This is the PB1 version of NN-J kernel. It's going to go in a little different direction than the previous kernel. There are a lot of changes in PB1. That's why a new thread. And I'm not very good with Git. So may I present to you.....
NNPB1-Kernel
This will work on the T710 and 810 Wifi only models.
You flash this at your own risk. There's the discaimer.
Install instructions:
You MUST HAVE ROOT and TWRP installed to flash this!!
It's built on Lollipop 5.1.1 - I have no idea what will happen if you flash this on anything else!!
Flash kernel then wipe cache and dalvic
Reboot and profit!!
Changelog
V1.2
Just enabled some more OTG stuff. It might help for some people to get it to work. But V1.1 works already.
Nothing more, so no need to update unless you want.
V1.1
Synapse enabled
More optimizations
OC/UC Big 2.2Ghz and 500Mhz. Little 1.6Ghz and 200Mhz
UV all cores
Booting frequencies up to 1.7Ghz and 1.4Ghz
Gentle fair sleepers
Hotplug
FIOPS scheduler
Enabled 650Mhz GPU clock
UC and voltage control GPU
Charge Control
V1
PB1 source
No Synapse - yet. This is as far as I can build it without synapse. I think you'll like it.
Selinux Permissive
KNOX removed
Init.d support
Enabled OTG
Updated Frandom
Govs enabled- Powersave, Conservative, Ondemand - removed Userspace
Optimizations
This is a Tablet, so I won't be adding things like I would for a phone.
______________________________
Downloads:
NNPB1-Kernel-V1.2-710
NNPB1-Kernel-V1.2-810
NNPB1-Kernel-V1.1-710
NNPB1-Kernel-V1.1-810
NNPB1-Kernel-V1-710
NNPB1-Kernel-V1-810
XDA:DevDB Information
NNPB1-Kernel-LP-T710/810, Kernel for the Samsung Galaxy Tab S2
Contributors
engine95
Source Code: https://github.com/engine95/exynos5433-BPB1-gts28-210wifi.git
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2016-03-27
Created 2016-03-28
Last Updated 2016-04-15
New and latest Kernel. Source makes me put this in a new thread. And I suck with Git. (Or I just know what I HAVE to know about it)
There is No Synapse interface built in yet. But don't let that stop you. It's running really good. I think you'll like it.
Edit: 810 is up. Thanks to @Billy06010 for testing
engine95 said:
New and latest Kernel. Source makes me put this in a new thread. And I suck with Git. (Or I just know what I HAVE to know about it)
There is No Synapse interface built in yet. But don't let that stop you. It's running really good. I think you'll like it.
Edit: 810 is up. Thanks to @Billy06010 for testing
Click to expand...
Click to collapse
T810 5.1.1 - Boots fine.... I'll get back in a couple days with performance.... I'm sure it's GREAT! Thanks again.
What is the advantage to flashing this kernel instead of the previous one? Boosted performance and/or battery life?
mbducati said:
What is the advantage to flashing this kernel instead of the previous one? Boosted performance and/or battery life?
Click to expand...
Click to collapse
Latest source
mbducati said:
What is the advantage to flashing this kernel instead of the previous one? Boosted performance and/or battery life?
Click to expand...
Click to collapse
Post above, yes and yes. You can always flash/restore back to stock if it's not for you. Just another choice.
it is running good.. I just see all the time a notification of a security warning.. (in my lanuage). unauthorized actions detected
Error404html said:
it is running good.. I just see all the time a notification of a security warning.. (in my lanuage). unauthorized actions detected
Click to expand...
Click to collapse
You probably need to delete, in system/app/SecurityLogAgent.apk. It only happens with bone stock ROM. In my roms, it's already removed.
hi,
is external sd card write also enabled?
IngoPan said:
hi,
is external sd card write also enabled?
Click to expand...
Click to collapse
That's through the ROM. platform.xml is the file that needs to be modified. It's in my roms as the "SD card fix".
Sent from my LGLS990 using XDA-Developers mobile app
andyroidking said:
T810 5.1.1 - Boots fine.... I'll get back in a couple days with performance.... I'm sure it's GREAT! Thanks again.
Click to expand...
Click to collapse
Running smooth. No issues at all! Might be getting a little better battery but I also run a lean android system.... Thanks again!
Thanks, i flashed the canadian stock rom and then your kernel. As there is no Xposed framework now (i had before) what
ROM do you recommend to flash (must be deodexed i suppose) ?
IngoPan said:
Thanks, i flashed the canadian stock rom and then your kernel. As there is no Xposed framework now (i had before) what
ROM do you recommend to flash (must be deodexed i suppose) ?
Click to expand...
Click to collapse
Check out this post. http://forum.xda-developers.com/showthread.php?p=66145174
710 or 810 shouldn't make a difference.
Edit. Gapps and permissive hack you shouldn't need though. They're built in. But maybe??
