Related
2 nights ago I thought I would have a go at installing ULTIMATE ROM 3.0. I have flashed many Roms on my Galaxy S before and not had a problem yet. I have ClockworkMod Recovery 2.5.1.0 installed.
However, this time- something went wrong. I don't think the installation completed properly. When I tried to reboot the system (to go back into my previous ROM) I wasn't able to. The Samsung logo appeared before the phone booted back into Recovery mode.
I tried to re-flash my previous working update.zip but had problems. I wasn't able to properly re-flash as the Installation would abort for various reasons. After doing cache clearing and data/factory reset I still had no luck. I resorted to reformatting the sdcard. Still didn't solve the flashing problem.
Throughout the whole time I was able to adb into the phone, browse the file system and I could push files on to it and take files off. But Kies wouldn't recognise the phone and Odin isn't able to complete a transfer to the phone (not sure why).
Today, I am able to successfully flash update.zip files (at least, that's what it looks like) but the phone ALWAYS boots into ClockwordMod recovery.
I am fast running out of ideas. Does anyone have any suggestion?
How can I tell if my ROMs are really 'there' but I can't access them because ClockworkMod is preventing them from booting?
hmmm... me too.. stuck in a loop, that keeps going back to the CWM recovery menu, and no matter what i do, keeps going back to it... cant even get to the download screen to flash (again).... here i was thinking no matter what happens when installing custom roms, i can always flash to my stable secure rom, but not this time... need some software that can perform surgical operations, any suggestions?
bradels said:
2 nights ago I thought I would have a go at installing ULTIMATE ROM 3.0. I have flashed many Roms on my Galaxy S before and not had a problem yet. I have ClockworkMod Recovery 2.5.1.0 installed.
However, this time- something went wrong. I don't think the installation completed properly. When I tried to reboot the system (to go back into my previous ROM) I wasn't able to. The Samsung logo appeared before the phone booted back into Recovery mode.
I tried to re-flash my previous working update.zip but had problems. I wasn't able to properly re-flash as the Installation would abort for various reasons. After doing cache clearing and data/factory reset I still had no luck. I resorted to reformatting the sdcard. Still didn't solve the flashing problem.
Throughout the whole time I was able to adb into the phone, browse the file system and I could push files on to it and take files off. But Kies wouldn't recognise the phone and Odin isn't able to complete a transfer to the phone (not sure why).
Today, I am able to successfully flash update.zip files (at least, that's what it looks like) but the phone ALWAYS boots into ClockwordMod recovery.
I am fast running out of ideas. Does anyone have any suggestion?
How can I tell if my ROMs are really 'there' but I can't access them because ClockworkMod is preventing them from booting?
Click to expand...
Click to collapse
myrobelle said:
hmmm... me too.. stuck in a loop, that keeps going back to the CWM recovery menu, and no matter what i do, keeps going back to it... cant even get to the download screen to flash (again).... here i was thinking no matter what happens when installing custom roms, i can always flash to my stable secure rom, but not this time... need some software that can perform surgical operations, any suggestions?
Click to expand...
Click to collapse
Thats too bad guys,and i m sorry to hear that news.I would like to havean answer but i dont...
The fact is that since most people in this forum use some custom roms,and all of us think the same,that we can always go back,so it would be great if you give some more details about what happened to you,and mybe why it went wrong,and it would be even better if one of the BIG guys would give some explanation about this...
I already thinking of not updating my rom anymore,dot want to end up in looping too,so lets see if someone will find something.Good luck guys..
By the way,i didnt get it right,CWM recovery cannot load your backup????
I just got an idea,but not sure if or how it would work or not.
Since you can push file with ADB,if soeone made a clean backup with his CWM (o e mail,contacts,setting saved) and send it to you,so that you log in with CWM recovery and flash that ???
Just an idea..maybe stupid dont know...
Its not very clear if youve tried this already but cant you just boot into recovery through adb? or does that not work either?
I tried to install aospCMod-20110201-signed.zip and initially got into a reboot loop....downgraded to the previous version and booted fine. Retried the newest and booted but with many errors. Went back to the last version and now the home, green answer, and search key don't work. Thought It was a hardware problem but found it worked in recovery mode and after unrooting the phone and re-rooting it (I thought I was going to have to take it back to Sprint)
ballen11342 said:
I tried to install aospCMod-20110201-signed.zip and initially got into a reboot loop....downgraded to the previous version and booted fine. Retried the newest and booted but with many errors. Went back to the last version and now the home, green answer, and search key don't work. Thought It was a hardware problem but found it worked in recovery mode and after unrooting the phone and re-rooting it (I thought I was going to have to take it back to Sprint)
Click to expand...
