Related
After only four day of having this phone i managed to brick it. I would really like to know if its fixable or if i have a really nice paper weight. Im stuck on a boot loop, I was half way through flashing a rom when it suddenly shut off. Now it will not boot up. I can load into the bootlader but when i try to go into recovery it just sends me to fastboot. When i restart the phone i can see the old recovery (TWRP)for just an instant but then the screen goes completely black. If i plug in to my pc, nothing happens my computer detects it but it says y device is damaged nd it cant identify it. PLEASE HELP Am i out of luck?
Ive looked around but i couldnt seem to find anyone with the same problem as me (Sprint Variant)
Good news it's not bricked i would put this question on the rom thread someonethere sshould be able to help
There's a Sprint One forum as well, so hopefully you found a ROM on there!
http://forum.xda-developers.com/forumdisplay.php?f=2215
jaythenut said:
Good news it's not bricked i would put this question on the rom thread someonethere sshould be able to help
Click to expand...
Click to collapse
I really hope so because on a college budget i cant afford another phone D:
Seen this in a couple of other places. Seems certain recoveries are possibly becoming currupted during flashing a new ROM.
What you need to do it get back into fastbboot, and....
fastboot erase recovery
fastboot erase cache
the re-flash your recovery, boot into recovery, full wipe and reflash your ROM.
wnp_79 said:
Seen this in a couple of other places. Seems certain recoveries are possibly becoming currupted during flashing a new ROM.
What you need to do it get back into fastbboot, and....
fastboot erase recovery
fastboot erase cache
the re-flash your recovery, boot into recovery, full wipe and reflash your ROM.
Click to expand...
Click to collapse
When i go back into fastboot my only options are
-Bootloader
-Reboot
-Reboot bootleader
-Power down.
I appriciate the help!
i suggest you contact with HTC customservices to repair this problem.
Muquita said:
When i go back into fastboot my only options are
-Bootloader
-Reboot
-Reboot bootleader
-Power down.
I appriciate the help!
Click to expand...
Click to collapse
Can you flash recovery in fastboot ?
the safest thing to do is relock and use a matching RUU to get back to stock
Muquita said:
When i go back into fastboot my only options are
-Bootloader
-Reboot
-Reboot bootleader
-Power down.
I appriciate the help!
Click to expand...
Click to collapse
Your phone isn't bricked. There are two tools in this forum that can help you. One is made by hasoon2000(I think that's his user name), and the other is jwtool(I think). Use them to help to flash a recovery if you don't know how to use fastboot.
DynamicRam said:
Can you flash recovery in fastboot ?
the safest thing to do is relock and use a matching RUU to get back to stock
Click to expand...
Click to collapse
I cannot. My computer wont recognize it. I re-installed the driver and it Says my device malfunctioned.
Im giving up hope here.
Muquita said:
I cannot. My computer wont recognize it. I re-installed the driver and it Says my device malfunctioned.
Im giving up hope here.
Click to expand...
Click to collapse
dont give up
Sent from my HTC One
Muquita said:
I cannot. My computer wont recognize it. I re-installed the driver and it Says my device malfunctioned.
Im giving up hope here.
Click to expand...
Click to collapse
Edit: Just got done typing the stuff below and saw you can't connect to your device in fastboot? What do you mean by re-installed driver?
Don’t worry, as long as you can still get into hboot your phone is not completely bricked!
The fastboot commands I referred to need to be carried out on your laptop/pc when you phone is connected in fastboot.
Can I assume that as you have already unlocked bootloader and flashed a custom recovery you are already familiar with this and have your computer set up for fastboot commands?
(Apologies if you already know some of this, best not to skip parts out though!)
I’d start with downloading a fresh version of your chosen recovery, and place it in your fastboot directory ready. I’d also do the same with your ROM.
Like you have already done, boot into fastboot. Connect your phone to your pc, and the red text should change to ‘Fastboot USB’.
Then open up command prompt and get to your fastboot directory. (On Windows 7 you just find that folder in Explorer, hold shift and right-click, then choose ‘Open command window here’.)
To check your pc is talking to your phone, type ‘fastboot devices’. You should get a device serial number back if all is well.
Then type ‘fastboot erase cache’ and hit enter.
Then type ‘fastboot erase recovery’ and hit enter.
Then type ‘fastboot flash recovery [name of recovery].img’ and hit enter.
Then type ‘fastboot reboot recovery’ and hit enter.