Sent from my LGLS990 using XDA-Developers mobile app
Looking forward to a Synapse enabled version with CPU & GPU UC & UV - then I'll flash it
hasenbein1966 said:
Looking forward to a Synapse enabled version with CPU & GPU UC & UV - then I'll flash it
Click to expand...
Click to collapse
It's in the works. It'll be coming out with everything. I'm having some issues but it should be done in the next couple days.
Sent from my LGLS990 using XDA-Developers mobile app
V1.1 is up!! See/read changelog!!!
810 users. I need to know if Synapse is working. It should. I just need confirmation.
Enjoy
Gimme a few.
Synapse is working fine on 810
Sent from my SM-T810 using XDA-Developers mobile app
andyroidking said:
Running smooth. No issues at all! Might be getting a little better battery but I also run a lean android system.... Thanks again!
Click to expand...
Click to collapse
works perfect.
Must I change original Neked Nook PB1 kernel with this one?
Related
I made this kernel for my own use.
Decided to share it.
My reason for making this kernel is because I have been trying kernel after kernel and have not been able to stay on a single one.
Every time my main issue was that the phone would get uncomfortably hot, the only kernel that wouldn't was always @showp1984's kernel with his 3-phase thermal. At first I was enjoying it until I saw all these other kernels getting updated with new features so I decided to update showps kernel, it wasn't a big update but it still suffered from the SODs caused by his in-kernel mpdecision (which I'd prefer over Qualcomm's) so I decided to just grab my next favorite kernel and update it with thermal. I've been testing it for a few days and haven't had it get as hot as it used to so I'm happy with it. I'm not a developer I just wanted something for me. It has the same features as @Faux123's kernel which include...
-Dynamic FSync
-Eco Mode
-Turn MPDecision on/off
-OC up to 1.8GHz
-UV to 700000mV
-Sweep2Wake
-Fast Charge
-Veno/Reno/Bic/Cubic/Westwood+/HTCP
-GPU OC up to 487MHz
-3 phase thermal
-FIOPS/NOOP/DEADLINE/ROW/CFQ/SIO schedulers
-compiled with the latest Linaro toolchain O2 optimized
-its also hard coded with moles' colors that everyone is raving about (they are good though thats why i included them)
I personally like using Kernel Tuner which allows modifying the 3 phase thermal parameters.
Hope you guys enjoy it.
New release method:
Each release will have a folder, in the folder will be a kernel with hardcoded values from Molesarecoming. I'll just use the most popular few because id rather not wait a few mins uploading each kernel from my phone :l
February 8, 2013
http://www.mediafire.com/?3t5vz8t21m2wl
About the source:
It took me a few hours to download each repository (faux123 and showp) since im tethering off my phone (which is faster to download than upload with TMo speeds) , so i haven't uploaded the source. I can probably upload the patches (a lot smaller in size) which can be applied to Fauxs source thus producing this same kernel
Glad i was trying my hand at git, still such a noob but i was able to figure something out. Sorry if it isn't proper :l
https://github.com/jassycliq/mako
so this is based on faux's kernel?
Yes, it is up to date with his github source.
and i'm assuming BLUEHOLO color tweak?
What do you mean? I posted everything that I included, nothing more nothing less
jassycliq said:
What do you mean? I posted everything that I included, nothing more nothing less
Click to expand...
Click to collapse
He's talking about PA color... lol That's what everyone is talking about lately...
Did you replace the mpdecision ? i didn't quite understand the op
meangreenie said:
Did you replace the mpdecision ? i didn't quite understand the op
Click to expand...
Click to collapse
No, I previously had compiled a kernel that replaced Qualcomm's proprietary mpdecision with showps in-kernel mpdecision but it would cause SODs so i decided against it.
It still uses Qualcomms mpdecision but just like Faux123's kernel you can turn it off and use intelli_plug.
jarjar124 said:
He's talking about PA color... lol That's what everyone is talking about lately...
Click to expand...
Click to collapse
yes, its in OP.
jassycliq said:
yes, its in OP.
Click to expand...
Click to collapse
molesarecoming color tweak has different revisions, his latest release is called BLUEHOLO. I didnt know which one you implemented.
Sent from my Blenzderz 9000
---------- Post added at 07:54 PM ---------- Previous post was at 07:52 PM ----------
scratch that.. latest one is now 4th rev halfbreed
Can you link me? I had recently checked in their github and didn't see anything new.
jassycliq said:
Can you link me? I had recently checked in their github and didn't see anything new.
Click to expand...
Click to collapse
Link
Updated
reboot, reboot, reboot, reboot and more with the update. I have AOKP Official
AW: [Kernel]FrankenKernel
You need to flash the rest kernel from faux( you find it in faux thread opener) than Franken Kernel, this will work for me.
Nexus 4 Tapatalk
Wow. This kernel is packed with features. I just flashed it now. I'll report back with battery in a day. Nice job!
