Database Develop

XT890 Stuck on Red Logo. Probably damaged partitions.

Hi, yesterday I received XT890 from another user. Phone stuck on red Motorola logo, can enter fastboot and has locked bootloader.
Fastboot actions:
1. Normal Powerup - Freeze on Fastboot
2. Recovery - Freeze on Red Logo
3. Factory - Freeze on Red Logo
4. BP Tools - Freeze on Fastboot
5. Switch Console - Working
6. Power Off - Freeze on Fastboot
So first of all I tried to flash it by RSD with CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU but on 4/12 it can't reboot phone so I did it manually and it goes to 8/12 and phone shows E:failed to erase partition system.
I also tried to skip system by deleting it from xml but on every other step it can't do anything with partitions (data, cache, cdrom).
I tried fastboot to erase partitions manually but no luck with locked bootloader. So I tried to unlock it but it can't be done cause data can't be erased.
I even tried unbrick script for modified and it passed but no changes.
So what I tried:
1. Format Data/Cache - Can't enter Recovery
2. Flash RSD - Can't flash system partition
3. Unlock Bootloader - Can't format data partition
4. Unbrick - No changes after that
5. Fastboot flash CWM - only stock recovery can be flashed on locked bootloader
6. Fastboot erase data / system/ cache partitions - error
After that I'm assuming that emmc is damaged. If it's software damage it should be way to resurrect it.
Any help is welcome.
Sorry for my nasty English.

Chamelleon said:
Hi, yesterday I received XT890 from another user. Phone stuck on red Motorola logo, can enter fastboot and has locked bootloader.
Fastboot actions:
1. Normal Powerup - Freeze on Fastboot
2. Recovery - Freeze on Red Logo
3. Factory - Freeze on Red Logo
4. BP Tools - Freeze on Fastboot
5. Switch Console - Working
6. Power Off - Freeze on Fastboot
So first of all I tried to flash it by RSD with CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU but on 4/12 it can't reboot phone so I did it manually and it goes to 8/12 and phone shows E:failed to erase partition system.
I also tried to skip system by deleting it from xml but on every other step it can't do anything with partitions (data, cache, cdrom).
I tried fastboot to erase partitions manually but no luck with locked bootloader. So I tried to unlock it but it can't be done cause data can't be erased.
I even tried unbrick script for modified and it passed but no changes.
So what I tried:
1. Format Data/Cache - Can't enter Recovery
2. Flash RSD - Can't flash system partition
3. Unlock Bootloader - Can't format data partition
4. Unbrick - No changes after that
5. Fastboot flash CWM - only stock recovery can be flashed on locked bootloader
6. Fastboot erase data / system/ cache partitions - error
After that I'm assuming that emmc is damaged. If it's software damage it should be way to resurrect it.
Any help is welcome.
Sorry for my nasty English.
Click to expand...
Click to collapse
Ye, great chance that the emmc is damaged. But it still looks to me as if it is software damaged, not hardware, because of the successful flash of recovery. And it is on the same memory module.
Just as in the other post of this phone can u try this and give me the output of especially the flash of gpt.bin (partition table file). I never got an exact answer to it, for my liking, maybe i read over it.
If that doesn't flash (give me the output then i know for sure ), try flashing the boot.img and see what happens. I assume nothing will change from flashing the boot.img, but u gotta try something.
Next we can do is have a look at that intel flashing file, it looks promising. I never had to go to this part so i am out of general ideas (think outside the box maybe?). Maybe we can fiddle something from here. It looks to me like it can flash more than fastboot can, u just need the right files and some we can make, hopefully if i read the sources available to us right.
Hazou