Hope fully you should successfully boot into recovery now. Once in recovery, mount USB storage and copy over your fresh ROM. Choose to do a full wipe including cache and dalvik, then reflash your ROM.
Reboot.
Let me know how this goes.
cronus101 said:
Your phone isn't bricked. There are two tools in this forum that can help you. One is made by hasoon2000(I think that's his user name), and the other is jwtool(I think). Use them to help to flash a recovery if you don't know how to use fastboot.
Click to expand...
Click to collapse
I used the hasoon2000 to flash TWRP earlier, but my problems is that my pc wont recognize my phone. When i plug it in it and try to re-flash it it cant find it. When i check my devices it shows up as an android device but it says the drivers are damaged. if i could get it to read it i think i should be eable to reflash somethint.
I APPRICIATE ALL THIS HELP. i really am trying to be as specific as possible :fingers-crossed:
Hey so just a thought and experience I have had with all my HTC phones is when you see that quick glimpse of the TWRP recovery screen then it disappears to an empty black screen......you are sometimes still in a form of recovery but during your Rom flash something (i don't know for sure) changed and it doesn't show the screen only black. So with that long explanation out of the way....have you tried once the screen goes black the
"adb devices "
Mine whenever in this situation would return the output of serial number and recovery so then you can push or sideload the Rom and boot into the system at which point your fastboot drivers will finally be recogniZed.....
Hope this helps a little
Sent from my HTC EVARE_UL using xda app-developers app
Muquita said:
I used the hasoon2000 to flash TWRP earlier, but my problems is that my pc wont recognize my phone. When i plug it in it and try to re-flash it it cant find it. When i check my devices it shows up as an android device but it says the drivers are damaged. if i could get it to read it i think i should be eable to reflash somethint.
I APPRICIATE ALL THIS HELP. i really am trying to be as specific as possible :fingers-crossed:
Click to expand...
Click to collapse
I'd say the next step is to re-install your drivers in the SDK. Open up your Android SDK and reinstall them. In Windows Device Manager, find your connected device (probably now with an exclamation mark on it) and right click on it and select 'Update Driver'.
(Assuming you are using Windows 7 here?)
http://developer.android.com/tools/extras/oem-usb.html
Muquita said:
When i go back into fastboot my only options are
-Bootloader
-Reboot
-Reboot bootleader
-Power down.
I appriciate the help!
Click to expand...
Click to collapse
when you are in fastboot, connect your phone using the usb cable, and when you see "fastboot" written in red turned into "fastboot usb" or something like this, do the commands below using cmd window of course :
1) fastboot erase recovery
2) fastboot erase cache
3) fastboot flash recovery recoveryname.img
4) fastboot erase cache
Let us know when you fix it
Good Luck
wnp_79 said:
I'd say the next step is to re-install your drivers in the SDK. Open up your Android SDK and reinstall them. In Windows Device Manager, find your connected device (probably now with an exclamation mark on it) and right click on it and select 'Update Driver'.
(Assuming you are using Windows 7 here?)
http://developer.android.com/tools/extras/oem-usb.html
Click to expand...
Click to collapse
(Win8 but the procces is identical.) All my drivers are up to date. Still no love.
On the dev forum is a thread that includes all the latest drivers (including an app to remove older drivers.)
Find that thread, download the drivers and bmp and driver removal tool. Remove drivers with tool, install the new drivers, reboot, connect phone and see if 'adb devices' finds anything.
Also make sure you're using the latest adb.
Sent from my HTC One using xda app-developers app
thneed said:
Hey so just a thought and experience I have had with all my HTC phones is when you see that quick glimpse of the TWRP recovery screen then it disappears to an empty black screen......you are sometimes still in a form of recovery but during your Rom flash something (i don't know for sure) changed and it doesn't show the screen only black. So with that long explanation out of the way....have you tried once the screen goes black the
"adb devices "
Mine whenever in this situation would return the output of serial number and recovery so then you can push or sideload the Rom and boot into the system at which point your fastboot drivers will finally be recogniZed.....
Hope this helps a little
Sent from my HTC EVARE_UL using xda app-developers app
Click to expand...
Click to collapse
This actually sounds really similar to my situation.. Would you care to be a little more specific on the procedure? noob here.
Tabtoub said:
when you are in fastboot, connect your phone using the usb cable, and when you see "fastboot" written in red turned into "fastboot usb" or something like this, do the commands below using cmd window of course :
1) fastboot erase recovery
2) fastboot erase cache
3) fastboot flash recovery recoveryname.img
4) fastboot erase cache
Let us know when you fix it
Good Luck
Click to expand...
