Database Develop

[Q] Sprint P100 can not wipe

Hi All:
My Sprint Tab P100 got some strange problems.
It's a second hand P100, Once i turn on the tab, it will warning with 3 Beebee, and nook & Amaza Mp3 & Market will report error.
Below warning will show up:
Amazon MP3_nook
“The application XXX has stopped unexpectedly, pls try again”
Market
"Attention:
An Error has occured, Please try again later."
After check, i found the original usr information still there.
(Gmail/Facebook account will try to sync with previous owner's ID. and i can not remove the account.)
What i have tried:
1) I have tried to WIPE using system recovery, after WIPE both data & Cache partition, issue still exist.
2) Perform the Samsung factory reset by enter *2767*3855# in the Memo, problem still there.
3)Format the SD card with Phone & Windows, still got problem
4) Flashed with the stock EA24 Rom from XDA(with Modem,using Odin), the problem still remain the same.
5)Flashed with DJ30, the problem still exist(Base/Fireware EA24).
6)Tried to install CWM, failed to boot up(Rooted before install CWM, after flash the Zimage to Kernal or recovery, some strings flush in the screen, then the tab hung at Samsung logo and reboot.)
I guess those problem was caused by some program information still remain in the internal storage, even after factory reset or flash with other ROM.
Can somebody help on this? Also prefer someone can help on how to install CWM
I am interesting that the OVERcome 2.01 Rom got a version to WIPE the internal storage, but the OVERcome rom are designed for GSMer. Can i tried to use it to clear my internal storage?

just installed Astro, the program will crashed when launch it

Can some one help on this topic?
I am suspecting my internal storage was locked to Non-Writable.
This might result CWM can not access the internal memory caused the failure of the installation.
Is it related to the Flash lock option in the Odin?

Check this thread..
http://forum.xda-developers.com/showthread.php?t=1133053
That has the stock files, and instructions to get root and CWM installed with the stock software. Using Odin to put the stock firmware (EA24) should wipe anything and everything off the tab and restore it to as if it were new out of the box. You also might want to wipe your sd card as it can cause issues with the CWM ext4 conversion.

Hi pvtjoker42 & All:
During the process of Kernel with CWM Recovery, i has been stopped @ step7
1) Download the zip file here
2) Unzip the file. You will need the file named zimage only.
3) Open Heimdall Frontend
4) Select Browse under Kernel and navigate to the file you downloaded in step 1 and select it
5) Press Start
6) The Tab will reboot, but will freeze on the Samsung logo. Turn it off and boot into recovery (Vol Up + Power)
~~~~~~~~~~~~~~~~~~~~
my tab failed here, no matter what you pressed, it doesn't go to CWM. Do u have any idea?
~~~~~~~~~~~~~~~~~~~~
7) CWM Recovery will attempt to back your tab up, but will fail. Don't fret.
8) Do a factory reset in CWM Recovery and reboot
9) You'll freeze on the Samsung logo again Turn it off and boot into recovery.
10) CWM Recovery will back your Tab up successfully.
11) You now have a CWM backup. Reboot.
12) Your auto rotate is broken.
13) Download the rotation file
14) Put it in /system/lib/hw and change the permissions to match the other items.

Can someone helps?
Today i tried 1 more things, Use a update.zip to update the tab from EA24 to EB28,before try this, i have tried OTA to EB28, it never success.
i download the update.zip from <forum.sdx-developers.com/index.php?PHPSESSID=99sdnmh5pm4rtuv39hk80f7du6&topic=13104.0;nowap> it seems to be official one, and the recovery is the stock version, but it failed again.
I start to believe that my internal storage has been locked, and data can not write in.
Is it possible to due to Fstab issue?
Pls helps to save my tab....