T:\Motorola\Serwis\RAZR i (XT890)\Unbrick\mfastboot-v2>mfastboot flash gpt gpt_s
igned
(bootloader) Variable not supported!
target max-download-size: 100MB
sending 'gpt' (32 KB)...
OKAY [ 0.358s]
writing 'gpt'...
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 1.094s]
finished. total time: 1.460s
T:\Motorola\Serwis\RAZR i (XT890)\Unbrick\mfastboot-v2>mfastboot flash motoboot
motoboot
(bootloader) Variable not supported!
target max-download-size: 100MB
sending 'motoboot' (23273 KB)...
OKAY [ 2.635s]
writing 'motoboot'...
(bootloader) flashing image dnx...
(bootloader) flashing image ifwi...
(bootloader) flashing image bos...
(bootloader) flashing image logo...
(bootloader) flashing image ulogo...
OKAY [ 2.338s]
finished. total time: 4.981s
T:\Motorola\Serwis\RAZR i (XT890)\Unbrick\mfastboot-v2>mfastboot flash boot boot
_signed
(bootloader) Variable not supported!
target max-download-size: 100MB
sending 'boot' (11264 KB)...
OKAY [ 1.243s]
writing 'boot'...
OKAY [ 1.549s]
finished. total time: 2.799s
T:\Motorola\Serwis\RAZR i (XT890)\Unbrick\mfastboot-v2>mfastboot flash recovery
recovery_signed
(bootloader) Variable not supported!
target max-download-size: 100MB
sending 'recovery' (11264 KB)...
OKAY [ 1.338s]
writing 'recovery'...
OKAY [ 1.563s]
finished. total time: 2.907s
T:\Motorola\Serwis\RAZR i (XT890)\Unbrick\mfastboot-v2>mfastboot flash motobp mo
tobp
(bootloader) Variable not supported!
target max-download-size: 100MB
sending 'motobp' (17091 KB)...
OKAY [ 1.714s]
writing 'motobp'...
OKAY [ 76.674s]
finished. total time: 78.396s
T:\Motorola\Serwis\RAZR i (XT890)\Unbrick\mfastboot-v2>mfastboot flash system sy
stem_signed
(bootloader) Variable not supported!
target max-download-size: 100MB
Multi-Flash is enabled!
sending 'system' (102400 KB)...
OKAY [ 9.377s]
writing 'system'...
OKAY [ 2.576s]
sending 'system' (102400 KB)...
(bootloader) BLKDISCARD ioctl /dev/block/mmcblk0 fail
OKAY [ 11.154s]
writing 'system'...
FAILED (remote failure)
finished. total time: 25.509s
T:\Motorola\Serwis\RAZR i (XT890)\Unbrick\mfastboot-v2>mfastboot flash cdrom cdr
om_signed
(bootloader) Variable not supported!
target max-download-size: 100MB
sending 'cdrom' (53258 KB)...
OKAY [ 4.891s]
writing 'cdrom'...
FAILED (remote: Preflash validation failed)
finished. total time: 6.273s
T:\Motorola\Serwis\RAZR i (XT890)\Unbrick\mfastboot-v2>mfastboot erase cache
erasing 'cache'...
(bootloader) BLKDISCARD ioctl /dev/block/mmcblk0 fail
(bootloader) Erase cache fail
FAILED (remote failure)
finished. total time: 1.897s
T:\Motorola\Serwis\RAZR i (XT890)\Unbrick\mfastboot-v2>mfastboot erase userdata
erasing 'userdata'...
(bootloader) BLKDISCARD ioctl /dev/block/mmcblk0 fail
(bootloader) Erase userdata fail
FAILED (remote failure)
finished. total time: 8.110s
T:\Motorola\Serwis\RAZR i (XT890)\Unbrick\mfastboot-v2>

So it looks like only few partitions are broken but how to repair it without unlocking bootloader??

Hmm, it does flash a part of the system if I read it correct. After the first one it gives errors to all partitions after it.
Can u reboot to recovery now, we finally flashed it right. Didn't work last time.
The things I wanted to do with the Intel thingy, are already done with flashing motoboot. So the things I had there are done.
Verstuurd van mijn GT-P5110

Nope, still red logo on recovery. The same was flashed by RSD and same errors appeared as on fastboot. Only different is after flashing RSD I can turn normal powerup and phone restarts to red logo from AP Fastboot but after flashing fastboot commands an error appeared.

