Related
By example of this thread, I thought it would be convenient to also create a separate thread for our L5. I will update this first post with relevant information and links when needed.
Info
CyanogenMod's site: http://www.cyanogenmod.org/
Announcement on Google+ by CM: link
Screenshots by luKi13223: link
Screenshots by Sirrocco with dpi lowered to 130 and theme applied: link
Requirements
Properly unlocked boot loader (here, a guide on top of first post)
Root/working CWM
Ability to read and common sense
Downloads
Nightlies started building. You can get the latest build from http://get.cm/?device=e610 OR http://10.cmxlog.com/?device=e610
CWM Recovery by Ricardo Cerqueira (CyanogenMod): Direct download. Alternatively you can download the flashable zip provided in the attachment, it's the same, but easier to install if you already had a recovery installed.
Google Apps (GAPPS) for Jelly Bean/CM10: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Short Installations guide
Make sure you meet the requirements
Download needed files (see above) and place them on your internal sd card
Update your ClockWorkMod Recovery to v6.0.2.8 (you can do this by using terminal, adb (guide) or use the flashable zip I've attached
This will avoid status(7) error messages and prevent issues with ROM Manager.
Flash "cm-10-build date-NIGHTLY-e610.zip" from your internal sd card with CWM (or if you prefer with ROM Manager)
[*]Optional: Flash custom kernel by PinkFlozd: link to thread WARNING: Don't install this kernel with builds created on 21 april 2013 or later (at least not untill someone updates the kernel)
Optional: Flash "gapps-jb-20121011-signed.zip"
After first boot see if your receiving any signal (provided your normally have any signal on that spot). If not, don't worry, a simple reboot might fix it.
Enjoy
Bugs:
Considering these are the very first nightly builds of CM10 for our device, the dev did a pretty great job. Almost everything is working. Thanks to him :highfive:
Network / data is not working after 1st boot. A simple reboot after a few minutes might fix this
Multi-touch not fully working (dual touch works)?
SD card is full error, while there is still room left (up to at least 300 MB). I haven't experienced this bug in a while, it may be fixed, but I'm not sure.
Accelerometer
Small mods/Fixes
Wake with Home key
Pinkflozd's custom kernel[/COLOR]. Supports multi-touch and allows for overclocking. His kernel doesn't work with builds after April 14th
Overclocked kernel for builds made after April 14th
Workaround to make accelerometer work
:
i tried to flash this on my E612..
But i got an error.
Error in sdcard/cm blah blah.zip
(status 7)
Installation aborted.
Ianuz1320 said:
i tried to flash this on my E612..
But i got an error.
Error in sdcard/cm blah blah.zip
(status 7)
Installation aborted.
Click to expand...
Click to collapse
same here...
Will the developer look here for bugs? Or is there some other way to report CM10 bugs?
Anyway, I noticed that it drains battery much faster than the stock rom too.
Tonight it drained 20% of battery just by standby.
Ianuz1320 said:
i tried to flash this on my E612..
But i got an error.
Error in sdcard/cm blah blah.zip
(status 7)
Installation aborted.
Click to expand...
Click to collapse
First install the recovery provide by CM. This will fix this problem. You will need to copy your flashables zips and back ups to the internal SD-card, because this version only mounts internal SD (instead of only the external)
E.jr said:
Will the developer look here for bugs? Or is there some other way to report CM10 bugs?
Anyway, I noticed that it drains battery much faster than the stock rom too.
Tonight it drained 20% of battery just by standby.
Click to expand...
Click to collapse
I don't know if he will look here. We could inform him about it, when we have more clarity about the bugs.
My main purpose was to concentrate talk about CM10 in one place, because in the other thread also other subjects were discussed and it got messy. And we might help each other here with CM10 related problems.
ldeleeuw said:
First install the recovery provide by CM. This will fix this problem. You will need to copy your flashables zips and back ups to the internal SD-card, because this version only mounts internal SD (instead of only the external)
Click to expand...
Click to collapse
thank you buddy..but where can we get recovery provide by CM?
For Instalation aborted :
Open downloaded zip by winrar or 7zip.
Open Meta-inf>google>android>updater-script
Open updater-script by notepad++
Delete first lane in updater-script
Save and rebuild archive (automaticly)
Copy your package to sd card and instal via cwm
Kisloo said:
For Instalation aborted :
Open downloaded zip by winrar or 7zip.
Open Meta-inf>google>android>updater-script
Open updater-script by notepad++
Delete first lane in updater-script
Save and rebuild archive (automaticly)
Copy your package to sd card and instal via cwm
Click to expand...
Click to collapse
it's not working buddy.
delete this lane :
assert(getprop("ro.product.device") == "e610" || getprop("ro.build.product") == "e610");
Click to expand...
Click to collapse
and it will work
Thanks buddy.. it worked on my phone!! but first boot took so long..i was stuck on CyanogenMod boot logo!! untill now!
Ianuz1320 said:
thank you buddy..but where can we get recovery provide by CM?
Click to expand...
Click to collapse
check first post
The new nightly does seem to lag a little as opposed to the original one.
The first one was smoother I've noticed.
E617
Has anyone tried CM10 for the E617 version of the L5? I'm to much of a newb to try it myself, I wouldn't be able to find my way back if I screwed-up my phone.
Bootlop
Im on cm bootloop about 20 minutes WHEN THIS WILL BOOT UP
I noticed that this cm10 for e610 has a kind of problem with multitouch,I have played shadow gun,modern combat 3 and modern combat 4 and six guns and in all these 4 games, I noticed that I can't move at the same time that I shoot,I wait that they solve this problem in next updates ;p
Sent from my LG-E610 using xda premium
Kisloo said:
delete this lane :
and it will work
Click to expand...
