Cyanogenmod 12.1 Question - Moto X Q&A

Hi guys. Quick questions. I have CM 12.1 on my Moto X 2013. It is a USCC phone. For some reason, I have times that I have to dial the *228 to get mobile data to work, and every once in a while, it will just have a red line across the top that says network lost. This is always in areas where I know I usually have strong 4G service. Any ideas? Thanks.

Related

Will a Verizon X work on T-mobile?

I am ready for a new phone, but would like to be done with Verizon once they take away my unlimited plan. I read a few posts where it is said that the cdma phones would work on T-Mobile, the carrier I will be going to next. Can anyone confirm or deny the ability to use on both networks?
Thanks
Yes a Verizon Moto X will work on T-Mobile as it is SIM unlocked and supports band 4 LTE. It should be noted that it doesn't support AWS 3G which is the main band T-Mobile uses for their 3G service. If you are in a refarmed market then they will also offer 3G service on the PCS band which the Verizon Moto X does support. Most major cities are refarmed so as long as you are okay with the risk of ending up on 2G more often then you would on a T-Mobile Moto X then you should be okay. From my understanding T-Mobile is working on having almost all of their 3G service on the PCS band in order to free up AWS spectrum for LTE so this issue should become less of an issue over time.
With kit Kat on my vzw x, when I put my T-Mobile Sim in, I must manually enter T-Mobile APN settings to get working data and SMS. I haven't tried MMS.
With 4.2.2 Roms (version that the phone came with plus camera ota) APN settings came down automatically.
I get h+ in refarmed area.
landale said:
Yes a Verizon Moto X will work on T-Mobile as it is SIM unlocked and supports band 4 LTE. It should be noted that it doesn't support AWS 3G which is the main band T-Mobile uses for their 3G service. If you are in a refarmed market then they will also offer 3G service on the PCS band which the Verizon Moto X does support. Most major cities are refarmed so as long as you are okay with the risk of ending up on 2G more often then you would on a T-Mobile Moto X then you should be okay. From my understanding T-Mobile is working on having almost all of their 3G service on the PCS band in order to free up AWS spectrum for LTE so this issue should become less of an issue over time.
Click to expand...
Click to collapse
I thought the VZW Moto X only supported Band 13 LTE?
binary visions said:
I thought the VZW Moto X only supported Band 13 LTE?
Click to expand...
Click to collapse
It supports both. I've confirmed this with a T-Mobile SIM card and is also stated on the Verizon dev page.
http://developer.verizon.com/content/vdc/en/verizon-devices/pages/mot_moto_x.html
landale said:
It supports both. I've confirmed this with a T-Mobile SIM card and is also stated on the Verizon dev page.
http://developer.verizon.com/content/vdc/en/verizon-devices/pages/mot_moto_x.html
Click to expand...
Click to collapse
Wow, that's interesting. Also interesting that the top section specifically references Band 4, yet the actual spectrum is not called out in the technical section below.
Thanks for the info. This is a surprisingly network-flexible phone... not used to that with Verizon phones.
binary visions said:
Wow, that's interesting. Also interesting that the top section specifically references Band 4, yet the actual spectrum is not called out in the technical section below.
Thanks for the info. This is a surprisingly network-flexible phone... not used to that with Verizon phones.
Click to expand...
Click to collapse
Most of the upper level Verizon LTE phones released this year save the HTC One support band 4 either out of the box or will get a software update for it. Verizon is supposed to be making a big push over the next few months to add band 4 LTE service which is much needed here in Houston as our band 13 LTE service is so overloaded that sometimes I am lucky to top 3-4mbps.
Quite possible that Band 4 support was added in one of the updates that was pushed out, so most documentation wouldn't reference it. Best place to check would be the FCC docs when they tested the phone.
fyrmd said:
I am ready for a new phone, but would like to be done with Verizon once they take away my unlimited plan. I read a few posts where it is said that the cdma phones would work on T-Mobile, the carrier I will be going to next. Can anyone confirm or deny the ability to use on both networks?
Thanks
Click to expand...
Click to collapse
I put a T-mobile SIM in my stock 16GB Verizon Moto x. Here is what works and doesn't.
First off, 4G works! in the South Jersey area and it is Blistering fast, I have exceeded 40MB speed test downloads twice, Several in the high 30s and I am avg in mid 20s. Uploads are averaging 20+/- . Compared to Verizon this is like comparing Fios to 1999 era dial up. the best I ever got on Verizon 4G was 14 download but average between 4 and 9 !
