Database Develop

[GET]LG Revolution VS910 Original Firmware

VS910ZV9_05.S9_05.P58014.R5.tot​

how use this frimware been waiting too root it u never know jcase

Holy crap... where did you get this?

This can't be real...

I'm confused what exactly is this?

nasirahmed said:
VS910ZV4_04.S4_04.P58008.R5.user.tot​
Click to expand...
Click to collapse
One million internets to you, sir(or madam)...
Sent from my VS910 4G using Tapatalk

is this so we can get developers to make a custom recovery??????????

it is supposed to be the stock firmware for the revolution which would allow you to flash your system back to stock.
I have scanned the file and there are 3 files contained inside. I have not been able to extract them however. There are 3 img files inside which tally some 700+ meg.

Haxcid said:
it is supposed to be the stock firmware for the revolution which would allow you to flash your system back to stock.
I have scanned the file and there are 3 files contained inside. I have not been able to extract them however. There are 3 img files inside which tally some 700+ meg.
Click to expand...
Click to collapse
I have not found a way to extract the embedded files either. This is used with a Verizon only tool that is readily available. I wouldn't recommend flashing this unless you brick or destroy your phone (as a last result).

how u flash this

blkhwk5177 said:
how u flash this
Click to expand...
Click to collapse
It's a program called: LGNPST. You can Google it and you will find a few download locations.

I looked everywhere to find out how to load this, can somebody with lg experience point me in the right direction. im coming from a droid x, i would just sbf to restore a phone; that was easy

LGPNST does not support this device yet that I know of.
Verizon has a tool as well but I don't think it works with TOT files.

Haxcid said:
LGPNST does not support this device yet that I know of.
Verizon has a tool as well but I don't think it works with TOT files.
Click to expand...
Click to collapse
Yeah, you have to have the proper DLL, and we haven't found it yet. Cubed said he'd have a stock ROM out here shortly.
After that, he plans to deodex and release a cleaned version of stock (debinged)

majorpay said:
Yeah, you have to have the proper DLL, and we haven't found it yet. Cubed said he'd have a stock ROM out here shortly.
After that, he plans to deodex and release a cleaned version of stock (debinged)
Click to expand...
Click to collapse
I'm really looking forward to de-binged, de-odexd etc. Rom!!!

Hi,
this is the factory soft provided by LG to update VS910.
[LGDP2V42]only_VS910_20110430_download
but this soft need a protection dongle (need to be attached to PC) to run. LG Service Centers have this. It will be intersting if someone can find something useful from it.

I don't know if it works or not but...
http://www.mobile-files.com/forum/showthread.php/1384-How-load-TOT-file-with-LGNPST-LAB.1.2
So i guess in LGNPST, you just click browse, then put *.* in file name, hit enter, then select your .tot.

The problem isnt getting the software its the fact that unlike motorola the lg program requires a device specific .dll file so without that file the flash software and firmware are really of no use
Sent from my rooted and de-Bing-ed LG Revolution

vs910 dll for npst
here is the dll u need to flash this firmware... as far as firmware u should be able to flash with npst lab version. u need to register dll first

lazarus2297 said:
The problem isnt getting the software its the fact that unlike motorola the lg program requires a device specific .dll file so without that file the flash software and firmware are really of no use
Sent from my rooted and de-Bing-ed LG Revolution
Click to expand...
Click to collapse
give me the link for the lab installer and the rest of the steps

Sprint LS995 .tot and .dll file for sprint users who have bricked their phones

Here is the Sprint .tot and .dll file to use in the LG flash tool to go back to stock. I am not responsible for anything you guys do with these two files. I am Just providing them for individuals who might need them. Also hopefully it will help us get a recovery on this device. Keep in mind that I bought these files for all of us to have.
https://drive.google.com/file/d/0B6HYWZRx8JLsSHA0MlIySlpWVnM/edit?usp=sharing
This is a zip package. So in order to use them please unzip the package first.
Thank you to wolfgart for the files.