Click to collapse
thanks a lot mate!
---------- Post added at 08:57 PM ---------- Previous post was at 08:53 PM ----------
DodoKoce said:
Im on cm bootloop about 20 minutes WHEN THIS WILL BOOT UP
Click to expand...
Click to collapse
E: I found out why there is a bootloop, we didn't took the right bootloader, see here my tutorial: http://forum.xda-developers.com/showthread.php?t=2186161 - if you do everything like i did, everything will work properly
Use older build, idk - new is more bugged :/ Old working smarter than new.
OK, I've got it installed (nightly 20130310), first I installed the provided CWM (6.0.2.8), had to do that manually though, because for some reason Rom Manager destroyed the 6.0.2.5 version I had when I tried to install CWM through Rom Manager.
It's running smoothly, although I also see a little graining in the screen. I had no data issues.
Also, booting didn't take that long.
One strange phenomenon:
I had FreeL5 running before CM10. Before flashing CM10 I did a factory reset from CWM, cleaned cache and Dalvik cache. After booting CM10 for the first time, my WiFi settings were still there... hadn't expected that, but since I'm on a corporate WiFi connection which needs a username and password to connect, it was nice not to have to retype it :victory:
---
Previous devices:
HTC Desire - MIUI
HTC Desire HD - MIUI
Sony XPeria S - FreeXPeria JB
Current devices:
Samsung Galaxy Tab 2 7.0 - Stock JB (because my girlfriend doesn't want me 'messing' with it)
LG Optimus L5 (E610) - CM10 nightly
Bootloop too, any way to solve?
Official nightlies are up for our device's:
Scorpion (LTE): http://download.cyanogenmod.org/?device=scorpion
Scorpion (Wifi): http://download.cyanogenmod.org/?device=scorpion_windy
TWRP Installation:
You can install TWRP through ADB or Terminal Emulator app. Thanks to ejdan for finding this!
ADB:
Before you begin:
- Download TWRP:
Code:
[URL="http://qzerno.troxit.nl/android/misc/TWRP/Sony%20Xperia%20Z3%20Tablet%20Compact/WiFi%20-%20SGP61x/twrp.img"]WiFi - SGP61x[/URL]
[URL="http://qzerno.troxit.nl/android/misc/TWRP/Sony%20Xperia%20Z3%20Tablet%20Compact/LTE%20-%20SGP62x//twrp.img"]LTE - SGP62x[/URL] (Credits to [B]der_bert[/B] for making this)
- set Root access to "Apps and ADB" in Developer options.
- set USB Debugging Mode to "ON" in Developer options.
Instructions:
1. Put twrp.img in the root of your Z3TC.
2. Open command prompt and go to the location where ADB.exe is.
3. Start an ADB shell:
Code:
adb shell
4. Gain root access:
Code:
su
5. Flash TWRP on FOTAKernel partition
Code:
dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
6. Reboot to recovery and you would see TWRP.
Terminal Emulator:
Before you begin:
- Download TWRP:
Code:
[URL="http://qzerno.troxit.nl/android/misc/TWRP/Sony%20Xperia%20Z3%20Tablet%20Compact/WiFi%20-%20SGP61x/twrp.img"]WiFi - SGP61x[/URL]
[URL="http://qzerno.troxit.nl/android/misc/TWRP/Sony%20Xperia%20Z3%20Tablet%20Compact/LTE%20-%20SGP62x//twrp.img"]LTE - SGP62x[/URL] (Credits to [B]der_bert[/B] for making this)
- set Root access to "Apps" in Developer options.
- set Local terminal to "ON" in Developer options. (If you don't have this option download then Terminal Emulator from the Play Store)
Instructions:
1. Put twrp.img in the root of your Z3TC.
2. Open the app Terminal or Terminal Emulator
3. Gain root access:
Code:
su
4. Flash TWRP on FOTAKernel partition
Code:
dd if=/sdcard/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
5. Reboot to recovery and you would see TWRP.
Version Information:
Status: Discontinued
Created 2014-12-24
Last Updated 2015-03-25
Nice? any plans for LTE model?
Lte model is merged into cm sources so it should work
Will try to get up an simple kernel with intelliplug and so on
moritz31 said:
Lte model is merged into cm sources so it should work
Will try to get up an simple kernel with intelliplug and so on
Click to expand...
Click to collapse
I'd be interested and thanks!
chaostimmy said:
Nice? any plans for LTE model?
Click to expand...
Click to collapse
I'm building right now for LTE but I can't test this builds.
EDIT: LTE Build is up!
I have tried the Wifi version and it seems to work fine.
First I had a few restarts when locking the screen but it seems to have fixed itself now. Maybe because I disabled double tap to sleep/wake?
SD card is not mounted. Is there a way to fix it? The card is listed in /proc/partitions so it should be possible to fix with a proper fstab.
ejdan said:
SD card is not mounted. Is there a way to fix it? The card is listed in /proc/partitions so it should be possible to fix with a proper fstab.
Click to expand...
Click to collapse
I compared fstab.qcom in CM12 with the stock kernel and found a difference. The stock kernel has /devices/msm_sdcc.3/mmc_host for sdcard1 but CM12 has /devices/msm_sdcc.2/mmc_host
I changed '2' to '3' in the ramdisk and now SD card works. I have attached my modified kernel image. Unpack the zip file and flash cm12-sdcard1-fix.img using fastboot. This kernel is taken from cm-12-20141225-0800-UNOFFICIAL-scorpion_windy.zip
Qzerno said:
I'm building right now for LTE but I can't test this builds.
