Database Develop

[Q] Flashing GingerBread 2.3.3 DXJPE Firmware

Hey. i got a question to ask. i saw some of the videos trying to flash europe gingerbread 2.3.3 firmwares using the dbdata.tar
is there any dbdata.tar since i downloaded the P1000DXJPE asian firmware for galaxytab from samfirmware and theres not dbdata.tar inside the file.

and i have a question. why does my pda and csc is empty when i flash P1000DXJPE?

Roszaidee said:
Hey. i got a question to ask. i saw some of the videos trying to flash europe gingerbread 2.3.3 firmwares using the dbdata.tar
is there any dbdata.tar since i downloaded the P1000DXJPE asian firmware for galaxytab from samfirmware and theres not dbdata.tar inside the file.
Click to expand...
Click to collapse
The file from samfirmware is defective. You are better off updating thru kies.
Download DXJK2 from here then connect to kies and update....
good luck!

Ironically, I just flashed mine with the one found on samfirmware.com as I needed to send my unit back to Samsung for RMA on the battery, (battery kept on shutting down for no reason) and it worked just fine. Phone, CSC was all there. They gave it the once over and actually "reformatted" it for me, just to diagnose in case it wasn't a software issue. Lo and behold, it shut down on them right after the "reformatting" and confirmed my issues for them!
Just follow the restocking part of the guide found on Teamovercome.net, but instead of using the standard JQ1.tar file we provided, just use the tar file that came from samfirmware and you should be alright. That's what I did anyway, and it was all fine.
Just remember to do change the CSC from the Korean one to your appropriate market's CSC. The Malaysian CSC was XME.

Roszaidee said:
and i have a question. why does my pda and csc is empty when i flash P1000DXJPE?
Click to expand...
Click to collapse
If i remember correctly, after flashing the firmware, go to recovery mode, it will do some initialisation and once it's done, you do a reboot, you should see the pda & csc..

bongski55 said:
The file from samfirmware is defective. You are better off updating thru kies.
Download DXJK2 from here then connect to kies and update....
good luck!
Click to expand...
Click to collapse
tried flashing DXJK2 but it keeps on rebooting at samsung logo.

OK, just for fun, I flash back to stock DXJPE from Overcome Jupiter.
The DXJPE firmware is the same from samfirmware.
Using Odin, put pit file 'gt-p1000_mr.pit', put PDA file the downloaded tar file and start flashing.
Upon flash successfully complete, the tab is observed to be stuck in Download mode.
Power off the tab, then enter recovery mode (power button, volume up button)
Once on recovery, will see runs of red text. Dont worry
From recovery perform clear cache, factory reset.
Reboot tab.
Tab should boot up to the familiar language setup screens.
Dial *#272*<imei no>#* to change to your desired CSC.

cymagnus said:
OK, just for fun, I flash back to stock DXJPE from Overcome Jupiter.
The DXJPE firmware is the same from samfirmware.
Using Odin, put pit file 'gt-p1000_mr.pit', put PDA file the downloaded tar file and start flashing.
Upon flash successfully complete, the tab is observed to be stuck in Download mode.
Power off the tab, then enter recovery mode (power button, volume up button)
Once on recovery, will see runs of red text. Dont worry
From recovery perform clear cache, factory reset.
Reboot tab.
Tab should boot up to the familiar language setup screens.
Dial *#272*<imei no>#* to change to your desired CSC.
Click to expand...
Click to collapse
Thanks alot! It works
Sent from my GT-P1000 using XDA Premium App

Can someone upload the P1000DXJPE rom from samfirmware.com ? Its too slow, impossible to download the firmware from hotfile.com

What link do you prefer?
Sent from my GT-P1000 using XDA Premium App

Roszaidee said:
What link do you prefer?
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
Which ever which is fast and reliable... such as
..filesonic..sg
..megaupload..com
..mediafire..com
Thanks man.