hola
can you please link me to the LG flash tool to go back to stock. im trying to get the tool along with the step by step process. thank you

Wrong dll. f340 DLL or something like that
Sent from my LG-LS995 using Tapatalk

LG Flash Tool 1.8 and detailed Flash Guide
christiam.coronado said:
can you please link me to the LG flash tool to go back to stock. im trying to get the tool along with the step by step process. thank you
Click to expand...
Click to collapse
Hi there, !
Here is an additional link to the hyelton's thread on xda-devs twice: http://forum.xda-developers.com/showthread.php?t=2644083
Good Luck and please, hit the thanks button !

when i try to flash this it gives me "device model is different". i have a sprint flex.

ls995 showing ls990 .. not flashing .....

[TOOL] Preparing for KitKat: Return to OTA Path from any ROM

This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!

The emergency utility was able to get me out of my soft brick. Thank you sir!

xt925
Does it works on xt925 ?
Thanks.

morcego.surf said:
Does it works on xt925 ?
Thanks.
Click to expand...
Click to collapse
It does, the emergency will flash an XT926 firmware, might have to change internal files I guess. It did got me out of a flash failure then could get back into fastboot and then flash my Telcel firmware for my XT925.

Is this for XT925?! Is this the first thing i have to do to get Kit Kat official leaked last week?

andreluigo said:
Is this for XT925?! Is this the first thing i have to do to get Kit Kat official leaked last week?
Click to expand...
Click to collapse
i have seen some lazy people, but i must say you take the cake.
this thread was 4 hole post long before you posted. 2 of which, asked and answered your exact first question.
no self respecting person is going to help you, when you cant even read a 4 post long thread before asking a question in it.

open1your1eyes0 said:
This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!
Click to expand...
Click to collapse
Just wanted to thank you for creating this tool, man. The Emergency Fix really saved my skin from a soft brick.

Pretty sure this utility has bricked my phone. I was on 4.1.2 and was rooted and tried using the utility to return to stock. After the utility completed it gets stuck on the AP fastboot menu and it says Boot Failure. Any ideas to fix it?

Nice to know it.

open1your1eyes0 said:
This scripted tool (Windows Only!) I have written and packaged will allow you to return back to the stock OTA path from ANY single ROM (stock or custom) you might be running or even if your device is soft bricked at the moment (without even requiring RSD Lite).
Download the zip file: http://www.androidfilehost.com/?fid=23487008491965516
Unpack the zip file to your PC
Install Motorola Drivers First!
Then run the TOOL file and follow the instructions to guide you
I have also included some screenshots and an Emergency Fix in case you are stuck in Fastboot for whatever reason and need to restore back to stock and then continue the tool (automatically continues from the fix).
WARNING THIS WILL COMPLETELY WIPE ALL DATA INCLUDING YOUR INTERNAL STORAGE!
MAKE SURE TO BACKUP EVERYTHING YOU NEED BEFORE USING THE TOOL OR THE EMERGENCY FIX!
Click to expand...
Click to collapse
Hello,
Could you please write in big red letters in the beginning of your post : "ONLY FOR XT926, Do not use it for XT925" ?
Thank you

yoderz said:
Pretty sure this utility has bricked my phone. I was on 4.1.2 and was rooted and tried using the utility to return to stock. After the utility completed it gets stuck on the AP fastboot menu and it says Boot Failure. Any ideas to fix it?
Click to expand...
Click to collapse
Were you able to fix?
for OP, I have similar situation as yoderz on verizon, I get "Software Update Failed" and no OTA. Stuck on 9.18.XT926.Verizon.en.US

150kwh said:
Were you able to fix?
for OP, I have similar situation as yoderz on verizon, I get "Software Update Failed" and no OTA. Stuck on 9.18.XT926.Verizon.en.US
Click to expand...
Click to collapse
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!

yoderz said:
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!
Click to expand...
Click to collapse
Thanks, worked for me now. Super happy to luck out on timing so I could get unlocked & root, wish I had seen this earlier.
..Now, if only their forum would validate me. (Maybe a week timeout??)

yoderz said:
Took me over 6 hours to fix it. I finally found this post and it worked. I had to sign up for their forum, but it was worth it.
http://www.droidrzr.com/index.php/topic/45494-fxz-442-1834610/
Good luck!
Click to expand...
Click to collapse
so you have XT925 and this link helped you fix the install, and you're now on the official KK? does LTE and GSM work for you?