EDIT: LTE Build is up!
Click to expand...
Click to collapse
Great, thank you but I could not install it. In TWRP it says:
"This package is for device: SGP621, SGP641, SGP651, scorpio; this device is scorpion_windy."
It's not. I have the LTE version, SGP621 aka Scorpion.
Thanks for the builds! What has everyone flashed?
Home Launcher
Is Trebuchet included in these builds? Ive flashed todays (26th) build and am I'm just getting the options for Google Now and Nova Launcher.
---------- Post added at 08:09 PM ---------- Previous post was at 07:55 PM ----------
Any chance of making the kernel flashable?
BUG REPORT: double tap to wake is not working
ejdan said:
I compared fstab.qcom in CM12 with the stock kernel and found a difference. The stock kernel has /devices/msm_sdcc.3/mmc_host for sdcard1 but CM12 has /devices/msm_sdcc.2/mmc_host
I changed '2' to '3' in the ramdisk and now SD card works. I have attached my modified kernel image. Unpack the zip file and flash cm12-sdcard1-fix.img using fastboot. This kernel is taken from cm-12-20141225-0800-UNOFFICIAL-scorpion_windy.zip
Click to expand...
Click to collapse
Nice, thanks for fixing this. Do you maybe know which file in the source need to edit to get this works? then I can commit it to CyanogenMod.
Noe_S said:
Great, thank you but I could not install it. In TWRP it says:
"This package is for device: SGP621, SGP641, SGP651, scorpio; this device is scorpion_windy."
It's not. I have the LTE version, SGP621 aka Scorpion.
Click to expand...
Click to collapse
The recovery (TWRP) need to get a build separately for the scorpion (SGP621), then it should work.
I will search for a alternative installation method for the scorpion.
xan_asmodi said:
Is Trebuchet included in these builds? Ive flashed todays (26th) build and am I'm just getting the options for Google Now and Nova Launcher.
---------- Post added at 08:09 PM ---------- Previous post was at 07:55 PM ----------
Any chance of making the kernel flashable?
Click to expand...
Click to collapse
Yes, Trebuchet is included in these build, PA Gapps remove Trebuchet I can upload Trebuchet separately if you want.
I want to make the kernel flashable but that has not yet succeeded.
xan_asmodi said:
BUG REPORT: double tap to wake is not working
Click to expand...
Click to collapse
Thanks for the bug report. I also noticed this. I will add this in the OP.
Qzerno said:
Nice, thanks for fixing this. Do you maybe know which file in the source need to edit to get this works? then I can commit it to CyanogenMod.
Click to expand...
Click to collapse
I made a pull request on Github. Not sure if it is the correct way to do it
https://github.com/CyanogenMod/android_device_sony_scorpion_windy/pull/1
The file fstab.qcom is in rootdir. Because of the overlay (scorpion is based on shinano common) I had to add a new file. I have not built from source so I have not checked that it is working but manually updating the ramdisk did work.
ejdan said:
I made a pull request on Github. Not sure if it is the correct way to do it
https://github.com/CyanogenMod/android_device_sony_scorpion_windy/pull/1
The file fstab.qcom is in rootdir. Because of the overlay (scorpion is based on shinano common) I had to add a new file. I have not built from source so I have not checked that it is working but manually updating the ramdisk did work.
Click to expand...
Click to collapse
Ahh that's why I can't find that file. I have add the file local and building right now.
EDIT: Yeah I have 10 posts!
Qzerno said:
Ahh that's why I can't find that file. I have add the file local and building right now.
Click to expand...
Click to collapse
You may have to add the file to a makefile somewhere but lets see how it goes.
Qzerno said:
Thanks for the bug report. I also noticed this. I will add this in the OP.
Click to expand...
Click to collapse
Your welcome Should I post stuff as I find them or PM you so you can update the OP?
Could you post trebuchet separately? That'd be a great help. I think the PA guys need to incorporate Aroma installer, because I don't think Google Now Launcher is as good as Trebuchet.
Keep up the good work, hopefully we'll get the camera drivers soon. I'll look to see if the camera module is the same as the Z2 tab, if so we may not need to wait, just take them from the other repository.
Oh, one more thing...
Xposed doesn't install through a combination of crap cyanogenmod recovery and other stuff which I can't profess to understand
Edit: I now understand that this is because of the shift from Dalvik runtime to ART. Getting CM12 to run Xposed will either require reverting to Dalvik (is this possible?) or waiting for the Xposed devs to rewrite Xposed.
When updating to a new nightly, you can flash over the previous build. When you do you need to reflash the ram disk/kernel update.
BUG REPORT: Rebooting into recovery from power menu doesn't work. Requires manual intervention at 'Sony screen'/purple LED.
Intalled it and works fine as far as i can tell. Can´t move Apps to he sd card thogh (not enough space error) but that might be because of that known sd issue. I have general access to the sd though.
Cheers and thanks
Chris
MasterTRL said:
Intalled it and works fine as far as i can tell. Can´t move Apps to he sd card thogh (not enough space error) but that might be because of that known sd issue. I have general access to the sd though.
Cheers and thanks
Chris
Click to expand...
Click to collapse
What nightly are you using and did you flash the sd card fix?
This is my first ROM for public use.
I used SuperR kitchen to deodexed and deknoxed.
* USB DEBUGGING Enabled by default.
* R/W fixed in permission for ExtSdCard
That's it no other tweaks...
Thanks to
@SuperR. for his kitchen-here
@bilgerryan for keeping the S4 alive!
