Hi, i need help on this phone.
So the issue is this phone went into a bootloop but i can still go to recovery or hboot. When I tried doing adb the phone cant be found. Having no idea on how to go about messing with HTC phones, I brought it to a technician. This phone has a locked bootloader, he was able to unlock it and then install TWRP but he failed to load rom on this device and gave up. Thinking since it got TWRP i can go ahead and try to fix it myself since the technician already gave up and i was not charged for the "repair". When I went home the phone wont boot, when I charge it the led wont turn on and the phone wont respond to any button combinations, tried to shine a light on the sensors too while booting up and trying the button combinations but it didnt work. I was getting these errors (attached) before I went to get the phone fixed. It says that data it failed to mount /data. When I connect the phone to my laptop i can see in device manager that the phone is read as Qualcomm HS-USB QDLoader 9008. Is there still a way to fix this or is this hardware related already? Cause if its hardware related then I would stop trying to fix this phone and maybe just sell it for its parts. Any help would be greatly appreciated, thanks.
Kcube989 said:
Hi, i need help on this phone.
So the issue is this phone went into a bootloop but i can still go to recovery or hboot. When I tried doing adb the phone cant be found. Having no idea on how to go about messing with HTC phones, I brought it to a technician. This phone has a locked bootloader, he was able to unlock it and then install TWRP but he failed to load rom on this device and gave up. Thinking since it got TWRP i can go ahead and try to fix it myself since the technician already gave up and i was not charged for the "repair". When I went home the phone wont boot, when I charge it the led wont turn on and the phone wont respond to any button combinations, tried to shine a light on the sensors too while booting up and trying the button combinations but it didnt work. I was getting these errors (attached) before I went to get the phone fixed. It says that data it failed to mount /data. When I connect the phone to my laptop i can see in device manager that the phone is read as Qualcomm HS-USB QDLoader 9008. Is there still a way to fix this or is this hardware related already? Cause if its hardware related then I would stop trying to fix this phone and maybe just sell it for its parts. Any help would be greatly appreciated, thanks.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=56198279&postcount=2
Sorry
Sent from my HTC One using XDA Labs
Related
Hey guys, I need your help, I bricked my phone yesterday, and trying to solve it I used miflash, but now that the process finished my phone only vibrate and show a green light and then start a loop , and my pc wont recognizes my phone, somebody can help me please?
sorry for my bad english
Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804
Uivalf39 said:
Could you give more info? Which phone, what bricked the phone, bootloader locked/unlocked, what do you see in device manager on your PC?
Are you able to go into fastboot?
There's another user dealing with a bricked phone currently here, see if anything there helps you out. Link: https://forum.xda-developers.com/zuk-z2-pro/help/zuk-z2-booting-anymore-restore-t3539804
Click to expand...
Click to collapse
So in the last days I bricked my z2 pro by closing the bootloader with a custom installed, and to solve the problem I put it in EDL mode and I used the flash mi, but now when I press the power button it just vibrates and flashes a green Led, but it does not turn on, I already tried several combinations of buttons to get into fastboot and nothing, and when I plugged the usb into the pc it shows nothing
I accidentally deleted my phone OS using TWRP.
So, I fixed this and installed stock android firmware for my device and locked the bootloader.
It was all set up nicely. Then, I decided to update to the latest android version and now it showed the updating logo and everything and the screen suddenly went black and it won't show anything.
I have tried holding power and volume down for 2 minutes but have had no luck.
I have tried charging with many USB cables.
When I plug a USB cable into my phone and computer, I get the error message "USB Device Not Recognized".
Please help me fix this error and help me to get my phone working again, thank you in advance.
You broke the bootloader, this can be solved if Moto releases the blankflash files, however motorola has no idea in releasing those files. get some other mobile, no other alternatives as of now.
Jon_6 said:
I accidentally deleted my phone OS using TWRP.
So, I fixed this and installed stock android firmware for my device and locked the bootloader.