Chamelleon said:
Nope, still red logo on recovery. The same was flashed by RSD and same errors appeared as on fastboot. Only different is after flashing RSD I can turn normal powerup and phone restarts to red logo from AP Fastboot but after flashing fastboot commands an error appeared.
Click to expand...
Click to collapse
Yep, this happens because it has nothing to start.
There is just 1 more think I can think off, because all others are closed (locked) or don't work. Or if unlocked we still don't have access.
Does the command "fastboot oem format" does something?
Verstuurd van mijn GT-P5110

Completely forgot about this command, I'll try it after work.

FAILED (remote: Restricted OEM command)

Then its over I think. We can't flash a custom recovery and fiddle around with it. Because maybe by not asking for system/data partition at start etc u can reformat the emmc with parted or other application.
Sorry, only Motorola can fix it. Or u need to replace the motherboard maybe? But that's something else.
Oh, try 1 more thing. Is it possible to load a custom boot image by the command "fastboot boot (image)"? Don't think so, but who knows. So u won't flash it.
Verstuurd van mijn XT890

creating boot image...
creating boot image - 11536384 bytes
downloading 'boot.img'...
OKAY [ 1.412s]
booting...
(bootloader) Command restricted
FAILED (remote failure)
finished. total time: 1.614s
Bootloader blocks it??

Chamelleon said:
creating boot image...
creating boot image - 11536384 bytes
downloading 'boot.img'...
OKAY [ 1.412s]
booting...
(bootloader) Command restricted
FAILED (remote failure)
finished. total time: 1.614s
Bootloader blocks it??
Click to expand...
Click to collapse
Yup, the defy could do it if i remember correctly. Hoped that this one would either. I am out of ideas now, but will have one more look. Don't expect anything, because we already tried most if not all the things we can do.
Edit:
All other things i can think of need to have adb access, and that can only be done by having an unlocked bootloader or root access. Because with root access u can flash a recovery even when u have a locked bootloader most of the time. But we don't have access to the system as well as the partitions, so we are stuck.
That Intel thingy can only flash the bootloader and the bootloader wont repartition the emmc. But we can try anyway if u want. Its a little bit different then the unbrick methode, just a little.
Verstuurd van mijn XT890

Today I flashed Samsung C3595 with partition table from S5610 and it's working well so "different" methods are not scary for me.

Chamelleon said:
Hi, yesterday I received XT890 from another user. Phone stuck on red Motorola logo, can enter fastboot and has locked bootloader.
Fastboot actions:
1. Normal Powerup - Freeze on Fastboot
2. Recovery - Freeze on Red Logo
3. Factory - Freeze on Red Logo
4. BP Tools - Freeze on Fastboot
5. Switch Console - Working
6. Power Off - Freeze on Fastboot
So first of all I tried to flash it by RSD with CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU but on 4/12 it can't reboot phone so I did it manually and it goes to 8/12 and phone shows E:failed to erase partition system.
I also tried to skip system by deleting it from xml but on every other step it can't do anything with partitions (data, cache, cdrom).
I tried fastboot to erase partitions manually but no luck with locked bootloader. So I tried to unlock it but it can't be done cause data can't be erased.
I even tried unbrick script for modified and it passed but no changes.
So what I tried:
1. Format Data/Cache - Can't enter Recovery
2. Flash RSD - Can't flash system partition
3. Unlock Bootloader - Can't format data partition
4. Unbrick - No changes after that
5. Fastboot flash CWM - only stock recovery can be flashed on locked bootloader
6. Fastboot erase data / system/ cache partitions - error
After that I'm assuming that emmc is damaged. If it's software damage it should be way to resurrect it.
Any help is welcome.
Sorry for my nasty English.
Click to expand...
Click to collapse
Hi Chameleon.. i'm having a phone with similar issues (I created a post about it). I have tried steps one and two to no success. To unlock it do you do it via the official way (I ask because I don't know much, maybe there are other ways of doing it)

