Mod edit: content removed
Is it really safe to flash this via twrp with unlocked bootloader? i just bricked it with the new released global beta :/
edit: did the bootloader unlock with this, not the official way!
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-instruction-unlock-bootloader-t3355904
It says: “DON'T FLASH MIUI RECOVERY ZIP ROM VIA TWRP after unlocking bootloader. IT HAS
STOCK BOOTLOADER AND IT WILL BE RELOCK BOOTLOADER AND THEN BOOTLOOP . Only use
Fastboot ROM and that too replace the unlocked bootloader file.
And this exactly happened to me :E
Thanks!
neme2k said:
Is it really safe to flash this via twrp with unlocked bootloader? i just bricked it with the new released global beta :/
edit: did the bootloader unlock with this, not the official way!
http://forum.xda-developers.com/redmi-note-3/how-to/unlock-instruction-unlock-bootloader-t3355904
It says: “DON'T FLASH MIUI RECOVERY ZIP ROM VIA TWRP after unlocking bootloader. IT HAS
STOCK BOOTLOADER AND IT WILL BE RELOCK BOOTLOADER AND THEN BOOTLOOP . Only use
Fastboot ROM and that too replace the unlocked bootloader file.
And this exactly happened to me :E
Thanks!
Click to expand...
Click to collapse
For bricked phone , you can go here :
http://en.miui.com/thread-235865-1-1.html
Luckily the phone was in adb mode while stuck at boot logo, so i could get in edl mode i just need to know if it is safe to flash this rom!
neme2k said:
Luckily the phone was in adb mode while stuck at boot logo, so i could get in edl mode i just need to know if it is safe to flash this rom!
Click to expand...
Click to collapse
yes its safe , I have Already Installed on my phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was wondering if there is a cracked boot.img for the new Global ROM(update) 7.2.3.0.
I am running Global 7.1.8.0 , unlocked, rooted with TWRP. I would like to flash the update but I cannot find a cracked boot.img
I am really hoping this 7.2.3.0 will solve my network issues
Thanks!
I found the following thread on the MIUI Homepage. I flashed two ROM's successfully by following the instructions written in this thread. Read everything carefully and your phone will not brick.
Here is the link:
http://en.miui.com/thread-256464-1-1.html
@admin: I hope it is allowed to post the adress here!?
This rom is not at all stable, dont migrate to it, first of all the A72 cores are always running at 1.8 mhz, which is heating cpu and draining battery, restarts solves it but it happens again, the whole rom is quite laggy, fingerprint applock doesnt work properly, when you open a app through fp and close it, the app doesnt get relock, no password prompts from next time, once you reboot after the rom is flashed, the recent button automatically changes to menu button. Only one improvement is the camera quality in low light
Special thanks to you man
I have flashed this ROM , its So nice and Stable , everything is working amazingly , thanks a ton , my phone unbricked finally with this ROM , Great Post :good:
Redmiman said:
I have flashed this ROM , its So nice and Stable , everything is working amazingly , thanks a ton , my phone unbricked finally with this ROM , Great Post :good:
Click to expand...
Click to collapse
Your welcome
Redmiman said:
I have flashed this ROM , its So nice and Stable , everything is working amazingly , thanks a ton , my phone unbricked finally with this ROM , Great Post :good:
Click to expand...
Click to collapse
how did you unbrick with this rom?
does this update resolves network issue? please reply.
btw duplicate thread, I already posted this here http://forum.xda-developers.com/redmi-note-3/development/download-links-miui-7-2-3-0-update-t3358721 as of xda forum rules please dont make a thread of things that already posted. kindly close this thread
Rajdip said:
how did you unbrick with this rom?
Click to expand...
Click to collapse
convert zip to tgz using ubuntu ( making boot.img), then flash it by miflah
Mohan0004 said:
does this update resolves network issue? please reply.
Click to expand...
Click to collapse
yes its solved
mura20 said:
I was wondering if there is a cracked boot.img for the new Global ROM(update) 7.2.3.0.
I am running Global 7.1.8.0 , unlocked, rooted with TWRP. I would like to flash the update but I cannot find a cracked boot.img
I am really hoping this 7.2.3.0 will solve my network issues
Thanks!
Click to expand...
