Looking for the right RUU for my HTC One (m7) - One (M7) Q&A, Help & Troubleshooting

I'm trying to revert back to the original version of android for my HTC M7 i tried so many RUU zip files but i think i'm not finding the right one for my phone. I'm not sure what to do, please help me !
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.151
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__M27
(bootloader) battery-status: good
(bootloader) battery-voltage: 4128mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks

whityxx said:
I'm trying to revert back to the original version of android for my HTC M7 i tried so many RUU zip files but i think i'm not finding the right one for my phone. I'm not sure what to do, please help me !
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.151
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__M27
(bootloader) battery-status: good
(bootloader) battery-voltage: 4128mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks
Click to expand...
Click to collapse
The relevant info when searching for a RUU in red (see above).
There is no 7.19.401.151 RUU available so you'll have to use the 7.19.401.102 and re-update to 7.19.401.151 after.
Since your phone is S-ON you'll need to change your version-main number from 7.19.401.151 to 7.19.401.102 so you can flash the RUU. Everything explained in the RUU collection thread (see sticky thread in the general section) under "how to downgrade with s-on" at post #2.

alray said:
The relevant info when searching for a RUU in red (see above).
There is no 7.19.401.151 RUU available so you'll have to use the 7.19.401.102 and re-update to 7.19.401.151 after.
Since your phone is S-ON you'll need to change your version-main number from 7.19.401.151 to 7.19.401.102 so you can flash the RUU. Everything explained in the RUU collection thread (see sticky thread in the general section) under "how to downgrade with s-on" at post #2.
Click to expand...
Click to collapse
I did as you suggested, and i successfully got my version-main to 7.19.401.102
But now when i try to flash zip i get this :
sending 'zip' (1552917 KB)...
FAILED (remote: 02 data length is too large)
finished. total time: 0.001s

whityxx said:
I did as you suggested, and i successfully got my version-main to 7.19.401.102
But now when i try to flash zip i get this :
sending 'zip' (1552917 KB)...
FAILED (remote: 02 data length is too large)
finished. total time: 0.001s
Click to expand...
Click to collapse
You used regular fastboot tool right? In order to flash 7.xx firmware, aka Lollipop, you need to use htc fastboot, because regular fastboot can't handle files bigger than 1.5 GB. Hence the error message
dey tuuk ur juurbs

donkeykong1 said:
You used regular fastboot tool right? In order to flash 7.xx firmware, aka Lollipop, you need to use htc fastboot, because regular fastboot can't handle files bigger than 1.5 GB. Hence the error message
dey tuuk ur juurbs
Click to expand...
Click to collapse
Hey thanks for the tip, it did the trick.
Thanks a lot !

whityxx said:
Hey thanks for the tip, it did the trick.
Thanks a lot !
Click to expand...
Click to collapse
You're welcome. Glad you sorted it out ?
dey tuuk ur juurbs