Here's the link mate
http://www.megaupload.com/?d=Y8ECEBGL

Roszaidee said:
Here's the link mate
http://www.megaupload.com/?d=Y8ECEBGL
Click to expand...
Click to collapse
Thanks man. The download is fantastic at 450KB/s.
Download completed.

can you show the PDA, PHONE,CSA files in the samfirmware downloaded file...
i have extract thr file , but i cannot see .tar fie there
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pls help me

ameerali19 said:
can you show the PDA, PHONE,CSA files in the samfirmware downloaded file...
i have extract thr file , but i cannot see .tar fie there
pls help me
Click to expand...
Click to collapse
thanks friends
i got the file from http://hotfile.com/dl/120112727/77ed932/P1000DXJPC_OLBJPC_DXJPC.rar.html

Odin hangs flashing factoryfs.img [while downgrading from ICS leak)

Hello everyone
I hope one of you might be able to help. I wanted to downgrade my Note to stock GB because I lost root on an ICS leak. I have done this successfully before but today pc odin suddenly hangs in the middle of flashing the factoryfs.img of a stock kernel (I used this one but tried others as well: N7000XXKJ4_N7000VD2KJ1_N7000XXKJ4_HOME.tar.md5).
Because of this I can now only boot the phone into download mode. I have also tried to use a pit file (as you can see in the screenshot, where I used this file: Q1_20110914_16GB.pit), because I thought the partitions might have been corrupted or changed by the ICS ROM but this didn't help either.
Do you have experienced this before? What else could I try?
Thanks a lot for any help
suxi
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

+1 same issue here

your Re-Partition is on.
you phone is dead.

avetny said:
your Re-Partition is on.
you phone is dead.
Click to expand...
Click to collapse
OMG what's happening today, people's Notes are dying in droves!!!

razorhanny said:
OMG what's happening today, people's Notes are dying in droves!!!
Click to expand...
Click to collapse
yes it sad, people need to carefully read the instructions

suxi said:
Oops, sorry for posting this in the wrong section. Mods, please delete! Thanks.
Hello everyone
I hope one of you might be able to help. I wanted to downgrade my Note to stock GB because I lost root on an ICS leak. I have done this successfully before but today pc odin suddenly hangs in the middle of flashing the factoryfs.img of a stock kernel (I used this one but tried others as well: N7000XXKJ4_N7000VD2KJ1_N7000XXKJ4_HOME.tar.md5).
Because of this I can now only boot the phone into download mode. I have also tried to use a pit file (as you can see in the screenshot, where I used this file: Q1_20110914_16GB.pit), because I thought the partitions might have been corrupted or changed by the ICS ROM but this didn't help either.
Do you have experienced this before? What else could I try?
Thanks a lot for any help
suxi
Click to expand...
Click to collapse
Reset computer
endprogess kies (kiesELDR and kiestray..) in task manager.
Reoot again downloader
open odin
reconnec phone via usb port (in main ).
and reflash.
googluck.

Why dont people make backups before flashing new roms
Takez 5-6min in CWM to make a backup of your current rom
If any thing goes wrong or you just want to go back to the old rom you just run the restore and you are back up and running in under 10min

Shouldnt have needed Odin to downgrade, if ya created a firmware folder on ya sd and followed ketans cwm guide to flash bk to rooted stock ya wouldt have an issue.
As for odin you flashed wrong, previous comments are right, your re-partition shouldnt have been on if you were flashing the all in one firmware thru pda, and you certainly shouldnt have been using the pit file to do that.
Hope you sorted the issue out, seriously, its risky business, the guides here on xda are perfect working guides, make sure you read them thoroughly and familiarize yourself with what your doing beforehand.
Also noted your using odin 1.85, i had issues with this, i reverted to odin 1.83 and have never had a problem since, give it a try, but if ya can enter download mode then ya shouldnt have an issue, i would reccomend downloading firmware KL8, set the pit file, re-partition and the other 2 leave ticked, set modem, code and multi csc, and flash and dont touch it till its finished and reboots, after that ya can then go and do whatever, but this should work, i downgraded from ics to kl8 no problem with odin 1.83.