Yup, only official way.
Wysłane z Motorola RAZR i

here is the thing i talked about. Its just one more command with the unbrick method. But if u never try, u never know.
I assume u have all the files for the unbrick method still installed and on your PC. So u have the xFSTK driver and xfstk-dldr-solo.exe on your drive and working.
In the unbrick folder where the dnx and ifwi files are add the latest files from your latest firmware (dnx, ifwi and motoboot!).
Download the unbrick3.txt and rename to unbrick3.bat inside the folder with the original unbrick.bat
Now open a cmd shell inside the folder where the batch file is located. And then run unbrick3.bat.
After this try rsd lite again with the latest firmware u used.
Most likely it will not work... but ye, u gotta try.
I got this from an acer/asus device. It is the official unbrick methode from that device.

hey guys, i ve got the same problem. the phone stucks on the red M logo. i'm not familiar "aka" noob with this things. I wonder if anyone can give me a help?
I tried to wipe data and participation. the phone completes this commands but again stucks on the red logo.

hjahmetoglu said:
hey guys, i ve got the same problem. the phone stucks on the red M logo. i'm not familiar "aka" noob with this things. I wonder if anyone can give me a help?
I tried to wipe data and participation. the phone completes this commands but again stucks on the red logo.
Click to expand...
Click to collapse
Luckily, u don't have the same problem. U only have to search for a rsd lite flash guide. Flash your latest firmware that is available for your phone and country/brand. And all will most likely be good.

Hazou said:
here is the thing i talked about. Its just one more command with the unbrick method. But if u never try, u never know.
I assume u have all the files for the unbrick method still installed and on your PC. So u have the xFSTK driver and xfstk-dldr-solo.exe on your drive and working.
In the unbrick folder where the dnx and ifwi files are add the latest files from your latest firmware (dnx, ifwi and motoboot!).
Download the unbrick3.txt and rename to unbrick3.bat inside the folder with the original unbrick.bat
Now open a cmd shell inside the folder where the batch file is located. And then run unbrick3.bat.
After this try rsd lite again with the latest firmware u used.
Most likely it will not work... but ye, u gotta try.
I got this from an acer/asus device. It is the official unbrick methode from that device.
Click to expand...
Click to collapse
Yesterday I tried it and unfortunately nothing changed, still can't erase or write to those partitions.

XT890 Stuck on Red Logo. Probably damaged partitions
I woke up this morning to find that my Motorola XT890 is not working. I followed all the procedures for hard rest got the same result as listed below.
1. Normal Powerup - Freeze on Fastboot
2. Recovery - Freeze on Red Logo
3. Factory - Freeze on Red Logo
4. BP Tools - Freeze on Fastboot
5. Switch Console - Working
6. Power Off - Freeze on Fastboot
Contacted Motorola customer service, followed all the procedures as prescribed by Motorola customer service still stuck at Red Logo. Motorola has requested that I send it in for repair. The phone is 11 months old and under warranty. The unfortunate thing is that this is the second time I am sending the phone to Motorola for repair.
Chamelleon said:
Hi, yesterday I received XT890 from another user. Phone stuck on red Motorola logo, can enter fastboot and has locked bootloader.
Fastboot actions:
1. Normal Powerup - Freeze on Fastboot
2. Recovery - Freeze on Red Logo
3. Factory - Freeze on Red Logo
4. BP Tools - Freeze on Fastboot
5. Switch Console - Working
6. Power Off - Freeze on Fastboot
So first of all I tried to flash it by RSD with CFC_9.8.2I-50_SMI-26_S7_USASMIJBRTEU but on 4/12 it can't reboot phone so I did it manually and it goes to 8/12 and phone shows E:failed to erase partition system.
I also tried to skip system by deleting it from xml but on every other step it can't do anything with partitions (data, cache, cdrom).
I tried fastboot to erase partitions manually but no luck with locked bootloader. So I tried to unlock it but it can't be done cause data can't be erased.
I even tried unbrick script for modified and it passed but no changes.
So what I tried:
1. Format Data/Cache - Can't enter Recovery
2. Flash RSD - Can't flash system partition
3. Unlock Bootloader - Can't format data partition
4. Unbrick - No changes after that
5. Fastboot flash CWM - only stock recovery can be flashed on locked bootloader
6. Fastboot erase data / system/ cache partitions - error
After that I'm assuming that emmc is damaged. If it's software damage it should be way to resurrect it.
Any help is welcome.
Sorry for my nasty English.
Click to expand...
Click to collapse

