Related
I am downloading the 722 MB update over OTA right now. Check for software updates in system settings.
root
delphimon said:
I am downloading the 722 MB update over OTA right now. Check for software updates in system settings.
Click to expand...
Click to collapse
did you have your phone rooted? I can´t get the update, I get "There is no updates available for your device at the moment".
jla2024 said:
did you have your phone rooted? I can´t get the update, I get "There is no updates available for your device at the moment".
Click to expand...
Click to collapse
No, the phone has never been rooted. Running stock MF3 with no changes. Checked for update and it was there (still downloading).
delphimon said:
No, the phone has never been rooted. Running stock MF3 with no changes. Checked for update and it was there (still downloading).
Click to expand...
Click to collapse
My phone is rooted and it showed up!!!
Finished installing. 4.3 I537UCUBML2 confirmed
how i can install this rom on mi s4 active carrier Telcel
someone who can upload some zip to flash or créate .tar file
ok so i got the update to download then went to intall and it came up that the update was interrupted could that be because of having rooted my phone?
htcman724 said:
ok so i got the update to download then went to intall and it came up that the update was interrupted could that be because of having rooted my phone?
Click to expand...
Click to collapse
Can somebody pull the update file off their phone for the rest of the community? You have to do this before you install update. Basically what the phone does is download the update to a temporary directory on your phone and then installs the update. Once updated the phone then deletes the update file.
Your phone will download the update file.
It will ask you to install the update, DON'T press Cancel and DON'T press Update, instead hit the home button (don't worry it will ask you again later).
Open your root file manager, go up to the root directory and go to /cache/fota/ and copy the zip file from your phone to your computer. This zip file is the update file.
Upload the file and post the link for the community
Wallow in all the "Thanks" you will receive
IMPORTANT: You must grab the update file before your phone updates or the file will be deleted.
EDIT: Information about copying the update file can be found in this post by @thatbigmoose
htcman724 said:
ok so i got the update to download then went to intall and it came up that the update was interrupted could that be because of having rooted my phone?
Click to expand...
Click to collapse
Had the same problem. Do I have to return to stock and un-root to install the update?
Devo7v said:
Can somebody pull the update file off their phone for the rest of the community? You have to do this before you install update. Basically what the phone does is download the update to a temporary directory on your phone and then installs the update. Once updated the phone then deletes the update file.
Your phone will download the update file.
It will ask you to install the update, DON'T press Cancel and DON'T press Update, instead hit the home button (don't worry it will ask you again later).
Open your root file manager, go up to the root directory and go to /cache/fota/ and copy the zip file from your phone to your computer. This zip file is the update file.
Upload the file and post the link for the community
Wallow in all the "Thanks" you will receive
IMPORTANT: You must grab the update file before your phone updates or the file will be deleted.
EDIT: Information about copying the update file can be found in this post by @thatbigmoose
Click to expand...
Click to collapse
im redownloading it now as soon as its done i'll upload it
treystegall said:
Had the same problem. Do I have to return to stock and un-root to install the update?
Click to expand...
Click to collapse
I had the same problem, as well. Went through download, then restarted. Seemed to restart overly quickly, then saw that I was still on 4.2.2. Is there a log file somewhere that I can look at?
I will try and pull it off my wife's phone tonight!
Has anybody on MI2 been notified of an update? I'm guessing not since MI2 was a pre-release so it would be interesting to see if someone has.
Devo7v said:
Has anybody on MI2 been notified of an update? I'm guessing not since MI2 was a pre-release so it would be interesting to see if someone has.
Click to expand...
Click to collapse
I am on the MI2 leak rooted no OTA notification . Says up to date
I'm guessing I won't see OTA if I am on Tmo's network??
We are not left behind!
I can confirm, from Indiana, that the 4.3 update has come to the S4Active OTA.
Just gave it a try and I got the update downloading even though I'm on Tmo's network! Yes!! Wasn't working before cause I remember I removed KnoxAgent.apk and wssyncmldm.apk but I put those back and it's all good
Devo7v said:
Can somebody pull the update file off their phone for the rest of the community? You have to do this before you install update. Basically what the phone does is download the update to a temporary directory on your phone and then installs the update. Once updated the phone then deletes the update file.
Your phone will download the update file.
It will ask you to install the update, DON'T press Cancel and DON'T press Update, instead hit the home button (don't worry it will ask you again later).
Open your root file manager, go up to the root directory and go to /cache/fota/ and copy the zip file from your phone to your computer. This zip file is the update file.