Related

Htc One - Soff hboot 1.55 , 3.57.401.500 Ruu error 155

Hi today I try to downgrade to stock rom whit ruu :
RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
my htc One is on S-OFF and have this is the info :
C:\Android\fastboot>fastboot.exe getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.55.0000
INFOversion-baseband: 4A.20.3263.30
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.57.401.500
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: MB332W901928
INFOimei: 35xxxxxxxxxxxxxx
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: HTC__405
INFObattery-status: good
INFObattery-voltage: 4030mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-6cad6811
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Click to expand...
Click to collapse
And my Phone is in relocked mode...
I try to flash ruu in fastboot mode but always read : ERROR 155 : ERROR UPGRADE IMAGE...
Any Help for this? probably is for fw version 3.57.401.500 instead 3.62.401.1.. I try whit this now..
Regards
Ha, you've obviously not read what I've posted lately!!
I had the exact same issue, so I flashed this HBOOT - http://d-h.st/qfc - and the RUU then flashed fine
(You flash the HBOOT ZIP in rebootRUU mode btw)
tk's you man..
work very fine now.. :good:
Best Regards
can you explain how to do this because i have same issue and i can not solve it
kimopiko said:
can you explain how to do this because i have same issue and i can not solve it
Click to expand...
Click to collapse
Woah, you don't need to ''scream'' that loud lol.
First describe your situation: what is the current status of your device, what is your goal.
and post the output of this command without IMEI/SN
Code:
fastboot getvar all
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT241W410135
(bootloader) imei: 359901042286639
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4039mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.064s
this i my phone info
i want to restore my phone to stock rom >>> i tried to use OTA_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_1.11.50.05.28_10.27.50.08L_release_301852xf01hejl416oev96 by fastboot but failed
i tried also to use RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed >>> it give me error 155
I have the same problem.
I have an AT&T HTC One. I am S-Off with HBoot 1.55 and running KK 4.4.2 (after OTA update). I am trying to restore it to factory default but the RRU keeps giving me error 155.
RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_Radio_4A.19.3263.13_10.38j.1157.04_release_334235_signed_2.exe
cidnum: CWS__001
modelid: PN0712000
product: m7_ul
version-bootloader: 1.56.0000
version-baseband: 4T.24.3218.09
I have tried locked, unlocked and re-locked with no success.
The Hboot above (1.44) seems to be the European version and fails to flash due to the mismatched model ID. I am trying flash it while in RRU mode:
C:\Temp\fastboot>fastboot flash zip orig_hboot_1.44.0000_M7_RUUmode.zip
sending 'zip' (486 KB)...
OKAY [ 0.248s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 0.661s
Any suggestions?
Thanks
Adrian
kimopiko said:
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT241W410135
(bootloader) imei: 359901042286639
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4039mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.064s
this i my phone info
i want to restore my phone to stock rom >>> i tried to use OTA_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_1.11.50.05.28_10.27.50.08L_release_301852xf01hejl416oev96 by fastboot but failed
i tried also to use RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed >>> it give me error 155
Click to expand...
Click to collapse
You have HTC ONE S aka Ville not M7, you are in wrong thread.
1) you can't flash OTA via fastboot
2) you are usting wrong RUU try this one
---------- Post added at 09:41 AM ---------- Previous post was at 09:34 AM ----------
agoyeneche said:
I have the same problem.
I have an AT&T HTC One. I am S-Off with HBoot 1.55 and running KK 4.4.2 (after OTA update). I am trying to restore it to factory default but the RRU keeps giving me error 155.
RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_Radio_4A.19.3263.13_10.38j.1157.04_release_334235_signed_2.exe
cidnum: CWS__001
modelid: PN0712000
product: m7_ul
version-bootloader: 1.56.0000
version-baseband: 4T.24.3218.09
I have tried locked, unlocked and re-locked with no success.
The Hboot above (1.44) seems to be the European version and fails to flash due to the mismatched model ID. I am trying flash it while in RRU mode:
C:\Temp\fastboot>fastboot flash zip orig_hboot_1.44.0000_M7_RUUmode.zip
sending 'zip' (486 KB)...
OKAY [ 0.248s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
FAILED (remote: 41 model id check fail)
finished. total time: 0.661s