The Network notification switches a lot between 4G, "H" mode, whatever that is, just bars and another which I didn't catch quick enough to read ?
Battery has been amazing compared to my galaxy Nexus, I got 7.5 hours of Actual "Screen on Time" which included some GPS use and an hour of music streaming total phone up time was 34+ hours. How long it will perform like this is anyone's guess, today i got about 6.5 of Screen on time. I hope this inst a trend
Now for the bad news - Using it as a Phone. Incoming calls are fine but, making outgoing is a Pain in the A$$.
When I dial a number, (which is a hassle on this KitKat dialer) it often goes to the home screen or back to the dialer. The Call Fails. I am not sure if my dialer is buggy or its a compatibility problem. the KitKat Dialer on the Moto X is an exorcise in futility. Google are you listening? Why reinvent the wheel. All I want in my Dialer is a Number Pad! and a phone book.
When I Open dialer I see Recent calls up top, the whole middle section says all contacts and is otherwise blank, the bottom has the number pad icon, History and settings dots.
Clicking the number pad icon enlarges the bottom section, which then goes all white and removes the three icons. I have to then click the back arrow and re-click the number pad icon to bring it up the actual dialer. .
At this time I can dial. and then the call always fails on the first attempt. Sometimes it takes several attempts to go through.
When I click send on the dialer the 4G disappears and I am left with just the bars. they come back when call is done but sometimes take a few minutes to do so.
If you Kill the dialer app or swipe it away, coming back to it you will have the same issues when trying to get the number pad (two attempts) if you dont, the number pad will open on first attempt. but the calls will still fail on the first try.
I also cant use the internet when in a call, whether WiFi is on or off. Is this a T-mobile problem? I could use the net in Verizon when in a call when on 4G or WiFi
The Data is set to global mode but I have tried both the other settings. On boot up I get a warning saying the SIM is not recognized which I just swipe away.
I am also having this problem. After making a call, the music player and the phones "volume" aspects cease to work., Meaning, I get no sound out of the phone, Music, notifications alarms etc.. This happens almost every time and the only fix is a reboot
I disabled all Verizon Bloat and a lot of Moto Bloat as well This could be causing some of the bugs? But i have tested several different configurations all with the same outcomes.
Hope this helps and puts an end to the - Will it work or not questions. There seem to be a lot of Net Know it all's that flat out say a Verizon Moto x wont work with a T-Mobile SIM or some other undocumented "fact"
Would a verizon sim work in a sprint or T-moblie phone?
I popped in my T-Mobile Sim card and I only get hspa+. I definitely live in a LTE area. Hmm...
Sent from my XT1060 using Tapatalk
im from india i got moto x navy blue customized but device wont get signal dont know whats wrong tried to reset still no luck even getting the signal but instantly disappears and showing emergency only
So, I have a Verizon Moto X and popped in my T-Mobile sim card today and LTE popped up after a few seconds (I live in Boston). My LTE speeds on the internet worked instantly. However, I tried to send a text message and it wouldn't send. Not sure if I need to do anything else to get voice/text to work fine. Any ideas?
if you're on 4.4, you need to manually add APNs
Kittiesoncrack said:
if you're on 4.4, you need to manually add APNs
Click to expand...
Click to collapse
I just popped in the T-Mo sim card again and now text works no issues and calls. Not sure what happened, but oh well.
Now, is there any difference in me using a Verizon Moto X on T-Mobile compared to an AT&T Moto X on T-Mobile. I have both and have been using an AT&T one, but I am just curious.
NickB2008 said:
Do you know where I can find the APNs to fix this? I know how to access it on the phone, but just so I can find it.
Click to expand...
Click to collapse
http://support.t-mobile.com/docs/DOC-2090 <- That should have everything you need as far as the APN goes.
Guys I have customized Moto x but the gsm doesn't works not Able to connect network even im added apns what could be issue
Sent from my XT1060 using xda app-developers app
I fixed my issue. I ported my number into a Verizon unlimited data plan. Problem solved.
Sent from my XT1060 using Tapatalk
Any help guys how to unlock gsm I can see gsm sim getting signal and immediately loosing and showing emergency only what could be issue
Sent from my XT1060 using xda app-developers app
kae9797 said:
Would a verizon sim work in a sprint or T-moblie phone?
Click to expand...
Click to collapse
no because the sprint x is sim locked and doesn't use the same cdma setup, and the t-mobile doesn't support cdma/evdo that verizon uses for voice and 3g data

