Database Develop

ADB Drivers

Hey everyone,
I have been happily using android on nand for quite sometime, and everything has been going well. However, I must have the wrong adb driver installed on my windows 7 computer and can't seem to remove it fully or install the proper one ever. Every time I remove it from device manager, and plug it back in, windows finds it as an HTC composite device, and adb through command line can't find any devices, ever! I would really like to be able to use this feature for things like tethering and what not.
Also, if anyone has any information on how to tether using any OS, windows, mac or linux, I would greatly appreciate it, along with any applications that might be helpful! I have done proxoid in the past and it worked well, pdaNet looks like it might work, but again I don't have a connection to my windows computer!
Thanks in advance for all of the help!

I am using the android SDK usb driver for ADB, you just have to edit a file and add the vendor ID. I can do things like adb logcat, adb shell gives me odd characters in directory listings,I get a ? from adb devices, not sure what that is about.
C:\Documents and Settings\Administrator\.android\adb_usb.ini
Code:
# ANDROID 3RD PARTY USB VENDOR ID LIST -- DO NOT EDIT.
# USE 'android update adb' TO GENERATE.
# 1 USB VENDOR ID PER LINE.
0x0e79
0x0bb4
The 0e79 is for my Archos tablet, works fine there. 0bb4 is what showed up in device manager when I plugged in the phone.

I tried to install that driver for my Polaris and it doesn't work.
It shows "Installing Android Phone" while I have my device plugged in. It takes forever and seems that the USB connection hangs the driver install process, but as soon as I disconnect my device, Windows shows me an error message.

Instructions for Vista\Windows 7
For WinVista/Win7
These OS will install Android as a mass storage device. You must uninstall the driver and update to the android driver model.
Instructions:
1) Unplug all removable devices(thumb drive, sdcards, etc) beside the Android phone.
2) Locate "Device Manager", usually under "control panel"
3) Select "Universal Serial Bus Controllers"
4) Select USB Mass Storage Device.
Note: to check if you have the correct device, click on the details tab and select "compatible ids" under properties. There should be three items listed under value.
5) Select uninstall driver
6) Close the window. Now in device manager a new "Android Phone USB device" with a yellow! will appear... If not, Unplug your android device or select Action -> Scan.
Note: view optional steps below if you still have problem with the your windows automatically installing drivers.
7) Click on the "Android Phone USB device"
8) Select "browse my computer to driver software"
9) Under "search this location for driver", Browse for the location that you have unzip the android_usb_windows and select the corresponding folder for your system(AMD64 for 64bit systems or x86 for 32bit systems. Right click -> properties on "My Computer" to check which system you have)
The driver is now installed and is ready to use.r
***Optional.
1. Go to System under Control Pandel.
2. Click on Hardware Tab and Under "Device Installation" select “Never search windows update for drivers”, then OK.
3. Go to Enable debugging on your phone. (Settings->Applications->Development->USB debugging).
4. Run USBDeview and remove all instances of Android Phone
5. Unplug your phone, and plug it in again.
7. Continue on step 7) above.
To turn off search windows update in windows 7, use this link below
http://www.addictivetips.com/windows-tips/disable-windows-update-device-driver-search-prompt/
To turn off automatic driver installation in windows 7, use the link below
http://www.addictivetips.com/window...tomatic-driver-installation-in-windows-vista/

Unfortunately, it doesn't work for my Polaris. The whole driver installation process hangs while my device is connected. As soon as i disconnect it, it continues, but it then complaints about it being disconnected.

SuperJMN said:
Unfortunately, it doesn't work for my Polaris. The whole driver installation process hangs while my device is connected. As soon as i disconnect it, it continues, but it then complaints about it being disconnected.
Click to expand...
Click to collapse
mine hung as well, what i ended up doing was turnng off the automatic installation. Then uninstalled the adb interface driver that was already installed. Then turning back on automatic installation. Then plugging phone back in and as it was installing automatically, manually installing the adb interface driver at the same time. Eventally the automatic install would error out and the manual install would work. It took like 15 or 20 minutes for it to finish.
when i uninstalled the adb interface, it turned into ''android phone'' in device manager. That was the driver i manually installed while the phone was automatically installing. I know it dont make much sense but it worked for me.

It looks like that will be my fate as well. It also says, that when I do the manual install of the ADB drivers that I already have the most current version installed!!! OH well, keep trying!