Any suggestions?
Thanks
Adrian
Click to expand...
Click to collapse
Edit android-info file inside of ZIP
kotag82 said:
You have HTC ONE S aka Ville not M7, you are in wrong thread.
1) you can't flash OTA via fastboot
2) you are usting wrong RUU try this one
---------- Post added at 09:41 AM ---------- Previous post was at 09:34 AM ----------
Edit android-info file inside of ZIP
Click to expand...
Click to collapse
Actually the problem is that you on 1.56 FW and you cannot downgrade it to stock.
you have to downgrade the hboot to 1.44 - BUT you have to be S-Off'ed
use this guide http://forum.xda-developers.com/showthread.php?t=2541082
oksagi said:
Actually the problem is that you on 1.56 FW and you cannot downgrade it to stock.
you have to downgrade the hboot to 1.44 - BUT you have to be S-Off'ed
use this guide http://forum.xda-developers.com/showthread.php?t=2541082
Click to expand...
Click to collapse
Yes we know that, thanks for quoting me but problem is somewhere else
Sent from my HTC One using xda premium
kotag82 said:
Yes we know that, thanks for quoting me but problem is somewhere else
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
you can use the hboot in my guide: http://forum.xda-developers.com/showthread.php?t=2541082 (post #2)
i've already edited it include most MIDs and CIDs
Code:
modelid: PN0710000
modelid: PN0711000
modelid: PN0712000
modelid: PN0713000
modelid: PN0714000
modelid: PN071****
cidnum: 11111111
cidnum: BM___***
cidnum: BS_US***
cidnum: CHT__***
cidnum: CWS__***
cidnum: GOOGL***
cidnum: H3G__***
cidnum: HTC__***
cidnum: O2___***
cidnum: OPTUS***
cidnum: ORANG***
cidnum: ROGER***
cidnum: TELST***
cidnum: TELUS***
cidnum: T-MOB***
cidnum: VODAP***
mainver: 1.29.401.12
btype:1
aareport:1
hbootpreupdate:3
EDIT: or use RUU.ZIP method, remember (both methods) will not work with Win8.1!!
kotag82 said:
---------- Post added at 09:41 AM ---------- Previous post was at 09:34 AM ----------
Edit android-info file inside of ZIP
Click to expand...
Click to collapse
Awesome, than you very much, it worked like a champ.
I was able to revert to HBoot 1.44 and RRU worked fine after.
:laugh::good:
please heeeeeeeeeeeeeeeeeeeeeeelp
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA34CW904354
(bootloader) imei: 354436050847241
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4335mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b0a25cb2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.074s
i use ruu and get error 155
please heeeelp
I have the same error (155) while flashing RUU
my getvar info is below :
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
) imei: ;;;;;;;;;;;;;;;;;
(bootloader) meid: ;;;;;;;;;;;;;;;;
(bootloader) product: m7_wls
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0720000
(bootloader) cidnum: SPCS_001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4227mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.077s
please tell me how can i able to flash RUU , i was try prevoious this one RUU RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_rel
AjdinKuduzovic said:
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4335mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-b0a25cb2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.074s
i use ruu and get error 155
please heeeelp
Click to expand...
Click to collapse
First edit by post and remove S/N and IMEI.. You cant't use this RUU ( your phone has branded - CID ORANGE001 and S-ON ). Use the method adb sideload or adb push http://forum.xda-developers.com/showthread.php?t=2318497
Mutasek24 said:
First edit by post and remove S/N and IMEI.. You cant't use this RUU ( your phone has branded - CID ORANGE001). Use the method adb sideload or adb push http://forum.xda-developers.com/showthread.php?t=2318497
Click to expand...
Click to collapse
but i cant enter recovery mode i tried flash it again but still bootloop on htc one logo
AjdinKuduzovic said:
but i cant enter recovery mode i tried flash it again but still bootloop on htc one logo
Click to expand...
Click to collapse
fastboot erase cache
Mutasek24 said:
fastboot erase cache
Click to expand...
Click to collapse
i tried it but no luck
can you tell me witch ruu is for my htc one
AjdinKuduzovic said:
i tried it but no luck
can you tell me witch ruu is for my htc one
Click to expand...
Click to collapse
You must have bootloader unlocked ( not relocked/locked ). When it comes about RUU isn't such for your CID...( remains the only nandroid backup or guru reset)
Mutasek24 said:
You must have bootloader unlocked ( not relocked/locked ). When it comes about RUU isn't such for your CID...( remains the only nandroid backup or guru reset)
Click to expand...
Click to collapse
i have all ready unlock bootloader unlocked its still bootloop oh htc one logo

