Hi everyone, I just bought a P9, nice and shiny I love it. I easily unlock bootloader and I wanted to root but I had some issues with TWRP and ... I deleted System by mistake.
Now I'm tying to repair it without success. I tried with HiSuite, but it says that the phone is not supported. Any ideas ?
thanks
Restore the stock recovery and then you can do a factory reset.
tnhh said:
Restore the stock recovery and then you can do a factory reset.
Click to expand...
Click to collapse
That I tried. I just end up with the big red "!" in the circle. It seems that there's is nothing to reset. Like no system
Any other ideas ? Is there a way to flash a full firmware ? I couldn't find The P9 firmware
for the same mistake i supported another user in a german android forum yesterday.
what model do you have? EVA-09 (single sim) or EVA-19 (dual sim) or any other chinese variant?
if you have EVA-09 you could try my TWRP backup and restore the partitions you deleted.
https://drive.google.com/open?id=0B9gJ44ME0ZkcWFlNdXZKdjdfZmc
paratox said:
for the same mistake i supported another user in a german android forum yesterday.
what model do you have? EVA-09 (single sim) or EVA-19 (dual sim) or any other chinese variant?
if you have EVA-09 you could try my TWRP backup and restore the partitions you deleted.
Click to expand...
Click to collapse
Thank I try that and I get back to you :good:
It seemed to work at first, but i'm in the BootLoop. I wiped dalvik and cache on TWRP and even did a factory reset on stock. I need help getting out of the loop. System seems to be restored anyway. Thank you again for your solutions
tricknaah said:
It seemed to work at first, but i'm in the BootLoop. I wiped dalvik and cache on TWRP and even did a factory reset on stock. I need help getting out of the loop. System seems to be restored anyway. Thank you again for your solutions
Click to expand...
Click to collapse
what model variant do you have? maybe also try to restore the cust partition, but only if you have the EVA-L09.
if i remember correctly the boot.img from my backup is already superSU patched. try to flash superSU 2.65 after restoring the backup. maybe the bootloop is because half installed superSU.
I get a message in log "unable to locate partition by backup name 'cust'
What I did:
1) Restored the backup in TWRP (system + boot)
2) flashed superSU 2.65
3) Wiped Dalvik + cache
4) Wiped Data
5) Reboot
But I'm still stuck in bootlop.
@paratox, I found the german forum, it was a pretty fast success. I'm maybe doing something wrong here.
And Yes I'm on EVA-L09 too
tricknaah said:
I get a message in log "unable to locate partition by backup name 'cust'
What I did:
1) Restored the backup in TWRP (system + boot)
2) flashed superSU 2.65
3) Wiped Dalvik + cache
4) Wiped Data
5) Reboot
But I'm still stuck in bootlop.
@paratox, I found the german forum, it was a pretty fast success. I'm maybe doing something wrong here.
And Yes I'm on EVA-L09 too
Click to expand...
Click to collapse
do you use paulobriens (modaco) TWRP? the other one i think does not support cust partition.
i would try:
1. paulobriens twrp -> restore boot and system
2. flash superSU
3. reboot
4. if bootloop boot into bootloader
5. flash stock recovery
6. boot into stock recovery and do a factory reset
Can You share the twrp recovery img you used ?? paulobriens (modaco) TWRP I found on his website is a test and does not start on my phone after successful flash
this is strange, it should boot. on my EVA-L09 C900 it is working.
maybe do a "fastboot erase cache" before and after twrp fastboot flash. then switch the phone off, remove usb cable and boot into recovery.
paratox said:
this is strange, it should boot. on my EVA-L09 C900 it is working.
maybe do a "fastboot erase cache" before and after twrp fastboot flash. then switch the phone off, remove usb cable and boot into recovery.
Click to expand...
Click to collapse
can you share your recovery img ? "fastboot erase cache" produce a command not allowed. :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i used both recoveries from this site and both are working on mine.
redownload the modaco one, unzip it and flash it again.
or use the other one and try what i wrote.
paratox said:
i used both recoveries from this site and both are working on mine.
redownload the modaco one, unzip it and flash it again.
or use the other one and try what i wrote.
Click to expand...
Click to collapse
Alright, I try that again
@paratox I tried again. The second TWRP is not working and put me in loop, even though it installs.
I was able to perform the factory reset, but bootloop again. I'm a bit desperate. I've owned multiple devices until this P9, I've never been in that situation. aweful !!
I hope someone bring me a solution. I really like the phone :s
you get a bootloop when trying to boot into recovery?
you have to boot into recovery without usb attached. hold power and vol- until the bootloader warning (yellow font, not as many options like normal booting) appears then release the both buttons. then wait until twrp appears.
Thank you @paratox I finally got it !! You help a lot on this one, and another great help as well I thank him too. :highfive:I won't forget to back up next time. I'll take some time to write about what I did in case someone else find itself in trouble with all this. I guess it might be useful .
Thank you guys !! Long day, I need to sleep:laugh::laugh::laugh::laugh::laugh:
@tricknaah: how to fix it?
I have the same problem with modaco recovery bootloop
freak3000 said:
@tricknaah: how to fix it?
I have the same problem with modaco recovery bootloop
Click to expand...
Click to collapse
Hi,
1) flashed TWRP 3.0.0, the other one wasn't working
2) Wiped everything, cache, data, Dalvik, and even System
3) I was provided a link for EVA-L19_C185B130_Middle_East_Region_Android_6.0_EMUI_4.1
3) extracted system.img, boot.img, cust.img and even userdata that I flashed everything (fastboot) with Huawei Extractor
4) After reboot, I got the update circle I guess , and It just fired up Like WOW, better than the first time
I'm not sure all that was neccessary, but yeah It actually worked
I hope it helps! :highfive:
paratox said:
for the same mistake i supported another user in a german android forum yesterday.
what model do you have? EVA-09 (single sim) or EVA-19 (dual sim) or any other chinese variant?
if you have EVA-09 you could try my TWRP backup and restore the partitions you deleted.
https://drive.google.com/open?id=0B9gJ44ME0ZkcWFlNdXZKdjdfZmc
Click to expand...
Click to collapse
Hi, I have the same problem. I have two Huawei P9. One is L19 and the other is L09.
My L19 is the C900
My L09 I do not remember what it is ... the problem is that it is no system, it only turns on fastboot recovery mode. I've tried combo keys with dload but it does not work or does not recognize. By Hisuite says that the model is not supported. Finally I tried the Firmware Update program hauuk user https://forum.xda-developers.com/p9-plus/development/huawei-p9-p9-plus-firmware-updater-t3435878 I used several options inside the L09 option in the middle Of the installation gives error.
