Database Develop

[Q] Bootstrap Recovery 3, Jelly Bean OTA

Got BR3 installed on the Bionic, though never really used it until I realized I need to get my JB working, and OTA failed because I mucked with the bloatware with TB.
Any way, if I read this correctly (most guides with BR was based on BR1 or 2, and BR3 is completely different, based on TWRP) I have to
1) Backup the stock ROM
2) Setup a new ROM slot in BR3 (probably ROM-Slot-1) which is now setup, but blank and thus unbootable
3) Restore the "backup" (of stock) into this new ROM slot -- so now I have a CLONE of existing stock rom
and I can boot into either one, the clone or the real/original.
But from what I understand about the JB OTA, I CANNOT apply it through TWRP (I tried, won't recognize the file, just gives an error 6), or apparently ANY recovery except factory. But factory recovery failed because my setup is no longer "standard" (I got rid of some bloatware)
So is my only hope now to wipe the whole phone, reset to "stock" ICS, then try to pull the OTA JB or do factory recovery JB install?
Or should I wait for some intrepid hackers to repackage the OTA update into a script that is a bit more tolerate of power users?
And if I want to be intrepid and try, say, CM10.1 unofficial Targa, do I just install that into one of the ROM slots and boot off that, and ignore the JB update for now?

kschang said:
Got BR3 installed on the Bionic, though never really used it until I realized I need to get my JB working, and OTA failed because I mucked with the bloatware with TB.
Any way, if I read this correctly (most guides with BR was based on BR1 or 2, and BR3 is completely different, based on TWRP) I have to
1) Backup the stock ROM
2) Setup a new ROM slot in BR3 (probably ROM-Slot-1) which is now setup, but blank and thus unbootable
3) Restore the "backup" (of stock) into this new ROM slot -- so now I have a CLONE of existing stock rom
and I can boot into either one, the clone or the real/original.
But from what I understand about the JB OTA, I CANNOT apply it through TWRP (I tried, won't recognize the file, just gives an error 6), or apparently ANY recovery except factory. But factory recovery failed because my setup is no longer "standard" (I got rid of some bloatware)
So is my only hope now to wipe the whole phone, reset to "stock" ICS, then try to pull the OTA JB or do factory recovery JB install?
Or should I wait for some intrepid hackers to repackage the OTA update into a script that is a bit more tolerate of power users?
And if I want to be intrepid and try, say, CM10.1 unofficial Targa, do I just install that into one of the ROM slots and boot off that, and ignore the JB update for now?
Click to expand...
Click to collapse
Until they get the root situation figured out with the official update, I would just forego it for now. From what I'm reading on the forums, doing the update could lose your root. Plenty of nice JB roms we can load on the Bionic, we aren't missing much. I even have Google Now running on Eclipse 1.3 ICS.
But yeah, if you wanted to do the update, you'd likely have to uninstall bootstrap/safestrap and do a factory reset on the phone. Unfreezing what you've frozen might work, but others have run into issues due to changes they have made. Worst case scenario, you have to flash it to stock using RSD Lite (which would definitely kill your root) and then updating, but a factory reset should do the job if unfreezing doesn't work. Like I said though, you may lose root in the process, even with SuperSU and OTA Rootkeeper installed and backing up the root.

[Q&A] [STOCK][D58XX][5.0.2] Firmware 23.1.A.0.690 Generic [ROOT/XZDR/SuperSU]

Q&A for [STOCK][D58XX][5.0.2] Firmware 23.1.A.0.690 Generic [ROOT/XZDR/SuperSU]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [STOCK][D58XX][5.0.2] Firmware 23.1.A.0.690 Generic [ROOT/XZDR/SuperSU]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Can i flash zip or ftf via adb? i'm using cm12 rom.

hi guys,
I bought a Z3C and I just checked the bootloader is not locked .
pen the dialler and enter #*#7378423#*# to access the service menu.
Tap Service info > Configuration > Rooting Status. Bootloader unlock allowed says Yes
I wanted to know if I could flash via Flashtool software directly ?

OK, so I've used the method described in the thread, flashed firmware.zip from recovery on rooted 4.4.4. (.77), after flashing I wiped cache and dalvik, rebooted, android was upgraded, system booted, and all of my apps and settings remained intacted. Is this normal? I expected clean start. I used D5803_23.1.A.0.690_Generic_NCB-Root-XZDR2.8.3-SuperSU.

savudin said:
OK, so I've used the method described in the thread, flashed firmware.zip from recovery on rooted 4.4.4. (.77), after flashing I wiped cache and dalvik, rebooted, android was upgraded, system booted, and all of my apps and settings remained intacted. Is this normal? I expected clean start. I used D5803_23.1.A.0.690_Generic_NCB-Root-XZDR2.8.3-SuperSU.
Click to expand...
Click to collapse
If you didn´t wipe data in recovery, then no data should be wiped. That´s normal.