Click to collapse
did you install over the previous version or do a complete wipe? even though you don't need to do a full wipe, sometimes it can prevent looping. use ti backup to save your apps, then do a full wipe - under cwm 3005, format system, data, boot, and cache, then wipe dalvik under advanced. are you using firerat? If so, you may not have allowed enough partition space. for the 2/1/2011 rom, you will need settings of at least 125 2.
*EDIT*
Check out this wiki for more helpful tips.
I think I found the problem...wiped everything and flashed the newest rom and gapp without the circle battery mod....that took care of it..
Thanks
hello, i recently bought used droid 4, found it to be with some leftover data (sms, and such) so first thing i did was a factory reset only to
find it after a while in extact same state. weird thing is that when i factory reset it after removing some apps or changing anything at all it acts
as if i restored some backup instead of wiping device. it spams me with errors every few seconds too which is quite troublesome to say the least.
i searched the internet for an answer (still looking) to this problem but so far got nothing. i mean there are lots of ppl with similiar issue
but no real answer anywhere i looked. i thought maybe flashing some stock rom (dont wanna try anything custom yet since i got lapdock
too and havent checked if webtop works with custom roms yet). is it the right direction in my case or is there some simplier answer to my problem?
thanks in advance
update: cant root it, cant install official update through rsdlite, cant update through other unofficial ways,
it acts as if everything went fine and each time im back to square 1. it aint my first or second journey with rooting,
changing rom but im not really sure what else can i do. also rsdlite cant detect any information about device (imei,
os version, flex drm boot etc are all filled with N/A
install from sdcard also failed - signature verification failed. keeps gettin better. downloading another rom from
official moto website... not expecting anything though
wyklocnik said:
hello, i recently bought used droid 4, found it to be with some leftover data (sms, and such) so first thing i did was a factory reset only to
find it after a while in extact same state. weird thing is that when i factory reset it after removing some apps or changing anything at all it acts
as if i restored some backup instead of wiping device. it spams me with errors every few seconds too which is quite troublesome to say the least.
i searched the internet for an answer (still looking) to this problem but so far got nothing. i mean there are lots of ppl with similiar issue
but no real answer anywhere i looked. i thought maybe flashing some stock rom (dont wanna try anything custom yet since i got lapdock
too and havent checked if webtop works with custom roms yet). is it the right direction in my case or is there some simplier answer to my problem?
thanks in advance
Click to expand...
Click to collapse
uncheck restore data Hard Reset - DROID 4 by MOTOROLA - Verizon Wireless Support
update: cant root it, cant install official update through rsdlite,
Click to expand...
Click to collapse
updates.zips are not installed with rsdlite, XML/firmware is install with rsd lite, but adroid version can not be downgraded
cant update through other unofficial ways,
it acts as if everything went fine and each time im back to square 1. it aint my first or second journey with rooting,
changing rom but im not really sure what else can i do. also rsdlite cant detect any information about device (imei,
os version, flex drm boot etc are all filled with N/A
install from sdcard also failed - signature verification failed. keeps gettin better. downloading another rom from
official moto website... not expecting anything though
Click to expand...
Click to collapse
what official site? use files from my page How to Use RSD Lite to flash a .XML Stock Rom (firmware)
thanks for taking interest
tried factory reset with options You mentioned unchecked, same thing as before.
i did use xml with rsdlite and zip through built in recovery.
tried to find this page i downloaded files but theres too much in yesterdays history, trying those from Your link now.
also tried to update rom ota, but of course theres an error. oh my droid runs 4.0.4, i havent mentioned it before.
also, found in the net schematics for factory cable, was thinking if its worth a shot this way:
http://www.droidforums.net/forum/droid-labs/146492-how-why-make-your-own-motorola-factory-cable-4.html
Factory cable only allows you to power device with low battery/no battery
Sent from my Amazon OtterX using Tapatalk
---------- Post added at 10:33 AM ---------- Previous post was at 10:31 AM ----------
Update zips only update specific system versions, you have to use correct one, and must be complete stock.
