Related
Hi to everyone. I have a Samsung Tab S2 SM-T810 with Android 5.1.1 / Kernel 3.10.9 that has retail mode on, it was a demo in a store. Is there anyway to remove this from the device? I already try doing a factory reset with stock firmware and odin and it stills the same. I think it has some kind of software installed on the ROM memory that prevents it to fully restore and wipe the retail mode app. Thanks in advance.
Please do a search this has been covered plenty of times already. There is no need to repeat over.
ashyx said:
Please do a search this has been covered plenty of times already. There is no need to repeat over.
Click to expand...
Click to collapse
I did it. that's why I specified re installing with odin didnt help. I checked all the forum. even this http://forum.xda-developers.com/galaxy-tab-s/help/samsung-galaxy-tab-s-sale-version-t2890171
and it stills the same.
huntejes said:
I did it. that's why I specified re installing with odin didnt help. I checked all the forum. even this http://forum.xda-developers.com/galaxy-tab-s/help/samsung-galaxy-tab-s-sale-version-t2890171
and it stills the same.
Click to expand...
Click to collapse
It's simple, make sure OEM unlock is enabled in developer settings, Install twrp, factory reset with twrp, boot to download then flash stock Firmware.
Done.
ashyx said:
It's simple, make sure OEM unlock is enabled in developer settings, Install twrp, factory reset with twrp, boot to download then flash stock Firmware.
Done.
Click to expand...
Click to collapse
I wouldn't be asking for help if it were that easy. I tried doing that too. All the option in the developer settings tab are gray. I can't change them. The retail app is blocking it.
Any other idea ?
huntejes said:
I wouldn't be asking for help if it were that easy. I tried doing that too. All the option in the developer settings tab are gray. I can't change them. The retail app is blocking it.
Any other idea ?
Click to expand...
Click to collapse
Just go ahead and install twrp and continue with the previous instructions. If you get the FRP block, just flash the stock Firmware.
Also if you carry on with the attitude you're on your own.
ashyx said:
Just go ahead and install twrp and continue with the previous instructions. If you get the FRP block, just flash the stock Firmware.
Also if you carry on with the attitude you're on your own.
Click to expand...
Click to collapse
Excuse me, I didn't mean to offend. I'll try to install twrp right now.
As I expected while I was trying to install twrp it always return an error on Odin so I gave up, then after a couple of hours the table ran out of battery and since it was the first time it went off without the retail app monitoring. I decide to boot it into download mode. and that's it.
After that the twrp finally got installed and I erased everything on the tab. after that that it got stuck on the samsung logo. And I could install the stock firmware with no problem.
All thanks to you.
Ok so ive got the Sm-810 and i was experiencing the same issue of it not letting odin flash to stock OR install twrp etc. etc. and i was going to give up and i **** you not i was trying to get into the recovery to see if i could jostle some solution loose and it fixed itself !! It was booted into download mode and i unplugged the cable and pressed and held power+vol down and as soon as the screen went black i did the same thing again and then i mustve messed up cuz it booted into the os but i repeated the process from there and no kidding after 2 or 3 cycles of power+vol down i got a blue screen with an android on it and it flashed and showed a dead android with the caution! sign and the next screen showed the regular android with the word "erasing" underneath and vio'la no more retail mode. After this Odin worked and let me autoroot and so on an so forth. sorry for my long post i just though i should share
I think the major issue is that OEM is disabled and there is no way to turn it on. So most of the solutions are a no go... So any other suggestions on make this work?
huntejes said:
Excuse me, I didn't mean to offend. I'll try to install twrp right now.
As I expected while I was trying to install twrp it always return an error on Odin so I gave up, then after a couple of hours the table ran out of battery and since it was the first time it went off without the retail app monitoring. I decide to boot it into download mode. and that's it.
After that the twrp finally got installed and I erased everything on the tab. after that that it got stuck on the samsung logo. And I could install the stock firmware with no problem.
All thanks to you.
Click to expand...
Click to collapse
Hi huntejes,
I've a SM-T650NU unit and have the same issue you faced on the Odin step (of course I'm using the specific TWRP file for my unit) just want to know what error showed up. In my case it returned: FAIL! (Auth).
Will let the battery fully drain and after that repeat the TWRP flash. Do you remember (step by step) what you did after the battery drained? I mean charged to 30% then put on download mode? Any feedback will be appreciated.
BR\
My husband and I also ran into the problem of having our Samsung Tablet E nook 2017 model stuck on Retail Mode.. we tried EVERYTHING we could possibly think of after the 5444 password didn't work. We rooted, we downloaded "easy uninstalled" apps, did the hard reset with the 3 button deal.. nothing! Then we finally came across a few passwords we were willing to give a try.. so when you go to the retail mode bar and it prompts you for a password to uninstall try blue. The word BLUE but in lowercase.. and it worked! We were then given tons of options and finally got that crap off our paid for device. I'm 100% sure that any device purchased from Best Buy and stuck in retail mode will use the password blue. A few other passwords we came across that might be worth a shot if blue doesn't work are: galaxy and unlimited. (Each by themselves as one password) Well good luck, we know how frustrating this has been!!
Skapino said:
Hi huntejes,
I've a SM-T650NU unit and have the same issue you faced on the Odin step (of course I'm using the specific TWRP file for my unit) just want to know what error showed up. In my case it returned: FAIL! (Auth).
Will let the battery fully drain and after that repeat the TWRP flash. Do you remember (step by step) what you did after the battery drained? I mean charged to 30% then put on download mode? Any feedback will be appreciated.
BR\
Click to expand...
Click to collapse
Dude, I have a SM-t560nu and I feel your pain. For months I was trying to find a solution and had to deal with obnoxious fools who couldn't get it thru there heads that this was NOT the usual Samsung Retail Mode but a special piece of software that puts the tablet into a rolling cycle of 2-10 minutes, shuts off all developer options, locks frp and basically makes anything you do null and void. I tried every password Imaginable including "BLUE," "5444" and the oft repeated "M729Q16K8546" all to no avail.
