Database Develop

HELP with bricked device honor 4x che2-l12

i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you

Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
Can you boot into bootloader ?
You may change your recovery to the origine one then flash a new ROM

Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
What's the status of your phone?

If you can acces fastboot mode it's ok

Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
If you can enter fastboot mode and download official ROM pack, then you are all good.
Method:
http://forum.xda-developers.com/showpost.php?p=68695798&postcount=2

I need help I have che2-l11 model I was formated my mobile and install twrp.after that I was trying to find Rom but there is no Rom available.but again I was installing stock firmware it's also not installing giving compatibility error I also tried other firmware but non of these firmware working.and currently my mobile is only showing Huawei logo.please help me

kamrangul87 said:
I need help I have che2-l11 model I was formated my mobile and install twrp.after that I was trying to find Rom but there is no Rom available.but again I was installing stock firmware it's also not installing giving compatibility error I also tried other firmware but non of these firmware working.and currently my mobile is only showing Huawei logo.please help me
Click to expand...
Click to collapse
Fastboot method most probably is your only choice now.
Follow this method here:
https://forum.xda-developers.com/showpost.php?p=68695798&postcount=2

Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
Reboot to recovery wit volume up + power button trigger . and then click on reboot button and then select reboot to bootloader. Their you flash system.img , boot.img and cust.img to their partitions. And then reboot . if u understand what I said I will help u further .

A little bit of help needed...
Hi,
I basically did the same mistake as the other guys, unlocked the bootloader and installed twrp, all fine. Then I ***** up by trying to root fellowing a tuto made for the non-Che2-L11 ones.
I have no problem going into TWRP, the bootloader, or the black screen from huawei (witch looks like.. some kind of second recovery ?)
I managed to download the stock software from huawei ( Honor 4X Firmware (Che2-L11, Android5.1.1, EMUI3.1, C636B360, Malaysia)S.zip ) and also managed to download a version of HuaweiUpdateExtractor ( 0.9.9.5 ).
My problem now, is that if I understood correctly, I should extract the image files from the APP from the firmware zip I downloaded from Huawei.
Unfortunatly, there is no HuaweiUpdateExtractor profile for the honor 4x Che2-L11.
There I may need assistance, or guidance.
Does the profile already exists somewhere ?
How can I create my own, is it not too complex ?
Maybe someone already extracted thoses files and could make them available somewhere ?
Or maybe is there any other way to unbrick my phone ?
************************************
EDIT: Nevermind. I managed to extract the files without profiles. I flashed them 3 but nothing really changed.. So.. I'm kinda stuck. no Idea from here.
************************************
************************************
EDIT (of the edit) : Nevermind the previous nevermind ! It actually worked ! Well, kinda.. Seems my new "stock rom" is quite buggy, strangly, but nevertheless, it work Thanks
************************************
Thanks a lot.

Hello
Hello friend, i also have the same problem. My huawei honor 4x che2-l11 stuck on huawei logo i can not unbrick it. if you succsed so plz attach the file you extract to my email plzzzzz.
email: [email protected]
Thanks.

Guide to install Nougat / Emui5 on BTV-DL09

Okay, managed to get Nougat and root for my BTV-DL09. Here is a fast forward tutorial how to do that.
I could only root it by using Magisk, Supersu (even the special emui5 ones) did not work for me.
Files:
ROM: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1224/g490/v78425/f1/full/update.zip (BTV-DL09C233B336)
Data: http://update.hicloud.com:8180/TDS/...full/dualcu/cn/update_data_full_dualcu_cn.zip
TWRP, make sure to use twrp_BTV-DL09_5_greatslon.img : https://androidfilehost.com/?fid=817550096634750327 (thanks to greatslon)
Root: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I came from version BTV-DL09C100B006, this is how I did it:
Bootloader must be unlocked, custom recovery installed (Do not install the one for EMUI5 yet, it won't boot).
Enter recovery by adb reboot recovery
Wipe, reboot recovery
Flash ROM + Data
Flash Magisk Root
Flash Recovery again (will be overwritten by the udate)
Reboot, Done.
Download playstore / vending APK from APKmirror: http://www.apkmirror.com/apk/google-inc/google-play-store/google-play-store-7-6-08-release/ and transfer it on the device.
There is an app called "Downloads" preinstalled (there is pretty much nothing on the tablet, not even a browser after flashing it), you can use that to open/install the play store APK and get things going.
Please make sure you know what you are doing and you know how to recover from a soft brick. I take no responsibility if anything goes wrong.
The version you should have now is BTV-DL09C233B336 with security update from February included.