Relax fellas! Your Notes are not committing mass suicides... just yet. Use the pit file attached below to flash your favorite (rootable) stock Gingerbread ROM. Just hit the "PIT" button in ODIN and select the pit file. And ALSO the PDA field should also be selected. Just use one of the guides. You need to extract the rar to get the pit file. I hope this helps.
Edit. When you select the PIT file, the repartition box will check itself, don't uncheck it.

acidburn89 said:
Relax fellas! Your Notes are not committing mass suicides... just yet. Use the pit file attached below to flash your favorite (rootable) stock Gingerbread ROM. Just hit the "PIT" button in ODIN and select the pit file. And ALSO the PDA field should also be selected. Just use one of the guides. You need to extract the rar to get the pit file. I hope this helps.
Edit. When you select the PIT file, the repartition box will check itself, don't uncheck it.
Click to expand...
Click to collapse
I Tried your PIT file. Does it really take long to SET PARTITION?

same issues here. anyone can confirm that the PIT file is working?

Good morning and thanks a lot for your help!
your Re-Partition is on.
Click to expand...
Click to collapse
Only as a last resort. As I wrote, before I tried flashing several ROMS without PIT files and got stuck the exact same way.
yes it sad, people need to carefully read the instructions
Click to expand...
Click to collapse
My words and I followed exact instructions from a different post.
Reset computer
endprogess kies (kiesELDR and kiestray..) in task manager.
Reoot again downloader
open odin
reconnec phone via usb port (in main ).
and reflash.
Click to expand...
Click to collapse
I tried this several times with no success.
Why dont people make backups before flashing new roms
... If any thing goes wrong or you just want to go back to the old rom you just run the restore and you are back up and running in under 10min
Click to expand...
Click to collapse
I do, but unfortunately instructions from a different thread advised to do it "the odin way".
Shouldnt have needed Odin to downgrade ...
Click to expand...
Click to collapse
graemeg, yes, probably, but those instructions ...
i reverted to odin 1.83 and have never had a problem since,
Click to expand...
Click to collapse
I'll do that, too. Thanks.
i would reccomend downloading firmware KL8
Click to expand...
Click to collapse
I did this with LA1, it also includes the different files.
Use the pit file attached below
Click to expand...
Click to collapse
Thank you for the link. That's the exact file I used before.
Any other ideas?
Thanks for your help
suxi

Had the same problem.
Have managed to get CWM back - but I have made no back-ups to restore. Stupid me.

cemstro said:
Had the same problem.
Have managed to get CWM back - but I have made no back-ups to restore. Stupid me.
Click to expand...
Click to collapse
how did you get cwm back??

ArchaosAngel said:
how did you get cwm back??
Click to expand...
Click to collapse
By flashing CF-Root kernel through ODIN.

cemstro said:
By flashing CF-Root kernel through ODIN.
Click to expand...
Click to collapse
are u able to flash a rom and get it to work?

ArchaosAngel said:
are u able to flash a rom and get it to work?
Click to expand...
Click to collapse
Tried flashing multpile ROM's (GB and ICS), but even when they do succesfully finish I get stuck when booting at the "Samsung Galaxy Note" screen - with a nice yellow triangle.
So I'm done with it for now. Not trying anything new, until the guys in the Dev section find a way to fix it.

suxi said:
I do, but unfortunately instructions from a different thread advised to do it "the odin way".
Click to expand...
Click to collapse
I am one of those who flashed TRR 1.6 with the angelom 1.2 kernel,
and while it didn't, luckily enough, brick my phone, it caused all sorts
of weird stuff, like gmail crashing etc.
I then flashed, as advised in the TRR thread, abyssnote 3.9, plus restored
a RR v22 backup, I'm back just fine now.

armic said:
I Tried your PIT file. Does it really take long to SET PARTITION?
Click to expand...
Click to collapse
Take Seconds..... been there done that.....