Click to collapse
My pc will not recognize my phone. The drivers are up to date but when i plug it in it says something malfunctioned ?
After installing Vanir, I don't know what went wrong !!! it was freezing then after trying to charge it, it bricked!!!!
I searched the forume and found major two ways
FIRST
RuedasLucas Here :
http://forum.xda-developers.com/showthread.php?t=1932123
i followed the info. correctly and stuck in the same problem the man in the thread have, I am stuck in LG logo
so i tied the second
http://forum.xda-developers.com/showpost.php?p=40174748&postcount=9&nocache=1
and i am stuck in installing " LGmobile Support Tool " because i am in windows 8 and it is not compitable with it. every time trying to install it seems not responding.
so i am stuck now and donot know how to unbrick it !!! no one tell me to set up win 7 because i donot have one
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
SimonTS said:
The LG support tool works fine on my Windows 8 64-bit version. Look for the thread on 'Flashing a KDZ with pictures' and follow it to the letter.
Click to expand...
Click to collapse
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
kessaras said:
did u install gapps ? vanir installation never had a problem. about windows 8 x64 i can confirm the support tool is working because i had them some months ago ( now im on ubuntu x64 ).
and its not a good idea if on some little mistake u try go back to stock. the reason u tried flash vanir was to go away from stock. if u flash back to stock then in a few days will want to flash again a custom. so try again and do it right !
also dont take off battery. no need. maybe this battery trick is history. i never did that. i just long pressed power to reboot and then i just pressed a few times the vol down ( not hold ).
Click to expand...
Click to collapse
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
SimonTS said:
Try disabling any anti-virus first just to make sure that's not interfering. I've never heard of the proces freezing there before.
Click to expand...
Click to collapse
Ok is the tool take some time to load if internet connection is not good ?!!
arrivals18 said:
Ok is the tool take some time to load if internet connection is not good ?!!
Click to expand...
Click to collapse
It shouldn't make any real difference, no.
arrivals18 said:
Actually i did this before posting from that thread
http://forum.xda-developers.com/showthread.php?t=2069723
between step 3 and 4 it give me " app. not responding "
Click to expand...
Click to collapse
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
arrivals18 said:
i didn't catch it. But if u mean i reflash vanir, The mobile is " dead now !!!! " so i must unbrick to any firmware then reflash
Click to expand...
Click to collapse
mmmmmm.... if at the end u cant do anything and since, propably, your bootloader is unlocked , u can reinstall the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
SimonTS said:
It shouldn't make any real difference, no.
Click to expand...
Click to collapse
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
[email protected] said:
You did disable the Modem, right? And sometimes, the process seems to take a little long. You have to be patient.
Yep. every thing ok as u see.
Sent from my Optimus 4X HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
kessaras said:
mmmmmm.... if at the end u cant do anything and since, probably, your bootloader is unlocked , u can re-install the recovery using the adb ( use cmd: adb reboot bootloader and then, when u are there , hit: adb install [recovery zip file path/name] ). eh the rest u know them so u dont need to use any kdz and tire urself with that boring procedure
Click to expand...
Click to collapse
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Yep. This may happened, when i opened the bootloader i use the code 3845#*880#>Boatloader>check boatloader> Unlock,
soi knew that it's unlocked. Am i wrong ? Guys i done both the first and the second method and all stuck in LG logo
in the first i used V20C_00.kdz and did the rights steps and also stuck !!!! so what now !!!!!!!!!!!!!!11
Click to expand...
Click to collapse
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
arrivals18 said:
Ok i already installed win. 7 and installed the tool that take really short time.
i connect the phone to usb in the mode and choose in the tool " recover from wrong update " it downloaded nearly 573 mb. and installed it in the phone, and when the phone restarts, the phone sticks in LG logo . SO what now !!!!!!!
Click to expand...
Click to collapse
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
RuedasLocas said:
Try to flash V20A with LG Flash Tool and to unlock the bootloader this:
http://www.4shared.com/rar/HFf4newq/LGO4X-UNLOCK-BOOTLOADER.html
Hope it helps, I unlock mine with that, tooked me a few tries...
Click to expand...