Upload the file and post the link for the community
Wallow in all the "Thanks" you will receive
IMPORTANT: You must grab the update file before your phone updates or the file will be deleted.
EDIT: Information about copying the update file can be found in this post by @thatbigmoose
Click to expand...
Click to collapse
ok so i went there and there was no zip file. tryed to reinstall it and it failed again. has anyone gotten it to install?
htcman724 said:
ok so i went there and there was no zip file. tryed to reinstall it and it failed again. has anyone gotten it to install?
Click to expand...
Click to collapse
I looked for the file as well and there was no zip located in cache\fota
---------- Post added at 10:25 PM ---------- Previous post was at 10:17 PM ----------
moppegaard said:
I looked for the file as well and there was no zip located in cache\fota
Click to expand...
Click to collapse
nevermind, I'm not rooted so I can't access the file
I'll have it uploaded within the hour to Dropbox unless someone beats me to it. I'm at 50% right now.
Upload took a little longer than I thought. Also file is .cfg and not a .zip from the OTA. But it will still run on phone through update. I'll post link and screenshots as soon as the file uploads.
Hello I need to send my phone for repairs, and so I've been trying to install the stock firmware. I've managed to downgrade all the way to b126, and I've received an OTA to b133SP01 but when i try to update it through the OTA it says there are no updates available. I have previously changed the stock Rom and recovery of this phone so I don't know if that's the issue.
Also can anyone tell me if under Settings -> about phone -> certification I can change the country it displays, on mine it says Serbia with a triangle on top, i think that has changed with a local update i did (downloaded from this forum), so does anyone know how to change this?
Honer6000 said:
Hello I need to send my phone for repairs, and so I've been trying to install the stock firmware. I've managed to downgrade all the way to b126, and I've received an OTA to b133SP01 but when i try to update it through the OTA it says there are no updates available. I have previously changed the stock Rom and recovery of this phone so I don't know if that's the issue.
Also can anyone tell me if under Settings -> about phone -> certification I can change the country it displays, on mine it says Serbia with a triangle on top, i think that has changed with a local update i did (downloaded from this forum), so does anyone know how to change this?
Click to expand...
Click to collapse
Do you currently have a stock Rom and recovery installed on your phone?
TheSproker said:
Do you currently have a stock Rom and recovery installed on your phone?
Click to expand...
Click to collapse
Yes. I have reinstalled both the stock Rom and recovery though
Honer6000 said:
Yes. I have reinstalled both the stock Rom and recovery though
Click to expand...
Click to collapse
Well if you can't download it via Ota then download it from the Internet, then create a folder on your SD card called "dload". Copy the update there, turn off your phone and perform a forced upgrade by holding all three buttons down.
TheSproker said:
Well if you can't download it via Ota then download it from the Internet, then create a folder on your SD card called "dload". Copy the update there, turn off your phone and perform a forced upgrade by holding all three buttons down.
Click to expand...
Click to collapse
Yes, but i need it to be able to update OTA, i managed to go from b127 to b133 OTA but it stopped there. I will try to update to b609 localy and see if i can OTA from there.
If you need to send your phone for repairs, than any official version is good B126 B133 B609 or B852.
My phone says Serbia too under certificates, so I don't think that this is something to worry about.
Just make sure that your bootloader is locked (green) and hope that they'll accept it for repairs.
I've resolved the mistery of missing apps after update to 370 or 371. you need to change your drawer from settings
How to do:
Settings> Home Style> Drawer
tested by me all apps like calc and co will be appear
Thank you for the suggestion, but calc and so on (I cannot even know the list of missing apps) are nowhere to be found, even in Drawer view!
I just updated from L31C432B161 to 371.
Any ideas?
Thank you in advance,
Eric.
UltrashRicco said:
Thank you for the suggestion, but calc and so on (I cannot even know the list of missing apps) are nowhere to be found, even in Drawer view!
I just updated from L31C432B161 to 371.
Any ideas?
Thank you in advance,
Eric.
Click to expand...
Click to collapse
I don't know, this was my experience. after upgrade home was without some apps and i've resolved in that way.
According to me you have to downgrade to MM (there is a guide in the forum) and to upgrade with the OTA that was released for all, (so don't do it manually). good luck
cmax24 said:
I don't know, this was my experience. after upgrade home was without some apps and i've resolved in that way.
According to me you have to downgrade to MM (there is a guide in the forum) and to upgrade with the OTA that was released for all, (so don't do it manually). good luck
Click to expand...