Here's the deal: this IS unique software and you'll find it at retailsamsung.com. (I can't post the actual url because of the new user rules, which is kind of funny because I've been a member for about 10 years but I don't think I've ever posted anything.)
Go there, search your device and download 2 items: One will be your installation package (for instance "Samsung_Retailmode_Global_Common _141006.apk") and the other will be called "RetailMedia.main." Download both to na sd card, put the sd card in your device, move the programs from the sd card to the download area ON the device. Now start your device, got to the download area and tap on the first program, the apk. Enter 5444 as your password, follow the instructions. the second password will be "M729Q16K8546." This will remove the Retailmode software and most likely trigger a Samsung lock. Go to Sammobile, download the original firmware and congrats, your new tablet is finally working right.
I was wary of downloading software from such a plain site, especially one I've never heard of but I figured after 6 months of no luck and my new tablet just sitting in a drawer, unusable, what did I have to lose? Well, it works, i'ts awesome and it's like new.
Hope this helps.
Mfb5159, You Are Awesome! A friend entrusted me to remove the Retail Mode from her Samsung Galaxy Tab A 9.7. I tried Everything. The passwords that can be found everywhere online, circumventing the FVP (of course that was useless), downloaded & installed the firmware with Odin in download mode... nothing. Then I ran across this forum. Tried two versions of retail mode from RetailSamsung.com and the second one worked. I had to open the retail app I installed, enter the generic passwords (5444 & the M729Q16K8546), then it gave me the option to factory reset the device. I chose yes & it worked! No sign of Retail Mode on the tablet. It's like a brand new tablet!! The .apk file that worked for me was SamsungRetailMode_GlobalCommon_141006
Thank you So Much for your help.
I hope I'm not posting on a dead thread. I saw a good deal on a T813 in retail mode (will provide link if needed, it's on a very popular and legal south american online store). The thing is, as explained by the vendor, someone attempted to remove the retail app and now is stuck on a countdown in the lock screen. After some time it reboots itself. I've been reading a lot about the topic and the main problem seems to be the OEM unlock off. Now apparently I won't be able to access any feature of the device at all. I thought maybe I could reinstall the retail mode and get back the app or just boldly odin flash twrp and a stock rom risking myself to an FRP lock.
However I thought better ask advice first, so what do you think? Any help is greatly appreciated.
Well, I bought it and first day has been no success. I can access guest user, could log in to my ggl account and downloaded some apps. OEM, third party apps and developers are out of reach and cannot access main account. No sign of retail app.
Flashed new stock rom, FRP asks for a password, tryed 5444 Mz$%"#$%& blue galaxy unlimited with no luck. Attempts to flash twrp via odin fail due qst (?) error. I guess because is OEM locked. Flashed some older rom and still a countdown that doesn't let me in in main account.
So far, this is my progress with it. Any advice to flash twrp, remove frp lock and/or remove retail mode? Thanks in advance
_Iffer_ said:
Mfb5159, You Are Awesome! A friend entrusted me to remove the Retail Mode from her Samsung Galaxy Tab A 9.7. I tried Everything. The passwords that can be found everywhere online, circumventing the FVP (of course that was useless), downloaded & installed the firmware with Odin in download mode... nothing. Then I ran across this forum. Tried two versions of retail mode from RetailSamsung.com and the second one worked. I had to open the retail app I installed, enter the generic passwords (5444 & the M729Q16K8546), then it gave me the option to factory reset the device. I chose yes & it worked! No sign of Retail Mode on the tablet. It's like a brand new tablet!! The .apk file that worked for me was SamsungRetailMode_GlobalCommon_141006
Thank you So Much for your help.
Click to expand...
Click to collapse
Did the same, although I had to use the older ap_SamsungRetailMode_Global_Tab_A_L_v1.0.4_15031100_M15031100_P0.apk with my SM-T550 (Galaxy Tab A (2016) 9.7") - I also had to stop the existing RetailMode Service from running by opening applications, swipe across to Running Applications, and tap on the Retail Mode executables to disable the "Sta" service. Annoyingly if you accidentally get the password wrong then it'll reset itself and delete the newer APK and you have to start the whole process over again
Could anyone at least point me in the right direction please? I can't access the main user of the tablet because there's a lock on the screen saying "Try again in 1440 minutes" which is a day. It self reboots every 5 minutes and each time the 1440 minutes thing resets. I booted in safe mode, now it doesn't reset and countdown is set for the next 4 hours.
Please, any light on the matter will be great. I have 4 days to return and I wouldn't like to do it cause it was extremely cheap unless, but I don't want to end with an expensive brick either.
Huntejes,
I had the same experience as you with my SM T810. The particular version of the Samsung Retail app (com.samsung.sta.retailagent.lite 6.9.20161101) installed on my unit didn't have a 'configuration settings' option; instead an option called 'Store Settings' prompted a password entry - but admin passwords 5444, blue, galaxy, unlimited all failed.
So then I went the Odin/flash stock firmware route. Unfortunately, despite two rounds of that, the Retail Mode application and restrictions remained. However, what did arise from this seemingly pointless process was the ability to enable installation of third party apps under Settings - all other admin access and functions (i.e. factory reset, program uninstallation, etc.) remained under the restricted control of Retail Mode. I went through that process about a year ago, assuming I had failed - the restrictions remained, and I was out of ideas/options.
Two days ago, I decided to revisit the problem, having to reeducate/remember what I had done previously along the way. Eventually, I came up with a novel workaround that hadn't occurred to me before - side-loading an apk file containing a different version of the Retail Mode software. Ironically, this worked. After installing and running the alternative Retail Mode app, using admin password 'blue' I was able to uninstall the original (i.e. problem) Retail Mode app, enable factory restore, and execute a complete wipe, which was successful.