cant flash RUU need help,

I am working on reverting my m7 to stock out of the box condition and am having some trouble flashing the stock att ruu zips and exe files and I dont know why, just fails ( allot of times after android info... my MID and CID are both stock CWS__001 and PN0712000 respectivly, I read somewhere that that MID is for the GPE, so I checked on the back of my phone and thats my stock MID for my sense phone...
here are my vars...
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3985mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
also how do I make "dirty" go away in the " commitno-bootloader" section?
When I use ruus matching my config i get this error "Invalid sparse file format at header magi"
THC Butterz said:
I am working on reverting my m7 to stock out of the box condition and am having some trouble flashing the stock att ruu zips and exe files and I dont know why, just fails ( allot of times after android info... my MID and CID are both stock CWS__001 and PN0712000 respectivly, I read somewhere that that MID is for the GPE, so I checked on the back of my phone and thats my stock MID for my sense phone...
here are my vars...
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3985mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
also how do I make "dirty" go away in the " commitno-bootloader" section?
Click to expand...
Click to collapse
Remove your IMEI number and serial number from your first post.
Just use this to return to stock by @clsA put TWRP recovery on your phone, do a full wipe, push or sideload the zip file to your internal storage and then flash it.
http://www.htc1guru.com/dld/guru_reset_m7_5-12-502-2_clsa-zip/
You don't get rid of dirty, its normal, they all say that.
THC Butterz said:
I am working on reverting my m7 to stock out of the box condition and am having some trouble flashing the stock att ruu zips and exe files and I dont know why, just fails ( allot of times after android info... my MID and CID are both stock CWS__001 and PN0712000 respectivly, I read somewhere that that MID is for the GPE, so I checked on the back of my phone and thats my stock MID for my sense phone...
here are my vars...
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4M.27.3218.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.12.502.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT38WW902359
(bootloader) imei:
(bootloader) meid:
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3985mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1f512bb6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
also how do I make "dirty" go away in the " commitno-bootloader" section?
When I use ruus matching my config i get this error "Invalid sparse file format at header magi"
Click to expand...
Click to collapse
Which RUU do you want to flash. A link would be great :good:
I tried to flash every att ruu I could find, but I got it done, had to find a decrypted one, and extract it, then re insert and flash it piece by piece, radio, recovery, hboot, system... etc thanks for the replies, especially the imei/sn comment, forgot that was in the vars, made me check another post i made yesterday too :good:
THC Butterz said:
I tried to flash every att ruu I could find, but I got it done, had to find a decrypted one, and extract it, then re insert and flash it piece by piece, radio, recovery, hboot, system... etc thanks for the replies, especially the imei/sn comment, forgot that was in the vars, made me check another post i made yesterday too :good:
Click to expand...
Click to collapse
in all honesty, you should of just found the firmware matching the RUU you were trying to flash and flashed that first as you are s-off, you've pretty much done that just manually, glad you got it sorted though :good:

Ruu main 7.19.401.30

hello im trying to find a ruu can anyone help iv found this link http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944/page32 but keep getting error can not load any ideas thanks
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.30
(bootloader) version-misc: PVT SHIP S-ON
(bootloader)
(bootloader)
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3737mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
bygrave said:
hello im trying to find a ruu can anyone help iv found this link http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944/page32 but keep getting error can not load any ideas thanks
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.30
(bootloader) version-misc: PVT SHIP S-ON
(bootloader)
(bootloader)
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 3737mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
can any see were im going wrong that is the correct ruu.zip is it not
It clearly says on the thread 7.19.401.30 is combined RUU for s-off only. Your phone is s-on, so you can't use it
bygrave said:
can any see were im going wrong that is the correct ruu.zip is it not
Click to expand...
Click to collapse
donkeykong1 said:
It clearly says on the thread 7.19.401.30 is combined RUU for s-off only. Your phone is s-on, so you can't use it
Click to expand...
Click to collapse
Exactly, ruu with "combined" in the file name can't be flashed on s-on devices. It is said on page 1 of that thread but not directly in the post where the link where originally shared (but explained in the post below that one)
And btw when you get a "can not load" error when using fastboot its simply because fastboot can't find the file, either because you are typing it wrong or because the file isn't in the same folder as fastboot.exe. Anyway you'll get a "signature verification fail" if trying to flash this one on a s-on phone. Unfortunately, there is no 7.19.401.30 RUU for s-on yet. You might want to search for a nandroid backup of 7.19.401.30 instead so you can restore it using a custom recovery, then you can flash the stock 7.19.401.30 recovery so your phone will be stock except for the unlocked bootloader.
alray said:
Exactly, ruu with "combined" in the file name can't be flashed on s-on devices. It is said on page 1 of that thread but not directly in the post where the link where originally shared (but explained in the post below that one)
And btw when you get a "can not load" error when using fastboot its simply because fastboot can't find the file, either because you are typing it wrong or because the file isn't in the same folder as fastboot.exe. Anyway you'll get a "signature verification fail" if trying to flash this one on a s-on phone. Unfortunately, there is no 7.19.401.30 RUU for s-on yet. You might want to search for a nandroid backup of 7.19.401.30 instead so you can restore it using a custom recovery, then you can flash the stock 7.19.401.30 recovery so your phone will be stock except for the unlocked bootloader.
Click to expand...
Click to collapse
yes thank u for the well detailed reply, i s,off all my devices first thing i do i do,,but this device is my 9 year old daughter and she dont really need 2 b s,off but wot im trying to figure out is that both camera av got black when trying 2 open so im trying 2 work out weather it a hardware or soft ware fault find it weird that both have gone,,so deciding weather 2 s,off £23 and c if it a hard boot fault ,,or buy 2 new camera and fit them,,
Did you try some 3rd party camera apps?
donkeykong1 said:
Did you try some 3rd party camera apps?
Click to expand...
Click to collapse
yes tried everything poss,,iv just bought 1 off ebay 4 £26 with broken lcd so ill just pop the motherboard in to it thanks anyway
I seem to have the undoable as well can I be of any assistance? Or vice versa
CProgram Files (x86)Minimal ADB and Fastbootfastboot getvar all
(bootloader) version 0.5
(bootloader) version-bootloader 1.61.0000
(bootloader) version-baseband 4T.35.3218.16
(bootloader) version-cpld None
(bootloader) version-microp None
(bootloader) version-main 7.19.401.30
(bootloader) version-misc PVT SHIP S-ON
(bootloader) serialno FA34VW911700
(bootloader) imei 354400000000000
(bootloader) meid 00000000000000
(bootloader) product m7_ul
(bootloader) platform HBOOT-8064
(bootloader) modelid PN071
(bootloader) cidnum 11111111
(bootloader) battery-status good
(bootloader) battery-voltage 4142mV
(bootloader) partition-layout Generic
(bootloader) security on
(bootloader) build-mode SHIP
(bootloader) boot-mode FASTBOOT
(bootloader) commitno-bootloader dirty-0e2a13e5
(bootloader) hbootpreupdate 11
(bootloader) gencheckpt 0
all Done!
finished. total time 0.075s