Click to collapse
Thanks! I did however proceed with the OTA update (not manually through SC card), but it seems that there are several versions of the update. One is 1.25GB and is missing some apps and gives bluetooth problems, another version is 1.99GB and seems to be OK!
We are talking about it here: https://forum.xda-developers.com/showpost.php?p=71683348&postcount=32
UltrashRicco said:
Thanks! I did however proceed with the OTA update (not manually through SC card), but it seems that there are several versions of the update. One is 1.25GB and is missing some apps and gives bluetooth problems, another version is 1.99GB and seems to be OK!
We are talking about it here: https://forum.xda-developers.com/showpost.php?p=71683348&postcount=32
Click to expand...
Click to collapse
Yes, i did 1.99 and all is ok, i know that 1.25gb is only the update package and 1.99gb is update + data_full package
cmax24 said:
Yes, i did 1.99 and all is ok, i know that 1.25gb is only the update package and 1.99gb is update + data_full package
Click to expand...
Click to collapse
Would you be willing to share your 1.99GB file? You should be able to find it in internal storage\HwOUC\xxxx\update.app
Thanks!
You Can find It bere https://forum.xda-developers.com/hu...android-7-emui-5-0-vns-l-cb360-links-t3565117
cmax24 said:
You Can find It bere https://forum.xda-developers.com/hu...android-7-emui-5-0-vns-l-cb360-links-t3565117
Click to expand...
Click to collapse
Thank you, but I believe it is not the same: on the forum we have on one side the update.app and on the other side the data_full, and I believe maybe you haveone 1.9GB file with the full package? Maybe I am mistaken!
You Need the data_full
Yes I do, but I thought it would be cool if someone could upload the whole package.
I will try to install the data_full through dload on SD card.
Thank you,
UltrashRicco said:
Yes I do, but I thought it would be cool if someone could upload the whole package.
I will try to install the data_full through dload on SD card.
Thank you,
Click to expand...
Click to collapse
Didn't work for me...still the same did it worked for you ?
Kcetin20 said:
Didn't work for me...still the same did it worked for you ?
Click to expand...
Click to collapse
I did not try in the end... I tried to dload B370 but it does not work because "incompatible version". I should try to OTA or dload B371 and then dload data_full, but I guess it will not work since it is for B370, not B371 and I am fed up with restoring all data on my phone for now!
I think I will way a bit until the official OTA comes out or someone else finds a solution. :/
I downgraded from B161 to B160 and was able to download B370 (1.9GB).
Downloading as I speak.
Regards,
UltrashRicco said:
Yes I do, but I thought it would be cool if someone could upload the whole package.
I will try to install the data_full through dload on SD card.
Thank you,
Click to expand...
Click to collapse
1.99 package are two separate files. when the program is downloading 1.99 it is downloading 2 files. so it's the same for you to flash only the data_full
cmax24 said:
1.99 package are two separate files. when the program is downloading 1.99 it is downloading 2 files. so it's the same for you to flash only the data_full
Click to expand...
Click to collapse
Thank you @cmax24, I solved my problem by rolling back from B161 to B160 through dload, then MyCare found B370 (1.99GB) and... voilà! I was not able to take a look at the downloaded file(s), as I proceeded with the update immediately and the files were consequently deleted. :/
Thanks for your help!
Update data missing
I've updated the honor 8 with the Huawei firmware finder and installed a 1.3Gb emui 5 rom.
But it's missing many features and apps and has a Bluetooth issue...
The build no shows NRD90M test keys.
The updater app is also missing...
I tried installing the hw_resources package using dload method but it's not working...
Please help...
My phone is not rooted and doaent have any custom recovery installed.
What should I do ?
install FIRMWARE FINDER for Huawei
install Firmware Finder for huawei fro android market, there are FULL OTA update in there just select your phone model and it will give you the updated firmware for your phone, it works on my EVA L19-Missing stock apps and camera,bluetooth,themes not functioning- just select 1 step upgrdae ex. from B393 to B394,
-> open firmware finder
-> select phone model
-> select firmware ex. EVAL19C636B394
(make sure to sellect the FULL OTA and not the OTA MF)
-> select check firmware access
-> select with imei
-> then after select GET AN UPDATE THROUGH DNS
-> then select REGISTER UPDATE
after those step, go to setting-> system update
now it will show thats there is new update and just download it, after finishing the download just apply the updated one but before restarting turn off the dns server running in your status bar,
after restaringand installing the update!! WALLAH your phone now is working perfectly.
