Related
Well i flashed Tdunham's rom on the SM-N920P also flashed the second version of Freeza's beastmode kernel and twrp all is well after that unfortunately after doing some looking i found that i must have clicked oem unlock and turned it off and didnt know and shut it off now i get a custom binary blocked by frp lock in the upper left hand corner and i cant boot up the phone or access the bootloader because of it but i can switch to download mode but everything i try to flash comes up as failed can anyone tell if i can fix this?
T9EX said:
Well i flashed Tdunham's rom on the SM-N920P also flashed the second version of Freeza's beastmode kernel and twrp all is well after that unfortunately after doing some looking i found that i must have clicked oem unlock and turned it off and didnt know and shut it off now i get a custom binary blocked by frp lock in the upper left hand corner and i cant boot up the phone or access the bootloader because of it but i can switch to download mode but everything i try to flash comes up as failed can anyone tell if i can fix this?
Click to expand...
Click to collapse
I honestly have no clue what you're saying here. I'm not trying to be the grammar police, but there's not a single comma or period in that entire paragraph.
Are you suggesting that you flashed something (with TWRP) when "OEM unlock" was turned off? Then when you reboot the phone nothing happens except immediately seeing "frp lock" in the upper left corner (and nothing else whatsoever?)
Can you power down the phone? (press/hold volume down and power.) If so, after it's powered down, what happens when you try to boot into bootloader/download/odin mode? What steps are you performing to boot into odin mode from a power off state?
Are you able to boot directly into recovery mode from a powered down state? What steps are you performing to boot into recovery from a powered down state? What happens as a result of those steps?
PLEASE use periods, commas and line breaks to help format your message. Help us to help you...
Gary
garyd9 said:
I honestly have no clue what you're saying here. I'm not trying to be the grammar police, but there's not a single comma or period in that entire paragraph.
Are you suggesting that you flashed something (with TWRP) when "OEM unlock" was turned off? Then when you reboot the phone nothing happens except immediately seeing "frp lock" in the upper left corner (and nothing else whatsoever?)
Can you power down the phone? (press/hold volume down and power.) If so, after it's powered down, what happens when you try to boot into bootloader/download/odin mode? What steps are you performing to boot into odin mode from a power off state?
Are you able to boot directly into recovery mode from a powered down state? What steps are you performing to boot into recovery from a powered down state? What happens as a result of those steps?
PLEASE use periods, commas and line breaks to help format your message. Help us to help you...
Gary
Click to expand...
Click to collapse
i flashed a custom rom, kernel, and twrp everything worked after that, but somehow i wasnt paying attention and turned off oem unlock before i tried to restart my phone. Now when i try and turn it on or boot into recovery i get to the Samsung logo and it says frp lock in the corner. I am holding power, home, and volume up for recovery. And im holding power, home, and volume down for odin. Once i get into odin everything seems ok, but i cannot flash anything else to it. Sorry about the grammar it was kind of late
T9EX said:
i flashed a custom rom, kernel, and twrp everything worked after that, but somehow i wasnt paying attention and turned off oem unlock before i tried to restart my phone. Now when i try and turn it on or boot into recovery i get to the Samsung logo and it says frp lock in the corner. I am holding power, home, and volume up for recovery. And im holding power, home, and volume down for odin. Once i get into odin everything seems ok, but i cannot flash anything else to it. Sorry about the grammar it was kind of late
Click to expand...
Click to collapse
First, I don't think I'll be able to help you myself. However, I'm hoping that my questions might prompt enough information that someone else can...
How do you know that you turned off OEM unlock? Are you SURE that OEM lock was turned off?
I did a quick search on your behalf, and came up with some threads that may (or may not) be useful. At the very least, you might be able to pursue the people who posted in those threads to see what resolution they came up with:
This guy seems to have resolved his issue, but didn't mention how:
http://forum.xda-developers.com/s6-edge-plus/help/bricked-frp-lock-help-to-t3209788
This one seems to think that a stock flash with ODIN should recover:
http://forum.xda-developers.com/sprint-galaxy-s6-edge-plus/help/frp-lock-t3215940
Here's another one that did a stock ODIN flash to recover:
http://forum.xda-developers.com/tmo...ompletely-bricked-s6-edge-g925t-help-t3146069
Based on these, I'd try to get my hands on a full SM-N920P ODIN image and use ODIN. It would have to be a real "P" model tar.md5, probably. Sprint might also be able to re-flash an image on there for you.
You mentioned that you tried ODIN and it didn't work. What did you try to flash with ODIN? Was it an actual Sprint ODIN file? With OEM lock, I believe that the ONLY thing you'll be able to flash is a true n920p image...