I know this thread has been silent for a while, but it was one of only two threads that I thought took the larger conversation beyond the first basic step and I thought that contributing to it would be a small way to express my thanks.
Cheers.
---------- Post added at 04:56 PM ---------- Previous post was at 04:46 PM ----------
It now seems that others (SeriousEion) have used the approach I mentioned above to successfully bypass Retail Mode in several of the most troublesome cases - it's very interesting to me that this thread only reactivated last month after having gone dark by the time I came across it in 2016.
---------- Post added at 05:08 PM ---------- Previous post was at 04:56 PM ----------
It now seems that others, namely mfb5150's post from 20-07-2017, have used the approach I mentioned above to successfully bypass Retail Mode in several of the most troublesome cases - I can confirm that the approach he outlines also works for the Samsung Galaxy Tab S2 (SM T810) using the apk files available from samsungretail.com
So thank you, mfb5150, for your post - had I seen it earlier you might have saved me an hour or two of trial and error. It's interesting to me that this thread has finally reactivated after having gone dark by the time I came across it back in 2016. I'm not a developer, and have no programming/coding experience, so I hope that this thread continues to be a resource for any others like me out there.
Hi guys,
I have a galaxy tab and sm-t561, which presents the problem of retail mode that you can not remove in any way even with odin, I wanted to ask, how do I install a version of retail mode via apk? I downloaded the new version of retail mode but how do I install it?
whchapma said:
Huntejes,
I had the same experience as you with my SM T810. The particular version of the Samsung Retail app (com.samsung.sta.retailagent.lite 6.9.20161101) installed on my unit didn't have a 'configuration settings' option; instead an option called 'Store Settings' prompted a password entry - but admin passwords 5444, blue, galaxy, unlimited all failed.
So then I went the Odin/flash stock firmware route. Unfortunately, despite two rounds of that, the Retail Mode application and restrictions remained. However, what did arise from this seemingly pointless process was the ability to enable installation of third party apps under Settings - all other admin access and functions (i.e. factory reset, program uninstallation, etc.) remained under the restricted control of Retail Mode. I went through that process about a year ago, assuming I had failed - the restrictions remained, and I was out of ideas/options.
Two days ago, I decided to revisit the problem, having to reeducate/remember what I had done previously along the way. Eventually, I came up with a novel workaround that hadn't occurred to me before - side-loading an apk file containing a different version of the Retail Mode software. Ironically, this worked. After installing and running the alternative Retail Mode app, using admin password 'blue' I was able to uninstall the original (i.e. problem) Retail Mode app, enable factory restore, and execute a complete wipe, which was successful.
I know this thread has been silent for a while, but it was one of only two threads that I thought took the larger conversation beyond the first basic step and I thought that contributing to it would be a small way to express my thanks.
Cheers.
---------- Post added at 04:56 PM ---------- Previous post was at 04:46 PM ----------
It now seems that others (SeriousEion) have used the approach I mentioned above to successfully bypass Retail Mode in several of the most troublesome cases - it's very interesting to me that this thread only reactivated last month after having gone dark by the time I came across it in 2016.
---------- Post added at 05:08 PM ---------- Previous post was at 04:56 PM ----------
It now seems that others, namely mfb5150's post from 20-07-2017, have used the approach I mentioned above to successfully bypass Retail Mode in several of the most troublesome cases - I can confirm that the approach he outlines also works for the Samsung Galaxy Tab S2 (SM T810) using the apk files available from samsungretail.com
So thank you, mfb5150, for your post - had I seen it earlier you might have saved me an hour or two of trial and error. It's interesting to me that this thread has finally reactivated after having gone dark by the time I came across it back in 2016. I'm not a developer, and have no programming/coding experience, so I hope that this thread continues to be a resource for any others like me out there.
Click to expand...
Click to collapse
i just follow your instructions and awesome mine is unlock now and downloading the update to android 7.0 thanks bro
Unfortunately, app has stopped in Marshmallow
Good morning in South Africa time to everybody !
I decided to post my situation in here since I can see that all of you are quite helpful and would be able to help me with my Lenovo K3 Note T3s, purchased recently
The strange thing is that I have older apps which I use but every, I mean every, ROM,for the T5, which I have installed to my Lenovo K3,and almost every app that I have installed, and when I run these apps,it returns an error stating...UNFORTUNATELY, xxx HAS STOPPED. Most of the apps do start, and when the error is displayed, i can still see the app in the background underneath the error text that is displayed, which seems that the app does start, but something is preventing it with displaying the error above, and shutting it down when I press on the OK text in the error
I have tried around five roms already, various ones, most from Needrom.com, made for the T5, and they all return the same error when running the newly installed app, its as if this phone has a built in security function that doesnt allow any apps to be installed and used! The original ROM was ok but too much of bloatware and chinese writing which required me to find a better rom
Currently as I type this, I am downloading a rom for the T3S from needrom.com, hoping that I dont receive this error anymore
I have installed an updated app on one of the roms and it worked and did not display the error, however, I use some apps that do not have a later updated version available which causes the error to be displayed.
Are there any ideas on what could be causing this ? I have tried a few things from what I have read via a google search but none has worked
Any ideas or help would be much appreciated!
PS: I will keep you guys informed of what happens from this time of writing as well, just in case I find the cause/solution and somebody out there is also going through the same problem.
Heres the latest update so far...
Installed Lenovo K3_Note_MTK6752_Android_5.0_20150513 ROM from http://www.teamandroiders.com/lenovo-k3-note-stock-rom-firmware/
Its Android version 5.0, and still the same problem, almost every app still gives me the same error.
Going to try a rom built for Lenovo K3 Note T3s and reply afterwards.
quetiano said:
Unfortunately, app has stopped in Marshmallow
Good morning in South Africa time to everybody !