ernie1989 said:
install Firmware Finder for huawei fro android market, there are FULL OTA update in there just select your phone model and it will give you the updated firmware for your phone, it works on my EVA L19-Missing stock apps and camera,bluetooth,themes not functioning- just select 1 step upgrdae ex. from B393 to B394,
-> open firmware finder
-> select phone model
-> select firmware ex. EVAL19C636B394
(make sure to sellect the FULL OTA and not the OTA MF)
-> select check firmware access
-> select with imei
-> then after select GET AN UPDATE THROUGH DNS
-> then select REGISTER UPDATE
after those step, go to setting-> system update
now it will show thats there is new update and just download it, after finishing the download just apply the updated one but before restarting turn off the dns server running in your status bar,
after restaringand installing the update!! WALLAH your phone now is working perfectly.
Click to expand...
Click to collapse
.
My device is the FRD-L09C185B403
Why haven't I got the Oreo update with EMUI 8 yet...other models of honor 8 seems to have got it.
Is there anyway I can get an update without complex procedures like rooting and flashing.
Straight to the point, has anyone successfully updated to B382?
I've tried via FirmwareFinder, it downloads successfully, but during install it says Unauthorised, removes files, and remains the same.
Trying via the dload/sdcard method, and it gives an error @ 5%, and then prompts to reboot the phone.
Have tried going from B190/202/362/370 but no luck each time. Tried with bootloader unlocked & locked, have since done a factory reset once on 370, and still no progress.
Will remain on B370 for now, B382 appears to only be a security patch, but it would be nice to have the peace of mind being on the latest (for Huawei anyway) patch.
CAN YOU GIVE ME LINK FOR b370 ? I HAVED TO TRY WITH FIRMWARE FINDER BUT NOT WORKING, THANK YOU. and i have a same problem when update B382, i think it's a beta version .
midouban87 said:
CAN YOU GIVE ME LINK FOR b370 ? I HAVED TO TRY WITH FIRMWARE FINDER BUT NOT WORKING, THANK YOU. and i have a same problem when update B382, i think it's a beta version .
Click to expand...
Click to collapse
I actually used Firmware Finder to update to B370. Although initially I was having issues getting to that as well, from B362 both via dload & FF.
Ended up rolling back to B190 (via dload), then using FF went to 362 > 370.
Here's the LINK to the update.zip anyway.
djyoshii said:
I actually used Firmware Finder to update to B370. Although initially I was having issues getting to that as well, from B362 both via dload & FF.
Ended up rolling back to B190 (via dload), then using FF went to 362 > 370.
Here's the LINK to the update.zip anyway.
Click to expand...
Click to collapse
i'll try now, but if i use FF to update B370, i try 3 version B370, but i see only download file =5.78mb, then it downloading and fail to update , thank you !
midouban87 said:
CAN YOU GIVE ME LINK FOR b370 ? I HAVED TO TRY WITH FIRMWARE FINDER BUT NOT WORKING, THANK YOU. and i have a same problem when update B382, i think it's a beta version .
Click to expand...
Click to collapse
midouban87 said:
i'll try now, but if i use FF to update B370, i try 3 version B370, but i see only download file =5.78mb, then it downloading and fail to update , thank you !
Click to expand...
Click to collapse
Check one of the other threads in here on how to update via FF, step by step.
You need to go back out and check for updates again. Full size is def not 5mb.
In order to update to B382 NOW, you need to unlock your bootloader and use TWRP to update it UNLESS you wait till it official launch.
djyoshii said:
Check one of the other threads in here on how to update via FF, step by step.
You need to go back out and check for updates again. Full size is def not 5mb.
Click to expand...
Click to collapse
thanks for help, but i have to try manytime , it's alway show 5.78mb. and i know it fail. i try dload method but still fail to verify at 5%.
jhleo1 said:
In order to update to B382 NOW, you need to unlock your bootloader and use TWRP to update it UNLESS you wait till it official launch.
Click to expand...
Click to collapse
Bootloader unlocked.
update.zip for B382 downloaded.
Is it as simple as flashing that zip in TWRP?
Anything else required? Anything to be aware of?
As mentioned above, I've only updated via dload & FF previously, was not aware of any other method/s.
Thanks
I didn't not tried since bit troublesome for me to backup all data etc. I rather wait for final release. You may try to google this firmware and TWRP method was highlighted. Anyway do it at your own risk.
djyoshii said:
Bootloader unlocked.
update.zip for B382 downloaded.
Is it as simple as flashing that zip in TWRP?
Anything else required? Anything to be aware of?
As mentioned above, I've only updated via dload & FF previously, was not aware of any other method/s.