Sent from my Nexus 4 using xda premium
will test and report back
what settings do you recommend ? any governor over the others ?
CheesyNutz said:
will test and report back
what settings do you recommend ? any governor over the others ?
Click to expand...
Click to collapse
I like ondemand and intellidemand governors. I/O I like is sio. I would also recommend UC'ing to 1113MHz.
Sent from my Nexus 4 using xda premium
android88 said:
I like ondemand and intellidemand governors. I/O I like is sio. I would also recommend UC'ing to 113MHz.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
thanks im still new to the quadcore .... do i set all cores to the same gov ? or what
Modded Mirage
Hi All,
Here is the latest kernel I am using which fits my needs.
This will be always synced with MiRaGe and I will add more feature If I need or highly requested from community.
- Synced with latest MiRaGe kernel
- init.d support
- Stratosk's DT2W
- A lots of camera fixes
- Undervolt interface
- Faux123's Dynamic FSync Control
- added busybox
- added mpdfake to resolve touchboost messages
Download:
http://forum.xda-developers.com/devdb/project/?id=3426#downloads
Installation:
fastboot flash boot boot<ver>.img
Please leave your comments below.
Special thanks to;
@stratosk
@mrg666
@faux123
@bedalus
Thanks,
XDA:DevDB Information
Modded MiRaGe, a Kernel for the Google Nexus 4
Contributors
ihancioglu, ihancioglu, mrg666
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 2
Beta Release Date: 2014-04-03
Created 2014-03-25
Last Updated 2014-04-04
First comment for future use
aosp or cm based?
and 2nd for future fun
AOSP based kernel and tested on stock rom
I have a dream: a dream that one day, a developer, even someone new to the game, will come along and make an optimized stock kernel, i.e. a kernel with stock mpdecision, but with various optimizations that make it faster. I have high hopes for this kernel, please make my dream come true. Don't make another frankenstein-kernel.
i will test your build and report back.
Updated to v0.0.5
Changes;
- KGSL updates
- Reworked at L2 bus speed optimizations (more responsive now)
- Power efficient workqueue patch
- Simple GPU governor added / enabled by default
- GPU undervolt a little bit to reduce heat
Please test If you interest and let me know.
Thanks,
Hi!
These are my first cycle results with version 0.0.1 and stock rom. I am gladly impressed.
Not hooked to any wifi APs just 3G.
A zip file would be helpful so we could flash it through recovery
Sent from my Nexus 4 using xda app-developers app
fluffier said:
Hi!
These are my first cycle results with version 0.0.1 and stock rom. I am gladly impressed.
Not hooked to any wifi APs just 3G.
A zip file would be helpful so we could flash it through recovery
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your results.
I think battery will be better with v5 as well as smoother. Please let me know GPU performance as well If you are playing games.
I can prepare the zip file in next versions. Also you can flash my boot images via Flashify without enter even Recovery
Thanks,
Unable to download new version
message deleted
Hi,
I am not playing any GPU intensive games. Thank you for the tip about Flashify Will report back with v5 results.
Hi there!
These are my results with v5, not hooked to any APs just 3G. As you can see SOT has gone down and i am pretty sure the use i gave to the phone was the same as when i had v1.
I am going back to v1 to see if my previous results stand.
Sent from my Nexus 4 using xda app-developers app
fluffier said:
Hi there!
These are my results with v5, not hooked to any APs just 3G. As you can see SOT has gone down and i am pretty sure the use i gave to the phone was the same as when i had v1.
I am going back to v1 to see if my previous results stand.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I think the reason of this, highest L2 speed for 1026Mhz which is touch boost freq. I just decreased a bit for 1026Mhz.(in v11) Performance is in between v1 and v5 but battery stays much longer like v1.
v11;
- L2 bus speed decreased for 1026Mhz for better battery life
- Synced with Linux 3.4.85
Thanks,
hello @ihancioglu.. if its not a bother could u please provide future versions with any-kernel updater for us custom rom users, as some roms have some modifications in the ramdisk which would be removed by flashing the boot.img.
thanks
Hello!
Using v11 i got some random reboots. It also happened with the other versions but only at the end of the battery cycle and so i thought it was due to the battery finishing even though the indicator still showed 4% or the like. This time the reboots happened pretty often.
Sent from my Nexus 4 using xda app-developers app
fluffier said:
Hello!
Using v11 i got some random reboots. It also happened with the other versions but only at the end of the battery cycle and so i thought it was due to the battery finishing even though the indicator still showed 4% or the like. This time the reboots happened pretty often.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Hi my friend,
Thanks for your reports!
I also realize some random reboots with v11 which causes a bug on slub.c.
I don't have much time for now. So I created a new version with Mirage backend. This is completely stable. You can use it safely.
I will continue my project as soon as have free time.