[Q] 4G or LTE with Straight Talk AT&T?

After weeks of playing around with build.props, APNs, and patches, on custom ROMs and stock, I am still attempting to get faster and more consistent data.
4G and LTE are supposed to be possible, but I can't figure it out.
I can get around 5 Mbps down using WCDMA only, but the very next moment in the same spot could be something entirely different.
My mobile data goes out quite often where it is just the outline of a triangle. I have never seen any other letters besides an E and a H.
I am currently on stable CM 10.2.1 installed on a newly created and wiped SS Slot 1, and have been for about a week and a half.
I used default network = 0 in build.prop this time around.
I finally managed to get my phone to recognize my SIM card while using the following configuration:
default network in Phone Testing = LTE/GSM/CDMA auto (PRL) and
preferred network mode in Mobile Network Settings = Global (CDMA/EVDO/LTE/GSM/WCDMA).
It acted really strange at first but the settings stayed even after a handful of reboots.
I am using Straight Talk's current APN settings (tfdata).
My dBm is constantly going from about -90 something to -108 and my asu ranges from around 3 to 14.
Before I just now rebooted, and every so often, it shows 2147483647 dBm and 255 asu; I have only just noticed this in the past few days, however. It is now back to -101 dBm and 6 asu after restarting.
I have attached screenshots of it doing that and a shot of "normalcy", as well as my last few speed tests.
Can anyone tell me what I might be doing wrong?
Should I try default network = 10 again in build.prop?
Or could anyone provide a copy of a build.prop working on all possible network modes (with the ability to edit APNs)?
Thanks in advance. I will take any and all advice or opinions.
I am so over trying to figure this out! When I really need my mobile data, it doesn't work!
I have attached a couple of graphs of my signal highs/lows etc. These results are from the Real Signal app.
I don't really know what they mean, but I am hoping they might shed some light on my issue and I'll get an answer from someone.
Sent from my XT875 using xda app-developers app
How are you getting it to get edge data? On mine I either have HSPA or nothing. Is there a way to make it default automatically to edge when the HSPA signal gets weak. I tried using liquid smooth 4.2.2 and changed it to 2g only and never could get signal. Change it to auto and get HSPA again
Sent from my Nexus S using xda app-developers app
should i take the bionic out office space style?
twfs said:
How are you getting it to get edge data? On mine I either have HSPA or nothing. Is there a way to make it default automatically to edge when the HSPA signal gets weak. I tried using liquid smooth 4.2.2 and changed it to 2g only and never could get signal. Change it to auto and get HSPA again
Click to expand...
Click to collapse
Not really sure how, and when it is on Edge, data hardly works anyway, so I probably can't help you there.
But I do have default network = 10. Only other thing I changed was telephony.lteOnCdmaDevice=0 to get the APN menu under mobile networks.
However, at the moment (and the majority of moments), with Wi-fi off, I have no data, -109 dBm, 5 asu, GPRS service is disconnected, and my phone number is "unknown", so I am definitely not in the position for giving suggestions.
Am going to try CM 11 again today, but I was hoping for some answers before doing anything other than installing..
I will ask more specific questions in the hopes that someone, anyone, can provide some sort of idea for at least 1 of them..
Is it even possible for the Bionic to have consistent, non-frustrating access to 2G, 3G, 4G, and LTE when unlocked for the AT&T or T-Mobile networks using Straight Talk?
Is there a way to enable the APN menu without changing the build.prop?
Does anyone have a targa build.prop (entire thing or line changes) of phone that has reliable data, etc. working on 2G, 3G, 4G, and LTE?
Could it be an issue with the SIM card itself?
Am I even approaching this from the right angle?
Should I just give up and get a new phone?
Thanks in advance.
Patch Idea
I am a novice at best and that may be a stretch.
BUT. Both of my Bionics are running on Straight Talk AT&T 4G sim cards.
One is a hardware REV-B the other is hardware REV-C.
The REV-C is rooted and running on the Jelly Bean stock rom.
The REV-B is rooted and running on a MoKee MK4.4 KitKat Release that I downloaded
from their site and opened in "Safestrap".
I do not think that I have achieved 4G yet however,
I do have fairly stable signal and data since
I installed a CDMA to GSM patch that I found searching these forums.
It includes Straight Talk and AT&T APN!
I am not aloud to post links yet. But if you search for these things here you will probably find them fairly quickly.
I would love to know if you can achieve 4G!
Good Luck!
Netzerite

