh install android O. did you ever find any info about this?
ElwOOd_CbGp said:
having the same issue. fresh install android O. did you ever find any info about this?
Click to expand...
Click to collapse
I can't remember if there was a solution but overall the Xperia SP wasn't good enough for my needs so I replaced it within the year.