Database Develop

Help me! m7 bricked..

Hello! Thank u in advance of helping me.
this is my phone info in HBOOT:
Tampered
Unlocked
m7_ul pvt ship s-off rh
cid-cws__001
hboot-1.54.0000
radio-4a.17.3250.14
opendsp-v31.120.274.0617
os-
emmc-boot 2048mb
________________________
i have touch recovery installed, but nothing on my phone storage to flash.
after get s-off my phone wont start. htc logo appears and then goes black screen.
please help me , because im loosing my mind on that...
thank u a lot!!!

Try here:
http://forum.xda-developers.com/showthread.php?t=2318497
Sent from my HTC One using xda premium

Potapson said:
Try here:
http://forum.xda-developers.com/showthread.php?t=2318497
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
tried it. gives me error even when type "adb devices" it shows me that its attached...

Can you access bootloader ?
Btw it's not bricked if you can get into bootloader.
Sent from my HTC One using XDA Premium 4 mobile app

Shan89 said:
Can you access bootloader ?
Btw it's not bricked if you can get into bootloader.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i can get it ...

Just flash your RUU rom.zip and you're all set.
This might help: http://forum.xda-developers.com/showthread.php?t=2497614

electronical said:
Just flash your RUU rom.zip and you're all set.
This might help: http://forum.xda-developers.com/showthread.php?t=2497614
Click to expand...
Click to collapse
can u give it whats it? i really dont want to mess up the things and i need my phone .... :I

i go to cid: htc_001. tell me what RUU i need please

kokobaliev said:
i go to cid: htc_001. tell me what RUU i need please
Click to expand...
Click to collapse
You need to know your MID as well as your CID. Watch out for the M7 UL or M7 U in the filename (make the correct choice): http://www.htc1guru.com/downloads/ruu-file-downloads/
If you're still having difficulty to find/choose your RUU, just follow step 1 from the guide (link in my previous reply) and post it here, but remove your serial and imei.

electronical said:
You need to know your MID as well as your CID. Watch out for the M7 UL or M7 U in the filename (make the correct choice): http://www.htc1guru.com/downloads/ruu-file-downloads/
If you're having difficulty to find/choose your RUU, just follow step 1 from the guide (link in my previous reply) and post it here, but remove your serial and imei.
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4166mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

kokobaliev said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4166mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
This RUU should work fine for you. :cyclops:
http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
Just download and run it. Keep it safe if you ever need to return to 100% stock again. Your S-OFF and unlocked bootloader will stay unchanged and you will be able to receive OTAs.
An alternate solution would have been to adb push a stock/custom ROM to your device and then flash it in custom recovery, but maybe the RUU method is easier for you.

electronical said:
This RUU should work fine for you. :cyclops:
http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
Just download and run it. Keep it safe if you ever need to return to 100% stock again. Your S-OFF and unlocked bootloader will stay unchanged and you will be able to receive OTAs.
An alternate solution would have been to adb push a stock/custom ROM to your device and then flash it in custom recovery, but maybe the RUU method is easier for you.
Click to expand...
Click to collapse
THANK U MAN! i managed to turn on my phone with this RUU but now i have another problem.
the ruu was android version 4.1 and i managed to update it to 4.2.2 + the little fix (30mb) and now it shows me that my device is up to date and theres no update for it.
what to do to update to 4.3?

kokobaliev said:
THANK U MAN! i managed to turn on my phone with this RUU but now i have another problem.
the ruu was android version 4.1 and i managed to update it to 4.2.2 + the little fix (30mb) and now it shows me that my device is up to date and theres no update for it.
what to do to update to 4.3?
Click to expand...
Click to collapse
Glat that it worked out for ya , you should have system version with 401 in it , it's interational EU base , you should have update on your phone , i've got it when i went back to stock to apply OTA. if it doesn't work use THIS http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-1-zip/
It's stock HTC One rom , the one you need , that's the one i used and applied ota i'm HTC_032 cid , it's pretty much same like yours since the 401 base supports more cids like yours HTC_001 , 401 rom has these cids :
HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
Click to expand...
Click to collapse
you need to flash recovery , then flash this , it has aroma options , you'll get prompted to flash STOCK RADIO and STOCK RECOVERY , check those 2 and let it flash , after that you'll get few minor updates then the big one 675 mb sense 5.5 and 4.3 , this worked for me should work for you as well.