Same behavior on my pc with windows 7 32-bits.
When I have lucky the adb driver is connected (working correctly) for a few minutes and then it's disconnected.

i've tried various things to install adb driver, since last night but i've got nothing. i can't install adb driver for my xperia arc.
i installed sdk manager and usb driver. but when i try to install or update driver, i always see this message like "you're using the latest version". So i can't install it.
and also i've tried to uninstall driver and unplugged / plugged my device. then w7 automatically install driver. so i can't install adb driver again.
i want to root my phone, using this way at this link http://forum.xda-developers.com/showthread.php?p=18805560#post18805560
so i must install adb driver, please help me.
thanks everybody
edit: i've windows 7 home premium, 64-bits

Cannot open ddms.bat in order to take screenshots on Nexus One

I wanted to take screenshots of my Nexus One (2.2 FRF91/T-Mobile/Stock) but I'm just a newbie so I followed the guide on andriodcentral Anrdroid 101 tips. (Sorry I can't link to it since I'm a new user on these forums
That guide led me to another guide on how to install the sdk
When I tried to pull my 3rd party apps, cmd didnt do anything it simply said "0 pulled, 0 skipped", however I was able to pull my standard apps. I'm confident the sdk was installed correctly though.
I'm using a laptop with Windows 7 64bit and an AMD processor, I'm not sure if that information is helpful or not
I've already downloaded and installed the android 2.2 sdk, java runtime environment, java development kit. I've also properly installed the ADB drivers for the Nexus One. I also downloaded Eclispe but when I tried to run it, the application won't open. I have a feeling its because I didn't install it properly.
My problem now is that the ddms.bat (Dalvik Debug Monitor) won't open when I double click on it. I tried to right click and run as administrator but that didn't work either. In both cases when I try to open it, a cmd windows opens for a fraction of a second and then closes before I can read it. So I googled it and found a website that seemed to be able to solve the problem but its geared towards linux users.
I specifically followed these directions "To fix this a replace of the bundled swt is needed. The file is located under android-sdk-linux_x86-1.5_r3/tools/lib/. Rename swt.jar to swt_32b.jar. Next download swt for your platform. I have used swt-3.4.2-gtk-linux-x86_64.zip. Unpack the file swt.jar in the zipfile to android-sdk-linux_x86-1.5_r3/tools/lib/ and finally start ddms" but that didnt work either. So now my android-sdk-windows/tools/lib/x86_64 is full of other files rather than just having that swt.jar file.
Can anyone please help on getting ddms.bat to open or on how to get eclipse to open?, I'm so close to being able to take screenshots.
Some notes:
1.I'm not interested in rooting (too worried about bricking my phone), so please don't recommend that I root first.
2. USB debugging was ON when I tried it

TaeKwonDonkey said:
1.I'm not interested in rooting (too worried about bricking my phone), so please don't recommend that I root first.
Click to expand...
Click to collapse
Do you have the right drivers installed?
When your phone is on, plugged in, SD not mounted, and USB turned on, you should see "Android Phone" and "Android Composite ADB Interface" underneath that.
If you don't want to root (it's so easy and painless if you can follow instructions) then I don't know what to tell you other than:
1. Install "USB Deview" and remove all HTC/Google/Android related drivers.
2. Completely uninstall and wipe out the SDK stuff.
3. Rebooted, and reinstall Android SDK, and make sure that Windows7 installs the right drivers.
Installing the SDK is no more difficult than installing any other piece of software. If you've got Java installed, and you've plugged your phone in, and debugging is turned on, what *should* happen when you double-click ddms.bat is, the command prompt window opens, but then the Debug utility should open.
I had the screenshots stuff working before I ever rooted.
I followed the steps here: http://www.knowyourcell.com/google/...take_screenshots_on_the_google_nexus_one.html
Rooting is easy and painless. If you root, you don't have to flash a custom ROM or anything, but then you can install an app that you simply open, enable, then whenever you're doing something that you want to take a screenshot of, you shake the phone, and there it is.