Thank you very much, and how to downgrade ?

can someone upload a youtube video showing us the the new EMUI5 on this tablet, and give us an overview about the new features and performance?

Beware that:
1) this is a chinese ROM
2) Nougat version 7.0.0
3) if you don't like the downgrade process is difficult
4) if you want to downgrade have to find another ROM!!!

any idea to downgrade please

drlsd said:
any idea to downgrade please
Click to expand...
Click to collapse
You need another ROM, FULL not OTA.
1) extract from the .APP the recovery (both) and boot images
https://forum.xda-developers.com/showthread.php?t=2433454
2) get a build.prop from the ROM you want to install
3) copy the build.prop in the /system folder, overwriting the original: now the old ROM will unlikely boot!
4) go in fastboot mode and flash recovery, recovery2 and boot images
5) copy the update.app in the dload folder
6) reboot and maintain pressed both volume keys to start recovery
7) if you are lucky the recovery will install the ROM.
Of course you will loose all your data (uhm, not even but... MAKE A BACKUP before!)
If you don't know well how to do ALL this don't even try!
If you have the original european LTE ROM please share it!!!
Nicola

2) get a build.prop from the ROM you want to install
i can t found these file in the new full rom (in my case BTV-DL09C233B035 )

drlsd said:
2) get a build.prop from the ROM you want to install
i can t found these file in the new full rom (in my case BTV-DL09C233B035 )
Click to expand...
Click to collapse
I attached that I extracted from the same ROM.

nicolap8 said:
I attached that I extracted from the same ROM.
Click to expand...
Click to collapse
Please share your oeminfo if you can. Thank you.

thank u very muatch nicolap8 ,is it normal i have NRD90M test-keys like number of software in my medipad m3 european LTE ?

drlsd said:
thank u very muatch nicolap8 ,is it normal i have NRD90M test-keys like number of software in my medipad m3 european LTE ?
Click to expand...
Click to collapse
What are you saying about???
It depends from which ROM have you installed!
Often the truly incompetent Huawei developers uses the wrong keys...

nicolap8 said:
What are you saying about???
It depends from which ROM have you installed!
Often the truly incompetent Huawei developers uses the wrong keys...
Click to expand...
Click to collapse
from europien lte to BTV-DL09C233B336 and now my build verson is NDR90M test-key

nicolap8 said:
You need another ROM, FULL not OTA.
1) extract from the .APP the recovery (both) and boot images
https://forum.xda-developers.com/showthread.php?t=2433454
2) get a build.prop from the ROM you want to install
3) copy the build.prop in the /system folder, overwriting the original: now the old ROM will unlikely boot!
4) go in fastboot mode and flash recovery, recovery2 and boot images
5) copy the update.app in the dload folder
6) reboot and maintain pressed both volume keys to start recovery
7) if you are lucky the recovery will install the ROM.
Of course you will loose all your data (uhm, not even but... MAKE A BACKUP before!)
If you don't know well how to do ALL this don't even try!
If you have the original european LTE ROM please share it!!!
Nicola
Click to expand...
Click to collapse
rom-stock-btv-dl09c100b009-european
https://forum.xda-developers.com/mediapad-m3/how-to/rom-stock-btv-dl09c100b009-european-t3588477

nicolap8 said:
What are you saying about???
It depends from which ROM have you installed!
Often the truly incompetent Huawei developers uses the wrong keys...
Click to expand...
Click to collapse
Hi nicolap8 even I followed the same steps as you suggested with the file links you shared and I am also NRD90M test-keys on my Mediapad BTV-DL09
installing Magisk first time gave me a fail message but second time it works like a charm. thanks
could you help, thanks

