Database Develop

Diamond reboot loop w. original ROM

hi there,
this morning, without any interactiom, i heard the vibration of my touch diamond restarting.(with original newest ROM from htc website that ran without any problem for several months). battery was about 80% yesterday evening.
but it wasn´t starting at all. after the HTC animation and the green windows mobile screen, it started again. after restarting for 20 minutes i took out the battery, put it in again and performed a hard reset as stated in the manual.
now, on the "rainbow" screen i get a message like
psoc diam stage_pvt 0x32
then i did the Volume-Up reset, and now i don´t even get the red version information in the lower right screen. as it doesn´t even start i cannot get an active sync connection.
any ideas? is my phone broken? i didn´t do anything special, and i wonder why it rebooted without interaction this morning.
any ideas what i can do?
thanks in advance,
jkersch

Mine started doing this about 2 weeks ago it woke me up in the middle of night while sleeping with its vibrator and start sound.
The only thing I have found is that my little reset button at the pen holder dosent work anymore. To do a hard reset i have to takeout the battery and then put it in, hold the volume key and enter key then power it to get it. Flashed by holding volume down and the power on, it hold for about 10min just enough to get the flash.
I managed to flash it once but it dosent help, it constantly reset at the thouch diamond screen. Some times i get to the green windows mobile screen.
As warrenty is out on my phone and ive given up and using another phone.

Same problem in a different thread
Have a look at http://forum.xda-developers.com/showthread.php?p=5279740.

install a new radio worked for me

Mteor wont turn on

hm , yesterday i installed a game. i try to play, but my phone freezed. i take battery out, put it back and phone no longer turning on. When the phone is connected with laptop via usb, i can turn on till green screen and then phone restarts. wtf is the problem ?

P.S my phone has wm5

Do a hard reset,

how ? two soft keys + power button ? not working

There was once when I thought the hard reset method was not working either. I later found out that it was because one of the two soft keys(usually the left) was not very responsive. When I tried again,this time pressing harder on the two soft keys, it worked.

Black screen with backlight

HI every body, I have a problem and I'm asking for help
a while back my HTC HD7 felt in the sea. I managed to get it dried and fixed and it worked fine
but every now and then the screen goes black. normally i fix the problem by taking the battery out
the problem happened again a few days ago, and the screen won't turn on, when I turn the phone on I see the backlights turning on and the touch work fine and I can hear the keys and the unlock screen sound, but can't see anything
I tried to do a hard reset but the volume up key is not working so I can't access the hard reset menu.
my question .. is the a software to do a hard reset via PC. or can I use the headphone volume keys instead of the device ones???
I'm running WP 7.8 official, and a window 7 on PC.
please any help is appreciated ...
thanks

My moto g (2014) wont power on.

I was checking my whatsapp today and all of a sudden the screen went blank. The power and volume button didnt respond. I then tried a soft reset by holding the power and volume up keys together. I did get upto the motorola logo during power on, then the screen turns off and then turns on again with the moto logo. This happened time and again. I then tried a hard reset using the recovery by pressing the power and volume down. I then pressed factory thinking a factory reset would help, again the screen turned off and i got a blinking led for a few minutes. Now i am a working professional and dont find time to take it to the service centre. Was wondering if any of you could be of help. Thanks.

srprashant2705 said:
I was checking my whatsapp today and all of a sudden the screen went blank. The power and volume button didnt respond. I then tried a soft reset by holding the power and volume up keys together. I did get upto the motorola logo during power on, then the screen turns off and then turns on again with the moto logo. This happened time and again. I then tried a hard reset using the recovery by pressing the power and volume down. I then pressed factory thinking a factory reset would help, again the screen turned off and i got a blinking led for a few minutes. Now i am a working professional and dont find time to take it to the service centre. Was wondering if any of you could be of help. Thanks.
Click to expand...
Click to collapse
Hello there,
MOstly your battery must have drain so just recharge ur battery and try powering it on. If this didnt help please elaborate your problem by telling did u tried doing something such as trying to root or trying to install a custom room.

pritesh.kedar789 said:
Hello there,
MOstly your battery must have drain so just recharge ur battery and try powering it on. If this didnt help please elaborate your problem by telling did u tried doing something such as trying to root or trying to install a custom room.
Click to expand...
Click to collapse
nevermind i gave another shot at factory reset with a calm and composed mind and have managed to get the phone up and running. thanks

Dead Lumia 925 after unlock bootloader fail

Here's the story:
I was tried to unlock bootloader my lumia 925 by WPinternals. When it was about 31% app crashed and exit, I tried restarted app several time. but it still crashed. I held the power button to turned it off and when I reconnected the phone nothing happened pc not shown any new connected device and the windows button on the phone keep flickering. When I hold power button or any combine button the phone just vibrate and the screen just black. I've tried every flashing method but my pc not recognized so nothing worked. So what can I do to my phone. Is there any how to make my pc recognize the phone.
Thank for reading and help .

Sybyl said:
Here's the story:
I was tried to unlock bootloader my lumia 925 by WPinternals. When it was about 31% app crashed and exit, I tried restarted app several time. but it still crashed. I held the power button to turned it off and when I reconnected the phone nothing happened pc not shown any new connected device and the windows button on the phone keep flickering. When I hold power button or any combine button the phone just vibrate and the screen just black. I've tried every flashing method but my pc not recognized so nothing worked. So what can I do to my phone. Is there any how to make my pc recognize the phone.
Thank for reading and help .
Click to expand...
Click to collapse
<-

First of all you should try to charge the 925 for several hours. Normally, a lightened Windows button indicates a completely drained battery. It will take quite a while until at least the charging symbol appears on the display. Later on you will see if you arrive at QSB in Device Manager or if you can return to flash mode.
Best wishes,
Joachim

JoachimP said:
First of all you should try to charge the 925 for several hours. Normally, a lightened Windows button indicates a completely drained battery. It will take quite a while until at least the charging symbol appears on the display. Later on you will see if you arrive at QSB in Device Manager or if you can return to flash mode.
Best wishes,
Joachim
Click to expand...
Click to collapse
I tried and charged it for almost a day but nothing happened, my computer still couldn't see it.

try using windows device recovery tool..
it same happened with me and I used WDRT and it detected my device..

Dude... You have a dead-boot lumia.
Solution: JTAG (cuz my method of unbricking dead-boot lumia is not working, boots to QUALCOMM Modem Mode)