CYANOGENMOD 10.1 FOR MINI2 S6500
Hey , I would like today to present to you my production CM 10.1
Thanks @bleached for his sources
Rom is dedicated to holders S6500 / S6500D.
Changelog:
20160429:
- Increase Performance
- Better Battery life
- Disable Debug Kernel/Frameworks_base
- Implement Tweaks and optimizations
Tips (Please read before fllashing):
-After ROM boots for first time, do the setup (enter account and such) and then DO A REBOOT! This could save you from 2 of the 4 of the below tips, and perhaps save me from questions about battery drain issues due to NFC.
-Trebuchet (the default launcher) might present some graphical glitches. I haven't notice that in any other launcher, so perhaps it is Trebuchet only problem. Perhaps you want to use another launcher..
-Wifi IP address will be the same after the second time you enable wifi. So when booting for first time you might want to disable wifi and re-enable it (or do a reboot ).
-For NFC users, after flashing ROM and booting for first time, you won't be able to turn NFC off. So don't try to do so. Instead, after first boot, do a reboot and everything should be fine.
Download Link:
https://drive.google.com/file/d/0B45vqOAMyIayVU1TSWRkMllMRUU/view?usp=sharing
Gapps:
https://drive.google.com/file/d/0B45vqOAMyIaycGtjRENVaHZtVG8/view?usp=sharing
Sources
https://github.com/Malpa73
Credits :
- bleached
- TheWhisp
- Samsung
- Arter97
- KreAch3R
Contributors
#Malpa73
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 2.6.x
Based On: CyanogenMod
Version Information
Status: Test
Created 2016-04-29
Last Updated 2016-04-29
Thread title says: "CyanogenMod 10.1"
But in OP you say CyanogenMod 11.
Thanks. I will test it
Editeleted
FracturedSkull said:
Kamil Toczek. Türk müsün lan sen
Click to expand...
Click to collapse
This is an English speaking forum ALL posts must be in English
Regards
Moderation Team
sawdoctor said:
This is an English speaking forum ALL posts must be in English
Regards
Moderation Team
Click to expand...
Click to collapse
Sorry. I don't knew
Will it work on GT-S6500D (it's the version without NFC, if I'm right)?
edit: Sorry, I can't read (spoiler: yeah, sure)
#Malpa73 said:
CYANOGENMOD 10.1 FOR MINI2 S6500
Hey , I would like today to present to you my production CM 10.1
Thanks @bleached for his sources
Rom is dedicated to holders S6500 / S6500D.
Changelog:
20160429:
- Increase Performance
- Better Battery life
- Disable Debug Kernel/Frameworks_base
- Implement Tweaks and optimizations
Tips (Please read before fllashing):
-After ROM boots for first time, do the setup (enter account and such) and then DO A REBOOT! This could save you from 2 of the 4 of the below tips, and perhaps save me from questions about battery drain issues due to NFC.
-Trebuchet (the default launcher) might present some graphical glitches. I haven't notice that in any other launcher, so perhaps it is Trebuchet only problem. Perhaps you want to use another launcher..
-Wifi IP address will be the same after the second time you enable wifi. So when booting for first time you might want to disable wifi and re-enable it (or do a reboot ).
-For NFC users, after flashing ROM and booting for first time, you won't be able to turn NFC off. So don't try to do so. Instead, after first boot, do a reboot and everything should be fine.
Download Link:
https://drive.google.com/file/d/0B45vqOAMyIayVU1TSWRkMllMRUU/view?usp=sharing
Gapps:
https://drive.google.com/file/d/0B45vqOAMyIaycGtjRENVaHZtVG8/view?usp=sharing
Sources
https://github.com/Malpa73
Credits :
- bleached
- TheWhisp
- Samsung
- Arter97
- KreAch3R
Contributors
#Malpa73
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 2.6.x
Based On: CyanogenMod
Version Information
Status: Test
Created 2016-04-29
Last Updated 2016-04-29
Click to expand...
Click to collapse
Your ROM is really good but it isn't supporting NFC. Could you add NFC next time?
@xEmre66
Yes, this is a test build
Nexus 4 ❤❤❤
I didn't ask: Is this a test build?
I asked : Could you add NFC next time??????
:/
Sent from my SM-G930F using XDA-Developers mobile app
Today is upload v2 test build, and add version NFC
Nexus 4 ❤❤❤
#Malpa73 said:
Today is upload v2 test build, and add version NFC
Nexus 4 ❤❤❤
Click to expand...
