My sister transferred the android files and ran the install on my touchpad without checking to see if it was in developer mode (I don't know if that is relevant) after she ran the install it came up with an error, turned off, and now it is stuck at the hp logo when you first turn it on.
When I hold the power button the screen turns off, when I hold it again it turns on but it's stuck at the logo.
We tried webos doctor but it was getting stuck at 8%
any suggestions?
Sound like you have corrupted USB partition.
Go here. Happened to me. It worked!
http://forum.xda-developers.com/showthread.php?p=20989526
Will not pass the HP logo
I have a touchpad that is stuck on the logo and will not do anything except charge and deplete that charge. I was attempting to install CM10 on this pad, after being successful with numerous others it was just a normal walk in the park. I had just recently used the cm software on my personal pad and it works perfect. I did the install as normal, at the end the pad began to boot up and stayed in the logo screen. I have attempted to use the debrick and other methods of repair to no avail. I would like to fix this problem prior to the complete end of HP support in January 2015. Thanks so much for any and all assistance in my endeavor to fix this pad.
Rich
I hope this is in the right place. And I did search and did not find anything of help
I have a ASUS MeMO Pad Smart 10 Model: K001
I do not know much about it, but was told they tried to root it. It is stuck in a boot loop. Up at the top left it says, "The Device is Unlocked." and shows ASUS screen then reboots after about 3 seconds. And that is all it will do.
I tried holding power and volume up. power and volume down. power and middle of volume. none did anything.
I just want it back working, it can be rooted or not or custom firmware rom or not.
I appreciate any feedback or help. Thank you!
Hi there,
Yesterday I’ve received the Teclast X98 3G Tablet (Windows 10/Android 5, 64GC EMMC). After the first start I chose Windows 10 to start initially. Since then I am in a bootloop. Red logo flashes every 10 seconds, thereafter I can see a black screen with “9C” in the bottom right corner.
Have you experienced such a problem too? How can I reset the bootloader? Should I return my tablet, or is it just a small problem?
Thanks in advance.
Slay
Before turn on the tablet keep vol + and press power button then choose android to boot .
Thanks for answering.
Volume+ & Power doesn't work. Same loop as described above. I can only start the DNX-Mode.
Video demonstration: https://dl.dropboxusercontent.com/u/45730680/MOV_0001.MP4
connect keyboard with otg enter in bios load setup default save and restart if not solve your problem , hold power for 20 second for clean power off , charging tablet for many hour and try to restart
soudara said:
connect keyboard with otg enter in bios load setup default save and restart if not solve your problem , hold power for 20 second for clean power off , charging tablet for many hour and try to restart
Click to expand...
Click to collapse
Doesn't fix the problem. I`ve tried it with a full battery.
It looks like that after the red-logo disappears there is a command-window with the two letters "9C" in the bottom right corner.... I don't understand whats wrong there. Is it the dual-bootloader or Windows....?!
Is there an other opportunity to completely reset (factory reset) the device? Holding 20 sec. the power button ends in shutting off an starting the tablet again.
Should I try to flash Bios 2.02 or something else? I worry about loosing my Windows 8.1/10 key on this way. GearBest doens't respond to my ticket concerning return of device.
Thanks !
What about flashing mirek`s rom with partitioning in dnx mode with mft tool http://forum.xda-developers.com/showpost.php?p=62823546&postcount=6 ?
Android works well, but the Windows Boot Manager seems to be corrupted. I will send back the device. It must be a physical defect in the device. Overall it is well built and feels sturdy and android runs nicely. Therefore I hope that GearBest will send me a new one ...
Apropos GearBest: Ticket opened on Wednesday, no answer since now. I wrote a message on facebook directly and hope now for a quick solution because the device was "dead on arrival".
Thank you all for your answers / help!
Hi Friends,
Looks like i have hard bricked my 1380F Yoga 2 Pro. I had upgraded my yoga to Lollipop and was trying to downgrade to kitkat. When i press power on button nothing happens. When i charge, only poweron button light keeps flashing. I have the same problem as rajan2002 https://forum.xda-developers.com/thi...t3240487/page6 . Needs Bios file. Can anyone help?
Asus memo pad 7 touch screen stopped working
try to solve problem press power button + volume down shutdown but still not working
then l tried reset factory settings but nothing
please help .