Database Develop

My Huawei P9 is stuck in bootloop i think?

Hi, i have tried to remove my root and unlocked bootloader as I didnt think they were correctly installed in the first place. Also I wanted to install a new oem update that it keep reminding me of in the background. So now after doing alot of things found in forums and youtube I have come to an end point were the phone just comes to the bootscreen, "your devise has been unlocked and cant be trusted." from here it is just stuck with the "your devise is now booting..." then nothing happens so I realy need help now, otherwise I will have to buy a new phone within the next days.. I cant still get into the twrp and format/wipe data etc, so is it something in here I need to fix then?
Anyone that can please help me out a bit?
Regards Kristoffer

I'm having the same issue. I am unable to flash a custom rom or an official rom. One issue I am having is that I can not relock the bootloader as I get an command not allowed. Please can someone help with this issue.
Thanks
Sent from my SM-G928F using Tapatalk

I have the same issue try to flash stock ROM 182 and latter or directly 132, is important to flash 132 BCS is the only really complete rom

Luigi Ra said:
I have the same issue try to flash stock ROM 182 and latter or directly 132, is important to flash 132 BCS is the only really complete rom
Click to expand...
Click to collapse
But I cant get into the twrp anymore, only the fastboot and recue mode and the huawei erecovery mode, and in this the wifi just gives me failed to download the package or something like that.... ://

I managed to get in recovery by running the oem unlock. The problem I have is that I am unable to lock the bootloader again.
I really want to get the phone working again. I don't want to have to send the device to a Huawei Service Centre since the bootloader has been unlocked.
I really hope someone can help us all get the device back to stock firmware.
Thanks

How did you get to the recovery mode? I cant get to the twrp anymore, i think i did something wrong and wiped data or formated it so now i can only se bootup screen, or huawei logo or get to fastboot and rescue mode. There it says phone unlocked and frp (or something) in green letters lock....? And also the huawei erecovery which i cant do anything in...

I run fastboot oem unlock and flashed twrp using fastboot.
I have managed to flash update.app, Default_hw.app, Default_normal.app and Default_eu.app using an app called DC Phoenix, but now when the phone boots it goes in to eRecovery and the touchscreen doesn't work. Even when I flash twrp again the touchscreen still doesn't work.
Please can someone advise what to do to get the touchscreen and the other phone back to normal.
Thanks

Were i find a link for step by step rooting my huawei p9 lite. I have company from amateurs pretty good ones. So i cant make mistakes. Thnx for the help...rock the world wild and free whopppaaa

P9 Bricked, Bootloader Locked. No TWRP Installed. FML (Send Help)

Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.

kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.

ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
I think there is not solution for this problem. We have to wait. (I have the same problem but in Al00 running Al19 rom)

How do you check for FRP lock on a Huawei phone just curious.

ChaseRxx said:
Hi, I have problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program by hajuuk https://forum.xda-developers.com/p9-...dater-t3435878 I used several firmwares inside the L09 option but in the middle of the installation it gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything at the momento because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Click to expand...
Click to collapse
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you

kyle_2103 said:
Okay to unlock the bootloader, go into fastboot and plug in the USB to your computer, then by either using SRK tool or adb you need to flash this command: fastboot oem unlock (insert bootloader code) *don't put brackets* if you are unaware of your bootloader code then I cannot help you, however if you do know it, then once you unlocked the bootloader flash system.img and stuff to see if that works for you
Click to expand...
Click to collapse
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.