I decided to post my situation in here since I can see that all of you are quite helpful and would be able to help me with my Lenovo K3 Note T3s, purchased recently
The strange thing is that I have older apps which I use but every, I mean every, ROM,for the T5, which I have installed to my Lenovo K3,and almost every app that I have installed, and when I run these apps,it returns an error stating...UNFORTUNATELY, xxx HAS STOPPED. Most of the apps do start, and when the error is displayed, i can still see the app in the background underneath the error text that is displayed, which seems that the app does start, but something is preventing it with displaying the error above, and shutting it down when I press on the OK text in the error
I have tried around five roms already, various ones, most from Needrom.com, made for the T5, and they all return the same error when running the newly installed app, its as if this phone has a built in security function that doesnt allow any apps to be installed and used! The original ROM was ok but too much of bloatware and chinese writing which required me to find a better rom
Currently as I type this, I am downloading a rom for the T3S from needrom.com, hoping that I dont receive this error anymore
I have installed an updated app on one of the roms and it worked and did not display the error, however, I use some apps that do not have a later updated version available which causes the error to be displayed.
Are there any ideas on what could be causing this ? I have tried a few things from what I have read via a google search but none has worked
Any ideas or help would be much appreciated!
PS: I will keep you guys informed of what happens from this time of writing as well, just in case I find the cause/solution and somebody out there is also going through the same problem.
Click to expand...
Click to collapse
Ok when you flash it the flash tools, you use the preloader.bin and lk.bin frome the original rom?
When you instal the new rom make recovery reboots betwen wipes? This last is for you make a clean instal and avoid problems like that you have it now, or meaby you can lost the imei number, or the keyboard miss it, i dont know many problem came if you dont make reboots betwen wipes
I hope be helpfull to you.
Enviado desde mi Lenovo K50-t5 mediante Tapatalk
Thank you for your reply.
I came across a website that had a guide to try, two options were available, the first option I have tried and it worked, havent tried the second option though. The first option was the Android System Webview app, where, by opening it under apps in settings, and choosing to uninstall the update, it should help fix my error, and it did. There were one or two apps that still gave me the same error but most of the apps began to work after doing this.
Hi guys I'm trying to flash Jovi's Custom Rom. I accidentally pressed the update button on my phone that allows the Latest update from t-moble to kill the phone so It wont charge. Luckily I have quite a but of battery power left and I'm franticly trying to flash a jovi's custom rom. currently I'm getting a "Failed" message when trying to flash on ODEN 3.12 here are the directions I followed to the letter but no success.
First Thing Your Going To Do Is Download Both graceqltetmo_N930TUVU1APGC_Stock_Deodexed.zip And N930T_Note7_Adb_Rootkit_And_Odin_Pack.zip Files From The Download Link Section Below.
2. Extract All The Files From N930T_Note7_Adb_Rootkit_And_Odin_Pack.zip Onto Your PC Desktop, You Will Then Have Eight Files On Your Desktop Which Will Be MODIFIED_TMO_SPR_N930PVPU1APH3_REV00_ENGBOOT_FIRMW ARE.tar.md5, graceqltetmo_N930TUVU1APGC_Stock_Deodexed.img, SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.45.0.exe , adb-setup-1.4.3.exe, CommandPrompt.bat, Odin3.exe, Odin3.ini, And sun7.
3. If You Haven't Setup ADB On Your PC Yet Or Installed The Samsung USB Drivers, Just Open Both Executables SAMSUNG_USB_Driver_for_Mobile_Phones_v1.5.45.0.exe And adb-setup-1.4.3.exe And Complete Both The Setup Processes. Once Done You Should Now Have A Created ADB Directory Which Should Be Located At C:\adb. Once ADB Is Setup, Place The sun7 Folder And CommandPrompt.bat Inside Your ADB Folder From The New Directory.
4. Now Put Your Phone Into Download Mode By Powering Off Your Device First And Then Hold The "Volume Down+Home+Power Buttons" At The Same Time Until You See The Download Mode Warning Screen. Now Press The "Volume Up Button" And Then Insert Your Samsung USB Plug.
5. Now Open Odin3.exe, Click On "AP", Select "MODIFIED_TMO_SPR_N930PVPU1APH3_REV00_ENGBOOT_ FIRM WARE.tar.md5", And Then Click On "Start". Wait For A Couple Of Minutes For The Modified N930PVPU1APH3 Engboot Firmware To Finish Installing. After this step it says failed so this is where I'm suck currently at the bootloader. thanks guys for your help
Does your phone still work?
Proud owner of the Samsung Galaxy Note 7. ? Take that Samsung ???.
shanda5303 said:
Does your phone still work?
Proud owner of the Samsung Galaxy Note 7. Take that Samsung .
Click to expand...
Click to collapse
It still works its just stuck at the boot loader. I think when I attempted to flash the stock rom back on the phone It wiped everything. Honestly I'm not trying to root I'm just trying to install the stock rom
You should be able to download it in Sammobile, they usually have every firmware available for Samsung phones. Then you would want to checkout the N7A their accepting beta testers for v2 of the app. Maybe check with them before to see how you should proceed on reinstalling the initial firmware to avoid the update again.
Proud owner of the Samsung Galaxy Note 7. ? Take that Samsung ???.
shanda5303 said:
You should be able to download it in Sammobile, they usually have every firmware available for Samsung phones. Then you would want to checkout the N7A their accepting beta testers for v2 of the app. Maybe check with them before to see how you should proceed on reinstalling the initial firmware to avoid the update again.
Proud owner of the Samsung Galaxy Note 7. Take that Samsung .
Click to expand...
Click to collapse
Ok thanks. I'm doing that now Ill keep you posted of how it goes. thanks for the help I appreciate it.
[email protected] said:
Ok thanks. I'm doing that now Ill keep you posted of how it goes. thanks for the help I appreciate it.
Click to expand...
Click to collapse
No problem I've been using package disabler pro & N7A's shield for a while now and haven't had any issues. Plus N7A is a really great community especially when other forums don't provide much assistance. I think about 80% off the people still using the Note 7 have either joined N7A or the N7 Rebels (I've heard they charge for their app & assistance but haven't verified myself). ?