Click to collapse
Ok thanks. I'm using your rom and it's faster than bleached's cm10.1 improved and the battery life is better but no nfc
Sent from my SM-G930F using XDA-Developers mobile app
But tomorrow it delivers new build, needs time for compilations
Nexus 4 ❤❤❤
Installing latest version now! Gapps from op, they are soo small 8,7 mb and they show error like "something was changed", had to mount usb from recovery and flashed "gapps-jb-20130812-signed" instead no error!
@ultravy
Download gapps again and try again
Nexus 4 ❤❤❤
I usually dont check for md5 and it didn't cross my mind to download again, but i solved the problem!
What recovery shall I use ?
dzajkof said:
What recovery shall I use ?
Click to expand...
Click to collapse
CWM 6.0.5.1 by @simokb1996 or TWRP 2.8.5.0 by @simokb1996 (same dev).
This build is very good! @#Malpa73
Sent from my SM-G930F using XDA-Developers mobile app
Testing a new build, and on day upload
Nexus 4 ❤❤❤
#Malpa73 said:
Testing a new build, and on day upload
Nexus 4 ❤❤❤
Click to expand...
Click to collapse
Good! I'm waiting .
Maybe you can join our WhatsApp Group for Mini 2?!?!.
If you have WA, then send me your number via Private Message in XDA.
[emoji6] [emoji6] [emoji2]
Sent from my SM-G930F using XDA-Developers mobile app
Related
CyanogenMod 10 for Samsung Galaxy Mini 2
Notice:
Because the ROM is only tested on GT-S6500D, only this variant of Mini 2 is supported by me (since I only have this variant of Mini 2).
Functionality can be broken on other variants.
The ROM theoretically can be installed on:
GT-S6500
GT-S6500D
GT-S6500L
Notice 2:
Uploading my files elsewhere (mirroring) is not appreciated.
If you need to add my files somewhere else, just post the link to my goo.im account.
Disclaimer:
If you have decided to install this ROM on your device, TheWhisp cannot be held responsible for any damage done to your phone and/or for any other kind of inconveniences.
By installing this ROM, you accept this rule.
Click to expand...
Click to collapse
What's not working:
* Camcorder
Special thanks to:
People who helps me with testing and provides logs
Everyone who is working on CyanogenMod 10, especially the CM team itself
KonstaT - he has done an awesome job
Additional information / resources:
Change logs: see 2nd post of this thread
Google apps: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Download (stable - milestone builds): http://goo.im/devs/thewhisp/jena-cm10
How to install:
1) You must have custom recovery installed on your device. I recommend ClockWorkMod: http://forum.xda-developers.com/showthread.php?t=2156194
2) Download ROM .zip
3) Download Google apps
4) Put both .zip files on your device (either internal or external storage)
5) Boot your device into recovery mode
6) Make nandroid backup (if needed)
7) Wipe data/factory reset (not needed if installing above previous cm10.2 build)
8) Format /system (only if the previous ROM is CM 10/10.1)
9) Install the ROM .zip file
10) Mount /system, install Google apps
11) Done.
Bug reporting:
https://github.com/TheWhisp/android_device_samsung_msm7x27a-common/issues?state=open
1) Visit the above link
2) Click on "New issue"
3) Enter title that explains the problem
4) Explain your problem very clearly with as much details as possible
5) Attach logs and screenshots (if needed)
Don't report a bug if it's already reported.
Don't report a bug if you:
1) have restored apps with Titanium Backup or similar software
2) are using any kind of task killer
3) are using any 3rd party tweak/hack
Name what device you're using: jena, jenad or trebon
Name CM version you're using: 10, 10.1, 10.2
Use proper English, try not to make any spelling errors so I and other people can understand you correctly.
Click to expand...
Click to collapse
XDA:DevDB Information
CyanogenMod 10 for Samsung Galaxy Mini 2, a ROM for the Samsung Galaxy Mini
Contributors
TheWhisp
ROM OS Version: 4.1.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 20131226
Stable Release Date: 2013-12-26
Created 2013-10-11
Last Updated 2013-12-26
Reserved
26/12/2013
* Linux 3.4.70
* New Wi-Fi driver - ath6kl
* Update Adreno driver
* Update OMX driver
* Enable LPA (low power audio)
* Enabled ION
* Other changes/improvements (minor)
Best news this year.