I need to find a way to enable the OEM so I can flash boot.img, recovery.img and system.img because I can not flash anything because it gives the Not Allowed command.
The status is Bootloader locked and FRP locked.
I do not know what to do, I have no ideas.
Related
0x00 Preparation
Here are something you will need.
1. HTC Driver
2. adb & fastboot
PC:
Install HTC Driver the decompress ADB-Windows.zip.
Phone:
Go to (Settings -> About -> Software information -> More -> Build number), Tap it 7 times to enable developer options.
Go to (Settings -> Developer options), Check OEM unlocking and USB debugging options.
PC:
Go to ADB-Windows folder and hold Shift + Right Mouse Click the click open command windows here.
Input the command below to test adb function.
Code:
adb devices
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
0x01 Unlock Bootloader
Input the command to reboot to download mode.
Code:
adb reboot download
Download mode is same as fastboot in bootloader on old devices, so you must to do UNLOCK, FLASH or RUU in download mode.
Go to HTCdev website to unlock bootloader, you can search many guides on Google.
0x02 Flash TWRP Recovery
TWRP 3.0.2-0
Reboot to download mode and flash recovery.
Code:
adb reboot download
fastboot flash recovery twrp-3.0.2-0-e56ml.img
After flash recovery, reboot to bootloader then BOOT TO RECOVERY MODE.
0x03 Format Data
Wipe -> Format Data -> type yes to format data
Please reboot to recovery after formatting.
0x04 Install SuperSU
Please download SuperSU v2.78, i've test this version and work like a charm.
Before flashing su, please ensure that BOOT image is stock.
Looks good. Have to questions: Will that also work for the DualSim version?
Is the TWRP not the test version, where need a password?
Thx a lot.
Sent from my LG-H961N using XDA-Developers mobile app
schuertzi said:
Looks good. Have to questions: Will that also work for the DualSim version?
Is the TWRP not the test version, where need a password?
Thx a lot.
Sent from my LG-H961N using XDA-Developers mobile app
Click to expand...
Click to collapse
I have tested on dual-sim device (Taiwanese model) but single-sim devices, need volunteer to test it.
In this situation TWRP will request password, stock BOOT and boot into android once, in the meanwhile userdata will be encrypted.
BUT you won't do nothing if you flash TWRP, just format the userdata and install SuperSU, encryption doesn't matter anymore.
OK thx. So, you tried it with the DualSim version. That's great. But I don't know how to stock Boot and boot into Android? Can you help me with that? Thx a lot.
Sent from my LG-H961N using XDA-Developers mobile app
schuertzi said:
OK thx. So, you tried it with the DualSim version. That's great. But I don't know how to stock Boot and boot into Android? Can you help me with that? Thx a lot.
Sent from my LG-H961N using XDA-Developers mobile app
Click to expand...
Click to collapse
FORMAT userdata via TWRP
Reboot to download mode
Flash stock BOOT image
Reboot
Thx for your explanation. Will try, it when I am back home.
Thx again.
Sent from my LG-H961N using XDA-Developers mobile app
sabpprook said:
FORMAT userdata via TWRP
Reboot to download mode
Flash stock BOOT image
Reboot
Click to expand...
Click to collapse
Thank you very much for the instructions
I have done it the root very easy
But my phone is S-off So I used SD card method
It's very easy way than ADB methode also no need to unlock bootloader if you are S-off.
Dude...... Awesome tutorial........thank you.
Can some one direct me on how to get xposed up and running?????
dsjiffry said:
Dude...... Awesome tutorial........thank you.
Can some one direct me on how to get xposed up and running?????
Click to expand...
Click to collapse
DO IT YOURSELF
Install xposed framework here via TWRP, then install APK here
Thanks so much! I will test this on my single sim X9 :good:
One of the best How-To's I have seen posted on this site in a long time - great work! :laugh:
Do I have to root before I upgrade to the latest Android? 2.18.401.3
I have tried this and as soon as I install twrp the phone is soft bricked. It does not even start if I reinstall stock recovery.
Edit:
I tried again but this time I skipped this part:
0x03 Format Data
Wipe -> Format Data -> type yes to format data
Rooted and not soft bricked.
hello, when I wrote adb devices, it show for me 2 devices, one is htc and one is emulator, so how I can choose my device htc ?
please advice.
Now I use magisk.
I downgraded my phone to 2.17.401.1 (with RUU) and then updated via ota to 2.23.401.1.
Then installed TWRP. From there I installed all three files from the links in the magisk section. Booted into recovery and installed the two zip-files, this time I had to format data to be able to install.
When booted I installed magisk manager from my download directory and Phils superuser app from play store.
Checked root with Root checker to confirm.
Hi, when I try fastboot flash recovery part, I get cannot load 'twrp-3.0.2-0-e56ml.img' message. What should I do?
thank you so much, it worked greatly on my htc x9 dual sim.
---------- Post added at 05:46 PM ---------- Previous post was at 05:46 PM ----------
thank you so much, it worked greatly on my htc x9 dual sim.
after flashing twrp the phone is soft bricked
i flashed twrp and then stock boot.img
when i let twrp change system partition it soft bricks the phone
Hi, Please get backup before use this method!
My phone is die
can you help me ?
Please tell me to flash stock rom in this phone
thanks alot
-.- folllowed instructions on single sim wont boot past htc logo. great job. should have informed us of password or something to actually allow full access so this doesnt happen. how to restore the phone as it wouldnt even let me do a backup in recovery before hand.... and your comments just said do it anyway
edit:
i may have swiped factory reset not format data. this may be my issue. just gotta wait 3 hours to download my original boot image now -.- will post back withupdate
#update:
flashed stock bootimg, recoveryimg and systemimg then flashed decrypted firmware and then the twrp rebooted into recovery instantly it mounted everything fine no password asked. formatted flashed su then booted and seems to be working fine just turning phone on now and says updating apps. thanks will post back with or if any issues
ty ty sir i rooted my phone because of you
kgpp2293 said:
-.- folllowed instructions on single sim wont boot past htc logo. great job. should have informed us of password or something to actually allow full access so this doesnt happen. how to restore the phone as it wouldnt even let me do a backup in recovery before hand.... and your comments just said do it anyway
edit:
i may have swiped factory reset not format data. this may be my issue. just gotta wait 3 hours to download my original boot image now -.- will post back withupdate
#update:
flashed stock bootimg, recoveryimg and systemimg then flashed decrypted firmware and then the twrp rebooted into recovery instantly it mounted everything fine no password asked. formatted flashed su then booted and seems to be working fine just turning phone on now and says updating apps. thanks will post back with or if any issues
Click to expand...
