Database Develop

Please Help... Regarding not receiving or makings calls on Sipgate, GV, SS

I need someone's help real bad!!!!!!!!!!!!!!!
here is the scenario:
1. I got everything work just fine with this VOIP phone with Sipgate, Google Voice & Sipsorcery... I got everything working and receiving incoming & outgoing calls with no problems at all.. using Sipdroid as my ATA on my T-Mobile G1
2. now today after like a month when i getting ready to make a outbound call to a store it gives me a beeping noise that replaces the ringer then it never connects and hangs up.
3. now i never changed the settings on sipgate nor did I change the settings on sipsorcery...
4. I never had a problem til today and now i cant receive nor make calls.
5. So i went to sipgate and tried to dial out it said "Error 200 3" or with the pop up messages on the bottom right while signed into sipgate it had a message at the bottom saying "Line 1 Busy".
6. Since then i went into sipgate and erased everything also i did the same in sipsorcery and it didnt change the problem...
7. All im trying to do is make calls again without hearing this beep sound that replaces the ringer and making and receiving calls again...
Can Anyone please help me???? I really need it lol, i am frustrated to the max with this.

68 views and no answer?
come on, yall know how to make app for phones and all i am asking on how to correct a problem...
do anyone have a answer?

Anybody have problems receiving calls with 2.2?

Upgrade to 2.2 with radio, but I am having a weird problem. Phone shows I am registered on ATT, and can make calls, receive texts and send texts, however receiveng calls is sporadic. Most of the time the phone does not show an incoming call. I find if I go to the settings menu and re-register on ATT I can receive a call or two, but then it stops. As I said however I can always make calls and send/receive texts. It always shows good signal and edge connection. Any Idea where to start troubleshooting.
What I have done:
Disable google voice in case this was causing problems.
Nand restore back to Cyanogen and flash old radio - Everything works

YES!!! I was having this crazy problem with receiving call also! In fact that's what I was searching for when I found your post.
My receiving calls were very sporadic... and the incoming calls would NEVER ring! I would see the incoming call on my display... but I would get NO sound, even with the sound rockers turned all the way up!
I went back to Cyan's ROM cause it was totally unacceptable.

In call sound problem

I have in call sound problems.
When I reboot I can sometimes place one call without problems for as long as I want.
Other calls after that I have no sound, can't hear the call tone and other parties can't hear me.
Also incoming calls, i hear the phone ring but when i answer the other party can't hear me and i can't hear the other party.
The settings for sounds in the accessibility menu and noise reduction etc were off and stayed off. (other forum tips)
I also tried numerous factory resets with no avail
Can someone give me a hint how to fix it?
I have stock 4.2.2 International version of the S4 Active.
Baseband I9295XXUBMK2
Build JDQ39.I9295XXUBMK2
Kernel 3.4.0-2015525

Headset
I tried a different option. I can call with my bluetooth headset.
When i switch to speaker the in call sound drops. giong back to headset will not activate in call sound.

Same Here
The same happens to me. Only the bluetooth option works every time. I have tried several firmware and kernel versions and nothing has changed.
There is a workaround that I could find but it is totally impractical: http://forum.xda-developers.com/showthread.php?t=2371034
In forums for models / ROMs with a lot more users than this one (Nexus / CM) people with 4.2.2-based firmware versions there are many posts describing what could seems to be the exact same problem, which they have been able to fix via baseband updates or custom patches, but that does not really seems to be an option for the S4 Active...

mobieletelefoons said:
I have in call sound problems.
When I reboot I can sometimes place one call without problems for as long as I want.
Other calls after that I have no sound, can't hear the call tone and other parties can't hear me.
Also incoming calls, i hear the phone ring but when i answer the other party can't hear me and i can't hear the other party.
The settings for sounds in the accessibility menu and noise reduction etc were off and stayed off. (other forum tips)
I also tried numerous factory resets with no avail
Can someone give me a hint how to fix it?
I have stock 4.2.2 International version of the S4 Active.
Baseband I9295XXUBMK2
Build JDQ39.I9295XXUBMK2
Kernel 3.4.0-2015525
Click to expand...
Click to collapse
I to have the same problem but im on a I537! This is the second replacement device from ATT! Have noticed i can call out fine when someone calls no audio nor can they hear me,call back and it works fine.Also have noticed when a call is incoming or outgoing LTE will switch to 4G. My 1st I537 never did this!

davenger1 said:
I to have the same problem but im on a I537! This is the second replacement device from ATT! Have noticed i can call out fine when someone calls no audio nor can they hear me,call back and it works fine.Also have noticed when a call is incoming or outgoing LTE will switch to 4G. My 1st I537 never did this!
Click to expand...
Click to collapse
Same problem with my SGS4A. I was on i9295XXUBMK2, tried to update using the phone update option, which rendered my phone unusable. Flashed new stock ROM i9295XXUBMK3, now I can use the phone, although sound problem persists.
Making a call: reboot, call
Receiving a call: answer, hang-up, reboot, call back
Anyone with 4.3 that has this problem on SGS3, SGS4 or SGS4A?
Edit 21.8.2014
I had the speaker changed last week and so far no problems. I am slowly getting confident that I can rely on S4A as a phone also, not just tiny surf tablet.