There is only one thing to do : return to stock. Carefully follow the guide. Don't do anything else to your tab, until you go through the restock steps :
http://forum.xda-developers.com/showthread.php?t=1133053
[SPRINT] Sprint Tablet Owners Thread (Root, ROM, Flash to stock, CWM Recovery)
The process reformats/repartitions your internal sd card, and sets the correct permissions. If this process fails, there is probably something wrong with the tab.

you might also try to select the option to repartition in Odin when going back to EA24. Then try the steps to get EB28 OTA update, and once you've got that up and running, you can try the update.zip to get to EF17 (gingerbread, as long as you don't need root)

I wouldn't. Try a different sd card
Sent from my Nexus S 4G using Tapatalk

Hi All:
Thanks for the advice.
I have tried to back to stock EA24 using odin, but the situation still ramain the same.
And it fail to OTA to EB28, the EB28 upgrade program will reboot the machine, and enter recovery model. but it will complete the program. also i have tried to put EB28 update.zip in the SD card, but also fail to upgrade to EB28.
I have repartition the phone by P100 serveral time using odin, also tried update Pit file. All failed.
I have format the SD card in Windows & then in Android, useless.
Now i have some clues:
In P1000 rom Roto-JME, there is Movinand.bin, this one got same name as the internal storage IC from samsung. i am thinking that file could be a file similar to partition table.
Can someone help to dump a "movinand.bin" for me from P100?
steps:
1)Get back to stock EA 24
2)Wipe Cache & factory data
3) Root it (Using superone click , you can find it here http://forum.xda-developers.com/showthread.php?t=803682)
4)Install terminal (i use better terminal) or using a ADB to connect to shell.
5)Type "su", check whether "$" change to "#" in the shell
6) Type “dd if=/dev/block/mmcblk0p2 of=/sdcard/movinand.bin bs=4096”
7) Find the Movinand.bin in the SD card
You can sent it to me by drop a email to [email protected]
If there is anything wrong, pls help to correct me
Thanks in advance

as some people is asking how did i fix the issue, just publish the information here.
I fixed the issue by replaced the internal storage (the chip), cost about US$ 30(RMB 200)
If anyone have better solution, just post here to share

Problem with original SD card.

My original Asus SD card is not recogniezd by my laptop whereas a micro SD card on an adapter is recognized. I think I need to use the original one to flash the tablet. Any idea?
Thank you

Icarus701 said:
My original Asus SD card is not recogniezd by my laptop whereas a micro SD card on an adapter is recognized. I think I need to use the original one to flash the tablet. Any idea?
Thank you
Click to expand...
Click to collapse
Need more info. Format type of internal SD? Drivers? OS? Etc...

Thank you for your reply. Are the above links given to give me a hand (stupid question certainly)?
Well, I am going to try to repair my tablet with a new SD card. But I need help right from the start.
Living in France, I suppose the right firmware must start with WW. I have downloaded all these firwares from Asus:
UL-K00C-WW-11.4.1.27-user.zip, UL-K00C-WW-11.4.1.29-user.zip, UL-K00C-WW-11.4.1.30-user.zip, WW_10_26_1_18_SDupdate.zip, WW_epaduser_10_14_1_47_UpdateLauncher.zip, WW_epaduser_V11_4_1_17_updatelauncher.zip.
Which one should I use? What am I going to do next?
When I start it in flashboot mode, I get the message "Android Macallan-user BL released by "WW_epad_11.4.1.30-20150121"
Press ...
Starting fastboot USB download protocol"

Icarus701 said:
Thank you for your reply. Are the above links given to give me a hand (stupid question certainly)?
Well, I am going to try to repair my tablet with a new SD card. But I need help right from the start.
Living in France, I suppose the right firmware must start with WW. I have downloaded all these firwares from Asus:
UL-K00C-WW-11.4.1.27-user.zip, UL-K00C-WW-11.4.1.29-user.zip, UL-K00C-WW-11.4.1.30-user.zip, WW_10_26_1_18_SDupdate.zip, WW_epaduser_10_14_1_47_UpdateLauncher.zip, WW_epaduser_V11_4_1_17_updatelauncher.zip.
Which one should I use? What am I going to do next?
When I start it in flashboot mode, I get the message "Android Macallan-user BL released by "WW_epad_11.4.1.30-20150121"
Press ...
Starting fastboot USB download protocol"
Click to expand...
Click to collapse
Well you should use the latest one which is UL-K00C-WW-11.4.1.30-user.zip
I'm not sure what you are attempting to do? Are you saying that your internal data is not working or just not recognised by windows. If the later you probably just need to update your drivers on windows.
Have a search for the latest compatible windows ones for Asus.

