Database Develop

[ROM][4.4 Kit Kat] I9505GUEUBMKG [STOCK] Rooted

[ROM] 4.4 I9505GUEUBMKG [STOCK] Rooted for the Google Edition Galaxy S IV ONLY.
[ PLEASE DO NOT ASK OR PM ME ABOUT PORTING THIS OR FLASHING THIS TO ANY OTHER PHONE BUT THE I9505G ]
This is 100% stock I9505GUEUBMKG 4.4 Kit Kat. Nothing special here. We are currently experiencing a few bugs flashing this so in order for me to start building Kit Kat I would like to start from scratch and get good feedback. [ Please PM me any Logcats ] post bugs as reported in the this thread.
I am working on adding more features to this ROM like the Google Experience Launcher, and much more please be patient with this as well as any other project.
Thanks to : @SamuriHL for his Odin Firmware package and @occupational_hazard for testing and support.
[ As with any Custom ROM or Modification to your Phone I nor anyone on this forum or XDA is responsible if you brick your phone, lose your job, wife, ect.. or life as we know it ends. You assume all the risks by flashing this or any other custom ROM to your phone. Please read the instructions carefully and make sure you fully understand what you are doing before you do it. If you cannot figure it out use the search button and read, if your still having problems ask someone. We are here to help.]
INSTRUCTIONS
FIRMWARE
1. It is best to update your firmware before you flash this ROM. Due to the secure bootloader we cannot flash modems. Please see this THREAD to update your modem to MKG. You can also Odin to stock with SamuriHL 4.4 Odin firmware package which is HERE. This is the exact same thing, all I did was unpack his image and make it into a ROM to flash via Custom Recovery.
[ THIS IS BETA UNTIL I CAN CONFIRM CALLS AND MEDIA WORK AS WAS REPORTED THEY DID NOT. PLEASE DO A BACKUP FLASH AND REPORT BACK]
DOWNLOAD [ROM] HERE
1. Boot into TWRP ( Recommended )
2. Do a Nandroid Backup
3. Wipe Data, Cache, and Dalvik
4. Install ROM
5. Reboot ( Update Root in Google Play )
If you experience any Bootloops please boot back into TWRP and Wipe Cache and Dalvik one more time then fix permissions then reboot.
HOW TO SAY THANK YOU?
1. Press THANKS
2. Helpful Comments
3. Get Involved
4. Press DONATE

Reserved
Sent from my Nexus 5 using Tapatalk

@MJHawaii
Are you now on this rom??
We need help! We're trying to fix the GE 4.4 rom on the 9505 S4 but we need files that someone has to pull from the rom itself, not the OTA. Could you send ktoonsez the files? Or somebody else?
http://forum.xda-developers.com/showthread.php?p=47954764
Please help.
Gesendet von meinem SGH-M919 mit Tapatalk

iamnotkurtcobain said:
@MJHawaii
Are you now on this rom??
We need help! We're trying to fix the GE 4.4 rom on the 9505 S4 but we need files that someone has to pull from the rom itself, not the OTA. Could you send ktoonsez the files? Or somebody else?
http://forum.xda-developers.com/showthread.php?p=47954764
Please help.
Gesendet von meinem SGH-M919 mit Tapatalk
Click to expand...
Click to collapse
This ROM is from the OTA that was pushed out and then it was put into an Odin package which I unpacked and created. I read ktoonsez thread and I don't think this is what he is looking for but feel free to pull it if you like.
Sent from my Nexus 5 using Tapatalk

MJHawaii said:
This ROM is from the OTA that was pushed out and then it was put into an Odin package which I unpacked and created. I read ktoonsez thread and I don't think this is what he is looking for but feel free to pull it if you like.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I think we actually need it pulled from you're phone mjhawaii

MJHawaii said:
This ROM is from the OTA that was pushed out and then it was put into an Odin package which I unpacked and created. I read ktoonsez thread and I don't think this is what he is looking for but feel free to pull it if you like.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Do you have GE 4.4 on your S4? Can you check if you have those files?
Gesendet von meinem SGH-M919 mit Tapatalk

iamnotkurtcobain said:
Do you have GE 4.4 on your S4? Can you check if you have those files?
Gesendet von meinem SGH-M919 mit Tapatalk
Click to expand...
Click to collapse
grab /firmware/image/keymaster.* files. If they're not there check /system/vendor/firmware