[Q] Restoring Phone to default factory including os

I got a HTC ONE M7 O2 UK. I fully unlocked and installed ROM ViperOne.
Today I want to sell my phone and put it back everything where it was or including better. I had bad experience with ViperOne, so I want WWE last ROM.
I went to htc1guru and got the lastest RRU, but everytime I try to upgrade it, it get stuck on "Sending...".
Was thinking thats maybe because I'm trying to downgrade and isnt possible. but when it starts it says 1.9.401.2 or something like that, and the one im trying to installe it seems latest version over the one I have.
So what I should do? I tryed opening the RUU and get the rom.zip from temp folder and put it on the card but it says its corrupted, redownloaded it again and same thing.
Im doing something wrong? Or whats the best thing I can do ?
S-OFF device CID 02 001
os 2.24.206.7
Greetings
Stefanot04 said:
I got a HTC ONE M7 O2 UK. I fully unlocked and installed ROM ViperOne.
Today I want to sell my phone and put it back everything where it was or including better. I had bad experience with ViperOne, so I want WWE last ROM.
I went to htc1guru and got the lastest RRU, but everytime I try to upgrade it, it get stuck on "Sending...".
Was thinking thats maybe because I'm trying to downgrade and isnt possible. but when it starts it says 1.9.401.2 or something like that, and the one im trying to installe it seems latest version over the one I have.
So what I should do? I tryed opening the RUU and get the rom.zip from temp folder and put it on the card but it says its corrupted, redownloaded it again and same thing.
Im doing something wrong? Or whats the best thing I can do ?
S-OFF device CID 02 001
os 2.24.206.7
Greetings
Click to expand...
Click to collapse
Hi, please post the output of "fastboot getvar all" (hide your imei and serialno before posting)
alray said:
Hi, please post the output of "fastboot getvar all" (hide your imei and serialno before posting)
Click to expand...
Click to collapse
I cant, everytime I try i get "waiting for device"
Stefanot04 said:
I cant, everytime I try i get "waiting for device"
Click to expand...
Click to collapse
is your phone in bootloader ---> fastboot usb mode ?
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.206.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3931mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Stefanot04 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.206.7
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3931mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
1-Change your CID:
Code:
fastboot oem writecid HTC__001
fastboot reboot-bootloader
2-Update your firmware
Code:
fastboot oem rebootRUU
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot reboot-bootloader
3-Flash the 7.19.401.51 RUU:
Code:
fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.51_Radio_4T.35.3218.16_10.33Q.1718.01L_release_458803_signed.zip
fastboot reboot
4-Sell your phone as an up-to-date WWE M7
* You must use htc_fastboot.exe to flash the ruu (htc_fastboot flash zip ruu.zip). Just save htc_fastboot.exe in the same folder you already have adb.exe and fastboot.exe on your computer.
PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.51_Radio_4T.35.3218.16_10.33Q.1718.01L_release_458803_signed.zip
M7_UL_Firmware_7.19.401.2.zip
htc_fastboot.exe​
DONE, thank you very much.
User will be able to do OTA updates?
Greetings
Stefanot04 said:
DONE, thank you very much.
User will be able to do OTA updates?
Greetings
Click to expand...
Click to collapse
yes
Hi
Hi I'm back, got another HTC One, tried the same and Im getting an error. Cant continue.
After fastboot oem rebootRUU when I try to flash the zip I get error 99 unknown.
getvar info (OF NEW PHONE HERE)
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3947mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s
Click to expand...
Click to collapse
I was trying to S-OFF.
The idea was to put device on s-off, install everything I need, and install:
*PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.51_Radio_4T.35.3218.16_10.33Q.1718.01L_release_458803_signed
*M7_UL_Firmware_7.19.401.2
Like I did for my old htc one. (this post)
Now Im stuck on HTC One white screen. (every time I do a normal boot I get that screen, cant load phone back after installing super su via TWRP (was trying to s-off it)), only to bootloader menu access.
(Apart from this I tried to Soff it using firewater... i get till adb push firewater... then adb shell.. till there excellent... then.. su enter and it says su not found.. so i jump that step and continue with chmod 755 /data/local/tmp/fire till there ok.. then the next command /data/local/tmp/fire and it says sintax error... while its perfectly fine.. expecting ")"... so well. I cant soff it.. tried all day... neigher doing what it says on the post... only trying to leave the phone on the last firmware update.)