Edit: I did a quick search on sammobile for your device type, and here's a link to n920p firmware. (Note to Mods: If this link violates any XDA rules, please edit it accordingly, but if possible leave enough information that the OP can get what he/she needs to recover their device.)
http://www.sammobile.com/firmwares/database/SM-N920P/
Another thought might be to use Samsung's "smart switch" software to do an emergency recovery of the firmware. (I've never used it for that, or anything else, but others have posted that something like this is possible.)
garyd9 said:
First, I don't think I'll be able to help you myself. However, I'm hoping that my questions might prompt enough information that someone else can...
How do you know that you turned off OEM unlock? Are you SURE that OEM lock was turned off?
I did a quick search on your behalf, and came up with some threads that may (or may not) be useful. At the very least, you might be able to pursue the people who posted in those threads to see what resolution they came up with:
This guy seems to have resolved his issue, but didn't mention how:
http://forum.xda-developers.com/s6-edge-plus/help/bricked-frp-lock-help-to-t3209788
This one seems to think that a stock flash with ODIN should recover:
http://forum.xda-developers.com/sprint-galaxy-s6-edge-plus/help/frp-lock-t3215940
Here's another one that did a stock ODIN flash to recover:
http://forum.xda-developers.com/tmo...ompletely-bricked-s6-edge-g925t-help-t3146069
Based on these, I'd try to get my hands on a full SM-N920P ODIN image and use ODIN. It would have to be a real "P" model tar.md5, probably. Sprint might also be able to re-flash an image on there for you.
You mentioned that you tried ODIN and it didn't work. What did you try to flash with ODIN? Was it an actual Sprint ODIN file? With OEM lock, I believe that the ONLY thing you'll be able to flash is a true n920p image...
Edit: I did a quick search on sammobile for your device type, and here's a link to n920p firmware. (Note to Mods: If this link violates any XDA rules, please edit it accordingly, but if possible leave enough information that the OP can get what he/she needs to recover their device.)
http://www.sammobile.com/firmwares/database/SM-N920P/
Another thought might be to use Samsung's "smart switch" software to do an emergency recovery of the firmware. (I've never used it for that, or anything else, but others have posted that something like this is possible.)
Click to expand...
Click to collapse
do you happen to know specifically which image i will have to flash? I'm still kinda new to this world and slowly teaching myself everything through trial and error.
T9EX said:
do you happen to know specifically which image i will have to flash? I'm still kinda new to this world and slowly teaching myself everything through trial and error.
Click to expand...
Click to collapse
I posted a link. There's only one image available at that link. If it's zip'd, unzip it to a file with an extension of "tar.md5"
That goes into the "AP" (or "PDA") slot for ODIN.
Now, I'm going to get on my soapbox for a moment:
Don't flash stuff on your phone without knowing ahead of time the steps to get it back to stock, AND having the tools/files needed to do so. If you ignore this "advice", you have only yourself to blame for any troubles. You're lucky that sammobile has a stock firmware file. (You won't find any AT&T variant files there for this phone.) If they didn't have that stock firmware file, you'd be screwed.
Learn FIRST... and always be prepared for "Uh oh"
He fixed his problem friend I have the same problem.
Dark235 said:
He fixed his problem friend I have the same problem.
Click to expand...
Click to collapse
I fixed mine by extracting each .img file from the stock ROM, then re-compressed back into a .tar file, then flashed each one individually. I don't know if that's what fixed it but that's what I did.
T9EX said:
I fixed mine by extracting each .img file from the stock ROM, then re-compressed back into a .tar file, then flashed each one individually. I don't know if that's what fixed it but that's what I did.
Click to expand...
Click to collapse
Thank you very much for your answer I'll try.
T9EX said:
Well i flashed Tdunham's rom on the SM-N920P also flashed the second version of Freeza's beastmode kernel and twrp all is well after that unfortunately after doing some looking i found that i must have clicked oem unlock and turned it off and didnt know and shut it off now i get a custom binary blocked by frp lock in the upper left hand corner and i cant boot up the phone or access the bootloader because of it but i can switch to download mode but everything i try to flash comes up as failed can anyone tell if i can fix this?
Click to expand...
Click to collapse
To solve the FRP lock is actually very simple
I'll give you a reminder ：“OTG cable”
Dark235 said:
Thank you very much for your answer I'll try.
Click to expand...
Click to collapse
Did you ever manage to fix it?
T9EX said:
Did you ever manage to fix it?
Click to expand...
Click to collapse
Not no fix
Dark235 said:
Thank you very much for your answer I'll try.
Click to expand...
Click to collapse
Dark235 said:
Not no fix
Click to expand...
Click to collapse
Must have been pure luck on my end then
T9EX said:
Must have been pure luck on my end then
Click to expand...
Click to collapse
You have a rom to try.
Dark235 said:
You have a rom to try.
Click to expand...
Click to collapse
I don't quite follow. What exactly do you mean?