Switched to eu rom, updated to nougat.. unlocked bootloader and rooted with magisk
But using magisk caused the fingerprint sensor not to work at all and there is no settings for the FP in the settings menu.
Uninstalled magisk and the fingerprint worked again but obviously I lost root.
Flashing SuperSU didn't work gives an error in twrp no matter what version I try.
Any idea on how to root without compromising the fingerprint sensor?? :/

Half Alive said:
Flashing SuperSU didn't work gives an error in twrp no matter what version I try.
Click to expand...
Click to collapse
Error? we do not see errors...
Post recovery.log

question
how to flash firmware for Huawei Mediapad M3 ? I know how to do it for galaxy with odin ?.
where I download firmware for Huawei Mediapad M3 ?

carlo67 said:
question
how to flash firmware for Huawei Mediapad M3 ? I know how to do it for galaxy with odin ?.
where I download firmware for Huawei Mediapad M3 ?
Click to expand...
Click to collapse
You have more than 600 posts and yet have not understod the rules here???
SEARCH and READ!

Fingerprint Button
Hello, velocity.
Worked for me, thx.
The fingerprint button doesn't work anymore.
Is there a way to activate it (without loosing root by uninstalling magisk)?
Kind regards

veloc1ty said:
Okay, managed to get Nougat and root for my BTV-DL09. Here is a fast forward tutorial how to do that.
I could only root it by using Magisk, Supersu (even the special emui5 ones) did not work for me.
Files:
ROM: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1224/g490/v78425/f1/full/update.zip (BTV-DL09C233B336)
Data: http://update.hicloud.com:8180/TDS/...full/dualcu/cn/update_data_full_dualcu_cn.zip
Click to expand...
Click to collapse
Those Links are dead. Anyone save a copy? Willing to share? Thanks.

bricked device with oreo, old unbrick doesnt work

hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...

after over 10 hours of fiddeling around a found a really easy solution:
most of you know HWOTA helps with this, but the "normal" version wont work after flashing oreo. but this version is flashed via twrp and is still working!
but you will need a oreo compatible twrp, which you can find here
i know the links are to mate 9 software, but since the p10 and mate 9 are nearly identical, it works on the p10 as well

can you post the step by step guide?
i am on oreo 8.0.0.046 and want to flash another version, or downgrade to nougat because few things don't work on this version

i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.

johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
failed install twrp- error find twrp 3.0.3, and i replaced to oero mate 9 recovery....
EDIT: success - problem was on the computer

johdost said:
i dont know if downgrading works, i just reflashed the latest oreo.
accordingly to the first link it should work, just flash the TWRP from the second link and then follow the instructions from the first link.
Click to expand...
Click to collapse
i did sucsses to install twrp but on the second step, when i press on install on twrp, the phone restart to erocovey and failed to find the files. what am i doing wrong?
i think that i am stuck with that version forever....

if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"

johdost said:
if you reboot to erecovery, you have not successfully installed twrp. you have to install it with "fastboot flash recovery_ramdisk <path to twrp>"
Click to expand...
Click to collapse
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks

t.h.i said:
you misunderstood me.
i do have twrp, i created HWOTA8 folder on sd card, copied hwota8 update zip, MHA_RECOVERY8 No check and the 3 files that i renamed as it said. after that, from twrp i clicked on hwota8 update zip and begin flash, the phone reboot to stock recovery and failed to install - "files don't found".
please help me fegure out what's the problem.
thanks
Click to expand...
Click to collapse
EDIT : the process is sucsses, but its the same version.... 8.0.0.046