[Q] ABD Drivers + Windows 7 issues (plus a couple more questions)

Hello XDA Community.
I'm attempting to install the new RC of CyanogenMod-6 for the Hero CDMA. I'm currently running the stock 2.1 version of Android. I've been following the guides that were referred to in the thread (I tried posting the urls but new users can't do so to prevent spam).
I've successfully rooted my phone and now I'm trying to do a Nandroid backup. I'm running Windows 7 32-bit and have hit a road block with ADB not recognizing my device. I followed the guide put together by Nephron to install the Android SDK. I've spent several hours going through threads and doing google searches looking for the solution. I have debugging turned on and I don't mount my SD drive when I plug the USB cord in. I've used USBDeview as some have suggested to delete current HTC drivers and then reinstall - no luck.
Here is a screen shot of what happens when I plug in my Hero:
See attached - "failedinstall.jpg"
Then I'll go to device manager to manually install the driver (it never allows me to manually select upon connection for some reason):
See attached "devicemgr.png"
And then this is the message I get when I point it to the "right" folder with the drivers:
See attached - "unabletoinstall.png"
So, on the Android SDK site I noticed this message:
"The USB driver for Windows provides support for the following Android-powered devices:
T-Mobile G1* / ADP1
T-Mobile myTouch 3G* / Google Ion
Verizon Droid*
Nexus One
* Or similar hardware on other carriers
Any additional devices will require Windows drivers provided by the hardware manufacturer.
^So is all of this HTC's fault? I've downloaded a couple of different .zip folders from different threads claiming that these drivers would work. But none of them have yet to do the trick for me.
I'm new at this so I have a few other questions as well:
Most guides I've read about how to do a Nandroid backup always recommend flashing a ROM b/f doing a backup. But I want to backup my current stock rom and settings before I flash. Wouldn't I want to create a recovery image before installing any other ROMs? Perhaps I'm misunderstanding some requirements?
Referring again to the thread on the CyanogenMod RC, can someone help me understand step #3? How do I know if it is necessary to update my radio? What implications does this have? I tried looking for info about this on the wiki and I couldn't find anything comprehensive enough to answer my question.
I'd appreciate any guidance!

Before you modify anything you will want to boot into recovery, assuming you flashed one, by holding down Home and turning the phone phone back on(power button). But since you don't have adb working then you probably haven't. You can still do this using terminal on your phone.
Download terminal emulator from market and then download a revoery image (AmonRa 1.6.2 or Darch's 1.7xx) and then mount your sdcard to the computer and transfer the recovery to the root of the sdcard. Open up terminal emulator and type in
Code:
su
cd /sdcard
flash_image recovery recovery-RA-heroc-v1.6.2.img(type the exact file name of the recovery you are using)
reboot recovery
If you had factory 2.1 on your phone then you have the latest radio. The radio can be flashed just like any ROM, but make sure that the radio is not for GSM phones as this will destroy your phone.
Instructions from Android Developers and ADB, Fastboot, and Nandroid for Noob
Download the latest Android SDK.
Unzip to C:\AndroidSDK
Right-click on (My) Computer, and select Properties
Go to Advanced settings
XP: Click the Advanced tab
Vista/7: Click Advanced system settings on the left
Click the Environment Variables button
double-click on Path (under System Variables)
Add the full path to the tools/ directory:
C:\AndroidSDK\tools\
(make sure a semicolon ( separates this new path from all the others)
Latest windows sdk version appears to need: "C:\AndroidSDK\android-sdk-windows\tools", install location may change with further updates..
Run C:\AndroidSDK\SDK Setup.exe
If you get an error about not having Java SDK installed but you do, add the path to 'bin' within your Java installation location to the Path environmental variable as described above before the sdk entry you just made. (eg add "C:\Program Files\Java\jdk1.6.0_20\bin;") This is likely to only be necessary where the 64 bit Java SDK is installed (obviously) on a 64 bit machine.
If it gives you an error about http go to settings and click on "Force http//....."
Unselect all options except for the USB driver
If you can't get the setup to work, download the USB-DRIVERS folder - HERE (Windows XP/Vista/Windows 7)
On your phone, click Settings > Applications > Development and make sure USB Debugging is on.
Plug your phone into your computer via USB cable (it needs to be on). It should say installing drivers if using Windows.
After it installs the drivers, goto the Start menu and type cmd into the search bar (Vista or higher) or click Run then type in cmd (XP) to open the command prompt.
Type the following into the command prompt window:
adb devices
You should see a serial number pop up, it’s the serial number of your phone. This means you are all set. If you do NOT see a serial number, then we need to reinstall the drivers.
Download USBDeview
While the phone is still plugged in, open USBDeview and sort by manufacturer. Find all the HTC/Android drivers and uninstall them all. (Windows Vista requires program to be run as an administrator, otherwise files won't uninstall.)
Once all have been uninstalled, unplug the phone from the USB cable and plug it back in.
The correct drivers should reinstall automatically (check the drivers as they are installing, one should say ADB Device driver).
To check, go to Devices in your Start menu then click on the “Android Phone”. Click on the Hardware tab, and check the list of drivers for ADB Interface under Type.
Done! Now you can use ADB to alter your phone from your computer.
If all else fails try installing HTC Sync software-- http://member.america.htc.com/download/Driver/HTC Hero (Sprint)/HTC_Sync_2.0.40.exe and then removing the drivers for it and then trying to install the android sdk drivers
Or you can dual boot with Linux and all you will need to do is download and unzip android sdk and edit 2 files and everything will work.

