Can't boot to flash mode or recovery mode. - Sony Xperia ZR

I really need help.
I've got my phone bricked and I can't even boot to flash mode or to recovery mode.
The last thing I've done is boot to twrp and clear data because I am going to change rom. But there is a certain error that pops up. and forgot what was it. After that, I try to flash the rom. But the same error pops up. If I remember correctly. e:ex4ts is not found? Something like that? And now. When I turn on my phone. The xperia logo still pops up. Then after that its only black screen. I tried going to recovery (power + Vol up + vol down) and also tried flash mode but nothing really happens. Its like not being detected. And when I try to charge it. The xperia logo pops up and black screen appears. The charging icon/animation is not popping up. Is there anyway to fix this? Please help. Any help would be much appreciated. Thank you.

Your phone is now bricked and won't boot into recovery.You need to flash stock rom via flashtool to recover your phone.Is that your phone's bootloader Lock?Unable to boot into recovery always happen in locked bootloader phone.

Use Flashtool to flash stock rom. But be careful to connect phone only when prompted. It should boot after that, then you can root phone again and try to install recovery again.

I have unlocked bootloader already. I think there is something wrong with the phone. I can't boot to flash mode and recovery mode. The screen continues to go black light. I've tried for more than 20 times already. But still. I can't go to flash mode. Can I go to flash mode by only connecting my phone to my pc?

http://forum.xda-developers.com/showthread.php?t=1963961
use recovery img to flash via flashtool.you'll get your recovery back

Thank you so much for answering my query. I figured it out before reading this. Yes, I forgot how to use flashtool. I forgot how to boot into flash mode. I used the method in Samsung devices (All buttons must be pressed) which technically my mistake. Thanks again.

Related

[Q] Did I brick my SGS BT-I9000?

I Have a similar problem as posted by someone else - but I can't reply in that thread yet so here it is:
Also SGS GT-I9000 - now stuck on white logo screen.
What I have done:
- phone was slow and very laggy so I wanted to install new ROM
- found out that 3bc didn't work so tried to fix that using a guide from SamsungGalaxySforums based on one from XDA (tried to post the link, but forum rules won't let me).
- now download mode works but recovery mode still doesn't.
- when rebooting without being attached to laptop it showed funny coloured lines first
- I tried this whole thing again and now my phone is stuck on white logo screen. Still able to get into download mode and flash, but no booting phone.
Any ideas? Should I flash a different bootloader?
EDIT: I had tried the Aries_P-SBL.tar.md5 bootloader and only got coloured lines.
Now using the EZboot-GingerBread-1.0.tar.md5 bootloader and getting a bootloader screen. Now making a backup of all my data first.
EDIT: After backup still hangs at white Galaxy S screen - so still no working phone! Ideas?
Turn off your phone and reboot into the recovery mode by pressing Volume UP+ Home + Power.
Then when in the recovery, select Wipe Data and Cache. Reboot when done. You should be up and running. Also, first boot may take a while so be patient.
dhiru1602 said:
Turn off your phone and reboot into the recovery mode by pressing Volume UP+ Home + Power.
Then when in the recovery, select Wipe Data and Cache. Reboot when done. You should be up and running. Also, first boot may take a while so be patient.
Click to expand...
Click to collapse
It says in his post, recovery wont work, only download.
Sounds to me he has screwed up the bootloader.
Now you've done this http://forum.xda-developers.com/showthread.php?t=1089989
I now suggest you boot to download and flash a stock rom using ODIN.
just flash stock Rom using Odin and than you can flash what you want

I8200N soft bricked by selecting 'boot into recovery' in ROM manager.

Hello,
I foolishly selected boot into recovery mode in ROM manager hoping it would work and now my phone is soft bricked. It's suck at the boot logo. This phone doesn't have recovery mode only download mode. But I can't keep the phone on long enough because it powers off and goes back to the boot screen. I should add that when I plug it in the computer it goes off and vibrates but when I put it in the charging port in stays on. Help me please.
Hello.
Try use Odin next get into Downloadmode and load phillz recovery again.
How to use Odin look at This.
Good luck.
nalas said:
Hello.
Try use Odin next get into Downloadmode and load phillz recovery again.
How to use Odin look at This.
Good luck.
Click to expand...
Click to collapse
Thanks, I restored my phone.

i9305 bricked. Vol UP button broken: can't go to DL mode

Hello,
I tried to flash twrp on a stock i9305 through Odin.
It initially seemed unsuccessful (rebooting to stock recovery) until i rooted the phone and flashed twrp again.
From twrp i then tried to flash RR rom but it refused (don't remember detailed message). I decided to give up and reboot.
The phone stays stuck on samsung logo.
I removed the battery. Restarted with 'home+volDown+power'
All i can get is the screen telling me to press VolUP to flash a ROM. My issue is that the VolUP button does not work.
I tried to remove it and press with a pin to no avail.
I can't use adb (not recognized)
Odin sees the phone but can not flash anything as the phone is not in DL mode...
Any ideas ?
Thanks a lot!
xlcazale said:
Hello,
I tried to flash twrp on a stock i9305 through Odin.
It initially seemed unsuccessful (rebooting to stock recovery) until i rooted the phone and flashed twrp again.
From twrp i then tried to flash RR rom but it refused (don't remember detailed message). I decided to give up and reboot.
The phone stays stuck on samsung logo.
I removed the battery. Restarted with 'home+volDown+power'
All i can get is the screen telling me to press VolUP to flash a ROM. My issue is that the VolUP button does not work.
I tried to remove it and press with a pin to no avail.
I can't use adb (not recognized)
Odin sees the phone but can not flash anything as the phone is not in DL mode...
Any ideas ?
Thanks a lot!
Click to expand...
Click to collapse
I suggest to get a USB jig. I've always one at home. Bought mine on eBay for about 2€. Just search the web.
Thanks. Just looked it up. I'll give it a shot :good:

G973F Stuck on Boot Screen After Failed BeyondROM Install and TWRP 3.4.0-3 Flash

I believe i've royally screwed up and i want to know if there's anything I can do to save my phone.
I downloaded the latest BeyondROM from here after being on a previous version for about a year (not sure which one I was on):
https://forum.xda-developers.com/ga...evelopment-exynos/rom-beyondrom-v6-0-t4017921
I flashed the zip file through TWRP and only after flashing did I realize that I was on TWRP 3.3.1-11 and not 3.4.0-3, which I'm guessing is why my phone is now stuck on the boot logo when I boot it. I went back into TWRP and cleared the Dalvik & standard cache again after this but no dice.
But it gets worse. I then tried to upgrade to 3.4.0-3 by flashing it from TWRP 3.3.1-11 using the recovery partition, hoping to reflash the firmware after doing so.
After doing this and my phone rebooting, not only am I stuck on the boot screen, but now I can no longer enter recovery mode either by holding Bixby + Vol Up + Power. My phone isn't recognized by my PC or Odin now either.
Is my phone completely bricked, or is there a way to salvage this mess i've made?
Could really use some help.
Thanks guys.
If you can go to download mode, try re-flashing the stock Samsung firmware via Odin.
XTrail02 said:
If you can go to download mode, try re-flashing the stock Samsung firmware via Odin.
Click to expand...
Click to collapse
Thanks for the suggestion, however that's my primary issue. I can't get to download mode (which really should be recovery mode since I have TWRP).
Do you think it could be an issue with me rebooting to recovery mode after upgrading TWRP using TWRP itself? Maybe my phone needs to be hard powered off once to access TWRP again?
And since I have that failed ROM install, the only way to power off the phone would be to wait for the battery to drain.
Power+volume down+Brixby goes right into download mode bypassing the recovery
TheMassiveEffect said:
Power+volume down+Brixby goes right into download mode bypassing the recovery
Click to expand...
Click to collapse
My phone just keeps restarting when Power + vol down are held. Looks like draining the battery didn't help either. I'm stuck on the boot screen even when plugged in with 0% battery. When I remove the USB Cable and hold Vol down + Power, the phone seems to turn off because there's no battery, but immediately after plugging in a power cable, the phone automatically turns on by itself again.
You can try this, but best not to flash anything without charging battery first. You can charge while phone is off:

Doogee s68pro not booting up after magisk update, black screen. What can i do to fix this?

So, I recently updated magisk on my phone and as usual to update my phone restarts, but this time it didn't boot up.
I think its in bootloop because when i connect it to my pc with a usb cable it goes on and off also, i cannot access to TWRP.
Can you get to bootloader (fastboot)?
If so you can restore a stock boot image and start over, or try to boot to TWRP with fastboot boot twrp.img and restore the boot image from there and then flash the installer (rename the .apk to .zip as per the new v22+ installation instructions).
I am unable to go into the bootloader or maybe im just doing it the wrong way do you mind guiding me? :/
or maybe i don't have the drivers..
my phone just connects and disconnects, so im not so sure i can go into the bootloader and launch a comand.
Can you shutdown your phone?
i don't think, because it's always turning on and off because the usb sound is going off and on in my pc so i dont really know
You need to use a button combo to get to bootloader or recovery (since you can't boot to Android). A quick web search gives this:
https://droidrecovery.com/doogee-s68-pro-recovery-mode/
thameme said:
i don't think, because it's always turning on and off because the usb sound is going off and on in my pc so i dont really know
Click to expand...
Click to collapse
Exactly like what happen to my device as well
Nope, it does not let me go into the bootloader. Not even with the button combo.
Do you have twrp installed on your phone by any chance? Also a stock boot.img?
First you need to calm down I know how frustrating seeing your device on bootloop and can't even shutdown it ...
i do not have twrp, but i can download a stock boot.img
would you like me to guide you how to fix it i don't have anything to do?
Yes, thank you.
Your device is going on bootloop right now and keep vibrating right?
it's not vibrating. but it probably is in bootloop
lol mine is vibrating while on bootloop okay enough chitchat let's start
vibration is actually good indication for the next process
prepare ADB and USB cable
Now press Power Button and VOL UP at the same time wait for vibration let go Power Button keep holding VOL up for at least 3secs then let go
it's still not vibrating
now press VOL DOWN there's 3 out of 1 chance that you actually made it to fastboot mode ...

Categories

Resources