Bricked, no TWRP access, any ideas?
Hi.
I know this about a P10, I have a P10 Plus (VKY-L29C605), but the process should be similar, I think.
I bricked my phone after succesfully upgrading from B174 to B321 using HWOTA. After which I decided, since I was at it, to flash the Hyperplus Kernel. This led to a bootloop. To fix it I decided to just go ahead and HWOTA B321 all over again and get over it, and would have probably gone just fine, except I decided to rebrand (C605 > C432) while I was doing that, silly (no, stupid) mistake. This led to the brick I am currently expriencing, I have no recovery access, erecovery or TWRP.
So now I am left trying to unbrick the phone. I extracted the UPDATE.APP for both update_all_hw.zip and update.zip using the Huawei Extractor Tool with no difficulty, except unbricking methods ask for boot.img, which I could not find, so I went along without it and flashed: cust.img, recovery_ramdisk.img (using fastboot recovery_ramdisk command for Oreo), and system.img. All of the commands completed succesfully, but no shebang, still bricked and no recovery access. I figure this has to do with the rebrand as the result after executing the command "fastboot getvar vendorcountry" shows the rebrand pulled through (hw/eu 432).
I am currently downloading HWOTA8.zip (3GB worth of download) to see if I can do something it. I am also downloading the L29C432B360 OTA-FULL, since I believe I am not getting any progress becuase I used the updates for L29C605B321.
The kind people at funkyhuawei told me they could fix it with their tool, but I don't have the money for that right now.
I will post updates, but any ideas would be greatly appreciated.

Many of us have posted over this in the last couple of days. Seems like Funky Huawei unbrick tool was the mehtod to get it work for me. You could try that!

or use dc-phoenix for me it worked (= in the moment i try to capture the usb ports kommunikation so i have the tool with the aktual firmware longer for 3 days :silly:
would first give dc a try 20 bucks for 3 days is ok i think (=

johdost said:
hi guys,
yesterday i installed the oreo beta on my VTR-L29 but then i brickedd it *cry*. unfortunateley the unbrick methods found here in the forum don't work because the oreo update made some changes in the system file structure...
has anyone an idea what to do?
maybe someone can provide me a recovery image for twrp? (one for oreo, otherwise it wont work) so i can give this a try...
Click to expand...
Click to collapse
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.

So I was able to get the C432B360 firmware and I flashed it, but no I can't enter recovery mode because the battery is low (red lightning bolt/red led flash). Anybody know how to charge or force recovery mode boot from fastboot?

If anyone needs, can use my DC-Phoenix account, I don`t need it anymore.
Your username is: cesedy
Your password is: dnL4eHEm

Greting
ure3808 said:
Must download some software for your phone, unzip update.zip, decompile UPDATE.APP to .iso files, (like recovery.iso, system, iso, vendor iso, boot iso) use fastboot and 10 minuts job, I brik my device over 10 thimes, and repair it.
Click to expand...
Click to collapse
Greeting,
Can you explain the procedure of how to do it?
Thank you

{SOLVED}PLEASE READ Bricked My phone. A help please **URGENT**

**URGENT** i have my p20 pro 6/128 with 9.0 last version ROOTED somehow i found a article.. the root was success. Tried to flash official twrp with twrp app and then everything was like HELL.
If i let my phone boot says error! func no: 10 boot image. error no :2 load failed. i faced something simillar when trying to get into recovery sometimes.
I can get into erecovery cant format or download official firmware. I can get into fastboot, download mode. I am gonna tell you everything . every program i tried AND FAILED!
TRIED: multi tool for huawei ( i download a version i think its 165 something when i press flash selected the program closed)
TRIED: to FLASH like 10 times ramdisks, recoverys, CANT FIND BOOT.IMG.
TRIED: Re-flash 9.0 says missing zip files THATS IMPOSIMPLE NOTHING IS MISSING I AM SURE
TRIED: a guide that said to download firmware and i would find a folder named DLOAD. i did everything. COULDNT FLASH SOMETHING ON DOWNLOAD SAYS ERROR
TRIED: ALMOST EVERYTHING
PLEASE HELP ME, HOW TO FIX IT? its very important for me and for everyone who is facing the same problem
Phone infos From Multi tool program http://prntscr.com/min398
and the firmwares i tried 1) http://prntscr.com/min3tn
2) http://prntscr.com/min40j
SEE SOME POSTS BELLOW TO SEE HOW I FIXED IT SUCCESS AFTER MANY ERRORS