Sent from my Amazon OtterX using Tapatalk
from what i read in this post about factory cable it says it boots phone different way than normal thats why i thought maybe
itll be able to successfully update with it. also after every reset of this droid its not a simple matter of apps coming back thru wifi.
wifi is disabled and theyre there right from the start. i can remove some widgets or apps from home screen, i can delete texts,
and after reset theyre all back where they were. its as if every change i made havent been saved. i dont even have to reset phone,
i just need to reboot it to have it all back
phone needs to be in AP Fastboot mode when flashing with rsd lite.
verify md5 checksum for xml file before flashing.
yes, it was in ap fatboot mode, didnt verify the md5 tho.
more importantly, file i downloaded from site You linked passed verification! guess what i found wasnt official updates after all...
i hope this works
wyklocnik said:
from what i read in this post about factory cable it says it boots phone different way than normal thats why i thought maybe
Click to expand...
Click to collapse
Factory/Fastboot cable only uses the alt power (4) pin to power device, there are several pre-made ones
itll be able to successfully update with it. also after every reset of this droid its not a simple matter of apps coming back thru wifi.
wifi is disabled and theyre there right from the start. i can remove some widgets or apps from home screen, i can delete texts,
and after reset theyre all back where they were. its as if every change i made havent been saved. i dont even have to reset phone,
i just need to reboot it to have it all back
Click to expand...
Click to collapse
try reformatting internal sd card, before wiping
---------- Post added at 10:58 AM ---------- Previous post was at 10:53 AM ----------
wyklocnik said:
yes, it was in ap fatboot mode, didnt verify the md5 tho.
more importantly, file i downloaded from site You linked passed verification! guess what i found wasnt official updates after all...
i hope this works
Click to expand...
Click to collapse
there are no official moto download sites, all moto firmware is pulled by people with special access, and reuploaded
try reformatting internal sd card, before wiping
Click to expand...
Click to collapse
is it any different than checking "erase internal storage" when reseting phone?
anyways did it but atm have to recharge battery before trying to wipe it again.
also rom was succesfully updated thru recovery with no errors and after reboot im... back to square 1...
wyklocnik said:
is it any different than checking "erase internal storage" when reseting phone?
Click to expand...
Click to collapse
formatting is different than wiping data, in menu>settings>storage>unmount>format
anyways did it but atm have to recharge battery before trying to wipe it again.
also rom was succesfully updated thru recovery with no errors and after reboot im... back to square 1...
Click to expand...
Click to collapse
did system version change?
same story after formating internal memory.
no changes whatsoever. same homescreen, same widgets/apps present. same system version.
and of course new error every 5 seconds. guess the phone is messed up good.
talk about luck. its second droid 4 i bought. first i bought over a month ago on auction site, it was new. i paid, guy never sent it.
now this one. its like a curse
formatting internal won't wipe, user data, but will wipe backup data.
tried xml with rsdlite now.
after first reboot its supposed to go into the recovery mode right?
it went back in to ap fastboot... and after rsd transfered all the files then it went to bootloader... and now program says reboot is in process while phone sits in recovery mode...
wyklocnik said:
tried xml with rsdlite now.
after first reboot its supposed to go into the recovery mode right?
Click to expand...
Click to collapse
it happens sometimes
it went back in to ap fastboot... and after rsd transfered all the files then it went to bootloader... and now program says reboot is in process while phone sits in recovery mode...
Click to expand...
Click to collapse
select wipe data, then select reboot
done, nothing changed.
also, when rsd works it acts as if it doesnt wait for the phone with operations.
it writes reboot, phone starts to reboot, and long time before it boots back either in ap fastboot mode or into recovery
rsd says its already transfering files, it says reboot again (before phone even gets into fastboot or recovery after 1st reboot) and so on.
wyklocnik said:
done, nothing changed.
also, when rsd works it acts as if it doesnt wait for the phone with operations.
it writes reboot, phone starts to reboot, and long time before it boots back either in ap fastboot mode or into recovery
rsd says its already transfering files, it says reboot again (before phone even gets into fastboot or recovery after 1st reboot) and so on.
Click to expand...
Click to collapse
which fastboot version? 0A.74 , 0A.77?
which xml file?
0A.74
cdma_maserati_9.8.2O-72_VZW-18-2_1ff.xml
looks like you have a failure to write data, don't think there is a fix.
could try my Unbrick Moto device with moto-fastboot.exe
but unlikely that it will work
Rooted, Bootloader unlocked, TWRP installed, Xposed Running. 5.0 - I did not yet update or press update ever, If I have ever accidentally allowed it to begin downloading I kill the download by deleting the file using SDMaid.
I got home, had problems with other devices, phone was on about 40% at this point. I remember hearing the phone reboot, I noticed it went into TWRP, which was strange, I restarted system > powered up > lockscreen > restart to twrp with no interaction. Phone is now getting low 21%ish. Fix permissions - because used to be the all out fix on my other devices.
