Weird fastboot issue. - Nexus 6 Q&A, Help & Troubleshooting

Alright guys, I'll get right to the point with this one. So I was flashing a stock image to get back to Marshmallow from N preview 3, and for whatever reason, I couldn't get my system partition to flash! It would begin, and then just finish early. When I tried again, it kept telling me that the file was in use in another program. I made a new copy of my platform tools and the stock image I needed, and it did the same thing! My first thought was a corrupted system partition, and I was really hoping it wasn't that. I got it to work using my sister's really really slow Windows Vista laptop (not kidding, took an HOUR to flash) and that worked. Since then I reinstalled windows on my main laptop, but was wondering just what could have caused that? It kept partially flashing the image, and then saying it was in use right after when I tried to do it again. Sorry this isn't too much to go on, I don't have screens or logs or anything to help the case, but suggestions? Thanks all!

H4X0R46 said:
.... I got it to work using my sister's really really slow Windows Vista laptop (not kidding, took an HOUR to flash) and that worked.
Click to expand...
Click to collapse
Hardware issue or wrong drivers. Your PC - USB port - USB cable - drivers or drivers not correct/installed wrong drivers.
Before fastboot check PC in device manager if your phone is recognized.
Download toolkit of wugfresh. After installing there is a sub folder with drivers and also as a sub folder with fastboot and adb.
Install the drivers and use the fastboot/adb and check/try again.

NLBeev said:
Hardware issue or wrong drivers. Your PC - USB port - USB cable - drivers or drivers not correct/installed wrong drivers.
Before fastboot check PC in device manager if your phone is recognized.
Download toolkit of wugfresh. After installing there is a sub folder with drivers and also as a sub folder with fastboot and adb.
Install the drivers and use the fastboot/adb and check/try again.
Click to expand...
Click to collapse
Sure hope it wasn't hardware. That would be bad. My sister's did it without problem despite the amount of time it took lol. I always use my laptop to flash images, it just chose today to do that. It's really weird at that, never seen that happen before. Fastboot devices command showed that it was connect and seen, so that's even more strange.

Also, does anyone know a sure fire way to check if my system partition is actually getting corrupted? Or is that much more extensive?

H4X0R46 said:
Also, does anyone know a sure fire way to check if my system partition is actually getting corrupted? Or is that much more extensive?
Click to expand...
Click to collapse
In case the system partition is corrupted the phone will not boot. And the partition will not mount in TWRP recovery.

NLBeev said:
In case the system partition is corrupted the phone will not boot. And the partition will not mount in TWRP recovery.
Click to expand...
Click to collapse
Well, my device boots and I as able to flash xposed with out and issues so that's not the case. Might have just been my computer acting up. Thanks for your input! It helps a lot!

