[RECOVERY][RC] TWRP for the Honor 6 Plus - Honor 6, 6 Plus Android Development

Hi all!
I am working on getting official TWRP support for the Honor 6 (aka 'Mogolia') as I have for the other Huawei / Honor devices.
After creating a basic build tree and doing my own testing, I will be submitting the files for official TWRP support shortly, but in the mean time you can check out the build below. Flash using 'fastboot flash recovery' and, of course, use at your own risk.
Enjoy!
DOWNLOAD - twrp-3.0.2-0-pine-modaco-rc3.img (modified source for /data/share fix)- MD5: ef85886e1a0785c82cab14b95abaa531
P

Dead link
Can you fix it ?

the link is dead.....
is there a mirror ?
thank you

Updated test release posted with manual code change to compensate for internal SD card being /data/share rather than /data/media on this device.
P

Related

[UNIVERSAL]VoLTE Patch v2 for All Android N Roms [Updated: 2.1.17]

What is this?
This is a patch for Kenzo by which you will get volte on any nougat rom (non volte) out there.
Disclaimer:
If you want to add this patch to your rom, please give proper credits and link this thread too.
If you like this, press that thanx button. If you use this, consider donation. :victory:
Requirement:
Redmi note 3 on any rom
Unlocked and with TWRP recovery
VoLTE v3 patch 25-01-17
Instructions:
Clean flash
1. Download any non volte rom
2. Download v3 patch
3. Flash the rom according to instructions provided on rom thread
4. Flash firmware 15-11-16 Credits Newer firmware? Try and report. :good:
5. In the end flash v3 patch
6. Reboot.
Dirty Flash OTA
Flash your rom's ota as you do(without wiping system), no need to flash patch again. It will be auto applied after every dirty flash.
FAQ:
1. VoLTE was not working for 'x' reason on volte enabled rom, will this fix it?
A- It may.
2. Does volte works on second sim?
A- Not tested but should work.
3. Is there or going to be any patch for Marshmallow based roms?
A- Yes. Go here
4. Does this fix 'x' issue i faced on a volte enabled rom?
A- No!
5. Everything above said is checked, still no VoLTE?
A- Check v2 guide and also post #3.
Donations:
Thanx for your kind donations, it helps.
Send me a pm if you have donated, if you want to join telegram group for close testing and support. :highfive:
NVDX11, 99xxxx3869, 97xxxx1652, 94xxxx8709 (AmolAmrit), 89xxxx6581 (hemant_jeengar), 77xxxx8388, 88xxxx9810, 90xxxx4024, 86xxxx0406, 89xxxx8858, 88xxxx9810, asrupesh, 73xxxx6596, MakDroid, BabyTedhu, 95xxxx7623 (vk82119), 81xxxx4723, 73xxxx3906, 88xxxx0101, Pancha5
Credits:
TheStrix
abhishek987
Santhosh M
Telegram Channel for faster ETA's, Changlog: Channel
XDA:DevDB Information
VoLTE Patch Nougat, Tool/Utility for the Xiaomi Redmi Note 3
Contributors
Sudeep Duhoon
Version Information
Status: Stable
Current Stable Version: 3
Stable Release Date: 2016-12-31
Created 2016-11-29
Last Updated 2017-01-25
Changelog and v1 beta patch (old)
Change-log:
25-01-17 v3 released Might be last
Based on TheStrix Commits
13-01-17
Updated with newer files
31-12-16 v2 released
Only 1 zip needed now instead of 2
Universal for nougat
OTA support
64k sim support, no force close
Auto patch, no manual build.prop editing
Reduced size a lot
Don't touce framework-res.apk
Old v2 guide
What is this?
This is a patch for Kenzo by which you will get volte on any nougat rom (non volte) out there.
Disclaimer:
If you want to add this patch to your rom, please give proper credits and link this thread too.
If you like this, press that thanx button. If you use this, consider donation. :victory:
Requirement:
Redmi note 3 on any nougat volte enabled rom (read FAQ #5 too)
Unlocked and with TWRP recovery
VoLTE v2 patch 31-12-16
VoLTE v2 patch 13-01-17
Instructions:
Clean flash
1. Download any non volte rom
2. Download v2 patch
3. Flash the rom according to instructions provided on rom thread
4. In the end flash v2 patch
5. Reboot.
Dirty Flash OTA
Flash your rom's ota as you do(without wiping system), no need to flash patch again. It will be auto applied after every dirty flash.
FAQ:
1. VoLTE was not working for 'x' reason on volte enabled rom, will this fix it?
A- No!
2. Does volte works on second sim?
A- Not tested but should work.
3. Is there or going to be any patch for Marshmallow based roms?
A- Yes. Go here
4. Does this fix 'x' issue i faced on a volte enabled rom?
A- No!
5. Everything above said is checked, still no VoLTE?
A- Check post #3.
Donations:
Thanx for your kind donations, it helps.
Send me a pm if you have donated, if you want to join telegram group for close testing and support. :highfive:
NVDX11, 99xxxx3869, 97xxxx1652, 94xxxx8709 (AmolAmrit), 89xxxx6581 (hemant_jeengar), 77xxxx8388, 88xxxx9810, 90xxxx4024, 86xxxx0406, 89xxxx8858, 88xxxx9810, asrupesh, 73xxxx6596, MakDroid, BabyTedhu, 95xxxx7623 (vk82119), 81xxxx4723, 73xxxx3906, 88xxxx0101, Pancha5
Credits:
abhishek987
TheStrix
Santhosh M
Telegram Channel for faster ETA's, Changlog: Channel
Old v1 guide
What is VoLTE​
Requirement:
Redmi note 3 on Working VoLTE Nougat rom
Unlocked and with TWRP recovery
Instructions:
Auto (Limited):
1. Download Rom from respective thread and follow the instructions given there to flash it.
2. Download the "volte.zip" and "volte_ROMNAME_BUILDDATE.zip" from here. (check the rom name and build date correctly before flashing)
3. Flash "volte_ROMNAME_BUILDDATE.zip"
4. Flash "volte.zip"
5. Wipe cache and dalvik.
6. Reboot. Done!
Notes:
(i) Volte.zip is common for all roms, other rom specific zips will be based on rom name and their build date. This is done to reduce the bandwidth required to download patches.
(ii) If volte not working then download abhishek's firmware from here and flash it. Thanx to xenolith190 for pointing this out.
Manually (No limits):
Additional requirement: A PC with windows (can be done on android too but not included in this tutorial)
1. Download and flash the rom according to the instruction provided on rom's thread.
2. Download apktool and extract/setup in your pc.
3. Use File explorer inTWRP and copy /system/framework/framework-res.apk to /sdcard
4. Connect phone to pc and copy/move framework-res.apk to apktool directory.
5. Open cmd and cd to your apktool dir. And type following commands:
Code:
apktool if framework-res.apk
apktool d framework-res.apk
6. Open to /res/values/bool.xml in text editor (i use notepad++) and change these values to true
Code:
<bool name="config_device_volte_available">true</bool>
<bool name="config_carrier_volte_available">true</bool>
7. Type
Code:
apktool b framework-res
to build apk back.
8. Open new framework-res.apk from apktool/framework-res/dist folder and old framework-res.apk from apktool folder using a zip software like winrar.
9. Drag and copy AndroidManifest.xml and META-INF from old to new apk.
10. Same way drag this new apk to any of the rom specific zip available on this thread and flash as instructed.
NOTES: You need to edit bool.xml in framework-res.apk to enable volte option in rom. Rest of the required libs and files are present in volte.zip and is common for all roms. This tutorial may become more detailed, it completely depends on free time i get. I will not answer any question regarding this in personal messages. If you edit any rom's framework-res.apk please mention me and add that in this thread and i will add you to the op as contributor so you can maintain that rom's future builds too.
Thank you for understanding.
Downloads: HERE
From now on patches will be added here (XDA ERROR:Missing or incorrect project information.)
1. [UNOFFICIAL] ResurrectionRemix 5.8.0 [OTA/OMS] - 20-12-2016
2. [UNOFFICIAL] ResurrectionRemix CK FPC 5.8.0 [OTA/OMS] - 23-12-2016 NOT WORKING (send me framework-res.apk)
3. Mokee 201612230813-NIGHTLY
4. [UNOFFICIAL] ResurrectionRemix 5.8.0 [OTA/OMS] - 23-12-2016
5. [UNOFFICIAL] ResurrectionRemix 5.8.0 [OTA/OMS] - 26-12-2016
Community built patches:
Patch for cosmic os 1st december 2016 build by xenolith190
Patch for BeanStalk 7.1.1 by contactwajeeh
Patch for 08th December Nightly AICP by gulshanstrider
Patch for 08th December nightly AICP by contactwajeeh
Patch for CM Official Nightly's by contactwajeeh
Patch for AOKP 9/12 Build by NVDX11
Patch for CleanRom 9th december 2016 build by xenolith190
Patch for official cm 14.1 nightly 10.12.16 by sarveshrulz
Patch for Cr droid 1.5 by vk82119
Patch for aicp 11th dec build by Sumit Samanta
Patch for aicp 12th dec build by Sumit Samanta
Patch for official cm 14.1 13-12-16 build by ashokumar257
Patch for official cm 14.1 15-12-16 build by ashokumar257
Patch for AICP 19th December build by gulshanstrider
Patch for NucleaRom build by sohail0098
Done:
CM
crDroid 7.1
XenonHD
CM14.1 (TheStrix)
Lineage os by @Infinity
AOSP/CAF
CleanRom
AOSPExtended
halogenOS 7.0
Aoscp 3.1.2
CitrusCAF-kenzo-2.2-LemonDrop-OFFICIAL-20161129 Supports Volte now
AICP Build date 29th October Thanx to skandhan for sending the file
AICP Build date 11th November Thanx to fosterqaz11 for sending the file
Cosmic-OS v1.1
ZephyrOS-7.0-20161130-Viersion-V6.1
Slim7
Mokee 201612110653-NIGHTLY
Mokee 201612230813-NIGHTLY
All requested roms done, for more, please request. If you can link of the thread of requested rom, it will be great.
To Do:
Send rom's framework-res.apk in PM, google drive preferred.
Testing:
NOTE:These are test patches and unlikely to work. You might get a bootloop.
Official CM13 Patch Download Working chances 60%
Resurrection Remix 5.7.4 Patch Download Working chances 5%
FAQ:
1. VoLTE was not working for 'x' reason on volte enabled rom, will this fix it?
A- No!
2. Does volte works on second sim?
A- Not tested, tested with jio sim in first slot, works fine.
3. Is there or going to be any patch for Marshmallow based roms?