Danvdh said:
I think we actually need it pulled from you're phone mjhawaii
Click to expand...
Click to collapse
Id be more than happy too but that phone is sold and I'm on an N5 so we have to pull it from someone else
Sent from my Nexus 5 using Tapatalk

Danvdh said:
grab /firmware/image/keymaster.* files. If they're not there check /system/vendor/firmware
Click to expand...
Click to collapse
I'm going to have my old phone back this weekend I can pull the files for you then if not sooner unless someone else volunteers
Sent from my Nexus 5 using Tapatalk

Anyone having any issues flashing this? So far I have one report of calls and media not working
Sent from my Nexus 5 using Tapatalk

The difference between this Rom Stock 4.4 I9505GUEUCMKG the other rom stock 4.4 I9505GUEUBMKG ? Thanks

volamtruyenky said:
The difference between this Rom Stock 4.4 I9505GUEUCMKG the other rom stock 4.4 I9505GUEUBMKG ? Thanks
Click to expand...
Click to collapse
Read the OP for your answer its in there
Sent from my Nexus 5 using Tapatalk

Hey MJ, does this flash the modems, as well? I didn't know if that was possible in custom recovery and I didn't see it mentioned either way in the OP. Sorry if this is a stupid question.
UPDATE: I downloaded it and took a look. Just system and boot for the curious. Very neat!

SamuriHL said:
Hey MJ, does this flash the modems, as well? I didn't know if that was possible in custom recovery and I didn't see it mentioned either way in the OP. Sorry if this is a stupid question.
UPDATE: I downloaded it and took a look. Just system and boot for the curious. Very neat!
Click to expand...
Click to collapse
We cannot flash modems in custom recovery due to the secure boot loader. This is unpacked MKG just in ROM for flashing ..system, boot.
BTW can you verify this works without any issues I got one bug report calls and media did not work which is strange because this is not modified
Sent from my Nexus 5 using Tapatalk

I'm going to reflash and try again. If it happens again , I'll try to get you a logcat
Sent from my GT-I9505G using Tapatalk

occupational_hazard said:
I'm going to reflash and try again. If it happens again , I'll try to get you a logcat
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
Can you install the Google Experience Launcher for me here http://www.androidfilehost.com/?fid=23212708291676903 then go into adb and do adb pull system/ then upload for me and pm a link if it is working well.
Sent from my Nexus 5 using Tapatalk

Anyone having any issues with this I am working on another ROM that will have the GE experience launcher with some other mods and I want to handle any other issues as well
Sent from my Nexus 5 using Tapatalk

What's default frequently cpu when screen turn on? I was using Google edition 4.4 on international but it working with high freq about 1520 MHz when only screen on.
Wysłane z mojego GT-I9505 przy użyciu Tapatalka

I can't get sound to work for the life of me after flashing this. I've tried re-flashing, wiping, and the usual. Everything else seems to work. Data, WiFi, GPS, BT, no FC's except for phone app... Everything seems to work except for outgoing/incoming sound so my phone doesn't work as a phone.
Any suggestions? //I can submit logs & screenshots if wanted.

fourinthoughts said:
I can't get sound to work for the life of me after flashing this. I've tried re-flashing, wiping, and the usual. Everything else seems to work. Data, WiFi, GPS, BT, no FC's except for phone app... Everything seems to work except for outgoing/incoming sound so my phone doesn't work as a phone.
Any suggestions? //I can submit logs & screenshots if wanted.
Click to expand...
Click to collapse
Same here, but I have an I9505 (edited the updater-script and added a custom kernel).