Click to collapse
Yes there is a cracked boot.img, I found it on 4pda....
razorinc said:
Yes there is a cracked boot.img, I found it on 4pda....
Click to expand...
Click to collapse
The 4pda seems to be in Russian. I don't speak Russian. Would you please send me a link for this boot.img or upload it somewhere?
Thank you so much
mura20 said:
The 4pda seems to be in Russian. I don't speak Russian. Would you please send me a link for this boot.img or upload it somewhere?
Thank you so much
Click to expand...
Click to collapse
There is a tutorial at miui forum for making cracked boot.img using android image kitchen,it is an easy process.
mura20 said:
I was wondering if there is a cracked boot.img for the new Global ROM(update) 7.2.3.0.
I am running Global 7.1.8.0 , unlocked, rooted with TWRP. I would like to flash the update but I cannot find a cracked boot.img
I am really hoping this 7.2.3.0 will solve my network issues
Thanks!
Click to expand...
Click to collapse
all cracked boot.img are here :
http://miuidroid.com/rn3/boot_images/
A thread for this already exists here:
http://forum.xda-developers.com/redmi-note-3/development/download-links-miui-7-2-3-0-update-t3358721
Please do not create duplicate threads. Thread closed.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is for anyone having issues with latest Voo-Doo unlocking tool and LG6, LG8 and newer updates.
Latest Samsung updates has broken Voo-Doo unlocking tool, forcing SIM-locked users to use Voo-Doo to deactivate SIM-LOCK on each device boot.
Here is small fix that will prevent your device from re-locking on each boot. Voo-Doo unlocking tool is still needed for first unlock.
Flash in CWM Recovery.
>>> Download here <<<
Have fun and please share your feedback!
PS. Thanks to MuertoKo for helping me searching and testing this fix!
Mike you are a machine...
(sent through internet)
mike1986. said:
This is for anyone having issues with latest Voo-Doo unlocking tool and LG6, LG8 and newer updates.
Latest updates broken Voo-Doo unlocking tool forcing SIM-locked users to use Voo-Doo on each device boot.
Here is small fix that will prevent your device from re-locking on each boot. Voo-Doo unlocking tool is still needed for first unlock.
Download here
Have fun and please share your feedback!
PS. Thanks to MuertoKo for helping me searching and testing this fix!
Click to expand...
Click to collapse
Ty for mention It's really apreciated that even without having the device you managed to fix it mate
Keep good testing!
thanks man this was driving me crazy..few questions though:
1 does this fix the problem permenatly?if we update to new firmware will it be unlocked?
2 can we back up efs to save the value so we won't have to repeat this procedure everytime we update the firmware?
Thank you !!!!
skivnit said:
thanks man this was driving me crazy..few questions though:
1 does this fix the problem permenatly?if we update to new firmware will it be unlocked?
2 can we back up efs to save the value so we won't have to repeat this procedure everytime we update the firmware?
Click to expand...
Click to collapse
1) new firmwares are 90% patched... so u might lose it... when a new firmware comes out...
2) don't worry if new firmwares comes out some 1 will fix them..
(sent through internet)
skivnit said:
thanks man this was driving me crazy..few questions though:
1 does this fix the problem permenatly?if we update to new firmware will it be unlocked?
2 can we back up efs to save the value so we won't have to repeat this procedure everytime we update the firmware?
Click to expand...
Click to collapse
1. It depends. If Samsung will update relevant library then you will need to re-apply the fix. I'm currently working on some 100% permanent solution.
2. This fix has nothing to do with EFS partition.
Awesome stuff! :victory:
So now im just curious, What was the cause exactly ?
mike1986. said:
1. It depends. If Samsung will update relevant library then you will need to re-apply the fix. I'm currently working on some 100% permanent solution.
2. This fix has nothing to do with EFS partition.
Click to expand...
Click to collapse
ImraanK said:
Awesome stuff! :victory:
So now im just curious, What was the cause exactly ?
Click to expand...
Click to collapse
I will explain it more once I do some more investigation
there's something i don't get though my phone never gave me network problems it's factory unlocked why is it suddenly getting locked?up til lfb i used many SIM cards no problem
skivnit said:
there's something i don't get though my phone never gave me network problems it's factory unlocked why is it suddenly getting locked?up til lfb i used many SIM cards no problem
Click to expand...