A- Test Patches are added, if anyone wants to try.
4. Marshmallow patches are not working?
A- Send me logcat.
5. Does this fix 'x' issue i faced on a volte enabled rom?
A- No!
6. I got com.android.phone force close what should i do?
A- Clean flash the Rom or wait for the fix.
7. Everything above said is checked, still no VoLTE?
A- Check if you have set correct APN for particular sim card and if still VoLTE is not working send me logs.
8. No Audio in calls.
A- Use any root explorer and edit build.prop to change ro.qc.sdk.audio.fluencetype=fluence to ro.qc.sdk.audio.fluencetype=none. Save, set correct permissions and reboot.
9. Got Bootloop on CM Nightly or any other newer rom
A- Decompiling and recompiling alone, without making any changes to framework-res.apk in these roms are causing bootloops, must be issue with apktool/rom. Can't do anything.
XDA:DevDB Information
N Roms VoLTE Patches, Tool/Utility for the Xiaomi Redmi Note 3
Contributors
Sudeep Duhoon
Santhosh M
TheStrix
Akhil Narang
gulshanstrider
contactwajeeh
xenolith190
NVDX11
sarveshrulz
vk82119
Sumit Samanta
Version Information
Status: Beta
Created 2016-11-29
Last Updated 2016-12-30
How to get VoLTE for the first time
Things needed: (things with * is needed for unofficially unlocked device)
1. Redmi note 3 on any rom
2. TWRP recovery
3. A PC with working internet connection
4. USB Cable
5. Mi Unlocker tool (google)
6. Mi Flash tools (google)
7. Any miui fastboot rom, build previous to 6.11.15 build (i use 6.11.3)
8. CM VoLTE by abhishek987
*emmc_aboot (which you used to unlock officially)
*boot.img_patcher.zip
*lazyflasher.zip
Instruction: (steps with * is needed for unofficially unlocked device)
1. Extract miui rom and replace TWRP with recovery.img. *replace emmc_aboot too if unofficially unlocked
2. Reboot device to fastboot and connect it to pc
3. Install/open Mi flash tools and browse to extracted rom's dir
4. Click Flash (your internal storage my get wipes)
5. Monitor the process and when it is near to end keep volume down button pressed
6. Phone will restart to fastboot and use Mi unlocker tool to unlock your bootloader as it may have been relocked *use fastboot command fastboot oem device-info to check status and if locked then use fastboot oem unlock-go to unlock bootloader.
7. Press and hold volume up+power to reboot to twrp
8. Use file manager to check if data is wiped or not, if not the wipe data (not internal sd), wipe cache too *flash lazyflashed and bootimg patcher
9. Reboot and complete initial setup
10. Once you get VoLTE symbol on status bar try to call someone and then reboot to recovery
11. Backup EFS and adspso
12. Flash CM VoLTE according to details provided on thread (skip any custom kernel, gapps, etc)
13. Reboot to check VoLTE working, if not reboot to recovery and restore EFS
14. Once volte gets working, follow post #1 to flash any non volte rom.
is there a link?
42o247 said:
is there a link?
Click to expand...
Click to collapse
seems NO :silly:
Reallyyyy
We can make volte work on non volte roms...!!!!....thats cooolllll
wow you both were fast. still editing. lol
ps. adding link first, will edit later
great...volte for every rom...
Haha... Bro i am waiting add link fast
Link link link.....i cant waitttt
Link plz....
kiran G. said:
Reallyyyy
We can make volte work on non volte roms...!!!!....thats cooolllll
Click to expand...
Click to collapse
BRoy_98 said:
seems NO :silly:
Click to expand...
Click to collapse
42o247 said:
is there a link?
Click to expand...
Click to collapse
silentkiller88 said:
Haha... Bro i am waiting add link fast
Click to expand...
Click to collapse
kiran G. said:
Link link link.....i cant waitttt
Click to expand...
Click to collapse
megatron0110 said:
Link plz....
Click to expand...
Click to collapse
link up for crDroid.
Sudeep Duhoon said:
is there a link?
Haha... Bro i am waiting add link fast
link up for crDroid.
Click to expand...
Click to collapse
For resurrectionRemix?
megatron0110 said:
For resurrectionRemix?
Click to expand...
Click to collapse
it already has volte
Y is it named as crdroid...???....does this work only on crdroid...???
kiran G. said:
Y is it named as crdroid...???....does this work only on crdroid...???
Click to expand...
Click to collapse
yes. only for crDroid. I am uploading XenonHD and CM14.1 fix as well. Slow connection, i need some time.
Sudeep Duhoon said:
yes. only for crDroid. I am uploading XenonHD and CM14.1 fix as well. Slow connection, i need some time.
Click to expand...
Click to collapse
Any screenshot of crdroid ROM that volte is working ?
A Request to OP. Please make a patch for any 7.0 based Rom with OMS commits so that we can enjoy substratum also.
There are many cm14.1 Roms out there but none of them has substratum support
Please make a patch for a ROM with OMS commits
only for crdroid rom?
Can I use this in RR 7.4?