TF701T - getting FAILED (remote: Unsupport Flash Unsparse System Image.)

I've just purchased an Asus Transformer TF701T from a friend at work. It was working perfectly and I was able to restore all my apps as I previously used a Nexus 2013. The pad was running with an older version of Android 4.4.2 so I decided Id like to flash the device to get a newer version but I was unable to unlock it via the Asus unlock tool as I when I ran it, I was getting an "unknown error occurred which may be a network connection issue. Please wait and try again later" message. I tried all the usual fixes, removing my Google account, unlocking the 2 factor authentication etc, but the same error persisted. I then read a few posts and hit upon the idea to flash the firmware via the Bootloader and followed the various guides and got things setup this evening. I am using the Minimal ADB and Fastboot drivers.
So I can get the tablet to the bootloader screen without issue, with the 3 icons RCK, Android and Wipe Data and it responds fine to fastboot commands, even reboot works. So I entered the following after getting the UL-K00C-WW-11.4.1.30-user.zip firmware 11.4.1.30 from the Asus website (it used to have WW 11.4.1.17) and unpacked to my ADB folder. These are the commands I used which are all successful:-
fastboot erase system, fastboot erase recovery, fastboot erase userdata, fastboot erase boot, fastboot erase misc, fastboot erase cache. So far so good!
However, the penultimate command fastboot -i 0x0B05 system blob results in the error in the subject (exact copy of the output below)
Now the tablet just comes up with the Asus logo and in red "Unrecoverable bootloader error (0x00000000)." and only changes if I force it into the bootloader again. I can move between the 3 options ok.
Is there any way of recovering from this? is the problem that the tablet is still locked? I'd really appreciate some help if possible, thanks in advance Martin
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot -i 0x0B05 flash system blob
target reported max download size of 643825664 bytes
erasing 'system'...
OKAY [ 1.021s]
sending 'system' (1781 KB)...
OKAY [ 0.266s]
writing 'system'...
FAILED (remote: Unsupport Flash Unsparse System Image.)
finished. total time: 1.323s