Btw. what kernel are you using, did you made something new or it's the squadzone's one?
Also regarding official JB for Mini 2 which was confirmed, do you think it will be helpful to develop fully working cm10 with it?
If you want reserved
k3lcior said:
Best news this year.
Btw. what kernel are you using, did you made something new or it's the squadzone's one?
Also regarding official JB for Mini 2 which was confirmed, do you think it will be helpful to develop fully working cm10 with it?
Click to expand...
Click to collapse
currently it's stock samsung kernel with updated kgsl drivers. Yes, it will be helpful.
It will because we will have Kernel 3.x
Sent from my GT-S5570 using xda app-developers app
what a news......
Waiting....................................................................................
honkey donkey, ver good, sir. Can you also port CM 7
For GT-6500??
Enviado desde mi GT-S6500 usando Tapatalk 2
It will work on it too. There is only GT-S6500D in Latvia
Ok. Thanks TheWhisp!
Enviado desde mi GT-S6500 usando Tapatalk 2
TheWhisp said:
It will work on it too. There is only GT-S6500D in Latvia
Click to expand...
Click to collapse
Can you port CM 7 ?
My current project is CM9, so no
TheWhisp said:
My current project is CM9, so no
Click to expand...
Click to collapse
screan plees
andpaw14 said:
screan plees
Click to expand...
Click to collapse
CM9 looks same on all devices... just look on another device.
@TheWhisp
Do you have a Twitter or G+ account to follow your progress?
Yes, I have an G+ account. Just see my XDA profile. The info is there
Galaxy Mini 1
TheWhisp said:
Yes, I have an G+ account. Just see my XDA profile. The info is there
Click to expand...
Click to collapse
Say please. You stopping develop mini 1 once and for all???
Very good news :good:
thanks a lot wonderful news I would love to get ics on mini 2 at last.. ready to test your work! (
I also have a defy and flashed something like 30 builds in the last months.. )
@TheWhisp
Are you planning to push the source to github?
CyanogenMod 10.2 for Samsung Galaxy Mini 2
Notice:
Because the ROM is only tested on GT-S6500D, only this variant of Mini 2 is supported by me (since I only have this variant of Mini 2).
Functionality can be broken on other variants.
The ROM theoretically can be installed on:
GT-S6500
GT-S6500D
GT-S6500L
Notice 2:
Uploading my files elsewhere (mirroring) is not appreciated.
If you need to add my files somewhere else, just post the link to my goo.im account.
Disclaimer:
If you have decided to install this ROM on your device, TheWhisp cannot be held responsible for any damage done to your phone and/or for any other kind of inconveniences.
By installing this ROM, you accept this rule.
Click to expand...
Click to collapse
What's not working:
* Camera
Special thanks to:
People who helps me with testing and provides logs
Everyone who is working on CyanogenMod 10.2, especially the CM team itself
Additional information / resources:
Change logs: see 2nd post of this thread
Google apps: http://goo.im/gapps/gapps-jb-20130813-signed.zip
Download (nightly - test builds): http://goo.im/devs/thewhisp/jena-cm10.2-nightly
Download (stable - milestone builds): http://goo.im/devs/thewhisp/jena-cm10.2
How to install:
1) You must have custom recovery installed on your device. I recommend ClockWorkMod: http://forum.xda-developers.com/showthread.php?t=2156194
2) Download ROM .zip
3) Download Google apps
4) Put both .zip files on your device (either internal or external storage)
5) Boot your device into recovery mode
6) Make nandroid backup (if needed)
7) Wipe data/factory reset (not needed if installing above previous cm10.2 build)
8) Format /system (only if the previous ROM is CM 10/10.1)
9) Install the ROM .zip file
10) Mount /system, install Google apps
11) Done.
Bug reporting:
https://github.com/TheWhisp/android_device_samsung_msm7x27a-common/issues?state=open
1) Visit the above link
2) Click on "New issue"
3) Enter title that explains the problem
4) Explain your problem very clearly with as much details as possible
5) Attach logs and screenshots (if needed)
Don't report a bug if it's already reported.
Don't report a bug if you:
1) have restored apps with Titanium Backup or similar software
2) are using any kind of task killer
3) are using any 3rd party tweak/hack
Name what device you're using: jena, jenad or trebon
Name CM version you're using: 10, 10.1, 10.2
Use proper English, try not to make any spelling errors so I and other people can understand you correctly.
