I updated my lumia 830 to 14322 last week, It worked fine until it froze on the lock screen forcing me to hard reset the phone. Once i did the hard reset i wouldn't boot. I have tried flashing it about 5 - 6 times now. Nothing is working!! Microsoft won't help!
Related
So here's my story: my phone was JellyBean. I didn't tinker with it, didn't root, just used some launchers. It upgraded to KitKat. I kept using it, even though I liked JellyBean better. Then one month ago it froze and stopped responding even to physical buttons. I managed to restart it, but it wouldn't go past the intel logo. Somehow I got it to go past it and give me like two seconds on before it would freeze and become unresponsive again, so I got to enter safe mode (all following instructions on the internet, which buttons to hold to manage to get into safe mode). Once in safe mode, I deleted every app that had been recently updated or installed, one at a time, trying to turn my phone on each time, until I finally deleted facebook (that enourmous blue monstrosity taking all that internal space), and the phone seemed normal. I re-installed the other apps I had uninstalled, then one day later, it froze again. Now it wouldn't go past the intel logo. Only then I gave up and used RSDLite to re-install the firmware - BUT! The firmware I managed to find was JB, but I had been wanting to downgrade for some time, anyway, so I unlocked the bootloader and flashed JellyBean. And it worked. I was proud. Then one month later, today, it froze again. I can do the same procedure, and lose all my data again, but I fear the problem will remain unsolved and it will freeze/crash/explode one month from now. Can someone help me figure out what my problem is, or give an alternate solution to try?
TL;DR:
my razr i was stuck on the intel logo screen, I unlocked the bootloader and flashed JB, it worked, one month later it is now stuck on the WARNING BOOTLOADER UNLOCKED screen. Please help thank you.
I have a stock AT&T G6, got it when the phone first came out, and I haven't touched the firmware. Update after update, no problems.
Finally this morning my phone had enough - I performed a system update. However during the reboot, the phone froze for 30 minutes on the AT&T logo. Nothing changed.
Reset phone, nothing changed, 15 minutes no change. Reset phone to recovery mode - wipe cache - reset phone. Same thing - stuck at AT&T logo.
Finally I had enough - I did a full Factory reset. AT LAST! After 8 painful minutes stuck at the AT&T logo, my phone came to life and welcomed me to my new phone (FML).
So here I am with a freshly loaded copy of my new Nougat 7.0 software on my AT&T Build ( NRD90M.G920AUCS6EQF1 ) and I am desperately trying to run every possible data recovery option possible.
I WANT to recover my photos and SMS messages before I start using my phone. But I can't - every app I've run shows no results. Everything I'm seeing shows I need to root this phone to make it work.
Unfortunately I have no clue htf to do that. Every instruction I find online does not include my build version. My phone is turned off and not used until I recover this data. I would appreciate any help I can get in recovering this data!
Cassetti said:
I have a stock AT&T G6, got it when the phone first came out, and I haven't touched the firmware. Update after update, no problems.
Finally this morning my phone had enough - I performed a system update. However during the reboot, the phone froze for 30 minutes on the AT&T logo. Nothing changed.
Reset phone, nothing changed, 15 minutes no change. Reset phone to recovery mode - wipe cache - reset phone. Same thing - stuck at AT&T logo.
Finally I had enough - I did a full Factory reset. AT LAST! After 8 painful minutes stuck at the AT&T logo, my phone came to life and welcomed me to my new phone (FML).
So here I am with a freshly loaded copy of my new Nougat 7.0 software on my AT&T Build ( NRD90M.G920AUCS6EQF1 ) and I am desperately trying to run every possible data recovery option possible.
I WANT to recover my photos and SMS messages before I start using my phone. But I can't - every app I've run shows no results. Everything I'm seeing shows I need to root this phone to make it work.
Unfortunately I have no clue htf to do that. Every instruction I find online does not include my build version. My phone is turned off and not used until I recover this data. I would appreciate any help I can get in recovering this data!
Click to expand...
Click to collapse
No known root for current builds to my knowledge. Don't know if anyone is still picking away at it, but I wouldn't hold my breath. Development on this device has been almost silent for many months.
dandrumheller said:
No known root for current builds to my knowledge. Don't know if anyone is still picking away at it, but I wouldn't hold my breath. Development on this device has been almost silent for many months.
Click to expand...
Click to collapse
Pretty much what I've figured. Sounds like I'll just have accept they're lost and move on. Thx
Hello to all Windows Phone devs,
I am attempting to upgrade my Lumia 525 from WP8.1 to an old W10M build with .cab files using IUtool. The first time it worked flawlessly after a few tweaks in date&time. Then, I had to hard reset my phone because of some WiFi problems. The hard reset failed, for some reasons, and my phone was stuck in the BSoD. It was not a problem for me, I restores it to WP8.1 in 15 minutes. Then, I attempted another upgrade using iutool and the same .cab files. It kept showing the same error both on the command window and the phone update setting. No matter what I try, soft, hard, and factory reset and some other things, it kept showing the same error.
I also found out that this error is quite rare for iutool, not many users get this cobstantly.
Can anyone here please help me?
FYI: Software: WP8.1 latest Lumia Denim update.
Error: 0x800b010a on both PC and mobile.
Thanks in advance.
Help me
Hey did you solve this issue? I'm facing the same.