Shan89 said:
Glat that it worked out for ya , you should have system version with 401 in it , it's interational EU base , you should have update on your phone , i've got it when i went back to stock to apply OTA. if it doesn't work use THIS http://www.htc1guru.com/dld/guru_reset_m7_2-24-401-1-zip/
It's stock HTC One rom , the one you need , that's the one i used and applied ota i'm HTC_032 cid , it's pretty much same like yours since the 401 base supports more cids like yours HTC_001 , 401 rom has these cids :
you need to flash recovery , then flash this , it has aroma options , you'll get prompted to flash STOCK RADIO and STOCK RECOVERY , check those 2 and let it flash , after that you'll get few minor updates then the big one 675 mb sense 5.5 and 4.3 , this worked for me should work for you as well.
Click to expand...
Click to collapse
Тhank u for your quick response! I have 1 last question. Now my phone is unrooted. 1st i need to root it to flash recovery or i can go flash recovery via fastboot without rooting it?
edit: the other question is if i want to flash Android Revolution 31ver. can i do it right now ? in this phone codition?

kokobaliev said:
Тhank u for your quick response! I have 1 last question. Now my phone is unrooted. 1st i need to root it to flash recovery or i can go flash recovery via fastboot without rooting it?
edit: the other question is if i want to flash Android Revolution 31ver. can i do it right now ? in this phone codition?
Click to expand...
Click to collapse
1. At 1st question you need unlocked bootloader , if you have s-off you can do it without need of htc ( also no need to lock bootloader when applying ota ) then you flash recovery via fastboot after that go to recovery and flash the Rom I gave you link for and update to latest 3.62 with new hboot and radio. ( remember to select when flashing the Rom above " flash stock radio / recovery " )
After applying ota you can flash recovery of your choice and flash any Rom. My suggestion is do what I wrote here mainly so you get latest hboot / radio. Then make a nandroid backup of stock Rom and keep it for next ota.
2nd question :
Yes you can flash any Rom on any hboot version we have right now. But it's adviced to apply latest hboot / radio for better compatibility.
@ rooting , root is not needed for flashing roms all you need is unlocked bootloader for recovery , this isn't Sony :sly:
Sent from my HTC One using XDA Premium 4 mobile app

Shan89 said:
1. At 1st question you need unlocked bootloader , if you have s-off you can do it without need of htc ( also no need to lock bootloader when applying ota ) then you flash recovery via fastboot after that go to recovery and flash the Rom I gave you link for and update to latest 3.62 with new hboot and radio. ( remember to select when flashing the Rom above " flash stock radio / recovery " )
After applying ota you can flash recovery of your choice and flash any Rom. My suggestion is do what I wrote here mainly so you get latest hboot / radio. Then make a nandroid backup of stock Rom and keep it for next ota.
2nd question :
Yes you can flash any Rom on any hboot version we have right now. But it's adviced to apply latest hboot / radio for better compatibility.
@ rooting , root is not needed for flashing roms all you need is unlocked bootloader for recovery , this isn't Sony :sly:
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
thanks a lot man! im already on Android Revolution 31. thank u for helping me!

[Q] HTC One bricked after 4.4 update

Hi All,
I have been searching for a few days now on this issue but due to my noobness has so far been unable to fix my problem.
I currently have a HTC One (802d dual-sim) S-ON and RELOCKED. I purchased the phone in Indonesia and have been using it fine on stock 4.2.2. I just came back to Australia for a visit and saw I could finally upgrade to kitkat (was never available in Indonesia) so I went ahead to download and install through settings/software option. It appeared to download fine and was going through the install process but I came back later to check on it and it was now stuck in a reboot loop where it just displays the HTC logo for a few seconds and reboots.
I have got into the bootloader and have tried both a recovery and factory reset, neither of which seem to have helped as the phone just goes back into the reboot loop. I have also tried erasing the cache which also had no effect.
At this stage I wanted to just try and go back to 4.2.2 stock so was going to follow this guide: htc-one.wonderhowto.com/how-to/return-your-rooted-unlocked-htc-one-back-factory-settings-for-warranty-repairs-0149204/ but am now stuck at trying to find the correct RUU.
So I guess my question to all you out there is what can I do to get my phone working again, noting I am totally new to loading ROMs and other such things (I have only been learning most of this as I have been trying to troubleshoot).
Any help or advice anyone can give would be greatly appreciated.
Below is a list of my getvars in case it helps
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.49.0000
(bootloader) version-baseband: 1.01.32.0917
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.22.707.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HC3AZMPXXXXX
(bootloader) imei: XXXXXXXXXXXX
(bootloader) meid: XXXXXXXXXXXX
(bootloader) product: m7cdwg
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0751000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4095mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-f6d46eca
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.049s
And my version main
Code:
version-main: 4.22.707.3
finished. total time: 0.000s

No ideas from anyone?

_majestic_ said:
No ideas from anyone?
Click to expand...
Click to collapse
so you took an OTA upgrade from your carrier or did you manually flash something?

http://forum.xda-developers.com/showthread.php?t=2617159

cr1960 said:
so you took an OTA upgrade from your carrier or did you manually flash something?
Click to expand...
Click to collapse
OTA via wireless.
My carrier is a prepaid carrier from Indonesia but while I am on holiday in Australia I used a wifi connection to get the kitkat update.
I already had a look at the collection thread as well but my CID does not match the India ROMs (038 vs 044) so not I assumed they would not work?
Would it be easier just to use a custom ROM?