[Info] Official CM 11 Builds Started For All Nexus (with screenies) ART Working

Hello all,
This friday is really a kitkat day.
First of all stock 4.4.1 released
Then came AOSP 4.4.1
And now what
Official CM 11 project downloads
Thanks god finally cm users have to cheer abt today
Check out get.cm now for download links
On 5th dec, We have the first official build for cm 11
cm-11-20131205-SNAPSHOT-M1-mako.zip

ravinder0003 said:
Hello all,
This friday is really a kitkat day.
First of all stock 4.4.1 released
Then came AOSP 4.4.1
And now what
Official CM 11 project downloads
Thanks god finally cm users have to chear abt today
Check out get.cm now for download links
On 5th dec, We have the second nightly
cm-11-20131205-SNAPSHOT-M1-mako.zip
Click to expand...
Click to collapse
You mean CHEER right? LOL. just kidding.
Surely a good news for all of us. :good:

Rohit02 said:
You mean CHEER right? LOL. just kidding.
Surely a good news for all of us. :good:
Click to expand...
Click to collapse
Yaaa bro ... I was waiting for cm 11 for a long ...
Finally feeling proud to be a nexus owner.

Just flashed CM11 an hour ago. There's still a few things not translated properly, but those are very minor flaws. It's fast and smooth. Now i'm waiting for the Themes to be updated, so I can get my favorite look back
Gesendet von meinem Nexus 4 mit Tapatalk

Is there an updated gapps for cm11? The play store is broken and the keyboard keeps crashing. Could be because I dirty flashed though.
Sent from my Nexus 4 using Tapatalk

[email protected] said:
Is there an updated gapps for cm11? The play store is broken and the keyboard keeps crashing. Could be because I dirty flashed though.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
have you try this http://wiki.cyanogenmod.org/w/Gapps ?

[email protected] said:
Is there an updated gapps for cm11? The play store is broken and the keyboard keeps crashing. Could be because I dirty flashed though.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Haven't tried gapps but keyboard and all other stuff works buttery smooth
Some of the 10.2 Features are missing but its a simple and smooth one
Find the screenies

15 minutes in Bootloop already.......flashed this via CM Updater over 10.2.0.
So i have copied the Zip file (196.54 MB) from PC into the CM Folder on my Mako.
Any suggestions?

I know its not necessary but I have installed the latest bootloader: makoz30d and baseband: radio-mako-m9615a-cefwmazm-2.0.1700.97 on Nexus 4. Are they supported and will that boost performance ? Flashed through TWRP 6.3.3 and wiped system, dalvik and cache but not data. Everything is working rock solid till now. Thanks.

Puneet Singh Chauhan said:
I know its not necessary but I have installed the latest bootloader: makoz30d and baseband: radio-mako-m9615a-cefwmazm-2.0.1700.97 on Nexus 4. Are they supported and will that boost performance ? Flashed through TWRP 6.3.3 and wiped system, dalvik and cache but not data. Everything is working rock solid till now. Thanks.
Click to expand...
Click to collapse
Where can i download the latest Bootloader and Baseband for Mako?
Tnx

RayGarden said:
Where can i download the latest Bootloader and Baseband for Mako?
Tnx
Click to expand...
Click to collapse
Radio
Bootloader

Where we can download the g.apps for this rom?
Sent from my w500 using XDA Premium 4 mobile app

The CyanogenMod Wiki has a page dedicated for Gapps, you can find a link there.
Gesendet von meinem Nexus 4 mit Tapatalk

boyarenola said:
Where we can download the g.apps for this rom?
Sent from my w500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Go just one page back

varben said:
Go just one page back
Click to expand...
Click to collapse
link is down, have tried all morning to download GAPPS for cm11, clockworkmod site wont even load...

install failed with TWRP...why?

xtrymind said:
have you try this http://wiki.cyanogenmod.org/w/Gapps ?
Click to expand...
Click to collapse
Derp. Thanks that's what I get for trying to play with a new build so late at night.
I actually found and installed the PA gapps package and that helped immensely. The only other thing I've had to do was uninstall/reinstall Google voice. Before I did that the phone was running hot (something was keeping the CPU awake). Seems to be running okay now though.
Sent from my Nexus 4 using Tapatalk
---------- Post added at 12:18 PM ---------- Previous post was at 12:15 PM ----------
varben said:
Radio
Bootloader
Click to expand...
Click to collapse
I reserve the right to be wrong but I think the baseband and boot loader didn't change from 4.3 to 4.4. At least my handset already had the versions that ate shipping in the factory 4.4 image package.
Sent from my Nexus 4 using Tapatalk