ChaseRxx said:
Already tried this, I have the unlocking password but can't unlock BL through fastboot oem unlock (code) because the OEM Unlock is disabled.
Click to expand...
Click to collapse
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?

kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
I've tried some command in fastboot mode but there's always an error: Remote: command not allowed.
I can't do anything with fastboot mode

1. Try to force update with Power Button + Min Vol Button + Max Vol Button, liked you said this isn't working try to do the button combination with the phone connect it to the PC; in my case some times dload din't works after I connected the phone to the computer.
2. Other thing, something happend if you turn of the phone and leave Max Vol Button pressed, you should be entering to eRecovery.
3. Remember that sometimes enter in eRecovery mode requires to the phone be turn off otherwise you can't access to Recovery. So if this is the case follow bullet #2 and them #1.
PD: OFC I'm assuming you already have the dload folder with an compatible version of stock ROM on your SDCARD. If you don't have any version tries this one: https://forum.xda-developers.com/p9...dload-file-p9-eva-l09-b136-t3382818?nocache=1
Hope I helped you, I already bricked twice my P9 corrupting System Table Partitions.
Jeremy Molina.
---------- Post added at 10:38 AM ---------- Previous post was at 10:36 AM ----------
kyle_2103 said:
That's weird, OEM unlcok was also switched off in developer options for me, yet this still worked, can you tell me exactly what the error code says?
Click to expand...
Click to collapse
If you did the change of Unlock OEM before the bricked in an previous authorized computer you will still have rights for, otherwise new Android Security features is going to rejected the request.

Exacly

Dload/ no network
ChaseRxx said:
Exacly
Click to expand...
Click to collapse
Hi guys! Im new sorry if posted in wrong place/topic, I did dload method as here https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818 to debrand my L09 Vodafone to stock software and now I end up in EVA-C900B136 and my sim card/network is not working anymmore I had download the software package is in the above post and did force flash.
Many thanks for help!!!

kyle_2103 said:
Think I did the title pretty well, I can only access fastboot (Before you say anything I've already tried this guide:http://forum.xda-developers.com/hua...ow-to-unbrick-huawei-p8-failed-t3260704/page1) all it gets me is the screen to light up (black) that's it. At this point I have no clue how to bring it back, any useful tips or ideas would always be appreciated. Thanks.
EDIT: It would be helpful if anyone knew a way to unlock the bootloader through fastboot
EDIT: nvm unlocked the bootloader through adb
EDIT:Installed TWRP through FASTBOOT
EDIT: Had the future rom downloaded, installed through SD card. DEVICE BOOTS.
EDIT: Tried dload method, went back to square 1 (Device would only backlit screen on boot, bootloader locked) Repeated steps and used the Huawei P9 Updater 2.0 by Hajuuk (Godbless) IT WORKS. Currently on C185B170 will update to B180 and from there to Android N. IF anyone has a similar problem feel free to ask.
Click to expand...
Click to collapse
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.

dondrog said:
How did you unlock the bootloader through adb ? I'm in the same position as you put I have a P9lite.
Click to expand...
Click to collapse
fastboot oem unlock (followed by bootloader code)

kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello gays i install nougat 7
install with TWRP after install my phone is no keybord no all problems and i can`t active oem waht i do all command
remote not allowed coomand and i try to install all veriosn but still problem please help me
i install
EVA-L19C432B322-update
and my phone 6369C-EVA L19
my mistake please help me
i try to swoftware sim but swoftware failed
--
incompatibility with current version please download the correct update package
i upload vedio on youtube see please https://www.youtube.com/watch?v=V2yH...ature=youtu.be
sry for my bad engilsh

Any help would be greatly appreciated
I have a P9 L09, i have unlocked the bootloader, flashed TWRP recovery, and started flashing some roms. I have succesfully flashed a cyanogenmod, and it booted properly, but when it started it asked me for a password which i did not know, so i google searched and found out that it is a common issue and i need to wipe data from recovery. I tryed that but it did not work it says failed, and nothing works in the wipe advanced section, beside system. And also in the custom recovery it says that the internal storage has 0MB ! I was able to put other custom roms on the SDcard and flash them, they booted but every single one asks for the password.. I then tryed to install stock rom with the dload method, but it crashes and 40% , and i tryied the System Recovery option in HiSuite and it says it is not compatible with my device. Any help would be greatly appreciated! Thank you!

kyle_2103 said:
fastboot oem unlock (followed by bootloader code)
Click to expand...
Click to collapse
Hello. I have the same problem. I have my unlock code but in fastboot, adb command says it failed. Sorry for bad english. What can i do?
FAILED: REMOTE COMMAND NOT ALLOWED FINISHED.