MrIT said:
Reset computer
endprogess kies (kiesELDR and kiestray..) in task manager.
Reoot again downloader
open odin
reconnec phone via usb port (in main ).
and reflash.
googluck.
Click to expand...
Click to collapse
Hi
I did not run it the way you train is the factoryfs stops
My mobile partition is unmount
Help me

[HELP PLEASE] Bricked My Note, After Reverting from ICS to GINGERBREAD

getting continoous FORCE CLOSE
Installed SIngapore ROM, below is the logs
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
N7000DXKL3_N7000OLBKL2_N7000DXKL2_HOME.TAR.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
cache.img
NAND Write Start!!
factoryfs.img
hidden.img
modem.bin
zImage
RQT_CLOSE !!
RES OK !!
Completed..
All threads completed. (succeed 1 / failed 0)
Removed!!
Added!!
Removed!!
Added!!
sent from seXperia S

Strange. flashing by PC odin or Mobile Odin?

Delete

have you done a full wipe in recovery ?

Guys,
I followed this THREAD: http://forum.xda-developers.com/showthread.php?t=1424997
"Extract tar file from the ROM(remember to extract it till tar, dont go deep). Put the phone into download mode (vol. down+home+power buttons),
Start odin, then only connect the phone via USB. Choose continue on the phone, Now ID:COM box shud turn yellow (see Image)
Make sure that only two boxes are checked in odin - Auto Reboot and F.Reset Time.(See Image)
- If your downloaded ROM contains single file
Choose PDA button in Odin and select tar file you extracted before"
I followed the instructions properly and didn't got any error during flashing, after flashing screen comes up but nothing is working !!!
DOES CHOICE of GINGERBREAD ROM Matters???

Note users, any suggestion..m not expert with Samsungs, the phone belongs to my wife, she will kill me !!!
sent from seXperia S

it shouldnt matter which GB firmware you download, However the above procedure was for a firmware of 1.tar file, Was yours also a 1 file firmware or a 3 file firmware (PDA, Phone, CSC)

azzledazzle said:
it shouldnt matter which GB firmware you download, However the above procedure was for a firmware of 1.tar file, Was yours also a 1 file firmware or a 3 file firmware (PDA, Phone, CSC)
Click to expand...
Click to collapse
Sorry but how I can chk, i have this old screenshot, this I have taken before ICS...
Does it mean 3?
If Yes, what shud I do now???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sent from seXperia S

xperiax10.awesome said:
Note users, any suggestion..m not expert with Samsungs, the phone belongs to my wife, she will kill me !!!
sent from seXperia S
Click to expand...
Click to collapse
you can use the XXLB1 stock GB Firmware wich is non wipe 1 tar file....make sure that after that u do a full wipe...
http://www.hotfile.com/dl/148012331/87f5985/N7000XXLB1_N7000OXXLB1_XEO.zip.html
Extracted from the guide u mentioned

Azzledazzle, Glevitan
Please confirm !!!
I am confused..
sent from seXperia S

try Glevitan's method first.
What i mean is when you flashed with ODIN, Was the firmware you flashed in 1 file or 3 files ?
If its one single file it will go into the PDA section of ODIN, If it is in 3 files it will go into different sections (PDA, Phone & CSC)
Check the firmware you flashed and tell me how many .tar files are inside it

azzledazzle said:
try Glevitan's method first.
What i mean is when you flashed with ODIN, Was the firmware you flashed in 1 file or 3 files ?
If its one single file it will go into the PDA section of ODIN, If it is in 3 files it will go into different sections (PDA, Phone & CSC)
Check the firmware you flashed and tell me how many .tar files are inside it
Click to expand...
Click to collapse
When I flashed, it has 1 file and I chose the PDA option only...
Lemme try above method !!!
sent from seXperia S

glevitan said:
you can use the XXLB1 stock GB Firmware wich is non wipe 1 tar file....make sure that after that u do a full wipe...
http://www.hotfile.com/dl/148012331/87f5985/N7000XXLB1_N7000OXXLB1_XEO.zip.html
Extracted from the guide u mentioned
Click to expand...
Click to collapse
M downloading this, just lemme know wat do u mean by full wipe, which option in Odin?
sent from seXperia S

no option in ODIN, Do a full wipe in recovery, ONLY IF YOU ARE ON GINGERBREAD.
to get into recovery, power off the phone or remove and reinsert the battery, Hold volume UP button + Home button + Power button all at the same time, use the volume keys to navigate to wipe data / factory reset and power button to select.