WOW>>>>>no that is way to confusing. the best thing to do is install vmware workstation. Then do a virtual WINDOWS XP MODE. from there you will be able to install the drivers and such in order to get the phone to be seen.

the version of htc sync i used for all my computers including win 7 was 2.0.33
if you want it then just pm me and I will get it to you
they don't offer it for a download anymore
this version corrected all my driver issues

Root guide with lots of pictures and instructions [AndroidNZ]

Hi everyone,
I see more people than usual having issues with Rooting their Nexus 7 because of problems with booting into CWM recovery post flash - thought I would do a nice plain and easy to follow guide including instructions for booting into CWM recovery from a command point (thanks to Wugfresh for his Toolkit which is used in the guide).
http://www.androidnz.net/2012/07/how-to-root-your-nexus-7.html
Porting the full guide here, first the text because that is a simple cut n paste job, images to follow soon:
Before we get down into the nitty-gritty of the guide itself you should familiarise yourself with our usual disclaimers at the beginning of this post. I say this not because we don't care if you have problems, it's just that our capacity to trouble shoot is limited, and you shouldn't have embarked on an adventure to Root your device unless you did your due diligence first and had some understanding of what you were up to. One final disclaimer weasel-word at the off: the CWM recovery ports for the N7 are still a little iffy at this stage and even when taking appropriate steps to make it permanent you may only be able to boot into it via a command prompt window. Expect updates once fixes are available.
Disclaimers out of the way, here are the things you will need:
A Nexus 7, fully charged
A windows PC (the guide may work on macs via Windows virtual environments, but that isn't confirmed by us and is outside the scope of this guide)
The appropriate Nexus 7 USB drivers, there are several ways to get these:
Preferred method - Go to this thread at XDA-Developers and download and install the Root Toolkit there, which has an automated drivers installation included (this is preferred because it is what the guide that follows is based on because the Toolkit is probably going to be the most straightforward for the majority to use, and even if it fails and they have to resort to using command prompts that is more easily done from the Toolkit). Many many thanks to WugFresh at XDA for producing such a noob-friendly Rooting application - please consider making a donation to him here.
Install the Android SDK from here. Please note if you are already an SDK user that the Google USB drivers in the SDK have updated with the release of the Nexus 7 and Jelly Bean and you should update your drivers from within the SDK itself
Install the universal drivers from this post at XDA-Developers, but please make note of how you will need to adjust fastboot commands if you are using these drivers
Go to this post at XDA-Developers and install the USB drivers from there if you have no luck whatsover with any of the other methods
OK, now that you've got the Root Toolkit let's proceed (if you plan to do this with the SDK and command prompts then you should be advanced enough to follow the guide here, I did the first time and if you've done this stuff before the process is trivial).
Open the Root Toolkit, at the prompt to select your device scroll down to the bottom and select the Nexus 7 and the version number that corresponds to the firmware installed on your Nexus 7 (you can find this out in Settings --> About tablet --> Android version)
You'll be greeted with a screen that looks like this:
Click on Initial Setup and use the automatic driver installation facility from here to install USB drivers, it will check that ADB and Fastboot commands are working before dropping you back to the install window.
Turn on USB Debugging in the Nexus 7 by navigating to Settings --> Developer options. Turn on Developer options using the toggle in the top right hand corner, and then turn on USB debugging
Connect your Nexus 7 to your computer with the micro USB cable that came in the box. At this point it is vital that your computer recognises the Nexus 7 as a connected device, you will know if it has because a Nexus 7 "AutoPlay" window should pop up and ask you what action you want to take. If it doesn't show up, pull down the notification tray and press on the notification that says "Connected as a media device". A new menu will open and select the "Camera (PTP)" option. You should now get the AutoPlay window.
Head back to the Toolkit, and select "Unlock" from here, be aware that this will wipe your device (you might want to take a backup if you've already installed a lot of stuff on the device, that's just a button click away also in the Toolkit)
This will boot the device up to a screen giving you the option to unlock the bootloader, with "Yes" selected hit the power button. You'll see some text in the top left corner telling you it is unlocking the device, and then you will see the red "Locked" text toward the bottom of the screen change to "Unlocked". Moments later the device will reboot, and because it will have been wiped you will need to either set it up again or just skip past set-up and get back to the homescreen.
Once you're back onto the home screen, connect as you did before and take the same steps to turn on USB debugging and get the AutoPlay prompt to appear. Then go back to the Toolkit and select the Root option with permanent CWM recovery. All things going well the process will be fully automated from here, it will check that ADB and Fastboot are working, push the SU and CWM files to the device, boot the Nexus 7 into it's bootloader, flash CWM recovery to the device, and then reboot with Root privileges and a fresh new recovery permanently installed.
...or so the theory goes. Using this method I get Root, but CWM recovery is only accessible via command prompt, and I see others having the same problem. So...
Accessing CWM recovery:
In the Root toolkit go to Advanced Utilities by launching it here:
On the next screen select Launch CMD Prompt:
Once the command prompt appears type: ADB reboot recovery - the phone will boot into CWM recovery for you, so you can do things like make Nandroid backups, install zip files and so forth
Installing the 4.1.1 update post-Root and installation of CWM recovery:
Install OTA Rootkeeper by Supercurio from the Play Store here
Open the app once installed and grant it SuperUser privileges
In the app select "Protect Root", and then "temp unroot" the device
Download a zip of the 4.1.1 update here.
Copy it to the internal SD of the Nexus 7
Access CWM recovery as per the instructions above. In this version of CWM recovery you will navigate the options with the volume keys and press the power button to select an option - do that to navigate to "Install zip from SD card" and press the home button
On the next screen go to down "Toggle signature verification" and toggle it until it says "disabled" at the bottom of the screen (it should be set to default to disabled, but you lose like 5s making sure)
Go up to install zip, navigate to the zip file you downloaded in step one and install it
When the device reboots go to OTA Rootkeeper and restore Root, viola! You're done!
So, after all is said and done you should have a Rooted Nexus 7, running the 4.1.1 update, and with a custom recovery that can only be accessed via command prompt. Don't forget to shout WugFresh, the Toolkits developer, a coffee - make a donation here.