Thanks,
jjblaster3 said:
hello @ihancioglu.. if its not a bother could u please provide future versions with any-kernel updater for us custom rom users, as some roms have some modifications in the ramdisk which would be removed by flashing the boot.img.
thanks
Click to expand...
Click to collapse
Okay I will create a version with any kernel updater method for you.
Thanks,
apatal said:
I have a dream: a dream that one day, a developer, even someone new to the game, will come along and make an optimized stock kernel, i.e. a kernel with stock mpdecision, but with various optimizations that make it faster. I have high hopes for this kernel, please make my dream come true. Don't make another frankenstein-kernel.
i will test your build and report back.
Click to expand...
Click to collapse
The default mpdecision is the worst inefficient/bloated code I would like to have in such an optimized kernel. That is why I have removed it along with touchboost, dcvs, run_queue_stats. I have developed MiRaGe with the same mindset you describe: optimized stock kernel.
Can I request f2fs support? Patches are linked here.
mrg666 said:
The default mpdecision is the worst inefficient/bloated code I would like to have in such an optimized kernel. That is why I have removed it along with touchboost, dcvs, run_queue_stats. I have developed MiRaGe with the same mindset you describe: optimized stock kernel.
Click to expand...
Click to collapse
Ahh, now that you put it that way....
ihancioglu said:
Okay I will create a version with any kernel updater method for you.
Thanks,
Click to expand...
Click to collapse
i appreciate it buddy.. thanks
This is a kernel for Cyanogen Mod 12.1, which is based on the EvoMix kernel by Alx31TLse, olivieer and SuperHanss (full credits to them). It is compiled by a Linaro 4.9.3 toolchain, which was optimized for Cortex A9 CPUs (thanks to Christopher83). It has a focus on stability, performance, endurance and overclock-ability (roughly in that order).
It uses the original ramdisk of the installed kernel (thanks to osm0sis), for maximum compatibly in the long run and instant adaptability to most source changes of CM. For now, it probably only works with the very latest unofficial CM12.1 built by qsnc (http://forum.xda-developers.com/showpost.php?p=58006383&postcount=1), due to the introduction of new sensor drivers! It should now works with other CM12.1 based ROMs, like crDroid and PAC, too. Please don't report bugs to qsnc, if you are using this kernel!
Features:
CPU: over/under-clock 1728MHz-192 MHz possible
governors: ondemand(plus), intelliactive, wheatley, ElementalX, ...
GPU: over/under-clock 487MHz-27MHz
governors: simple, performance, powersave, ondemand, conservative
File-systems: ext2/3/4, F2FS, exFAT, NTFS
Schedulers: noob, deadline, row, cfq, bfq, sio, fiops, zen, vr
intelli-plug hot-plugger and power saver (disable MPDecision first!)
Voltage Control (OC/UV)
Sound Control 3.x
poweramp controls (loudness enhancements)
screen colour tweaks
full NEON support
KSM support (Kernel Samepage Merging)
multicore power saver (recommended: enabled)
multirom compatibility
...
Performance: about 10% faster than original CM12.1-kernel with same settings, and some additional 20% speed by using maximum over-clocked frequencies (use at your own risk, every device is different!)
Configuration: Kernel Adiutor (https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor) or PerformanceControl 2.2.6 (http://forum.xda-developers.com/devdb/project/?id=600#downloads)
Install: just flash the attached zip with CyanogenMod Recovery, TWRP (http://forum.xda-developers.com/xpe...very-twrp-2-8-7-0-pollux-polluxwindy-t3187811) or CWM
Install a custom recovery first! The simple CyanogenMod Recovery, which comes with most ROMs, is pretty useless anyway..
Uninstall: re-flash the complete ROM (just re-flashing the original kernel is not enough!)
Sources: https://github.com/EvoMix/kernel_apq8064 (to obtain the defconfig: run "unpigz -cd /proc/config.gz")
Special thanks to Alx31TLse for his help and permission to post it!
Changelog:
2015-08-23:
rebuild using latest optimized Linaro 4.9.4 compiler by Christopher83
re-signed zip-file in order to make it compatible to file signature verification
refuses now to be installed by CyanogenMod Recovery
2015-06-13:
added Pollux version (use official nightly or recent unofficial build)
fixed bug in Sound Control's loudness enhancement, that only one speaker worked
removed inteli-active governor, due to random reboots
2015-05-31:
enhanced boot speed and file-system performance
buggy auto-hotplugger removed
reintroduction of CM's MPDecision (re-flash CM12.1 first, before installation!)
2015-05-28:
initial release
IF INSTALLATION FAILS: If the kernel installation is not working (i.e. installation takes less than 5 seconds and you don't see the new bootlogo), reflash latest ROM, reboot into recovery and try to install the kernel again!