azzledazzle said:
no option in ODIN, Do a full wipe in recovery, ONLY IF YOU ARE ON GINGERBREAD.
to get into recovery, power off the phone or remove and reinsert the battery, Hold volume UP button + Home button + Power button all at the same time, use the volume keys to navigate to wipe data / factory reset and power button to select.
Click to expand...
Click to collapse
I just RESET the phone through SETTINGS options and now its working fine
sent from seXperia S

xperiax10.awesome said:
I just RESET the phone through SETTINGS options and now its working fine
sent from seXperia S
Click to expand...
Click to collapse
Great...remember that u can do that only running GB....

Thankyou guys..
Any of you guys tried PHANDROID ROM? Should I try! !
Sent from my GT-N7000 using xda premium

Nope I havent, Only PA, However, Now you know the steps, try them all out and see which ones you like
Just be careful and dont skip any steps

FRP LOCK ON Can't ODIN firmware... Lord help me.

Canadian NOTE5 here, I forgot to unclick the OEM Lock in the developer options and now I cannot boot up, I cannot flash ODIN stock firmware from Canada, although only Puerto Rico seems to exist for SM-N920W8 etc... I get the error HIDDEN.IMG then FAIL
I cannot flash TWRP because I get BLOCKED BY FRP LOCK.
Smart Switch does not support my device. So that doesn't work either.
I have tried ODIN TMOBILE firmware, that fails right away.
I have had 10 different rooted devices without a hitch, is this my first brick ever?
Do I have to wait for different firmware?
Anyone? Happy to buy anyone a beer or two who can assist me!
Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Model Number: N920W8
Please wait..
Checking MD5 finished Sucessfully..
Leave CS..
Odin engine v(ID:3.1100)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sboot.bin
NAND Write Start!!
cm.bin
boot.img
recovery.img
system.img
cache.img
hidden.img
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)

I guess your best bet is to wait for official Bell firmware. But it's strange that I never came across that. Did you read the instructions on getting the phone rooted? Did you enable the OEM unlock?

Did you try Samsung Kies software.
Sometimes it can restore phone to original.

LouK said:
Did you try Samsung Kies software.
Sometimes it can restore phone to original.
Click to expand...
Click to collapse
jqmalang said:
I guess your best bet is to wait for official Bell firmware. But it's strange that I never came across that. Did you read the instructions on getting the phone rooted? Did you enable the OEM unlock?
Click to expand...
Click to collapse
Solved! I reflashed the firmware and flashed the hidden.img separately in Odin and success!
Sent from my Gorgeous Note5

Brava27 said:
Solved! I reflashed the firmware and flashed the hidden.img separately in Odin and success!
Sent from my Gorgeous Note5
Click to expand...
Click to collapse
how please??

edwardob said:
how please??
Click to expand...
Click to collapse
You need to flash firmware from your provider.

Brava27 said:
You need to flash firmware from your provider.
Click to expand...
Click to collapse
how to flash
" I reflashed the firmware and flashed the hidden.img separately in Odin"
do you remove hidden .img from firmware..
how did you do it please??

edwardob said:
how to flash
" I reflashed the firmware and flashed the hidden.img separately in Odin"
do you remove hidden .img from firmware..
how did you do it please??
Click to expand...
Click to collapse
Why do you want to remove hidden.img? You only have to do this if you get an error message fail hidden.img

Brava27 said:
Why do you want to remove hidden.img? You only have to do this if you get an error message fail hidden.img
Click to expand...
Click to collapse
thats right/........so how do you do it?

heres mine
similiar problem different file
anyone any ideas?

my mobile phone, same as you,how can i do? i am using note 5 n9200,what i need to download? 1,odin,and other?can you tell me the step,thank you very much

same here SM-N920W8
Please theres a step by step guide to flash tru odin ,say solved but no how to thanks

pls help us i have the same on my note 5 N9200 and i tryd evrythink so if its working to you you have me some hoop that i dont loose 800 dollar on my note 5

Ekinz1219 said:
my mobile phone, same as you,how can i do? i am using note 5 n9200,what i need to download? 1,odin,and other?can you tell me the step,thank you very much
Click to expand...
Click to collapse
did u solve the problem? i have the same device as you do, and i have the same situation.
After tried almost every Stock Rom, i still get stuck after boot.img.