Yes, that's it. But, did I had to wipe data? I've read that clean install is recommended. I've noticed no problems in the last couple of hours of usage.

Dirty Flash from 23.0.1.A.5.77
I dirty flashed 23.1.A.0.690 from Greatslon MIUI v5 23.0.1.A.5.77 and still have root.
The phone froze and bootlooped a couple of times when i installed and restarted it, but patience was rewarded, as it finally booted.
I can still mount /system as rw both via adb shell, "onboard" terminal and through Root Browser.
Can i be of some help with a logcat, and in case how?
I am a software developer myself, but in a different branch than android. I just can't see through how i should get started with android development.
Great work guys
I guess i should add, that i still have my bootloader locked.
So to summarize:
>Bootloader locked (never unlocked)
>Firmware 23.1.A.0.690 from this thread
>Full root
>System R/W

Hey,
is there a chance to change the carrier name on the lockscreen? In the upper left corner it says "no service" but my carrier is already set up successfully.
Maybe its just because im from germany and its a generic rom or something. so is there a option to set up manually?
greets

Interesting, I did exactly the same but only have partial root, meaning that my system indicates root but I don't have writing permissions. Tried the ADB fix but did not work. Any other suggestions for getting full root again?

FYI: Nut has mentioned that he fixed recovery in his main development thread and will be working on releasing it to everyone soon.

Tnx for ur great work... but i have problem to download from mega site.. and specialy from the folder...
can anyone give me the direct link of [5.0.2] Firmware 23.1.A.0.690 Generic and A.5.77... not the folder link...
and can anyone tell me where exactly save the file we download from mega site ?
i cant find it anywhere...
Tnx alot.. :xX

How to delete recovery when it not working, thanks

Can't try new xposed for lollipop because it require install from recovery. And recovery not working in 5.0.2

air32 said:
Hey,
is there a chance to change the carrier name on the lockscreen? In the upper left corner it says "no service" but my carrier is already set up successfully.
Maybe its just because im from germany and its a generic rom or something. so is there a option to set up manually?
greets
Click to expand...
Click to collapse
edit the build.prop

what if I restore the TA Backup after that?

AndreDNA said:
what if I restore the TA Backup after that?
Click to expand...
Click to collapse
You would only need to restore the TA backup if you've unlocked your bootloader in the past.

I'm locked now, but it seem that I have to be unlocked to manage in upgrading to LP and keep the R/W is that right?
Sent from my D5803 using XDA Free mobile app

AndreDNA said:
I'm locked now, but it seem that I have to be unlocked to manage in upgrading to LP and keep the R/W is that right?
Sent from my D5803 using XDA Free mobile app
Click to expand...
Click to collapse
No, system rw is working atm with the newest(2.8.3) release from nut with locked bl. At least for Z3C . the system rw not working refers to other devices.
So when he manages to get the new recovery working you should just be able to install it. That is my hope at least. Anyway in case it doesnt you can backup with titanium backup and after flashing everything again just restore.

2mal16 said:
No, system rw is working atm with the newest(2.8.3) release from nut with locked bl. At least for Z3C . the system rw not working refers to other devices.
So when he manages to get the new recovery working you should just be able to install it. That is my hope at least. Anyway in case it doesnt you can backup with titanium backup and after flashing everything again just restore.
Click to expand...
Click to collapse
oh!
Really thanks for the answers, but I'm not sure to have understand (first sony for me).
I have kk, rooted and with locked bootloader. I have no recovery (I can't manage in flashing that without unlock), so how can I flash the preeroted LP?
I understand that if I backup TA, unlock BL, flash a recovery, flash a pre-rooted LP (after a full wipe), flash the last NUT recovery and then relock the BL restoring TA, I should finally have LP with root, R/W, and drm feature right? Am I missing something? Sorry for the High Noob Lvl xD