_majestic_ said:
OTA via wireless.
My carrier is a prepaid carrier from Indonesia but while I am on holiday in Australia I used a wifi connection to get the kitkat update.
I already had a look at the collection thread as well but my CID does not match the India ROMs (038 vs 044) so not I assumed they would not work?
Would it be easier just to use a custom ROM?
Click to expand...
Click to collapse
you would need to unlock bootloader and install custom recovery....

oksagi said:
http://forum.xda-developers.com/showthread.php?t=2617159
Click to expand...
Click to collapse
Update: If you have already bricked your 802d India phone, flash the FIRMWARE_M7C_DWG_JB​_50_S1_hTC_Asia_India_2.37.720 .1.zip file and then restore M7DWG_CWM_Nandroid_Backup_CID_HTC__038_2.37.720.1. zip (thanks @sankar24) using CWM, you will need to disable md5 check in CWM settings.
2.2 HTC One 802d (x.xx.720.x)
OTA updates (for Android 4.2.2):
OTA_M7C_DWG_JB_50_S1_hTC_Asia_India_2.37.720.1-2.23.720.2_release_337572.zip - 316.63 MB
Firmware (for Android 4.2.2):
FIRMWARE_M7C_DWG_JB​_50_S1_hTC_Asia_India_2.37.720 .1.zip - 23.42 MB
CWM Nandroid Backup (Android 4.2.2):
M7DWG_CWM_Nandroid_Backup_CID_HTC__038_2.37.720.1. zip - 998.74 MB
OTA updates (for Android 4.4.2):
OTA_M7C_DWG_K44_SENSE55_MR_hTC_Asia_India_4.22.720 .4-2.37.720.1_release_35360448.zip - 834.58 MB
MID & CID:
modelid: PN0751000
cidnum: HTC__038
Click to expand...
Click to collapse
So you need to download this FW Firmware (for Android 4.2.2): http://d-h.st/qOW
and then you need to restore NAND BACKUP CWM Nandroid Backup (Android 4.2.2): http://d-h.st/gYC
This is for:
MID & CID:
modelid: PN0751000
cidnum: HTC__038

Thanks, I will give this a try, still not sure if it will be an issue that my CID is HTC_044 but will get back with how I go.
Thanks again for the help!

_majestic_ said:
Thanks, I will give this a try, still not sure if it will be an issue that my CID is HTC_044 but will get back with how I go.
Thanks again for the help!
Click to expand...
Click to collapse
In case you get cid check fail or something then change cid to HTC__038. If need be you can always change back.

oksagi said:
Update: If you have already bricked your 802d India phone, flash the FIRMWARE_M7C_DWG_JB​_50_S1_hTC_Asia_India_2.37.720 .1.zip file and then restore M7DWG_CWM_Nandroid_Backup_CID_HTC__038_2.37.720.1. zip (thanks @sankar24) using CWM, you will need to disable md5 check in CWM settings.
So you need to download this FW Firmware (for Android 4.2.2): http://d-h.st/qOW
and then you need to restore NAND BACKUP CWM Nandroid Backup (Android 4.2.2): http://d-h.st/gYC
This is for:
MID & CID:
modelid: PN0751000
cidnum: HTC__038
Click to expand...
Click to collapse
_majestic_ said:
Thanks, I will give this a try, still not sure if it will be an issue that my CID is HTC_044 but will get back with how I go.
Thanks again for the help!
Click to expand...
Click to collapse
sankar24 said:
In case you get cid check fail or something then change cid to HTC__038. If need be you can always change back.
Click to expand...
Click to collapse
Question: how is he going to achieve all this, while being S-ON?

nkk71 said:
Question: how is he going to achieve all this, while being S-ON?
Click to expand...
Click to collapse
Well as an update I have my phone working again although I have not tested everything yet.
So I tried flashing the firmware as suggested but that would not work.
I then flashed CWM on the recovery partition although it took me a while to find a version that would work, it appears the latest versions of CWM and TWRP won't run on my phone for some reason, just goes to a black screen when you hit recover from the bootloader.
After finding a version of CWM on these forums that worked I then did a restore from the Nandroid backup posted here and that has seemed to work. Also once the backup/restore completed, I went to settings/info/software updates and it said there was an update available but once downloading it said my system has been modified so it wont install it. The bootloader also says **tampered** on it now.
So now that I was stuck with an order version ROM and already set to **tampered** I thought I would try a custom ROM so I could keep up with updates so I was looking at CyanogenMod but it appears once again my phone is not supported and it seems most ROMs do not have support either, really struggling with this dual SIM HTC One
So anyway just thought I would let you know my progress and a big thanks for the assistance, also if anyone knows any good custom ROMs I could try that would be great.