Click to expand...
Click to collapse
XDA:DevDB Information
CyanogenMod 10.2 for Samsung Galaxy Mini 2, a ROM for the Samsung Galaxy Mini
Contributors
TheWhisp, erikcas
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Flash latest stock ROM by Samsung to ensure your baseband is up-to-date!
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: beta 3
Beta Release Date: 2013-12-03
Created 2013-10-11
Last Updated 2013-12-03
Reserved
18/09/2013
* Initial nightly build
13/10/2013 - beta 1
* Linux 3.0.99
* Android 4.3.1
* Fixed FM radio
* Fixed external storage (SD card) detection
* Added option to make external storage as primary (Settings > Storage)
* Includes device specific fixes that were added to CM-10.1 builds
16/11/2013 - beta 2
* Linux 3.4.68
* Low Power Audio support (for mp3 and aac audio)
* ION memory management
* Fixed "Wi-Fi optimization" bug
* Fixed Wi-Fi MAC address detection
* Fixed Google Maps corruption
* Fixed video streaming
* Improved video playback performance
* Updated display HAL and GPU blobs
* Fixed off-mode charging
* Partially working Wi-Fi Direct (can find devices, but cannot pair)
* Other improvements, see my Github account for detailed change-log
03/12/2013 - beta 3
* Linux 3.4.70
* Fixed some issues in off-mode charging
* Enabled SELinux (permissive)
* Other minor improvements
Awesome!
Thanks a LOT man!!!!
OK TheWhisp you are genious. But I have question. Does this "hack" for WiFi AP work from latest CM10.1 or it's some kind of new one?
I wait for the first build to be uploaded.
midzan21 said:
OK TheWhisp you are genious. But I have question. Does this "hack" for WiFi AP work from latest CM10.1 or it's some kind of new one?
Click to expand...
Click to collapse
Yea, it's the same. I'll upload first build later today
Sent from my GT-S6500 using xda app-developers app
Nice! If you were a women i would say "i love you" but now i'l just say i'l buy you a beer
TheWhisp said:
Yea, it's the same. I'll upload first build later today
Sent from my GT-S6500 using xda app-developers app
Click to expand...
Click to collapse
Do CM10.2 will support blueZ? just like the fix done on CM10.1 from CAF.
tekkenl0rd13 said:
Do CM10.2 will support blueZ? just like the fix done on CM10.1 from CAF.
Click to expand...
Click to collapse
CAF has added support for FM radio and Bluez. Maybe they won't do it this time.
Anyway, camera and Wi-Fi are not working. So the build will be delayed.
TheWhisp said:
Anyway, camera and Wi-Fi are not working. So the build will be delayed.
Click to expand...
Click to collapse
Could you upload that build as nightly and reupload when you fix it?
xfim said:
Could you upload that build as nightly and reupload when you fix it?
Click to expand...
Click to collapse
I don't think that anyone will use it ,until the wifi is currently not working ,but for testing ,uhm I don't know about ,maybe you could use the CM10.2 for developers (Development section goo.im) but I don't even think that these builds will be for daily use , so just wait for the most stability
Sent from my GT-S7500 using xda premium
I think bluetooth will never be fixed
Enviado desde mi GT-S6500D usando Tapatalk 2
When will you upload the first build?
Whenever I want. I have no intentions uploading an unstable build.
blurhns said:
When will you upload the first build?
Click to expand...
Click to collapse
Why would you want such an unsable build? Most of the stuff isn't even working yet. Let OP stabilize this build first. Also OP, can you add in this build the ability to put the clock in the middle of the status bar? Or the ability to disable the bootscreen for a faster boot? Or the ability to change the status bar opacity?
Sent from my GT-S6500 using XDA Premium 4 mobile app
great so finaly you work on 4.3
TheWhisp said:
CAF has added support for FM radio and Bluez. Maybe they won't do it this time.
Anyway, camera and Wi-Fi are not working. So the build will be delayed.
Click to expand...
Click to collapse
what do you think is the percentage of bluetooth to work on android 4.3?.
since we'll now be working with bluedroid unlike the blueZ we used in CM10/10.1?
I think that the best ROM for our Jena cm9 Cuz it's supported by the hardware manufacturer and smoother faster and it will be the best ROM from performance and graphics and games and it will be a lot a lot Faster everything will be great with cm9 who is with me ?