Same thing again > straight into twrp.
I notice that some scripts have been ran in the twrp console. Something along the lines of Victara_en_US.zip Some red scripts I assume saying failed to update.
I assume the phone is now too low to power up.
It shows no sign of charging since leaving the last twrp reboot.
Green light in top speaker shows when attempting to power up with usb charger plugged in > nothing else happens.
With charger unplugged from phone I see my modified logo screen and the moto planet spinning before phone turns off completely. This process now repeats.
Anyone have any idea what the hell is wrong with my phone?
EDIT UPDATE:
Managed to get into the fastboot menu:
Battery Low (RED)
Device is UNLOCKED status code 3 (YELLOW)
Software status modified (YELLOW)
As normal aside from Battery...
THE-M1GHTY-BUKO said:
EDIT UPDATE:
Managed to get into the fastboot menu:
Battery Low (RED)
Device is UNLOCKED status code 3 (YELLOW)
Software status modified (YELLOW)
As normal aside from Battery...
Click to expand...
Click to collapse
Get your phone into TWRP and connect it to your charger and let it charge to at least 70% Use Advanced Wipe in TWRP, select Cache and wipe that. Then see if your phone will start normally. Somehow you have downloaded the update file and it is trying to run automatically. Since your phone is modified, the update fails (and nothing is updated or changed.) The update file is in /cache so wiping that should correct the problem. You should go ahead and update to the Stagefright patched version of your ROM so you aren't having to deny the factory update all the time.
mikeoswego said:
Get your phone into TWRP and connect it to your charger and let it charge to at least 70% Use Advanced Wipe in TWRP, select Cache and wipe that. Then see if your phone will start normally. Somehow you have downloaded the update file and it is trying to run automatically. Since your phone is modified, the update fails (and nothing is updated or changed.) The update file is in /cache so wiping that should correct the problem. You should go ahead and update to the Stagefright patched version of your ROM so you aren't having to deny the factory update all the time.
Click to expand...
Click to collapse
Attempting this now....
Phone still boots to a black screen. I don't understand why it would download the update let alone attempt to install it, I religiously deny the update. Also why would it have booted up normally then forced itself into TWRP? :S
What can I next? I dont mind wiping using fastboot as I managed to take all my files off the phone via twrp.
This happened to me a couple times but wiping the cache AND the dalvik cache fixed it. If it still doesn't work, I hope you have a backup because you are going to have to wipe the system and data next. Sometimes these updates like to link themselves to all the phone's partitions, and in that case you should wipe everything and restore your full system and data backup in recovery.
TyNote3Krill said:
This happened to me a couple times but wiping the cache AND the dalvik cache fixed it. If it still doesn't work, I hope you have a backup because you are going to have to wipe the system and data next. Sometimes these updates like to link themselves to all the phone's partitions, and in that case you should wipe everything and restore your full system and data backup in recovery.
Click to expand...
Click to collapse
I wiped both the first time I tried it :-/
I don't have a system backup as a far as I am aware, need to check main pc for something like that. I had a lot of trouble with no signal after changing my phone to x1095 so I could root it etc. Just hope I don't have the same trouble again. Can i reinstall the system through twrp? Or do I need to flash via fastboot?
Whats my best option, system files wise, for fixing this?
THE-M1GHTY-BUKO said:
I wiped both the first time I tried it :-/
I don't have a system backup as a far as I am aware, need to check main pc for something like that. I had a lot of trouble with no signal after changing my phone to x1095 so I could root it etc. Just hope I don't have the same trouble again. Can i reinstall the system through twrp? Or do I need to flash via fastboot?
Whats my best option, system files wise, for fixing this?
Click to expand...
Click to collapse
If you dont have a backup, at this point, I don't see any other options besides formatting your data or flashing the stock firmware. Of course, don't just take my word for it, but in the future just make sure you have a working backup available.
TyNote3Krill said:
If you dont have a backup, at this point, I don't see any other options besides formatting your data or flashing the stock firmware. Of course, don't just take my word for it, but in the future just make sure you have a working backup available.
Click to expand...
Click to collapse
Am I able to flash anything other than the stock 5.0? Last I checked I had converted whatever I had to the x1095. I remember everything being easier on other phones...
Yes, you can, just make sure you have the right file for the job. They are usually about 2 gigs, and they take forever to flash. Note that once you flash the file, your phone will be as if you just bought it from the store, but it always will boot if you have the corresponding build.