Hello. I REALY NEED HELP!! A couple of months ago when oreo got leaked for note 8 I installed it. I installed substratum themes before I did the update when I was still in 7.1.1 . When I installed the leaked oreo I had a problem that it wouldn't let me go past the lock screen unless I quick launched the camera and it said "system ui has stopped" and the phone kept vibrating. I couldn't turn off the phone.. only if I got lucky and then it would take me to a screen that said upload mode. no hard reset combo worked and only download mode combo worked. from there I would put cancel and it restarted the phone. somehow I got the phone to power off and immediately tried the hard reset combo and it worked. I factory reset it and everything went to normal. After that I never had the same issue again. But couple days ago I tried to install substratum to see if it would now work. WELL THAT WAS A HUGE MISTAKE. it was doing the same thing so I managed to factory reset it again. after that I didn't install substratum and everything would work fine until I woke up. when I woke up it kept doing the same thing so I wipped the cache and factory reset it again. Everything worked fine again and then the next morning IT DID THE SAME THING. I've factory reset it like 5 times now and don't have substratum installed at all and that doesn't work. it still says that "system ui has stoped" when I wake up in the mornings. I've been researching A LOT and I've tried to do everything the forums say but nothing works. HOW CAN I GET RID OF THIS SOFTWARE PROBLEM COPMLETLY?. (keep in mind i'm still on the beta software , I never got the official update). I even took it to a Samsung care center for a day and they told me that they couldn't fix it and I called Samsung and they said to ship it in to them so they could fix it. Have you guys been through this?
eze_espinoza said:
Hello. I REALY NEED HELP!! A couple of months ago when oreo got leaked for note 8 I installed it. I installed substratum themes before I did the update when I was still in 7.1.1 . When I installed the leaked oreo I had a problem that it wouldn't let me go past the lock screen unless I quick launched the camera and it said "system ui has stopped" and the phone kept vibrating. I couldn't turn off the phone.. only if I got lucky and then it would take me to a screen that said upload mode. no hard reset combo worked and only download mode combo worked. from there I would put cancel and it restarted the phone. somehow I got the phone to power off and immediately tried the hard reset combo and it worked. I factory reset it and everything went to normal. After that I never had the same issue again. But couple days ago I tried to install substratum to see if it would now work. WELL THAT WAS A HUGE MISTAKE. it was doing the same thing so I managed to factory reset it again. after that I didn't install substratum and everything would work fine until I woke up. when I woke up it kept doing the same thing so I wipped the cache and factory reset it again. Everything worked fine again and then the next morning IT DID THE SAME THING. I've factory reset it like 5 times now and don't have substratum installed at all and that doesn't work. it still says that "system ui has stoped" when I wake up in the mornings. I've been researching A LOT and I've tried to do everything the forums say but nothing works. HOW CAN I GET RID OF THIS SOFTWARE PROBLEM COPMLETLY?. (keep in mind i'm still on the beta software , I never got the official update). I even took it to a Samsung care center for a day and they told me that they couldn't fix it and I called Samsung and they said to ship it in to them so they could fix it. Have you guys been through this?
Click to expand...
Click to collapse
I am by no means on the level of the wonderful gentlemen that so often come to our rescue, but have you tried flashing the device's original firmware?
2Tone23 said:
I am by no means on the level of the wonderful gentlemen that so often come to our rescue, but have you tried flashing the device's original firmware?
Click to expand...
Click to collapse
I haven't successfully done it I can't find the correct software and when I tried it Odin said it failed
eze_espinoza said:
I haven't successfully done it I can't find the correct software and when I tried it Odin said it failed
Click to expand...
Click to collapse
What varient are you?
I have the exact same issue, how is this not talked about anywhere? The leaked beta was so wide spread, I'm assuming you've tried taking it to ubreakifixit? I think that's what it's called.
eze_espinoza said:
Hello. I REALY NEED HELP!! A couple of months ago when oreo got leaked for note 8 I installed it.
Click to expand...
Click to collapse
I think flashing the original firmware is your best option considering you are still on the beta.
Just post the variant you have and the country you're in and I can give you instructions on how to get the right firmware
I would advise that you take your device to a Samsung Service Center and let them take a look at it. As they will be able to help you resolve your issue
eze_espinoza said:
I've factory reset it like 5 times now and don't have substratum installed at all and that doesn't work. it still says that "system ui has stoped" when I wake up in the mornings.
https://youtu.be/zXSHe3oorIM
Click to expand...
Click to collapse
Here is a video about repair Android system issues, maybe helpful with you.
People, please help!
I decided to unlock my lumia 720, I did everything according to the instructions. At first everything went fine, but then wpinternels got stuck on flashing done. rebooting. Then the computer just stopped seeing the phone. Now the phone does not turn on and does not charge, generally like a dead one. Even wdrt doesn't see it. Is it a brick or not? Help!
People, please help!
I decided to unlock my lumia 720, I did everything according to the instructions. At first everything went fine, but then wpinternels got stuck on flashing done. rebooting. Then the computer just stopped seeing the phone. Now the phone does not turn on and does not charge, generally like a dead one. Even wdrt doesn't see it. Is it a brick or not? Help!
People, please help!
I decided to unlock my lumia 720, I did everything according to the instructions. At first everything went fine, but then wpinternels got stuck on flashing done. rebooting. Then the computer just stopped seeing the phone. Now the phone does not turn on and does not charge, generally like a dead one. Even wdrt doesn't see it. Is it a brick or not? Help!