my tablet is stuck in boot process. I did something wrong when deleting built-in apps, so I have to make a recovery.
I made some progress in the meantime. Connected the tablet to the PC, put the CWM boot.img in the fastboot folder, put Asus UL-K00C-WW-11.1.4.30 firmware on the SD card, started fatboot.exe and got the menu on the tablet (reboot system now - install zip - wipe data partition - ...), started install.zip.
Now I get the message "This package is for KOOC; this is a tf701t. Error in storage/USBdisk1h/ul-KOOC-11.4.1.30-user.zip.Installation aborted

external SD card recovery to stock
Icarus701 said:
my tablet is stuck in boot process. I did something wrong when deleting built-in apps, so I have to make a recovery.
I made some progress in the meantime. Connected the tablet to the PC, put the CWM boot.img in the fastboot folder, put Asus UL-K00C-WW-11.1.4.30 firmware on the SD card, started fatboot.exe and got the menu on the tablet (reboot system now - install zip - wipe data partition - ...), started install.zip.
Now I get the message "This package is for KOOC; this is a tf701t. Error in storage/USBdisk1h/ul-KOOC-11.4.1.30-user.zip.Installation aborted
Click to expand...
Click to collapse
Try This:
http://forum.xda-developers.com/showpost.php?p=59463747&postcount=4
:laugh:

K94U said:
Try This:
http://forum.xda-developers.com/showpost.php?p=59463747&postcount=4
:laugh:
Click to expand...
Click to collapse
This procedure did not work. However I have installed CyanogenMod with the Cyanogen recovery on the tablet and finally coud boot. Now I would like to go back to the Asus settings. How can I do this? The Asus UL-K00C-WW-11.1.4.30 firmware, as I said before, is followed by the message "This package is for K00C; this is a tf701t.", but the tablet appears as K00c in My Computer. Different names, same device!

Icarus701 said:
This procedure did not work. However I have installed CyanogenMod with the Cyanogen recovery on the tablet and finally coud boot. Now I would like to go back to the Asus settings. How can I do this? The Asus UL-K00C-WW-11.1.4.30 firmware, as I said before, is followed by the message "This package is for K00C; this is a tf701t.", but the tablet appears as K00c in My Computer. Different names, same device!
Click to expand...
Click to collapse
Did you rename the stock firmware zip file to T4_SDUPDATE.zip and put the zip firmware file on the root of the EXTERNAL SD card and power on or restart your device. it should detect a firmware update. if it does not detect any firmware update after about 1 or 2 minutes or it boots normally, go into bootloader and select RCK from the menu with zip file on the external sd card.
it sounds like you were trying to install the stock firmware zip file through the custom recovery install zip option which will not work. TF701T is KOOC... also, make sure 100% that your Tablet is the WW version and not the TW or US version!

K94U said:
Did you rename the stock firmware zip file to T4_SDUPDATE.zip and put the zip firmware file on the root of the EXTERNAL SD card and power on or restart your device. it should detect a firmware update. if it does not detect any firmware update after about 1 or 2 minutes or it boots normally, go into bootloader and select RCK from the menu with zip file on the external sd card.
it sounds like you were trying to install the stock firmware zip file through the custom recovery install zip option which will not work. TF701T is KOOC... also, make sure 100% that your Tablet is the WW version and not the TW or US version!
Click to expand...
Click to collapse
The zip firmware file was on the root of the EXTERNAL SD card. I did go into bootloader and select RCK from the menu, then install zip file --choose zip from /storage /USB disk1h -- T4_SDUPDATE.zip.
I am going to try the other versions of the firmware.