Click to collapse
I think only Samsung can answer this question
Great Job works perfect!!
Sent from my GT-I9300 using xda premium
Pretty nice work mate.
This must be a bug in latest roms. I have a factory unlock s3 and suddenly it started asking me for the sim unlock code?! what sim unlock code?!?! lol.
First time in life that I have to use an unlock method for a...factory unlocked phone. Crazy ****! Well at least it works. Downgrading fixes the problem too.
Using Omega latest rom here.
Joao Oliveira said:
This must be a bug in latest roms. I have a factory unlock s3 and suddenly it started asking me for the sim unlock code?! what sim unlock code?!?! lol.
First time in life that I have to use an unlock method for a...factory unlocked phone. Crazy ****! Well at least it works. Downgrading fixes the problem too.
Using Omega latest rom here.
Click to expand...
Click to collapse
Downgrading should fix it too, i think Mike is using LG1 library (libsec-ril.so), nice catch Mike :thumbup: .
Sent from my GT-I9300 using Tapatalk 2
wanam said:
Downgrading should fix it too, i think Mike is using LG1 library (libsec-ril.so), nice catch Mike :thumbup: .
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Correct mate!
yo Mike , i just wanna ask something so if we flash another rom do we have to flash your fix as well? thank you
Repulsa said:
yo Mike , i just wanna ask something so if we flash another rom do we have to flash your fix as well? thank you
Click to expand...
Click to collapse
Yes
Quick question are the latest rom official o leaked? Its strange that even factory unlocked phone are set as locked after upgrade!
Joao Oliveira said:
Quick question are the latest rom official o leaked? Its strange that even factory unlocked phone are set as locked after upgrade!
Click to expand...
Click to collapse
LG6 and LG8 are both official updates.
someone has a tip for me for rooting my new dual sim moto g 2014...
thx in advance
UPDATE: BOOTLOADER UNLOCKED.
EDIT: If anyone else will try
Click here: >>> UNLOCK YOUR MOTO G 2014 BOOTLOADER
MarcusBremen said:
someone has a tip for me for rooting my new dual sim moto g 2014...
thx in advance
Click to expand...
Click to collapse
Try the eroot software first.
http://forum.xda-developers.com/showthread.php?t=2219781
PS: have you got the phone already?
yes since yesterday... here in germany with an online seller.
but the eroot method is for sony ericsson, not a motorola...
don't wanna brick it the second day.
even i want to know how to root.. do we need to unlock bootloader?
standard procedure is to unlock bl and then root...
Custom Recovery
Please make and provide one custom recovery for Moto G2. I unlocked the bootloader. But the old custom recoveries are not working. Need to root it asap.!!
ok little update.
bootloader unlocked...
but neither
-towelroot
-framaroot
-eroot
-superboot
-or mototool
worked...
so i think i have to wait ...
MarcusBremen said:
ok little update.
bootloader unlocked...
Click to expand...
Click to collapse
how ? , is same method working Which we use for other moto devices ?
yes the motorola page for unlocking bootloaders... get your code via fastboot and the re-code via email from motorola... worked for me.
MarcusBremen said:
yes the motorola page fur unlocking bootloaders... get your code via fastboot and the re-code via email from motorola... worked for me.
Click to expand...
Click to collapse
wait a sec, if you unlocked bootloader, couldn't you just flash a rooted kernel.
edit: Try these superoneclick and one click root
mnishamk said:
wait a sec, if you unlocked bootloader, couldn't you just flash a rooted kernel.
Click to expand...
Click to collapse
FIRST YOU NEED A RECOVERY TO FLASH THE SUPERSU.ZIP TO GET ROOT; then you can flash roms and kernels...
edit: Try these superoneclick and
one click root´
Click to expand...
Click to collapse
Superoneclick="FOR GINGERBREAD AND EARLIER DEVICES" (i wanna root 4.4.2) BTW THREAD CLOSED, no need for a try
One Click Root=LATER WHEN I'M ON MY PC
MarcusBremen said:
FIRST YOU NEED A RECOVERY TO FLASH THE SUPERSU.ZIP TO GET ROOT; then you can flash roms and kernels...
Click to expand...