[RESTORE][TOT] Sprint LG LS991 ZV6 TOT

Hey guys,
Thanks for bringing this to my attention.
Be aware that this one includes factory reset protection. Those of you having issues trying to revert - this is probably why.
I forget how this works to revert but would check out the G3 forums to see how this was handled.
ZV6 (and now ZV5) location:
http://rwilco12.com/downloads.php?dir=Files/Devices/LG G4 (LS991)/
Sprint notes: https://community.sprint.com/baw/message/1009786

yes, as garwynn has pointed out... there will be issues downgrading if you flash this zv6 file.. or take the zv6 ota. the bootloader in zv6 updates the bootloader versioning to "v2".. while zv4 is "v0" and zv5 is "v1".
ZV6 TOT is out!
Thanks to @garwynn we now have the ZV6 TOT. I have also broken down the TOT and uploaded the individual partitions.
Changelog:
Minor User Interface updates
Google Security Patch: Stagefright and Factory Reset Protection applied
ZV6 also updates the bootloader version to "v2"
--TOT can be downloaded *HERE*
For those familiar with LG's.. this is flashed the same way as previous models... LG OG, G2, G3 etc etc.
1. Download LG Flash Tool. Swap the included mega.dll (click here to see video)
2. Download the LGFLASH_LG_G4_CODEFIRE.dll
3. Download the ZV6 TOT and unzip it.
4. If LG drivers are not already installed, download and install them.
5. Place phone into download mode
6. Set phones serial COM port to COM41 in Windows Device Manager. Unplug USB cable then plug it back in.
7. Run LG Flash Tool.
8. Select LGFLASH_LG_G4_CODEFIRE.dll for DLL, LS991ZV6_00.tot for TOT and check off "BOARD DL"
9. Hit OK to continue. Now hit the yellow start button. LG Flash Tool should now perform a CRC check on the TOT.
10. Unplug the USB cable again then plug it back in... wait 5-20 seconds and hopefully the flash should now start.
When it finishes it'll boot into miniOS. Hold the power button then press the "Normal Boot" option on the screen.
The above steps are "to the point" and there's not much hand holding so new LG flashers may be a bit confused. Feel free to ask questions in this thread and hopefully other users will chime in and assist with specific questions. But for extra help here is a how-to video going over the process. Only differences is phone model and TOT/DLL files used... rest can be applied.
Also here is a G4 Return to Stock thread... the lower section of the OP has step by step directions and screenshots for the entire LG Flash install process and TOT flash.
--Individual ZV6 partitions to flash manually can be downloaded *HERE*
--ZV5-to-ZV6 OTA update.zip *HERE*
You must be on ZV5 and have a stock recovery and stock system partition for this to work.
Directions:
1. Rename downloaded .zip into update.zip
2. Remove USB cable from phone.
3. Power phone off.
4. Press and hold volume down + power until you boot into stock recovery.
5. Select "update with adb"
Code:
adb sideload update.zip
Alternate Directions to skip using ADB (needs microSD card):
1. Format microSD card as EXT4.
2. Rename downloaded .zip to update.zip
3. Move update.zip onto external SD card.
4. Power off and boot into stock recovery (vol down + power)
5. Select the Update from SDCARD option.
Click to expand...
Click to collapse

very nice, now the soft Bricker can restore back to ZV6....