To install the ROM
1. copy the zip to the extSdCard
2. TWRP recovery
3. Go into recovery mode.
4. Wipe Dalvik, Cache, system, data.
5. Perform factory reset before installing zip
6. Install zip.
7. Reboot.
This has been tested on SPH-L720
If you download press the thanks button.
DOWNLOAD ROM-here
OK3 Kernel Download -here
OK3 Modem Download (Flash with Odin)-here
[MOD] Hotspot Mod (My first Mod)
1. Make a nandroid backup!!!
2. Flash zip in recovery
3. Wipe cache and dalvik cache
7. Reboot
Hotspot-Mod Download-here
[MOD] Recent Apps Mod
This will add a recent apps shortcut to the pulldown statusbar.
1. Make a nandroid backup!!!
2. Flash zip in recovery
3. Wipe cache and dalvik cache
7. Reboot
Recent Apps Mod Download-here
More mod and links -here
About device screenshots
OK3 kernel Download updated.
Has Anyone flashed this Rom? Is everything fine?
My first rom just curious.
Did they touch the modem in the OK3 update or is it the same as OH1/OD2?
nismotigerwvu said:
Did they touch the modem in the OK3 update or is it the same as OH1/OD2?
Click to expand...
Click to collapse
I'm not sure. I Odin the OK3 Stock tar. So I'm really not positive but I think they did.
EDIT. Yes they did.
nismotigerwvu said:
Did they touch the modem in the OK3 update or is it the same as OH1/OD2?
Click to expand...
Click to collapse
It's really impossible for us to know as Samsung does not release any information on the modem.
OK3 Modem tar download added to OP in case someone needs it
My first Mod Hotspot-Mod Download link updated in OP. Please give feedback as I am still learning.. lol
I Gave It a Go...
I tried installing it this evening. Loaded just fine. But, I couldn't get the WIFI to turn on. But, I attempted to load all three of your modules at the same time: ROM, Kernel & Hot-Spot Mod. Some other stuff (kids!) came up, so I had to restore from my Nandroid Backup and move on. If I get some time tomorrow, I'll try them one at a time (in order) and let you know how that goes. Thanks for doing this.
dsjxxxxx said:
I tried installing it this evening. Loaded just fine. But, I couldn't get the WIFI to turn on. But, I attempted to load all three of your modules at the same time: ROM, Kernel & Hot-Spot Mod. Some other stuff (kids!) came up, so I had to restore from my Nandroid Backup and move on. If I get some time tomorrow, I'll try them one at a time (in order) and let you know how that goes. Thanks for doing this.
Click to expand...
Click to collapse
Try flashing modem with odin.
Sent from my SPH-L720 using Tapatalk
[MOD] Recent Apps Mod
[MOD] Recent Apps Mod
This will add a recent apps shortcut to the pulldown statusbar.
1. Make a nandroid backup!!!
2. Flash zip in recovery
3. Wipe cache and dalvik cache
7. Reboot
Download
https://www.androidfilehost.com/?fid=24391638059058192
Downloaded modem zip and it's labeled as an md5 but it's 60mb is this just a typo?
knoc said:
Downloaded modem zip and it's labeled as an md5 but it's 60mb is this just a typo?
Click to expand...
Click to collapse
Its not a zip file. Modem must be flashed with odin.
When I load.it through mobile Odin it uses modem 1 and modem2 slot..I'm on cm13 oh1 I can just flash through mobile Odin can't I?
knoc said:
When I load.it through mobile Odin it uses modem 1 and modem2 slot..I'm on cm13 oh1 I can just flash through mobile Odin can't I?
Click to expand...
Click to collapse
No, Mobile Odin hasn't worked since Jelly Bean.
It Works! It Works With Xposed!
Yes. I needed the modem. Everything works great - including Xposed. Thanks!!!
For those who need it, I provide a summary of the steps I took that resulted in success.
Base OK3 Install
1) Installed the OK3 ROM (SPH-L720_OK3_Stock_Deodexed.zip) using TWRP, following the 7 steps listed in katodragon's original post (including reboot).
- The phone took ~15 minutes on the Samsung splash screen (black background with pseudo fireworks coming out of the logo) to set up. Patience is required.
- No wifi. The ROM could not turn on the radio. The slider would hang halfway to on. If I backed out and went back to the setting, it was clearly "off."
2) Installed the OK3 Kernel (SPH-L720_Stock-Deodexed-kernel.zip) using TWRP.
- I did perform another factory reset with TWRP just before installing the zip using TWRP, then rebooted. I did not wipe the system partition, though.
- Still no wifi. Same deal.
- I'm not sure if the kernel is necessary. But, everything is working well for me WITH the kernel. Enough said.
3) Installed the OK3 Modem (OK3_Modem.tar.md5) using ODIN.
- Followed the usual process: phone in download mode, selected "AP" in ODIN, et cetera.
- Success! Everything - including wifi - has worked well since.
- Performed a NANDROID Backup using TWRP at this point, but I have not had to restore from it.Xposed Install
1) Side-loaded "Xposed Installer" (XposedInstaller_3.0_alpha4.apk).
- Just for chuckles, I tried to fire it up. In failing, the app asked if the Xposed Framework was install (it wasn't).
2) Installed "Xposed Framework" (xposed-v75-sdk21-arm-arter97-snapdragon_requestConcurrentGC.zip) using TWRP.
- This time, I did not clear anything before installing the zip (because it isn't a ROM).
- My first attempt failed, but I received a clear report (in bold red letters) that I needed to use the "ConcurrentGC" version of the framework. The successful file is referenced above.
- Rebooted.
- Success! I have installed several (~12) Xposed Modules since. Mostly side-loaded, but a few from the Play Store. Zero issues.