Click to collapse
Well i came from xperia, and used to flash kernels from my pc only(even if stock recovery not available), thats why i said. besides its a moot point since no rooted kernels are available yet
mnishamk said:
Well i came from xperia, and used to flash kernels from my pc only(even if stock recovery not available), thats why i said. besides its a moot point since no rooted kernels are available yet
Click to expand...
Click to collapse
if you flash your kernels via fastboot, e-thing is fine... i didn't use adb for years, so something new to me to learn it again.
Can anyone try with towelroot.com ?!? It doesn't harm the phone...
onesolo said:
Can anyone try with towelroot.com ?!? It doesn't harm the phone...
Click to expand...
Click to collapse
Already tried not working
got my phone and unlocked bootloader via site. so that works. now to find a rooting method that works.
---------- Post added at 05:12 PM ---------- Previous post was at 04:33 PM ----------
it has an option recovery in fastboot mode. When i click on it, it just turns off the phone
I had requested teamex but unfortunately he is busy so couldn't build ..I tried porting from old moto g no luck ..I'm getting invalid flash partition error
suhas.holla said:
I tried porting from old moto g no luck ..I'm getting invalid flash partition error
Click to expand...
Click to collapse
same here...
edit: clockworkmod.com gives nothing, seems the mg² is too new for the community...
Anyone knows if there's anyone working on new Moto G root?
I have a XT1069 (Dual SIM DTV)...
Finally Rooted the new Moto G with my custom recovery ..will soon post the guide
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AOnePro is the first android one flashtool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supported Devices:
Micromax Canvas A1
Karbonn Sparkle V
Spice Dream UNO
Nexian Journey One
Symphony Roar A50
Evercoss One X
Mito Impact
MyPhone Uno
Cherry Mobile One
Even other android devices with accessible bootloader
Features:
One click Unlock or Relock Bootloader
One click 3 custom recoveries
One click flash stock rom
One click flash ota update.zip
One click factory reset
Separately flash different partition
And many more.........
Requirements
.NET 4.0 Click here
How To Use:
⦁Turn ON USB Debugging Mode under Setting>>Developer options
⦁Open AOnePro
⦁Click List Devices button, your device will be listed, if not the then install adb drivers. Generally the adb drivers gets automatically installed in windows 8 or above (with active internet).
⦁One click flash.
* Note :Before flashing you need to be in the fastboot mode. One click flash only flashes system, boot and recovery. If your trying to install the same ROM that was installed earlier then it's fine. If trying to Upgrade or downgrade, then you need to flash the bootloader too. Flashing bootloader option is available in the software.
Unlocking/Relocking Bootloader:
*Note: Unlocking bootloader will Wipe/format Userdata
⦁Click on List device just to make sure your device is properly connected to adb
⦁Click on 'Reboot To fastboot'. Wait for the device to reboot to fastboot, then click on the 'Unlock Bootloader' to unlock and 'Relock Bootloader' to relock.
⦁Press Vol+ key on your on phone to confirm Unlocking/ Relocking
Phone will be reboot and may take some time to Boot.
To confirm bootloader is unlocked, during power on process the splash screen will show 'oem unlocked' and vice-versa.
DONE
Now you can Install Custom recovery
Flashing Recovery:
Make Sure your device Bootloader is Unlocked
⦁Click on List device and see your device is listed
⦁Click on 'Reboot To fastboot'. Wait for the device to reboot to fastboot.
⦁Click on button of the type of recovery you want to flash.
Wait for few seconds device will boot in normal mode
DONE
You can Boot to your recovery by clicking on "Reboot to Recovery" button
Now can Root your Unlocked Bootloader device.
Credit:
@varun.chitre15 for the Recoveries.
@musfiqus for the Recoveries
Disclaimer:
I Am Not Responsible For Any Damage Caused To your Phone.
Try at your own risk...
Download Link
AOnePro V1.0.0 Click Here
Click on the thanks button if you like our work
Contact us at : [email protected]
Visit us at www.zedsofts.net
Note : This app don't contain the stock rom. You need to download and extract the rom into the installation folder.
Nice work sir
rezzamzein said:
Nice work sir
Click to expand...
Click to collapse
I'm glad that you liked the work
Nice work @androidoverdoze
arka2k14 said:
Nice work @androidoverdoze
Click to expand...
Click to collapse
Thnx dude
AOnePro V2 Is Here
AOnePro V2 is here with the android one ROM in it.