T9EX said:
I don't quite follow. What exactly do you mean?
Click to expand...
Click to collapse
You repair you note?
Dark235 said:
You repair you note?
Click to expand...
Click to collapse
Yes I did.
T9EX said:
Yes I did.
Click to expand...
Click to collapse
How did please help?
Dark235 said:
You repair you note?
Click to expand...
Click to collapse
Dark235 said:
How did please help?
Click to expand...
Click to collapse
Well first do you have a software on your computer that has the ability to compress .img files into .tar files? And I would personally recommend having 7zip/WinRAR that way you can actually access the .img files on the stock ROM
T9EX said:
Well first do you have a software on your computer that has the ability to compress .img files into .tar files? And I would personally recommend having 7zip/WinRAR that way you can actually access the .img files on the stock ROM
Click to expand...
Click to collapse
First. Stock ROM img to. Tar =. Tar flash odio?
hey everyone...this is my first post on xda, i need a little help with my sisters in laws phone. basically shes got some crazy ex who has rooted her phone and im trying to fix it for her since hes making her life difficult. i can tell he has a custom bootloader installed. when i boot into recovery its odin not the normal bootloader. i can still boot into download mode but the phone wont boot up...when it does it just says that the firmware update encountered a problem and to use kies in recovery. im not super technically saavy but have flashed a tablet or too. nothing major. any help would be greatly appreciated. i just want this thing back to stock bootloader and firmware like when it came from att. does that sound like its possible. i tried to use some write ups i found online to rewrite the stock firmware and thats when it quit booting up. thanks in advance for any help people!
wigglesrewind said:
hey everyone...this is my first post on xda, i need a little help with my sisters in laws phone. basically shes got some crazy ex who has rooted her phone and im trying to fix it for her since hes making her life difficult. i can tell he has a custom bootloader installed. when i boot into recovery its odin not the normal bootloader. i can still boot into download mode but the phone wont boot up...when it does it just says that the firmware update encountered a problem and to use kies in recovery. im not super technically saavy but have flashed a tablet or too. nothing major. any help would be greatly appreciated. i just want this thing back to stock bootloader and firmware like when it came from att. does that sound like its possible. i tried to use some write ups i found online to rewrite the stock firmware and thats when it quit booting up. thanks in advance for any help people!
Click to expand...
Click to collapse
Scroll down to the notes section in the OP of this link. http://forum.xda-developers.com/showthread.php?t=3149146
Grab ye file from step for and follow instructions. If she is rooted then this will work. It'll take her back to 4.4.2 unrooted.
dirtydodge said:
Scroll down to the notes section in the OP of this link. http://forum.xda-developers.com/showthread.php?t=3149146
Grab ye file from step for and follow instructions. If she is rooted then this will work. It'll take her back to 4.4.2 unrooted.
Click to expand...
Click to collapse
Thanks for taking the time to help with this issue. that file didnt work, i flashed the G900A_OC4_Stock_Partitions firmware and its at least working again. thanks again to everyone who looked and especially dirtydodge for taking time.
Phone is working again guys but was wondering if anyone knows why it keeps giving me this security notice pop up...says that unauthorized actions have been detected and gives me the option to restart or cancel. Sounds like it has something to do with KNOX from my searching. Trying to solve this without rooting. When i check the KNOX counter in D/L mode it says 0x0. Ive updated firmware and security updates to latest versions and it hasnt helped. Anyone have any pointers? As always any help is greatly appreciated. Searched around the web and xda and didnt find what i was looking for.
@wigglesrewind. Chances are is that the phone is still rooted and that's why your getting the notification. Go to the pay store and download "root checker" and see what it says. Also what is your version & baseband. I'm not sure why the "downgrade to nce" file didn't work for you. It might have been a bad download but you should be able to use it if your still on 0C4.
Thanks again dirtydodge for contributing. I did a check with root checker and it says root is not installed. Also used terminal emulator and get a dollar sign in the terminal, not the hash tag. Any ideas?
wigglesrewind said:
Thanks again dirtydodge for contributing. I did a check with root checker and it says root is not installed. Also used terminal emulator and get a dollar sign in the terminal, not the hash tag. Any ideas?
Click to expand...
Click to collapse
I'm not familiar with terminal emulator. The only time I've ever gotten the notification that you talking about is when i have root apps on the phone and certain things aren't froze. But you need to be rooted and have titanium backup to freeze them. What version is on the phone.
Sorry, forgot to add that in the last post...
Baseband version oc4
Kernel 3.4.0
Build number LRX21T.G900AUCU4BOF3
Let me know if you need any other info. Like i said im not very experienced in this
But thanks again for your help. Its greatly appreciated.
wigglesrewind said:
Sorry, forgot to add that in the last post...