THE-M1GHTY-BUKO said:
Attempting this now....
Phone still boots to a black screen. I don't understand why it would download the update let alone attempt to install it, I religiously deny the update. Also why would it have booted up normally then forced itself into TWRP? :S
What can I next? I dont mind wiping using fastboot as I managed to take all my files off the phone via twrp.
Click to expand...
Click to collapse
In TWRP, make a backup now even though it may not be useful depending on what the problem is. Then, use advanced wipe in TWRP and wipe data. If the phone will boot now, something got corrupted in data and you'll just need to set your phone up again. If the problem continues, you'll have to flash your system image. How to do this varies with the model of your phone; some models have TWRP images, others need to use fastboot files. After you flash the new system image, you can either just continue to clean setup the phone, or you can try to restore only data from the backup you made previously.
TyNote3Krill said:
Yes, you can, just make sure you have the right file for the job. They are usually about 2 gigs, and they take forever to flash. Note that once you flash the file, your phone will be as if you just bought it from the store, but it always will boot if you have the corresponding build.
Click to expand...
Click to collapse
Does that include 5.1 roms? I can never seem to find x1095 5.1 roms, or anything for that matter, they are all titled with every other version.
mikeoswego said:
In TWRP, make a backup now even though it may not be useful depending on what the problem is. Then, use advanced wipe in TWRP and wipe data. If the phone will boot now, something got corrupted in data and you'll just need to set your phone up again. If the problem continues, you'll have to flash your system image. How to do this varies with the model of your phone; some models have TWRP images, others need to use fastboot files. After you flash the new system image, you can either just continue to clean setup the phone, or you can try to restore only data from the backup you made previously.
Click to expand...
Click to collapse
I tried wiping data to no avail.
Im trying to download stock 5.0 for now but the download is taking decades for some reason. Do you, or anyone else, recommend any roms which I can easily flash without having to worry about modem files?
THE-M1GHTY-BUKO said:
Does that include 5.1 roms? I can never seem to find x1095 5.1 roms, or anything for that matter, they are all titled with every other version.
Click to expand...
Click to collapse
Hopefully this could provide more information for your situation?
http://forum.xda-developers.com/moto-x-2014/development/rom-xt1095-flashable-stock-rom-t3185945
Thank you for your help, as well as anyone else who helped me. I now have a running phone on 5.1.
How do I gain root from here? My superuser app updated and now tells me I have no binary, despite telling me to flash something only 5 minutes prior.
Sent from my XT1095 using XDA Free mobile app
So you don't have root? I would suggest rooting using towelroot. Go online and search "towelroot" click on the first result, click on the lambda to download the apk, and install it. You can then open the app, and press "make it ra1n" to root your device without any reboot needed.
I had root prior to wiping and installing the 5.1 update that was linked to me. Towelroot gives me the phone not supported message.
Sent from my XT1095 using XDA Free mobile app
Towel root does not work in 5.1.
To root just flash TWRP. Start TWRP. When you exit TWRP it will ask you if you want to root it. Simple.
Sent from my XT1095 using Tapatalk
I'm still in the "phone not responding" phase.. how did you manage to get in the bootloader from there? Tnx!
I found a chainfire autoroot IMG that rooted my phone. Found xposed too. I'm back at a fully working phone now, thank you to all who helped me.
Gotta say, the battery life on 5.1 is a hell of a lot better.
Sent from my XT1095 using XDA Free mobile app
As in you can't get it to fastboot?
I left it to charge for a while, then took about 5 minutes attempting the power button volume button combo to restart and get it into fastboot.
I believe that it's something like:
Power + vol down until the phone screen flashes/green light goes off
Then
Still holding the power and volume down
Hold the vol up too
Then release the power still holding the vol up and down.
That's what worked for me. It's literally the most awkward phone I've had go button combos.
I think vol up from powered off works too.
If you mess up just hold the power and vol down again.
Sent from my XT1095 using XDA Free mobile app
Hello Friends,
Yesterday I was chatting on whatsapp and suddenly my le2 restarts, and then a blue splash screen appears and device keeps on booting,
hence I went to recovery and clear the data, but that also didnt help me,
Then i flash the 13s rom via Flashone 1.9 then also same problem happens, sometimes it went to optimizing apps 3 of 4 and again restarts with blue LED, i were unable to switch it off,
after draining the whole battery I keep mobile to charge but now it is not charging, it only showing Red Solid LED Continuously.
Now I am also Unable to boot into recovery or fastboot mode.