Sent from my GT-S6500 using Tapatalk 2
NiceIceDice96 said:
I think that the best ROM for our Jena cm9 Cuz it's supported by the hardware manufacturer and smoother faster and it will be the best ROM from performance and graphics and games and it will be a lot a lot Faster everything will be great with cm9 who is with me ?
Sent from my GT-S6500 using Tapatalk 2
Click to expand...
Click to collapse
sources are available, you're free to do what you want
there's no point on building CM9, (just my opinion).
CyanogenMod 11.0 for Samsung Galaxy Mini 2
Notice:
Because the ROM is only tested on GT-S6500D, only this variant of Mini 2 is supported by me (since I only have this variant of Mini 2).
Functionality can be broken on other variants.
The ROM theoretically can be installed on:
GT-S6500
GT-S6500D
GT-S6500L
Notice 2:
Uploading my files elsewhere (mirroring) is not appreciated.
If you need to add my files somewhere else, just post the link to my goo.im account.
Disclaimer:
If you have decided to install this ROM on your device, TheWhisp cannot be held responsible for any damage done to your phone and/or for any other kind of inconveniences.
By installing this ROM, you accept this rule.
Click to expand...
Click to collapse
What's not working:
* Camera
* Native screen recording
Special thanks to:
People who helps me with testing and provides logs
Everyone who is working on CyanogenMod, especially the CM team itself
Additional information / resources:
Change logs: see 2nd post of this thread
Google apps: http://wiki.cyanogenmod.org/w/Google_Apps
Download: http://goo.im/devs/thewhisp/jena-cm11
How to install:
1) ClockWorkMod 6.0.4.5 (or higher) is required to install this ROM! http://forum.xda-developers.com/showthread.php?t=2156194
2) Download ROM .zip
3) Download Google apps (optional)
4) Put both .zip files on your device (either internal or external storage)
5) Boot your device into recovery mode
6) Make nandroid backup (if needed)
7) Wipe data/factory reset (not needed if installing above previous cm11 build)
8) Format /system (only if the previous ROM is not the same CM version)
9) Install the ROM .zip file
10) Mount /system, install Google apps
11) Done.
Bug reporting:
https://github.com/TheWhisp/android_device_samsung_msm7x27a-common/issues?state=open
1) Visit the above link
2) Click on "New issue"
3) Enter title that explains the problem
4) Explain your problem very clearly with as much details as possible
5) Attach logs and screenshots (if needed)
Don't report a bug if it's already reported.
Don't report a bug if you:
1) have restored apps with Titanium Backup or similar software
2) are using any kind of task killer
3) are using any 3rd party tweak/hack
Name what device you're using: jena, jenad or trebon
Name CM version you're using: 10, 10.1, 10.2, 11
Use proper English, try not to make any spelling errors so I and other people can understand you correctly.
Click to expand...
Click to collapse
XDA:DevDB Information
CyanogenMod 11.0 for Samsung Galaxy Mini 2, a ROM for the Samsung Galaxy Mini
Contributors
TheWhisp, erikcas, legaCyMod, Dazzozo and everyone else that is working on CM11
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: CWM 6.0.4.5+
Based On: CyanogenMod
Version Information
Status: Beta
Current Stable Version: RC1
Current Beta Version: Beta 2
Beta Release Date: 2014-03-07
Created 2013-12-18
Last Updated 2014-03-08
Reserved
18/12/2013
* Initial build
nightly 28/12/2013
* Set SELinux to permissive
* Fixed FM radio
* Low Power Audio
* Force apply themes
* Fix "adb root" hang
* Updated touchscreen driver API
* Camera can take pictures and capture panorama
nightly 29/12/2013
* Linux 3.4.72
* Add back 9MB of RAM
* Fixed zRam
nightly 03/01/2014
* Linux 3.4.75
* Add option to force-enable KitKat graphical goodies keeping low-ram support ( persist.sys.force_highendgfx )
* Enable zRam by default ( 18 % )
* Some video playback fixes
First.
Whats the android version? 4.4.1 or 4.4.2 ?
very very very very good to see our MINI 2 running ANDROID4.4 KITKAT.........
THANKS GUYS FOR THIS GREAT WORK.....AND THANK YOU TheWhisp
The file you requested was not found. Is it uploaded or it's in progress? Thanks a lot for your hard work guys!
Could someone test if the white screen still appearing in kitkat ? I can see that the kernel has been changed from 3.0.x to 3.4.x :3
Great, going to test it sometime soon!