[email protected] said:
Derp. Thanks that's what I get for trying to play with a new build so late at night.
I actually found and installed the PA gapps package and that helped immensely. The only other thing I've had to do was uninstall/reinstall Google voice. Before I did that the phone was running hot (something was keeping the CPU awake). Seems to be running okay now though.
Sent from my Nexus 4 using Tapatalk
---------- Post added at 12:18 PM ---------- Previous post was at 12:15 PM ----------
I reserve the right to be wrong but I think the baseband and boot loader didn't change from 4.3 to 4.4. At least my handset already had the versions that ate shipping in the factory 4.4 image package.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Yes they did change
Sent from my Nexus 4 using xda app-developers app

varben said:
Radio
Bootloader
Click to expand...
Click to collapse
Thanks.......:good:
In the meantime i have done a full wipe and installed the ROM. Then i missed the Gapps so downloadeed them too. Re-installed everything and now it's running fluently.
No bugs recognized ... yet.
Question; is the new Radio and Bootloader really necessary?
Thanks in advance...

varben said:
Yes they did change
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
well I'm 2 for 2 on the migration to CM11
I would say modem / bootloader upgrades are recommended based on how poor my handset worked as a phone today...
EDIT: I figured out why I missed the bootloader / modem update. I downloaded the factory image and unpacked it, then looked at the file names. The files usually reflect the version but in this case they are still named after the 4.3 versions and not the 4.4 versions. After flashing anyway KRT16S gives me bootloader MAK0Z30d and modem .97

[Q] CyanogenMod On Xperia Z

I'm A New User And I Was Wondering How To Install CyanogenMod On My Xperia Z.
I Have Already Unlocked My Bootloader.. Can Someone Teach Or Post A Page To Show Me How To Install The CM Boot.img ?
Thanks

Tan Zheng Xun said:
I'm A New User And I Was Wondering How To Install CyanogenMod On My Xperia Z.
I Have Already Unlocked My Bootloader.. Can Someone Teach Or Post A Page To Show Me How To Install The CM Boot.img ?
Thanks
Click to expand...
Click to collapse
When I did it, I unlocked the bootloader, rooted it and put CM+Gapps zip on the internal SD Card. Then I wiped the cache and just flashed the zips. No fuss.
If you google it, there are quite a few guides on it, that's how I found the information to help me, anyways.

But I Thought I Need To Flash The Boot.img Of CM Using Fastboot Before I Can Install ? Is That Step Optional Or A Must Do ?
Sent from my C6603 using xda app-developers app

Tan Zheng Xun said:
But I Thought I Need To Flash The Boot.img Of CM Using Fastboot Before I Can Install ? Is That Step Optional Or A Must Do ?
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
CM install guide - http://wiki.cyanogenmod.org/w/Install_CM_for_yuga
Questions belong in the Q&A section!

Is it true that i get loss in camara quality with Cy mob?

Yes. For me this is the biggest fault in CM. The Stock camera is way!!!!!!! Better than all of its pendants from the market or Cm itself. And no FM Radio in CM.
Gesendet von meinem SGP321 mit Tapatalk 4

Advanced Stock kernel (TWRP) & root for unlocked bootloader

Hello everyone,
I present to you an advanced stock kernel with TWRP recovery for Z3 Tablet compact.
== Project status ==
Working:
- Recovery
- Stock rom
- Full root
- everything that's not in the "not working list"
== Download ==
- kernel: Xperia Z3 Tablet Compact Advanced Stock kernel
== Installation instructions: ==
- flash boot.img using fastboot
Don't try this when you don't know what you are doing!!
== Rooting: ==
- Enter recovery
- Choose to install SuperSU when rebooting to stock rom
- Click on notification about SuperSU installer
- Use TWRP as installation method
- SuperSu will automatically be installed
== Changelog ==
Code:
[QUOTE][B]== v1.0 ==[/B]
- Stock 23.0.1.A.0.167 fw[/QUOTE]
XDA:DevDB Information
Advanced Stock kernel (TWRP) & root for unlocked bootloader, Kernel for the Sony Xperia Z3 Tablet Compact
Contributors
krabappel2548
Kernel Special Features:
Version Information
Status: Stable
Created 2014-12-02
Last Updated 2014-12-02