Same problem on my honor &x locked bootloader and bricked. unlocking the oem like you said above does not work

[help] frp lock in fastboot

hi everybody,
I need help from a big expert because I have a big problem with my P10...
ok for starter I know where is my mistake I forget to enable oem security in dev option
of course it's not my only mistake in twrp I do a advenced wipe and I wipe system sd etc...
So now my phone don't boot, twrp goe's when I flash another updape.zip with extarnal sd card and I can't flash anything with fastboot because frp it's lock...
my previous version it's l09c45b101 and I don't find full update.zip of this version just ota...
Some one can help me please

Lykeul said:
hi everybody,
I need help from a big expert because I have a big problem with my P10...
ok for starter I know where is my mistake I forget to enable oem security in dev option
of course it's not my only mistake in twrp I do a advenced wipe and I wipe system sd etc...
So now my phone don't boot, twrp goe's when I flash another updape.zip with extarnal sd card and I can't flash anything with fastboot because frp it's lock...
my previous version it's l09c45b101 and I don't find full update.zip of this version just ota...
Some one can help me please
Click to expand...
Click to collapse
It's not big problem just boot loader lock and relock again the phone is factory reset. Ok

M.KK said:
It's not big problem just boot loader lock and relock again the phone is factory reset. Ok
Click to expand...
Click to collapse
Really ? I try this know
But how relock him when frp it's lock ? Fastboot don't work
Edit: so like I say fastboot don't work ....

i had the same problem only option was to use dc phoenix so you have to pay but maybe try red lotus but it think it wont work because you dont have the option to flash stock recovery.but maybe we should give you a twrp backup of system and boot then you could boot again

crucky said:
i had the same problem only option was to use dc phoenix so you have to pay but maybe try red lotus but it think it wont work because you dont have the option to flash stock recovery.but maybe we should give you a twrp backup of system and boot then you could boot again
Click to expand...
Click to collapse
I paid 15€ on DC Phoenix for flash any update.app but don't boot.
I paid 15€ on DC unlocker for erase frp but don't work.
Unlock and relock don't work
I can't use a backup or twrp because now I have stock recovery.
What can I do ???
:crying:

check the thread to rebrand should work for you

this worked for me:
- relock the bootloader via ADB
- in Developer Option, Enable OEM unlock
- unlock the bootloader again via ADB

His P10 don't boot...

Hello, Try This Methode : https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108

Hi did you fix your phone?

im having the same issue.
PhysX said:
this worked for me:
- relock the bootloader via ADB
- in Developer Option, Enable OEM unlock
- unlock the bootloader again via ADB
Click to expand...
Click to collapse
hello!
when you say "relock the bootloader via ADB you mean:
adb reboot-bootloader THEN fastboot oem lock (and the code)?
thanks.
EDIT: i was using the wrong command, it is fastboot oem relock and the code... sorry

HWOTA working and solved your problem.
just yesterday I made mine. the bootloader was open but the frp was closed.
the HWOTA has solved it nicely. now vtr-L29C432B185 firmware is up.
Unfortunately, this disadvantage is the low level format after the bootloader has been re-opened as the firmware closes.

Lykeul said:
hi everybody,
I need help from a big expert because I have a big problem with my P10...
ok for starter I know where is my mistake I forget to enable oem security in dev option
of course it's not my only mistake in twrp I do a advenced wipe and I wipe system sd etc...
So now my phone don't boot, twrp goe's when I flash another updape.zip with extarnal sd card and I can't flash anything with fastboot because frp it's lock...
my previous version it's l09c45b101 and I don't find full update.zip of this version just ota...
Some one can help me please
Click to expand...
Click to collapse
Same problem.. and you can bug it to get locked, but won't help... my problem is that I got EMUI 8 with oreo, but also B172 rom flashed at the same time. So if I unlock it but FRP is lock, the phone won't boot to install because of rom.