CM 12.1 No LTE Only 3g

On CM 12.1 in Moto X XT1053 that came from stock 5.1. I have download twrp-2.8.7.0-ghost.img, cm-12.1-20151003-NIGHTLY-ghost.zip, and gapps-lp-20141109-signed. I cant seem to get any LTE signal, I only get data when turning lte off and switching to 3g. My network carrier is METROPCS. Thanks in advance.
Found a Fix
So last night i fix it on CM 12.1 buy removing all other APN settings that didn't belong to my network in my case just Metro PCS. After doing so my LTE signal shows and I am getting perfect signal.

OnePlus 3T On Verizon

So I was bored and wanted to play around and try to get this to work. So far I have been successful to get data text and mms working on 3G. Now I have noticed that when I boot the phone that it connects to LTE with a strong signal then it reconnects back to 3G its almost like its possible but something it blocking it. Has anyone had success getting further?
UPDATE: I have gotten FULL LTE on Verizon working. Currently trying to figure out a way to allow CDMA as well for calls
Ya good luck I had same issue as you . Talk text 3g working good. Or LTE only working .Never could figure out how to get them both going
Yea I know after hours of messing around lol and two sim cards wasn't satisfying enough I like the phone enough to jump off big red to try T-Mobile. I honestly like this phone better then my Pixel XL
I ditched my Verizon unlimited data plan for cricket unlimited and have no regrets. Best choice I ever made
joeyac02 said:
So I was bored and wanted to play around and try to get this to work. So far I have been successful to get data text and mms working on 3G. Now I have noticed that when I boot the phone that it connects to LTE with a strong signal then it reconnects back to 3G its almost like its possible but something it blocking it. Has anyone had success getting further?
Click to expand...
Click to collapse
Can you explain in detail exactly how you got this to work? I am dying to get this phone I had 1+1 when first realeased and left Verizon to get it, but now Im back on Verizon with my business phone and want this phone nothing else is close to this phone
bigtymeplayer85 said:
Can you explain in detail exactly how you got this to work? I am dying to get this phone I had 1+1 when first realeased and left Verizon to get it, but now Im back on Verizon with my business phone and want this phone nothing else is close to this phone
Click to expand...
Click to collapse
It won't work it's one or the other. You are wasting your time
The city I live In has Verizon's xlte network and if you upgrade to advanced Calling then voice calls and messages all use 4g LTE data instead of CDMA, so I would only need LTE data to work, I was able to get the 1+1 to get Verizon's signal but after 5 mins they noticed and intentionally blocked me off their Network a message popped up on the 1+1 saying I had been blocked
bigtymeplayer85 said:
The city I live In has Verizon's xlte network and if you upgrade to advanced Calling then voice calls and messages all use 4g LTE data instead of CDMA, so I would only need LTE data to work, I was able to get the 1+1 to get Verizon's signal but after 5 mins they noticed and intentionally blocked me off their Network a message popped up on the 1+1 saying I had been blocked
Click to expand...
Click to collapse
You have to add VoLTE on the phone AND with the carrier. you did both of these options, and t hen were blocked? Did you ever call and ask "why?"?
Thanks
joeyac02 said:
UPDATE: I have gotten FULL LTE on Verizon working. Currently trying to figure out a way to allow CDMA as well for calls
Click to expand...
Click to collapse
Just curious how you have "LTE" activated on the phone. I turned on "only LTE", but I get absolutely nothing. I am only interested in LTE on t he phone, I do not need to make voice calls of SMS
Force LTE provisioning
I know that people had the same issue on the ZTE axon 7 but we're able to force LTE provisioning by going into the dialer and dialing *#*#4636#*#*. This brings up a hidden test menu and under phone information there is a switch for LTE provisioning. It takes a few tries but eventually sticks on the axon. Can someone try this on the one plus phones to see if it works?
I know this has been rehashed many times, but I thought I'd share a my experiences of how to make the 3T usable on Verizon. Main reason I have the 3T is dual SIM and OEM bootloader unlock. Fantastic device. Switched from Verizon to AT&T just for the phone. The problem is my work uses Verizon. I refuse to carry two phones. So what I've done to solve this is bought the GravityBox app, which has a feature that allows, (among many things!) you to add a custom quick setting shortcut for Network Mode. It lets you decide which SIM the setting applies to, as well as any network modes to cycle through when pressing the shortcut. I of course pick the Verizon SIM. And only select two network modes: 1 CDMA only and 2 LTE only. CDMA only allows calls,text and 2G to work perfectly. When a sending or receiving a MMS on Verizon SIM, or needing to use Verizon LTE, I toggle to Verizon LTE only. This does kick AT&T offline for some reason, but beings that I rarely need to use Verizon data, it's not that big of deal.

