tried with nokia care suite, but always get recovery failed error
i dont know where i am wrong
hi
i'm from hongkong and i have lumia 820
yesterday i upgrade to 8.1
but the cangjie input cant use anymore
if i choose this from keyboard, the device will restart
i tried hard reset and reinstall it, but no luck
anyone have this problem too
or anyone can help?
its been one of those nights !!
My trusty old lumia 720 is on o2 Uk and Cyan became available today
currently the phone was running 8.1 dp but not update 1
as is the way the phone would not dl Cyan as 8.1 dp is blocked from recieving Cyan
tried to downgrade to 8.0 with NSRT but the software would not write to the Rom
reinstalled pc NSRT , ran the software and at 1% write, the process failed !!
NSRT as usual says power and vol down and click ok to recover on Pc
tried everything but the phone is now un responsive, appearing dead
no matter what i cannot get a flicker from it
my guess is the write process over wrote the start of the rom enough to stop a boot
i have had a dable with the NCS software but i am missing the top option ?? which is shown in the walkthrough
can any of you guys throw any light on or IF the phone is recoverable at all ??
It is very simple method dude.
1st install latest NSRT(WP8.1 compatible) with required drivers & tools.
Check your phone driver also Boot Manager driver sometimes it fails. check your .ffu online, download & write.
lumiamike said:
its been one of those nights !!
My trusty old lumia 720 is on o2 Uk and Cyan became available today
currently the phone was running 8.1 dp but not update 1
as is the way the phone would not dl Cyan as 8.1 dp is blocked from recieving Cyan
tried to downgrade to 8.0 with NSRT but the software would not write to the Rom
reinstalled pc NSRT , ran the software and at 1% write, the process failed !!
NSRT as usual says power and vol down and click ok to recover on Pc
tried everything but the phone is now un responsive, appearing dead
no matter what i cannot get a flicker from it
my guess is the write process over wrote the start of the rom enough to stop a boot
i have had a dable with the NCS software but i am missing the top option ?? which is shown in the walkthrough
can any of you guys throw any light on or IF the phone is recoverable at all ??
Click to expand...
Click to collapse
The Nokia Software Recovery Tool is a funny thing. I've been using it a lot the last few days, and I've had lots of problems. I used it on a 1520. The USB recognizes the phone and when it restarts to install the software the PC doesn't recognize the phone. That happens on ONE of my two USB drives.
When I used it with my 1020, the NSRT didn't even recognize the phone. The PC did because it opened up the WP app automatically but NSRT said "Please Connect Phone" still.
All of these problems were solved by simply using a different PC and that is my advice to you. If that doesn't work, take it into a Microsoft Store.
Please help my nokia x2 software 2.1.0.13 ..I installed Google services and root...after I turned it off it just keep restarting..I flash it with Nokia care suite with V( 2.1.0.11 and 2.1.0.12 and 2.1.0.13 ) but all these versions have the same issue and no use just keep restaring.. I tried to wipecash and reset factory.. I also used nokia software updater.. thanks in advance
omerx2 said:
Please help my nokia x2 software 2.1.0.13 ..I installed Google services and root...after I turned it off it just keep restarting..I flash it with Nokia care suite with V( 2.1.0.11 and 2.1.0.12 and 2.1.0.13 ) but all these versions have the same issue and no use just keep restaring.. I tried to wipecash and reset factory.. I also used nokia software updater.. thanks in advance
Click to expand...
Click to collapse
I think you should take one more try on 2.1.0.13.. and confirm it thAT this is 2.1.0.13....
omerx2 said:
Please help my nokia x2 software 2.1.0.13 ..I installed Google services and root...after I turned it off it just keep restarting..I flash it with Nokia care suite with V( 2.1.0.11 and 2.1.0.12 and 2.1.0.13 ) but all these versions have the same issue and no use just keep restaring.. I tried to wipecash and reset factory.. I also used nokia software updater.. thanks in advance
Click to expand...
Click to collapse
I have had similar issue, my phone sometimes started after leaving my phone for several minites. But there was no network. I googled and found that this happens because of corrupted imei partition. Gave it to nokia care they fixed it free under warrenty.
I downgraded it with V 2.0.0.11 but after selecting language it hangs on (please wait) then restart again..I downloaded Rm-1013 2.1.0.13 059V782 via (nokia software updater for retail) and just has boot loop...do you suggest me a soultion please? thanks
Oh, maybe cuz with( V 2.0.0.11 ) it starts normaly but when after selecting language it hangs on (please wait)for a long time then reboot but when I flashed it with (2.1.0.12 and 2.1.0.13) it complete sucessfully ...but loop boot again....please tell me how to fix it. If you already know .Cuz I have no Nokia Care
in here......thanks in advance
Mine's not starting.
My phone was stuck on bootloop so I tried to flash it, nut in during the process, the phone just went off. Now it's not even booting into recovery. Help please! All it shows is QHSUSB_BULK in my devices and printers. Anything useful would be really appreciated.
install Nokia Care Suite Select (NO CONNECTION) and uncheck Automatic product selecting plug in your phone then flash it..
Doesn't work
omerx2 said:
install Nokia Care Suite Select (NO CONNECTION) and uncheck Automatic product selecting plug in your phone then flash it..
Click to expand...
Click to collapse
I tried already. I didn't work. My phone isn't even responding to any thing I do again. Doesn't come on. All it shows is QHSUSB_BULK in devices and printers. I also can't flash because my phone doesn't show the Nokia logo that allows me start the flashing process.
so.your phone is bricked ! take it to nokia care or a technician who has tools box or dongle ..it cannot be fixed with at home.. or check this http://forum.xda-developers.com/nokia-x2/general/tutorial-unbrick-nokia-x2-t2905280
in my case, the problem started after trying to update super su..
omerx2 said:
Please help my nokia x2 software 2.1.0.13 ..I installed Google services and root...after I turned it off it just keep restarting..I flash it with Nokia care suite with V( 2.1.0.11 and 2.1.0.12 and 2.1.0.13 ) but all these versions have the same issue and no use just keep restaring.. I tried to wipecash and reset factory.. I also used nokia software updater.. thanks in advance
Click to expand...
Click to collapse
I have had the same problem with my nokia x2 About 2 months ago.I had tried everything you mentioned above but nothing worked.The handset kept restarting and there were no signal on both of my sim cards.So, i unrooted my device using nokia xtools and gave it to nokia care.I told them that the problem started after trying to update it
Then they replaced my x2's whole motherboard under warrenty.It took almost 2 month to get my x2 Back and now it's working fine.
Best of luck bro...trust me there's no other way to fix this without nokia care.
your phone may work like in the following screenshot.. you need nokia bb5 Best tool box
Hi,I'm trying to install windows 10 preview on my lumia 530.downloaded the insider app and selected slow ring and restarted.after that I have gone to settings-phone update and selected check for update,but it says your phone was up to date,It doesnt downloading any updates,then againg i have opened insider app and selected fast ring this time,but it says "windows already configuring updates and try to install them on settings-phone update",but in settings it says your phone was uptodate,Is my phone downloading updates insidely or any problem is there,I have waited for 2 days thinking that it may updating insidely my phone,but there is no updates yet....please help me for this
thanks in advance
Any help please?
Thanks a lot.
Regards.
Lumia 530 is not ready yet.