Click to collapse
OK look what i did :
1- connect device with usb cable and holding vol- till it get s/w update
2-when pressing adb reboot bootloader command it gives me unknown error
3- fastboot oem unlock : it gives me device not found
Also tried :
1- connect device to usb cable with holding power+ vol+ to recover mode
2-when pressing adb reboot bootloader command its ok
3- fastboot oem unlock : it gives me FAILED (command write failed (Unknown error))
finished. total time: 0.587s
SimonTS said:
The first thing to do if it sticks on the LG Logo is to boot into the LG recovery and do a factory reset - just to make sure. You often have to do this after flashing a new KDZ anyway.
Click to expand...
Click to collapse
HOW ?!!!!!!!!
when pressing power with vol+ it gives me the message " This mode is for data backup at service center. After removing and reattachment of battery press power key to reboot and keep using phone" so what how can wipe date/factory reset ?
Power and vol-, not+
Flying_Bear said:
Power and vol-, not+
Click to expand...
Click to collapse
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
arrivals18 said:
yep yep yep it's done and now i see the rom >>> now can i root unlock bootloader flash to vanir or not ?
Click to expand...
Click to collapse
i told you earlier at my post here , that you dont need to flash kdz and go back to stock if ur final goal is a custom rom. u could reinstall recovery using adb bootloader. nevermind -_- u just do things harder for u. bootloader is unlocked u cant unlock the unlocked. bootloader isnt locking again when u just force the stock rom in. there is another procedure u must do to lock it. u can install recovery ( if u havent ) and just install a custom rom
EDIT: you dont need this anymore but ill explain.
adb is used to force files into the device. its a way to communicate with the phone using the pc. u can use the adb to install whatever u like but if u are not sure that the thing u are trying to install is ok for the device, then u will have a problem.
so , since your bootloader is already unlocked, you can go in adb bootloader and force the recovery in.
open cmd:
Lets say i use the teamwin recovery. ill rename it to be easy and save it to desktop. my file is: recovery.zip
open cmd as administrator and go to desktop: cd .....[path to ur desktop]
1. adb start-server
2. adb reboot bootloader
3. fastboot fash recovery recovery.zip
thats it. 3 commands is 10 seconds work. u dont need to go back to stock rom to install a custom rom.
So im stuck with my nexus with no OS... after flashing pure shamu it booted to just a password box... I input my password and it said i had corrupt data. I hit reset... wiped phone... all files GONE... Now what do i do. I cant mount to put recovery on.... I cant do anyting with this phoen right now... anyone had this happen... If so what steps to remedy?
Sounds like you need to try and fastboot the original google files, nuke and repave....
flash the stock img then start again
Flashing stock as we speak... was hoping another optino.... but after years of doing this I kinda know better... live and learn
hell
Hi there, i'm new with Android and my problem is the same as yours on my Nexus 6.
after a failed root, i accidentally deleted all data. Now i'm without OS, boot locked, and the TWRP recovery has been deleted too (when i select recovery mode, it come back to the fastboot menu). i cannot use "fastboot oem unlock"
I don't know what i have to do . I really need help, i just want to restart from the beggining like official rom ...
sry for bad english.
asphalte7 said:
Hi there, i'm new with Android and my problem is the same as yours on my Nexus 6.
after a failed root, i accidentally deleted all data. Now i'm without OS, boot locked, and the TWRP recovery has been deleted too (when i select recovery mode, it come back to the fastboot menu). i cannot use "fastboot oem unlock"
I don't know what i have to do . I really need help, i just want to restart from the beggining like official rom ...
sry for bad english.
Click to expand...
Click to collapse
Try using these fastboot commands:
fastboot format userdata
fastboot format cache
Evolution_Freak said:
Try using these fastboot commands:
fastboot format userdata
fastboot format cache
Click to expand...
Click to collapse
done, what can i do after this ?
it says : created filestystem.... OKAY (with a lot of parameters)
asphalte7 said:
done, what can i do after this ?
it says : created filestystem.... OKAY (with a lot of parameters)
Click to expand...
Click to collapse
Should be able to boot twrp now.
but i have to unlock first ... my device is locked
asphalte7 said:
but i have to unlock first ... my device is locked
Click to expand...
Click to collapse
you cant unlock it without booting up and enabling allow oem unlocking in the developer options
asphalte7 said:
but i have to unlock first ... my device is locked
Click to expand...
Click to collapse
If you can boot to TWRP recovery, then you can ADB push a ROM to recovery and boot it.