It was all set up nicely. Then, I decided to update to the latest android version and now it showed the updating logo and everything and the screen suddenly went black and it won't show anything.
I have tried holding power and volume down for 2 minutes but have had no luck.
I have tried charging with many USB cables.
When I plug a USB cable into my phone and computer, I get the error message "USB Device Not Recognized".
Please help me fix this error and help me to get my phone working again, thank you in advance.
Click to expand...
Click to collapse
Sorry Bro, you've completely bricked your phone. Even if Motorola releases blank flash files for Moto G 2 Titan, your mobile should be detected as "Qualcomm HS-USB Qdloader 9008". But as you mentioned that when you connect your phone with PC, it shows USB DEVICE NOT RECOGNISED, so there is nothing you can do now. Try giving it to service centre see if they can help
pkdon123 said:
Sorry Bro, you've completely bricked your phone. Even if Motorola releases blank flash files for Moto G 2 Titan, your mobile should be detected as "Qualcomm HS-USB Qdloader 9008". But as you mentioned that when you connect your phone with PC, it shows USB DEVICE NOT RECOGNISED, so there is nothing you can do now. Try giving it to service centre see if they can help
Click to expand...
Click to collapse
Thank you for your reply. I tried plugging my phone into my PC again after leaving it for a while and charging it for a few hours. Now, it shows as Qualcomm HS-USB Qdloader 9008 as you said. For some reason, it wasn't recognised last time I connected my phone to my computer.
Karthik_pm said:
You broke the bootloader, this can be solved if Moto releases the blankflash files, however motorola has no idea in releasing those files. get some other mobile, no other alternatives as of now.
Click to expand...
Click to collapse
Thank you for your answer, in the meantime, I'll just buy a cheap SIM-free phone that is in my Moto G.
I may as well use that and when my contract is finished, buy a new phone.
Jon_6 said:
Thank you for your reply. I tried plugging my phone into my PC again after leaving it for a while and charging it for a few hours. Now, it shows as Qualcomm HS-USB Qdloader 9008 as you said. For some reason, it wasn't recognised last time I connected my phone to my computer.
Click to expand...
Click to collapse
Well That's A Good News But I've Tried Searching Blank Flash Files on Google, Unfortunately I'm Unable To Find The Files For TITAN, The Files Available Online Are for Moto G FALCON, Which Wont Work Here..
Hello guys i have nokia 8 with Nougat Os and tried to flash last OTA pie file With twrp sideload option but i think there was problem with loading files and the update stopped in 50 percent so i rebooted phone but nothing happened the phone turned off not turning on or recovery even not charging , tried to connect phone with usb cable to pc same nothing happening , is there is any solution i thought maybe the phone freeze on black screen so its been 2 days im waiting incase the battery still not drained so if the battery drained and i charged phone maybe its turn on !
i Tried all the boot options holding Vol+ Power ,
Vol- Power , Vol+ Vol- Power , nothing happen no vibrate or any sound .:crying:
WTF
What did you think when you flash OTA update with custom recovery TWRP?
These are things that you must know before you flash or do anything on your phone.
OTA UPDATE-->ONLY ORIGINAL RECOVERY CAN FLASH.
cyrusct82 said:
WTF
What did you think when you flash OTA update with custom recovery TWRP?
These are things that you must know before you flash or do anything on your phone.
OTA UPDATE-->ONLY ORIGINAL RECOVERY CAN FLASH.
Click to expand...
Click to collapse
u can download updates using adb sideload command and thats what i did
HS-USB Diagnostics 9008 ? In windows device manager?
What do you see in Windows device manager?
Do you see Fastboot, or HS-USB Diagnostics 9008 ?
Did you unlock_critical?
If you see HS-USB Diagnostics 9008, then your bootloader have to be bind to one slot.