AndreDNA said:
oh!
Really thanks for the answers, but I'm not sure to have understand (first sony for me).
I have kk, rooted and with locked bootloader. I have no recovery (I can't manage in flashing that without unlock), so how can I flash the preeroted LP?
I understand that if I backup TA, unlock BL, flash a recovery, flash a pre-rooted LP (after a full wipe), flash the last NUT recovery and then relock the BL restoring TA, I should finally have LP with root, R/W, and drm feature right? Am I missing something? Sorry for the High Noob Lvl xD
Click to expand...
Click to collapse
Go to the thread of NUT dual recovery and (assuming your on a windows pc) download the installer for nut dual recovery. it will let you install the recovery on locked bootloader by running the install.bat file. with this recovery you can then flash a prerooted lollipop zip (you can do it yourself with prf creator, include the newest SuperSU zip and the newest dual recovery zip together with stock lollipop rom) after wiping your phone. people also just flashed over KK but i prefer to do it clean and set up my phone newly again. you will then end up with a phone which has system rw and root on lollipop but the recovery will be gone until NUT fixes it. That is what everybody is waiting for.
So unlocking BL wont really gain you anything except sonys DRM keys not working. it will just introduce an additional step to relock them.
Here is the thread: http://forum.xda-developers.com/showthread.php?t=2261606
to get into recovery just spam the volume up button(or down since it has two recoveries ) when your phone boots and lights up the led.

OTA with a rooted device?

Hi everyone, it's been a while since I started thinking to root my Moto G 2 but I still want to run on stock kernel & ROM. We are still waiting for the update to Android 5.1 and I was wondering if I could get the OTA safely with a rooted device. If not, I would wait for the official update and after this I'm going to root it; otherwise I would root it now. Thanks in advance.

I think you should wait for the OTA update and root after the update.

You won't receive any OTA updates from Motorola if you have flashed custom recovery and rooted your device

Copy that, thank you guys.

Nahuwii said:
You won't receive any OTA updates from Motorola if you have flashed custom recovery and rooted your device
Click to expand...
Click to collapse
If I understood it right, @luke! wants to run stock rom after rooting. So there is absolutely no problem to boot into TWRP 2.8.5.0, make a nandroid backup and flash latest superSU from there. OTA just cares about custom recovery and changes in system. So when an OTA arrives just restore your nandroid backup or revert the changes you made like unfreezing systemapps, uninstalling things like adaway and there will be no problem to install OTA.
Even if you flash twrp instead of booting into it,you can easily flash back the custom recovery. As long you stay stock this is all an easy thing. And also after flashing a custom rom there are ways to get back to the original firmware. @luke!:If you need any help pm me.

Wolfcity said:
If I understood it right, @luke! wants to run stock rom after rooting. So there is absolutely no problem to boot into TWRP 2.8.5.0, make a nandroid backup and flash latest superSU from there. OTA just cares about custom recovery and changes in system. So when an OTA arrives just restore your nandroid backup or revert the changes you made like unfreezing systemapps, uninstalling things like adaway and there will be no problem to install OTA.
Even if you flash twrp instead of booting into it,you can easily flash back the custom recovery. As long you stay stock this is all an easy thing. And also after flashing a custom rom there are ways to get back to the original firmware. @luke!:If you need any help pm me.
Click to expand...
Click to collapse
Great! Thank you, very appreciated If I have some problems, I will pm you. Thanks in advance

I'm rooted and have Xposed : what should i do when there is an OTA update ?

Hi,
So i have a Moto G 2 XT-1068 with Android 5.0.2 and system version 22.21.28.titan_retaildsds.retaildsdsall.ex.03 reteu.
I rooted it and installed Xposed.
Since some days, my phone notify me that there is a new (official) update avalaible :
22.56.3.en.03
My first reflex was to post in the Xposed forum :
I have a Motorola Moto G 2nd edition (2014 XT-1068) with Android 5.0.2 and these xposed versions installed :
XposedInstaller_3.0_alpha4.apk
xposed-v75-sdk21-arm-1
This morning, my phone notify me that there is a newsoftware update available :
22.56.3.en.03
Can i update ?
Will Xposed still running or do i have anything to do before or after update ?
Click to expand...
Click to collapse
then :
Yes i'm rooted (i didn't know i could install exposed without root ?!) and i ask the question to rooted users : what is the recommended behavior to have when we are rooted and there is an official update like this one ? Should i ignore it ? Should i wait ? Should i update (with one of your solutions) ?
Click to expand...
Click to collapse
and this is the reply i had :
You'll have to ask how an OTA works for that in your device forum.
For Google Android (untouched by OEM) in Kitkat, OTA used to check each important file individually and if one was modified, OTA would fail. This did not check all existing files or added files such as root, so as long as you uninstalled Xposed properly (restoring the original app_process files etc) then an OTA would be fine.
Since Lollipop, OTA checks the /system partition as a single item so any modification in any file, or any additional file will make the OTA fail. In which case, the only way to update would be to flash a stock ROM.
You will need to find out in your device forum which of these applies to your device.
Click to expand...
Click to collapse
So this is it, i make a post in this Moto G 2014 forum

Doing the OTA will most likely delete the XposedBridge.jar so you will have to flash it again.
Else the Xposed app will still be available but the Framework won't be installed.
If it doesn't update because the /system partition has been modified, you'll have to flash the whole rom to update.