Related

[Q] HTC One: Think I've Fudged It :(

Hope this is in the right place.
I formatted my HTC1 like an idiot when I meant to wipe and am a little stuck.
ADB doesn't register on my PC so I can't sideload.
No installed ROM so I can't get into the system.
RUU flashes fail with a (remote: 24 parsing android-info fail)
Rooted, S-On and I have custom recovery images... TWRP and CWM...
I've tried everything I can think of and everything google can think of...
Any help at all would be greatly appreciated.
Thanks in advance
If you know someone with an OTG cable you can load it off a thumbdrive
Sent from my Nexus 10 using Tapatalk 4
Check this out:
http://forum.xda-developers.com/showthread.php?t=2325853&highlight=sideload
You should be able to ADB Push a Rom to your phone, then ADB Sideload it. May need to reflash recovery first, I recommend TWRP
altimax98 said:
If you know someone with an OTG cable you can load it off a thumbdrive
Sent from my Nexus 10 using Tapatalk 4
Click to expand...
Click to collapse
Figured this was my only remaining option and have ordered an OTG cable, arrives on Monday was just hoping to find another way so I didn't have to wait.
dgtiii said:
Check this out:
http://forum.xda-developers.com/showthread.php?t=2325853&highlight=sideload
You should be able to ADB Push a Rom to your phone, then ADB Sideload it. May need to reflash recovery first, I recommend TWRP
Click to expand...
Click to collapse
I've tried this and many variants of ADB just isn't recognised on my PC
Thankyou both for your replies they are greatly appreciated!
Rechi03 said:
Figured this was my only remaining option and have ordered an OTG cable, arrives on Monday was just hoping to find another way so I didn't have to wait.
I've tried this and many variants of ADB just isn't recognised on my PC
Thankyou both for your replies they are greatly appreciated!
Click to expand...
Click to collapse
The only thing I can think of then is to find an RUU for your phone hopefully. ADB Push/Sideload normally works in your situation. Try a different cable, different USB port, different computer
dgtiii said:
Check this out:
http://forum.xda-developers.com/showthread.php?t=2325853&highlight=sideload
You should be able to ADB Push a Rom to your phone, then ADB Sideload it. May need to reflash recovery first, I recommend TWRP
Click to expand...
Click to collapse
This guide saved my a$$ too, when I accidentally deleted my system folder. Try a different PC, it works all the time, it will work for you too.
And oh, OTG didn't work for me. I suggest you try a different machine.
humbug got my OTG cable this morning and it appears to work fine... installed Revolution HD 20.1.. tells me install compete and reboots and then brings me to the same blank screen I've been staring at for the last couple of days.
I'm obviously missing something but...
Rechi03 said:
humbug got my OTG cable this morning and it appears to work fine... installed Revolution HD 20.1.. tells me install compete and reboots and then brings me to the same blank screen I've been staring at for the last couple of days.
I'm obviously missing something but...
Click to expand...
Click to collapse
do you have a windows computer?
you most likely just need to install some drivers and then ADB will work.
https://dl.dropboxusercontent.com/u/74163067/HTC ONE DRIVERS.zip
those are the windows drivers. unzip the folder. open device manager. see here http://i.imgur.com/9LeGRJI.png
right click the "htc one" > "update driver software" > "browse my computer" then select the folder where you extracted the zip to. it will automatically install the correct driver. do the same for "my HTC" or any other devices that appear in those two top-level menus.
Have been through multiple drivers, some of which apparently work but still cant find the device when i try to push or sideload.
Have just done a full wipe and am going to attempt starting again from scratch with TWRP and Revolution HD.
Just to clarify I have tried multiple ports and cables, even bought a new USB 3 card, I don't have access to another PC or Laptop.
Rechi03 said:
Have been through multiple drivers, some of which apparently work but still cant find the device when i try to push or sideload.
Have just done a full wipe and am going to attempt starting again from scratch with TWRP and Revolution HD.
Just to clarify I have tried multiple ports and cables, even bought a new USB 3 card, I don't have access to another PC or Laptop.
Click to expand...
Click to collapse
Adb doesn't like usb 3, apparently.. Are you sure you're opening the cmd window from inside the adb/fastboot folder?
Sent from my HTC One using XDA Premium 4 mobile app
sideload is working as I type... it seems flashing recovery as aposed(SP?) to just booting a recovery makes a world of difference, will let you know if the install works. usb3 doesn't seem to be an issue though.
Hussah! It works! Thankyou all for you suggestions and input it has been greatly appreciated!
To flash with adb you need to boot ur phone in recovery mode, not in the bootloader... Took me a while to understand that

[Q] HELP - Bricked HTC One m7vzw (Verizon)