Sent from my GT-S6500D using Tapatalk 2
RedLynx90 said:
Could someone test if the white screen still appearing in kitkat ? I can see that the kernel has been changed from 3.0.x to 3.4.x :3
Click to expand...
Click to collapse
it's used on cm-10.2 too
TheWhisp said:
it's used on cm-10.2 too
Click to expand...
Click to collapse
Sorry thewhisp but until now I can't mount sdcard0 and when I try to format it as fat or any other type it won't I don't know why
Sent from my GT-S6500 using Tapatalk
Good job Davis wish to have a visa or MasterCard so I can't give u some cash
PS: I'm 14years old but not a noob and even now I flashed ur work of cm10.1 on 4 galaxy Jena including mine
Sent from my GT-S6500 using xda app-developers app
Can you guys confirm if everythink with the download link is ok for you, because as i said before for me the result is "The file you requested was not found".
fenomen0 said:
Can you guys confirm if everythink with the download link is ok for you, because as i said before for me the result is "The file you requested was not found".
Click to expand...
Click to collapse
Thewhisp didn't create the cm11 file on goo.im until now he said that he need few hours test it then upload it but he has linked it so when he upload it the link will be available without editing the post that's all so be patient
Sent from my GT-S6500 using Tapatalk
I am rebuilding. Since SELinux is now set to enforcing on kitkat, FM had some problems, so it won't be available in this release yet. Consider this as a preview release
Some notes:
1) If you decide to use ART:
* It will increase the size of your apps
* Updating from one release to another will take quite a time (since all apps needs to be rebuilt)
* Performance increase is barely noticeable
* It is still in beta
2) How to get kitkat goodies: edit build.prop, change ro.config.low_ram to false
TheWhisp said:
I am rebuilding. Since SELinux is now set to enforcing on kitkat, FM had some problems, so it won't be available in this release yet. Consider this as a preview release
Some notes:
1) If you decide to use ART:
* It will increase the size of your apps
* Updating from one release to another will take quite a time (since all apps needs to be rebuilt)
* Performance increase is barely noticeable
* It is still in beta
2) How to get kitkat goodies: edit build.prop, change ro.config.low_ram to false
Click to expand...
Click to collapse
But if I set low_ram= false
The phonr will be lag
Sent from my GT-S6500D using Tapatalk 2
aamj1997 said:
But if I set low_ram= false
The phonr will be lag
Sent from my GT-S6500D using Tapatalk 2
Click to expand...
Click to collapse
But he said clearly if you decide so if it will be laggy he is know that and you too so just don't decide
Sent from my GT-S6500 using Tapatalk
finally CM11 on Galaxy Mini 2 thank you very very much TheWhisp
Is this rom use "ion"?
Inviato dal mio GT-I9300 utilizzando Tapatalk
Can somebody post screenshots for cm11
Sent from my GT-S6500 using Tapatalk
I will in about 30 minutes , i set runtime interface to ART , it moves very fast ..I will take some screenshots after I install gapps
NFC-SMARTAGS said:
Hello, the wisp,
i really want to say a very big thanks you for your hard work for the s6500 community,
i know you have a s6500D like phone,
i want to know if somebody here have some developper android competence to do a rom for s6500 WITH the NFC function in the kernel of 3.4
because in kitkat, android have deployed a new big function who called HCE ( host card emulation )
thanks a lots
Click to expand...
Click to collapse
I'll try it this weekend.
Screenshots: http://forum.xda-developers.com/devdb/project/?id=2074#screenshots
Please do not post about a bug or crash unless you have a logcat to accompany it.
Download Latest:
Beta 1 - Changelog
Mirror - PeteLeFreak
Mirror - Spanna
MD5: f8ef0c3e6a669bd5e7a952efa1007f9b
Previous
Preview 5 (Reuploaded)
Preview 4
Preview 3
Preview 2
Preview 1
Bloat:
This bloatware was removed in Beta 1. You can install it at any time, preferably while installing the ROM. Installing any of these, rather than using other Play Store alternatives, may increase lag and RAM usage.
Accuweather
AllShare
Fonts
Live Wallpapers
Music
MyFiles
Oma
Paper Artist
Samsung Apps
Samsung Wallet
SCloud
SPlanner
SPrint
SVoice
Video
Widgets
Yahoo
GitHub
If you appreciate our work, small donations are always welcome, to any of contributors. But don't worry, we're doing this to show Samsung that kitkat WILL run well on SGS3, and we don't beg for money or silly petitions to continue.