_majestic_ said:
Well as an update I have my phone working again although I have not tested everything yet.
So I tried flashing the firmware as suggested but that would not work.
I then flashed CWM on the recovery partition although it took me a while to find a version that would work, it appears the latest versions of CWM and TWRP won't run on my phone for some reason, just goes to a black screen when you hit recover from the bootloader.
After finding a version of CWM on these forums that worked I then did a restore from the Nandroid backup posted here and that has seemed to work. Also once the backup/restore completed, I went to settings/info/software updates and it said there was an update available but once downloading it said my system has been modified so it wont install it. The bootloader also says **tampered** on it now.
So now that I was stuck with an order version ROM and already set to **tampered** I thought I would try a custom ROM so I could keep up with updates so I was looking at CyanogenMod but it appears once again my phone is not supported and it seems most ROMs do not have support either, really struggling with this dual SIM HTC One
So anyway just thought I would let you know my progress and a big thanks for the assistance, also if anyone knows any good custom ROMs I could try that would be great.
Click to expand...
Click to collapse
So now you need to get S-OFF.
Try this method
http://forum.xda-developers.com/showthread.php?t=2632351

I tell u this method will not work in indian HTC one m7
oksagi said:
So now you need to get S-OFF.
Try this method
http://forum.xda-developers.com/showthread.php?t=2632351
Click to expand...
Click to collapse
If u have HTC ONE 802d then u must try rumrunner_HTC_0.5.0 as this work for me to made s-off

can u plz show how u did?? coz i m on a sort of same situation.
C:\ADB>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.49.0000
(bootloader) version-baseband: 1.01.32.0423
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.17.720.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7cdwg
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0751000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 3753mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
DEVICE IS S - ON
---------- Post added at 08:45 AM ---------- Previous post was at 08:40 AM ----------
oksagi said:
Update: If you have already bricked your 802d India phone, flash the FIRMWARE_M7C_DWG_JB​_50_S1_hTC_Asia_India_2.37.720 .1.zip file and then restore M7DWG_CWM_Nandroid_Backup_CID_HTC__038_2.37.720.1. zip (thanks @sankar24) using CWM, you will need to disable md5 check in CWM settings.
So you need to download this FW Firmware (for Android 4.2.2): http://d-h.st/qOW
and then you need to restore NAND BACKUP CWM Nandroid Backup (Android 4.2.2): http://d-h.st/gYC
This is for:
MID & CID:
modelid: PN0751000
cidnum: HTC__038
Click to expand...
Click to collapse
How to flash this?? I m on stock recovery with s - on
So you need to download this FW Firmware (for Android 4.2.2): http://d-h.st/qOW
and then you need to restore NAND BACKUP CWM Nandroid Backup (Android 4.2.2): http://d-h.st/gYC
This is for:
MID & CID:
modelid: PN0751000
cidnum: HTC__038[/QUOTE]

brick after update via fastboot...
Hello , my htc 802D x.xx.720.x in this infinite loop , can someone help me?
I'm a newbie...

So confused - OTA Updates & Rooted/Modified M7 - please help!

Hi all,
My girlfriend has a HTC One M7, currentley Rooted with an Unlocked bootloader, Bulletproof Kernel, CWM Recovery, S-On (can't get S-OFF no matter what I try) and running the stock 4.4.2 Sense ROM that came with the phone.
She wants to install an OTA update, obviously this won't work with the phone in it's current state. I've got experience with all of this with my Note II, but the M7 is just a whole different can of worms.
What I've tried:
Getting S-OFF (no luck whatsoever with any tools)
Flashing stock recovery and kernel
Flashing stock recovery and kernel and applying the OTA manually via recovery
I've read everything on here and nothing seems to go in. She just wants to be able to install OTA updates, even if it means unrooting her phone permanently as this will happen each time there is an OTA update.
Someone, please guide me in the right direction! Step by step maybe?
Keep in mind there is no way I can't get S-OFF.
Huge thanks to anyone that can help. I'd be eternally in your debt!!

SmokinWaffle said:
My girlfriend has a HTC One M7, currentley Rooted with an Unlocked bootloader, Bulletproof Kernel, CWM Recovery, S-On (can't get S-OFF no matter what I try) and running the stock 4.4.2 Sense ROM that came with the phone.
She wants to install an OTA update, obviously this won't work with the phone in it's current state. I've got experience with all of this with my Note II, but the M7 is just a whole different can of worms.
Click to expand...
Click to collapse
I suppose the phone is trying to apply to ota update and then show a red triangle with an exclamation mark inside?
What I've tried:
Getting S-OFF (no luck whatsoever with any tools) Any error message when trying to S-OFF? You must use the correct tool for your hboot version (probably firewater) + combination of the correct rom + kernel
Flashing stock recovery and kernel --> You must have stock recovery for ota, ota will not install using a custom one.
Flashing stock recovery and kernel and applying the OTA manually via recovery --> appyling the ota manually from stock recovery require s-off
Click to expand...
Click to collapse
I've read everything on here and nothing seems to go in. She just wants to be able to install OTA updates, even if it means unrooting her phone permanently as this will happen each time there is an OTA update
Click to expand...
Click to collapse
.
http://forum.xda-developers.com/showpost.php?p=52894276&postcount=9
http://forum.xda-developers.com/showpost.php?p=53151895&postcount=23
Keep in mind there is no way I can't get S-OFF.
Click to expand...
Click to collapse
still not sure about this, unless you get the "whelp" message from firewater...
post the output of fastboot getvar all except the imei number and serialno