This problem is because you forgot to unlock bootloader from developper options.
Reflash the official latest stock firmware with odin, then unlock the bootloader and reflash what ever you want after.

edwardob said:
similiar problem different file
anyone any ideas?
Click to expand...
Click to collapse
Ekinz1219 said:
my mobile phone, same as you,how can i do? i am using note 5 n9200,what i need to download? 1,odin,and other?can you tell me the step,thank you very much
Click to expand...
Click to collapse
TIAR2018 said:
Please theres a step by step guide to flash tru odin ,say solved but no how to thanks
Click to expand...
Click to collapse
andixxqaz said:
pls help us i have the same on my note 5 N9200 and i tryd evrythink so if its working to you you have me some hoop that i dont loose 800 dollar on my note 5
Click to expand...
Click to collapse
danielweng said:
did u solve the problem? i have the same device as you do, and i have the same situation.
After tried almost every Stock Rom, i still get stuck after boot.img.
Click to expand...
Click to collapse
Download the latest stock firmware for your device model, and extract from it the file called hidden.img, rename that file as hidden.img.tar Now open Odin and try to install the firmware you downloaded, when you see the error in Odin, load the file hidden.img.tar on AP and flash it. Now turn on the phone and wait around 5 minutes, it should boot up.
Please note that this will only work if the error shown in Odin is:
hidden.img
FAIL!

Brava27 said:
Solved! I reflashed the firmware and flashed the hidden.img separately in Odin and success!
Sent from my Gorgeous Note5
Click to expand...
Click to collapse
Hi, I had the same issue I tried rooting my note 5 and it failed and now i'm stuck
i'm really freaking out I paid a lot of money for it,
odin says " NAND write failed"
can you please help me ?!

m7mdas3d said:
Hi, I had the same issue I tried rooting my note 5 and it failed and now i'm stuck
i'm really freaking out I paid a lot of money for it,
odin says " NAND write failed"
can you please help me ?!
Click to expand...
Click to collapse
You need the correct firmware for your device from sammobile.com

Brava27 said:
You need the correct firmware for your device from sammobile.com
Click to expand...
Click to collapse
I have the exact one, I have downloaded it before rooting in case something wrong happened, which did :crying: !!!
still fails at the NAND write

m7mdas3d said:
I have the exact one, I have downloaded it before rooting in case something wrong happened, which did :crying: !!!
still fails at the NAND write
Click to expand...
Click to collapse
You need to use the odin Odin3 v3.10.7.1

Unbrick I9000 - all old links are dead.

Hey guys, I have a problem with i9000. Its bricked (not soft) I have to use USB jig to access download mode.
In Heimdall I recevice either libusb error -12 (1.4 version), or no detection (1.3.1 on windows).
All host links for recoveries or unbricking are not not active. Can you please help me to unbrick phone and install maybe lineageos or any other android?
Thanks in advance.

Do you have USB jig, can you enter download mode? I restored mine with ezbase recovery kit to Gingerbread, then updated it with kies to 2.3.6 then flashed LineageOS 11.
.

MobileTechArena said:
Do you have USB jig, can you enter download mode? I restored mine with ezbase recovery kit to Gingerbread, then updated it with kies to 2.3.6 then flashed LineageOS 11.
.
Click to expand...
Click to collapse
Yes, I do have USB Jig and I can access download mode, but Odin and other programs are not able to connect
EDIT:
Odin usually gives:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)

ifsz said:
Yes, I do have USB Jig and I can access download mode, but Odin and other programs are not able to connect
EDIT:
Odin usually gives:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I had the same problem, then i installed Samsung Kies including all additional cable drivers it suggested to install. Then after phone was visible in Kies it was also recognized by Odin.
EDIT: This is the Kies i used..
.