Edit: Sorry, I missed the fact that TWRP had been deleted too.
asphalte7 said:
but i have to unlock first ... my device is locked
Click to expand...
Click to collapse
No, if you can boot to TWRP, as @rootSU said, you can move a ROM to internal and get up and running. Then you can go about unlocking.
Evolution_Freak said:
No, if you can boot to TWRP, as @rootSU said, you can move a ROM to internal and get up and running. Then you can go about unlocking.
Click to expand...
Click to collapse
and how can i boot twrp ? i'm like john snow, i know nothing
i only have a console, and a nexus - which cannot exit the "bios"
asphalte7 said:
and how can i boot twrp ? i'm like john snow, i know nothing
i only have a console, and a nexus - which cannot exit the "bios"
Click to expand...
Click to collapse
Power off the device. Once completely shut down, hold power and volume down until bootloader screen appears. Then use the volume keys to select recovery. Then push power to select.
from your original post, it says your not running twrp anymore. have you tried just letting the phone try to boot up? have you tried reflashing twrp to your phone via fastboot. id try, and if its successful, id push a rom to my phone then. if not, try flashing a factory img.
asphalte7 said:
and how can i boot twrp ? i'm like john snow, i know nothing
i only have a console, and a nexus - which cannot exit the "bios"
Click to expand...
Click to collapse
Evolution_Freak said:
Power off the device. Once completely shut down, hold power and volume down until bootloader screen appears. Then use the volume keys to select recovery. Then push power to select.
Click to expand...
Click to collapse
Or, if you are still in fastboot, issue this command > fastboot reboot recovery
Evolution_Freak said:
Power off the device. Once completely shut down, hold power and volume down until bootloader screen appears. Then use the volume keys to select recovery. Then push power to select.
Click to expand...
Click to collapse
as i said before, when twrp has been deleted, the Recovery mode is useless : when i hit it, it instantly return to bootloader screen
asphalte7 said:
as i said before, when twrp has been deleted, the Recovery mode is useless : when i hit it, it instantly return to bootloader screen
Click to expand...
Click to collapse
Then I'm afraid you may be stuck. A RMA may be in your future if no one else can offer a solution.
simms22 said:
from your original post, it says your not running twrp anymore. have you tried just letting the phone try to boot up? have you tried reflashing twrp to your phone via fastboot. id try, and if its successful, id push a rom to my phone then. if not, try flashing a factory img.
Click to expand...
Click to collapse
i left my phone during half an hour on the "Google" screen ....
i cannot flash twrp with fastboot because its locked..
or which command i have to type to install it ?
how can u flash a factory img ? i dowloaded the official 5.1 rom for nexus 6
asphalte7 said:
i left my phone during half an hour on the "Google" screen ....
i cannot flash twrp with fastboot because its locked..
or which command i have to type to install it ?
how can u flash a factory img ? i dowloaded the official 5.1 rom for nexus 6
Click to expand...
Click to collapse
flashing twrp..
fastboot flash recovery recoveryname.img
and flashing a factory img is done while the phone is in its bootloader. there are instruction how here on xda. but to be honest, i dont know if that will work. where did you buy your n6 from btw?
Hey everyone I'm looking here as my last resort before sending my phone back to Motorola.
Bought a Nexus 6 from motorola uk which was delivered yesterday, switched phone on and all the Google apps on the phone updated, then had a notification OTA to download and install android 5.1 which I did, towards the end of the install process I had an error with the green android and a red exclamation mark.
I powered the device off with the power button and it turned back on and ever since it says "Android is starting" "Optimizing app 1 of 125" once it goes through all the apps it gets to the android boot screen then just goes back to the "Android is starting" "Optimizing app 1 of 125" over and over and over. (Infinite bootloop)
Pointers: The phone is not unlocked or rooted as I'm a noob its just fresh out the box, also I never opened/unlocked the developer options.
I have tried various recovery mode fixes, wiping cache and wiping all data and then rebooting the device with no luck.
Is there anyway I can hook my N6 up to my computer and fix this with a tool kit etc? I'm willing to try but I'd need basic instructions and reassurance it wouldn't muck up my warranty if it didn't work as my only other option is to exchange for a new device.
Any help, advice etc would be hugely appreciated. Thanks
Markh2001 said:
Hey everyone I'm looking here as my last resort before sending my phone back to Motorola.
Bought a Nexus 6 from motorola uk which was delivered yesterday, switched phone on and all the Google apps on the phone updated, then had a notification OTA to download and install android 5.1 which I did, towards the end of the install process I had an error with the green android and a red exclamation mark.