Click to collapse
Hey can u help me? When I try fastboot flash recovery part, I get cannot load 'twrp-3.0.2-0-e56ml.img' message.
DEPRECATED because I don't have the watch anymore. Might still work, might also not. Feel free to just try and iterate on my work.
TWRP touch recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is TWRP touch recovery for the Asus Zenwatch 3.
Usual disclaimer:
Code:
[I] I take no responsibility for any issues to your watch, your house, your job, your kitten, blah blah.[/I]
DON'T ALLOW TWRP TO MODIFY /SYSTEM IF YOU DIDN'T DISABLE DM-CRYPT! Recovery will then get overwritten on every boot though.
INSTRUCTIONS
It's recommended to boot it via "fastboot boot twrp_swift_*.img".
To flash, use the default "fastboot flash recovery twrp_swift_*.img". To boot into recovery, use adb or hold center and bottom button when off. Everything is tested to work fine.
If you want to return to stock recovery, flash recovery image from here.[/SIZE]
DOWNLOAD
3.1.1-0: View attachment twrp_swift_3.1.1-0.img
3.1.0-0: View attachment recovery_swift-3.1.0-0.img
3.0.2-0: View attachment recovery.img
SOURCES
Device/board config
Recommended platform manifest
Thanks a lot to @joeykrim and @T10NAZ, I used their Zenwatch 2 thread as a guide to compile the kernel and recovery.
This is interesting to see, I don't own a ZenWatch 3, but I'm curious how this would work. Would it be possible to flash custom ROMs on a watch? Maybe even port over Android 2.0 for the ZenWatch 3? Just curious how this would work on a watch.
To see something like this on a watch I must say you guys and everyone involved are truly awesome
Thank you!
I flashed a SuperSU zip file and the flash process worked well. Still root is not working because the SuperSU app crashes everytime something needs root rights...
g4rb4g3 said:
Thank you!
I flashed a SuperSU zip file and the flash process worked well. Still root is not working because the SuperSU app crashes everytime something needs root rights...
Click to expand...
Click to collapse
Which SuperSU.zip did you flash? Remember not every SuperSU.zip are compatible with Android wear. I am a bit out of time ..will try to play with root in my kernel.
janjan said:
Which SuperSU.zip did you flash? Remember not every SuperSU.zip are compatible with Android wear. I am a bit out of time ..will try to play with root in my kernel.
Click to expand...
Click to collapse
Nevermind, I got it working now using this tutorial: https://forum.xda-developers.com/ap...t-squashfs-t3319097/post65428079#post65428079
g4rb4g3 said:
Nevermind, I got it working now using this tutorial: https://forum.xda-developers.com/ap...t-squashfs-t3319097/post65428079#post65428079
Click to expand...
Click to collapse
Did you flash the recovery or also only boot it?
Maxr1998 said:
Did you flash the recovery or also only boot it?
Click to expand...
Click to collapse
Sorry for the late response, I didn`t flash it I just booted it. But I`ve sent the watch back and got a Gear S3 instead now.
g4rb4g3 said:
Sorry for the late response, I didn`t flash it I just booted it. But I`ve sent the watch back and got a Gear S3 instead now.
Click to expand...
Click to collapse
No prob, I already tested myself and flashing worked fine.
Thanks, can't wait to see other development stuff to follow too. Anybody tried to root through the recovery ?
I just updated the recovery to TWRP 3.1.0, grab the image from OP.
Latest TWRP installed and working fine. Thank you!
wokrs well!
Thank you
Now running :
https://forum.xda-developers.com/zenwatch-3/development/rom-asus-zenwatch-3-swift-t3537340
I added TWRP 3.1.1-0 to the OP, built on latest Nougat kernel from git and with latest TWRP sources in 7.1 tree. Enjoy!
is there an repair option for the partitions like there is in a stock TWRP? I do not see it. I am having some issues with my watch, one of which is that I am unable to mount /data, which is normally fixed with the repair option under the advanced wipe menu, but I do not see that option here. Please help.
Here is a link to the full issues I am experiencing.
https://www.reddit.com/r/zenwatch/comments/7de8ax/help_unbricking_zenwatch_3/
re: flashing roms in twrp
Coltonbyu said:
is there an repair option for the partitions like there is in a stock TWRP? I do not see it. I am having some issues with my watch, one of which is that I am unable to mount /data, which is normally fixed with the repair option under the advanced wipe menu, but I do not see that option here. Please help.
Here is a link to the full issues I am experiencing.
https://www.reddit.com/r/zenwatch/comments/7de8ax/help_unbricking_zenwatch_3/
Click to expand...
Click to collapse
Have you tried to "FORMAT DATA" in TWRP?
If not then go to the WIPE option in twrp and
select "format data" then you will be ready
to flash a zip file rom or IMG files.
Most likely your DATA partition is "encrypted"
which means the watch cannot successfully
complete a rom installation because it cannot
write to the data partition.
Wiping DATA is fine if your DATA partition is
not encrypted.
Good luck, have a great day!
Misterjunky said:
Have you tried to "FORMAT DATA" in TWRP?
If not then go to the WIPE option in twrp and
select "format data" then you will be ready
to flash a zip file rom or IMG files.
Most likely your DATA partition is "encrypted"
which means the watch cannot successfully
complete a rom installation because it cannot
write to the data partition.
Wiping DATA is fine if your DATA partition is
not encrypted.
Good luck, have a great day!
Click to expand...
Click to collapse
I do not see a "format data" option under wipe in TWRP on my zenwatch when i go to wipe i have either factory reset, or advanced wipe.
If i go to advanced wipe, and then select data, and slide to wipe, it says "unable to mount storage " "updating partition details..." "Failed to mount '/data' (invalid argument)" "...done" "unable to mount storage"
I have a problem with my ZW3: I unlockt the bootloader and booted into TWRP 3.1.1.0 (via fastboot, did not install it).
I wanted to transfer a ROM on my watch, but did not find a way to do it. So I rebooted the system.
But now everytime I want to boot into (stock) recovery (on the watch) I get the android droid with a exclamation mark. Is there a recovery image I can flash to solve this?
How do I transfer files on my watch? I don't see the device on my pc in the list (adb and fastboot work fine).
EDIT: Found a file here: https://forum.xda-developers.com/ze...stock-zenwatch-3-partition-dump-boot-t3535589
Do I have to flash all three files (system, boot and recovery) in order to get recovery back?
EDIT 2: When I boot the recovery from the file above via fastboot I also get the droid with the exclamation mark.
re: stock firmware
Der-Knuffi said:
I have a problem with my ZW3: I unlockt the bootloader and booted into TWRP 3.1.1.0 (via fastboot, did not install it).