1 found this post, and flashed all of them BUT there is not ramdisk on the files. i looked on two different firmwares which should i flash over ramdisk which doesnt exist?
first i run the command fastboot flash kernel kernel.img and i could boot into TWRP for first time. now i cant.
there are not errors for now. only if i boot my phone says phone keeping booting.
when i got to twrp and tried to reboot into system said there is no OS.
How and which os i should flash? since Multi tool program kicks me
HELP
https://forum.xda-developers.com/honor-9/help/help-softbricked-h9-oreo-t3750282

So you're typing a little erratic.
Can you get to eRecovery? This is your best option..
If not then you'll need to reflash all the parts of the OS back to the phone manually..
Beyond that you'll need a recovery method, not sure if it's a device of a program but it can usually help, depends on what is borked.

dladz said:
So you're typing a little erratic.
Can you get to eRecovery? This is your best option..
If not then you'll need to reflash all the parts of the OS back to the phone manually..
Beyond that you'll need a recovery method, not sure if it's a device of a program but it can usually help, depends on what is borked.
Click to expand...
Click to collapse
i can get into erecovery i cannot download the official and flash it throught there says error.. what else i can do
I cant understand what yyou saying here Beyond that you'll need a recovery method, not sure if it's a device of a program but it can usually help, depends on what is borked.
I get into Erecovery if i press download latest version and recovery after some times when i put the wifi pass says error. Error i got also on HIsUite when i tried to format from there and download the latest versio. So we go manually but HOW? i tried almost everything

i tried this https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
success all command went trhough the phone
the problem is i cannot flash twrp
my phone has unlocked bl

well i did a lot of search if you ask me i download 5-7 different programs that can flash stock firmware. ONE seems to be legit for 9.0 RE-flash 9.0 which has commands on its script like this guy says and he helped me too
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
also if someone cant boot into twrp after the frist steps and see the erecovery just format everything from erecovery and then it will boot to twrp.
also now says installing update.
i hope imeis serial numbers etc wont lost..
Thats the script i found i dont remeber where
http://prntscr.com/mitvum
but i can upload somewhere the files
if you run FLASH.bat and says MISSING ZIPS then remove the update."zip" {ZIP PREFIX FROM THE NAME OF THE FILES ONLY} and run again the bat
the procedure may take 10-30 mins

What about the otg method?
Also I would never use a tool like this.

StonebridgeGr said:
**URGENT** i have my p20 pro 6/128 with 9.0 last version ROOTED somehow i found a article.. the root was success. Tried to flash official twrp with twrp app and then everything was like HELL.
If i let my phone boot says error! func no: 10 boot image. error no :2 load failed. i faced something simillar when trying to get into recovery sometimes.
I can get into erecovery cant format or download official firmware. I can get into fastboot, download mode. I am gonna tell you everything . every program i tried AND FAILED!
TRIED: multi tool for huawei ( i download a version i think its 165 something when i press flash selected the program closed)
TRIED: to FLASH like 10 times ramdisks, recoverys, CANT FIND BOOT.IMG.
TRIED: Re-flash 9.0 says missing zip files THATS IMPOSIMPLE NOTHING IS MISSING I AM SURE
TRIED: a guide that said to download firmware and i would find a folder named DLOAD. i did everything. COULDNT FLASH SOMETHING ON DOWNLOAD SAYS ERROR
TRIED: ALMOST EVERYTHING
PLEASE HELP ME, HOW TO FIX IT? its very important for me and for everyone who is facing the same problem
Phone infos From Multi tool program http://prntscr.com/min398
and the firmwares i tried 1) http://prntscr.com/min3tn
2) http://prntscr.com/min40j
SEE SOME POSTS BELLOW TO SEE HOW I FIXED IT SUCCESS AFTER MANY ERRORS
Click to expand...
Click to collapse
dladz said:
What about the otg method?
Also I would never use a tool like this.
Click to expand...
Click to collapse
like i said in the first post the otg method with the dload folder failed.
Why you wouldnt try it?