Does this kernel work for all 3 flavours of the z3 compact tablet? I am asking is as I read that you are developing with the wifi only version while I have the lte (SGP621) version.

pietr0 said:
Does this kernel work for all 3 flavours of the z3 compact tablet? I am asking is as I read that you are developing with the wifi only version while I have the lte (SGP621) version.
Click to expand...
Click to collapse
I'm not sure, I don't know what the differences in kernel, but I don't think they have a lot of differences and probably it should work
Sent from my C6903 using XDA Free mobile app

Great!
krabappel2548, great work men! :good:
Very nice
Do you also know if the bootloader is still intact?
I ask this because the algorithms for noise reduction, Mira Cast and better pictures in lower light are protected by DRM and the process of unlocking the bootloader removes it from the software.
So basicly if the bootloader was unlocked we should also loose the named algorithms .
And you could loose waranty if you have to bring it back to the store for problems.
Of course not for Root/Custom ROM issues: That is still the responsibiliy of every user
Edit: Did you know that you could earn money? They reward people who can root the Xperia Z3. For details see http://forum.xda-developers.com/z3-compact/general/bounty-root-unlocking-bootloader-method-t2940539
krabappel2548 said:
I'm not sure, I don't know what the differences in kernel, but I don't think they have a lot of differences and probably it should work
Sent from my C6903 using XDA Free mobile app
Click to expand...
Click to collapse

I have installed the kernel and TWRP works fine.
The kernel seems to be the same as stock. The only difference I have found is that /system is rw from boot. If I
Code:
mount -o ro,remount /system
it becomes read only as expected. After this it is not possible to mount rw again (Operation not permitted) which is the same as stock.

Is it for UB only?
Sent from my A0001 using XDA Premium HD app

mcrane1981 said:
Is it for UB only?
Sent from my A0001 using XDA Premium HD app
Click to expand...
Click to collapse
Yes, read the thread title.

I've flashed the kernel in fastboot, how do I then install superSU??

sonnylumley said:
I've flashed the kernel in fastboot, how do I then install superSU??
Click to expand...
Click to collapse
Download it and flash in recovery or enter recovery, then reboot, it will ask to install supersu.
Sent from my C6903 using XDA Free mobile app

Anyone try it with lte version?
Gesendet von meinem LG-D802 mit Tapatalk

Thank you. Will try this if I decided to root.
Did you use to dev for Xperia S as well? Kinda remember back in those days.

pepporony said:
Thank you. Will try this if I decided to root.
Did you use to dev for Xperia S as well? Kinda remember back in those days.
Click to expand...
Click to collapse
Yeah, Xperia Neo => Xperia S => Xperia Z => Xperia Z1 and Z3 Tablet Compact now
But I had a break for a few months, recently started again
Sent from my C6903 using XDA Free mobile app

hack without root
Hey krabappel can an app be hacked without having root..?
I ask this because lucky patcher manage to hack an app and I have no root and locked bootloader.

First thanks for your hard work. Now I have some questions.
Is the kernel for wifi version 16/32gb?
How to open the bootloader without loosing the specific sony bravia and drm files. To backup them would be nice.
Thanks a lot for your time and work

bikeaholics said:
First thanks for your hard work. Now I have some questions.
Is the kernel for wifi version 16/32gb?
How to open the bootloader without loosing the specific sony bravia and drm files. To backup them would be nice.
Thanks a lot for your time and work
Click to expand...
Click to collapse
Before there is a root for locked bootloader you will always lose them.
Sent from my C6903 using XDA Free mobile app

krabappel2548 said:
I'm not sure, I don't know what the differences in kernel, but I don't think they have a lot of differences and probably it should work
Sent from my C6903 using XDA Free mobile app
Click to expand...
Click to collapse
I finally managed to unlock my tablet (Lte) and try your kernel. It works flawless. Thanks a lot for this.