I wanted to transfer a ROM on my watch, but did not find a way to do it. So I rebooted the system.
But now everytime I want to boot into (stock) recovery (on the watch) I get the android droid with a exclamation mark. Is there a recovery image I can flash to solve this?
How do I transfer files on my watch? I don't see the device on my pc in the list (adb and fastboot work fine).
EDIT: Found a file here: https://forum.xda-developers.com/ze...stock-zenwatch-3-partition-dump-boot-t3535589
Do I have to flash all three files (system, boot and recovery) in order to get recovery back?
EDIT 2: When I boot the recovery from the file above via fastboot I also get the droid with the exclamation mark.
Click to expand...
Click to collapse
@Der-Knuffi
Go into fastboot and flash all 3 of the image files (recovery.img, boot.img and system.img)
fastboot oem unlock
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot oem lock
When your done flashing reboot the watch.
The watch will boot into official stock Android Wear 1.5, have patience it takes a long time to boot.
Good luck, have a great day!
Misterjunky said:
@Der-Knuffi
Go into fastboot and flash all 3 of the image files (recovery.img, boot.img and system.img)
fastboot oem unlock
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot oem lock
When your done flashing reboot the watch.
The watch will boot into official stock Android Wear 1.5, have patience it takes a long time to boot.
Good luck, have a great day!
Click to expand...
Click to collapse
Thanks, I will try it. Isn't there a dump from AW2.0?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Forgive me for my english)
Hello everyone....I'm not here asking somebody to help me, I don't think you could. I'm here to advice you not to root a Huawei P8 lite 2017. The story of me bricking this phone is long, I've done lots of passages that I can't remember.
I've read guides, asked help and compared softwares before trying to root my phone, but it has been useless.
I'll explain the main problems occured.
I've unlocked bootloader and then I flashed with fastboot tim win recovery..the version is located in this section about huawei p8 lite 2017. TWRP couldn't backup Data partition, it gave me an error that I couldn't avoid: I think that version is not full compatible with this phone. STOP rooting your phone if you can't backup a partition or if the recovery starts giving you error.
I flashed MagiskSu rootless with twrp. Initially worked properly, (but not all softwares were working with it)...after trying to install viper4android, my OS corrupted...Launcher didn't started anymore when I turned up my phone...I could only see the background and go in settings app....I restored my phone with twrp but it had been useless...I had to format data partition. After that, my phone restored properly.
I was having problem with booting into system...it took every time 66 seconds, and I had only few modules installed. Something were wrong. I installed Apps2sd, but it gave me some problems...sometimes was not able to mount partition or to write the script. Then I did the wrost choice of my life. I allowed this app to edit System partition. All the phone corrupted. I was not able to boot into system after reboot. DON'T ALLOW SOFTWARES TO EDIT SYSTEM PARTITION. Then i restored the phone with twrp, but after this, my phone was damaged: No Audio, No microphone, NO camera working, I couldn't play any video or song....it was corrupted. I've tryed to restore system partition, vendor partition, boot image....everything was useless. I flashed the stock recovery and did factory reset...nothing. I flashed stock boot.img...nothing was working.
I've tryed last chace, to flash all stock rom with adb sideload: adb failed. I tryed with fastboot: failed. I at least tryed to flash manually system, vendor, boot and recovery partition with fastboot....but It ended with my phone totally bricked (I think Fastboot didn't worked properly, it gave me some errors). I had wiped all the partition before doing this...but something tell me that fastboot didn't flashed correctly stock partition.
The only thing that is left in my phone is eRecovery, I can't use usb debug, Third parts can not communicate with the phone. I can only reboot, shutdown, and try to download the "lastest version" from server...but it fails at every try. My phone is not accessible anymore.
My advice is NOT TO ROOT HUAWEI P8 LITE 2017. Wait for developers to create advanced software more compatible with this new device.
Now I want to ask help: is there something I can do right now? Why doesn't erecovery work? Is there something I can do with Huawei Support? I have to sent my phone to restore it?
Hey bro...if your phone's bootloader is unlocked as you said...
You can do those easy steps
Download HUAWEI UPDATE EXTRACTOR 9.9.3
Use it to extract the following partitions
System.img
Recovery.img
Boot.img
And other files that you need and copy them into adb.exe folder
Then boot your phone into bootloader
And then use those commands to flash the partitions
fastboot flash system system.img
And
Fastboot flash boot boot.img
And
fastboot flash recovery recovery.img
The flashing process will take a while on system partition
And then do a factory reset using stock recovery
And then the phone should boot up
Sent from my PRA-LA1 using Tapatalk
0000729399 said:
(Forgive me for my english)
Hello everyone....I'm not here asking somebody to help me, I don't think you could. I'm here to advice you not to root a Huawei P8 lite 2017. The story of me bricking this phone is long, I've done lots of passages that I can't remember.
I've read guides, asked help and compared softwares before trying to root my phone, but it has been useless.
I'll explain the main problems occured.
I've unlocked bootloader and then I flashed with fastboot tim win recovery..the version is located in this section about huawei p8 lite 2017. TWRP couldn't backup Data partition, it gave me an error that I couldn't avoid: I think that version is not full compatible with this phone. STOP rooting your phone if you can't backup a partition or if the recovery starts giving you error.
I flashed MagiskSu rootless with twrp. Initially worked properly, (but not all softwares were working with it)...after trying to install viper4android, my OS corrupted...Launcher didn't started anymore when I turned up my phone...I could only see the background and go in settings app....I restored my phone with twrp but it had been useless...I had to format data partition. After that, my phone restored properly.
I was having problem with booting into system...it took every time 66 seconds, and I had only few modules installed. Something were wrong. I installed Apps2sd, but it gave me some problems...sometimes was not able to mount partition or to write the script. Then I did the wrost choice of my life. I allowed this app to edit System partition. All the phone corrupted. I was not able to boot into system after reboot. DON'T ALLOW SOFTWARES TO EDIT SYSTEM PARTITION. Then i restored the phone with twrp, but after this, my phone was damaged: No Audio, No microphone, NO camera working, I couldn't play any video or song....it was corrupted. I've tryed to restore system partition, vendor partition, boot image....everything was useless. I flashed the stock recovery and did factory reset...nothing. I flashed stock boot.img...nothing was working.
I've tryed last chace, to flash all stock rom with adb sideload: adb failed. I tryed with fastboot: failed. I at least tryed to flash manually system, vendor, boot and recovery partition with fastboot....but It ended with my phone totally bricked (I think Fastboot didn't worked properly, it gave me some errors). I had wiped all the partition before doing this...but something tell me that fastboot didn't flashed correctly stock partition.