StonebridgeGr said:
like i said in the first post the otg method with the dload folder failed.
Why you wouldnt try it?
Click to expand...
Click to collapse
Because I've got no need to mate, manual is always safer.
Have you asked in the thread where you got the tool?
I'm not sure what else to suggest pal

dladz said:
Because I've got no need to mate, manual is always safer.
Have you asked in the thread where you got the tool?
I'm not sure what else to suggest pal
Click to expand...
Click to collapse
now everything is fine but i cant root..

StonebridgeGr said:
now everything is fine but i cant root..
Click to expand...
Click to collapse
Everything is fine? What did you do?
With root Judy follow the instructions that have worked for other people. Don't rush things.

dladz said:
Everything is fine? What did you do?
With root Judy follow the instructions that have worked for other people. Don't rush things.
Click to expand...
Click to collapse
i post i early post a link that helped me a little bit i think i edited the .bat script
also i made a video and post about rooting and everything is fine.
the problem is you can have twrp and magisk root both:/
either you have root and not twrp or either you have twrp and not root

[recovery] twrp 3.2.1-0

TWRP for EMUI 9.1​
THIS TWRP IS FOR DEVICES WITH KIRIN 65x SOC (HI6250) RUNNING EMUI 9.1 AND NOT EMUI 8
What's different from TWRP for Android 8?
erecovery_ramdisk option to flash .img
system_root partition for 9.1
What works now?
You can now flash .zip like Gapps and they'll work (before it gave error 64)
What doesn't work?
At the moment, I don't know if ADB sideload works.
Otherwise, everything seems to be working.
How to flash this TWRP
To recovery_ramdisk
Code:
fastboot flash recovery_ramdisk [TWRP].img
I DIDN'T BUILD ANY OF THIS
I only modified a TWRP (which I don't know the author, sorry) to make it work good on hi6250 EMUI 9.1 devices.
I would like to have the hardware and knowledge to build and develop new stuff but at the moment I can't.
Download - https://drive.google.com/open?id=10VONtu_Bf6grW60N7K8gMrzQSG-rswni
Feel free to contact me on Telegram
https://t.me/GelberVogel (PM) - temporary

screenshots

This guy's doing gods work, saved me from throwing a perfectly good device into the trash. Working perfectly, tested on an ANE-LX1!

Anyone know ROMs that will work with emui 9?
I Know openkirin a long time but the Bluetooth is restarting in the emui 9 based builds.

with this recovery boot the gsi roms? currently only the openkirin gsi boot, but using adb... All the gsi I've flashed by adb or the previous recovery give bootlop

joaomoreira1001 said:
Anyone know ROMs that will work with emui 9?
I Know openkirin a long time but the Bluetooth is restarting in the emui 9 based builds.
Click to expand...
Click to collapse
Probably phh treble

Linux Lounge said:
Probably phh treble
Click to expand...
Click to collapse
i will try it thanks
---------- Post added at 09:09 PM ---------- Previous post was at 08:48 PM ----------
Linux Lounge said:
Probably phh treble
Click to expand...
Click to collapse
nope that does not boot

Yellow_B_ird said:
TWRP for EMUI 9.1​
What's different from TWRP for Android 8?
erecovery_ramdisk option to flash .img
system_root partition for 9.1
Click to expand...
Click to collapse
Hello, please can someone tell me how to flash it in erecovery_ramdisk partition?
I have recovery brick and i can't flash it in recovery_ramdisk...
This is my last hope!