[ROM][7.1.2][OpenKirin's LineageOS 14.1 - Huawei P8Lite ][Update 31/12/2017]

So, since the other thread is pretty clogged up, I have decided to create a new one (even tough I know this is going to get even more clogged up...)
So the day has come, since the closed beta I have fixed some bugs and I have (finally) setup the downloads server, it's the right time.
I am not really good writing this kind of posts, you know what you want, and I am too tired to talk about the risks of not being careful flashing, etc...
Installation Instructions
Your device must be updated to EMUI 4.1 !
You should have already installed TWRP 3.1.1-0 !
Format data in TWRP and reboot device again into TWRP ( if you come from stock EMUI 4.1 )
Wipe Factory Reset in TWRP
Flash LOS 14.1 zip and reboot to System
Reboot device in TWRP and install Gapps ( optional )
Install Magisk or SuperSU if you need ROOT ( optional )
Enjoy
Currently Working List
Audio
Camera fully working with Footej Camera ( via PlayStore )
WiFi
BT with a2dp
dual SIM with data network connecting
Lights
Sensors
Off-mode charging
adb & mtp
Internal/External Storage
Flash
Touch-screen
LiveDisplay
Screenrecord
HWC partially
GPS
NFC
DT2W
Currently Not Working
Encryption
SIM without LTE/4G support
Stock camera video recording, please use Footej Camera via PlayStore !
There may be others small issues !
Downloads
lineage-14.1-20171231_141649-UNOFFICIAL-alice.zip md5 : 1078349b8c78652ba1aaf2ed7548d361
Gapps ( recommended version : ARM64 - 7.1 - nano )
Please use always the latest update from Gapps
Misc
If you have a Honor 4X and the rom isn't compatible (it shouldn't be compatible so don't worry) send me a PM (unless you are @panchovix because I already know that he is interested lol), because I need a little group of people to test the adapted 4X version, but that rom will be published in the correct subforum, so please let's keep it tidy.
Please think before you post, I wouldn't like to reach 50 pages within 2 weeks, so if you just want to post "OMG SO HYPED" do it in the other thread or don't do it at all.
P.S: The Github repo will be updated as fast as I can, I understand that some people want to port roms now that we have reached 'certain stability', but I am just one person and my time is limited.
Kernel GPLv2 compliant : android_kernel_huawei_hi6210sft !
This ROM is provided by OpenKirin TEAM (XePeleato, OldDroid, surdu_petru )​
XDA:DevDB Information
LOS 14.1, ROM for the Huawei P8lite/P8 Lite
Contributors
XePeleato, surdu_petru, OldDroid, olrak2
Source Code: https://github.com/OpenKirin
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Android MM (EMUI 4.1)
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2017-10-15
Created 2017-01-21
Last Updated 2017-12-31
@XePeleato OMG SO HYPED, ok nope haha, thanks man, finally it is here now on XDA, good luck on the rest (because just watching there are just little bugs, atleast for me), as always i say it to you, Good job! and Thanks for remembering us 4X users!
@MarcoPLs @Zizo17 @ericotena @keikari good luck here, we have someone that want to help us send him a PM, and if you know more people using the 4X (i know there are more, probably you that are you reading this :I), PM him (don't comment here, he doesn't want to inundate the thread)
And for you P8 lite users that can get the rom working already, you are lucky! enjoy the rom, for me it is stable for daily use in my case
it's the same rom from the other thread? but on a zip file?
what are the requirements to safely flash this trough twrp?
@Z3NG3R1 this is different one from htcmania, this one has a lot of less bugs, and yes on a zip file
i think you should know how to flash roms at this moment, make a backup and flash it, if something goes wrong restore lol (flashing custom roms has no requeriments, except for having OBV unlocked bootloader and twrp)
Oh wow! So, those are the only bugs? Everything else is up and running? Cool. I'll try this. I can't say thanks enough. @XePeleato the site isn't loading??
@panchovix yeah, I know how to backup and flash a ROM...but what I was saying is that in the toher post, the were saying that you needed a different twrp recovery bro...so that's why I asked...but I'll install it right away then! I'm so happy that this phone is getting custom roms!!!
@Z3NG3R1 oh i see, reading the update binary it seems you need that twrp itself recognizes your phone as hi6210sft (this depends on TWRP) and ALE-L21 (this depends of build.prop), so if you have both you are good
@panchovix well...I think I have both..my twrp version is 3.0.2.0 and my phone is ALE-21 converted to dual sim..do you think I'm good?
Not working Website :crying:
Not working website :crying:
WoW!! Great work thanks!
The Play store is working?
seems the link died or it is saturated, atleast i got the download before the site went down, weird
So, if you get the ear speaker working i will flash it on my Honor 4c, and try it for daily use
Sent from my Honor 4c using Tapatalk.
link error?
link no funciona?
Please report bugs to Xepeleato only with a logcat file. There are free Apps for logcats available in playstore. The Dev can only fix bugs if he knows what went wrong.
http://lineageos.org/Update-and-Build-Prep/
We will NOT be shipping root baked into the ROM.
Root will be a downloadable zip based install similar to gapps installation (only need to flash it once).
Home builders that want to bake su back into the ROM can use the command ‘export WITH_SU=true’ prior to building.
Link is not working
Is there ota updates yet?
Btw https://stats.lineageos.org/
84. hi6210sft 163
panchovix said:
seems the link died or it is saturated, atleast i got the download before the site went down, weird
Click to expand...
Click to collapse
Can you please upload it somewhere
The link is fixed, the backend server died in the middle of the night, it should be fine now.
Sent from my FRD-L04 using Tapatalk

