Hello,
with me under MCU Version: 201512301016-LM6
I find on the net but nothing on the MCU or know about an update.
aslo software update I have the file get from my manufacturer: sdupdate-b0224gwq16c-m6
there is an app to the MCU read?
Is there a possibility umzuflashen the radio?
I had already installed a MTCB update_4_4_4_FUSE_1024X600_RK3188_17_MAL_23_04_2016.
Unfortunately everything was mirrored and I could not push the toutch.
my problem is, unfortunately, I have everything in Chinese and no google play etc have installed or can install.
a google account I can not only set up a QQ where everything is in Chinese.
the android I can switch to German unfortunately the apps all in Chinese
Related
What is the latest official firmware for the Samsung Gear Live?
I've been searching all over these forums for the Samsung gear live, and all over the internet also. I just bought a gear live off of Amazon for $100 and it's supposedly new. It currently has:
Software version: 5.0.1
Build Number: sprat-userdebug 5.0.1 LWX48P 1627902 dev-keys
Android Wear: 1.0.5.1627902
Google Play Services: 6.5.90 (1610726-534)
1) Is this the latest firmware?
2) Is this official firmware? Developer Firmware?
3) Will I get Updates on device? (Says up to date currently on the watch when I try to update on the watch)
Thank you so much for any help you can give me!
If you didn't figure out till now then read below
No this is not the latest firmware
The latest is 5.1.1
Connect the watch to your smartphone and then check for update on your watch(your phone should have internet connection)
You may need to use the gear live restore tool to change to non dev firmware (read the thread, don't use the latest version of tool)
Current:
Wear: 1.3.0.2160025
Play services: 8.3.01 (2385995-534)
Os: 5.1.1
LCA43
Thank you so much guys for all your posts. I used version 2 of the Samsung Gear Live Restore Tool to flash my watch back to stock settings, then used the normal updates via OTA on the watch.
I used the download link and the video from this post:
http://forum.xda-developers.com/gear-live/development/utility-gear-live-watch-tool-t2846696
The video was step by step and super easy to follow ( Thanks Tom! )
I was in the same exact boat. $100 new from Amazon and had the same exact Software version, Build Number, Android Wear, and Google Play Services as the original poster. Went through the same steps, however I had to fight my computer a bit on the drivers.
In case this helps anyone else: I'm on Win7 64-bit. The first hurdle was getting a microUSB cable that worked (the USB multi-dongle I was trying to use turned out to be crap). Until I got a better cable, the Gear Live was not getting recognized by my computer at all. When it finally did, the drivers weren't getting set up correctly. I went to Device Manager, found the unknown device, right clicked and hit Update Driver Software (see about the 5:30 mark in Tom's video). I had two problems here:
1) My computer initially recognized the device as "Android Composite ADB Interface". That doesn't seem to work, make sure sure it's just "Android ADB Interface", NOT Composite. When I ran the driver check in the Gear Live tool, the device was now finally showing up for the ADB check.
2) But it wasn't showing up for the Fastboot check. To fix that, I had to GO BACK INTO DEVICE MANAGER after the ADB check, while the watch was in bootloader mode, find Android Device (or something like that, I forget what it was called), and again hit Update Driver Software and select the Android ADB Interface again. Once I did that, everything else in the video and Gear Live tool worked flawlessly.
I also wound up restoring the Gear Live watch to stock (option 6 in the tool), and it's downloading the OTA software update now. I'll post here if I hit any other snags.
Thanks again for posting this. Definitely helped me out.
EDIT: Note that if you go the OTA route, you're going to have to do multiple updates to get from the stock version up to the most current version. For example, stock starts out at 4.4W. It won't update from that all the way up to 5.1.1 in one shot. It'll do it in increments and take 3 or 4 updates. A little time-consuming, but otherwise I've had no further issues.
ROM History: http://forum.xda-developers.com/wiki/Samsung_Gear_Live
EDIT: Updating finished, here's the result:
-- Build Number LCA43
-- Android Wear 1.3.0.2160025
-- Google Play services 8.4.89 (2428711-534)
-- Android OS 5.1.1
I've never used my mac to do anything like this. What program do I need to open the gear live tool in, it's a .sh file and just opens in notepad. Thanks
would this lack of OTA updating ability cause the basic programs (Maps, google play music, etc.) not to work? Why is Samsung completely oblivious to this issue?
I have the sprat-userdebug 5.0.1. I'll be using this thread to fix it, I hope. But I cant get most of my apps to work on the watch. Hoping this will resolve it.
Thanks.
OTA now provided to convert from dev-keys to release keys
Today we are rolling out an OTA update to "sprat" Android Wear devices from Samsung that were stuck on a very old LWX48P firmware and old Google Play Services. These devices were sold with a non-standard "dev-keys" firmware, whereas normally devices use "release keys" firmware. dev-keys devices do not receive updates for anything. We have added a special OTA update that converts the LWX48P devices from dev-keys to the proper release keys LWX48P, and that will then allow the OTA update system to bring the watch completely up to date.
For users, it will take a few days for the update to be made available to everyone. After applying the update, you will need to factory reset and pair the watch up again, and then it will apply the latest updates that were previously skipped.
For developers, you will need to wait for users to apply the update and then you should see a drop in the number of old sprat devices showing dev-keys and old versions of Google Play Services. With this update, any user will have an easy to use path to get back to receiving regular updates.