With a more refreshed GUI the AOnePro V2 looks real pro.
With the built in android one ROM you don't need to download the ROM.
Happy Flashing!
Download link : AOnePro V2 (435 MB)
Also download the update patch from here.
Contact us at : [email protected]
Website : www.zedsofts.net
Thank u very much final it's easy to flash like odin tool Thank u very much u helped me a lot and thanks for sharing with xda keep it up
sunny3503 said:
Thank u very much final it's easy to flash like odin tool Thank u very much u helped me a lot and thanks for sharing with xda keep it up
Click to expand...
Click to collapse
I am very glad that my work helped you. Thanks for your complement.
great work
navjot703 said:
great work
Click to expand...
Click to collapse
Thank you
Sir,I use CM13 latest nightly.I am having my front camera upside down since 14th March.I don't know why.And now i flashed many rom including stock rom.But problem still remain..If i flash with this app and relock OEM,will the problem be gone?
Rakibboss said:
Sir,I use CM13 latest nightly.I am having my front camera upside down since 14th March.I don't know why.And now i flashed many rom including stock rom.But problem still remain..If i flash with this app and relock OEM,will the problem be gone?
Click to expand...
Click to collapse
I have never met with this problem. Just give it a try. May be it could help you. Just flash all the files from the ROM flashing menu.
Okay.i will try.Thanks for this.
---------- Post added at 06:46 AM ---------- Previous post was at 06:40 AM ----------
Should i flash first or lock OEM first?
Rakibboss said:
Okay.i will try.Thanks for this.
---------- Post added at 06:46 AM ---------- Previous post was at 06:40 AM ----------
Should i flash first or lock OEM first?
Click to expand...
Click to collapse
OEM locking or unlocking not needed. Just flash it.
Is it support any stock rom for flash costume recovery?
Sent from my Redmi 3 using XDA-Developers mobile app
mig33 said:
Is it support any stock rom for flash costume recovery?
Sent from my Redmi 3 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, you can. But before that you need to unlock your bootloader.
i dont know how to use this tool.. can anyone make a video and explain all features of this tool....... this will help us a lot..
muthur774 said:
i dont know how to use this tool.. can anyone make a video and explain all features of this tool....... this will help us a lot..
Click to expand...
Click to collapse
Ok I will post a video soon
androidoverdoze said:
Ok I will post a video soon
Click to expand...
Click to collapse
Thank you
I managed to solve camera problem.But now my internal memory is showing 2gb and something. Can anybody give me OEM of Symphony Roar A50 of Marshmallow
hello guys,
since i look like the FIRST with this smartphone i'll report here my first attempt to gain root
using MAGISK via patching the BOOt.IMG !
i tried with magisk 22.1 - 23.0 but same result: FAILURE !
i end up in boot loop ! i even re isntalled miui 12.0.8 just to be sure i would get exactly the original boot.img to patch but that did not help!
(RKSEUXM) !!
If any of you could install TWRP or root this device pls let me know !
thank you
simika said:
hello guys,
since i look like the FIRST with this smartphone i'll report here my first attempt to gain root
using MAGISK via patching the BOOt.IMG !
i tried with magisk 22.1 - 23.0 but same result: FAILURE !
i end up in boot loop ! i even re isntalled miui 12.0.8 just to be sure i would get exactly the original boot.img to patch but that did not help!
(RKSEUXM) !!
If any of you could install TWRP or root this device pls let me know !
thank you
Click to expand...
Click to collapse
Did you unlock your bootloader first? I think I'll go with this first (see me again in 7 days lol)
If you unlock BL, you can get root using MTK exclusive Msgisk. This is machine translation
Adzetko said:
Did you unlock your bootloader first? I think I'll go with this first (see me again in 7 days lol)
Click to expand...
Click to collapse
was the first thing i did!! lol
[email protected] said:
If you unlock BL, you can get root using MTK exclusive Msgisk. This is machine translation
Click to expand...
Click to collapse
ah... this is something new ! i didn't know there was a MTK exclusive magisk.. i'm gonna have a look right now ! thank you
If you will see https://github.com/topjohnwu/Magisk/issues/3042 , the problem is fixed from 21.2 version.
[email protected] said:
If you unlock BL, you can get root using MTK exclusive Msgisk. This is machine translation
Click to expand...