I powered the device off with the power button and it turned back on and ever since it says "Android is starting" "Optimizing app 1 of 125" once it goes through all the apps it gets to the android boot screen then just goes back to the "Android is starting" "Optimizing app 1 of 125" over and over and over. (Infinite bootloop)
Pointers: The phone is not unlocked or rooted as I'm a noob its just fresh out the box, also I never opened/unlocked the developer options.
I have tried various recovery mode fixes, wiping cache and wiping all data and then rebooting the device with no luck.
Is there anyway I can hook my N6 up to my computer and fix this with a tool kit etc? I'm willing to try but I'd need basic instructions and reassurance it wouldn't muck up my warranty if it didn't work as my only other option is to exchange for a new device.
Any help, advice etc would be hugely appreciated. Thanks
Click to expand...
Click to collapse
Read the guide on how to fastboot flash a factory image. No toolkit necessary.
Would you mind posting a link to a guide? I forgot to add that I don't want my phone to become rooted by trying to fix this issue, I want to keep it stock like it was, also does not have developer options enabled stop me from going further.
Sorry for the questions I'm a noob to this and quite anxious.
AndroidSlave said:
Read the guide on how to fastboot flash a factory image. No toolkit necessary.
Click to expand...
Click to collapse
Would you mind posting a link to a guide? I forgot to add that I don't want my phone to become rooted by trying to fix this issue, I want to keep it stock like it was, also does not have developer options enabled stop me from going further.
Sorry for the questions I'm a noob to this and quite anxious.
Can anyone still please help! I'm a noob and so need instructions on what to do! Please!
Markh2001 said:
Can anyone still please help! I'm a noob and so need instructions on what to do! Please!
Click to expand...
Click to collapse
If you connect the phone to the pc is it recognised in bootloader mode? Do you have adb installed onyour pc?
gee2012 said:
If you connect the phone to the pc is it recognised in bootloader mode? Do you have adb installed onyour pc?
Click to expand...
Click to collapse
All foreign language to me what your saying, trying my best to self learn right now. I'm downloading the adroid SDK and extracting the files, really want to sort this myself. Any pointers to getting into bootloader mode? And adb on the PC?
Markh2001 said:
All foreign language to me what your saying, trying my best to self learn right now. I'm downloading the adroid SDK and extracting the files, really want to sort this myself. Any pointers to getting into bootloader mode? And adb on the PC?
Click to expand...
Click to collapse
Look here http://forum.xda-developers.com/showthread.php?t=2588979 for easy adb installation. Read this too http://forum.xda-developers.com/nexus-6/general/how-to-nexus-6-one-beginners-guide-t2948481.
To get into bootloader mode power down the device and after that press volume down + power. Here`s a guide to setup the sdk/adb http://www.redmondpie.com/how-to-set-up-android-adb-and-fastboot-on-windows-tutorial/.
gee2012 said:
If you connect the phone to the pc is it recognised in bootloader mode? Do you have adb installed onyour pc?
Click to expand...
Click to collapse
I've made the fastboot adb folder on my PC and attached my phone whilst it was in bootloader mode, I types in the command box adb devices and there is no list of attached devices.
I presume this is because I didn't enable developer options or USB debugging?
Markh2001 said:
I've made the fastboot adb folder on my PC and attached my phone whilst it was in bootloader mode, I types in the command box adb devices and there is no list of attached devices.
I presume this is because I didn't enable developer options or USB debugging?
Click to expand...
Click to collapse
When in bootloader mode type : fastboot devices
-Edit- just read that your bootloade is still locked so i`am afraid there is nothing you can do to fix the issue as you cannot flash firmware with a locked bootloader. Best is to claim warranty because of a software issue while updating.
gee2012 said:
When in bootloader mode type : fastboot devices
-Edit- just read that your bootloade is still locked so i`am afraid there is nothing you can do to fix the issue as you cannot flash firmware with a locked bootloader. Best is to claim warranty because of a software issue while updating.
Click to expand...
Click to collapse
Sorry to be a noob but how do I do this? Is this on the PC I presume?
Markh2001 said:
Sorry to be a noob but how do I do this? Is this on the PC I presume?
Click to expand...