I've managed to resolve it for anyone else that might read this....
Follow the guide here https://forum.xda-developers.com/tr...f701t-nvflash-unbrick-solutiontested-t3742848 and use the NvFlash TF701T Unbrick tool, you need to do a bit of prep but it worked for me
Big thanks to Mr.Bin for this fix.
Cheers and good luck
Martin
martinnut said:
I've just purchased an Asus Transformer TF701T from a friend at work. It was working perfectly and I was able to restore all my apps as I previously used a Nexus 2013. The pad was running with an older version of Android 4.4.2 so I decided Id like to flash the device to get a newer version but I was unable to unlock it via the Asus unlock tool as I when I ran it, I was getting an "unknown error occurred which may be a network connection issue. Please wait and try again later" message. I tried all the usual fixes, removing my Google account, unlocking the 2 factor authentication etc, but the same error persisted. I then read a few posts and hit upon the idea to flash the firmware via the Bootloader and followed the various guides and got things setup this evening. I am using the Minimal ADB and Fastboot drivers.
So I can get the tablet to the bootloader screen without issue, with the 3 icons RCK, Android and Wipe Data and it responds fine to fastboot commands, even reboot works. So I entered the following after getting the UL-K00C-WW-11.4.1.30-user.zip firmware 11.4.1.30 from the Asus website (it used to have WW 11.4.1.17) and unpacked to my ADB folder. These are the commands I used which are all successful:-
fastboot erase system, fastboot erase recovery, fastboot erase userdata, fastboot erase boot, fastboot erase misc, fastboot erase cache. So far so good!
However, the penultimate command fastboot -i 0x0B05 system blob results in the error in the subject (exact copy of the output below)
Now the tablet just comes up with the Asus logo and in red "Unrecoverable bootloader error (0x00000000)." and only changes if I force it into the bootloader again. I can move between the 3 options ok.
Is there any way of recovering from this? is the problem that the tablet is still locked? I'd really appreciate some help if possible, thanks in advance Martin
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot -i 0x0B05 flash system blob
target reported max download size of 643825664 bytes
erasing 'system'...
OKAY [ 1.021s]
sending 'system' (1781 KB)...
OKAY [ 0.266s]
writing 'system'...
FAILED (remote: Unsupport Flash Unsparse System Image.)
finished. total time: 1.323s
Click to expand...
Click to collapse

Root Assistance RP2 Android 9 pie, latest updates.

Got my bootloader unlocked, but when trying to flash or unlock critical I get an error and it goes to a screen with the razer logo, "powered by android" at the bottom, and super small text in the upper left "press any key to shutdown"
and shows this in the cmd window:
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flashing unlock_critical
< waiting for any device >
...
FAILED (command write failed (No error))
finished. total time: 0.027s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash boot_a arter97-kernel-r9-20190607.img
< waiting for any device >
target didn't report max-download-size
sending 'boot_a' (30140 KB)...
FAILED (command write failed (No error))
finished. total time: 0.011s
I do have the full sdk package and used android studios sdk manager to get the latest google usb driver.
HTML:
EDIT: Also I'm on a global version (bought it on razer's website)

Download any version of the firmware available on the Razer developer portal then run the flash-all script. Once that's done, flash boot and system images separately on both partitions just to be on the safe side. Your phone should be able to boot normally after that. Just run setup, flash arter97's kernel, boot into TWRP and try to enter your lock code (odds are this'll fail), then reboot into TWRP, this time your password/lock code should work, then flash Magisk

blackknightavalon said:
Download any version of the firmware available on the Razer developer portal then run the flash-all script. Once that's done, flash boot and system images separately on both partitions just to be on the safe side. Your phone should be able to boot normally after that. Just run setup, flash arter97's kernel, boot into TWRP and try to enter your lock code (odds are this'll fail), then reboot into TWRP, this time your password/lock code should work, then flash Magisk
Click to expand...
Click to collapse
Running the flash_all script just throws it into that shutdowns again and keeps going into it anytime I go back into fastboot mode.
also gives me this
Code:
C:\Users\zacha\Desktop\platform-tools>fastboot devices
my S/N fastboot
C:\Users\zacha\Desktop\platform-tools>flash_all
C:\Users\zacha\Desktop\platform-tools>set fastboot_cmd=fastboot
C:\Users\zacha\Desktop\platform-tools>fastboot flash partition:0 gpt_both0.bin
Sending 'partition:0' (44 KB) FAILED (Write to device failed (Invalid argument))
fastboot: error: Command failed.
or is just sits there likes this:
Code:
C:\Users\zacha\Desktop\platform-tools>adb reboot bootloader
C:\Users\zacha\Desktop\platform-tools>flash_all
C:\Users\zacha\Desktop\platform-tools>set fastboot_cmd=fastboot
C:\Users\zacha\Desktop\platform-tools>fastboot flash partition:0 gpt_both0.bin

In that case, fastboot flash each part individually under both partitions (where applicable) and you should be back to stock

blackknightavalon said:
In that case, fastboot flash each part individually under both partitions (where applicable) and you should be back to stock
Click to expand...
Click to collapse
Just does the exact same thing.