XDA:DevDB Information
EvoMix Kernel for CyanogenMod 12.1, Kernel for the Sony Xperia Tablet Z
Contributors
BlackAfghan, Alx31TLse, olivieer and SuperHanss
Source Code: https://github.com/EvoMix/kernel_apq8064
Kernel Special Features: CM12.1 EvoMix kernel, compiled by a Linaro toolchain, which supports OC/OV, intelli-plug, Sound Control, NTFS, exFAT, F2FS, NEON, KSM, ...
Version Information
Status: Stable
Just installed latest unofficial CM12.1 built by qsnc and this kernel. Seems great so far! Boots a lot faster and kritika plays faster!
I'm trying the overcloacking with Kernel Adiutor set to 1728MHz, I've to 3C widgets installed to monitor temperature and such. Great job!
May seem a bit offtopic but how is the combination intelliplug-ondemandplus?
I think i get some lag with this but it may be a placebo
pangiotis24 said:
May seem a bit offtopic but how is the combination intelliplug-ondemandplus?
I think i get some lag with this but it may be a placebo
Click to expand...
Click to collapse
First, I also used this combination, but experienced some lag, too. It is not necessary to enable intelliplug and I'm not sure if it does any good, since hot-plugging is handled by auto_hotplug. Actually it is not even included in the original EvoMix kernel.
I'm now using only intelliactive, which seems to keep the frequencies low most of the time, while producing only minimal lag.
But maybe it is really a matter of believe..
Teella said:
I'm trying the overcloacking with Kernel Adiutor set to 1728MHz, I've to 3C widgets installed to monitor temperature and such. Great job!
Click to expand...
Click to collapse
The over-clocking capabilities of the EvoMix kernel are rather conservative. I personally use it with maximum CPU and GPU frequencies and even a general -50mV under-voltage, and it seems to be perfectly stable. But no guarantee, every device is different!
Thanks for Kernel !
Multirom Patch inclusive ?
phillipssat said:
Thanks for Kernel !
Multirom Patch inclusive ?
Click to expand...
Click to collapse
Yes, I think so. But please try it out and confirm if it works, since I have not tested it!
BlackAfghan said:
First, I also used this combination, but experienced some lag, too. It is not necessary to enable intelliplug and I'm not sure if it does any good, since hot-plugging is handled by auto_hotplug. Actually it is not even included in the original EvoMix kernel.
I'm now using only intelliactive, which seems to keep the frequencies low most of the time, while producing only minimal lag.
But maybe it is really a matter of believe..
Click to expand...
Click to collapse
Traced the cause.After some time with intelliplug+ondemandplus cores 2,3,4 are permanently disabled.Now i am on intelliactive.Very good so far
I've been using Wheatley and OC 1728 for couple days now. No lag, no heat issues, everything is just peachy!
Hi! Can I use this kernel on my sgp321 Pollux? Tried to flash but get error.
Pollux build will be released later...
New build in first post!
pangiotis24 said:
Traced the cause.After some time with intelliplug+ondemandplus cores 2,3,4 are permanently disabled.Now i am on intelliactive.Very good so far
Click to expand...
Click to collapse
Could you please retry it with the new version?
bgx said:
Hi! Can I use this kernel on my sgp321 Pollux? Tried to flash but get error.
Click to expand...
Click to collapse
If you, or anybody else, is able to re-flash the original CM12.1 kernel via fastboot (in case something goes wrong) and is willing to beta-test, write me a PM!
Yes its kexec patched, but we need to make tab z official to multirom app support, problem is...im running out of time, full time job, 10 months old baby ...kernel is time consumer, thanks to BlackAfgan to maintaining it.
More goodies to come
Tapatatrached from my Yuga
So apparently my tablet hates me. I can't get this kernel to actually flash for ****. I'm using the 5/27 CM 12.1 from the OP. Tried both versions of the kernel. It acts as if it flashes but is much too fast and the kernel version is the same. TWRP 2.8.5.0 from the OP link too.
EDIT: Nevermind I guess. Moved it to the root of the internal and renamed it to a shorter filename and it pushed it properly. No idea what was going on.
DarkStarr said:
So apparently my tablet hates me. I can't get this kernel to actually flash for ****. I'm using the 5/27 CM 12.1 from the OP. Tried both versions of the kernel. It acts as if it flashes but is much too fast and the kernel version is the same. TWRP 2.8.5.0 from the OP link too.
Click to expand...
Click to collapse
Try to format /system, reflash CM 12.1, reboot into recovery again, then flash the latest kernel, please.
Alx31 said:
Yes its kexec patched, but we need to make tab z official to multirom app support, problem is...im running out of time, full time job, 10 months old baby ...kernel is time consumer, thanks to BlackAfgan to maintaining it.
More goodies to come
Tapatatrached from my Yuga
Click to expand...
Click to collapse
Great! Thanks for your excellent work. I wish you all the best for your family! They are more important than any device..
BlackAfghan said:
Try to format /system, reflash CM 12.1, reboot into recovery again, then flash the latest kernel, please.