Icarus701 said:
The zip firmware file was on the root of the EXTERNAL SD card. I did go into bootloader and select RCK from the menu, then install zip file --choose zip from /storage /USB disk1h -- T4_SDUPDATE.zip.
I am going to try the other versions of the firmware.
Click to expand...
Click to collapse
okay, since you have a custom recovery the zip file is not detected. CM and CWM recovery are not the same. you should be able to find an installable stock file somewhere or try another rom. As long as you have a working recovery installed then you should be good to go for any updates.
This is your best bet for near stock: http://forum.xda-developers.com/transformer-tf701/development/rom-t2999102

K94U said:
okay, since you have a custom recovery the zip file is not detected. CM and CWM recovery are not the same. you should be able to find an installable stock file somewhere or try another rom. As long as you have a working recovery installed then you should be good to go for any updates.
This is your best bet for near stock: http://forum.xda-developers.com/transformer-tf701/development/rom-t2999102
Click to expand...
Click to collapse
Since I can use the tablet with CyanogenMod now, I am satisfied. The links you gave me above helped me a lot.
Thank you. I could not have made it without your help. Warm handshake.

Desire 500 Showing "Not Rooted" After Flashing ZIP From SD Card

Did everything, last install from zip, yet not rooted
I did everything, boot-loader unlock, adb download install in pc, install custom rom CWM/TWRP using pc's cmd. Than install ZIP from SD card. It shows me SUCCESS. But when I power on my device It looks like before, no change done. I checked if rooted or not, it shows NOT ROOTED. Why I am failing. I did the process according to the " http://forum.xda-developers.com/showpost.php?p=46430699 " . Please someone help. :crying::crying::crying::crying:

Did I brick my phone?

Background: I have the XT1064 (unlocked, single sim), and I actually just bought this phone. I ordered it because I have a droid Turbo that I don't want to risk custom ROMs on, so I figured this $100 device would be good to play with. I first unlocked the bootloader, courtesy of motorola, and then I flashed custom recovery (TWRP). A bit of tinkering later and I discover I can't get the recovery to stick. "oh well, I can plug in my phone and type a command on boot no problem." Next, I tried flashing the latest release of CM12.1 for my phone (titan) and I get an error. I search around trying to fix the error, and everyone says "use the latest nightly (CM13)" and "factory reset your phone via twrp" so that's what I do. Next, after waiting for my phone to start up, I get everything rolling so I can copy my new image over.
Problem: I find that access is denied to "sdcard/download" so I try other folders in sdcard. None are allowed for adb.
Attempted solutions: On my phone, I install ES file explorer, which reveals that everything in sdcard/ is gone except the Android folder, and an extensionless file called TWRP. Still not suspecting anything, I attempt to create a "download" folder. No luck, access still restricted. I tried downloading a file via the internet browser, "failed to find downloads directory". Everything in sdcard is barred from me. Besides the SuperSU that's half-installed (part of twrp apparently) this is a factory new device, I purchased it from best buy via ebay. Is my phone toast already? Or is there something I can do?

MCFX2 said:
Background: I have the XT1064 (unlocked, single sim), and I actually just bought this phone. I ordered it because I have a droid Turbo that I don't want to risk custom ROMs on, so I figured this $100 device would be good to play with. I first unlocked the bootloader, courtesy of motorola, and then I flashed custom recovery (TWRP). A bit of tinkering later and I discover I can't get the recovery to stick. "oh well, I can plug in my phone and type a command on boot no problem." Next, I tried flashing the latest release of CM12.1 for my phone (titan) and I get an error. I search around trying to fix the error, and everyone says "use the latest nightly (CM13)" and "factory reset your phone via twrp" so that's what I do. Next, after waiting for my phone to start up, I get everything rolling so I can copy my new image over.
Problem: I find that access is denied to "sdcard/download" so I try other folders in sdcard. None are allowed for adb.
Attempted solutions: On my phone, I install ES file explorer, which reveals that everything in sdcard/ is gone except the Android folder, and an extensionless file called TWRP. Still not suspecting anything, I attempt to create a "download" folder. No luck, access still restricted. I tried downloading a file via the internet browser, "failed to find downloads directory". Everything in sdcard is barred from me. Besides the SuperSU that's half-installed (part of twrp apparently) this is a factory new device, I purchased it from best buy via ebay. Is my phone toast already? Or is there something I can do?
Click to expand...
Click to collapse
Since you can boot it, it's not bricked, if ur on cm 13 , ur external memory card is formatted as internal storage (the reason why you cant access it via twrp) , go to settings >storage and USB > select ur memory card >click on options (top right corner) >format as portable storage. Now you can access ur sd card via twrp. And check ur twrp version, 8.6.0 , and command Used to flash it via Pc "fastboot flash recovery filename.img (remove img from original file) . Hope this helps, and about Cm12, what was the error you were getting?