autoprime said:
nice
but yes, as garwynn has pointed out... there will be issues downgrading if you flash this zv6 file.. or take the zv6 ota. the bootloader in zv6 updates the bootloader versioning to "v2".. while zv4 is "v0" and zv5 is "v1". for some reason.. sprint/lg do not want you going back at all. this is somewhat odd that its been updated 2 versions.. as none of the other g4's (besides tmobile usa g4) are at "v2".. everyone else in usa seems to have stayed at "v1" despite multiple updates.
tl;dr
if you flash this.. then try flashing a downgraded bootloader or zv4/zv5 tot.. you will brick.
Click to expand...
Click to collapse
They're doing this because Factory Reset Protection only works if you can't go back to a version that doesn't support it. Easiest way to handle that? Blow a Qfuse (or increment the counter as LG and Samsung seem to be using it.)

garwynn said:
They're doing this because Factory Reset Protection only works if you can't go back to a version that doesn't support it. Easiest way to handle that? Blow a Qfuse (or increment the counter as LG and Samsung seem to be using it.)
Click to expand...
Click to collapse
ahh good point. I guess some of the other carriers already had FRP working then.

autoprime said:
ahh good point. I guess some of the other carriers already had FRP working then.
Click to expand...
Click to collapse
Just a quick question: FRP is that the security feature Google pushed so if one were to do a hardware factory reset the phone asks for your Google account before completing first boot after reset? Or is it the anti-rollback? Thanks.
Sent from my LGLS991 using Tapatalk

Swetnes said:
Just a quick question: FRP is that the security feature Google pushed so if one were to do a hardware factory reset the phone asks for your Google account before completing first boot after reset? Or is it the anti-rollback? Thanks.
Sent from my LGLS991 using Tapatalk
Click to expand...
Click to collapse
FRP is the google security feature to protect factory resets.
but there is ALSO anti-rollback being used and ZV6 raises the bootloader versioning +1 from ZV5... so the first time a ZV6 bootloader boots.. from that point on.. you can never go lower than ZV6 again. Without bricking anyway.

autoprime said:
FRP is the google security feature to protect factory resets.
but there is ALSO anti-rollback being used and ZV6 raises the bootloader versioning +1 from ZV5... so the first time a ZV6 bootloader boots.. from that point on.. you can never go lower than ZV6 again. Without bricking anyway.
Click to expand...
Click to collapse
Thank you for your response....that clears things up for me.
Sent from my LGLS991 using Tapatalk

Oh my god I already thanked you on twitter but thank you thank you thank you for your work. My phone is back from the dead!

Cant download update
When I click the link to download LS991_ZV5-ZV6_OTA_Update.zip I get a forbidden 403 error

Can someone please explain exactly what TOT means? I have been searching all over and can't find the meaning. Also, is there any way to flash to ZV6 and not update the bootloader so that ZV5 can be reinstalled if needed?

UPDATE i can miraculously get back into DL Mode and i tried again. This time the process took over 500 seconds only to say it failed again while doing an FBOOT CHECK and stays on the blue factory reset status screen with the number 2 in the center. I don't know what to dooooo ;w;

"ZV5-to-ZV6 OTA update.zip"
can I use this if I am still rooted but stock recovery? Or do I have to unroot.install.reroot?
thanks.

xMutant said:
"ZV5-to-ZV6 OTA update.zip"
can I use this if I am still rooted but stock recovery? Or do I have to unroot.install.reroot?
thanks.
Click to expand...
Click to collapse
No, you need to restore a Stock ZV5 image first.

xMutant said:
"ZV5-to-ZV6 OTA update.zip"
can I use this if I am still rooted but stock recovery? Or do I have to unroot.install.reroot?
thanks.
Click to expand...
Click to collapse
The TOT method resets the phone to stock - you will lose all data. Use this thread http://forum.xda-developers.com/sprint-g4/development/stock-sytem-image-files-zv5-zv6-t3205640 to restore the stock ZV5 image without losing data. You can then follow the same thread to sideload ZV6 and eventually flash the rooted ZV6 image with no loss of data. Make sure you always have the base image file saved to your internal (NOT sd card) storage.