Baseband version oc4
Kernel 3.4.0
Build number LRX21T.G900AUCU4BOF3
Let me know if you need any other info. Like i said im not very experienced in this
But thanks again for your help. Its greatly appreciated.
Click to expand...
Click to collapse
Ok well it sounds like your on the latest firmware version. The phone may still have a trace of root somewhere. After you flashed the oc4 Kernel did you do a factory reset. Other than that I'm not sure what to do. But that does explain why you can't use the "downgrade to nce" file. The oc4 build can not be downgraded. I'd do a factory reset from the stock recovery menu and then wipe the cache. If that don't fix it then I'm out of options. Lol. Hope this helps.
Ive tried everything you mentioned except wiping the cache so I'll give that a try. Cross your fingers for me!
you flashed oc4 firmware which is why your baseband is oc4 (baseband is modem.)
What you need to do is download and odin a full odin tar file.. this will wipe everything clean and make it brand new...
Sent from my SM-G925V using XDA Free mobile app
If i were to find a full tar file would i just use the ap box in odin or would i have to do it differently? Usually those full dowloads have multiple files in them (BL and whatever the other ones are... CS maybe? Cant remember and not near the computer right now. Is that what your talking about?
wigglesrewind said:
If i were to find a full tar file would i just use the ap box in odin or would i have to do it differently? Usually those full dowloads have multiple files in them (BL and whatever the other ones are... CS maybe? Cant remember and not near the computer right now. Is that what your talking about?
Click to expand...
Click to collapse
Yup.. youre build is of3 or w.e which to my knowledge not downgradeable.. if you dont plan on keeping it rooted then you can flash latest full tar in odin using the AP slot..
I would recommend trying the oc full tar first if you plan on rerooting it.. the full tar will have multiple files including system, csc, boot etc.
Sent from my SM-G925V using XDA Free mobile app
Thanks alot! I'll find a full tar on here and odin it and see if that fixes it
does anyone have that oc4 one click file or know where i can find it. see it in my searchs but its always the same google drive share and they all say the file doesn't exist.
what do you mean one click?
elliwigy said:
what do you mean one click?
Click to expand...
Click to collapse
G900AUCU3BOC4_OneClick..exe was the file name i kept coming across with links to a google drive account but the file is no longer on there. I'll keep looking. I appreciate you guys lending a hand. I know it can be frustrating trying to help someone with limited understanding of something remotely. You guys are great.
wigglesrewind said:
G900AUCU3BOC4_OneClick..exe was the file name i kept coming across with links to a google drive account but the file is no longer on there. I'll keep looking. I appreciate you guys lending a hand. I know it can be frustrating trying to help someone with limited understanding of something remotely. You guys are great.
Click to expand...
Click to collapse
i understand.. just dont know if thatll work for you lol.. you need a full odin tar.. the one click might just be for root.. try to find a full oc4 tar file
please can anyone help?
I cant find this anywhere.
I did the 5.1.1 update so not sure if I need the original or the updated one?
I think this is the one I had T817AUCU1AOH2
thank you
so with 44 views and no answers , I'm assuming there's no firmware for at&t?
those bastards!
so can't prove I bought it to send it in for warranty repair......
now willing to try anything! any devs have a new hack they need tested?
rredlin said:
so can't prove I bought it to send it in for warranty repair......
now willing to try anything! any devs have a new hack they need tested?
Click to expand...
Click to collapse
Thank @envirocy for this. SM-T817OH1 firmware.
https://drive.google.com/file/d/0B1DaPxlq4YoQUXQ0NG5xVUpKUm8/view?usp=sharing
ashyx said:
Thank @envirocy for this. SM-T817OH1 firmware.
https://drive.google.com/file/d/0B1DaPxlq4YoQUXQ0NG5xVUpKUm8/view?usp=sharing
Click to expand...
Click to collapse
so extracted the zip and put ap in Odin and it worked. but I have no cell signal no lte or anything. it shows att but nadda. did I do some wrong? should I have put all 4 files in the spots in odin?
also I found there is now an oem unlock. does that mean I can unlock this bootloader or get perm root? or twrp?
thanks
You need to flash all of them in the appropriate slots, but you probably can get away with just the modem. That should get your signal back.
Enable OEM unlock before rooting with Kingroot again.
You can't install twrp or supersu as you still have a locked bootloader.
ashyx said:
You need to flash all of them in the appropriate slots, but you probably can get away with just the modem. That should get your signal back.
Enable OEM unlock before rooting with Kingroot again.
You can't install twrp or supersu as you still have a locked bootloader.
Click to expand...
Click to collapse
Thanks my friend, you really do help, not only me but a lot of ppl!
I just did all 4 anyways....
Tried king root 4.8.0 and it put a different kind of warring on screen (blue screen over entire tab that read unauthorized software install, go to an at&t store now, or something) that also tripped Knox to = 1 (yes I had oem unlocked).