Would be nice if you posted that guide on this forum too.
Thanks for the guide.

Oooohh pictures

Caliyork said:
Oooohh pictures
Click to expand...
Click to collapse
You know, for the totally acopic

Will this work on the new Build number JRO03D? Or should I wait until he updates the toolkit?

Dillon610 said:
Will this work on the new Build number JRO03D? Or should I wait until he updates the toolkit?
Click to expand...
Click to collapse
No idea. You can simply downgrade to an older stock image using his Toolkit though and then follow the same process used in the guide to update to the latest build.

"Meh" at requirement #2:
A windows PC
Click to expand...
Click to collapse
I haven't ran Windows for years. I hope there's a way to do this with Linux (assuming a computer is even needed?)
I remember rooting my Optimus T with Z4 root... one click, bingo bango, done.

JaSauders said:
"Meh" at requirement #2:
I haven't ran Windows for years. I hope there's a way to do this with Linux (assuming a computer is even needed?)
I remember rooting my Optimus T with Z4 root... one click, bingo bango, done.
Click to expand...
Click to collapse
"Windblows"

Any way to do on Mac? Also I'm new but what will root do that out of box won't? Any guides that help explain this? Thanks!

mario24601 said:
Any way to do on Mac? Also I'm new but what will root do that out of box won't? Any guides that help explain this? Thanks!
Click to expand...
Click to collapse
There's a wiki on cyanogenmod.com that explains root.

mario24601 said:
Any way to do on Mac? Also I'm new but what will root do that out of box won't? Any guides that help explain this? Thanks!
Click to expand...
Click to collapse
Should be doable on mac in a windows virtual environment, which seems to be how most mac users are doing things here at XDA.
Actually looking for someone to write "for mac" guides, if anyone is up for that!