Cyclo_sarin said:
Just does the exact same thing.
Click to expand...
Click to collapse
I'm having the exact same issue. I'm unable to get any flash to work. Tried multiple different machines. Keep getting the same errors. Did you find a solution?
Code:
c:\adb>fastboot flash partition:0 gpt_both0.bin
Sending 'partition:0' (44 KB) FAILED (Write to device failed (Invalid argument))
Finished. Total time: 0.005s
Then my RP2 will go to the "Powered by Android" screen with the Razer logo and say "Press any key to shutdown"
I can use "fastboot devices" and get my devices serial number back along with rebooting the bootloader so I don't think it's a driver issue. Out of options and could use some help. At this point I can't even get the factory images to flash.
RP2 - ATT

xCROv said:
I'm having the exact same issue. I'm unable to get any flash to work. Tried multiple different machines. Keep getting the same errors. Did you find a solution?
Code:
c:\adb>fastboot flash partition:0 gpt_both0.bin
Sending 'partition:0' (44 KB) FAILED (Write to device failed (Invalid argument))
Finished. Total time: 0.005s
Then my RP2 will go to the "Powered by Android" screen with the Razer logo and say "Press any key to shutdown"
I can use "fastboot devices" and get my devices serial number back along with rebooting the bootloader so I don't think it's a driver issue. Out of options and could use some help. At this point I can't even get the factory images to flash.
RP2 - ATT
Click to expand...
Click to collapse
Incorrect cord?
https://developer.razer.com/razer-phone-dev-tools/factory-images/
Razer recommends you use a USB 3 Type-A to Type-C spec-compliant cable for any device flashing.
Click to expand...
Click to collapse
Or old ADB/Fastboot: https://developer.android.com/studio/releases/platform-tools.html

xCROv said:
I'm having the exact same issue. I'm unable to get any flash to work. Tried multiple different machines. Keep getting the same errors. Did you find a solution?
Code:
c:\adb>fastboot flash partition:0 gpt_both0.bin
Sending 'partition:0' (44 KB) FAILED (Write to device failed (Invalid argument))
Finished. Total time: 0.005s
Then my RP2 will go to the "Powered by Android" screen with the Razer logo and say "Press any key to shutdown"
I can use "fastboot devices" and get my devices serial number back along with rebooting the bootloader so I don't think it's a driver issue. Out of options and could use some help. At this point I can't even get the factory images to flash.
RP2 - ATT
Click to expand...
Click to collapse
BeardKing said:
Incorrect cord?
https://developer.razer.com/razer-phone-dev-tools/factory-images/
Or old ADB/Fastboot: https://developer.android.com/studio/releases/platform-tools.html
Click to expand...
Click to collapse
Have ya'll tried using this tool?? It works I'm telling you it'll solve any issues you have with ADB and or FASTBOOT period....
https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445

Question How to install custom recovery TWRP?

I searched a lot of articles all flashed to the recovery partition
Code:
>fastboot flash recovery boot_twrp_UNOFFICIAL.img
Sending 'recovery' (65536 KB) OKAY [ 2.062s]
Writing 'recovery' FAILED (remote: 'This partition doesn't exist')
fastboot: error: Command failed
I found some information that Android 11 uses Virtual A/B
Do I need to modify boot.img to install custom recovery in Android 11?