So at this point I will try anything.......Goin to try king root 4.8.2!
Thanks
rredlin said:
Thanks my friend, you really do help, not only me but a lot of ppl!
I just did all 4 anyways....
Tried king root 4.8.0 and it put a different kind of warring on screen (blue screen over entire tab that read unauthorized software install, go to an at&t store now, or something) that also tripped Knox to = 1 (yes I had oem unlocked).
So at this point I will try anything.......Goin to try king root 4.8.2!
Thanks
Click to expand...
Click to collapse
well. I give up! for now......locked again. same as last time
rredlin said:
so with 44 views and no answers , I'm assuming there's no firmware for at&t?
those bastards!
Click to expand...
Click to collapse
ikr im stuck over here
which one is the modem
---------- Post added at 03:55 PM ---------- Previous post was at 03:54 PM ----------
ashyx said:
You need to flash all of them in the appropriate slots, but you probably can get away with just the modem. That should get your signal back.
Enable OEM unlock before rooting with Kingroot again.
You can't install twrp or supersu as you still have a locked bootloader.
Click to expand...
Click to collapse
which one is the modem
Man this worked great for me
Sent from my LGLS991 using XDA Free mobile app
Updating to Marshmallow FAILS... dm-verity verification failed... need to check drk
ashyx said:
Thank @envirocy for this. SM-T817OH1 firmware.
https://drive.google.com/file/d/0B1DaPxlq4YoQUXQ0NG5xVUpKUm8/view?usp=sharing
Click to expand...
Click to collapse
I sent my tablet to Samsung Repair a few weeks ago (they replaced the battery and LCD due to overheating /freezing up), and just got it back today in the mail. It had Android Marshmallow 6.0 on it when I sent it to them, when I got it back today it has Lollipop 5.1. I tried to update through system update, and when it restarted to flash the update, it failed.
So I tried to reset it back to stock in the Backup/Reset option in settings and when it restarted to reset to Factory, I got this message :
"dm-verity verification failed...
need to check drk"
So I flashed this stock ROM you provided here, hoping a clean slate would fix the problem, and it flashed perfectly in ODIN. Then I tried to update to Marshmallow again, and after it downloaded and restarted to update it said "FAILED"
I have no idea how to update now.
How in the world does Samsung repair then send back a tablet that can't update!
Can you please help in any way?
I really don't want to send my tablet back for a third time and wait 2-3 more weeks, especially after the Samsung Note 7 recall, probably take months to get back. My wife is still waiting for her Note 5 screen to be replaced and they have had her phone almost a month now.
xdaDemiGod said:
I sent my tablet to Samsung Repair a few weeks ago (they replaced the battery and LCD due to overheating /freezing up), and just got it back today in the mail. It had Android Marshmallow 6.0 on it when I sent it to them, when I got it back today it has Lollipop 5.1. I tried to update through system update, and when it restarted to flash the update, it failed.
So I tried to reset it back to stock in the Backup/Reset option in settings and when it restarted to reset to Factory, I got this message :
"dm-verity verification failed...
need to check drk"
So I flashed this stock ROM you provided here, hoping a clean slate would fix the problem, and it flashed perfectly in ODIN. Then I tried to update to Marshmallow again, and after it downloaded and restarted to update it said "FAILED"
I have no idea how to update now.
How in the world does Samsung repair then send back a tablet that can't update!
Can you please help in any way?
I really don't want to send my tablet back for a third time and wait 2-3 more weeks, especially after the Samsung Note 7 recall, probably take months to get back. My wife is still waiting for her Note 5 screen to be replaced and they have had her phone almost a month now.
Click to expand...
Click to collapse
Try Device Recovery with Kies. That's how I upgraded to Marshmallow.
hello,
sorry for upping this offtopic.. but i have sm-t817a at&t carrier tablet, and how can i change official firmware to custom. i can't find any information about this in web... please help me
Same problem kinda
serik1986 said:
hello,
sorry for upping this offtopic.. but i have sm-t817a at&t carrier tablet, and how can i change official firmware to custom. i can't find any information about this in web... please help me
Click to expand...
Click to collapse
Hello, I own samsung galaxy tab s2 SM-T817A baseband version
T817AUCU1AOH2
The problem is that it is stuck on lollipop and i think i need to insert att sim to get update but the problem is that i live in Pakistan i have tried many times to update it but nothing works for me.i have galaxy tab a t550 as well and it runs nougat.i need to get the 7.0 firmware for my tab s2 so i can flash it i cannot find the firmware anywhere else please help me to upgrade my tab s2 to nougat
AT&T Galaxy Tab S2 SM T-817A Nougat firmware T817AUCU2CQE3 here:
http://combinefile.com/home/browse/category/id/9448/T817AUCU2CQE3
colins said:
AT&T Galaxy Tab S2 SM T-817A Nougat firmware T817AUCU2CQE3 here:
http://combinefile.com/home/browse/category/id/9448/T817AUCU2CQE3
Click to expand...