Phantisy said:
Can someone please explain exactly what TOT means? I have been searching all over and can't find the meaning. Also, is there any way to flash to ZV6 and not update the bootloader so that ZV5 can be reinstalled if needed?
Click to expand...
Click to collapse
We have no way at this time to keep any part of ZV5 and mix with ZV6. TOT is a method of restoring the factory partitions back on your phone using the .tot files / extensions.
The tot file extension is related to the Google Android devices developed by LG and used for its firmware update files
Click to expand...
Click to collapse

Does anyone have any insight on this issue? I have the same problem as well
UPDATE: I figured it out through someone else's thread
If anyone gets the big 2 try these set of instructions in this thread
http://forum.xda-developers.com/lg-g3/general/problem-returning-to-stock-try-t2862463
---------- Post added at 03:22 AM ---------- Previous post was at 02:48 AM ----------
silvernirvash said:
UPDATE i can miraculously get back into DL Mode and i tried again. This time the process took over 500 seconds only to say it failed again while doing an FBOOT CHECK and stays on the blue factory reset status screen with the number 2 in the center. I don't know what to dooooo ;w;
Click to expand...
Click to collapse
try this method it worked for me
http://forum.xda-developers.com/lg-g3/general/problem-returning-to-stock-try-t2862463

hey friends I had a LGsetup wizard trouble after factory reset my g4 I followed all the steps I was on ZV6 and I download the zv6 tot from here, I have the drivers installed, LGFLASH_LG_G4_CODEFIRE.dll, port to COM41 in device manager, I have everything but after trying 5 or 6 times still does not work, I hope someone of you can help me and tell me what I do wrong thanks

AceD74 said:
Does anyone have any insight on this issue? I have the same problem as well
UPDATE: I figured it out through someone else's thread
If anyone gets the big 2 try these set of instructions in this thread
http://forum.xda-developers.com/lg-g3/general/problem-returning-to-stock-try-t2862463
---------- Post added at 03:22 AM ---------- Previous post was at 02:48 AM ----------
try this method it worked for me
http://forum.xda-developers.com/lg-g3/general/problem-returning-to-stock-try-t2862463
Click to expand...
Click to collapse
I try this method but when I got 76% the phone reboots in GENESIS-Mini OS3.1 testmode and stuck in 85% after 578sec the LG tools show me RED download FAIL again!! I do not know if it is normal if in LGflashtools show me the wrong model MSM8994! someone can give me the right files please or just a link to try another method

APN not working
Hi,
I have ZV4 rooted and make SIM unlock with thread
http://forum.xda-developers.com/sprint-g4/general/guide-sim-unlock-t3229801
Its work perfect.
And I run ZV5 TOT the update ZV6 OTA, phone didn't has internet (mobile data) anymore.
All wifi, call & sms works OK but no internet with mobile data.
I have already put right APN before, set network GSM/WCDMA/LTE auto,
still not appears LTE or H+ sign / symbol...
So confusing, hope some guys can helped me to solved it...
Thanks & appreciate for that....

Applying Firmware L09C02B128

Hi Guys,
I need a bit of help with my Huawei P9 Plus, which I purchased here in UK Vodafone.
The original firmware on the phone was VIE-L09C02B127.
However I had applied VIE-C900B103 - from one of the guides in this forum and I forgot to backup my oeminfo and custom files, does this mean that they are the still the original files for VIE-L09C02B127 ?
Also can someone help in getting my phone back to VIE-L09C02B128 please. I have got the firmware L09C02B128 from a German site, can someone here able to check it and confirm if it this the same as the UK one ?
I can upload the firmware if someone can tell me how to ?
Thanks in advanced,
Bashy

I would appreciate it if you could upload it thanks (been waiting for B128 in SA and it just doesnt arrive due to our useless carriers), think you can put it in Google drive, Dropbox, Mega etc and then just share the link, thats probably the easiest.
In terms of flashing you need to unroot (via SuperSU) then install stock recovery (if you have twrp installed), then see http://forum.xda-developers.com/p9-...ei-p9-plus-vie-l09-update-app-t3384951/page11 for installing.