I again flash the stock 13s rom via flashone 1.9 , i got success msg but then also mobile is not booting nor it is charging.
Note: I am on complete stock rom on locked bootloader, never unlocked or rooted, used as come in box.
Please give me a solution on this, I have searched everywhere but not getting any solutions.
Thanks in advance
Try to check your USB cable, most of the time charging issue is due to cable
shubham1358 said:
Try to check your USB cable, most of the time charging issue is due to cable
Click to expand...
Click to collapse
Cable is ok. I have another Le2 and it is charging with that cable very well
I am facing same problem. How you solve this issue? Blue led blinks after flashing any rom and bootloop.
xerol said:
Hello Friends,
Yesterday I was chatting on whatsapp and suddenly my le2 restarts, and then a blue splash screen appears and device keeps on booting,
hence I went to recovery and clear the data, but that also didnt help me,
Then i flash the 13s rom via Flashone 1.9 then also same problem happens, sometimes it went to optimizing apps 3 of 4 and again restarts with blue LED, i were unable to switch it off,
after draining the whole battery I keep mobile to charge but now it is not charging, it only showing Red Solid LED Continuously.
Now I am also Unable to boot into recovery or fastboot mode.
I again flash the stock 13s rom via flashone 1.9 , i got success msg but then also mobile is not booting nor it is charging.
Note: I am on complete stock rom on locked bootloader, never unlocked or rooted, used as come in box.
Please give me a solution on this, I have searched everywhere but not getting any solutions.
Thanks in advance
Click to expand...
Click to collapse
I also have the exact same problem. Phone started rebooting as soon as it booted up. Somehow i managed to unlock the bootloader, but to no avail. Can't seems to find any rom which can boot up. So practically i have a bricked device with trwp. Formatted the system and other partitions with twrp, flashed many roms. Still the result is same. Bootloops.
Hi,
try to to reimage your phone with QFIL from this site:
https://www.techpoison.in/2017/12/how-to-flash-letv-le-2-x526-stock.html
I downloaded everything from there, QFIL, Sparse image and drivers. My phone was bricked, but its working normally now. After you flash the image your phone should charge normally, just try to boot it up. In my case i had issues with baseband, not detected, no sim function and no wifi and phone was restarting each 3-4 minutes, but it was operable. Basedband issues can be solved by hard reseting the phone and updating it to 21s using the local update, just put the 21s stock renamed to update.zip to internal storage and run system update. When you get the error - APK missing, just boot it up again and retry the local update, should work fine the second time, i just deleted the update.zip and put back again and ran the update.
---------- Post added at 03:24 PM ---------- Previous post was at 03:18 PM ----------
Forthe55 said:
I also have the exact same problem. Phone started rebooting as soon as it booted up. Somehow i managed to unlock the bootloader, but to no avail. Can't seems to find any rom which can boot up. So practically i have a bricked device with trwp. Formatted the system and other partitions with twrp, flashed many roms. Still the result is same. Bootloops.
Click to expand...
Click to collapse
Flash the 21s bootloader + modem, one ZIP file, should work fine. Not sure what ROM did you install last time. You can give it a shot with with MIUI 10 - its nougat.
I had similar issues, see my topic, maybe it helps a bit.
https://forum.xda-developers.com/le-2/help/x526-bricked-unknown-baseband-4g-t3838093
Modem + bootloader 21s.
https://drive.google.com/file/d/0B_R...FxTGxlMHM/view
Brother same thing happened to me, a week ago. I cant say about your problem but my problem was due to faulty power button. Actually due to that reason my phone actually kept restarting itself. It showed red light blinking while charging and wasn't able to bypass the optimizing app screen. I also thought it was a software issue but actually it wasn't. I spent about 2 hours figuring out what the actual problem was. The problem was: As we know when power button is hard pressed for about 10-15 seconds it reboots itself.
Although the repair shop guy didn't put new power button but he added a tiny piece of paper in between the power button and body housing to prevent the issue and voila the problem was solved.
delltech1 said:
Hi,
try to to reimage your phone with QFIL from this site:
https://www.techpoison.in/2017/12/how-to-flash-letv-le-2-x526-stock.html
I downloaded everything from there, QFIL, Sparse image and drivers. My phone was bricked, but its working normally now. After you flash the image your phone should charge normally, just try to boot it up. In my case i had issues with baseband, not detected, no sim function and no wifi and phone was restarting each 3-4 minutes, but it was operable. Basedband issues can be solved by hard reseting the phone and updating it to 21s using the local update, just put the 21s stock renamed to update.zip to internal storage and run system update. When you get the error - APK missing, just boot it up again and retry the local update, should work fine the second time, i just deleted the update.zip and put back again and ran the update.