Verizon branded v40 on Total Wireless (mvno) Keeps turning off HD calling (volte)

Hi all, wondering if anyone can shed some light on this, been bothering me for a while.
I recently moved and noticed that my calls weren't coming through anymore, I dialed a number and the signal dropped from Full 4g LTE to 1x or 1 bar barely when I placed a call. Then when I hang up, right back to full 4g lte the signal goes.( hd calling switches off and grayed out) I am not sure how long this had happened as I never had any problems in my previous home ( had good service). Regardless, I then call chat with total wireless and they "reset my network" then hit *73 and reboot my phone and boom back to full 4g lte even when placing calls and my hd calling is back on and not grayed out. Then the next day or sometimes 3 days later back to 1x and hd calling is off and grayed out until i call/chat with them again. I have asked why this is happening and been told, info was wrong, provisioning was wrong and a bunch of other reasons. Why does this happen, my wife has same phone and same service and hers works perfect.
I have gotten new sim cards, i have reset my phone and still the problem exists.
This phone is a verizon branded phone with factory firmware, not rooted. not flashed.
This has been frustrating.
Thanks to anyone who can provide any insight.
I noticed something familiar on my phone the other day. Despite being fully active on 4G, the phone call was on 1X. I rebooted my phone after a call drop. Not the first time with something somewhat similar. Verizon seems to pick the most damnedest times to perform network maintenance.
Sent from my DROID Turbo using Tapatalk
jaygo444 said:
Hi all, wondering if anyone can shed some light on this, been bothering me for a while.
I recently moved and noticed that my calls weren't coming through anymore, I dialed a number and the signal dropped from Full 4g LTE to 1x or 1 bar barely when I placed a call. Then when I hang up, right back to full 4g lte the signal goes.( hd calling switches off and grayed out) I am not sure how long this had happened as I never had any problems in my previous home ( had good service). Regardless, I then call chat with total wireless and they "reset my network" then hit *73 and reboot my phone and boom back to full 4g lte even when placing calls and my hd calling is back on and not grayed out. Then the next day or sometimes 3 days later back to 1x and hd calling is off and grayed out until i call/chat with them again. I have asked why this is happening and been told, info was wrong, provisioning was wrong and a bunch of other reasons. Why does this happen, my wife has same phone and same service and hers works perfect.
I have gotten new sim cards, i have reset my phone and still the problem exists.
This phone is a verizon branded phone with factory firmware, not rooted. not flashed.
This has been frustrating.
Thanks to anyone who can provide any insight.
Click to expand...
Click to collapse
Depends on factors such as does it have right apn? Unlocked? What mode is it set to such as umts/LTE etc.? Radio band support? Software information? if all are the same as your wife then its a defect and phone needs to be sent in for repair.

Categories

Resources