The only thing that is left in my phone is eRecovery, I can't use usb debug, Third parts can not communicate with the phone. I can only reboot, shutdown, and try to download the "lastest version" from server...but it fails at every try. My phone is not accessible anymore.
My advice is NOT TO ROOT HUAWEI P8 LITE 2017. Wait for developers to create advanced software more compatible with this new device.
Now I want to ask help: is there something I can do right now? Why doesn't erecovery work? Is there something I can do with Huawei Support? I have to sent my phone to restore it?
Click to expand...
Click to collapse
Flash Huawei ROM with keys.
First search for rollback ROM and flash it then flash full rom.
.
hamzio7 said:
Hey bro...if your phone's bootloader is unlocked as you said...
You can do those easy steps
Download HUAWEI UPDATE EXTRACTOR 9.9.3
Use it to extract the following partitions
System.img
Recovery.img
Boot.img
And other files that you need and copy them into adb.exe folder
Then boot your phone into bootloader
And then use those commands to flash the partitions
fastboot flash system system.img
And
Fastboot flash boot boot.img
And
fastboot flash recovery recovery.img
The flashing process will take a while on system partition
And then do a factory reset using stock recovery
And then the phone should boot up
Sent from my PRA-LA1 using Tapatalk
Click to expand...
Click to collapse
Thank you but I've already done this passages when my phone were soft-bricked. It could have helped me, but now the problem is bigger: any partition is corrupted, there's no way I can go into bootloader, and there's no way I can interact with my phone form a pc
persona78 said:
Flash Huawei ROM with keys.
First search for rollback ROM and flash it then flash full rom.
.
Click to expand...
Click to collapse
I can't flash anything since my phone can not interact with any machine...there's no more recovery partition working, no more system partition working...boot image is ok but I can't boot anything. Fastboot mode works only if system partition works too.
0000729399 said:
I can't flash anything since my phone can not interact with any machine...there's no more recovery partition working, no more system partition working...boot image is ok but I can't boot anything. Fastboot mode works only if system partition works too.
Click to expand...
Click to collapse
Yes, you can recover your device because erecovery is working !
You need a MicroSD card, create a folder/directory named "dload" and inside put the UPDATE.APP ( full firmware for your device ) . Put the MicroSD card into your device and keep pressing at the same time all three hardware buttons ( volume +, volume - and power ) ... your device will start automaticly to install UPDATE.APP - if UPDATE.APP is compatible 100% with your device !
Good luck !
surdu_petru said:
Yes, you can recover your device because erecovery is working !
You need a MicroSD card, create a folder/directory named "dload" and inside put the UPDATE.APP ( full firmware for your device ) . Put the MicroSD card into your device and keep pressing at the same time all three hardware buttons ( volume +, volume - and power ) ... your device will start automaticly to install UPDATE.APP - if UPDATE.APP is compatible 100% with your device !
Good luck !
Click to expand...
Click to collapse
Thank you...I tryied, but didn't work...it says "restore failed"...maybe the UPDATE.APP is not full compatible with my phone. If anybody can give me the update.zip of Huawei P8 lite 2017 PRA-LX1 TIM BRAND (PRA-LX1C55B105), I'm here awaiting for it.
Could I try to flash a No Brand Firmware from dload folder?
Another question to you..could I have done something bad that doesn't allow erecovery to work properly? I didn't touch that partition.
Ok I've done researches and I realized that the firmware of my phone doesn't exist yet. The one I tryed to flash has a very similiar build code but it's different., I noticed it right now, I'm not surprised my phone is dead. I can only wait for developers to put that one on internet.
Or I can try to install from dload folder another firmware that is compatible with my phone...If anybody know something about it, tell me please :/
0000729399 said:
Thank you...I tryied, but didn't work...it says "restore failed"...maybe the UPDATE.APP is not full compatible with my phone. If anybody can give me the update.zip of Huawei P8 lite 2017 PRA-LX1 TIM BRAND (PRA-LX1C55B105), I'm here awaiting for it.
Could I try to flash a No Brand Firmware from dload folder?
Another question to you..could I have done something bad that doesn't allow erecovery to work properly? I didn't touch that partition.
Click to expand...
Click to collapse
Yes, "restore failed !" is because firmware not match 100% your device !
0000729399 said:
Ok I've done researches and I realized that the firmware of my phone doesn't exist yet. The one I tryed to flash has a very similiar build code but it's different., I noticed it right now, I'm not surprised my phone is dead. I can only wait for developers to put that one on internet.
Or I can try to install from dload folder another firmware that is compatible with my phone...If anybody know something about it, tell me please :/
Click to expand...
Click to collapse
I found PRA-LX1C55B120 in firmware finder.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v82870/f1/full/update.zip
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
dominj97 said:
I found PRA-LX1C55B120 in firmware finder.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v82870/f1/full/update.zip
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
Click to expand...
Click to collapse
oh my god, do you know if is it trustable? Do you know if somebody has tryed it? I'm gonna try it right now.
dominj97 said:
I found PRA-LX1C55B120 in firmware finder.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v82870/f1/full/update.zip
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
Click to expand...
Click to collapse
Restore Failed....Again.
Maybe the file you gave me is not the right one, or maybe my phone is not able to restore a phone starting from an updated Firmware like the b120 verision...maybe eRecovery wants the stock version, the b105.
I always do this things: I extract all the contents of update.zip in a folder named "dload" on a SD card...then I put the card into my phone and launch eRecovery. I hope I'm not missing any passage.
Does anybody know is eRecovery needs the stock update of the Firmware to restore it?
Could anybody find the PRA-LX1C55B105 (TIM BRAND = C55) Firmware?
0000729399 said:
Restore Failed....Again.
Maybe the file you gave me is not the right one, or maybe my phone is not able to restore a phone starting from an updated Firmware like the b120 verision...maybe eRecovery wants the stock version, the b105.
I always do this things: I extract all the contents of update.zip in a folder named "dload" on a SD card...then I put the card into my phone and launch eRecovery. I hope I'm not missing any passage.
Does anybody know is eRecovery needs the stock update of the Firmware to restore it?
Could anybody find the PRA-LX1C55B105 (TIM BRAND = C55) Firmware?
Click to expand...
Click to collapse
That firmware is impossible to find. Maybe because it is Tim branded. But don't worry you can flash any firmware, no branded too. You can try as I done the last week, to flash with fastboot system, boot and recovery. These images are present in the update.app of the PRA-LX1C432B110, and you can use huawei update extractor to get that images. Good luck my friend!