Click to expand...
Click to collapse
Yea I had done that. It only worked after moving it. I also renamed it at the same time so I dunno which fixed the issue.
DarkStarr said:
Yea I had done that. It only worked after moving it. I also renamed it at the same time so I dunno which fixed the issue.
Click to expand...
Click to collapse
I had the same problem, especially when I flashed an already flashed kernel. I never found the actual reason, but at one point it started to work perfectly all the time..
This is due the pretty complicated process of splitting the original kernel of and recreating the new one in real time, on the device. Normally the developer does this on his PC, and releases a directly flashable combination of the actual kernel and a custom ramdisk.
If other people have the same problem persistently, I may publish an conventional kernel. Please report!
Does this work on "[Rom][UB][5.1.x][SGP311]☆Dirty Unicorns v9.3☆ Unofficial +EvoMix Kernel" rom??
So i tested the latest version.I use intelliplug+intelliactive
No issues so far.Intelliplug is shutting down cores faster which will propably save some juice
Also feels a little colder than before when gaming(asphalt 8)
This is the Q&A thread for Helium.
You don't know where to post something? This schema will help you.
Questions about the kernel (Does it have ****?) > here
Problems you faced, and/or their solutions > here
Weird problems I could be able to solve > the development thread
Things I should read/know > the development thread
Questions that can be answered by any user (not only by me) > here
Miscellaneous posts > here
In a nutshell, if you have to post something that I have to read, post it in the development thread, otherwise use this thread.
I will not read this thread at all. Or maybe I'll check it every now and then
Mention me if I should read something.
Testing helium in temasek, for now all working right and cpu freq. goes to 1728Mhz. Very similar to last stock cm kernel but with usb fast charging :good:
I have a question @tommons (or sombody): Why do you include KSM? In Tangerine kernel it made the device laggy, increasing the power consumption due to the continous work of cpu cores and soon many of us saw that this feature wasn't good to our Xperia Sp. I always leave it off and better overall performance is achieved.
In init.d options of Kernel adiutor we can see the entry 01tangerine. Delete this entry is the same that going to /system/etc/init.d? I suppose that is.
BTW, great work and thanks for your dev time.
Alvichone said:
Testing helium in temasek, for now all working right and cpu freq. goes to 1728Mhz. Very similar to last stock cm kernel but with usb fast charging :good:
I have a question @tommons (or sombody): Why do you include KSM? In Tangerine kernel it made the device laggy, increasing the power consumption due to the continous work of cpu cores and soon many of us saw that this feature wasn't good to our Xperia Sp. I always leave it off and better overall performance is achieved.
In init.d options of Kernel adiutor we can see the entry 01tangerine. Delete this entry is the same that going to /system/etc/init.d? I suppose that is.
BTW, great work and thanks for your dev time.
Click to expand...
Click to collapse
KSM (in v2, UKSM) is there as an option. Nobody forces you to use it It uses more power but the result is a better RAM management.
Yes you can delete 01tangerine from Kernel Adiutor too.
Trying v2 with carbon 5.1.1 seems everything OK..good work man ;D
Sent from my Xperia SP using Tapatalk
Waiting eagerly to have it fully working on CM13.. Please @Tomoms hurry up :silly:
MizoSome said:
Waiting eagerly to have it fully working on CM13.. Please @Tomoms hurry up :silly:
Click to expand...
Click to collapse
Wait more or less 70 hours and you'll have it
I have tangerine 9.1 and CM12.1 on my device. Which steps i need to follow in order to have Helium?
Overclocking?
Can you build a overclocking option from this Kernel, In Tangerine Kernel my Cellphone is stucked on 1444 MHz on all gorvenors, Can you do it? A Overclocking to 1.94 GHz or more ?
pilger said:
I have tangerine 9.1 and CM12.1 on my device. Which steps i need to follow in order to have Helium?
Click to expand...
Click to collapse
Flash the stock boot.img of your CM build (if you have CM+Addons, it would be better if you flashed the boot.img of the Addons you have installed on your device), enter TWRP, install Helium.
Or, in an easier way, next time you update your CM nightly flash Helium instead of Tangerine!
JhonesMillionBR said:
Can you build a overclocking option from this Kernel, In Tangerine Kernel my Cellphone is stucked on 1444 MHz on all gorvenors, Can you do it? A Overclocking to 1.94 GHz or more ?
Click to expand...
Click to collapse
Overclock needs some work and I'm very busy at the moment. Frequency fixes will come very very soon. In the mean time you can flash v2.1, which hasn't got any issues with frequencies.
@Tomoms I am not able to install v2.2 on cm 12.1 using twrp it says unpacking kernel and nothing happens I have to hard reboot.anyone know how to solve this?