Click to collapse
thx,i update my s2,it's free download.
This worked for me as well; was able to go straight from 5.1.1 (OH2) to 7.0 (QE2) via the link above and Odin 3.12.7. Didn't need to flash any intermediate versions.
houtaobbs said:
thx,i update my s2,it's free download.
Click to expand...
Click to collapse
Please upload to gdrive, link not work.
Thanks.
Alexander Kalinin said:
Please upload to gdrive, link not work.
Thanks.
Click to expand...
Click to collapse
Try this
https://firmware.gem-flash.com/index.php?a=browse&b=file-info&id=28744
It's the same firmware as Colins'
Ok so, I kinda effed up. Originally my Play Store among other google services had been acting up and were unusable so I was troubleshooting for a fix. I tried everything except a factory reset, so of course I do that , but as I was reseting I also lost my root. It had been awhile since I rooted my phone so I followed the steps of the video I was watching. (How to Root Galaxy Note 5 on Android 6.0/6.0.1 Marshmallow!) He happens to reformat his phone in the video so I did as well, brainfarting on the fact that I would lose my backups. I start tinkering with stuff because after factory reset in the ROM I still have no access to any of the Google services. I deleted System and was gonna re-flash/use my backups (that I thought I had) to fix everything. Well, I tried downloading the stock firmware for my model but it's not flashable via Odin as it's in ZIP form, and when I attempt unzipping I get an error, tried firmware from multiple mirrors. So I tried running a custom ROM since there is a lot more support on that now. I tried the Nemesis_V3_N7-port first, it flashed succesfully, tried booting for a solid 30 minutes or so before I shut it down and tried a different rom. I think it was then or after I flashed the latest MOAR that I started bootlooping into TWRP.
Please help!! I can normally figure this stuff out once I break it, but I've been fixing this phone for the past 12 hours and have yet to find a solution.
So you wiped your phone and have no rom? so you can either bootloop, go into twrp or go into dl mode? Right?
SpencerA99 said:
So you wiped your phone and have no rom? so you can either bootloop, go into twrp or go into dl mode? Right?
Click to expand...
Click to collapse
Well I bootloop INTO recovery mode. It says the Seandroid Enforcing in the top left corner. I was previously rooted and it had always said that but I never experienced any issues with it
Delerios said:
Ya. Ik it's a soft brick since I still have recovery options but I din't know where to go from here
Click to expand...
Click to collapse
you need to download the .tar file for your n920p. Then in odin click on ap and then click the .tar file. run and you should go back to stock. Then you can root again! Here yah go: https://devs-lab.com/how-to-unbrick-samsung-galaxy-note-5.html
In my experience you cant do anything in twrp to save you unless you made a nandroid back up or have an extra rom. Ive done this before and I had to odin the stock firmware
SpencerA99 said:
you need to download the .tar file for your n920p. Then in odin click on ap and then click the .tar file. run and you should go back to stock. Then you can root again! Here yah go: https://devs-lab.com/how-to-unbrick-samsung-galaxy-note-5.html
In my experience you cant do anything in twrp to save you unless you made a nandroid back up or have an extra rom. Ive done this before and I had to odin the stock firmware
Click to expand...
Click to collapse
I tried downloading the firmware quite a few times, it doesn't let me extract it from it's zip. I just tried 7 Zip, 9Zip, and the windows built in unzipper. Would you try downloading and extracting to tell me if you have the same issue? It comes up with an error at about 17% saying it's missing a crucial file..
Delerios said:
I tried downloading the firmware quite a few times, it doesn't let me extract it from it's zip. I just tried 7 Zip, 9Zip, and the windows built in unzipper. Would you try downloading and extracting to tell me if you have the same issue? It comes up with an error at about 17% saying it's missing a crucial file..
Click to expand...
Click to collapse
will do. ill update you when its done downloading, says about 20 mins...
SpencerA99 said:
will do. ill update you when its done downloading, says about 20 mins...
Click to expand...
Click to collapse
Thank you Spencer, really appreciate the help. I've tried a couple other links across other similar firmware flashing forums to no avail. So if you have a problem too, it's gotta be a batch of incomplete files.
Delerios said:
Thank you Spencer, really appreciate the help. I've tried a couple other links across other similar firmware flashing forums to no avail. So if you have a problem too, it's gotta be a batch of incomplete files.
Click to expand...
Click to collapse
it worked for me using winwar to extract from the website i linked above
SpencerA99 said:
it worked for me using winwar to extract from the website i linked above
Click to expand...