Manuele1000 said:
That firmware is impossible to find. Maybe because it is Tim branded. But don't worry you can flash any firmware, no branded too. You can try as I done the last week, to flash with fastboot system, boot and recovery. These images are present in the update.app of the PRA-LX1C432B110, and you can use huawei update extractor to get that images. Good luck my friend!
Click to expand...
Click to collapse
I can't flash anything because my phone is bricked...I can only use eRecovery, and I can not comunicate with my phone with a computer. I have to wait for somebody to extract the Firmware or I don't know.
I've already done the passage you wrote, to flash boot and recovey, when my phone was corrupted but NOT bricked. I restored my phone but it didn't solved issues I was having. Now I can't do anything. I can only use eRecovery.
I am not advising or telling that it would be a good idea, but you could try to install the TWRP-Recovery using the prague.img from the "[How To Root] Huawei P8 lite 2017 [PRA-LX1]-Android 7.0-EMUI 5.0" and if it success then trying to restore the PRA-LX1C432B100 firmare which can be found on "[Request] PRA-LX1 C432 oeminfo".
CAUTION: If you succeed you'll have the two SIM version of the firmware and all info of your original firmware will be lost which means that your warranty will definitely be void (it most likely is already).
jtvu said:
I am not advising or telling that it would be a good idea, but you could try to install the TWRP-Recovery using the prague.img from the "[How To Root] Huawei P8 lite 2017 [PRA-LX1]-Android 7.0-EMUI 5.0" and if it success then trying to restore the PRA-LX1C432B100 firmare which can be found on "[Request] PRA-LX1 C432 oeminfo".
CAUTION: If you succeed you'll have the two SIM version of the firmware and all info of your original firmware will be lost which means that your warranty will definitely be void (it most likely is already).
Click to expand...
Click to collapse
Thank you too...but It's the million time I say: I CAN'T FLASH ANYTHING BECAUSE MY PHONE IS TOTALLY BRICKED.
My phone is totally corrupted, the only thing I can do is to use eRecovery. Every other solution dealing with using PC to do things on phone has been tryied when the phone were SOFT BRICKED, and doesn't work anymore because the phone is at 90% HARD BRICKED.
0000729399 said:
Thank you too...but It's the million time I say: I CAN'T FLASH ANYTHING BECAUSE MY PHONE IS TOTALLY BRICKED.
My phone is totally corrupted, the only thing I can do is to use eRecovery. Every other solution dealing with using PC to do things on phone has been tryied when the phone were SOFT BRICKED, and doesn't work anymore because the phone is at 90% HARD BRICKED.
Click to expand...
Click to collapse
Are you saying that you can't go to fastboot too? Or if you can, it gives you error to every flash? But don't worry, if you can use erecovery, try This: You'll notice that you have to pay for this. Good Luck!
https://funkyhuawei.club/register
Manuele1000 said:
Are you saying that you can't go to fastboot too? Or if you can, it gives you error to every flash? But don't worry, if you can use erecovery, try This: You'll notice that you have to pay for this. Good Luck!
https://funkyhuawei.club/register
Click to expand...
Click to collapse
Thank you so much, I realized that Fastboot was not corrupted!
But...
I tryied to flash system, recovery and boot images, then I did the Factory Reset from recovery...but It didn't worked, my phone bootloops like there's no System installed.
I have two hypotesis: 1) Fastboot is not able to flash properly the system partition on Huawei P8 lite 2017, even though it says that the process has been successful.
2) The system I flashed is not compatible...I extracted the system.img file from a PRA-LX1C55B120 (Found with Firmware Finder), while my version was PRA-LXC55B105....Maybe it pretends the B105, and refuses the B120. But they should be the same thing
This is impossible.
0000729399 said:
Thank you so much, I realized that Fastboot was not corrupted!
But...
I tryied to flash system, recovery and boot images, then I did the Factory Reset from recovery...but It didn't worked, my phone bootloops like there's no System installed.
I have two hypotesis: 1) Fastboot is not able to flash properly the system partition on Huawei P8 lite 2017, even though it says that the process has been successful.
2) The system I flashed is not compatible...I extracted the system.img file from a PRA-LX1C55B120 (Found with Firmware Finder), while my version was PRA-LXC55B105....Maybe it pretends the B105, and refuses the B120. But they should be the same thing
This is impossible.
Click to expand...
Click to collapse
Exclude the first hypothesis, because FASTBOOT is 100% trusted. I think that you need to download from firmware finder this version: PRA-LX1C432B110. This version should work. Unzip the update.zip downloaded and with Huawei Update Extractor get the System, boot and recovery images. Then flash everything with fastboot, like this: Fastboot flash system System.img
Remember that commands are case sensitive so be careful. Good luck!
Manuele1000 said:
Exclude the first hypothesis, because FASTBOOT is 100% trusted. I think that you need to download from firmware finder this version: PRA-LX1C432B110. This version should work. Unzip the update.zip downloaded and with Huawei Update Extractor get the System, boot and recovery images. Then flash everything with fastboot, like this: Fastboot flash system System.img
Remember that commands are case sensitive so be careful. Good luck!
Click to expand...
Click to collapse
ok I'll try right now but why that version should work? Do I have to flash only the system partition?
I have a weird issue with TWRP that I cannot seem to resolve.
I have a 4GB Mix on the latest MIUI (China Stable). Bootloader is unlocked and I followed all the steps to got successfully TWRP loaded onto my device and i can come right in to it.
If i restart the device and use volume+ and power TWRP isn't there. Only the stock recovery from MIUI.
I tried the tutorial here on XDA and this one ''en.miui.com/thread-500625-1-1.html"
Is there someone who can help me please?
Many Thanks from the Nederlands!
Dexterd83 said:
I have a weird issue with TWRP that I cannot seem to resolve.
I have a 4GB Mix on the latest MIUI (China Stable). Bootloader is unlocked and I followed all the steps to got successfully TWRP loaded onto my device and i can come right in to it.
If i restart the device and use volume+ and power TWRP isn't there. Only the stock recovery from MIUI.
I tried the tutorial here on XDA and this one ''en.miui.com/thread-500625-1-1.html"
Is there someone who can help me please?
Many Thanks from the Nederlands!
Click to expand...
Click to collapse
I guess you jumped from Samsung, didn't you? Because i remember that you manually have to reboot into recovery at the first time(right after flashing the twrp via odin). So you need to do it from fastboot on Xiaomi(afaik). Just flash the twrp and enter this code in fastboot:
Code:
fastboot boot twrp-blabla.img
Sent from my Xiaomi MIX using XDA Labs
Hi,
i have a package updated for Mix...