Thanks in advance
Stefanot04 said:
Hi I'm back, got another HTC One, tried the same and Im getting an error. Cant continue.
After fastboot oem rebootRUU when I try to flash the zip I get error 99 unknown.
getvar info (OF NEW PHONE HERE)
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3947mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s
I was trying to S-OFF.
The idea was to put device on s-off, install everything I need, and install:
*PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.51_Radio_4T.35.3218.16_10.33Q.1718.01L_release_458803_signed
*M7_UL_Firmware_7.19.401.2
Like I did for my old htc one. (this post)
Now Im stuck on HTC One white screen. (every time I do a normal boot I get that screen, cant load phone back after installing super su via TWRP (was trying to s-off it)), only to bootloader menu access.
(Apart from this I tried to Soff it using firewater... i get till adb push firewater... then adb shell.. till there excellent... then.. su enter and it says su not found.. so i jump that step and continue with chmod 755 /data/local/tmp/fire till there ok.. then the next command /data/local/tmp/fire and it says sintax error... while its perfectly fine.. expecting ")"... so well. I cant soff it.. tried all day... neigher doing what it says on the post... only trying to leave the phone on the last firmware update.)
Thanks in advance
Click to expand...
Click to collapse
You don't need soff to flash a ruu on this phone. If you absolutely want s-off your must use Sunshine S-off (25$ USD) , firewater is discontinued, will not work even if you have the file, it need online resources that are not available anymore to do its magic. And even if it was still working, you can't just skip some steps like that... Firewater was designed to work when booted in a rooted rom and all steps was required. Relock the bootloader and flash a 7.19.401.x ruu using htc_fastboot.exe.
Sent from my HTC One using XDA Labs
alray said:
You don't need soff to flash a ruu on this phone. If you absolutely want s-off your must use Sunshine S-off (25$ USD) , firewater is discontinued, will not work even if you have the file, it need online resources that are not available anymore to do its magic. And even if it was still working, you can't just skip some steps like that... Firewater was designed to work when booted in a rooted rom and all steps was required. Relock the bootloader and flash a 7.19.401.x ruu using htc_fastboot.exe.
Sent from my HTC One using XDA Labs
Click to expand...
Click to collapse
open cmd, wrote htc_fastboot zip europe.zip
and got
C:\Users\Tefa\AppData\Local\Android\android-sdk\platform-tools>htc_fastboot flas
h zip oficialeurope.zip
sending 'zip'... (50228 KB) OKAY
sending time = 3.078 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
Execution time is 8(s)
Click to expand...
Click to collapse
(already locked bootloader)
Here its a get var.
C:\Users\Tefa\AppData\Local\Android\android-sdk\platform-tools>fastboot getvar a
ll
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH34JW906050
(bootloader) imei: 354436055366916
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3835mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
Click to expand...
Click to collapse
Greetings
Stefanot04 said:
open cmd, wrote htc_fastboot zip europe.zip
and got
C:\Users\Tefa\AppData\Local\Android\android-sdk\platform-tools>htc_fastboot flas
h zip oficialeurope.zip
sending 'zip'... (50228 KB) OKAY
sending time = 3.078 secs
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
Execution time is 8(s)
(already locked bootloader)
Here its a get var.
C:\Users\Tefa\AppData\Local\Android\android-sdk\platform-tools>fastboot getvar a
ll
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.29.3218.08
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH34JW906050
(bootloader) imei: 354436055366916
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3835mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s
Greetings
Click to expand...
Click to collapse
Was the phone in ruu mode (black screen + silver htc logo)?
Sent from my HTC One using XDA Labs
alray said:
Was the phone in ruu mode (black screen + silver htc logo)?
Sent from my HTC One using XDA Labs
Click to expand...
Click to collapse
Done, thanks.
Update in minutes to confirm succesful flash.
Stefanot04 said:
Done, thanks.
Update in minutes to confirm succesful flash.
Click to expand...
Click to collapse
Edit: Perfect. Thanks