Click to collapse
There is nothing you can do with a locked bootloader, claim warranty/RMA
gee2012 said:
When in bootloader mode type : fastboot devices
-Edit- just read that your bootloade is still locked so i`am afraid there is nothing you can do to fix the issue as you cannot flash firmware with a locked bootloader. Best is to claim warranty because of a software issue while updating.
Click to expand...
Click to collapse
Thought this would be the case, I went into adb fastboot and typed in fastboot devices and its showing some letters and numbers next to fastboot on screen if that helps.
In the future I presume I should make sure to enable developer options first so I can get out if this mess?
Also would it be best when I get my new n6 just to sideload the latest update marsmellow by getting the factory image from the Google website? Last question can I skip from 5.0 straight to 6.0 sideloading or do I have tobdo it one at a time?
Thanks for trying to help matey
Markh2001 said:
Thought this would be the case, I went into adb fastboot and typed in fastboot devices and its showing some letters and numbers next to fastboot on screen if that helps.
In the future I presume I should make sure to enable developer options first so I can get out if this mess?
Also would it be best when I get my new n6 just to sideload the latest update marsmellow by getting the factory image from the Google website? Last question can I skip from 5.0 straight to 6.0 sideloading or do I have tobdo it one at a time?
Thanks for trying to help matey
Click to expand...
Click to collapse
Next time enable usb debugging and ENABLE OEM UNLOCK, both in developer options. You can flash the latest firmware available directly in fastboot by flashing the individual img files.
Here is a link to setup adb/platform-tools https://www.google.nl/url?sa=t&rct=...orial/&usg=AFQjCNGolazOWoMssTikMpokJ6TtwEND5A.
gee2012 said:
There is nothing you can do with a locked bootloader, claim warranty/RMA
Click to expand...
Click to collapse
This is getting very weird now as I just typed into the adb fastboot window : fastboot oem unlock and its giving me a message on my screen to click yes and unlock the bootloader?
Markh2001 said:
This is getting very weird now as I just typed into the adb fastboot window : fastboot oem unlock and its giving me a message on my screen to click yes and unlock the bootloader?
Click to expand...
Click to collapse
Well click the power button and in the next screen scroll down with the volume button to select yes and push power.
gee2012 said:
There is nothing you can do with a locked bootloader, claim warranty/RMA
Click to expand...
Click to collapse
It says this on my Nexus 6 phone screen.
Unlock bootloader?
If you unlock the bootloader, you will be able to install custom operating system on this phone.
A custom OS is not subject to the same testing as the original OS, and can cause your phone and installed applications to stop working properly.
To prevent unauthorized access to your personal data, unlocking the bootloader will also delete all personal data from your phone (a "factory data reset".)
Press the volume up/down buttons to select yes or no. Then press power button to continue.
Yes (Unlock bootloader, may void warranty)
No. ( Do not unlock bootloader and restart phone)
Markh2001 said:
It says this on my Nexus 6 phone screen.
Unlock bootloader?
If you unlock the bootloader, you will be able to install custom operating system on this phone.
A custom OS is not subject to the same testing as the original OS, and can cause your phone and installed applications to stop working properly.
To prevent unauthorized access to your personal data, unlocking the bootloader will also delete all personal data from your phone (a "factory data reset".)
Press the volume up/down buttons to select yes or no. Then press power button to continue.
Yes (Unlock bootloader, may void warranty)
No. ( Do not unlock bootloader and restart phone)
Click to expand...
Click to collapse
Click yes, see my above post
gee2012 said:
Click yes, see my above post
Click to expand...
Click to collapse
Okay but will I be able to relock and put it back to the way it was? Can you please stay around to help me do this step by step?! I'd appreciate it a million
Markh2001 said:
Okay but will I be able to relock and put it back to the way it was? Can you please stay around to help me do this step by step?! I'd appreciate it a million
Click to expand...
Click to collapse
Sure, but first we have to get the phone working again,
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Andris85 said:
Hi there.
I wanted to root a Redmi 10S device. Bootloader was also opened. The flash went during fastboot mode, then after the fastboot reboot command, the device restarted, but it only shows "Redmi" and the word android at the bottom. I tried to access recovery and fastboot mode, but powr+volD only restarts the device and only the Redmi inscription is visible.
I don't know what they call this state in which the device is.
If there is a suitable link on the forum, I would appreciate it.
Click to expand...
Click to collapse
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
gurtnyi said:
Hi there!
What did you flash excatly?
I mean, did you flash the whole phone, or just a patched boot image?
Click to expand...