Solution: Follow steps of LG qualcomm. You have a hard way a head you, because there or no ready model-files yet that "someone" extracted from our firmware-binary-files.
https://forum.xda-developers.com/verizon-lg-g3/general/fix-unbrick-hard-bricked-lg-g3-vs985-t3467067
You need drivers for Qualcomm installed on windows Qualcomm QDLoader_HS-USB_Driver 32 and 64bit Link is in the link above
Follow internet with these keywords when you search "unbrick HS-USB Diagnostics 9008 " on google. Also there is defferense between in partiotions mountspoint because of different GB-size 64GB 128GB
Don't follow this unless you know your thing: Warning! https://forum.xda-developers.com/mi-a2/how-to/guide-install-payload-bin-twrp-t3865319
This is my partiotion that I flashed and theyr size, size isn't important information but when flashing through Qualcom there is need for specifik hex-code, start-sector to end-block for each partition in the EMMC (phone-harddrive)
PHP:
274*432 abl.img
405*504 bluetooth.img
53*161*984 boot.img
8*388*608 cda.img
225*280 cmnlib.img
294*912 cmnlib64.img
61*440 devcfg.img
16*777*216 dsp.img
41*943*040 hidden.img
262*144 hyp.img
380*928 keymaster.img
17*809*408 mdtp.img
1*081*344 mdtpsecapp.img
114*331*648 modem.img
2*326*528 nvdef.img
53*248 pmic.img
237*568 rpm.img
11*079*680 splash.img
3*758*096*384 system.img
45*056 systeminfo.img
1*945*600 tz.img
3*006*464 xbl.img
22 File(s) 4*032*188*416 bytes
I am almost in the same situation, maybe yours is easier, dependes on the details we don't know exactly, but this Qualcomm Com port is the last resort. I trouble when I did flash everything when I dumped/extracted the firmware, maybe the software-hack-tools I used where not perfect, Or me dum for flashing every img and
Now my fastboot don't work with a black dead phone. I working it out. And will share the solution by time.
kurdi9132 said:
Hello guys i have nokia 8 with Nougat Os and tried to flash last OTA pie file With twrp sideload option but i think there was problem with loading files and the update stopped in 50 percent so i rebooted phone but nothing happened the phone turned off not turning on or recovery even not charging , tried to connect phone with usb cable to pc same nothing happening , is there is any solution i thought maybe the phone freeze on black screen so its been 2 days im waiting incase the battery still not drained so if the battery drained and i charged phone maybe its turn on !
i Tried all the boot options holding Vol+ Power ,
Vol- Power , Vol+ Vol- Power , nothing happen no vibrate or any sound .:crying:
Click to expand...
Click to collapse
did you get any solution??
i too by mistake flashed stock firmware with TWRP Recovery.
Phone is totally dead, isnt starting at all...
Shabbirkt said:
did you get any solution??
i too by mistake flashed stock firmware with TWRP Recovery.
Phone is totally dead, isnt starting at all...
Click to expand...
Click to collapse
I'm exactly in the same problem. I didn't do it by accident, it was stupidity. But I don't want to go to service center as a looser...
Please, some help.
BTW, I feel is stil warm, off, but warm, like there is something spending energy there. I tried pressing all the conbinations of buttons, even 15 min pressing all together.... Nothing happened.
Please, please, please. Any tips?
I bouhgt the phone 3 days ago:crying:
Dr.Csoo said:
I'm exactly in the same problem. I didn't do it by accident, it was stupidity. But I don't want to go to service center as a looser...
Please, some help.
BTW, I feel is stil warm, off, but warm, like there is something spending energy there. I tried pressing all the conbinations of buttons, even 15 min pressing all together.... Nothing happened.
Please, please, please. Any tips?
I bouhgt the phone 3 days ago:crying:
Click to expand...
Click to collapse
No luck yet. I tried to flash Official firmware using twrp which eventually let to death.
Service centre guys will says your phone is dead when pc wont detect it...
Shabbirkt said:
No luck yet. I tried to flash Official firmware using twrp which eventually let to death.
Service centre guys will says your phone is dead when pc wont detect it...
Click to expand...
Click to collapse
Do you know if they can or not notice if device was hard bricked by software mistakes?