See more discussion about this in my G+ posting ... plus.google.com/+WaynePiekarski/posts/izipAZnd56C
Hello, I have a Meizu m2 note of Chinese operator type "U" version I bought it in February of 2016 via internet by aliesprex, although it is not the version that I requested in your page. I do not usually use all the applications that a smartphone brings today. I remember that by initializing it I could not create My Flyme account because I demanded a Chinese phone, so I left it without account. The case is that today is the day I find it annoying that only applications open only connect to the browser, etc., despite the fact that it only uses few applications like the camera, the wasap to download and some other. I have been browsing the internet and it is said that rooteando android can be changed to global or international, my version of android is 5.1 and compile number: Flyme OS 4.5.3U. I've routed it and wanted to install the superSU version 2.46 but this is a broken wait and then the error message comes out.
If anyone can help me, please thank me.
Hello,
I've purchased a Global ROM LLD-AL10 version of Honor 9 Lite. Initially i I had a trouble with syncing contacts only from my Google account (all other google services worked fine for me) so I decided to try and install the system update. The update was to version LLD-AL10 8.0.0.143(C00). After the update all Google services stopped working for me and I couldn't login to my Google account in the system settings. I tried to do a reset to factory defaults, but that didn't helped with anything. It seems that I've installed a Chinese ROM - many apps have Chinese name and Google services are blocked. Any idea how can I get the previous version? Or any version whatsoever that is working with Google services?
SftgqTGn said:
Hello,
I've purchased a Global ROM LLD-AL10 version of Honor 9 Lite. Initially i I had a trouble with syncing contacts only from my Google account (all other google services worked fine for me) so I decided to try and install the system update. The update was to version LLD-AL10 8.0.0.143(C00). After the update all Google services stopped working for me and I couldn't login to my Google account in the system settings. I tried to do a reset to factory defaults, but that didn't helped with anything. It seems that I've installed a Chinese ROM - many apps have Chinese name and Google services are blocked. Any idea how can I get the previous version? Or any version whatsoever that is working with Google services?
Click to expand...
Click to collapse
i have the same problem i cant open my google account but i have the last update 8.0.0.183(c00patch01)
Hello I bought ten Chinese 2din android radio sim 8802 and have a problem I don't receive rds on the radio transmitter.
And I have read about rds enable in factory settings but I can't find rds enable and radio settings.
Mij android version is android 7.1 model number g20.
has somebody find a fix or an idea how to fix this problem.
thanx already
I have the some problem . Do You have fixed it?
But are there any person that can response at these questions ?:crying::crying::crying::crying:
Hey,
I bought a Nokia 7 Plus TA-1062 from China. After it arrived I installed the global android version using the instructions provider here. I then side loaded a 8.1.0 version with Security path from 1st of August. The phone is functioning fine in terms of ability to browse web/take calls/use camera/etc. - HOWEVER - during any of these updates I wasn't able to use any of Google's services (Play Store/Cloud login/Updates). It's just stuck on 'Checking info...' and sometimes notifies it wasn't able to connect.
When I look at the Google Play Services logs (using the *#*#426#*#* code) I see that the connection is failing constantly. I've tried reseting the cache/data of all related apps and the phone itself without help.
Anyone knows how to solve this? Why are the Google Play Services not working?
bob2016_123 said:
Hey,
I bought a Nokia 7 Plus TA-1062 from China. After it arrived I installed the global android version using the instructions provider here. I then side loaded a 8.1.0 version with Security path from 1st of August. The phone is functioning fine in terms of ability to browse web/take calls/use camera/etc. - HOWEVER - during any of these updates I wasn't able to use any of Google's services (Play Store/Cloud login/Updates). It's just stuck on 'Checking info...' and sometimes notifies it wasn't able to connect.
When I look at the Google Play Services logs (using the *#*#426#*#* code) I see that the connection is failing constantly. I've tried reseting the cache/data of all related apps and the phone itself without help.
Anyone knows how to solve this? Why are the Google Play Services not working?
Click to expand...
Click to collapse
I am also the Chinese version of Nokia 7plus, also found this problem, the message can not be pushed!
flashing gapps would solve the problem if you have a recovery installed, but since we cannot unlock our bootloader, you're ****ed
Sowa96 said:
flashing gapps would solve the problem if you have a recovery installed, but since we cannot unlock our bootloader, you're ****ed
Click to expand...
Click to collapse
Thanks for replying - I'm new to all this and would like to learn more -
1. What does it mean to have "recovery installed"? I'm able to enter the recovery console on boot via the power button+up volume key trick (that's how I sideloaded the 8.1 version), I'm guessing that's not it?
2. What does it mean to unlock the bootloader? how do you know if your bootloader is locked or not?
3. and probably most important - how do you flash gapps?? That's something that I'd like to try, maybe my phone is already unlocked by some sheer luck (doubt it since it came in a sealed box)
bob2016_123 said:
Hey,
I bought a Nokia 7 Plus TA-1062 from China. After it arrived I installed the global android version using the instructions provider here. I then side loaded a 8.1.0 version with Security path from 1st of August. The phone is functioning fine in terms of ability to browse web/take calls/use camera/etc. - HOWEVER - during any of these updates I wasn't able to use any of Google's services (Play Store/Cloud login/Updates). It's just stuck on 'Checking info...' and sometimes notifies it wasn't able to connect.
When I look at the Google Play Services logs (using the *#*#426#*#* code) I see that the connection is failing constantly. I've tried reseting the cache/data of all related apps and the phone itself without help.
Anyone knows how to solve this? Why are the Google Play Services not working?
Click to expand...
Click to collapse
Hello, i have this 1062 chineses with global ROM too, this code to Google services log work to me but the problem im facing now its only"device uncertified" and NFC dont work, also OTA dont work, OTA Gave me updates until May, after this i did updates until Aug by SD