[OREO][MI5s]Project Treble for capricorn

Hello guys! You know I've been out of development for capricorn for a bit! I've been working on this port for a bit, this is for all xiaomi/msm8996-common devices. Project Treble for our phone is here!
Before anything, let's get into it!
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM/KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point your finger at me for messing up your device, I will laugh at you.
* BOOM! goes the dynamite
*/
What is Project Treble:
Project Treble basically partitions your device into two separate partitions, a system and a vendor: system contains your generic system image, while vendor partition has your device specific files required for booting and running your phone. This way we can easily change the system image and be able to run our device on different system images with the same kernel and vendor partition
Read more about Project Treble]
HOW TO:
Download the zip provided here: AndroidFileHost
Extract the zip on your system
Run the script based on your system (sh for linux, bat for windows)
Flash the GSI system image you wish to use
What's Working:
RIL (both SIMs)
Data
Camera
Video
Text
Audio
Bluetooth
Torch
WiFi
Hotspot
Vibrator
Fingerprint
240fps slowmo
GPS
Calls (Mic and Sound)
Camcorder
Fingerprint to wake
Double tap to wake
Display color calibration (KCAL)
Hardware buttons lights
What's NOT Working:
I've tried my best to ensure that everything is working (been testing for about a week)
SELinux status is permissive
Let me know
How to report bugs:
Logcat, a simple description of the bug, kmsg or dmseg depending on the bug
What's Packaged in the zip:
A boot image (kernel)
A vendor image (cust partition)
What's a GSI?
A GSI literally means Generic System Image. It is the a general system image meant for no specific device. Treble enabled devices have the capability to run a GSI. You can find a GSI here: Phh-Treble
Our device's config:
Treble-aonly system image. Our phone only has one system image so it is A-only
Source Code:
Kernel
Vendor blobs
MSM8996-COMMON configuration
capricorn configuration
XDA:DevDB Information
Treble, Tool/Utility for the Xiaomi Mi 5s
Contributors
MZO, LineageOS Maintainers (for Oreo)
Source Code: https://github.com/MZO9400
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2018-03-12
Current Beta Version: 1.5 Beta
Beta Release Date: 2018-02-28
Created 2018-02-27
Last Updated 2018-03-12
Screenshots!
Hey guys, humble request. Please don't bug lineage maintainers over Treble. As our HALs are built for non treble device, and treble requires a different structure of HALs which must connect to system only through hwbinder, I bypassed this right now by putting the system on permissive selinux and removing those policies. But LineageOS doesn't allow that. So unless we get binderized HALs from Xiaomi! Don't complain on Lineage thread. And don't ask them to merge in my changes lol.
As for unofficial guys who want treble. Yes you can use my device and vendor trees on any msm8996-common device (natrium, gemini, capricorn, etc etc) and boot full treble builds on it with ease. Thanks!
What works on Treble?
Any GSI
My AOSiP builds (since I build vendor images on that build)
Any builds using my source code. (yes their system.img will work)
Why doesn't MIUI work on Treble?
Because it wasn't shipped on a treble enabled device
Will custom kernels work on Treble?
Yes, as long as they are updated with source code on my github
LineageOS? No it won't work, explained in the post above.
How does Treble affect custom ROMs?
Peeps over XDA portal summed it up perfectly: Read here
How to fix Google Camera FC?
Flash PHH-TREBLE Vanilla build (latest)
Flash GApps zip
//Currently build with su and gapps causes gcam crash//
GApps won't flash? Not enough space in system
Flash this zip https://goo.gl/MSbGK5
Finally Mi5s has treble. Thanks for your hard work and appreciate your support.
good news, thank you for your hardwork
???
Try to flash IMG from TWRP and it's work:laugh:
Thank you for your greeeeeat work:good:
Amazing job man! Well done!
Never thought that Mi 5s would ever get treble support!! Thank you so much for your work!!!
I've fixed in call systems! Now calls are perfect. Uploading new zip
MZO said:
What works on Treble?
Any GSI
My AOSiP builds (since I build vendor images on that build)
Any builds using my source code. (yes their system.img will work)
Why doesn't MIUI work on Treble?
Because it wasn't shipped on a treble enabled device
Will custom kernels work on Treble?
Yes, as long as they are updated with source code on my github
LineageOS? No it won't work, explained in the post above.
How does Treble affect custom ROMs?
Peeps over XDA portal summed it up perfectly: Read here
Click to expand...
Click to collapse
Did you build AOSiP for Mi5s? Where can i get it? I look at your AFH folder and found nothing.
BajinganTengik said:
Did you build AOSiP for Mi5s? Where can i get it? I look at your AFH folder and found nothing.
Click to expand...
Click to collapse
I've been too lazy to upload and maintain it, but yea will upload it on afh anyways.
fim5646 said:
Try to flash IMG from TWRP and it's work:laugh:
Thank you for your greeeeeat work:good:
Click to expand...
Click to collapse
How did you do it ?? And which image did you use ??
Dark Stranger said:
How did you do it ?? And which image did you use ??
Click to expand...
Click to collapse
You can extract the zip and flash .img files through TWRP. But I wouldn't recommend.
MZO will Luke's Lineage work on this or not?....
MZO said:
You can extract the zip and flash .img files through TWRP. But I wouldn't recommend.
Click to expand...
Click to collapse
Then clarify some things.
I just need to run the script contained in the file to have the basic system or need to install anything else?
And then flash the system GSI image?
I am currently using the Lineage 15.1 rom, is there any problem in running this script on top of it ??
Nice.
Faster ROM than LOS. IMHO.
But I have a bug to ask the manufacturer. But it does not affect the further functioning. Also I need a double tap to sleep, because I have problems with the power button. And also the point of swap buttons is necessary for me.
Standart apps are very ugly eg music and SMS.
My phone have strange name.
In connection with these problems, I will return to LOS.
It would be good if smb told me where I can find some information how I can change img system as I want...
Thank you for work.
James Blode said:
MZO will Luke's Lineage work on this or not?....
Click to expand...
Click to collapse
Maybe if you read OP's 3rd post you can find the answer.
James Blode said:
MZO will Luke's Lineage work on this or not?....
Click to expand...
Click to collapse
Please read the initial posts
Dark Stranger said:
Then clarify some things.
I just need to run the script contained in the file to have the basic system or need to install anything else?
And then flash the system GSI image?
I am currently using the Lineage 15.1 rom, is there any problem in running this script on top of it ??
Click to expand...
Click to collapse
You're correct. You can flash the script but not sure if it will boot.