Proud owner of the Samsung Galaxy Note 7. ? Take that Samsung ???.
shanda5303 said:
No problem I've been using package disabler pro & N7A's shield for a while now and haven't had any issues. Plus N7A is a really great community especially when other forums don't provide much assistance. I think about 80% off the people still using the Note 7 have either joined N7A or the N7 Rebels (I've heard they charge for their app & assistance but haven't verified myself).
Proud owner of the Samsung Galaxy Note 7. Take that Samsung .
Click to expand...
Click to collapse
Ok cool I just signed in to N7A site. It looks really informative. I downloaded the firmware from sam mobile as you suggested also I have about 10 more minuits before its done downloading. ill keep you posted.
Ok I'd check the help and tutorials section for re-flashing firmware after an update, cause I'm not sure how you would avoid getting the update again unless you have a some sort of shield or package disabling app in place.
Proud owner of the Samsung Galaxy Note 7. ? Take that Samsung ???.
downloading the shield now. hopefully this works because I had to go back to using my note 3. and I'm like OMG what a major downgrade
[email protected] said:
downloading the shield now. hopefully this works because I had to go back to using my note 3. and I'm like OMG what a major downgrade
Click to expand...
Click to collapse
I have a Note 5 as a backup and even that feels like a major downgrade I can't imagine what a Note 3 would be like.
Proud owner of the Samsung Galaxy Note 7. ? Take that Samsung ???.
shanda5303 said:
I have a Note 5 as a backup and even that feels like a major downgrade I can't imagine what a Note 3 would be like.
Proud owner of the Samsung Galaxy Note 7. Take that Samsung .
Click to expand...
Click to collapse
Hey just giving you an update. Phone still stuck at boot loader but I have watched the lady known as catwoman video on youtube. I have downloaded and unzipped all the files and even tried to flash without success. Oden keeps giving me a fail. The only problem is with the smart switch application she recommended for download. I downloaded it and ran the app like suggested. It said that the my device is unsupported by smart switch. I cam to the conclusion that this is the way I should have started vs wiping everything which is the reason I'm stuck at the boot loader because there is no data on my phone. Here are the steps I took to get past this problem.
1. Reinstalled Smart Switch, but after the re- install no success.
2. I reopened Smart Switch and clicked the tab that says "MORE" then on Emergency Software & instillation. I followed the steps which included imputing my device model number and S/N. Did that but my device is still reading as a unsupported device on smart switch. I'm in progress of contacting her to see if she or any of her team as any ideas. Hopefully I'm back up and running soon. I cant wait for the note 8 so I can be done with this
Hey just giving you an update. Phone still stuck at boot loader but I have watched the lady known as catwoman video on youtube. I have downloaded and unzipped all the files and even tried to flash without success. Oden keeps giving me a fail. The only problem is with the smart switch application she recommended for download. I downloaded it and ran the app like suggested. It said that the my device is unsupported by smart switch. I cam to the conclusion that this is the way I should have started vs wiping everything which is the reason I'm stuck at the boot loader because there is no data on my phone. Here are the steps I took to get past this problem.
1. Reinstalled Smart Switch, but after the re- install no success.
2. I reopened Smart Switch and clicked the tab that says "MORE" then on Emergency Software & instillation. I followed the steps which included imputing my device model number and S/N. Did that but my device is still reading as a unsupported device on smart switch. I'm in progress of contacting her to see if she or any of her team as any ideas. Hopefully I'm back up and running soon. I cant wait for the note 8 so I can be done with this
Hi everybody, I don't know if this will help all you but this is what worked for me (Android 6.0.1):
1. On the setup wizard (after factory wipe), connect to internet (wifi/data)
2. Select "Emergency call"
3. Call to any valid number (112 for example)
4. When the calls start swipe to the left on the dialing screen and you will see message and browser displayed (in my case the message method doesn't works).
5. Select browser.
6. Go to google.
7. Search for Package Disabler Pro 9.8
8. Download it and install it.
9. Open it and search for "Samsung account".
10. Click on Clear Data and then Disable.
11. Go back to google and search for QuickShortMaker
12. Install it and open it.
13. Search for "Setup Wizard", it will expand.
14. Select the one with ".setupwizards.SetupExitActivity"
15. Done! You can now use the phone and restart.
Ok after this you can go and check that there is no Samsung account displayed (Settings>Accounts), buuuuut, you can't add it . What I did was:
1. Go back to Package Disabler Pro and enabled "Samsung Account".
2. Then go to Settings>Back up and reset
3. Factory data reset
4. Asked for Samsung account and I inserted my real account.
5. Done, now I can sync with my account.
The oooooooonly issue that I can't figure out it's the way to remove the "Reactivation lock" from Settings>Lock screen and security>Find my mobile.
Well that's all hope it works for you guys.
If this doesn't work for you, you can check out unlockjunky, they will definitely be able to do it.
Good luck!!
xxspokiixx said:
Hi everybody, I don't know if this will help all you but this is what worked for me (Android 6.0.1):
4. When the calls start swipe to the left on the dialing screen and you will see message and browser displayed (in my case the message method doesn't works).
Click to expand...
Click to collapse
when i'm calling i cannot swipe to the right. Is there anyother way to open the browser?
112
What ever you do, absolutely do not dial for example ( 112 )
Turns out 112 will connect you to your local emergency dispatch.....
Ask me how I know...
please change your number in the above post for newbies who may be trying to learn and have no clue what these phones are capable of...
Thanks
xxspokiixx said:
Hi everybody, I don't know if this will help all you but this is what worked for me (Android 6.0.1):
Click to expand...
Click to collapse
Mate, you are an absolute legend! I've been searching for 8hrs looking for a solution after hard resetting my phone and being unable to get past the Samsung Account lock afterwards (even though I had the right username & password!) About fifty useless/outdated YT videos & a few hundred websites/forums later - none of which were helpful, I finally stumbled across your post, despite it not showing up 8hrs ago when I came straight to XDA hoping to find a solution first.