alray said:
I suppose the phone is trying to apply to ota update and then show a red triangle with an exclamation mark inside?
Click to expand...
Click to collapse
Yep!
alray said:
http://forum.xda-developers.com/showpost.php?p=52894276&postcount=9
http://forum.xda-developers.com/showpost.php?p=53151895&postcount=23
Click to expand...
Click to collapse
Interesting. I don't have the phone with me at the moment and it's late but I'll try to do the POWERUP + VOL tomorrow at some point, I'll get her to try stock recovery + kernel then do it and see what it's stopping at.
alray said:
still not sure about this, unless you get the "whelp" message from firewater...
Click to expand...
Click to collapse
Didn't get that message, just keeps going indefinetley or stops, and doesn't S-OFF. Tried Firewater, Revone, RumRunner, if there is another then I've almost certainly tried it, followed all the guides including the one that flashed Android Revolution...no idea..
alray said:
post the output of fastboot getvar all except the imei number and serialno
Click to expand...
Click to collapse
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: [I]XXXXXXXXXXXX[/I]
(bootloader) imei: [I]XXXXXXXXXXXXXXX[/I]
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3798mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Thanks for the prompt reply, really appreciate it and any help you can give.

SmokinWaffle said:
Yep!
Interesting. I don't have the phone with me at the moment and it's late but I'll try to do the POWERUP + VOL tomorrow at some point, I'll get her to try stock recovery + kernel then do it and see what it's stopping at.
Didn't get that message, just keeps going indefinetley or stops, and doesn't S-OFF. Tried Firewater, Revone, RumRunner, if there is another then I've almost certainly tried it, followed all the guides including the one that flashed Android Revolution...no idea..
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.25.3263.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: [I]XXXXXXXXXXXX[/I]
(bootloader) imei: [I]XXXXXXXXXXXXXXX[/I]
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3798mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.047s
Thanks for the prompt reply, really appreciate it and any help you can give.
Click to expand...
Click to collapse
your version-main? (rom version) Go in settings --> About --> Software info --> Rom version
maybe there is a ruu you could use to restore the phone(4.19.401.9), if it match your version
---------- Post added at 04:40 PM ---------- Previous post was at 04:35 PM ----------
you can also flash the stock 5.11.401.10 rom, recovery and firmware available on ARHD website
http://android-revolution-hd.blogspot.ca/p/android-revolution-hd-mirror-site-var.html
http://forum.xda-developers.com/showthread.php?t=2224752

alray said:
your version-main? (rom version) Go in settings --> About --> Software info --> Rom version
maybe there is a ruu you could use to restore the phone(4.19.401.9), if it match your version
---------- Post added at 04:40 PM ---------- Previous post was at 04:35 PM ----------
you can also flash the stock 5.11.401.10 rom, recovery and firmware available on ARHD website
http://android-revolution-hd.blogspot.ca/p/android-revolution-hd-mirror-site-var.html
http://forum.xda-developers.com/showthread.php?t=2224752
Click to expand...
Click to collapse
4.19.401.11
What exactly is the function of the RUU? I can't seems to get my head around it..
I'm guessing the ARHD steps are to try to get S-OFF?

SmokinWaffle said:
4.19.401.11
What exactly is the function of the RUU? I can't seems to get my head around it..
Click to expand...
Click to collapse
forget the ruu, your phone version is higher than the ruu. flashing a ruu (4.11.401.10) with a lower version than on your phone(4.11.401.11) require s-off.
I'm guessing the ARHD steps are to try to get S-OFF?
Click to expand...
Click to collapse
No, this is the latest stock rom(5.11.401.10) for your phone model (MID: PN0710000 and CID:HTC__001) including android 4.4.2 and sense 6.0
You can flash this stock odexed rom(5.11.401.10) from custom recovery, then flash the stock recovery(5.11.401.10) over the custom one and your phone will be stock and ready to take future ota update. You may also want to update firmware to 5.11.401.10

So after flashing that rom and stock recovery, ota would be ready to roll? Would the kernel matter?
What's the purpose / Difference of firmware and how is it updated? On my note II it was just choose a rom choose a kernel and off you go. This is so much more involved

SmokinWaffle said:
So after flashing that rom and stock recovery, ota would be ready to roll? Would the kernel matter?
Click to expand...
Click to collapse
stock kernel in included in the rom (boot.img) so if you don't flash any other kernel it should be fine.
What's the purpose / Difference of firmware and how is it updated? On my note II it was just choose a rom choose a kernel and off you go. This is so much more involved
Click to expand...
Click to collapse
firmware is all the low level code required for your phone hardware to works with the software (OS)
when speaking about HTC phone, firmware.zip include HBOOT(bootloader), BOOT(kernel), Recovery, Radio and some other stuff. if you want your phone to be 100% stock you need both stock rom + stock firmware to match the same version i.e 5.11.501.10
normally, the firmware is updated at the same time the rom version is updated (from an ota update) If you flash a rom, the rom will be updated but not the firmware.
Updating the firmware manually can be dangerous is you don't know what you are doing and flashing the wrong file. You can update firmware using this command from bootloader (with the correct firmware.zip package in the same folder you have adb and fastboot):
Code:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip
fastboot reboot-bootloader
also it looks like flashing a 5.x.xxx.x firmware over a 3.x.xxx.x firmware will brick your phone. from what i see, your phone should be on a 4.x.401.x version at the moment, so it theory it should be fine.