Xposed Notes
- Resources I Found Helpful
a) Announcement w/ Directions (rovo89): http://forum.xda-developers.com/xposed/official-xposed-lollipop-t3030118
b) HighonAndroid (Max Lee): http://highonandroid.com/android-ap...ed-installer-on-android-lollipop-5-05-15-1-1/
c) Xposed Module Repository: http://repo.xposed.info/module-overview
d) Wanam's Xposed Module Repository: http://repo.xposed.info/users/wanam
This is where I scored "Wanam Xposed for Android 5.x.x."
- Xposed Installer (rovo89): http://forum.xda-developers.com/showthread.php?t=3034811
- Xposed Framework (arter97): http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
Thank You to KATODRAGON
Again, thanks to katodragon for the deodexed ROM for the SPH-L720! It's been about five months since I upgraded to Lollipop. And, that means five months without Xposed. Thanks to him, I'm back to where I want to be.
---------- Post added at 09:25 PM ---------- Previous post was at 09:22 PM ----------
katodragon said:
Its not a zip file. Modem must be flashed with odin.
Click to expand...
Click to collapse
I successfully installed the OK3 Modem file as-is (including the MD5 extension) using ODIN v3.10.6 (Windows 10 Pro desktop PC).
^^^ Great Post ^^^ Glad it working for you! Which exposed modules are u using?
Sent from my SPH-L720 using Tapatalk
katodragon said:
^^^ Great Post ^^^ Glad it working for you! Which exposed modules are u using?
Click to expand...
Click to collapse
Current Modules (all working - no issues):
3C Toolbox Pro v1.6.9
AdBlocker v1.4
Fix Lollipop Memory Leak v1.2
Greenify v2.7.1 (highly recommend this app)
Magnet Sensor Control v1.1
No Lock Home v2.0.1
Play Store Link in App Info v1.0
SwiftKey Goodness on More Fields v1.0
Wanam Xposed for 5.X.X v1.3.0 (highly recommend this app)
Waze Audio Interceptor v1.0 (not tested yet)
WiFi Filter v1.0.1
XInstaller v5.0 (not all functions work - but not causing any problems either)
Xposed Torch v2.1.1
I also have Secure Settings v1.3.6, but it is not detecting the presence of Xposed. So, I can't used the one Xposed function in the app. It's not a function that I'm looking to use, so I decided not to mess around with it. But, I'm guessing that the problem MIGHT be fixable by CAREFULLY uninstalling the app, then reinstalling it. My hypothesis is that the problem stems from Secure Settings being installed before Xposed. Something that I left out of my last post is that I restored (Titanium Backup) all of my apps and data after completing the OK3 install but before I attempted to install Xposed.
---------- Post added at 11:40 PM ---------- Previous post was at 11:29 PM ----------
katodragon said:
[MOD] Recent Apps Mod
This will add a recent apps shortcut to the pulldown statusbar.
1. Make a nandroid backup!!!
2. Flash zip in recovery
3. Wipe cache and dalvik cache
7. Reboot
Download
https://www.androidfilehost.com/?fid=24391638059057708
Click to expand...
Click to collapse
I was going to give this mod a try. When I clicked the download link, I got a message saying that the file has been deleted.
FYI. I decided not to try out the Hotspot Mod because I use Ting (a less-expensive way to use the Sprint network) as my carrier. Ting lets me use the native hotspot capability for no extra charge.
Sorry. Try the link in the first post. I forgot to update that one.
dsjxxxxx said:
Current Modules (all working - no issues):
3C Toolbox Pro v1.6.9
AdBlocker v1.4
Fix Lollipop Memory Leak v1.2
Greenify v2.7.1 (highly recommend this app)
Magnet Sensor Control v1.1
No Lock Home v2.0.1
Play Store Link in App Info v1.0
SwiftKey Goodness on More Fields v1.0
Wanam Xposed for 5.X.X v1.3.0 (highly recommend this app)
Waze Audio Interceptor v1.0 (not tested yet)
WiFi Filter v1.0.1
XInstaller v5.0 (not all functions work - but not causing any problems either)
Xposed Torch v2.1.1
I also have Secure Settings v1.3.6, but it is not detecting the presence of Xposed. So, I can't used the one Xposed function in the app. It's not a function that I'm looking to use, so I decided not to mess around with it. But, I'm guessing that the problem MIGHT be fixable by CAREFULLY uninstalling the app, then reinstalling it. My hypothesis is that the problem stems from Secure Settings being installed before Xposed. Something that I left out of my last post is that I restored (Titanium Backup) all of my apps and data after completing the OK3 install but before I attempted to install Xposed.
---------- Post added at 11:40 PM ---------- Previous post was at 11:29 PM ----------
I was going to give this mod a try. When I clicked the download link, I got a message saying that the file has been deleted.
FYI. I decided not to try out the Hotspot Mod because I use Ting (a less-expensive way to use the Sprint network) as my carrier. Ting lets me use the native hotspot capability for no extra charge.
Click to expand...
Click to collapse
Here are my Xposed Modules
--APM+ (I like that you can use the screen record function)
--Downloads2SD
--Fix Lollipop Memory Leak (not sure if I still need this with OK3)
--Greenify with donation features
--Wanam Xposed
--YouTube AdAway
Hi, I am sharing my Nougat ROM for LG-P880 with the XDA community. As a tribute to the original @MoltenMotherBoard, it will continue to be named as such.