Applying firmware L09C09B128
Hi Jostian,
Here is the link https://mega.nz/#!8UsBhQAL!QT67L7uCsjbj0vNXT0vSLbksZRx9znv8aVlje2IvT_o
Also in regard to applying this firmware onto my phone I am not rooted nor I have trwp installed.
So do I just copy the .app file onto my memory card and put it in the dload folder ?
Thanks in advanced.
Bashy
Jostian said:
I would appreciate it if you could upload it thanks (been waiting for B128 in SA and it just doesnt arrive due to our useless carriers), think you can put it in Google drive, Dropbox, Mega etc and then just share the link, thats probably the easiest.
In terms of flashing you need to unroot (via SuperSU) then install stock recovery (if you have twrp installed), then see http://forum.xda-developers.com/p9-...ei-p9-plus-vie-l09-update-app-t3384951/page11 for installing.
Click to expand...
Click to collapse

Awesome, many thanks
from my P9 Plus

Jostian said:
Awesome, many thanks
from my P9 Plus
Click to expand...
Click to collapse
Hi Jonathan,
Let me know how it goes?
Also I would have custom.bin and oeminfo files changed from L09C09B127 when I flashed the full update too L09C900Bxx ?
If so can you provide me you files please.
Bashy
Sent from my Nexus 5 using XDA-Developers mobile app

Bash25 said:
Hi Jonathan,
Let me know how it goes?
Also I would have custom.bin and oeminfo files changed from L09C09B127 when I flashed the full update too L09C900Bxx ?
If so can you provide me you files please.
Bashy
Sent from my Nexus 5 using XDA-Developers mobile app
Click to expand...
Click to collapse
not sure if yr custom bin and oem would be different but will try get mine (should not be hard) and upload for you,

Jostian said:
I would appreciate it if you could upload it thanks (been waiting for B128 in SA and it just doesnt arrive due to our useless carriers), think you can put it in Google drive, Dropbox, Mega etc and then just share the link, thats probably the easiest.
In terms of flashing you need to unroot (via SuperSU) then install stock recovery (if you have twrp installed), then see http://forum.xda-developers.com/p9-...ei-p9-plus-vie-l09-update-app-t3384951/page11 for installing.
Click to expand...
Click to collapse
Hi Jostian,
I am not root and nor I have twrp installed. However I did the below and my firmware is still showing VIE-L09C900B103;
1) Copied the update file on to my memory card and put in in the dload folder.
2) Restarted the phone, whilst holding down the volume up and down.
3) The phone installed the file from the memory card.
Can you please confirmed how you did it mate step by step.
Thanks,
Bashy

Bash25 said:
Hi Jostian,
I am not root and nor I have twrp installed. However I did the below and my firmware is still showing VIE-L09C900B103;
1) Copied the update file on to my memory card and put in in the dload folder.
2) Restarted the phone, whilst holding down the volume up and down.
3) The phone installed the file from the memory card.
Can you please confirmed how you did it mate step by step.
Thanks,
Bashy
Click to expand...
Click to collapse
Hi Bashy, cos you are unrooted your phone will only show new 128 if you install full 128 ROM, dont think you can install update (b128) over b103 and get update to B128 in build number.
Did you try the *#*#2846579#*#* this opens menu options- press "SDCard Upgrade" then "Ok" method (give it a try), I unzipped yr file (6 or 7 files inside) copied these all to the 'dload' folder I created on the ext SD Card, then used the *#*# ..... method to update, the update like yours was successful (completed and I see a bunch of new apps etc.) but I still see B127 in settings/about phone/build number... so not sure why build no. remains B127???
I think the best would be to somehow find the full B128 ROM and flash it or for the B128 update to be put into a flashable (twrp) zip, but because the P9Plus is so new these options not available yet, they will come but it will take a bit of time.