MobileTechArena said:
I had the same problem, then i installed Samsung Kies including all additional cable drivers it suggested to install. Then after phone was visible in Kies it was also recognized by Odin.
EDIT: This is the i used..
.
Click to expand...
Click to collapse
Even with Kies it still gives same errors.

ifsz said:
Even with Kies it still gives same errors.
Click to expand...
Click to collapse
Does Kies sees device as I9000? Maybe try different PC, i was trying to fix that for hours but at the end Kies and its additional drivers fixed it for me..

MobileTechArena said:
Does Kies sees device as I9000? Maybe try different PC, i was trying to fix that for hours but at the end Kies and its additional drivers fixed it for me..
Click to expand...
Click to collapse
Unfortunetly - no luck, on two devices with additional drivers. Any more ideas?

ifsz said:
Unfortunetly - no luck, on two devices with additional drivers. Any more ideas?
Click to expand...
Click to collapse
Don't know, different cable, USB port or something... Uninstall all Samsung drivers, Kies and everything and reboot, then try with the Kies from my link.. But i do believe its problem with drivers.

MobileTechArena said:
Does Kies sees device as I9000? Maybe try different PC, i was trying to fix that for hours but at the end Kies and its additional drivers fixed it for me..
Click to expand...
Click to collapse
MobileTechArena said:
Don't know, different cable, USB port or something... Uninstall all Samsung drivers, Kies and everything and reboot, then try with the Kies from my link.. But i do believe its problem with drivers.
Click to expand...
Click to collapse
I've got some progress:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It seems frozen.

ifsz said:
I've got some progress:
It seems frozen.
Click to expand...
Click to collapse
Yeah, sometimes it freezes at SetupConnection.. Try few more times.

MobileTechArena said:
Yeah, sometimes it freezes at SetupConnection.. Try few more times.
Click to expand...
Click to collapse
I have tried almost 20 times, different USB cables, even different odin versions. Same.
edit: Wait, I have tried again, and now something moves. TBC
edit2: Unbricking was successful, thank you very much! I have a problem with lineageos installation, it always boots to recovery (clockwork) - installtion complete without errors.

ifsz said:
I have tried almost 20 times, different USB cables, even different odin versions. Same.
edit: Wait, I have tried again, and now something moves. TBC
Click to expand...
Click to collapse
:laugh::good:

MobileTechArena said:
:laugh::good:
Click to expand...
Click to collapse
Unbricking was successful, thank you very much! I have a problem with lineageos installation, it always boots to recovery (clockwork) - installtion complete without errors.
Edit: ok I have managed to install OS, but gapps are missing - and I cannot access recovery now, any ideas?
Edit2: I have reinstalled recovery- now is working
Thank you very much for help!

ifsz said:
Unbricking was successful, thank you very much! I have a problem with lineageos installation, it always boots to recovery (clockwork) - installtion complete without errors.
Edit: ok I have managed to install OS, but gapps are missing - and I cannot access recovery now, any ideas?
Click to expand...
Click to collapse
You should be able to boot into recovery after OS install, if not try everything again. Flash gapps zip right after flashing OS... http://opengapps.org/ (download for ARM, 4.4, nano)
---------- Post added at 08:49 PM ---------- Previous post was at 08:46 PM ----------
ifsz said:
Edit2: I have reinstalled recovery- now is working
Thank you very much for help!
Click to expand...
Click to collapse
Great, no problem. :good:

MobileTechArena said:
You should be able to boot into recovery after OS install, if not try everything again. Flash gapps zip right after flashing OS... http://opengapps.org/ (download for ARM, 4.4, nano)
---------- Post added at 08:49 PM ---------- Previous post was at 08:46 PM ----------
Great, no problem. :good:
Click to expand...
Click to collapse
I have sent you a proper thank you (paypal),