Fails on:
>>>setting permissions
set_metadata_recursive: some changes failed
E:Error in /data/media/0/one_5.11.401.10_odexed.zip
(status 7)
Tried 3 different versions of cwm. Bad rom download?
Thinking about it I just re read your above post, could it be because the firmware isn't matched? I read your 'it should be fine' as 'dont update the firmware' not 'its fine to update' which I think is what you meant...
Firmware is 4.19.401.11 however the rom is 5.11.401.10. Can't believe I overlooked this, guess firmware needs to be 5.11.401.10 for the rom to take?

SmokinWaffle said:
Tried 3 different versions of cwm. Bad rom download?
Click to expand...
Click to collapse
No you are using CWM thats the problem. always use TWRP 2.6.3.3

alray said:
No you are using CWM thats the problem. always use TWRP 2.6.3.3
Click to expand...
Click to collapse
Huh?
Is this a requirement of ARHD or....?
Just seems odd
Edit: success!! All seems to work. Thank you. She's overjoyed!!!

[Q] Old hboot on Lollipop

Hi,
I have reinstall my m7 to old ROM with Android 4.1.1 and didn't do all stages OTA updates but recover backup with Lollipop. Everything is going fine but now I have hboot 1.5.4 instead 1.61. Could it cause any problem in the future? Should I install latest hboot? (where to find it?)
I have a stock rom htc one, wwe, s-off, rooted.

At this time i don't think so except if you try modding. But when htc rolls out the new sense update maybe you will have some troubles.

VoynichJimmy said:
At this time i don't think so except if you try modding. But when htc rolls out the new sense update maybe you will have some troubles.
Click to expand...
Click to collapse
I wanna stay with a stock rom. But considering to keep system up to date. What is the solution then? Should I go to rom version down and upgrade to current android 5.02 and then recover backup? Or is there a place on the network where I can find the original stock hboot 1.61 and install it via fastboot? (I've tried, didn't found)

badzi0r said:
I wanna stay with a stock rom. But considering to keep system up to date. What is the solution then? Should I go to rom version down and upgrade to current android 5.02 and then recover backup? Or is there a place on the network where I can find the original stock hboot 1.61 and install it via fastboot? (I've tried, didn't found)
Click to expand...
Click to collapse
There is no stock hboot 1.61 yet but if you want check this: http://forum.xda-developers.com/htc-one/development/hboot-modified-hboot-1-60-7-15-401-1-t3006222
But i am still confused about your case dude !! People are trying to upgrade and you are downgrading ? Hope you know what/where you are doing ?

VoynichJimmy said:
There is no stock hboot 1.61 yet
Click to expand...
Click to collapse
Yes there is.
https://www.androidfilehost.com/?fid=95916177934533541
stock 1.61 can also be extracted from these files:
https://www.androidfilehost.com/?fid=95916177934534374
https://www.androidfilehost.com/?fid=95916177934534383
https://www.androidfilehost.com/?fid=95916177934534503
@badzi0r post the output of "fastboot getvar all" before going any further. Remove imei and serialno before posting.

VoynichJimmy said:
But i am still confused about your case dude !! People are trying to upgrade and you are downgrading Hope you know what/where you are doing
Click to expand...
Click to collapse
I'm not downgrading. As I said in my first post. After crashing my HTC I have installed all from the beginning, hboot 1.44, rom with android 4.1.1, etc... then I have made OTA update to 1 version up, and then I have restored whole system (Lollipop) from backup made by TWRP. So now I have now Lollipop with hboot 1.54 but I would prefer have the updated to 1.61.
I hope it's clear now
BTW, can anyone look at my bootloader screen and confirm that not only hboot is outdated? How about the radio, etc...?

badzi0r said:
I'm not downgrading. As I said in my first post. After crashing my HTC I have installed all from the beginning, hboot 1.44, rom with android 4.1.1, etc... then I have made OTA update to 1 version up, and then I have restored whole system (Lollipop) from backup made by TWRP. So now I have now Lollipop with hboot 1.54 but I would prefer have the updated to 1.61.
I hope it's clear now
BTW, can anyone look at my bootloader screen and confirm that not only hboot is outdated? How about the radio, etc...?
Click to expand...
Click to collapse
HTC never updates hboot by itself.
If you don't have latest firmware, then you don't have latest hboot, radio, adsp, touch driver, WiFi driver, modem files, etc....
In other words, don't just update your hboot and expect to be fully up to date.
Update your full firmware.

badzi0r said:
I have installed all from the beginning, hboot 1.44, rom with android 4.1.1, etc... then I have made OTA update to 1 version up, and then I have restored whole system (Lollipop) from backup made by TWRP
Click to expand...
Click to collapse
And why not updating all the way up to lollipop? You will not be able to take ota updates with your phone in this state. Your firmware version and software version must match. Its not only the hboot version, like said above.

alray said:
And why not updating all the way up to lollipop? You will not be able to take ota updates with your phone in this state. Your firmware version and software version must match. Its not only the hboot version, like said above.
Click to expand...
Click to collapse
I didn't have stock rom with lollipop and been to lazy to do one by one all that OTA updates, so after two I've restored the twrp backup.
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4099mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.062s
Click to expand...
Click to collapse
What you suggest now?