I have an improved method for #2, 3 & 4 of your post and will add all relevant info soon (just need some kip now that the panic is over). I'll also expand a little on some details and include further options which worked in my particular case, but all n'all - you're an absolute legend mate and I'd be screwed & still panicking without your shared info. Huge thanks...
Nice meme dude ya got me
Nomak1835 said:
What ever you do, absolutely do not dial for example ( 112 )
Turns out 112 will connect you to your local emergency dispatch.....
Ask me how I know...
please change your number in the above post for newbies who may be trying to learn and have no clue what these phones are capable of...
Thanks
Click to expand...
Click to collapse
AGREED!!!!!!!!! DO NOT DIAL 112!!!!!! It switches to 911... not a funny joke
Nomak1835 said:
What ever you do, absolutely do not dial for example ( 112 )
Turns out 112 will connect you to your local emergency dispatch.....
Ask me how I know...
please change your number in the above post for newbies who may be trying to learn and have no clue what these phones are capable of...
Thanks
Click to expand...
Click to collapse
You have to dial an emergency number or this trick doesn't work. Its not practical for most folks but if you are worried about dialing an emergency number I'd recommend using a SIM out of a tablet that isn't phone number enabled.
its working for j7 prime bypass samsung account
Hi, First of all thanks for this thread. i made it to #8 but when i download the apk and i cant figure out how to install it to complete steps 9 and 10. Maybe i'm over looking something im not sure but i need help.
TIA
Beasy936 said:
Hi, First of all thanks for this thread. i made it to #8 but when i download the apk and i cant figure out how to install it to complete steps 9 and 10. Maybe i'm over looking something im not sure but i need help.
TIA
Click to expand...
Click to collapse
Look for Aptoide apk download it to sd card and search for package disabler in this app and install it or download and copy Pachkage disabler you your sd card and run via file explorer or download and run ES File manager as I did.
when i make the call my wifi gets turned off and wont come back on till i restart the phone. i managed to open the browser but the wifi is off so i cant do anything after that except cry.
stock 5.0
Did you get it figured out I got the edge 6 plus to work fine now it was one of the tougher ones and I've done a few on some newer models what are you stuck on?
I thought the Combination Firmware would reset the FRP lock by default after being installed.
first thank you for sharing ur experience and i want to add
that i done it step by step and it works nicely but still cant remove the reactivation
and here is how iv done it after i bypassed it using ur method
i flashed a lower modem file from stock rom N910VVRU2BOG5 which is 5.0.1
at this point my imei went off
so i went for full flash by N910VVRU2BPA1_N910VVZW2BPA1_N910VVRU2BPA1_HOME. which is 5.1.1 and did full hard reset
then i just signed in with the last Samsung account i used with ur method earlier and it passed so now i can easly remove reactivation mark , unlock and root then make it Arabic .
thx again
Did you ever post up the suggested steps to replace #'s 2-4 in the original post above? I'm not seeing them anyplace. This would be a big help. Thanks.
When I call I can't swipe to the right is there another way to open browers
I successfully used this to gain access to my phone but I believe that if I power cycle it I will be locked out again. Is there any way to remove or change the samsung account now that I am in? The options are greyed out in settings.
ADB and Root.
Hey, I have been working on these for a while keep finding new things each time I try to remove Reactivation Lock. However I was wondering if I show you guys how to enable ADB with RSA Key, and Root the device. Could someone show me how to remove the Reactivation Lock using root. I used other methods on older and newer models, but these S5's are the only ones giving me issues.
After weeks of going mad trying different solutions I've found online, here's what worked 100% for me just last night:
Login to Samsung Account on other device, select Password & Security, enter password then choose Devices. LOG-OUT of your S6 Edge if listed, confirm. Next change password - doesn't matter what, can even change it back afterwards.
Flash Lollipop (I used G925VVRU4BOK7)
Wipe Data/Cache
Boot fresh Stock firmware, enter/confirm network details, at Reactivation Lock prompt, enter user & updated password. Sign-in....
Settings -> Lock Screen & Security -> Find My Mobile. Unselect Reactivation Lock and enter password... voila!
Works for anybody else??
when i made the call the wifi turn of
Using Odin files to update a Samsung AT&T model will almost always result in a factory reset being performed, and I've also seen the same thing happen when trying to update via OTA zip in Recovery. I'm providing this package for anyone still using the S5, to be able to update software without needing to do a factory reset. I have personally verified that these files will perform the update without wiping any data. These files will update you to the Build/Baseband ending in QD1, Android 6.0.
My zips are compressed extra small for space and bandwidth savings. The default Windows extractor can't handle it, so you'll need a 3rd party tool like 7zip, WinRAR, etc.
Happy flashing!
https://www.androidfilehost.com/?fid=1899786940962576350
Worked great..Thanks! But....
You are theman for this! I have a 900A AT&T and have struggled for days to get it unlocked, upgraded and working without tripping the secure software alert. I started with a 4.X maintenance OS, then rooted, SafeStrapped then pushed this update via ODIN and it worked. Now, the only issue i am having is apps crashing continuously. Started with google play and play services now spreading. I ASSUME this is due to apps not getting updated in the update to 6.X. Correct me if I am wrong. I have updated those via APKs along with others to new versions yet it still happens. Now its also Chrome, File manager etc. Is this maybe a code bug, or am I missing something here? Thanks again
3rdRockfromSun said:
You are theman for this! I have a 900A AT&T and have struggled for days to get it unlocked, upgraded and working without tripping the secure software alert. I started with a 4.X maintenance OS, then rooted, SafeStrapped then pushed this update via ODIN and it worked. Now, the only issue i am having is apps crashing continuously. Started with google play and play services now spreading. I ASSUME this is due to apps not getting updated in the update to 6.X. Correct me if I am wrong. I have updated those via APKs along with others to new versions yet it still happens. Now its also Chrome, File manager etc. Is this maybe a code bug, or am I missing something here? Thanks again
Click to expand...