Ok, so i can try without risk ?
And what about my root ?

nonobio said:
Ok, so i can try without risk ?
And what about my root ?
Click to expand...
Click to collapse
Root will be gone too. You'll have to root it again by flashing SuperSu Zip though a custom recovery. (TWRP)

Restore the nandroid backup of the stock system you made in TWRP before you rooted.
You also need the stock recovery for the OTA to install.
You made a backup of your system before you rooted, right?

Hi
TheKill69 said:
Root will be gone too. You'll have to root it again by flashing SuperSu Zip though a custom recovery. (TWRP)
Click to expand...
Click to collapse
Ok.
Seriously said:
Restore the nandroid backup of the stock system you made in TWRP before you rooted.
You also need the stock recovery for the OTA to install.
You made a backup of your system before you rooted, right?
Click to expand...
Click to collapse
I'm note sure i made a backup before i rooted cause i'm note sure i knew i could install recovery without root but i checked my backup plan and my oldest backup is post root
So, what do you recommand when there is OTA like this ? Should i ignore them ?
It seems to be a hard process (flash stock recovery and root again and not sure if it will be possible anyway, is it ?) for maybe a little update ?
Maybe i should wait for the next big OTA like Android 6, then be sure that a new rooting process exist before update, and also be sure that Xposed will be supported ?
So if i ignore this 22.56.3.en.03, will i be notifyed for others newer OTA (like Android 6 for instance) ?
Thanks

nonobio said:
Hi
Ok.
I'm note sure i made a backup before i rooted cause i'm note sure i knew i could install recovery without root but i checked my backup plan and my oldest backup is post root
So, what do you recommand when there is OTA like this ? Should i ignore them ?
It seems to be a hard process (flash stock recovery and root again and not sure if it will be possible anyway, is it ?) for maybe a little update ?
Maybe i should wait for the next big OTA like Android 6, then be sure that a new rooting process exist before update, and also be sure that Xposed will be supported ?
So if i ignore this 22.56.3.en.03, will i be notifyed for others newer OTA (like Android 6 for instance) ?
Thanks
Click to expand...
Click to collapse
You might have to flash the whole stock firmware back to get the stock recovery. Big waste of time.
Then rooting back means using CF Auto Root Commands again..
You have to update to it though if you want Android 6.0.
Since it won't be soon, you rather go for CM13 once it gets really stable.
Also by the way, Xposed is already supported on MM.

Thanks for these precisions.
So if i can resume : a custom rom is easier for enjoy Android updates than just Xposed.

Hi,
Can you confirm :
For someone searching advanced features like customize status bar, quick settings, shutdown menu, hardware buttons, etc : customs roms and "stock rom + exposed" are two solutions. BUT, for someone searching these same advanced features but also keep his device up to date : custom rom is really a better solution. Isn't?
I was happy when i discovered xposed as it seemed to be a easier process that flashing a custom rom, but i didn't know that i couldn't update easily..
So, what is the advantage to use xposed instead of custom rom?

Hi,
I am always thinking if i will update my stock rooted xposed rom, or if i will install a custom rom prerooted like Cyanogen mod (o have easier future updates).
i have some questions :
1- Is it possible to install xposed and modules on a custom rom like cyanogen mod ? I think yes but can you confirm ?
I know that CM come with inbuilt tweaks but i discover some great xposed module i would continue to use, even if i install CM.
2-If i keep my stock rooted xposed rom, and don't make this "little" Android 5 OTA update, will be i notified for "Android 6" ?
(i don't want to lose my time to reflash my rom, reroot mydevice, etc.., just for a little update, but i could do that for a more important update like Android 6...
3- We are agree that if i flash a custom rom like CM, it will resolve my "ota update" problem, cause there won't be "Motorola OTA" anymore, but there will be CM updates easy to make, isn't ? If yes, what could be the advantage to use stock rom rooted + xposed vs custom rom + xposed ?
Thanks