RUU is not working for my M7.

I have an AT&T M7 flashed with Cyanogenmod 10 that I would like to restock. I've tried the RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2, but that is not working.
I mean it starts to run and then after asking for aproval it desapears.
I also tried the RUU_M7_UL_JB_50_Cingular_US_1.26.502.12_Radio_4A.14.3250.13_10.33.1150.01_release_318450_signed_2, and this one runs but at the end it says that is not compatible with my phones firmware.
This is the phone info:
M7_UL PVT SHIP S-OFF RH
CID-CWS_001HBOOT-1. 56. 0000
RADIO-4T. 24. 3218. 09
OpenDSP-v32. 120. 274. 0909
OS-4. 18. 502. 7
eMMC-boot 2048MB
Jan 28 2014, 09: 32: 41. 0
What is the simpliest way to go back to stock?
Thanks in advance.
Getvar:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4284mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.065s

chiquito3 said:
I have an AT&T M7 flashed with Cyanogenmod 10 that I would like to restock. I've tried the RUU_M7_UL_K44_SENSE55_MR_Cingular_US_4.18.502.7_R10_Radio_4T.24.3218.09_10.26.1718.01L_release_356565_signed_2, but that is not working.
I mean it starts to run and then after asking for aproval it desapears.
I also tried the RUU_M7_UL_JB_50_Cingular_US_1.26.502.12_Radio_4A.14.3250.13_10.33.1150.01_release_318450_signed_2, and this one runs but at the end it says that is not compatible with my phones firmware.
This is the phone info:
M7_UL PVT SHIP S-OFF RH
CID-CWS_001HBOOT-1. 56. 0000
RADIO-4T. 24. 3218. 09
OpenDSP-v32. 120. 274. 0909
OS-4. 18. 502. 7
eMMC-boot 2048MB
Jan 28 2014, 09: 32: 41. 0
What is the simpliest way to go back to stock?
Thanks in advance.
Getvar:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4T.24.3218.09
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.18.502.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4284mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-c6bbb6d4
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.065s
Click to expand...
Click to collapse
you need to downgrade your hboot to 1.44 to flash 1.26.502.12

alray said:
you need to downgrade your hboot to 1.44 to flash 1.26.502.12
Click to expand...
Click to collapse
Thanks a lot for your response! Actually my real intention is not to go back to 1.26.502.12, but to go back to the latest stock available. Is just that the 4.18.502.7 RUU did not work for me.
If downgrading will solvwe my problem where do I get a copy of the 1.44 hboot for AT&T. I do not find one with the 502 identification.

chiquito3 said:
Thanks a lot for your response! Actually my real intention is not to go back to 1.26.502.12, but to go back to the latest stock available. Is just that the 4.18.502.7 RUU did not work for me.
If downgrading will solvwe my problem where do I get a copy of the 1.44 hboot for AT&T. I do not find one with the 502 identification.
Click to expand...
Click to collapse
use the 1.44 hboot from the .401 version.

chiquito3 said:
Thanks a lot for your response! Actually my real intention is not to go back to 1.26.502.12, but to go back to the latest stock available. Is just that the 4.18.502.7 RUU did not work for me.
If downgrading will solvwe my problem where do I get a copy of the 1.44 hboot for AT&T. I do not find one with the 502 identification.
Click to expand...
Click to collapse
Did you check the md5 of the 4.15.502.7 ruu you downloaded?
Also if you have HTCsync installed then uninstall it. Doesn't do any favours when using ruu's :good:

I've downloaded the file from 2 different sources and the resilt is the same.
Sent from my SM-G900T using Tapatalk

chiquito3 said:
I've downloaded the file from 2 different sources and the resilt is the same.
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Is the RUU quiting after you accept the license agreement , if so, its a windows error not an RUU error, read and do the fix below:
http://forums.androidcentral.com/htc-evo-4g-lte/363796-can-t-install-4-3-ruu-windows-7-8-1-a.html
post 18 fixed the problem for me, you need to download and install all one at a time with a reboot in-between each one, do not use windows update to update any of them.

Seanie280672 said:
Is the RUU quiting after you accept the license agreement , if so, its a windows error not an RUU error, read and do the fix below:
http://forums.androidcentral.com/htc-evo-4g-lte/363796-can-t-install-4-3-ruu-windows-7-8-1-a.html
post 18 fixed the problem for me, you need to download and install all one at a time with a reboot in-between each one, do not use windows update to update any of them.
Click to expand...
Click to collapse
Seems that you are right. I tried all the suggestions here but none of them worked on my PC. So Idecided to try on my laptop. The thing is that the RUU did run well but unfotunately it ends with an error 170 usb connection error.
The laptop recognizes the phone well so I cant understand the reason for the error.

chiquito3 said:
Seems that you are right. I tried all the suggestions here but none of them worked on my PC. So Idecided to try on my laptop. The thing is that the RUU did run well but unfotunately it ends with an error 170 usb connection error.
The laptop recognizes the phone well so I cant understand the reason for the error.
Click to expand...
Click to collapse
make sure the computer recognises the phone whilst the phone is both booted and in the bootloader with fastbootUSB showing on the phone screen.