Htc One m7: Help Needed!

Hello fellas,
While i was trying to install new "Custom Rom" on my htc, obviously i was with s-on, so for som reason i deleted the original firmware, and now the phone wont boot..
So my question is can someone help me, please?
todorov.drago1 said:
Hello fellas,
While i was trying to install new "Custom Rom" on my htc, obviously i was with s-on, so for som reason i deleted the original firmware, and now the phone wont boot..
So my question is can someone help me, please?
Click to expand...
Click to collapse
Post your "fastboot getvar all" output, but delete your IMEI and serial no. And post your exact recovery version
donkeykong1 said:
Post your "fastboot getvar all" output, but delete your IMEI and serial no. And post your exact recovery version
Click to expand...
Click to collapse
C:\Android\sdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.51
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3859mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.084s
My recovery is CMW 6.0.4.6-m7ul
todorov.drago1 said:
C:\Android\sdk>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.51
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__102
(bootloader) battery-status: good
(bootloader) battery-voltage: 3859mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.084s
My recovery is CMW 6.0.4.6-m7ul
Click to expand...
Click to collapse
What rom are you trying to flash? I would recommend you to get rid of CWM and use TWRP to reflash your rom, that will probably fix your problem.
alray said:
What rom are you trying to flash? I would recommend you to get rid of CWM and use TWRP to reflash your rom, that will probably fix your problem.
Click to expand...
Click to collapse
Well I'm trying to go stock again if its possible.
Will TWRP fix this, ill try it ?
By the way I'm s-on so no custom rom for me, now atleast I know that.
todorov.drago1 said:
Well I'm trying to go stock again if its possible.
Will TWRP fix this, ill try it ?
By the way I'm s-on so no custom rom for me, now atleast I know that.
Click to expand...
Click to collapse
You don't need s-off to flash custom roms.... only an unlocked bootloader and the correct custom recovery version.
If you want to back to stock then you'll have to flash the 7.19.401.51 RUU
alray said:
You don't need s-off to flash custom roms.... only an unlocked bootloader and the correct custom recovery version.
If you want to back to stock then you'll have to flash the 7.19.401.51 RUU
Click to expand...
Click to collapse
Ok I tried to flash this RUU, it is the correct I guess.. http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944/page3
But it says :
invalid sparse file format at header magi.. what does that mean? I think that the RUU.zip is too big I guess ? or I don't know
Ok I was able to get past that, but now I've got another problem when I enter TWRP/CMW I get this messege :
Unable to mount partition path /sd card..
and I think that this kinda screws up my RUU installation now. So what is the fix for that if there is any ?

Categories

Resources