Question Request to have Eu.Rom 12.5 fastboot version

Hello good day.
sorry if i have to make a new thread but i have a request to all the developers of eu.rom
since the miui 13 doesn't have twrp recovery. can you guys please make a fasboot rom of miui 12 or 12.5?
i have an issue with the miui 13 and i want to rollback to miui 12.5.9, but because there's no twrp recovery for miui 13, the only way to rollback is to download any stock global rom and flash it via miflash tool. if you guys can make at least one eu.rom flashable via fastboot rom, things will get more easier. i really appreciate if you can make one. or if you already have please post a link. thank you and more power to our developers!
jOmzz said:
Hello good day.
sorry if i have to make a new thread but i have a request to all the developers of eu.rom
since the miui 13 doesn't have twrp recovery. can you guys please make a fasboot rom of miui 12 or 12.5?
i have an issue with the miui 13 and i want to rollback to miui 12.5.9, but because there's no twrp recovery for miui 13, the only way to rollback is to download any stock global rom and flash it via miflash tool. if you guys can make at least one eu.rom flashable via fastboot rom, things will get more easier. i really appreciate if you can make one. or if you already have please post a link. thank you and more power to our developers!
Click to expand...
Click to collapse
MIUI 13 has TWRP, only doesn't support decript internal, but you can use SD card or flash disk
[email protected] said:
MIUI 13 has TWRP, only doesn't support decript internal, but you can use SD card or flash disk
Click to expand...
Click to collapse
where can i find the link of twrp for miui 13?
Redmi Note 10 Pro | Updates
#TWRP #Official #Recovery #R #Sweet TWRP 3.6.1 - OFFICIAL | Android 11. Updated: 11/03/'22 ▪️Download ▪️Changelog ▪️XDA ▪️Support Notes: • This release is a bugfix release. We are continuing work on Android 12. There is no ETA currently. (Android 12 is not supported yet and does not...
t.me
[email protected] said:
Redmi Note 10 Pro | Updates
#TWRP #Official #Recovery #R #Sweet TWRP 3.6.1 - OFFICIAL | Android 11. Updated: 11/03/'22 ▪️Download ▪️Changelog ▪️XDA ▪️Support Notes: • This release is a bugfix release. We are continuing work on Android 12. There is no ETA currently. (Android 12 is not supported yet and does not...
t.me
Click to expand...
Click to collapse
but the note said Android 12 is not supported yet.
It's working to flash everything, only can't decript internal storage.
[email protected] said:
It's working to flash everything, only can't decript internal storage.
Click to expand...
Click to collapse
do you mean i just need to install the recovery, wipe dalvik cache and data and flash the miui 12.5.9 stored in my sdcard right? and what do you mean can't decript internal storage? is that mean the files doesn't show in my internal storage that's why i need sdcard or flashdisk?
I would flash stock rom MIUI V12.5.4.0. via fastboot then
install TWRP then
flash miui 12.5.9