I made quick *.bat command to easily flash what i need...
Try OEM unlock tool (bat file) before trying to flash TWRP...
Be sure to have ADB device found in first line and be in fastboot mode !!
http://download.lesscro.com/Mi Mix/TWRP/
Hope help a bit... Cheers !
Konsstantine34 said:
I guess you jumped from Samsung, didn't you? Because i remember that you manually have to reboot into recovery at the first time(right after flashing the twrp via odin). So you need to do it from fastboot on Xiaomi(afaik). Just flash the twrp and enter this code in fastboot:
Code:
fastboot boot twrp-blabla.img
Sent from my Xiaomi MIX using XDA Labs
Click to expand...
Click to collapse
Nope, from the Nexus 6P.
I just tested it and now I'm right in TWRP again. That great! Thanks!!
So every time I want to use TWRP, I need to go into fastboot mode and use that command line?
Nope... power and Vol - or + need make the job or you can install xposed and add a module MIUI Extended Reboot...
Will looks like something like that...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry bored to take a picture from my device...
Thanks for your reply.
No, Power and Vol + i get MI-Recovery 3.0 (main menu) and if i use Power and vol - than i get fastboot mode.
So I now have two recovery's on my device. Is that possible? (TWRP and MI Recovery)
I think i have found the problem..
I've installed TWRP in fastboot mode. I've used ''fastboot boot twrpmrraines.img'' to get into TWRP the first time and i have tried to flash TWRP as recovery.
Now I get the following error message ''error opening: / sdcard'' So there seems to be an error with the sd card i think?
Nope Recovery and fastboot mode are different.... Recovery is used to backup, mount and flash ROM, Mod and various ZIP, IMG files...
Fastboot Mode is used to flash, push, IMG, APK, and sometimes ROM if you use Fastboot method...
Anyway, check in recovery if u can repair sdcard... in wipe feature, DO NOT WIPE, choose REPAIR / Advanced/etc......
lesscro said:
Nope Recovery and fastboot mode are different.... Recovery is used to backup, mount and flash ROM, Mod and various ZIP, IMG files...
Fastboot Mode is used to flash, push, IMG, APK, and sometimes ROM if you use Fastboot method...
Anyway, check in recovery if u can repair sdcard... in wipe feature, DO NOT WIPE, choose REPAIR / Advanced/etc......
Click to expand...
Click to collapse
Can not select sdcard if I click on ''Repair or Change File System'' If I go to Wipe-Advanced Wipe I must select: Dalvik, system, data, internal storage, cache or usb otg. There is no sdcard.
On Mix, SDcard is internal storage....
lesscro said:
On Mix, SDcard is internal storage....
Click to expand...
Click to collapse
Invalid partition selection if i click Internal Storage..
then you can't repair internal storage... can u see, when Mix is on Android ROM, your internal storage... with explorer or PC when u mount as MTP... ?
Dexterd83 said:
Invalid partition selection if i click Internal Storage..
Click to expand...
Click to collapse
Try an another version of twrp image. For me twrp by Mr Raines has no issue other than error 7(mount read-only).
Sent from my Xiaomi MIX using XDA Labs
Dexterd83 said:
I guess you jumped from Samsung, didn't you? Because i remember that you manually have to reboot into recovery at the first time(right after flashing the twrp via odin). So you need to do it from fastboot on Xiaomi(afaik). Just flash the twrp and enter this code in fastboot:
Nope, from the Nexus 6P.
I just tested it and now I'm right in TWRP again. That great! Thanks!!
So every time I want to use TWRP, I need to go into fastboot mode and use that command line?
Click to expand...
Click to collapse
Think I said you before only first boot of twrp.
mount read only can be fixed by go to Mounting and check/uncheck read only system and recheck system...
Then u can flash what u want... strange issue but works...
Konsstantine34 said:
Try an another version of twrp image. For me twrp by Mr Raines has no issue other than error 7(mount read-only).
Click to expand...
Click to collapse
Yea that's the same with smarty, other than that never had a problem since 1st day.
lesscro said:
mount read only can be fixed by go to Mounting and check/uncheck read only system and recheck system...
Then u can flash what u want... strange issue but works...
Click to expand...
Click to collapse
If I do that and want to flash twrp i get the same error: Error opening: '/sdcard/twrpmrraines.img/' (not a directory)
If u are on TWRP, why want flash TWRP again ? i m not sure to understand deal here.... whats' problem actually....
1 - you can't flash TWRP ?
2 - u ry to flash TWRP using fastboot ?
3 - u try to flash twrp from TWRP ? (old image from new image)
4 - other ?
Dexterd83 said:
If I do that and want to flash twrp i get the same error: Error opening: '/sdcard/twrpmrraines.img/' (not a directory)
Click to expand...
Click to collapse
Man, my point was your installed twrp may have got an issue. If it has issue, that's normal can't flash something anything. Use fastboot to flash another twrp as usual.
Sent from my Xiaomi MIX using XDA Labs
Konsstantine34 said:
Man, my point was your installed twrp may have got an issue. If it has issue, that's normal can't flash something anything. Use fastboot to flash another twrp as usual.
Sent from my Xiaomi MIX using XDA Labs
Click to expand...
Click to collapse
I flashed 4 different TWRP files. Nothing will works.
Guys, there is a VERY good (and very bad, but about it in the end) news, at my request, one good forumchanin under the nickname yurxxl from 4PDA, collected on TWRP for Poco M4 Pro 5G
Decryption / data works, connection to the computer, I installed magisk through it.
**********************
Installation:
in fastboot mode with the command:
fastboot flash boot twrp.img
<><><><><><><><><><><
And now the bad news:I put the Taiwanese firmware on myself in the morning,and first tested the recovery on it,yes,the recovery is put on it,and everything also works,there are no questions to the recovery,BUT I flashed the magisk,rebooted the system,updated the magisk from the application,the program wrote about the need to reboot,the reboot went,but then the system did not boot,and even deleting the adb folder (where the magisk is placed),nor the twrp firmware (which is the boot, if anyone did not know) did not help again,I was able to boot into the system only by making format data. Then I put back the global firmware, and everything is fine on it, magisk works fine.
——————————————————
Well, I will add more, yesterday, after all these installations of gsi firmware, and flashing the drain, this inscription dm-verity corruption appeared on my logo your device is corrupt. it can't be trusted and my not work properly. press enter button to continue. Or, device will power off in 5s. Since the firmware via fastboot is buggy for me, I flash through F.T. Sewed in download mode.Then I decided to still try to flash in firmware upgrade mode, since in this mode the firmware formats the memory, and after the firmware the inscription disappeared. Yes, also, in this mode, the bootloader is blocked, I first flashed the Taiwanese firmware, and through MiUnlock, without waiting, unlocked the bootloader.And when a jamb with a magisk appeared on it, I flashed it to the global one, again through firmware upgrade, respectively, I blocked the bootloader again, but I unblocked it right after. Maybe someone will need it.I updated the recovery, now the smartphone is visible in them by the computer when connected in fastbootd mode, which facilitates the installation of gsi firmware.