I have the same issue, but i can´t turn on my phone to unlock OEM.
What can i do?

I also have same problem. I got frp unlock key from Huawey support, but it doesent help to unlock frp. Without it i cant unlock bootloader. Try a lot of things, nothing help. Tommorow i will go go service...
I got answer that motherboard is demage, and repair cost more than new phone....

Tommasavas said:
I also have same problem. I got frp unlock key from Huawey support, but it doesent help to unlock frp. Without it i cant unlock bootloader. Sooo i'm in deep ass with that. Try a lot of things, nothing help. Tommorow i will go go service...
I got answer that motherboard is demage, and repair cost more than new phone....
Click to expand...
Click to collapse
u can have frp removed at https://www.gsmzambia.com

Tommasavas said:
I also have same problem. I got frp unlock key from Huawey support, but it doesent help to unlock frp. Without it i cant unlock bootloader. Try a lot of things, nothing help. Tommorow i will go go service...
I got answer that motherboard is demage, and repair cost more than new phone....
Click to expand...
Click to collapse
Sooo guys, if you have HUAWEI P10 (my phone is VTR-L29), which have FRP LOCK, BOOTLOADER LOECKEd and you HAVE access to ERECOVERY, you can safe you time and money to do this: send me a message, because i can't put outside link.... (you need Frimware Finder, Wifi router, and eRecovery)
I did everything like in this thread after visited phone service, there they told what my phone totaly dad...
Sooo, do it and BE HAPPY.

you managed to fix your cell phone?
---------- Post added at 06:46 AM ---------- Previous post was at 06:15 AM ----------
Tommasavas said:
Sooo guys, if you have HUAWEI P10 (my phone is VTR-L29), which have FRP LOCK, BOOTLOADER LOECKEd and you HAVE access to ERECOVERY, you can safe you time and money to do this: send me a message, because i can't put outside link.... (you need Frimware Finder, Wifi router, and eRecovery)
I did everything like in this thread after visited phone service, there they told what my phone totaly dad...
Sooo, do it and BE HAPPY.
Click to expand...
Click to collapse
you managed to fix your cell phone?

Did you find any solution?

I have a Huawei P10 plus (VKY-L29). Tried all methods to bypass FRP to no success.
- Talkback (V7.3 - Therefore no luck)
- Emergency dialler (*#*#6130#*#*) not picking up as well as other dial codes in emergency dial
- Erecovery (cannot find any recovery files)
- Fastboot mode (phone restarts to Welcome screen soonest booted)
- Wifi (Connect to first Wifi and then forget this network and connect again to 2nd Wifi entering some manual details on the host/proxy and then connect again to force the phone to come up with the error message in order to access help) no luck
Am I missing something? has anyone had success already regarding the Huawei P10 Plus FRP bypass????

i dont what happened my mobile .it will show like this . command not allowed

Fastboot flash boot boot.img
Fastboot flash recovery recovery.img .....etc
Nothing is working .if u know anyone pls help me

we need open bootlodaer

Hi guys! My P10 Lite is booting only in TWRP and Fastboot but Bootloader and FRP are locked!! O_O
How can I exit from this situation? Maybe without wasting money in DC-Phoenix?
Unfortunally I don't remember my Product ID phone needed for the unlock
EDIT: modding on OPO is easier

Thanks for replying
I already open bootloader
But this msg shown.i don't know .what happened

Bricked Honor 5c

Hi I have a problem with my honor 5c so I deleted everything from the phone because I wanted to install custom rom but that didnt worked out and now I dont have system on it and twrp recovery was also deleted I unlocked bootloader but every command i type in fastboot is not working even one for oem status but if I type fastboot devices it shows my device and if I go to huawei erecovery and try to recover it it says getting package info failed and when battery discharge and I put it on charger it says
error mode
attention!
Please update system again.
Error!
Func NO: 10(boot image
Error NO: 2(load image)
I am really pissed off and I dont know what to do someone HELP ME PLEASE.:crying:

Simply u can fix
Preview:
Today I faced this issue,and successfully solved,
Shutdown mobile ,then connect to PC and quickly press volume down button automatically goes to bootloader mode , manually flash system,cust,recovery and boot img
---------- Post added at 01:30 PM ---------- Previous post was at 01:26 PM ----------
Then use Dload method u can fix this issue,
Today I post some posts according to this issue on Facebook,
Honor 5c group india

But as I wrote if I go to fastboot/bootloader I cant type any command on every command it says "command not allowed" even the one for oem status and I cant turn on usb debbuging or oem unlock because I dont have os.

Hey @leoleo333, I did exactly the same thing that you did and had exactly the same problem as a result. I considered myself fairly knowledgeable about Android and Huawei/honor mobiles... I tried everything you can think of and spent months trawling the internet for a solution and was unable to fix it. I posted here on XDA and even the most knowledgeable members were unable to help. You should do a search of my XDA posts relating to this.
That said,I am using my honor 5C right now!:laugh: I didn't realise that my warranty was 24 months,I thought it was 12 months. Hence why I spent so many months trying to fix the problem myself. By chance I found out I still had warranty and sent it to the repair centre. It was so easy and straight forward and in a matter of days they had fixed and returned my beloved mobile. I even had a slight defect on the screen as a result of falling over and they even repaired that free of charge!
All I can say is that I hope and pray you have warranty :fingers-crossed: or you can kiss your mobile goodbye. Sorry. Please do let me know if you fix it yourself though, I'd be really interested to know where I went wrong. Thx.

leoleo333 said:
But as I wrote if I go to fastboot/bootloader I cant type any command on every command it says "command not allowed" even the one for oem status and I cant turn on usb debbuging or oem unlock because I dont have os.
Click to expand...
Click to collapse
Is opend erecovery mode
I used Huawei multi tool,
For installing stock recovery,
If you success to flashing stock recovery
Then use dload method

shankarjdhv125 said:
Is opend erecovery mode
I used Huawei multi tool,
For installing stock recovery,
If you success to flashing stock recovery
Then use dload method
Click to expand...
Click to collapse
He has already explained that....!
It doesnt matter if you use multi tool or manual commands...You cant flash stock recovery because every fastboot command comes back 'remote command not allowed' and this is because the os will not boot so you cant enable oem unlock and usb debugging in order to unlock bootloader and have full use of adb/fastboot.
The dload method will install the update.app, it will even go to 100% and say success but it will NOT boot the OS. It will stay stuck on boot animation until the battery dies. Search my posts here on XDA (stuck on boot logo).
I think it has to do with the partitions or the filesystem...I'm afraid i cant help you with that @leoleo333

@leoleo333 , you mention that your bootloader is unlocked...I think you should double check that. if it was unlocked you would be able to use fastboot commands and flash whatever you want. I have read many posts on XDA where members report that their bootloader is unlocked and the device says as much but in fact that is not the case! Let me know how things go. Good Luck.

I managed to fix it couple of days ago with dload method, it actually worked for me i would try it before but i did not had micro sd card

Nice, Im really glad that the dload method was all it took to fix it. Take it easy now.

Bro try this ,added screenshots ,I fixed same issue
iantechie1979 said:
He has already explained that....!
It doesnt matter if you use multi tool or manual commands...You cant flash stock recovery because every fastboot command comes back 'remote command not allowed' and this is because the os will not boot so you cant enable oem unlock and usb debugging in order to unlock bootloader and have full use of adb/fastboot.
The dload method will install the update.app, it will even go to 100% and say success but it will NOT boot the OS. It will stay stuck on boot animation until the battery dies. Search my posts here on XDA (stuck on boot logo).
I think it has to do with the partitions or the filesystem...I'm afraid i cant help you with that @leoleo333
Click to expand...
Click to collapse
Same issue fixed by me

Software install failed but successfully booted