Motorola XT1068 + TWRP 3.0.2.0 - Warning "No OS Installed" + could be found from adb

Motorola XT1068 + TWRP 3.0.2.0 - Warning "No OS Installed" + could be found from adb
Hi,
I want to sell my rooted motorola moto g2 XT1068. I tried delete it and do a factory reset so clicked at twrp to "Wide > Advanced Wipe" and choose all partitions (I think this was a failure) and after that on "Swipe to Factory Reset".
But when I reboot I get the message "No OS Installed!"
I tried to install adb. But it doesn't find any device on my pc. I also installed the motorola driver, but windows can't the my mobile.
What can I do now? I have downloaded the firmware from firmware.center, but how can I install it?
I would be really grateful for your help!

Imagine you restarted your PC to old DOS, formatted it and then tried to start Windows normally - how could you, since you erased everything?
On computers, you would need a CD with the system installing package.
For mobile phones, you need to copy the stock ROM or other custom ROMs for Titan AND proper Gapps on a SD card, insert it in your Moto, enter TWRP recovery and install the two zip files from the external storage card.
If your first run is successful, do not enter your data when asked by the Google wizard and never erase your phone again if you don't have a replacement system prepared.

I loaded the following-Zip Files on my MicroSD Card:
-open_gapps-arm-6.0-stock-20170825.zip
-crDroidAndroid-7.1.2-20170814-titan-v3.7.zip
But when I put the SD-Card into my motorla and go to recovery ond open the sd-card it shows me and empty MicroSD Card (30420MB) but the MicroSD-Card has a size of 28.7GB (free) and 0.98GB (full).
So what can I do now?
Is this the correct custom file?
How could I install it now?
Should I mound the MicroSD-Card?

The open_gapps are wrong. On their page, check the Android 7.1 box, then MINI and THEN hit the red download button. Move the card into a working phone (or computer), delete the gapps for Android 6, add the new ones, for 7.1 Nougat, then place the micro card back into the target phone.
In TWRP, go to Install -» Select Storage [or browse "Up A Level" to] sdcard1 -» [the folder where you placed the zips or] select crDroid...zip FIRST -» Flash it, then repeat to flash the open_gapps...zip, then REBOOT.
It'll take a few minutes - from 5 to 10 or even more, so have patience.

Thank you for your answer!
I have downloaded the new open_gapps zip file as you said. And replaced the old version on my sd card. Then I put the micro sd card in my motorola as you said. But I couldn't find it over TWRP. I also tried to mounted the micro sd card, but it doesn't help.
Then I tried to restart with the MicroSD-Card, but now I can't reach the TWRP again
Here is the screenshot https://ibb.co/ekCGBk and I tried the different items, but everytime I see the page "warning bootloader unlocked"

Yes, this is how it should look.
Press Volume Key DOWN, you'll reach RECOVERY, then press Volume Key UP to select Recovery.
Recovery = TWRP.
Once in TWRP, hit Install and browse for your zip files to install them.

Also when I go to "Recovery" only the white
"Warning Bootloader Unlocked"-Page is opening

Well, that's not good. Probably all that unnecessary mounting screwed up things.
Take a look at this video.
Then download latest Moto USB drivers.
Then learn about the ADB and Fastboot tool.
Then maybe try to flash the latest TWRP for Titan and restore everything already to how it should be.

I can't reach the phone with fastboot and I can't delete the bootloader warning. But suddenly I could installed the two image filles! Now the new firmware is working.
Is there a possibility to get the original one from motorola?
I also tried to put the "FixBootloaderWarning-Moto-G-2014.zip" on my sd-card to install it over TWRP, but I can't open it (I can only get a black screen when I choose "Recovery")-