Seanie280672 said:
make sure the computer recognises the phone whilst the phone is both booted and in the bootloader with fastbootUSB showing on the phone screen.
Click to expand...
Click to collapse
Ok guys I did it thanks to your help.
Now what is the prefered rooting method and should I take the OTA or not?

chiquito3 said:
Ok guys I did it thanks to your help.
Now what is the prefered rooting method and should I take the OTA or not?
Click to expand...
Click to collapse
yes take the OTA's, if you dont like the new Lollipop you can always just flash the RUU again to get back to the older versions as your s-off.
after you've done the OTA's, to root, just flash twrp recovery: http://dl.twrp.me/m7/twrp-2.8.5.0-m7.img and then flash the superSU zip from within TWRP recovery: http://download.chainfire.eu/696/SuperSU, complete root setup once the phone has started back up by opening superSU from your app drawer.

Seanie280672 said:
yes take the OTA's, if you dont like the new Lollipop you can always just flash the RUU again to get back to the older versions as your s-off.
after you've done the OTA's, to root, just flash twrp recovery: http://dl.twrp.me/m7/twrp-2.8.5.0-m7.img and then flash the superSU zip from within TWRP recovery: http://download.chainfire.eu/696/SuperSU, complete root setup once the phone has started back up by opening superSU from your app drawer.
Click to expand...
Click to collapse
I updated it but it only updated to 4.4.2. There was no Lollipop update. I think that there is no officail AT&T Lollipop update.

chiquito3 said:
I updated it but it only updated to 4.4.2. There was no Lollipop update. I think that there is no officail AT&T Lollipop update.
Click to expand...
Click to collapse
There is no lollipop for at&t yet, should be released soon
http://www.htc.com/us/go/htc-software-updates/#device-content

chiquito3 said:
I updated it but it only updated to 4.4.2. There was no Lollipop update. I think that there is no officail AT&T Lollipop update.
Click to expand...
Click to collapse
alray said:
There is no lollipop for at&t yet, should be released soon
http://www.htc.com/us/go/htc-software-updates/#device-content
Click to expand...
Click to collapse
Yes during the Uh Oh announcement / interview they said they were shooting for an April 1'st update for AT&T M7

clsA said:
Yes during the Uh Oh announcement / interview they said they were shooting for an April 1'st update for AT&T M7
Click to expand...
Click to collapse
And I'm longing for that moment! Thanks again.
Since I did change the stock recovery to TWRP just for rooting the phone, could I still take the OTA upgrade or does it have to be done manually?
I also installed Xposed Framework and some HTC Modules.

chiquito3 said:
And I'm longing for that moment! Thanks again.
Since I did change the stock recovery to TWRP just for rooting the phone, could I still take the OTA upgrade or does it have to be done manually?
I also installed Xposed Framework and some HTC Modules.
Click to expand...
Click to collapse
you will have to return the phone to full stock to take an OTA update

clsA said:
you will have to return the phone to full stock to take an OTA update
Click to expand...
Click to collapse
I did something bad to the phone and would like to go back to stock can I use the RUU again and how? Because I tried and it gives a fastboot error a few seconds after starting. The RUU is actually a downgrade.
I was trying to mod the Weather widget to transparent and I ended without the widget and the phone goes to black and takes too long to come back to light the screen.
the error is htc.fastboot.exe has stopped working

chiquito3 said:
I did something bad to the phone and would like to go back to stock can I use the RUU again and how? Because I tried and it gives a fastboot error a few seconds after starting. The RUU is actually a downgrade.
I was trying to mod the Weather widget to transparent and I ended without the widget and the phone goes to black and takes too long to come back to light the screen.
the error is htc.fastboot.exe has stopped working
Click to expand...
Click to collapse
you can use my Guru_Reset to return to stock 5.x
Guru_Reset_M7_5.12.502.2_clsA.zip
http://www.androidfilehost.com/?fid=23501681358545274
If you want to keep custom recovery choose no to stock recovery during install and yes to Root

clsA said:
you can use my Guru_Reset to return to stock 5.x
Guru_Reset_M7_5.12.502.2_clsA.zip
http://www.androidfilehost.com/?fid=23501681358545274
If you want to keep custom recovery choose no to stock recovery during install and yes to Root
Click to expand...
Click to collapse
Thanks again for your reply!
How do I flash this one? can it be done through costum recovery?

chiquito3 said:
Thanks again for your reply!
How do I flash this one? can it be done through costum recovery?
Click to expand...
Click to collapse
Yes you flash it in TWRP same as a rom