How to upgrade rooted SM-T719 from Android 6.0.1 to Android 7 or 8

Hi,
about 2 years ago I rooted my S2 Galaxy Tab (T719) and now I would like to upgrade from Android 6.0.1 to Android version to 7 or 8. I have googled for instructions on how to upgrade a rooted S2 Tab but did not find anything useful (most info is on OTA upgrades which no longer works on rooted devices). Could someone please post step-by-step instructions (please bear in mind that I only ever deal with this kind of thing once every 2-3 years so I do not have much experience). I have TWRP v 3.0.2 installed (do I need to update this as well?) and the tablet is not encrypted (so hopefully I won't have to wipe the system partition and re-install all the app?!?). Thanks.
I also noticed that there is now a huge variety of ROMs out there. How can one know which ones are trustworthy? The main reason I rooted the tablet was to be able to increase privacy (control app permissions with XPrivacy). So I do not want to install some custom ROM that maybe contains spyware or other compromising features. Any advice on this would be greatly appreciated. Given my motivation (privacy) for rooting, would it maybe be better to go back to Stock ROMs (i.e. non rooted) and simply control web access via netguard (by preventing net access for some apps, they may still spy on my contacts, location, or email but cannot phone home to transmit the information)? At least I would still get OTA updates because being excluded from the OTA channel also poses a security risk in itself I suppose. Ok so any advice would be appreciated.
Thank you in advance!

There is no official Android 8 for our device. If you want 8 or 9 you have to install a custom ROM like LuK1337's LineageOS port. It is as safe as LineageOS is by itself on any device. Only problem you might have then is that calling is not possible anymore for now, but LTE works. If you want to use LOS, you HAVE to format data because it's not compatible at all. If you wanna stay on official Android you might keep it. Installing is done by flashing the official firmware with the correct country code over Odin. This will remove TWRP at first so you have to reflash it by Odin afterwards. For firmware download I always use: https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 and Odin is found by google. If you wanna got the way to LOS you have to do all the steps I mentioned before too anyways to have a recent Modem firmware and bootloader. In that case you just have to flash LOS and OpenGAPPS by TWRP and delete /data aka Factory reset.
Regardless what you do, after ODIN is done, you HAVE TO boot into TWRP immediately to keep it from being removed by official firmware. While you are in there anyways you can install magisk to keep it from encrypting /data

Many thanks emuandco. So I guess I will stick with the Android 7 as I do not want to reformat the tablet and reinstall all the apps. I have started to download the Android 7 stock ROM, but it is taking quite long so in the meantime just to confirm, the steps to follow are:
1- use odin to flash the stock ROM (no steps required prior to this? I simply overwrite the existing ROM? I suppose that I will loose root then and need to re-root the device using the standard procedure as explained here: http://www.samsungsfour.com/tutoria...nougat-7-0-using-cf-auto-root-all-models.html ?)
2- use odin to flash TWRP (I will need the newest version I guess and cannot use the same as for Android 6?)
3- boot into recovery mode to ensure that TWRP does not get overwritten
4- done
Is this correct? Do I then need to reinstall Xposed, SuperSU and Xprivacy or will they be preserved?
Thanks again!
P.S.: BTW, I also found these instructions: https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627 which are slightly different from http://www.samsungsfour.com/tutoria...nougat-7-0-using-cf-auto-root-all-models.html and require a wipe of the data partition. Does this mean that for an update to Android 7 I definitely do need to wipe the data partition? If this is the case then this would be a major disadvantage of rooting in the first place and maybe I simply flash the stock ROM and do not root at all but go the "netguard" route as mentioned in my original message?

I never used the official Firmware that much. Fist thing I did was going on LuK1337's nerves to get a port of LOS for it up and running So no clue if Samsung manages to keep /data but I guess so. Yeah, looks fine what you list there. You COMPLETELY overwrite ANY modification in kernel or /system, so reflash your mods and root (Magisk). I always recommend to uase the MOST recent TWRP. (https://dl.twrp.me/gts28velte/ should be it in your case).
Ah and looking at your manuals... Check OEM unlock just to be rather safe than sorry if things go mad.

emuandco said:
I never used the official Firmware that much. Fist thing I did was going on LuK1337's nerves to get a port of LOS for it up and running So no clue if Samsung manages to keep /data but I guess so. Yeah, looks fine what you list there. You COMPLETELY overwrite ANY modification in kernel or /system, so reflash your mods and root (Magisk). I always recommend to uase the MOST recent TWRP. (https://dl.twrp.me/gts28velte/ should be it in your case).
Ah and looking at your manuals... Check OEM unlock just to be rather safe than sorry if things go mad.
Click to expand...
Click to collapse
Deleted