AFH download:
https://www.androidfilehost.com/?w=files&flid=109853
ChangeLog
20180122
- Android-7.1.2_r36 (N2G48H)
- kernel
* Optimized kswapd based on kernel-msm/3.10/Bullhead
- Tuned extra_free_kbytes to 4 screen buffers
- Reduced I/O read_ahead_kb from 2048 to 256 for better latency
- Set dalvik.vm.dex2oat-thread = 2
Complete changelog
https://www.androidfilehost.com/?w=files&flid=109853
SELinux for Nougat
SELinux in Nougat has been hardened to never allow text relocation for executables. This is the only rule that we had to relax to enable pre-KitKat blobs to run.
To enable SELinux Enforcing, do this from recovery
Code:
$ adb shell mount /data
$ adb shell touch /data/.selinux
$ adb shell umount /data
Known issues
- MHL not working
- Display freeze on Cast Screen disconnect
- Widevine DRM not working
Broken AOSP components
- Clock
- Browser2
- Music
- Webview
Installation
You need to have custom recovery that can flash multiple zip files without having the reboot. I personally use the official CWM 6.0.4.5 so the instructions will be based on that with no external SD.
>Coming from other ROMs
- wipe userdata/cache
- format /system
- apply ROM zip
- apply Gapps zip ...or more Gapps if using modular Gapps
- format /data and /data/media
- reboot
>Coming from the same ROM
- format /cache
- format /system
- apply ROM zip
- apply Gapps zip ...or more Gapps if using modular Gapps
- reboot
Recommended Gapps is OpenGapps stock. Default webview provider is Google WebView. Please make sure your Gapps include this. Attached you will see my Gapps config.
This is based on Grouper blobs, so as usual barcode/QR scanning will not work and will not consider this as bug. However, Grouper blobs works with Screen Cast, which for me, is more useful than barcode/QR code scanning.
Let the testing begin!!!:fingers-crossed::fingers-crossed::fingers-crossed:
Kernel
Kernel https://github.com/CyanogenMod/lge-kernel-p880/tree/cm-12.1
See attached for patches
Code:
commit 413b3fc527c086450f28acbe92893c71e73ad5b6
Author: demetris <[email protected]>
Date: Wed Nov 4 00:39:13 2015 +0200
Use "git am -3" for .patch files
Use "git apply" for .diff files.
Reserved another
Different installation hmmm Thanks for everything csk1jw
Use TWRP 3.0.2.0 and do the recommend wipes .Have the zip files on a EX sdcard.
By flashing get messages "unknow command log" in red letters
Try to install open gapps for 7.0 beta pico and get errorcode 20 .Witch gapps can i use ?
Flash without gapps and get also the messages in red letters,but
boot normally and it seems working good fast and smooth :good:
Try copy the zip files for gapps to intern sd.In recovery can flash gapps and webview,
clean dalvik/cache , reboot but cant not open playstore
Regards
Can anyone provide me touch recovery for flashing this ROM.
Also need gapps for this ROM, I am unable to access some sites in my country (Kingdom Of Saudi Arabia).
Please provide me touch recovery for this ROM and link for Gapps.
Edit: Attached CWM Touch Recovery v6.0.4.5
Anyone up for helping me????
Salman Al-Badgail said:
Anyone up for helping me????
Click to expand...
Click to collapse
Here is a link for gapps 7.0 stock:
https://www.dropbox.com/s/r4uxxnqkfcxvc6c/open_gapps-arm-7.0-stock-20160910.zip?dl=0
Here is the latest twrp recovery. Please confirm that this is a touch recovery, if it is. I'm sticking with CWM 6.0.4.5. and don't wanna flash TWRP now.
https://www.dropbox.com/s/rq4xiya446h0mgo/twrp-3.0.2-0-p880.img?dl=0
Phil_Smith said:
Here is a link for gapps 7.0 stock:
https://www.dropbox.com/s/r4uxxnqkfcxvc6c/open_gapps-arm-7.0-stock-20160910.zip?dl=0
Here is the latest twrp recovery. Please confirm that this is a touch recovery, if it is. I'm sticking with CWM 6.0.4.5. and don't wanna flash TWRP now.
https://www.dropbox.com/s/rq4xiya446h0mgo/twrp-3.0.2-0-p880.img?dl=0
Click to expand...
Click to collapse
@Phil _Smith
I use TWRP 3.0.2.0 .How get you the stock gapps to work? I can flash,but googleservices is not working !!
sourly64 said:
@Phil _Smith
I use TWRP 3.0.2.0 .How get you the stock gapps to work? I can flash,but googleservices is not working !!
Click to expand...
Click to collapse
I suggest you try CWM 6.0.4.5.
I remember that there always had been some problems with TWRP and AOSP-based ROMs.
---------- Post added at 07:27 PM ---------- Previous post was at 06:41 PM ----------
Is there any chance to get the xposed framework to work on this rom? Or is there simply no version available for android 7.0?
Phil_Smith said:
I suggest you try CWM 6.0.4.5.
I remember that there always had been some problems with TWRP and AOSP-based ROMs.
---------- Post added at 07:27 PM ---------- Previous post was at 06:41 PM ----------
Is there any chance to get the xposed framework to work on this rom? Or is there simply no version available for android 7.0?
Click to expand...
Click to collapse
Please do provide me CWM 6.0.4.5.
Thanks
Salman Al-Badgail said:
Please do provide me CWM 6.0.4.5.
Thanks
Click to expand...
Click to collapse
Here you are, sir! Hope you got adb working, as I only found this as an .img
(For myself I use Rom Manager).
https://www.dropbox.com/s/7kpdaoobfizmlum/cwm_6.0.4.5.img?dl=0
Edit: Ah, but I remember that flashing .img files is easy via twrp (a little bit ironic)
Phil_Smith said:
Here you are, sir! Hope you got adb working, as I only found this as an .img
(For myself I use Rom Manager).
https://www.dropbox.com/s/7kpdaoobfizmlum/cwm_6.0.4.5.img?dl=0
Click to expand...