Ahlbrink said:
Anyone try it with lte version?
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
I had the LTE version and this worked great
thanks to Krabappel2548

Question, Do you lose Sony's proprietary stuff when the bootloader is unlocked? Also, we will still receive software updates once unlocked and rooted? Thank you.
Sent from my NokiaX2DS using Tapatalk

xuggs said:
Question, Do you lose Sony's proprietary stuff when the bootloader is unlocked? Also, we will still receive software updates once unlocked and rooted? Thank you.
Click to expand...
Click to collapse
I am not sure about Sony proprietary stuff since I have not really used any of that. To me the tablet seems to work just fine after unlocking the bootloader.
Updates for the Sony applications like "Movies" are not working for me and it is probably caused by the unlocking. Waiting for CM12 so I can get rid of the Sony stuff...

xuggs said:
Question, Do you lose Sony's proprietary stuff when the bootloader is unlocked? Also, we will still receive software updates once unlocked and rooted? Thank you.
Sent from my NokiaX2DS using Tapatalk
Click to expand...
Click to collapse
If you aren't on stock kernel OTA updates will fail to verify. When you flash back stock kernel from an FTF with Flashtool it should work I think. Don't update through pc though. Use ftf files for safe updates, since pc companion might have a risk of bricking the device
Sent from my C6903 using XDA Free mobile app

[GUIDE] How to dirty flash 3.5.3 with TWRP, unlocked bootloader and root

I saw that many ppl have problems to flash the new 3.5.3 rom with a rooted device and TWRP.
This is how I dirty flashed it successfully without losing personal data (internal storage).
It's pretty easy actually.
If you have already installed the 3.5.2 Community Build and the modified TWRP:
Download the full zip 3.5.3 rom from the official OnePlus 3 Website: http://downloads.oneplus.net/devices/oneplus-3/
Copy the full zip to the sdcard
Copy SuperSU and Xposed(if needed) to the scard (can be found in the attachements)
Boot into TWRP and install the full 3.5.3 zip (no data wiping needed)
After the full zip installation is done, immediately install SuperSU and Xposed (if needed)
Wipe Cache/Dalvik after SuperSu and Xposed is installed
Reboot System
NO data will be lost during this process!
If you have an older version than 3.5.2 Community Build:
Download the TWRP Recovery 3.0.2-19 from the attachements or from the original post of eng.stk in this thread: http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56 and flash it via "fastboot flash recovery recovery.img" (or however you prefer to install the recovery)
Download the full zip 3.5.3 rom from the official OnePlus 3 Website: http://downloads.oneplus.net/devices/oneplus-3/
Copy the full zip to the sdcard
Copy SuperSU and Xposed(if needed) to the scard (can be found in the attachements)
Boot into TWRP and install the full 3.5.3 zip (no data wiping needed)
After the full zip installation is done, immediately install SuperSU and Xposed (if needed)
Wipe Cache/Dalvik after SuperSu and Xposed is installed
Reboot System
NO data will be lost during this process!
I can't guarantee that this is working for you, so make a backup first.
For me everything is working just perfectly, there is no need to reflash TWRP after the update, it's still there!
Every single setting is just like before the update.

Dirty flash over 3.2.4 stock?

shashank094 said:
Dirty flash over 3.2.4 stock?
Click to expand...
Click to collapse
Didn't try it, but probally yes
Sent from my ONEPLUS A3003 using XDA-Developers mobile app

Will this wipe my internal storage?

retroman957 said:
Will this wipe my internal storage?
Click to expand...
Click to collapse
You clearly did not read, did you?

What about if coming from other rom. i.e RR. Is full wipe remmonded?
---------- Post added at 02:55 AM ---------- Previous post was at 02:31 AM ----------
z31416 said:
What about if coming from other rom. i.e RR. Is full wipe remmonded?
Click to expand...
Click to collapse
Nevermind. I'll just reinstall all of my apps using titanium backup

The link on the OnePlus forums says file trashed by the owner - can someone post a mirror to the TWRP flashable file with the fix?