AceSheep said:
I searched a lot of articles all flashed to the recovery partition
Code:
>fastboot flash recovery boot_twrp_UNOFFICIAL.img
Sending 'recovery' (65536 KB) OKAY [ 2.062s]
Writing 'recovery' FAILED (remote: 'This partition doesn't exist')
fastboot: error: Command failed
I found some information that Android 11 uses Virtual A/B
Do I need to modify boot.img to install custom recovery in Android 11?
Click to expand...
Click to collapse
fastboot boot twrp.img
Go ti advanced and install current twrp

Otherwise u can installiert it temporarly on boot, fastboot flash Boot twrp.IMG
Now you can Boot into it using hardwarebuttons....Herr u can flash it finaly
Did u find a working twrp....this one here doesnt work....also otg mouse not working in that one

bambamGN2 said:
Otherwise u can installiert it temporarly on boot, fastboot flash Boot twrp.IMG
Now you can Boot into it using hardwarebuttons....Herr u can flash it finaly
Did u find a working twrp....this one here doesnt work....also otg mouse not working in that one
Click to expand...
Click to collapse
I use a type-c hub to connect a wireless mouse and it works

I used this command and it didn’t work normally, it will enter the system normally after restart
Code:
>fastboot boot images\boot_twrp_UNOFFICIAL.img
Sending 'boot.img' (65536 KB) OKAY [ 1.735s]
Booting FAILED (Status read failed (Too many links))
fastboot: error: Command failed
This command can start to TWRP but cannot install it
Code:
>fastboot flash boot_b images\boot_twrp_UNOFFICIAL.img
>fastboot set_active b
>fastboot reboot
Do I still need to unpack boot.img and copy the ramdisk file

AceSheep said:
I used this command and it didn’t work normally, it will enter the system normally after restart
Code:
>fastboot boot images\boot_twrp_UNOFFICIAL.img
Sending 'boot.img' (65536 KB) OKAY [ 1.735s]
Booting FAILED (Status read failed (Too many links))
fastboot: error: Command failed
This command can start to TWRP but cannot install it
Code:
>fastboot flash boot_b images\boot_twrp_UNOFFICIAL.img
>fastboot set_active b
>fastboot reboot
Do I still need to unpack boot.img and copy the ramdisk file
Click to expand...
Click to collapse
fastboot boot twrp_UNOFFICIAL.img
This work for sure

This topic is great, but I'm afraid many of us would totally miss the information in here, do anyone has the will to turn the information here into a little "how to TWRP" guide as a topic here? That would be awesome!

My device is Redmi Note 10 5G China and the EEA rom flashed. Using twrp will get stuck in the logo and cannot enter.
Before that, I can start twrp using China rom. I'm still looking for reasons
----------
P.S. Does anyone know how to compile twrp for Android 11? I need a little help

AceSheep said:
----------
P.S. Does anyone know how to compile twrp for Android 11? I need a little help
Click to expand...
Click to collapse
No but maybe this helps????
Make A TWRP Tree For Your Device & Build.md
GitHub Gist: instantly share code, notes, and snippets.
gist.github.com

i suggest for now stay on stock recovery. you can root phone installing magisk via fastboot. and the only way to try custom rom is flashing the gsi ported generic rom. the nippon gsi telefram group have a lot of gsi. but my advice is wait miu13 update. most of gsi have audio incompatibility. but if you like aosp roms this is the only way. mtk full custom roms for our device dont exist

I need some help with the recovery flashing

I am currently trying to flash TWRP to my old Xperia Z and when I try to flash it, fastboot spew me with an error:
Sending 'recovery' (15198 kB) OKAY [ 0.500s]
Writing 'recovery' FAILED (remote: 'Command not allowed')
fastboot: error: command failed
I unlocked the bootloader already and Treble Check reported that I have A-only
Can someone give me some solution to this?

The only way i got my phone to flash is by flashing it via the Sony Mobile Flasher
Dl: https://www.ytechb.com/sony-mobile-flasher/
once there unpack the RAR file
then get the fastboot and flasher drivers
and the driver for your specific model
then connect your device in fastboot mode
click the flash button (top left corner)
click fastboot mode
click flash kenel
change the explorer to search for .img files
click the TWRP img for you phone
hopefully should work