[SOLVED] Looking for ROM for Che2-L11

Hi
There's been MANY variants of the Honor 4X and I guess this got me (and maybe others) confused.
I have the Che2-L11 which is "Cherry" and not "Cherryplus". I don't even know what these code-names mean but I guess they reflect some hardware differences.
Anyways, I'm looking for a custom rom for my device (it's now unlocked and twrp is replacing the stock recovery). However, everything I find online is either unavailable (broken links) or incompatible (stated to be compatible with Che2-L11 but actually requires Cherryplus when flashed in twrp).
I can find images for the stock ROMs alright but none of them supports Adoptable Storage (which I need) although the latest ones are Android 6.0.
Could anyone help me here?
Thank you very much
-a-
asheenlevrai said:
Hi
There's been MANY variants of the Honor 4X and I guess this got me (and maybe others) confused.
I have the Che2-L11 which is "Cherry" and not "Cherryplus". I don't even know what these code-names mean but I guess they reflect some hardware differences.
Anyways, I'm looking for a custom rom for my device (it's now unlocked and twrp is replacing the stock recovery). However, everything I find online is either unavailable (broken links) or incompatible (stated to be compatible with Che2-L11 but actually requires Cherryplus when flashed in twrp).
I can find images for the stock ROMs alright but none of them supports Adoptable Storage (which I need) although the latest ones are Android 6.0.
Could anyone help me here?
Thank you very much
-a-
Click to expand...
Click to collapse
the roms for other variants does not work by any chance?
Huawei Honor 4x (China Telecom) (che10) - LineageOS ROMs
LineageOs ROM Huawei Honor 4x (China Telecom) (che10) Official roms Download last nightly build (2020-02-19)LineageOS 15.1 – [ Android 8.1 (Oreo) ] Previous version (nightly) (2020-02-13) LineageOS 15.1 – [ Android 8.1 (Oreo) ] Table of contents Install LineageOS on che10 Basic requirements...
lineageosroms.com
or you dont want to risk bricking?
LR7875 said:
the roms for other variants does not work by any chance?
Huawei Honor 4x (China Telecom) (che10) - LineageOS ROMs
LineageOs ROM Huawei Honor 4x (China Telecom) (che10) Official roms Download last nightly build (2020-02-19)LineageOS 15.1 – [ Android 8.1 (Oreo) ] Previous version (nightly) (2020-02-13) LineageOS 15.1 – [ Android 8.1 (Oreo) ] Table of contents Install LineageOS on che10 Basic requirements...
lineageosroms.com
or you dont want to risk bricking?
Click to expand...
Click to collapse
Che10 is Snapdragon 410. Won't work.
Che2-L11 is Kirin 620
(Cherryplus-L11 is also Kirin 620 AFAIU, but there must be another hardware difference preventing flashing these ROMs onto Cherry devices like Che2-L11)
asheenlevrai said:
Che10 is Snapdragon 410. Won't work.
Che2-L11 is Kirin 620
(Cherryplus-L11 is also Kirin 620 AFAIU, but there must be another hardware difference preventing flashing these ROMs onto Cherry devices like Che2-L11)
Click to expand...
Click to collapse
I think different codename itself will prevent flashing of the rom, without major hardware difference.
Try extract the system.img from the cherry plus l11 rom, move to c drive not under any folder, then execute fastboot command
fastboot flash system C:\system.img
If success then
fastboot -w
fastboot reboot
If the file is system.new.dat or system.bew.dat.br, please tell me
Actually the misunderstanding was on my side!!!
@Bob1900 helped me out realizing the following:
- Che1-XX based on snapdragon 410 are "cherry" devices
- Che2-XX based on Kirin 620 (my device) are "cherryplus" devices
- I flashed a version of twrp that is designed for cherry devices and thus it won't let me flash the custom roms deigned for cherryplus devices while these are the ones I actually need.
Bob1900 pointed to this post which contain a link (not broken, yeah!) to a version of twrp designed for cherryplus devices.
Now I flashed this version of twrp and then flashed a custom rom designed for cherryplus devices (RRos from this post). It's all good now.
I installed RR and from there I could even DL updates for the ROM and for TWRP (now v. 3.2.2 from Ksrt12).
I enabled Adoptable Storage and now I'm testing...
asheenlevrai said:
Actually the misunderstanding was on my side!!!
@Bob1900 helped me out realizing the following:
- Che1-XX based on snapdragon 410 are "cherry" devices
- Che2-XX based on Kirin 620 (my device) are "cherryplus" devices
- I flashed a version of twrp that is designed for cherry devices and thus it won't let me flash the custom roms deigned for cherryplus devices while these are the ones I actually need.