Click to collapse
okey dokey, I'm re-downloading and going to attempt with Winrar will come back to update in 30ish if it works.
I was so hyped, I thought it was gonna work. It got to 99% and then said:
C:\Users\Delerios\Downloads\N920PVPU2BPC3_N920PSPT2BPC3_SPR.zip: Checksum error in C:\Users\Delerios\AppData\Local\Temp\Rar$DIa0.337\N920PVPU2BPC3_N920PSPT2BPC3_N920PVPU2BPC3_HOME.tar.md5. The file is corrupt
C:\Users\Delerios\Downloads\N920PVPU2BPC3_N920PSPT2BPC3_SPR.zip: The archive is corrupt
So I think I'm gonna try and find yet another page to download from. Did you download the version for N920P, or for the N920T you have?
Delerios said:
I was so hyped, I thought it was gonna work. It got to 99% and then said:
C:\Users\Delerios\Downloads\N920PVPU2BPC3_N920PSPT2BPC3_SPR.zip: Checksum error in C:\Users\Delerios\AppData\Local\Temp\Rar$DIa0.337\N920PVPU2BPC3_N920PSPT2BPC3_N920PVPU2BPC3_HOME.tar.md5. The file is corrupt
C:\Users\Delerios\Downloads\N920PVPU2BPC3_N920PSPT2BPC3_SPR.zip: The archive is corrupt
So I think I'm gonna try and find yet another page to download from. Did you download the version for N920P, or for the N920T you have?
Click to expand...
Click to collapse
I downloaded the n920p version to test for you. Ill upload the .tar file for you.. itll probably take a while
SpencerA99 said:
I downloaded the n920p version to test for you. Ill upload the .tar file for you.. itll probably take a while
Click to expand...
Click to collapse
That would be insane man, TY!! I've been hitting every forum I could looking for a download that worked for me. I wonder why I can't access it, I'm using Chrome/Windows 10. I was abouta to go see if it worked on my old laptop but I figured it was a long shot.
Delerios said:
That would be insane man, TY!! I've been hitting every forum I could looking for a download that worked for me. I wonder why I can't access it, I'm using Chrome/Windows 10. I was abouta to go see if it worked on my old laptop but I figured it was a long shot.
Click to expand...
Click to collapse
All you really need to do is re flash your twrp so it will re root the phone again! After you flash twrp you can easily use adb to push the files back to your phone. This is all I did to a phone I repaired.. You can even use fastboot flash Your920PFirmware.tar..
Here yah go: https://drive.google.com/open?id=0B7o0BZcV7Ra3cl9hekk1VHJ3c1k
I tried to upload it on xda but that just didnt work lol
SpencerA99 said:
Here yah go: https://drive.google.com/open?id=0B7o0BZcV7Ra3cl9hekk1VHJ3c1k
I tried to upload it on xda but that just didnt work lol
Click to expand...
Click to collapse
Hey, thank you man. I'm downloading right now, I'll let ya know when I get it working.
SpencerA99 said:
Here yah go: https://drive.google.com/open?id=0B7o0BZcV7Ra3cl9hekk1VHJ3c1k
I tried to upload it on xda but that just didnt work lol
Click to expand...
Click to collapse
One thing after another... So I attempted flashing and I got the "Pit for mapping" error. I looked up my Pit file and put it into odin but I'm still getting the problem. Tried wiping the Cache and Dalvik + Factory Reset but nada. Any ideas?
Delerios said:
One thing after another... So I attempted flashing and I got the "Pit for mapping" error. I looked up my Pit file and put it into odin but I'm still getting the problem. Tried wiping the Cache and Dalvik + Factory Reset but nada. Any ideas?
Click to expand...
Click to collapse
No clue man. That's way past me
SpencerA99 said:
No clue man. That's way past me
Click to expand...
Click to collapse
Dang. Hey man appreciate all your help, thank you for the file. I'll post the solution when I figure all this out in case there's another poor soul in the same boat
I FIXED IT. It was my computer, I don't know what it was and I don't care lol. But I tried the correct firmware through Odin on my other Windows PC and it worked flawlessly. If anybody runs into any issues unzipping or flashing through Odin, last resort just clean install on the pc or find another one.
Full ODIN stock ATT files.
Download one file, unzip to 4 files and unzip this 4 files to md5 format. Put in ODIN and flash.
I'm not responsible to what happens to your phone if you flash this files. Flash in this files it is your and only your responsibility.
AP_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship_meta.tar.rar
BL_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CP_G925AUCU6EQCF_CP6075908_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CSC_ATT_G925AATT6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
DOWNLOAD HERE - Status : Live
Link is up
that will solve lot of issues and answer lot of questions, thank you.
I wish I had this 3h ago.
vendo said:
that will solve lot of issues and answer lot of questions, thank you.