[Q] Any easy way to completely copy the state of one Moto X to another?

I got a new phone with a wood back and will be selling my old one soon. Is there an easy way to completely clone my old phone's contents onto my new one?

Could try doing an NAND backup on the old one. Then putting it in the same directory of the new one. The directory would be /twrp/backups/(some numbers assigned to be your phones ID)/backup name.
Your ID will change, but you should be able to use that backup to restore on the new phone.
Sent from my XT1060 using xda app-developers app
---------- Post added at 01:20 PM ---------- Previous post was at 01:17 PM ----------
You might have to make an NAND on the new phone to have the recovery make the new filepath
Sent from my XT1060 using xda app-developers app

kkeller87 said:
Could try doing an NAND backup on the old one. Then putting it in the same directory of the new one. The directory would be /twrp/backups/(some numbers assigned to be your phones ID)/backup name.
Your ID will change, but you should be able to use that backup to restore on the new phone.
Sent from my XT1060 using xda app-developers app
---------- Post added at 01:20 PM ---------- Previous post was at 01:17 PM ----------
You might have to make an NAND on the new phone to have the recovery make the new filepath
Sent from my XT1060 using xda app-developers app
Click to expand...
Click to collapse
Thanks. This requires root, right? I haven't rooted either of the phones, although I would if it sped this process up. It's something that I eventually want to do anyway.

beelbeel said:
Thanks. This requires root, right? I haven't rooted either of the phones, although I would if it sped this process up. It's something that I eventually want to do anyway.
Click to expand...
Click to collapse
Yea. Sorry. A custom recovery/safestrap is required. I kinda assume anyone who's on XDA has it. Without root I'm not entirely sure how to do it any other way than manually.
Sent from my XT1060 using xda app-developers app

Without root the best you can do is mybackup pro or titanium backup. They will back up app data but not the apps themselves. Get your new phone, download your apps, restore app data from mybackup.

I wrote this before, but this is how you can backup your apps and their data with a computer and without root. Moto X's have Motorola Migrate that can move over some settings.
This process can take a bit to explain, so sorry for the long post.
First, you'll need to install Oracle’s Java Development Kit, which the Android SDK requires. Download and install the 32-bit version. The Android SDK wants the 32-bit version, even if you're using a 64-bit version of Windows.
Next, download the Android SDK from Google. Extract the .zip folder to a location of your choosing, but remember where you put it. If you have the option to open extracted contents in a new window, do so.
Okay, now open the Android SDK Manager (you may have to open a subfolder or two) with administrative rights. You do this by right clicking on the .exe and choosing the option "Run as administrator". A window will pop up, click yes, and after a small wait, the SDK Manager will open.
Now within the SDK Manager, under the tools section, check the box for Android SDK Platform-tools and click Install. This can take some time depending on your Internet connection. Once installed, go back to the open window where you clicked the SDK Manager .exe and navigate to the folder named "Platform Tools". If you're unsure where this is, the SDK Manager has the path of install located near the top.
Now let's get the phone ready. If you can, charge your device to its fullest. Now go into the settings, scroll down to 'development options'. Near the top of this menu, make sure the toggle switch is in the 'on' position. Now scroll down to USB debugging, and tick the box. Tap "OK" when the message shows up. Now plug the smaller end of the USB cable (preferably the one that came with your phone) into the bottom of the phone and the other into an open USB port of your computer. It's best to use a 2.0 USB port (no blue end) and if on a desktop, a port located in the rear.
If your computer starts installing any drivers, let it do this. Once that's finished, go to the window with the Platform Tools folder open. You should see a few files, two named "ADB" and another "Fastboot". Now hold your Shift key, right click in an open area, and choose the option "Open command window here". You may release the shift key at this time.
We're almost done. To make sure your tablet is seen by the computer type:
Code:
adb devices
One device should be listed. If you see no devices, adb can’t communicate with your device because its driver isn't installed properly. In this case, go back to the SDK Manager and download the USB drivers. You may also need to restart your computer.
Assuming you're up and working, type:
Code:
adb backup -apk -shared -all -f C:\backup.ab
This backs up all the installed apps (APK files) and shared storage (SD card) data to the C:\backup.ab file on your computer.
After running this command, you'll have to agree to the backup on the device. You can also encrypt the backup with a password here, if you like (leave it blank if you don't want encryption). Depending on how much data there is to back up, this can take some time. The device will let you know when it's done.
Now for the restoration process:
On the new device, make sure USB debugging is enabled. On the computer, follow the same steps for opening the adb command window. Ensure adb can see the device, then type:
Code:
adb restore C:\backup.ab
On the device, you will need to confirm you want to do a full restore. If you encrypted the backup, enter in the password, then hit "Restore my data". If you didn't add encryption, then leave that area blank. Once the restoration is done, you're good to go.