Click to collapse
Just the boot.ini. but I think this would make fastboot mode work. But it's not working
tutibreaker said:
reflash stock and done to enter in fastboot mode press power and volD keep presing volD until the phone start in fastboot mode and flash it
Click to expand...
Click to collapse
What should I use to reflash? Mi flash? This is the NS
Yes... I probably mixed up the boot file in the downloads folder and not the correct received flash
Click to expand...
Click to collapse
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
gurtnyi said:
Then, you don't have to flash the whole phone again, just flash back the original image, and try rooting with twrp and magisk zip file (rename the apk file from magisk.apk to magisk.zip, and then flash it in twrp)
If you can't install twrp, or something went wrong, take a full backup from your phone (like using google's backup service, and Miui backup--> it 'll save the backup to internal storage/miui/backup/AllBackup) and then ypu can reflash the phone with mi flash tool, but don't lock the bootloader back, and after flash, you shuold enable oem unlock in developer settings.
One quick question:
Did you enable oem unlocking in developer settings, before trying to flash the modified image?
Click to expand...
Click to collapse
yepp, enable oem unlock. But fastbootmode is required for all operations. But fastboot mode doesn't work.
What do you mean it doesn't work?
Can't enter into fastboot mode?
gurtnyi said:
What do you mean it doesn't work?
Can't enter into fastboot mode?
Click to expand...
Click to collapse
Can't enter fastboot mode. The device only shows "Redmi" lettering. If fatboot worked, I could have done it already. power+volume down, the device just restarts and shows "redmi".
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
gurtnyi said:
Hmm..
And if you holding the volD and power buttons together for a longer time?
Like a min, or sth
I had a similar situation, but after a few tries it went into fastboot mode
Click to expand...
Click to collapse
it just restarts, as long as I press and hold volume down+power, if I don't press it, it just shows the redmi text
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
gurtnyi said:
I apologise, but I 've currently ran out of ideas. If I can find any solution, I 'll post an answer about it.
Click to expand...
Click to collapse
TXH
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Pegelaar_NL said:
Hi there the forgive my on my bad english and text.
The Only thing u can do is restoring the firmware by using brom mode, Look it up or follow the steps i'll give u....
First keep in mind brom works best Without the batary conected . So remove the thin cover plate at the back u can loosen it with heat , after removing the cover move all screws and remove the housing so u can disconect the batary at the mainboard .
Next u will have to install the Vcom drivers according your chipset mediatek etc.
For the Vcom drivers and install of it u can follow https://www.hovatek.com/forum/thread-16640.html
U must download or allready have a firmware file in fastboot format , Open up SP Flash tool and go to optionsd and select connection, click the w/o battery option and close it. Open your scatter file and than click on download . Insert your phone wile holding your volume down or up , with my device a redmi note 10s it was the up and down to getter for it was flashing the rom. this should flash your device back with a working fastboot and working rom.
Hope u will succeed...
Greetsss
Click to expand...
Click to collapse
Yep, this guy here 's got the point. If you can't flash with sp flash tool because auth fail, there's a method to bypass it.
You can find the tutorial here: https://www.getdroidtips.com/bypass-mediateks-sp-flash-tool-authentication-protection/
I also got some help from this guy's post, many thanks to him too.
https://forum.xda-developers.com/t/...ad_da_fail-0x7d4-2004-for-mtk-phones.3692259/
Let us know how it's going with it! ;D
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buytoday there is a lot of devices for gaming like rog phone and red magic
Click to expand...
Click to collapse
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Andris85 said:
I can unbrick the device at any time. There is another problem. An incorrect boot file is probably being copied. After TWRP you will never enter android again. But TWRP also only loads up to the subtitle. I tried a lot of methods. Now I will try google p ex. android and make it root.
But, if someone can recommend a device intended for gaming, but easy to root, then I will buy one
Click to expand...
Click to collapse
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
tutibreaker said:
today there is a lot of devices for gaming like rog phone and red magic, but is you are looking for a "gaming phone" in low or mid-range you are just wasting your money
Click to expand...
Click to collapse
If you can root it easily, then the expensive one is good for me! Normal root was not available for typical gamer phones for years. If I buy something for which root may not be available, then I'm wasting my money...
gurtnyi said:
There's a tutorial, that helped me installing twrp correctly to this phone, I'll link my post about this.
https://forum.xda-developers.com/t/twrp-on-android-12.4522273/
Click to expand...
Click to collapse
I will look today