Click to collapse
No idea. Can't really diagnose app crashes - too many possibilities.
Also: hopefully you're now aware that you're not rooted any longer and (probably) can't ever root it again
iBowToAndroid said:
No idea. Can't really diagnose app crashes - too many possibilities.
Also: hopefully you're now aware that you're not rooted any longer and (probably) can't ever root it again
Click to expand...
Click to collapse
Yeah I saw that, but thats ok. My biggest objective is to get it unlocked from AT&T so I can use it (this whole venture has just turned into a learning/fun toy to play with now) on my carrier. That is yet TBD. Any thoughts on that?
3rdRockfromSun said:
Yeah I saw that, but thats ok. My biggest objective is to get it unlocked from AT&T so I can use it (this whole venture has just turned into a learning/fun toy to play with now) on my carrier. That is yet TBD. Any thoughts on that?
Click to expand...
Click to collapse
https://www.att.com/deviceunlock/
Thanks in advance for any help, short version at top, details below.
-- Short version:
Please help me recover my data, and phone if possible.
I need the data, esp texts and notes, for both personal (some family members have passed on) and business.
I have a new Galaxy S21 and / or PC Smart Switch ready to receive data backup if we can evacuate it from the S5.
ODIN flash seems to pass but has 'Resizing Data' fail, and phone still won't boot past AT&T logo screen.
All web searches seem to say Factory Reset is my last option, but I don't want to lose the data.
Please share ANY advice on how I can recover the data.
-- More details:
Phone = SM-G900A Samsung Galaxy S5 AT&T
Use = pristine, never rooted, modded, or unfortunately backed up
Status = will not boot, passes screen 1 'Galaxy S5', screen 2 'Samsung script', then stops on screen 3 'AT&T globe logo'
More details = Used clean for ~7 years, then on day x, saw phone automatically complete a system update (green screen, sprockets, "your phone is updating"), which was surprising as it's years after it is no longer supported by AT&T. After that update, I continued to use the phone that day, but it then rebooted automatically and stuck on the AT&T globe logo.
Attempts to fix = soft reset, battery pull, can't get into SAFE MODE, can get into and out of recovery mode, found this firmware (THANKS @iBowToAndroid), used multiple ODIN (Odin3 v3.13.3_3B_PatcheD, Odin3 v3.14.1_3B_PatcheD) to flash it (my first Android flashing experience). On flashing process, ODIN on PC shows 'PASS' and log shows "<OSM> All threads completed. (succeed 1 / failed 0)", but phone shows 'Resizing Data' failed:
"
Supported API: 3
-- Installing package...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
Successfully installed package.
-- Resizing Data...
Can't open dir '/data/user/0/com.sec.knox.bluetooth' (Permission denied)
E:failed the resizing-data
"
PFA screen shots
Martin2019 said:
Thanks in advance for any help, short version at top, details below.
Click to expand...
Click to collapse
Trying the "wipe cache partition" is the only thing I can think of
iBowToAndroid said:
Trying the "wipe cache partition" is the only thing I can think of
Click to expand...
Click to collapse
Short version:
THANKS for the quick reply, very much appreciate your help.
Am I really left with only a Factory Reset and then trying to use Data Recovery software to get ‘some’ data back?
I really don't want to give up on the data, so I'm still trying anything I can think of in research and repeated attempts.
More details:
I have tried the recovery mode 'Wipe cache partition' option before and after using ODIN.
I've tried doing it 'twice' per recommendation of some of the web advice I've read in trying to research this.
I've noticed that sometimes the colored highlight of the 'Reboot to bootloader' option then turns background green instead of usual blue, but I don't know why, or if that matters.
Still, the ODIN flash effort always returns the permission error, and the boot always sticks on the AT&T logo.
The string seems to indicate a 'user data' permission error?
Is there any way to debug the logic of the firmware or slog through the 'Recovery Logs' to determine and resolve the cause of the permission error?
When the problem began, I had an SD card and SIM card loaded.
I've since removed both in trying to address this, also per 'web advice'.
Any chance putting them back in helps somehow?
Any other options available via apply update from SD card or ADB?
Any way to setup the Android OS as a secondary drive to another machine to pull data out that way?
I've done similar things with Windows OS in PC environment, but I'm not seeing anyone trying that with Android.
If I am really stuck with factory reset, are there any data recovery programs I could try afterward that work with the G900A?
So far I've looked at Dr Fone, Tenorshare, EaseUS, FonePaw, and D-Back, and none seem to work with the AT&T model variant.
Maybe that's just because they don't have access to AT&T firmware available to install, but if I clear the stuck boot via FR, they then might be able to get some of my data back via drive scan - whatever data is not truly overwritten by the FR?
Martin2019 said:
Short version:
THANKS for the quick reply, very much appreciate your help.
Am I really left with only a Factory Reset and then trying to use Data Recovery software to get ‘some’ data back?
I really don't want to give up on the data, so I'm still trying anything I can think of in research and repeated attempts.
More details:
I have tried the recovery mode 'Wipe cache partition' option before and after using ODIN.
I've tried doing it 'twice' per recommendation of some of the web advice I've read in trying to research this.
I've noticed that sometimes the colored highlight of the 'Reboot to bootloader' option then turns background green instead of usual blue, but I don't know why, or if that matters.
Still, the ODIN flash effort always returns the permission error, and the boot always sticks on the AT&T logo.
Click to expand...
Click to collapse
I own and run a business that performs SIM unlocking and other software-related services for mobile devices, so we see situations like yours quite a bit. And I don't know of anything else that you can do. From reports, we've heard that none of those "recovery services" actually work to recover any data, after a reset
iBowToAndroid said:
I own and run a business that performs SIM unlocking and other software-related services for mobile devices, so we see situations like yours quite a bit. And I don't know of anything else that you can do. From reports, we've heard that none of those "recovery services" actually work to recover any data, after a reset
Click to expand...