Click to collapse
my friend, i've been looking around but i didn't find a "special magisk " edition for mtk.. could you please give me some more info where to look at ? thank you
Maybe someone knows when camellian will get twrp or any other custom recovery? Thanks
simika said:
my first attempt to gain root
using MAGISK via patching the BOOt.IMG !
i tried with magisk 22.1 - 23.0 but same result: FAILURE !
Click to expand...
Click to collapse
Hi, have you tried to patch boot.img like it says here? https://www.getdroidtips.com/root-poco-m3-pro-5g/
The root has to work with MIUI and we need vbmeta.img to use with patched boot.img. We do not have vbmeta.img prepared for this device , I afraid .
amilt0n said:
Hi, have you tried to patch boot.img like it says here? https://www.getdroidtips.com/root-poco-m3-pro-5g/
Click to expand...
Click to collapse
I tried but I've got bootloop
Tomek0000 said:
If you will see https://github.com/topjohnwu/Magisk/issues/3042 , the problem is fixed from 21.2 version.
Click to expand...
Click to collapse
i did read.. but than how come with v23 problem persist? or you mean I should use v21. 2?
@simika hi can you confirm is this device having mtk engineering mode support and does it have LTE Band lock in mtk engineering mode I m purchasing this devices and I want band locking
DarkSoul20 said:
@simika hi can you confirm is this device having mtk engineering mode support and does it have LTE Band lock in mtk engineering mode I m purchasing this devices and I want band locking
Click to expand...
Click to collapse
let me know how can I check those info for you and I'll be glad to help! I don't know how to access MTK engineering mode
It's easy you can install app from playstore for opening mtk mode search mtk engineering mode in playstore or u can use dialer type *#*#3646633#*#* and pls send me screen shot thank you very much
simika said:
let me know how can I check those info for you and I'll be glad to help! I don't know how to access MTK engineering mode
Click to expand...
Click to collapse
let me know ifit's this the page you are looking for !
if you need other info please specify exactly which part of menu you refer !
i hope it helps !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This msgisk got root successfully on my Redmi 10x 5G (MIUI 12.5) Android 11(MTK 820), but I'm not sure yours will work as well, if you want to load it, you'd better back up your boot, this is machine translation
[email protected] said:
This msgisk got root successfully on my Redmi 10x 5G (MIUI 12.5) Android 11(MTK 820), but I'm not sure yours will work as well, if you want to load it, you'd better back up your boot, this is machine translation
Click to expand...
Click to collapse
PLease
[email protected] can you tell me which commands?how to install? i do NOT have twrp .. please let me know so I can try thank you ( or anyone else who knows how to install this magisk zip without twrp )
simika said:
i did read.. but than how come with v23 problem persist? or you mean I should use v21. 2?
Click to expand...
Click to collapse
Maybe ? I patched boot for redmi 9 without problem. I do not remember the version but it could be 21.4 . But I used vbmeta.img special prepared for redmi 9 .
Patching boot.img should be enough for custom rom but not for use MIUI.
Tomek0000 said:
Maybe ? I patched boot for redmi 9 without problem. I do not remember the version but it could be 21.4 . But I used vbmeta.img special prepared for redmi 9 .
Patching boot.img should be enough for custom rom but not for use MIUI.
Click to expand...
Click to collapse
hey Tomek,
one guy gave me just a magisk zip where vbmeta.img is present ! Could you please tell me how to install it ?
i don't have twrp ! thank you
Ok guys per request i will post my personal Pixel 7 lineage rom . Is update to december and it has the minimal gapps built inline . I will call it Beta but all i use daily is working for me . I know face unlock is not working because never add the commits . It wont pass the safety net unless rooted but again i dont use it , also all apps from play-store are working . Maybe will update maybe not will see . Cheetah is booting too but apps is force close and cant fix now because i dont got the device . So please dont ask a lot of questions ! Installing is simple , be on December , wipe factory default from recovery and fastboot update the name.zip .
kernel surce https://github.com/LineageOS/android_kernel_google_gs201
vendor surce https://gitlab.com/the-muppets/proprietary_vendor_google_panther
Dt surce https://github.com/LineageOS/android_device_google_pantah
Here is the link to my google drive : https://mega.nz/file/I0J2wa7J#2_AYh0jC5UEk3Lmcf5DY1k8WWMKubCmB15yI-vGtza0
Will need a cheetah experienced user who can take some adb logs , sometimes this weekend.