Helium Kernel v3
On Helium Kernel v3 the frequency is stucked on 1458 MHz on both cores on all gorvenors and I/O Schedulers.. :crying: :crying:
Image Link: http://tinypic.com/r/vcv2ft/9
JhonesMillionBR said:
On Helium Kernel v3 the frequency is stucked on 1458 MHz on both cores on all gorvenors and I/O Schedulers.. :crying: :crying:
Image Link: http://tinypic.com/r/vcv2ft/9
Click to expand...
Click to collapse
Good! Well, actually that's bad, but I expected it. Will fix ASAP (that is, unfortunately for you, on Sunday/Monday).
Use v2.1, it doesn't have problems.
For the others: I remind you that this doesn't mean v3 is buggy. This bug appears only on certain devices confused and mine is one of the "lucky" ones. So the best thing to do is to try v3 and see if you're lucky or unlucky. Hopefully, the bug will be fixed with v3.1.
JhonesMillionBR said:
On Helium Kernel v3 the frequency is stucked on 1458 MHz on both cores on all gorvenors and I/O Schedulers.. :crying: :crying:
Image Link: http://tinypic.com/r/vcv2ft/9
Click to expand...
Click to collapse
Same here
Sent from my Xperia SP using Tapatalk
Tomoms said:
Good! Well, actually that's bad, but I expected it. Will fix ASAP (that is, unfortunately for you, on Sunday/Monday).
Use v2.1, it doesn't have problems.
For the others: I remind you that this doesn't mean v3 is buggy. This bug appears only on certain devices confused and mine is one of the "lucky" ones. So the best thing to do is to try v3 and see if you're lucky or unlucky. Hopefully, the bug will be fixed with v3.1.
Click to expand...
Click to collapse
It will be that the kernel comes out today ? I'm anxious
JhonesMillionBR said:
It will be that the kernel comes out today ? I'm anxious
Click to expand...
Click to collapse
It's out
Helium Kernel v3.1
Tomoms said:
It's out
Click to expand...
Click to collapse
CPU frequency table finally fixed? Needs testing.
Test: Yes, All gorvernors and I/O Schedulers is working with 1944 MHz, Tested!
Thank you, Tomoms
Is TRIM support planned? I think that it is essential for device with such slow flash memory.
As for now I'm using heavily customized Tangerine 9.2 + last Xenon HD which gives great performance, but has issues (inaccurate GPS, big lag after locking the screen, touchscreen not working couple times a week and a few more). Tested latest CM12.1 + Helium 3.1 for few hours and it looks promising, but feels slower than much more bloated Xenon HD + Tk9.2 (used since September) possibly due lack of TRIM support.
michuroztocz said:
Is TRIM support planned? I think that it is essential for device with such slow flash memory.
As for now I'm using heavily customized Tangerine 9.2 + last Xenon HD which gives great performance, but has issues (inaccurate GPS, big lag after locking the screen, touchscreen not working couple times a week and a few more). Tested latest CM12.1 + Helium 3.1 for few hours and it looks promising, but feels slower than much more bloated Xenon HD + Tk9.2 (used since September) possibly due lack of TRIM support.
Click to expand...
Click to collapse
You can use the command line utility called fstrim or mount the partitions with the "discard" option. The latter way is more difficult because it requires unpacking the kernel, the ramdisk, and then repacking everything.
Swap crashing problem is resolved in v3.2?
Tomoms said:
You can use the command line utility called fstrim or mount the partitions with the "discard" option. The latter way is more difficult because it requires unpacking the kernel, the ramdisk, and then repacking everything.
Click to expand...
Click to collapse
I think that it was my mistake - I cannot remember if I enabled root before issuing TRIM - shame on me
I am using Trimmer utility and running it resulted in instant execution without returning trimmed size in gigabytes pointing that either root was not enabled or TRIM was not supported. Judging by your reply I can assume that TRIM is supported so I think that I'll make second attempt to CM12.1 when touchscreen issue is fixed* or CM13 when camera will be working.
* I just read that @Adrian DC fixes has been merged in 3.2! I will check that kernel as soon as I can! :angel:
RealONE Kernel for Moto X 2014!
Only CM or based CM versions like RR,NX...
And only Android M too
Features:
Compiled with UBERTC 4.9.4
Optimized Entropy
FauxSound
Power Suspend
Improved accuracy of MultiCore
CRC disabled by default( 30% extra perfomance on I/O)
Swappiness reduced to 15%
UnderClock CPU (268 Mhz)
Activated Power Eficcient Worqueues
#Governors:
ZZmove
Intellidemand
Smartmax Extreme Power Saver (eps)
Intelliactive
#Hotplugins:
MSM_Hotplug
Intelliplug
Alucard
MSM MP Decision
#I/O Schreduler:
Added Zen
All credits goes to Michel Borges
Thanks Leonardo Augusto
Thanks Faux123
Source of the Kernel on github:
https://github.com/RealOne-Kernel/RealOne-Victara-Kernel
could you give instructions on how to flash a kernel in our device?
marquesini said:
could you give instructions on how to flash a kernel in our device?