---------- Post added at 03:24 PM ---------- Previous post was at 03:18 PM ----------
Flash the 21s bootloader + modem, one ZIP file, should work fine. Not sure what ROM did you install last time. You can give it a shot with with MIUI 10 - its nougat.
I had similar issues, see my topic, maybe it helps a bit.
https://forum.xda-developers.com/le-2/help/x526-bricked-unknown-baseband-4g-t3838093
Modem + bootloader 21s.
https://drive.google.com/file/d/0B_R...FxTGxlMHM/view
Click to expand...
Click to collapse
Hi, Thanks. I actually did that first, flashing through qfil the same rom. it helped me to go to settings after umpteen attempts to go past language selection screen, and i was just able to oem unlock and enable usb debugging (actually after a 2nd partial failed flashing). the phone kept freezing within seconds of booting up. Now After i unlocked the bootloader and installing twrp and flashing many roms thru twrp, i am still having the same problem of booting up and freezing at start-up. cant flash again through qfil, as i will again loose the unlocked bootloader and twrp.
At least , now i can try different roms to see which can unbrick it. last one used was the twrp flashable rom based on eui (small eui by aurel) but it also freezes on language selection screen or beyond.
I am running out of ideas, lets see.
2nd partial failed flashing? any issues during the flash process? i had some issues when i used usb 3.0, 2.0 worked fine for me. If you have also charging issues stay in twrp and let the phone charge properly, its slower but should work fine. You can try to flash the 21s bootloader with modem, maybe it will boot properly. But try it only when you are able to enter the fastboot mode, longpress volume down and power for 10-15 seconds, if that is working you should be able to flash twrp via fastboot and you can experiment a bit. Try to find the chinesse twrp 3.0.2.0 and try to flash the stock 21s version. Should be also an image file, in standard twrp go to install - image, after selecting the image file click on recovery and install, after installation go back, reboot, recovery. Copy 21s to storage, wipe data, cache, dalvik and flash it, chinesse twrp will skip version check and will let you install the stock image, after install reboot but click on do not replace recovery button - this will keep the chinesse twrp installed.
If nothing helps it can be only a HW failure, maybe the power button, try usb 2.0 port during the flash process, i had issues with 3.0 on my pc, if that doesnt help.try a different cable, no more suggestions, sorry.
delltech1 said:
2nd partial failed flashing? any issues during the flash process? i had some issues when i used usb 3.0, 2.0 worked fine for me. If you have also charging issues stay in twrp and let the phone charge properly, its slower but should work fine. You can try to flash the 21s bootloader with modem, maybe it will boot properly. But try it only when you are able to enter the fastboot mode, longpress volume down and power for 10-15 seconds, if that is working you should be able to flash twrp via fastboot and you can experiment a bit. Try to find the chinesse twrp 3.0.2.0 and try to flash the stock 21s version. Should be also an image file, in standard twrp go to install - image, after selecting the image file click on recovery and install, after installation go back, reboot, recovery. Copy 21s to storage, wipe data, cache, dalvik and flash it, chinesse twrp will skip version check and will let you install the stock image, after install reboot but click on do not replace recovery button - this will keep the chinesse twrp installed.
Click to expand...
Click to collapse
My phone has been flashed multiple times by qfil method. And always it hangs at initial setup (so it boots up, but hangs at language selection or further up screens, before setup can complete and launcher could be loaded).
While trying to flash again with qfil once it stopped at 25 percent (because the battery went dead). Charged the battery and booted up the phone, and i was surprised it booted up. After 2-3 attempts i was able to reach the launcher screen and immediately enabled developer options and oem unlock / usb debugging. Only had few split seconds to do this and the phone froze again. After that i installed twrp and hence treying different roms. Most fail at setup.
Just tried MIUI 9PRO ROM. It also froze at setup multiple times, but once i was able to complete the setup and miui launcher is up , but it reboots or turn off the phone just after that. So cant do anything with the phone. Unsure of whether a newer bootloader will help in these freezing issues as i have been able to boot up at least in some roms only if for few seconds. Will try to tinker the settings of miui rom (if the phone let me do it before freezing/hanging). Lets see. Thanks for suggestions. More suggestions welcome, because i am still unsure weather this is a software or hardware related problem. I am guessing that it may have something to do with Google security as earlier i was getting msg that phone has been wrongly resetted and needs to verify with Google (but i couldn't get a chance to use the same account, as phone kept freezing at setup).