Hi Guys,
the ota update failed on my phone. SO it didn't install any apps just changed the version info so basically It says b128 and cant find any new updates..
I downloaded the b128 voda update from a german site.
How do I install it?
putting the ZIP file into the DL folder and copy the updater.app from it to the DL folder
or
Do I need to extract the contents of the ZIP as well?
Thank you!
Best,
---------- Post added at 06:30 PM ---------- Previous post was at 05:33 PM ----------
mR.fR34ky said:
Hi Guys,
the ota update failed on my phone. SO it didn't install any apps just changed the version info so basically It says b128 and cant find any new updates..
I downloaded the b128 voda update from a german site.
How do I install it?
putting the ZIP file into the DL folder and copy the updater.app from it to the DL folder
or
Do I need to extract the contents of the ZIP as well?
Thank you!
Best,
Click to expand...
Click to collapse
I've manage to run teh update with the *#*# command but the application didn't install!!!! ((((
DO you guys have any idea?
Thanks a lot!

I got the same thing mate.
Bashy
Sent from my Nexus 5 using XDA-Developers mobile app

you need to extract the files from the zip, should be 2 files (Update.app and Meta-info) you put those 2 in the dload folder and then use the *#*#.... (project menu to install), remember you must be on stock recovery and phone must not be rooted.

Jostian said:
you need to extract the files from the zip, should be 2 files (Update.app and Meta-info) you put those 2 in the dload folder and then use the *#*#.... (project menu to install), remember you must be on stock recovery and phone must not be rooted.
Click to expand...
Click to collapse
Hi Jostian,
Should apply the C432B161?
Bashy
Sent from my Nexus 5 using XDA-Developers mobile app

That's the one i used yes
Sent from my VIE-L09 using Tapatalk

Jostian said:
That's the one i used yes
Sent from my VIE-L09 using Tapatalk
Click to expand...
Click to collapse
Thanks bro. I got my phone updated to L09C432B161.
Sent from my Nexus 5 using XDA-Developers mobile app

Bash25 said:
Thanks bro. I got my phone updated to L09C432B161.
Sent from my Nexus 5 using XDA-Developers mobile app
Click to expand...
Click to collapse
HI Bash25,
Did you just "flash" the c432b161? or unlocked the bootloader, installed custom recovery, rooted, changed oem info etc..???
(I dont have much experience with huawei phones...)
Thanks,
fr34ky

Think you need to do it the long way, don't think the flash will succeed if you just try flash over different variant code
sent from my P9+

Yep. Thanks

mR.fR34ky said:
HI Bash25,
Did you just "flash" the c432b161? or unlocked the bootloader, installed custom recovery, rooted, changed oem info etc..???
(I dont have much experience with huawei phones...)
Thanks,
fr34ky
Click to expand...
Click to collapse
Hi mate,
So for the delay in responding back.
My phone was did not have the bootloader unlocked and nor it was rooted.
However I did try to root it to change the 2 files over. But I can't confirm 100% worked.
Only way I would know this these 2 files were correctly updated is to check. I am not sure how too, but if someone can show then this would be great.
Bashy
Sent from my Nexus 5 using XDA-Developers mobile app

Bash25 said:
Hi mate,
So for the delay in responding back.
My phone was did not have the bootloader unlocked and nor it was rooted.
However I did try to root it to change the 2 files over. But I can't confirm 100% worked.
Only way I would know this these 2 files were correctly updated is to check. I am not sure how too, but if someone can show then this would be great.
Bashy
Click to expand...
Click to collapse
Which fw are you on now? Do you need help with something? Since then I figured it out (with some help) how to fix all of the out standing issues..

mR.fR34ky said:
Which fw are you on now? Do you need help with something? Since then I figured it out (with some help) how to fix all of the out standing issues..
Click to expand...
Click to collapse
Thanks. I need written instructions on how to change the ro.xxx file in the video is it not very clear.
Currently I am on L09C432B161.
Also how can a verify if my oeminfo and custom files are correctly showing the correct version?
Bashy
Sent from my Nexus 5 using XDA-Developers mobile app