Mustaine635 said:
Hello, please can someone tell me how to flash it in erecovery_ramdisk partition?
I have recovery brick and i can't flash it in recovery_ramdisk...
This is my last hope!
Click to expand...
Click to collapse
Tell me what device do you have (luckily I came back to XDA early enough, I hope)
Also, try flashing stock kernel (I can send mine for HUAWEI P Smart 2018 FIG-LX1C432 EMUI 9.1 B120)

Yellow_B_ird said:
Tell me what device do you have (luckily I came back to XDA early enough, I hope)
Also, try flashing stock kernel (I can send mine for HUAWEI P Smart 2018 FIG-LX1C432 EMUI 9.1 B120)
Click to expand...
Click to collapse
I have p smart fig-lx1.
I tried to flash it using fastboot flash erecevery_ramdisk [file].img but it says failed...
The standard recovery was bricked because i used hurupdater to update to emui 9.1... The phone works but i have no recovery so i can't do anything...

Yellow_B_ird said:
Tell me what device do you have (luckily I came back to XDA early enough, I hope)
Also, try flashing stock kernel (I can send mine for HUAWEI P Smart 2018 FIG-LX1C432 EMUI 9.1 B120)
Click to expand...
Click to collapse
It works! I had to flash 3 files for the stock recovery (recovery_ramdisk, _vbmeta and _vendor). Then i flash the twrp recovery and it works. The only problem is that when i browse internal storage, the folders name are all random characters... Why that?
Another question is, how can i root my device now?

Mustaine635 said:
It works! I had to flash 3 files for the stock recovery (recovery_ramdisk, _vbmeta and _vendor). Then i flash the twrp recovery and it works. The only problem is that when i browse internal storage, the folders name are all random characters... Why that?
Another question is, how can i root my device now?
Click to expand...
Click to collapse
Glad it worked!
Just flash Magisk like you would with any TWRP assuming it works. If you want recovery and root in a stupid way.. just flash my TWRP to recovery and in recovery, flash my or any other TWRP/recovery to e-recovery and after that, flash Magisk like usual.

Thank you for the build. Any chance of flashing this on a device with locked bootloader, like using an official flash tool to flash a signed recovery or using e-recovery (I have experience with bootloader and flashing but not with Huawei/Kyrin)?

I keep getting a (remote: partition length get error) error ... Any help ?

Thanks a lot!! :good:

The Google Drive Link doesn't work!
I am trying to root my Huawei P Smart but the Google Drive Link for TWRP doesn't work https://forum.xda-developers.com/huawei-p-smart/development/recovery-twrp-3-2-1-0-t3953343
Was your Google account terminated. If you are able to can you send me the TWRP Image or if your Google account works can you upload the TWRP image to Google Drive?
Love from Greece![/QUOTE]

Hi, gelber here.
I'm sorry for the confusion, but I really barely touch XDA and as I deleted my old Google account, I lost access to this XDA account (I_am_gelber) and to that gdrive link. However, I can defo give the file back in a bit but I'm surely gonna forget. If you really want the file, please pm me at t.me/ActuallyNotGelb since I still need to give it a quick find.
Thanks!

ActuallyNotGelb said:
Hi, gelber here.
I'm sorry for the confusion, but I really barely touch XDA and as I deleted my old Google account, I lost access to this XDA account (I_am_gelber) and to that gdrive link. However, I can defo give the file back in a bit but I'm surely gonna forget. If you really want the file, please pm me at t.me/ActuallyNotGelb since I still need to give it a quick find.
Thanks!
Click to expand...
Click to collapse
Can you please upload the file to some website. I'm unable to create a Telegram account right now so can you please upload the image to any website? It would mean a lot for me for you to do that!

GreekProgrammer said:
Can you please upload the file to some website. I'm unable to create a Telegram account right now so can you please upload the image to any website? It would mean a lot for me for you to do that!
Click to expand...
Click to collapse
Any luck?