I wish I had this 3h ago.
Click to expand...
Click to collapse
It just pop up on servers some 30 min ago
Help.........!!!
Can jump from version G925AUCS5DPK5 to this version ? when flash is stuck in odin, is there any way to do it, stays in file analysis for a long time but does not load, any idea how to fix it?:crying:
Here's everything I've tried
1) Change USB port
2) Administrator mode
4) Rebooted phone
5) rebooted computer
...... any other idea ?
Does this require a phone to be on a specific version before flashing? Just want to be sure everything is good to go before moving forward.
**Edit** found answer by searching. (sorry to jump post heheh
ivan.evg said:
Can jump from version G925AUCS5DPK5 to this version ? when flash is stuck in odin, is there any way to do it, stays in file analysis for a long time but does not load, any idea how to fix it?:crying:
Here's everything I've tried
1) Change USB port
2) Administrator mode
4) Rebooted phone
5) rebooted computer
...... any other idea ?
Click to expand...
Click to collapse
Did you unzip all 4 files all the way to md5 ?
norbarb did it again!
norbarb said:
Full ODIN stock ATT files.
Download one file, unzip to 4 files and unzip this 4 files to md5 format. Put in ODIN and flash.
I'm not responsible to what happens to your phone if you flash this files. Flash in this files it is your and only your responsibility.
AP_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship_meta.tar.rar
BL_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CP_G925AUCU6EQCF_CP6075908_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CSC_ATT_G925AATT6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
DOWNLOAD HERE - Status : Live
Click to expand...
Click to collapse
Thanks for another great post, norbarb!, your contributions are highly appreciated!
New update QE1
New update "925AUCS6EQE1" with May security patch is on the way...
ivan.evg said:
Can jump from version G925AUCS5DPK5 to this version ? when flash is stuck in odin, is there any way to do it, stays in file analysis for a long time but does not load, any idea how to fix it?:crying:
Here's everything I've tried
1) Change USB port
2) Administrator mode
4) Rebooted phone
5) rebooted computer
...... any other idea ?
Click to expand...
Click to collapse
Now it´s working, I unzip all 4 files to md5, and then load the ROM successfully, but it stuck on black screen for about 30 min and never started, I had to go down to the previous version now with imei corrupt and now my cell phone no longer has signal, I do not know what went wrong or where I was wrong?
I flash this files in my g925aucu4dph5 phone, I will upgrade to nougat? What about ADB files? Do you have a video tutorial to this process?
just received my g925a 128GB version, currently has the build number LMY47X.G925AUCU3BOJ7, can i use Odin 3.10.6 and just flash this on it after zipping all 4 files down to md5? (bl, ap, cp, csc)??/
I'mgoing to assume it will not b rootabe after this? If so, to what firmware can i. should i update to so that I may root as flash some other ROM? What I really want to accomplish is just rid myself of all the AT&T bloat, as I do not use AT&T.......and would like to be a more newer version of android then 5.1.1
excuse of it seems nubish, but been using OnePlus One for 3 years now, and stumbled upon getting this phone on a great deal on getting this phone for $240.....so new to the samsung scene, but not to the rooting/bootloading unlocking flashing scene....
Also saw that another poster lost his storage flashing odin....something not cool on a 128gb device and another lost his imei....not cool either
Thanks for the update! Worked beautifully. Now waiting for may update.
Once you load these are we supposed to get updates from ATT? I ask b/c when I hit update it never finds anything and I don't have the most current OS I have the previous to current using these methods to update
has anybody done this without losing original storage or imei??? have a 128GB att edge and would not want this error to occur on mine...still in 5.1.1 build OJ7....
localization of 7.0 AT&T
Hi guys. Sorry for possible offtopic, but I have a guestion for people who upgraded to Android 7 on this device:
Is there any changes in localizations list? Can this phone switch to russian language?
ty
ropotun said:
Hi guys. Sorry for possible offtopic, but I have a guestion for people who upgraded to Android 7 on this device:
Is there any changes in localizations list? Can this phone switch to russian language?
ty
Click to expand...
Click to collapse
Yes you can
On Edge of Galaxy
Once you use these methods must I always? Rather then getting the it's update - my phone doesn't get current version and says I'm up to date .I'm on QCF.
36dbldz said:
Once you use these methods must I always? Rather then getting the it's update - my phone doesn't get current version and says I'm up to date .I'm on QCF.
Click to expand...
Click to collapse
Are you on AT&T network and using at&t sim card, are you in USA?
On Edge of Galaxy
norbarb said:
Are you on AT&T network and using at&t sim card, are you in USA?
On Edge of Galaxy
Click to expand...
Click to collapse
Do we need to be on a certain version before flashing this w/odin?
Sent from my SAMSUNG-SM-G925A using XDA-Developers Legacy app