Click to collapse
Thanks for providing me, many sites are blocked by govt here this is only the reason I am troubling you. Sorry.
Adb is working fine. Thanks again @Phil_Smith
---------- Post added at 11:16 PM ---------- Previous post was at 11:11 PM ----------
I found CWM Touch Recovery (6.0.4.5) HERE
I attached CWM Touch 6.0.4.5 (please do check)
Edit: Attachment Not working
Salman Al-Badgail said:
Thanks for providing me, many sites are blocked by govt here this is only the reason I am troubling you. Sorry.
Adb is working fine. Thanks again @Phil_Smith
---------- Post added at 11:16 PM ---------- Previous post was at 11:11 PM ----------
I found CWM Touch Recovery (6.0.4.5) HERE
Click to expand...
Click to collapse
No problem, I know - I read your previous post
Bluetooth does not work for me. The device is detected properly, but then there is no sound playing from my external audio speaker. Can anyone comfirm the Bluetooth issue?
Phil_Smith said:
Bluetooth does not work for me. The device is detected properly, but then there is no sound playing from my external audio speaker. Can anyone comfirm the Bluetooth issue?
Click to expand...
Click to collapse
Confirmed. Will investigate. Device paired and connected but no sound.
It is too slow on my device
fukuli053 said:
It is too slow on my device
Click to expand...
Click to collapse
Give it a couple of shots (that is reboots). At first nothing worked for me eighter, but it gets stable and really fast after like 4 restarts or so!
fukuli053 said:
It is too slow on my device
Click to expand...
Click to collapse
Well, it can't be. Nougat UX is faster than Marshmallow.
What's your Gapps installation?
UPDATED
Since these issues have been fixed in newer builds but as a s2 hd lte users, we have no option but to use older builds which have many issues. I found a workaround for them. If you are having wifi or other radio related issues, contact the ROM developer. This post can't help you. Flashing latest baseband helped me and could work well for you as well. Lets talk about two of the most common bug that haunts our device
1 Apps auto closing->( only for LMY48G builds,if you have newer builds,just flash gapps and reboot. to check go to about phone-> build number)
This is a webview related bug.
Download latest gapps from opengapps.org.
I prefer aroma installer as smaller packages don't have webview included,which will make the bugs worse.
Flash gapps. Dont forget to select 'android system webview' from the aroma installer.
Download the zip file from the
link
https://mega.nz/#!0d5Tiaja
Decryption key !JAG5Im-T75YN1CKIOiOcyDDaBH2ILD6dzwxw4xnhrBc
Extract "libwebviewchromium.so" and "libwebviewchromium_plat_support.so"
It is taken from stock samsung ROM and only works on armv7 devices.
Copy them to /system/libs using ESfile explorer or any other root explorer.
Overwrite the original file if asked.
give permission (-rw-r-r) to both file
Reboot to recovery
Flash this file "cm12.1 android system webview" from this thread(only for cm12.1, will cause bootloops in Xenon hd and resurrection remix)
http://forum.xda-developers.com/xperia-m/themes-apps/mod-google-android-webview-t3109216
Apps will now no longer auto close in your face without warning
((-> After testing for a month, I concluded that these steps are optional and use only if you want to have google android webview instead of cm12.1's built in 'android system webview'))
2) Now the most important part, random reboots.
This was reported on earlier builds of lollipop by many users.This is mostly caused by minfree that android uses to manage memory. If you navigate to sys/modules/lowmwemorykiller/parameters you can see 4 or 5 files. two of those files have wrong permissions. They are "adj" and "minfree".
If you give them (rw-r-r) permissions, you can adjust minfree values. the stock values are too aggressive and would cause constant reboots, freezes. Download romtoolbox, navigate to task manager, swipe left. you can choose to use any presets. i use 8,12,24,60,70,80 as minfree values.
Dont check "auto apply on boot" because you need to repeat this whole process after a reboot as those two files"adj and minfree" will be replaced from boot.img on boot by kern
Permanent fix: unpack boot.img. Navigate to ramdisc and open init.rc file in notepad. Find the line
chmod 0220 /sys/module/lowmemorykiller/parameters/minfree
chmod 0220 /sys/module/lowmemorykiller/parameters/adj
Change both values to 0644
save and close
Repack boot.img
Put it back inside the zipfile using winrar or use flashify from playstore to update boot.
I found tool to unpack qualcomm boot.img from this website. Full credits to the developer who made this tool.
http://www.droidbeep.com/how-to-unpa...-img-qualcomm/
download ROM toolbox and apply your preferred values
3. Low storage and optimizing apps(configuring ART compiler)
After google updated android runtime from JIT to ART, apps take up huge space and "optimizing app" takes forever. But there is workaround for that too.
1)Open build.prop in any text editor.
2) find these two lines:
dalvik.vm.image-dex2oat-filter=........(blah blah)
dalvik.vm.dex2oat-filter=...(blah blah)
3) Change both of these lines to
dalvik.vm.image-dex2oat-filter=speed
dalvik.vm.dex2oat-filter=Verify-none
If these lines doesn't exist, in your build.prop,you have to add them manually
4) save your build.prop file
5) reboot to recovery and wipe dalvik cache
After this check your storage space, You will have plenty of storage left and optimizing apps should be faster. It works just like old JIT compiler from older android versions.
if this doesn't work for you, you have to edit these same lines from default.prop by unpacking boot.img
I have fixed this issue by editing init.rc inside boot.img, but i dont know if i should post it here or not.
diabolicalprophecy said:
I have fixed this issue by editing init.rc inside boot.img, but i dont know if i should post it here or not.