@alin919 Please check your PM inbox. Thank you.
-Regards: Badger50
Is it possible to update from lineage-20.0-20221117-UNOFFICIAL-panther.zip?
fischli said:
Is it possible to update from lineage-20.0-20221117-UNOFFICIAL-panther.zip?
Click to expand...
Click to collapse
Yes
hi, is it possible to have builds without gapps built in?
will this work on january update?
I don't want to do a full wipe. It would be nice to have a ROM like the one from November, which you can simply install in recovery. Too bad it probably won't be available any time soon.
fischli said:
I don't want to do a full wipe. It would be nice to have a ROM like the one from November, which you can simply install in recovery. Too bad it probably won't be available any time soon.
Click to expand...
Click to collapse
I might update this weekend .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
alin919 said:
View attachment 5821337
Click to expand...
Click to collapse
This is exciting. How's the battery life? I'm not too impressed with the stock ROM battery performance. I unlocked my bootloader just waiting to hear some feedback before I try it.
mewcatchew said:
This is exciting. How's the battery life? I'm not too impressed with the stock ROM battery performance. I unlocked my bootloader just waiting to hear some feedback before I try it.
Click to expand...
Click to collapse
Lineage always got better battery life then stock
alin919 said:
Lineage always got better battery life then stock
Click to expand...
Click to collapse
alin919 said:
Lineage always got better battery life then stock
Click to expand...
Click to collapse
Ok, where can I get it? the mega.nz file is from Jan 5th
mewcatchew said:
Ok, where can I get it? the mega.nz file is from Jan 5th
Click to expand...
Click to collapse
Will update tonight .
Updated to January ........
I appreciate the work! I've downloaded your updated build, bootloader is unlocked & ready to flash,,, Just not sure how to flash it (I'm good at following directions). I really haven't done much flashing since the Galaxy S5 & S6, and that was with Odin. I'm guessing with the Pixel 7 it's done with some fastboot commands and pretty simple, just don't know the procedure.
mewcatchew said:
I appreciate the work! I've downloaded your updated build, bootloader is unlocked & ready to flash,,, Just not sure how to flash it (I'm good at following directions). I really haven't done much flashing since the Galaxy S5 & S6, and that was with Odin. I'm guessing with the Pixel 7 it's done with some fastboot commands and pretty simple, just don't know the procedure.
Click to expand...
Click to collapse
check the OEM unlock box on dev options, then reboot to fastboot
fastboot flashing unlock
fastboot -w update name_of_rom.zip
MarcLmao said:
check the OEM unlock box on dev options, then reboot to fastboot
fastboot flashing unlock
fastboot -w update name_of_rom.zip
Click to expand...
Click to collapse
Bootloader is already unlocked. So just one command "fastboot -w update name_of_rom.zip" ? Do I need to factory reset before I boot or anything?
There are flashing instructions on this, the command I supplied is wrong, my mistake Its a build for Panther and Cheetah, ive used his roms in the past and can vouch for them
[ROM][UNOFFICIAL][cheetah/panther] LineageOS 20.0 for the Pixel 7 Pro/7
LineageOS 20.0 for the Pixel 7 Pro (cheetah) and Pixel 7 (panther). Known issues: NOTE: This is an early-stage build, and may not be the most stable. It works fine for me as a daily driver on a Pixel 7 (panther), however. The status bar is...
forum.xda-developers.com
mewcatchew said:
Bootloader is already unlocked. So just one command "fastboot -w update name_of_rom.zip" ? Do I need to factory reset before I boot or anything?
Click to expand...
Click to collapse
MarcLmao said:
There are flashing instructions on this, the command I supplied is wrong, my mistake Its a build for Panther and Cheetah, ive used his roms in the past and can vouch for them
https://forum.xda-developers.com/t/...h-panther-lineageos-20-0-for-the-pixel-7-pro-
Click to expand...
Click to collapse
*EDIT" Just tap power & up keys for half a second. I was long pressing them.
How do I boot into recovery from fastboot? I can select " Recovery mode" but it boots a dead android and under it says "no command" . I'm just doing a dry run, I don't feel like bricking my phone. I'm stuck on step "8." of the link you sent.