Yes, the recovery is already patched in magisk
Spoiler: screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Guys, I forgot to add, I have Poco, so the recovery was tested on this modification, on two firmware versions, Global and Taiwan. I do not know if it will work for Redmi.I've disassembled the boot from the firmware for India, there is another core used. And yet, I see they have already downloaded 5 times, they could have written how everything went, it became normal
Hello,
I've tried your twrp, but some partitions are unavailable. By the way, why to flash in boot and not in recovery?
stratonz said:
Hello,
I've tried your twrp, but some partitions are unavailable. By the way, why to flash in boot and not in recovery?
Click to expand...
Click to collapse
Because we do not have a separate recovery, it is located in the boot, so it is practically a stock boot, with a recovery added to it. Which sections are unavailable?
arraki said:
Because we do not have a separate recovery, it is located in the boot, so it is practically a stock boot, with a recovery added to it. Which sections are unavailable?
Click to expand...
Click to collapse
I can't remember now, cos' I have uninstalled twrp and restore original firmware, but it seems to me that was impossible to install GSI in system. A question: have I to install twrp in both the boot partition?
ah, maybe I've tried to do a nandroid backup and in the partition list there wasn't system
stratonz said:
to install GSI in system.
Click to expand...
Click to collapse
For the gsi firmware, it is necessary that the recovery supports this function, few recoveries are able to do this. Backup should be done of the super partition, for normal recovery it is enough to make a backup of two partitions:data and super, I checked. And gsi are normally put through fastbootD. Here I put it on trial
Spoiler: GSI
Thanks, I reinstall twrp, it works, but during backup process createTarFork ended with error code 255, seems dued to (from log):
failed to lookup fscrypt tar policy for '/data/extm' - 'a0e08c6d2252b15091f8e5807863eaa1'
....
I:Error adding file '/data/extm/I581aDAAAAQh4qwuBNkwvrSSE3fUn6RD' to '/data/media/0/TWRP/BACKUPS/CQX899S4BQ8TQWAU/2022-03-04--07-06-12_CUST_evergreen/data.f2fs.win011'
any suggestions? googling, this extm folder seems to be a common problem...
stratonz said:
Thanks, I reinstall twrp, it works, but during backup process createTarFork ended with error code 255, seems dued to (from log):
failed to lookup fscrypt tar policy for '/data/extm' - 'a0e08c6d2252b15091f8e5807863eaa1'
....
I:Error adding file '/data/extm/I581aDAAAAQh4qwuBNkwvrSSE3fUn6RD' to '/data/media/0/TWRP/BACKUPS/CQX899S4BQ8TQWAU/2022-03-04--07-06-12_CUST_evergreen/data.f2fs.win011'
any suggestions? googling, this extm folder seems to be a common problem...
Click to expand...
Click to collapse
Strange, I did a backup data, everything went fine.Although, I didn't do a backup in twrp, I still have a recovery Orange Fox, I did a backup to them, I'll check in twrp later And I've seen this error before on another smartphone, you just need to delete this folder, and everything will be fine.
arraki said:
Strange, I did a backup data, everything went fine.Although, I didn't do a backup in twrp, I still have a recovery Orange Fox, I did a backup to them, I'll check in twrp later And I've seen this error before on another smartphone, you just need to delete this folder, and everything will be fine.
Click to expand...
Click to collapse
Excuse me, have you also a orange fox recovery working on poco m4 pro 5g/redmi etc etc?
stratonz said:
Excuse me, have you also a orange fox recovery working on poco m4 pro 5g/redmi etc etc?
Click to expand...
Click to collapse
Yes, but I also don't know if it will work on Redmi, it works well on Poco, but I really didn't check everything.
I have Poco (evergreen) could I test it?
Just another question: flashing twrp I lost root (magisk). To restore root I have to install magisk from inside twrp, with "install zip"?
stratonz said:
Just another question: flashing twrp I lost root (magisk). To restore root I have to install magisk from inside twrp, with "install zip"?
Click to expand...
Click to collapse
Ok! Done as described and it works
Regarding the TWRP I posted (and orange Fox, which will be below), the MTP works in them, but there is no connection to the computer in fastbootd, the computer does not even react.I wrote about this to the author, I hope he will fix it. Also, when creating a backup /data in twrp, the process ends with an error, the extm folder is to blame for everything.I've seen this error before, on other smartphones, you just need to delete this folder, it won't be a big deal.But there is no such mistake in Orange Fox.
arraki said:
Regarding the TWRP I posted (and orange Fox, which will be below), the MTP works in them, but there is no connection to the computer in fastbootd, the computer does not even react.I wrote about this to the author, I hope he will fix it. Also, when creating a backup /data in twrp, the process ends with an error, the extm folder is to blame for everything.I've seen this error before, on other smartphones, you just need to delete this folder, it won't be a big deal.But there is no such mistake in Orange Fox.
Click to expand...
Click to collapse
Thanks for OF and for working on recoveries!
Twrp available for Note 11T (Evergo) is useless. It can't flash magisk or Gapps. Tested by some users in Telegram, and they failed.
So can anybody help how to flash GApps into Note 11T (evergo) with TWRP?
I mean flashing China MIUI ROM and Flash GApps into that with TWRP.
When i tried to install using "fastboot flash boot OF_boot.img" it gives error
FAILED (remote: This partition doesn't exist)
I also tried "fastboot boot OF_boot.img" then it gives this error
downloading 'boot.img'...
OKAY [ 3.720s]
booting...
FAILED (status read failed (Too many links))
finished. total time: 11.552s
Please guide me @arraki
Update : It worked , i tried using latest platform tools then it does not give any errors!
Thank you very much for creating this recovery file @arraki
Anmol98 said:
When i tried to install using "fastboot flash boot OF_boot.img" it gives error
FAILED (remote: This partition doesn't exist)
I also tried "fastboot boot OF_boot.img" then it gives this error
downloading 'boot.img'...
OKAY [ 3.720s]
booting...
FAILED (status read failed (Too many links))
finished. total time: 11.552s
Please guide me @arraki
Click to expand...
Click to collapse
Is your bootloader unlocked?
arraki said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
it is working now , after i used latest platform tools !
Thanks...