You can use this ROM as a base for your ROM if you understand that it's in alpha stage and it doesn't work quite stable yet. However, no support will be given and by using it you fully understand that you're on your own with porting and using it.
If you decide to do so, you need to include proper information that your ROM is based on "ArchiPort", and leave a link to this thread. Using our ROM as a base without doing so will result in immediate report to moderators
We do what we like and we like what we do, simple as that.
XDA:DevDB Information
[ROM] [4.4.2] [Stock] [Sammy] [N7100 Port] ArchiPort | Finished, ROM for the Samsung Galaxy S III I9300
Contributors
JustArchi, Kryten2K35
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Based On: N7100 4.4.2
Version Information
Status: Stable
Current Beta Version: Beta 1
Beta Release Date: 2014-07-02
Created 2014-05-12
Last Updated 2014-07-31
Working:
- Calls
- All sensors
- Wi-Fi
- GPS
- 3G
- SMSes / MMSes
- Camera
- Lockscreen effects
- Most of the apps and functions
- Android 4.4.2
- Rotation
Not working:
Nothing?
Please keep this thread development-oriented
Use general thread here for discussion or questions
Two more.
Credits:
@Kryten2k35 - Collaborator
@arter97 - For Wi-Fi, SdcardFS and RIL porting tips.
@forumber2 - For first working port of N7100 kernel and a perfect base for our current kernel
@george stamatos - For a good tip regarding fixing Wi-Fi issue
awesome work bro!
is haptic feedback working? EDIT: not working yet
looks it's smoother than 4.3,from video
:good::good::good::good:
Pls dont post unecessary thanks
Instead press the thank button
Remember its development thread not a general one .
Sent from my GT-I9300 using XDA Free mobile app
ayoubij said:
awesome work bro!
is haptic feedback working? EDIT: not working yet
Click to expand...
Click to collapse
Yes, haptic feedback is working.
@JustArchi for CEO of SkyNet
Sent from my GT-I9300 using Tapatalk
It´s a great notice.
no better tribute to @JustArchi
post by @Kryten2k35 : http://forum.xda-developers.com/showpost.php?p=52586923&postcount=334
JustArchi for Recognised Developer 2014. :victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory::victory:
Sammy is watching this :cyclops:
It'd be great if @Lord Boeffla can look at the kernel source/modifications and craft us a kernel.
EDIT:L
Though probably when it's ready.
Archi for president.
Sent from my GT-I9300 using Tapatalk
we need link to download or not yet
Romancy said:
we need link to download or not yet
Click to expand...
Click to collapse
83%, Preview 1.
i want to thanxe sooooooooooooooooo much nice work iam wait
Romancy said:
i want to thanxe sooooooooooooooooo much nice work iam wait
Click to expand...
Click to collapse
https://mega.co.nz/#!HcQnBKQT!W0cUV7D8tBdxRux_X-ZD3IMWTAEdNVWHpcXol1Y42z8
I'll also update OP.
JustArchi said:
83%, Preview 1.
Click to expand...
Click to collapse
from the vedio,looks it's smoother than 4.3!!!
In other related news, Tapatalk downloads reached sky high as well as Archi's thank meter blew up from being over fed +1's.
Coincidence? I think not
We've moved!
Downloads (for posterity)
Gapps - use any ARM (not ARM64) 6.0 variant. Do not boot the ROM before flashing these, or you will have to factory reset. For Now on Tap, use mini or higher
Build 7 - 2015-12-12
Build 6 - 2015-12-10
Build 5 - 2015-12-09
Build 4 - 2015-12-06
Build 3 - 2015-12-05
Build 2 - 2015-12-04
Build 1 - 2015-12-03
XDA:DevDB Information
EOL - Unofficial CyanogenMod 13 for i9300, ROM for the Samsung Galaxy S III I9300
Contributors
forkbomb444, Haxynox team, Nameless team, JustArchi
Source Code: https://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: No Longer Updated
Created 2015-12-03
Last Updated 2015-12-20
Changelog
Build 7
Fix init.d (should fix camera for the most part, etc.)