Click to expand...
Click to collapse
please, for e120s
OIAUser said:
please, for e120s
Click to expand...
Click to collapse
Please extract Boot.img from the zip file and send it. I don't have boot.img for e120s, or i can tell you how to do it yourself if you are interested.
Tell me how, I'll try to do it myself.
I will be very grateful
any way to fix wifi & soft reboot on e120s ???
if you need log or any thign about my devices i will link it to you!!
OIAUser said:
Tell me how, I'll try to do it myself.
I will be very grateful
Click to expand...
Click to collapse
I have updated the post on how to do it. You can find the required tool here with detailed instructions
http://www.droidbeep.com/how-to-unpack-and-repack-boot-img-qualcomm/
kdlinh said:
any way to fix wifi & soft reboot on e120s ???
if you need log or any thign about my devices i will link it to you!!
Click to expand...
Click to collapse
You can try wiping phone efs through odin in order to fix radio issues
1 Download stock jb rom
2 Check "phone efs clear". This is most important.
3 Click pda
4 click start
5 wait for phone to boot up
6 go to settings->software update to check if you are running latest jb build. Soft reboots and radio issues are usually caused by old baseband version.
7 Proceed with usual old way to install lollipop.
This way odin will wipe your efs settings to rebuild from scratch.
still ploblem ??? :? wait how to clear efs
at first time i have checked this box but failded ,
kdlinh said:
still ploblem ??? :? wait how to clear efs
at first time i have checked this box but failded ,
Click to expand...
Click to collapse
you need Stock jb rom to do this. I also had this issue in e120l, but clearing phone efs fixed radio issues for me. you need odin3v 1.85 and samsung usb drivers.
You can find it alongside " phone bootloader update". Be careful not to select this one by accident.
diabolicalprophecy said:
you need Stock jb rom to do this. I also had this issue in e120l, but clearing phone efs fixed radio issues for me. you need odin3v 1.85 and samsung usb drivers.
You can find it alongside " phone bootloader update". Be careful not to select this one by accident.
Click to expand...
Click to collapse
i have checked this efs box but failed :crying::crying:
kdlinh said:
i have checked this efs box but failed :crying::crying:
Click to expand...
Click to collapse
which firmware did you tried this with? i have no problem doing this with astap 8 or stock jb rom for e120l.
http://i4khmers.blogspot.com/2015/09/official-firmware-samsung-galaxy-sii.html try this
its E120SKSJMH3 version
Once again, I read the instructions .. understand. But in the archive libraries are no libvebvievhromium .so file. "There's a file" libwebviewchromium_loader. "This is critical?
OIAUser said:
Once again, I read the instructions .. understand. But in the archive libraries are no libvebvievhromium .so file. "There's a file" libwebviewchromium_loader. "This is critical?
Click to expand...
Click to collapse
you get "libWebviechromium .so" file while installing gapps package. Go to opengapps.org and download aroma installer.
there are two files in the archive i uploaded, libwebviwechromium_loader.so and libwebviewplatsupport.so. You need to extract and replace those files in system-> libs after flashing gapps package. The built in webview will cause random apps shutdowns. this file is critical. You need libwebviewchromium_loader to start webview app. your system will not function properly without it.
diabolicalprophecy said:
which firmware did you tried this with? i have no problem doing this with astap 8 or stock jb rom for e120l.
http://i4khmers.blogspot.com/2015/09/official-firmware-samsung-galaxy-sii.html try this
its E120SKSJMH3 version
Click to expand...
Click to collapse
failed it still this error it seems like i stuck , have at least one error when i up rom to an open source cook rom
kdlinh said:
failed it still this error it seems like i stuck , have at least one error when i up rom to an open source cook rom
Click to expand...
Click to collapse
have you checked debugging option from developer options before doing this? Make sure your data cable is not faulty. please make sure you have a backup of efs partition if you are having network issues with all ROMs. try hellcat and stock based roms for testing to make sure you are not having this issue only on lollipop or kitkat. Also try to wipe boot from recovery menu before flashing.
diabolicalprophecy said:
have you checked debugging option from developer options before doing this? Make sure your data cable is not faulty. please make sure you have a backup of efs partition if you are having network issues with all ROMs. try hellcat and stock based roms for testing to make sure you are not having this issue only on lollipop or kitkat. Also try to wipe boot from recovery menu before flashing.
Click to expand...
Click to collapse
i means that when i up the stock based roms none of error found but when i up rom to cm11 cm10 hellkat miui cm12 & ressuction
ERROR at least found one in this open source rom
kdlinh said:
i means that when i up the stock based roms none of error found but when i up rom to cm11 cm10 hellkat miui cm12 & ressuction
ERROR at least found one in this open source rom
Click to expand...
Click to collapse
I also had this the same issue.
There is a link to latest baseband in hellkat thread. Thats where i got it. Sadly Its only for E120L
Search the hellkat thread to see if there is one for e120s as well.
I obviously didn't look further as i don't own e120s.
diabolicalprophecy said:
I also had this the same issue.
There is a link to latest baseband in hellkat thread. Thats where i got it. Sadly Its only for E120L
Search the hellkat thread to see if there is one for e120s as well.
I obviously didn't look further as i don't own e120s.
Click to expand...
Click to collapse
can you give me the links , at least what i can do now is tried to install your baseband
it will brick your phone. Its for E120L only