I have same phone, never got this pb. However I got some SD card issues after updating to KitKat...

Partial solution... for me at least
Hi guys ,
having same issue, disabling 4G option solves my problem. But it-s impractic cause I want to use the 4g... in a huawei phone I solved same issue by disabling an option of "mobile data always on"
Don't know how it's related...

Same issue for me. I made lots of research with no results. Nobody knows...

same problem here with no solution yet
mobieletelefoons said:
I have in call sound problems.
When I reboot I can sometimes place one call without problems for as long as I want.
Other calls after that I have no sound, can't hear the call tone and other parties can't hear me.
Also incoming calls, i hear the phone ring but when i answer the other party can't hear me and i can't hear the other party.
The settings for sounds in the accessibility menu and noise reduction etc were off and stayed off. (other forum tips)
I also tried numerous factory resets with no avail
Can someone give me a hint how to fix it?
I have stock 4.2.2 International version of the S4 Active.
Baseband I9295XXUBMK2
Build JDQ39.I9295XXUBMK2
Kernel 3.4.0-2015525
Click to expand...
Click to collapse
same problem with in call and out call .... searched a lot about solution and no solution yet

I had a similar issue with bluetooth calls. First call would be fine, but after that I couldn't hear the other person on the line and they couldn't hear me. It turned out to be some kind of incompatibility with the Google "OK Google" detection with Galaxy S4-based phones. If I disabled it from detecting "From any screen", this seemed to correct the problem. However the setting might return on application updates. I would recommend trying that and see if it makes a difference. If it's not that, then I don't really know how to help you. I moved on from that phone over a year ago and have been happier ever since.

No Voice After Picking Up Incoming Call

I've had my HTC M8 H/K edition on Sprint 1 week now. I dont get a lot of calls, but I just realized my phone has a problem answering calls. The phone rings. When I answer the call, it picks up, and then there's just silence. No audio in or out. The caller hears nothing; I hear nothing. There is no problem when i make outgoing calls, just answering incoming calls. Anyone else heard of this issue?
I should add. Stock Rom, Unlocked Bootloader, Root, S-On

Here's an update -- It seems to be a problem with Google Voice. I read in another post that google talk installed on a PC might contribute to the problem as it is delivering the call to the app first. I removed google voice from my phone, and then reboot. Issue is gone, we'll see what happens when i reinstall google voice.

tetracw said:
I've had my HTC M8 H/K edition on Sprint 1 week now. I dont get a lot of calls, but I just realized my phone has a problem answering calls. The phone rings. When I answer the call, it picks up, and then there's just silence. No audio in or out. The caller hears nothing; I hear nothing. There is no problem when i make outgoing calls, just answering incoming calls. Anyone else heard of this issue?
I should add. Stock Rom, Unlocked Bootloader, Root, S-On
Click to expand...
Click to collapse
Same here with me...
what should be done..
?

I uninstalled google voice for now.

So I narrowed down the issue a bit further. It has to do with whether or not I'm on LTE. I still think Google voice might be interfering. But something is different with how the call is delivered when i'm on LTE. When I set my phone to CDMA only, the call rings, i answer it and everything is fine. When i turn back on LTE. The call rings, i answer it and it's dead air. No voice in or out. Really weird.
Other things I've tried. Wifi Off/On, no difference. Signed out of my google/gvoice accounts. I also disabled the feature to deliver calls to Google talk/hangouts. Maybe it takes a while for the settings to take effect.

I have the same issue completely stock HTC one with latest OTA updates and Google Voice I can only receive phone calls when I am on CDMA doesnt work on WIFI or 4G.

[Q] Drive not announcing incoming call but missed call

Hello,
wife's Moto X is connected to older VW bluetooth which only let's you dial through the phone or pick up incoming calls. That was the reason I got her the Moto x, so the drive assist would announce calls and she could place calls hands free. However, when a call comes in, it just rings, no announcement. When the call is not picked up, the phone then says "missed call from xxx". So drive is working somehow but not all the way. And when the "missed call from xxx" announcement is being spoken (and the screen goes black with the red microphone circle), the phone doesnt react to any voice input.
I upgrade and downgraded the assist app, didnt make any changes. I'm using the "having issues with bluetooth - other audio" option.
Any idea? Thanks a lot!

Have you been into the settings of assist and checked the boxes of the actions you want when you are driving? Also, is your GPS in high accuracy?

lowvolt1 said:
Have you been into the settings of assist and checked the boxes of the actions you want when you are driving? Also, is your GPS in high accuracy?
Click to expand...
Click to collapse
yes and yes. Drive assist shows up as symbol in the notification bar. And it runs because missed calls are being announced, just not incoming one's. Wife has replace the stock dialer, not sure if that makes a difference, because when I disabled it it was doing the same.

Try this: How to reset Motorola Assist

Thanks. I forgot to mention that I tried to clear cache etc. But reading through the comments from the link above, there are a lot of people having the same issue. I think I'll wait and see if the coming L update will fix things. Sounds like 4.4.4 update broke it for some. And I don't have much time fussing with the phone and car at the same time since it's not mine. But as of now, Assist seems useless and I could just use Google Now for the same functionality.