Click to collapse
Disappointing to hear bad news, but appreciate your effort and insight in providing it, thanks.
I've learned alot in researching it.
I just wish I'd known it before the problem, which I'm sure you also hear quite a bit.
Please let me know if you think of anything else I can try.
Martin2019 said:
Disappointing to hear bad news, but appreciate your effort and insight in providing it, thanks.
I've learned alot in researching it.
I just wish I'd known it before the problem, which I'm sure you also hear quite a bit.
Please let me know if you think of anything else I can try.
Click to expand...
Click to collapse
You can never trust a mobile device 100%, especially not one that's 7 years old. That's why anything that's that important needs to be backed up at all times
iBowToAndroid said:
You can never trust a mobile device 100%, especially not one that's 7 years old. That's why anything that's that important needs to be backed up at all times
Click to expand...
Click to collapse
Totally agree, and totally on me for not having a backup.
I was just foolish enough to not know yet how easy it is to back up.
Give me 10 minutes of life again now in this phone, I use Smart Switch to backup, and I'm off to a new phone, or even FR on this one and reload.
Now where did I put my Delorean...
iBowToAndroid said:
You can never trust a mobile device 100%, especially not one that's 7 years old. That's why anything that's that important needs to be backed up at all times
Click to expand...
Click to collapse
Have you ever tried a 'combination key' approach to get data access?
As in...
Smart Switch on PC won't connect, but ODIN does show 'Added'.
I don't understand the granular details, but hoping you might...
Could we use both Smart Switch and ODIN in some combination sequence that would allow Smart Switch to pull the data off to a Smart Switch PC backup that I could then throw onto a new phone?
When it's in Downloading (firmware flashing) mode, a modem port is used. The modem port is also there when the device is booted up in Normal mode, but that's not useful for extracting any data off of it. I don't know what Smart Switch uses, but I would assume File Transfer (MTP) and/or ADB. And those aren't fully functional until the device fully boots up.
Do you have a screen lock on the device?
iBowToAndroid said:
When it's in Downloading (firmware flashing) mode, a modem port is used. The modem port is also there when the device is booted up in Normal mode, but that's not useful for extracting any data off of it. I don't know what Smart Switch uses, but I would assume File Transfer (MTP) and/or ADB. And those aren't fully functional until the device fully boots up.
Do you have a screen lock on the device?
Click to expand...
Click to collapse
No lock on device, just swipe to go from 'lock screen' to home screen, prior to this boot problem obv.
One of the data recovery sw that I tried (EaseUS I think) did reach a screen asking me to enable USB debugging to continue, but I don't think I can do that without booting up.
I 'think' I remember that screen saying something like 'MTP device' connected, when it asked me to do that.
Any way to sneak into MTP mode from that?
Martin2019 said:
No lock on device, just swipe to go from 'lock screen' to home screen, prior to this boot problem obv.
One of the data recovery sw that I tried (EaseUS I think) did reach a screen asking me to enable USB debugging to continue, but I don't think I can do that without booting up.
I 'think' I remember that screen saying something like 'MTP device' connected, when it asked me to do that.
Any way to sneak into MTP mode from that?
Click to expand...
Click to collapse
Any 3rd party software will require ADB to be enabled. Smart Switch is the only one that *might* work just over MTP, but I'm pretty sure MTP doesn't fully load until the device is booted. Even if it did, you would likely need to allow on the popup message. Does the phone show up as a device/drive when it's plugged in while sitting on the AT&T logo?
I think you're asking "does the phone show up as a device/drive" in something like a windows file explorer, and the answer is unfortunately no, or at least not that I've found yet - I've tried several times now, and I'm still trying any combinations I can.
For now...
I can get EaseUS to show 'MTP USB device' per the pic attached in my last, but can't really get it to connect past that point, as it asks for USB Debugging, which it appears I can't do due to stuck in boot loop.
Smart Switch seems to try to connect for awhile, then says it failed to connect, so I think I'm then left with 'Samsung Smart Switch Emergency Software Recovery' (PFA).
Do you have experience using it?
Do you know if it could work to reload the firmware / OS without wiping the data?
AT&T Advanced Technical Support guy says it gives you an option to choose whether or not using it resets the phone (wipes your data), so he thinks (hopes) that would work, but he didn't sound certain at all.
I understand your point on the pop up message user prompt for File Transfer Mode. I used that mode many times in the past, so I'm hoping it might default on the phone so we wouldn't need to answer the pop up prompt to reach that status , but I'm obv not sure about that.
Per the speculation in my last, do you know of any combination approach we might use to get the desired result, like maybe... use ADB somehow to change 1 parm value to reach MTP mode, then use that progress step to enable Smart Switch to connect so we could offload the data?
Thanks again for your help
1. MTP is the same as File Transfer. So when the phone is turning on, it starts loading that connection. You might see "MTP USB Device" or something similar in your Windows Device Manager
2. But if the phone never shows up as a device/drive (would show up under "Portable Devices" in Windows Dev Man), then it's not loading fully - and it normally doesn't do that until it boots past the carrier splash screen.
3. Even if it did boot fully and showed up as a device/drive, the MTP pop-up prompt shows up every single time you connect the device. There's no way around that. So the device would show as empty, with no files or folders, until you tapped "Allow" on the popup.
4. No, there's nothing else you can do to turn on any other connection modes
iBowToAndroid said:
1. MTP is the same as File Transfer. So when the phone is turning on, it starts loading that connection. You might see "MTP USB Device" or something similar in your Windows Device Manager
Click to expand...
Click to collapse
Device Manager does show an entry for the phone connected via USB cable:
Under 'Disk Drives' as
SAMSUNG MZMTE256HMHP-000MV
Under 'Universal Serial Bus Controllers' as
SAMSUNG Mobile USB Composite Device
Please tell me that helps us somehow?