Bob1900 pointed to this post which contain a link (not broken, yeah!) to a version of twrp designed for cherryplus devices.
Now I flashed this version of twrp and then flashed a custom rom designed for cherryplus devices (RRos from this post). It's all good now.
I installed RR and from there I could even DL updates for the ROM and for TWRP (now v. 3.2.2 from Ksrt12).
I enabled Adoptable Storage and now I'm testing...
Click to expand...
Click to collapse
glad you got it working
Good The forum still has enough working DL links to install ROMs on this device, but we sorely need someone to update the code.
Bob1900 said:
Good The forum still has enough working DL links to install ROMs on this device, but we sorely need someone to update the code.
Click to expand...
Click to collapse
I wish @ksrt12 would update the DL link to Slim7 for instance. And also post a ling to that custom twrp v3.2.2 for Cherryplus devices
Not exactly what you asked for, but I am posting a few other versions of TWRP for cherryplus, in case these are useful.
ksrt12 posted a link to one TWRP when he launched the RR here:
RROS v5.8.5 for Honor 4X (Che2-L11) (Kirin 620)
Resurrection Remix Nougat Downloads: RR-N-v5.8.5-20190503-cherryplus-May: SourceForge | MEGA MD5: 6e0f707ba9973cdd1f05ac9c1c90864f * OpenGApps Currently working: * network (2G-LTE) dualsim * Wi-Fi * BT * sdcardfs * GPS * OTG *...
forum.xda-developers.com
This TWRP I found today in my backups and here it is, brand new upload:
TWRP-ksrt12_2017-09-25.img
drive.google.com
I also found one TWRP version for cherryplus posted by MarcoPLs in January 2017, and the original Mega link is still working:
Huawei Honor 4x Che2-L11 Q&A
Please note: This thread is specific to the Che2-L11 model Honor 4x For discussion pertaining to the Che1-L04 model click here. :confused: Because there are some significant differences between the Honor 4x variants information can get...
forum.xda-developers.com
It appears to be version 3.0.2.0. Maybe someone can verify it.
Bob1900 said:
ksrt12 posted a link to one TWRP when he launched the RR here:
RROS v5.8.5 for Honor 4X (Che2-L11) (Kirin 620)
Resurrection Remix Nougat Downloads: RR-N-v5.8.5-20190503-cherryplus-May: SourceForge | MEGA MD5: 6e0f707ba9973cdd1f05ac9c1c90864f * OpenGApps Currently working: * network (2G-LTE) dualsim * Wi-Fi * BT * sdcardfs * GPS * OTG *...
forum.xda-developers.com
Click to expand...
Click to collapse
The link to twrp in the OP is broken.
@krst12 indicates that we can use twrp for Cherry devices and indeed version 3.1.1-0 of twrp would install on Che2-L11 (Cherryplus) and allow to boot into recovery but then it wouldn't let me flash Cherryplus roms (arguing the device is Cherry). Later version of twrp for Cherry would install to the Che2-L11 (Cherryplus) but booting into recovey results ina screen stuck at the Honor logo (while ADB reports the phone is booted into recovery).
asheenlevrai said:
The link to twrp in the OP is broken.
@krst12 indicates that we can use twrp for Cherry devices and indeed some 2017 version of twrp (was it v.3.1.0-0 or 3.1.1-0?) would install on Che2-L11 (Cherryplus) and allow to boot into recovery but then it wouldn't let me flash Cherryplus roms (arguing the device is Cherry). Later version of twrp for Cherry would install to the Che2-L11 (Cherryplus) but booting into recovey results ina screen stuck at the Honor logo (while ADB reports the phone is booted into recovery).
Click to expand...
Click to collapse
so some versions of twrp for a snapdragon variant actually somehow boot on a kirin bariant?
LR7875 said:
so some versions of twrp for a snapdragon variant actually somehow boot on a kirin bariant?
Click to expand...
Click to collapse
Apparently. And this is very difficult to understand for me.
Bob1900 said:
This TWRP I found today in my backups and here it is, brand new upload:
TWRP-ksrt12_2017-09-25.img
drive.google.com
Click to expand...
Click to collapse
this one is v. 3.1.1-krst12 (so an earlier version of the one you can DL from within RRos). Thank you so much
Bob1900 said:
I also found one TWRP version for cherryplus posted by MarcoPLs in January 2017, and the original Mega link is still working:
Huawei Honor 4x Che2-L11 Q&A
Please note: This thread is specific to the Che2-L11 model Honor 4x For discussion pertaining to the Che1-L04 model click here. :confused: Because there are some significant differences between the Honor 4x variants information can get...
forum.xda-developers.com
It appears to be version 3.0.2.0. Maybe someone can verify it.
Click to expand...
Click to collapse
This is actually v. 3.1.0-0 from Roman Horulsky

Categories

Resources