Works perfect! Thx ! !
Sent from my OnePlus3 using XDA Labs

Modified 3.5.2 means? @Kartoffl
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
---------- Post added at 04:21 AM ---------- Previous post was at 04:20 AM ----------
I m on freedom os 1.6.1 based on 3.5.1.......
Should i use same procedure?
Sent from my ONEPLUS A3003 using XDA-Developers mobile app

Ok, so I would like to Update the Modem only. So it should be enough to Update like you discribed without step 6 and following. After step 5 Modem should be updated and recovery from nandroid /System /data /Boot can start?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk

dmcleod said:
Ok, so I would like to Update the Modem only. So it should be enough to Update like you discribed without step 6 and following. After step 5 Modem should be updated and recovery from nandroid /System /data /Boot can start?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Click to expand...
Click to collapse
If you only want to flash the modem you can do so in fastboot. I'm in the process of uploading all the necessary .img's to update to the latest 3.2.5 without having to flash jenky recoveries that won't flash anythings else ect... Just give me a few and I link you to them. It's as easy as "fastboot flash modem".

Oh great thx. I was already think Ing about creative Own images from the zips but I'm not really familiar with it
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
---------- Post added at 06:49 AM ---------- Previous post was at 06:49 AM ----------
But you mean 3.5.2
Gesendet von meinem ONEPLUS A3003 mit Tapatalk

2x4 said:
The link on the OnePlus forums says file trashed by the owner - can someone post a mirror to the TWRP flashable file with the fix?
Click to expand...
Click to collapse
The link is actually still working for me, i posted a direct link in the main post, and also added a guide if you can't download the modified zip for some reason.
abhishekgarg294 said:
Modified 3.5.2 means? @Kartoffl
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Click to expand...
Click to collapse
It means that the updater-script file is modified (actually deleted only the first line) to prevent an error7. this file can be found in META-INF -> com -> google -> android -> updater-script
abhishekgarg294 said:
I m on freedom os 1.6.1 based on 3.5.1.......
Should i use same procedure?
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Click to expand...
Click to collapse
Never tried so i don't know it.

dmcleod said:
Oh great thx. I was already think Ing about creative Own images from the zips but I'm not really familiar with it
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
---------- Post added at 06:49 AM ---------- Previous post was at 06:49 AM ----------
But you mean 3.5.2
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Click to expand...
Click to collapse
Yep. 3.5.2. I'm Having an issue with my server right now. I'll have to get all this stuff up tomorrow. Sorry about that. I'll make sure to come back here and link you to it though.

I had TWRP 3.0.2 and rooted Oxygen 3.2.4.
I made the following:
- flashed TWRP 3.0.2-19 with TWRP to recovery .img
- rebooted to recovery (I am in TWRP 3.0.2.1 now)
- flashed the full original Oxygen 3.5.2 ROM
- flashed systemless SuperSu 2.78
- flashed xposed arm64
- wiped dalvik/art/cache
- reboot to system
all my previus apps works...

papzi57 said:
I had TWRP 3.0.2 and rooted Oxygen 3.2.4.
I made the following:
- flashed TWRP 3.0.2-19 with TWRP to recovery .img
- rebooted to recovery (I am in TWRP 3.0.2.1 now)
- flashed the full original Oxygen 3.5.2 ROM
- flashed systemless SuperSu 2.78
- flashed xposed arm64
- wiped dalvik/art/cache
- reboot to system
all my previus apps works...
Click to expand...
Click to collapse
Can you Boot in to Twrp now?

Hi ! I do to flash Twrp 3.0.2-19 oneplus3.img.zip with Twrp but don't work ?
I do rename the file ? Thank's

stefanpepe said:
Can you Boot in to Twrp now?
Click to expand...
Click to collapse
Of course you can. You don't even need to reflash it after updating the rom.
Sent from my ONEPLUS A3003 using XDA-Developers mobile app

Kartoffl said:
Of course you can. You don't even need to reflash it after updating the rom.
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
Click to expand...
Click to collapse
Works otg in Twrp?

stefanpepe said:
Can you Boot in to Twrp now?
Click to expand...
Click to collapse
Yup!
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
---------- Post added at 10:58 PM ---------- Previous post was at 10:57 PM ----------
ggkameleon said:
Hi ! I do to flash Twrp 3.0.2-19 oneplus3.img.zip with Twrp but don't work ?
I do rename the file ? Thank's
Click to expand...
Click to collapse
First unzip to. img...
Sent from my ONEPLUS A3003 using XDA-Developers mobile app