@kurdi9132
Plug your phone to your computer via. USB, and leave it for 15-16mins, you should hear a notification sound, then check Device Manager to see if Qualcomm 9008 comes up.
Please let us know!
well... doing some stuff with t-virus and my curiosity led to situation like what is mentioned here. everything was fine untill I pressed reboot>edl from recovery. Phone went down and went down deep!
PC makes sound when I connect the phone. but nothing more than that.
Device manager shows HS-USB Diagnostics 9008.
It looks like that the phone does not even charge. I cant feel any warming while connected to power adapter.
So...?
SO i feel like a real doofus. I managed to accidentally uninstall the 9008 driver on device manager. I have no access to my device since its stuck in EDL mode and I cant figure out how to get it out of it. I managed find a Qualcomm_QDLoader_HS-USB_Driver_64bit_Setup.zip online but it doesnt work or more likely i am doing something wrong. Ive tried manually selecting the qcser.inf file in the driver selection like some tutorials said but it spat out an incompatibility error at me. I tried using the exe file to install the drivers for me but when i went into select the driver it just wasnt there or it had no affect. Im losing hope. Feel free to ask questions.
UPDATE: Completely draining the battery seems to have taken the phone out of EDL mode. Its charging fine and everything now. The way I drained the phone (relatively) quickly was to place it under a pillow. This kills the phone. No news about the drivers yet.
Hello all,
A friend of mine said he was careless and installed an A2 Lite ROM to his A2. All I know is he can't fix the phone no matter what he tried.
Can we do something about this? Or is the phone permanently bricked?
lelele5 said:
Hello all,
A friend of mine said he was careless and installed an A2 Lite ROM to his A2. All I know is he can't fix the phone no matter what he tried.
Can we do something about this? Or is the phone permanently bricked?
Click to expand...
Click to collapse
try flashing stock rom
Thank you for the reply. Will get back to you as soon as I get an answer from him.
Okay, I got some more info: From what my friend said:
He installed the ROM but after selecting "restart device" it didn't boot up.
Pressing button combinations has no effect either.
When the device is connected to PC Windows recognizes it as "Qualcomm HS-USB QDLoader 9008(COM3)".
He also tried different versions of MiFlash but he is getting "The Write timed out" and "cannot read hello packets" (???) errors.
Since the device isn't reacting to button presses he can't activate fastboot.
This was translated from another language. Hope I didn't make any mistakes.
EDIT: He tried edl before, it didn't work.
Now he is getting "Error loading type library/DLL".
Your friend need to do Flash Point
Ask him to google "How to flash a qualcomm soc with qpst via com port". I'm sure he'd find a lot of videos on youtube guiding through the entire process. Also tell him to keep the stock fastboot rom downloaded, coz he'll be needing that.
Flashing a wrong rom destroyed the partition table of his device. If he cant fix it himself, tell him to visit a nearby service centre. He'll get the device back in a few days or so.
lelele5 said:
Okay, I got some more info: From what my friend said:
He installed the ROM but after selecting "restart device" it didn't boot up.
Pressing button combinations has no effect either.
When the device is connected to PC Windows recognizes it as "Qualcomm HS-USB QDLoader 9008(COM3)".
He also tried different versions of MiFlash but he is getting "The Write timed out" and "cannot read hello packets" (???) errors.
Since the device isn't reacting to button presses he can't activate fastboot.
This was translated from another language. Hope I didn't make any mistakes.
EDIT: He tried edl before, it didn't work.
Now he is getting "Error loading type library/DLL".
Click to expand...
Click to collapse
all is fine ...
he can flash it in miflash in edl mode
if computer can see the 9008 com port he is already in edl
the error with hello packets is because he waits too long to start flashing ..he needs to unplug phone then when he plugs it in he must have everything prepared then press flash quickly
he can wait for battery to run out of charge ...then prepare miflash ...then plug in phome ...the EXACt moment it wakes press flash
then it will work
Thanks a lot for your time and help everyone. He got frustrated and sent it to a service center. I couldn't convince him. It works fine now, though.