Fix 2G/3G toggle
Enforcing SELinux
Older builds
Build 6
Fix GPS
Fix DRM
Fix some sepolicy denials
Build 5
Android 6.0.1 ("MMB29M") + December security patches
720p front-facing camera recording
fix p2p wifi (screen mirroring should work now)
fix network dropouts on hang up
Build 4
Fix 'optmising apps' on every boot
Merge screen mirroring fixes (hopefully it'll work, I can't test)
Build 3
Fix RIL brokenness from last build
Maybe fix sim lock - hopefully someone who knows their PUK can confirm
Enable uid_cputime in the kernel
Build 2
Fix video playback in most apps - DRM'd content is still broken, so apps like Play Movies won't work.
Fix video recording
FAQ
Root?
CM ships with root, enable developer options and look in Settings -> Developer options -> root access
Doze?
Doze needs a "significant motion" sensor (which uses the accelerometer) to function. The S3 doesn't have this at the moment, and its accelerometer is probably not low-power enough to implement it. At the moment, doze doesn't work, but I might investigate it at some point(tm)
Stock browser crashes when downloading?
You need to grant it permission to access storage in Settings -> Apps -> Browser -> Permissions
Google camera crashes?
Use Google Camera from the play store, not from gapps
Bootloop?
Try wiping data, cache, dalvik, system and re-installing. Some people have reported that dirty flashing over CM 12.1 works.
noones said nothing im going to give it a go. currently on 12.1 and will be doing a full wipe... fingers crossed:silly:
EDIT: Smooth 258MB via mega ( gapps took twice as long to download arm 6.0 mini 3 December 2015
Size: 245.49 MiB )
Let me be the first to thank you for bringing this to us s3 users
And for other members who doesn't know this member is also new maintainer who is trying to build official cm13 (correct me if im wrong)
Sent from my GT-I9300
Finally !!!
Thanks @forkbomb444.
Let me try it. :3
Sent from my GT-I9300 using Tapatalk
ASOP keyboard FC constantly
EDIT: flashed without gapps and works ok so far
No SD's show in windows
Omg so this is finally happening!!!! I've been patiently waiting for MM since the day CM confirmed they had a new maintainer for the i9300 ?.
Also constantly keyboard fc but fix it by installing Google keyboard via apk and disabling aosp one
Also YouTube videos are black but with sound
Flashed with no issues with open gapps
For a first build its pretty impressive
Sent from my GT-I9300
Scorpionea said:
Also constantly keyboard fc but fix it by installing Google keyboard via apk and disabling aosp one
Also YouTube videos are black but with sound
Flashed with no issues with open gapps
For a first build its pretty impressive
Sent from my GT-I9300
Click to expand...
Click to collapse
Could you please provide a logcat? @forkbomb444 stated that he won't fix any bugs unless logcats are provided.
Romflasher69 said:
Could you please provide a logcat? @forkbomb444 stated that he won't fix any bugs unless logcats are provided.
Click to expand...
Click to collapse
I think he already knows all or almost all bugs,no point in logcat as rom is way to early in development
But for sure will provide logcat if needed
Sent from my GT-I9300
Yes! Finally! The moment I have been waiting for. @forkbomb444 And with the kind of passion the developer has I am pretty sure the bugs will be fixed pretty soon!
@forkbomb444
Here is the logcat for YouTube app black screen on video but sound works
http://pastebin.com/jBndJ5Yx
YouTube videos works fine via chrome browser tho
Sent from my GT-I9300
Amazing !!
The animation while opening dialer and clear all task on recent app is very smooth. Wich isn't happen on LP.
Sent from my GT-I9300 using Tapatalk
nice work!
Hello,
Can anybody give me the download link of the latest Version of twrp please.
Edit: now o found the link. But how can i install the img File?
Thanks in advanced
@forkbomb444
Very much thanks for the release of marshmellow
Warning
this is warning to all .
I have flash the rom successful with latest TWRP .
clean flash.
bootloop at samsung logo. So I think why not dirty flash it over cm12.1 so i try and it booted successfully the bugs are the one which known.
then I make reset option in the setting to make it as clean as possible it end with bootloop at twrp logo.
please forkbomb any suggestion .
Note: I restore my phone with odin flash stuck rom.
important note : I have found my internal sd card formatted whyyyyyy???.:crying:
Thanks for the release any way.:good:
Hi, you SD internal was format Because you have flash your stock with odin
Thank u for bringing this up. I'll be waiting for a stable version though, but still very happy to see the news.
Hi,
I did factory reset installed the rom and gapps pico.
I got into endless loop of Galaxy i9300 logo.
Any clue what I did wrong?