Did you fully charge the battery, if not let it fully charge in twrp. Flashing the roms in twrp works everytime or do you see any errors? Before you flash anything disconnect the usb cable.
---------- Post added at 09:54 PM ---------- Previous post was at 09:47 PM ----------
Try to flash the 21s bootloarder with modem, one zip using twrp. Go to fastboot mode and wipe modems. fastboot erase modem1st fastboot erase modem2st. Put the phone to flash mode and reimage with qfil. Before you do it write down both imeis, you can find them also on the original package on the backside. Also try to remove all sim cards from the phone and try a different cable. If nothing helps, hw issue, maybe the power button mention earlier in this thread.
After reflash skip everything at setup and reset phone to factory defaults. OEM is already unlocked, you dont have to do it again.
I have charged the phone fully before any flashing after that error. I can flash the phone through twrp without any error msg. The phone boots up most of times in various roms but hangs at or after the initial setup screens show (like language selection etc). Flashed the modem+bootloader, success, but it showed bootloader version as 20s (not 21s). Tried the commands u mentioned to erase modems, it say error failed, no such partition found. I had checked the partitions with parted and 56 partitions are there including the modemst1 & 2.
Now re flashed via qfil , did as advised but again the same problem of hanging / freezing at or after initialization screens of various roms.
Forthe55 said:
I have charged the phone fully before any flashing after that error. I can flash the phone through twrp without any error msg. The phone boots up most of times in various roms but hangs at or after the initial setup screens show (like language selection etc). Flashed the modem+bootloader, success, but it showed bootloader version as 20s (not 21s). Tried the commands u mentioned to erase modems, it say error failed, no such partition found. I had checked the partitions with parted and 56 partitions are there including the modemst1 & 2.
Now re flashed via qfil , did as advised but again the same problem of hanging / freezing at or after initialization screens of various roms.
Click to expand...
Click to collapse
Yeah sorry i screwed the command its fastboot erase modest1 modemst2, my bad.
Just now i was able to complete the initialization (setup screen) of sparse image india rom. I can reach the launcher and settings for few seconds before the device freezes or reboots.
So the same problem , with which i started, the only good thing is that i have been able to set oem unlock to on, so that i can flash trwp and various roms (but all fail with the same freezing issues)
Forthe55 said:
Just now i was able to complete the initialization (setup screen) of sparse image india rom. I can reach the launcher and settings for few seconds before the device freezes or reboots.
So the same problem , with which i started, the only good thing is that i have been able to set oem unlock to on, so that i can flash trwp and various roms (but all fail with the same freezing issues)
Click to expand...
Click to collapse
So you erased modems and reflashed with qfil right? If so i assume its a HW problem. Try the fix with the power button, i ran out of ideas
Last thing which can help maybe: https://www.youtube.com/watch?v=LH3VOIlLfvo&t=135s
Download 21s stock image + the chinesse twrp, links should be under the video, i think so, or look somewhere in the forum for new links. Try to reflash the 21s, some people reported that freezing issues were gone after installing the latest EUI. Basically you can do the same after QFIL reflash but you need enough time to copy the ZIP file as UPDATE.ZIP to the internal storage and run the local update via setting, system update and local update, i hope that TWRP will work for you, just follow the video tutorial.
delltech1 said:
Last thing which can help maybe: https://www.youtube.com/watch?v=LH3VOIlLfvo&t=135s
Download 21s stock image + the chinesse twrp, links should be under the video, i think so, or look somewhere in the forum for new links. Try to reflash the 21s, some people reported that freezing issues were gone after installing the latest EUI. Basically you can do the same after QFIL reflash but you need enough time to copy the ZIP file as UPDATE.ZIP to the internal storage and run the local update via setting, system update and local update, i hope that TWRP will work for you, just follow the video tutorial.
Click to expand...
Click to collapse
Did that also, the same problem. The phone freezes after the os is booted. I was wondering what is that isnt touched by flashing ( in download mode or fastboot mode or through twrp). I may need to tinker that. The roms are all fine in the sense they all stop at the same points. Something in the phones partition, which isnt touched by flashing? (There must be, as i flashed with qfil, the oem unlock remains, the bootloader didn't lock, and it remains unaffected by re-imaging)
Try this, maybe it helps:
https://forum.xda-developers.com/le-2/help/issues-installing-twrp-rom-le-s3-x522-t3618662/page2