Click to expand...
Click to collapse
This is not the place for that.
jlink38 said:
This is not the place for that.
Click to expand...
Click to collapse
oh, ok.
then I dunno, pm me an external link for that ? i really want to try change the kernel, but don't want to mess up the device, i could google it but preffer a recommendation of a tutorial by someone who understands more about it than i dunno.
anyway, thanks.
Hello, your kernel is very good, very fluid and good battery consumption in CM13, it would be possible in the future to add support KCAL?, can change the saturation, contrast, etc., thank you for your work.
[DEV][PATCH] KCAL - Advanced color control for Qualcomm MDSS 8x10/8x26/8974/8084/8939
Great kernel. Has improved battery life quite a bit !
Thanks!! Testing on CM13... Looks good
Good battery consumption.
Sent from my XT1095 using Tapatalk
Great kernel so far, thanks for making a custom kernel for 6.0, I've been waiting for one.
Would it be possible for you to add support for DriveDroid to your kernel?
http://forum.xda-developers.com/showthread.php?t=2196707
https://play.google.com/store/apps/details?id=com.softwarebakery.drivedroid&hl=en
Thxx , give me more feedbackk ! And I'll take a look at suggestions at the weekend guys !!
Can't wait to see what this can do..bout to flash now!!!
some people say they are taking random reboots .. anyone had ? maybe a log for me ?
MichelBorgess said:
some people say they are taking random reboots .. anyone had ? maybe a log for me ?
Click to expand...
Click to collapse
Yes i had that issue, but i reflashed cm, I'll retry tomorrow and get you some logs (hopefully i have time, I'm doing my finals now...).
MichelBorgess said:
some people say they are taking random reboots .. anyone had ? maybe a log for me ?
Click to expand...
Click to collapse
I'll try.its happened a few times to me
---------- Post added at 08:47 AM ---------- Previous post was at 08:39 AM ----------
Where can I post my logcat?
http://pastebin.com/ try this
Your kernel its a dream hahahaha I was waiting for a kernel with fauxsound since I've bought this phone. So, first of all, thank you very much for your kernel and we appreciate your work and your time spent with this kernel. But lets get to the facts:
1) In RR 5.6.0 your kernel cause bootloop;
2) In CM13 (specifically 2015-12-12 build) I had a lot of random reboots and the sound (specifically Play Music and Deezer) sometimes was cracking or just not played;
3) In CrDroid I had the same thing in CM13 but the rom has some serious bugs, so we don't count it;
4) In Nexus Experience 10.0.4 I just had ONE random reboot (take note: the first boot, so lets blame the instability of the rom) and, since then, my phone is working completely perfect.
5) With kernel auditor all of my preferences are saved and sticked after a reboot (in Nexus Experience 10.0.4)
Note: All of the Roms was fresh installed, wiped everything (including internal storage) then installed ROM->GAPPS (NX GApps in Nexus Experience and OpenGApps in the other roms)->KERNEL
Maybe with some work in your kernel and in the newer roms, this phone will gain some fresh air!
Thank you again!
Ps.: not an american guy, so please, I'm sorry for any english mistake
victor19 said:
Your kernel its a dream hahahaha I was waiting for a kernel with fauxsound since I've bought this phone. So, first of all, thank you very much for your kernel and we appreciate your work and your time spent with this kernel. But lets get to the facts:
1) In RR 5.6.0 your kernel cause bootloop;
2) In CM13 (specifically 2015-12-12 build) I had a lot of random reboots and the sound (specifically Play Music and Deezer) sometimes was cracking or just not played;
3) In CrDroid I had the same thing in CM13 but the rom has some serious bugs, so we don't count it;
4) In Nexus Experience 10.0.4 I just had ONE random reboot (take note: the first boot, so lets blame the instability of the rom) and, since then, my phone is working completely perfect.
5) With kernel auditor all of my preferences are saved and sticked after a reboot (in Nexus Experience 10.0.4)
Note: All of the Roms was fresh installed, wiped everything (including internal storage) then installed ROM->GAPPS (NX GApps in Nexus Experience and OpenGApps in the other roms)->KERNEL
Maybe with some work in your kernel and in the newer roms, this phone will gain some fresh air!
Thank you again!
fix in next build
Click to expand...
Click to collapse
Yo guyss ! I redid the kernel, and apparently restarts stopped .. is still simpler, more 'll keep updating
zzmoove
intelliplug
IO Zen
https://www.androidfilehost.com/?fid=24340319927533603
I don't understand this thread. The OP has a different username the one above who has released v2? And why hasn't this been moved to 'original development'?
floepie said:
I don't understand this thread. The OP has a different username the one above who has released v2? And why hasn't this been moved to 'original development'?
Click to expand...
Click to collapse
I just asked for Vinicius post for me , since I had not yet allowed to post in section ...