Thanks
Click to expand...
Click to collapse
b382 is still unofficial, if u insist on installing it try this method:
https://forum.xda-developers.com/p9-plus/how-to/easy-upgrade-to-unapproved-emui-5-update-t3649532
The firmware already approved by Huawei. Just use FF to update will do.
wizix said:
b382 is still unofficial, if u insist on installing it try this method:
https://forum.xda-developers.com/p9-plus/how-to/easy-upgrade-to-unapproved-emui-5-update-t3649532
Click to expand...
Click to collapse
I am getting a nag screen to update to opss27.104-92-2 but I can't because I have rooted the phone. I noticed a similar question about the last update and there was a way to manually do the update. Does anyone know where to get the files for this security update so that I can do a manual install.
Alternative, does anyone know where the file is stored on the phone once it is downloaded? If I can find the file then I can probably unzip it and do a manual install.
Thanks
atomclock said:
I am getting a nag screen to update to opss27.104-92-2 but I can't because I have rooted the phone. I noticed a similar question about the last update and there was a way to manually do the update. Does anyone know where to get the files for this security update so that I can do a manual install.
Alternative, does anyone know where the file is stored on the phone once it is downloaded? If I can find the file then I can probably unzip it and do a manual install.
Thanks
Click to expand...
Click to collapse
You can't unzip it and try to apply it. It doesn't work that way. You either have to wait until a full firmware package with this update in it is released or reflash a stock system that matches the one you're on. You would need to flash the entire stock firmware. Then you can boot back to the system and take the update normally.
madbat99 said:
You can't unzip it and try to apply it. It doesn't work that way. You either have to wait until a full firmware package with this update in it is released or reflash a stock system that matches the one you're on. You would need to flash the entire stock firmware. Then you can boot back to the system and take the update normally.
Click to expand...
Click to collapse
I guess I will have to wait until some is kind enough to post a manual install version.
Thanks
atomclock said:
I guess I will have to wait until some is kind enough to post a manual install version.
Thanks
Click to expand...
Click to collapse
There won't likely be a way to install an update on rooted stock. You have to fastboot flash the firmware you're currently on (to remove modifications to system, boot.img, etc), then take the update. That IS the manual method. It should be stored in /cache. The /cache that's in the root directory of the phone. Which G6 do you have?
madbat99 said:
There won't likely be a way to install an update on rooted stock. You have to fastboot flash the firmware you're currently on (to remove modifications to system, boot.img, etc), then take the update. That IS the manual method. It should be stored in /cache. The /cache that's in the root directory of the phone. Which G6 do you have?
Click to expand...
Click to collapse
When I talked about doing the update the manual way, I was talking about doing it the way it is described in this thread.
https://forum.xda-developers.com/moto-g6/help/security-update-to-opws27-113-45-4-wont-t3818421
Hopefully, someone will extract the relevant files from the update and give instructions on manually doing the update. I really wouldn't call restoring the device to stalk and taking the automated update and then re-rooting the manual way. I would call that the hard way.
atomclock said:
When I talked about doing the update the manual way, I was talking about doing it the way it is described in this thread.
https://forum.xda-developers.com/moto-g6/help/security-update-to-opws27-113-45-4-wont-t3818421
Hopefully, someone will extract the relevant files from the update and give instructions on manually doing the update. I really wouldn't call restoring the device to stalk and taking the automated update and then re-rooting the manual way. I would call that the hard way.
Click to expand...
Click to collapse
That thread literally says install the stock firmware. You have to wait for the entire firmware for the new build to be released. no one is extracting anything from any update package. They are just using the full firmware package in that thread. You just have to wait for the full firmware to be posted on mirrors.lollinet.com the November patch for my G6 play was just posted there yesterday. that's why I asked which version of the G6 you have I will link you to the full firmware.
Or, You just fastboot flash stock, take the update, fastboot TWRP, use TWRP to flash magisk. No data loss, easy peasy.
the only difference in those two ways is taking the update after you flash stock or flashing stock firmware including the update. Either way you have to root your device again.
You can even flash stock with RSDlite using service file.xml instead of flashfile.xml
the file they are flashing with fastboot in that thread is the stock firmware. Just the newer one.
I was browsing for firmware today, the newest build/security patch is available on the lollinet Moto under Ali fw
GotHeart said:
I was browsing for firmware today, the newest build/security patch is available on the lollinet Moto under Ali fw
Click to expand...
Click to collapse
The question is can i use different software channel for my G6? Example 1925-6 to 1925-7 to gain particular service carrier signal