Thanks for the replies.
Hikikomori-Otaku said:
I wrote this before, but this is how you can backup your apps and their data with a computer and without root. Moto X's have Motorola Migrate that can move over some settings.
This process can take a bit to explain, so sorry for the long post.
First, you'll need to install Oracle’s Java Development Kit, which the Android SDK requires. Download and install the 32-bit version. The Android SDK wants the 32-bit version, even if you're using a 64-bit version of Windows.
Next, download the Android SDK from Google. Extract the .zip folder to a location of your choosing, but remember where you put it. If you have the option to open extracted contents in a new window, do so.
Okay, now open the Android SDK Manager (you may have to open a subfolder or two) with administrative rights. You do this by right clicking on the .exe and choosing the option "Run as administrator". A window will pop up, click yes, and after a small wait, the SDK Manager will open.
Now within the SDK Manager, under the tools section, check the box for Android SDK Platform-tools and click Install. This can take some time depending on your Internet connection. Once installed, go back to the open window where you clicked the SDK Manager .exe and navigate to the folder named "Platform Tools". If you're unsure where this is, the SDK Manager has the path of install located near the top.
Now let's get the phone ready. If you can, charge your device to its fullest. Now go into the settings, scroll down to 'development options'. Near the top of this menu, make sure the toggle switch is in the 'on' position. Now scroll down to USB debugging, and tick the box. Tap "OK" when the message shows up. Now plug the smaller end of the USB cable (preferably the one that came with your phone) into the bottom of the phone and the other into an open USB port of your computer. It's best to use a 2.0 USB port (no blue end) and if on a desktop, a port located in the rear.
If your computer starts installing any drivers, let it do this. Once that's finished, go to the window with the Platform Tools folder open. You should see a few files, two named "ADB" and another "Fastboot". Now hold your Shift key, right click in an open area, and choose the option "Open command window here". You may release the shift key at this time.
We're almost done. To make sure your tablet is seen by the computer type:
Code:
adb devices
One device should be listed. If you see no devices, adb can’t communicate with your device because its driver isn't installed properly. In this case, go back to the SDK Manager and download the USB drivers. You may also need to restart your computer.
Assuming you're up and working, type:
Code:
adb backup -apk -shared -all -f C:\backup.ab
This backs up all the installed apps (APK files) and shared storage (SD card) data to the C:\backup.ab file on your computer.
After running this command, you'll have to agree to the backup on the device. You can also encrypt the backup with a password here, if you like (leave it blank if you don't want encryption). Depending on how much data there is to back up, this can take some time. The device will let you know when it's done.
Now for the restoration process:
On the new device, make sure USB debugging is enabled. On the computer, follow the same steps for opening the adb command window. Ensure adb can see the device, then type:
Code:
adb restore C:\backup.ab
On the device, you will need to confirm you want to do a full restore. If you encrypted the backup, enter in the password, then hit "Restore my data". If you didn't add encryption, then leave that area blank. Once the restoration is done, you're good to go.
Click to expand...
Click to collapse
Thanks for the detailed response. I actually use a mac, and I might have to do some research to see what parts of this process still apply. I may also just investigate other methods of transferring most (perhaps not all) of the data.

beelbeel said:
Thanks for the detailed response. I actually use a mac, and I might have to do some research to see what parts of this process still apply. I may also just investigate other methods of transferring most (perhaps not all) of the data.
Click to expand...
Click to collapse
This may help with getting adb to work on your Mac http://forum.xda-developers.com/showthread.php?t=1917237 Otherwise you could use an application like VMware Fusion to virtually run a Windows OS on your Mac. I know you can get evaluation copies of Windows to use that don't require a product key (they only work for 90 days though).