So I got carried away with trying to get rid of that three dot menu button at the bottom of the screen and I've slowly managed to work myself into a really bad problem. I'm not necessarily new to this, I've rooted my Droid 2, Droid 3, and GS3, but this has been more complicated for me.
Anyways, my problem is, I was trying to wipe my phone so that I could flash a ROM. This is because I couldn't access my settings (I overwrote the original in an attempt to get rid of the multitask button). But while I was in CWM I factory reset it but I also accidentally deleted the system. My bootloader is unlocked, but now my phone is on and I can't get into recovery, and I'm assuming it's because the whole system is gone so there's nothing to boot.
Another problem I had (while my phone was able to boot up completely), Android File Transfer wouldn't work, I downloaded a rom for the settings.apk but it wouldn't let me transfer files between my computer and phone. I emailed the .apk to myself but since I couldn't access settings I wasn't able to pick my usual email (although now I'm thinking I should have just used the email I first signed in with). Not as much of a concern but input is still welcome.
I've looked up RUU but it looks like it's not available yet for Verizon. Any possible solutions would be MUCH appreciated.
Don't worry, your device is not bricked.
If your bootloader works well, you must select fastboot and flash the recovery via fastboot.exe in the command line. Now you should be able to get into recovery.
If you wiped your partitions, you can have a trouble with mounting /sdcard. Then you should get an OTG Micro USB cable and put ROM on your USB stick, but I'm not sure if TWRP recovery for HTC One supports mounting flash memory from USB host.
Gudio142 said:
Don't worry, your device is not bricked.
If your bootloader works well, you must select fastboot and flash the recovery via fastboot.exe in the command line. Now you should be able to get into recovery.
If you wiped your partitions, you can have a trouble with mounting /sdcard. Then you should get an OTG Micro USB cable and put ROM on your USB stick, but I'm not sure if TWRP recovery for HTC One supports mounting flash memory from USB host.
Click to expand...
Click to collapse
I'm stuck on the green HTC logo screen and the red warning about the bootloader. I can't boot into recovery anymore. By the way I'm using a Mac but I do have a PC running Windows 8 if there's solutions I could try
Gudio142 said:
Don't worry, your device is not bricked.
If your bootloader works well, you must select fastboot and flash the recovery via fastboot.exe in the command line. Now you should be able to get into recovery.
If you wiped your partitions, you can have a trouble with mounting /sdcard. Then you should get an OTG Micro USB cable and put ROM on your USB stick, but I'm not sure if TWRP recovery for HTC One supports mounting flash memory from USB host.
Click to expand...
Click to collapse
I tried flashing into recovery via fastboot but my computer doesn't recognize my device. And I'm pretty sure I had drivers installed since that's how I unlocked the bootloader in the first place..
xerhoffx said:
I tried flashing into recovery via fastboot but my computer doesn't recognize my device. And I'm pretty sure I had drivers installed since that's how I unlocked the bootloader in the first place..
Click to expand...
Click to collapse
Install the latest drivers and try from a windows 7 pc (or windows 8, win 8.1 doesn't work well)
Reinstall drivers if you haven't already and try the correct file for your 'Modelid' here. It's the only way I got mine to work again after i did the same thing.
Note: The file i used had a different software version but it still flashed ok.
After that, if you can find the right Nandroid you now have the ability to flash that
n1234d said:
Install the latest drivers and try from a windows 7 pc (or windows 8, win 8.1 doesn't work well)
Click to expand...
Click to collapse
I only have Windows 8 I believe...
xerhoffx said:
I only have Windows 8 I believe...
Click to expand...
Click to collapse
Try a different PC, worked for another guy whose pc wouldn't detect his phone. See if a pc with XP works..
ndulian increase
jingles98 said:
Reinstall drivers if you haven't already and try the correct file for your 'Modelid' here. It's the only way I got mine to work again after i did the same thing.
Note: The file i used had a different software version but it still flashed ok.
After that, if you can find the right Nandroid you now have the ability to flash that
Click to expand...
Click to collapse
Where could I find a nandroid for Verizon? I feel like Verizon is the most difficult to find.
FIXED
I was finally able to boot into recovery and thank goodness had a CWM backup. Thanks for your input guys.

Please Help! No system, not showing in fastboot!

Hello,
So I have officially had my first screw up. Rather than getting into what happened and explaining what a retard I am, I will make a long story short.
I can not boot into my OS to activate USB debugging. So when I am in bootloader, no fastboot devices are showing. I have no backup. I can however get into TWRP! What do I do? Can I flash system.img in TWRP? If not I think I am screwed... Any help would be greatly appreciated right now! I am kind of freaking out.
I am newer to Android. My Nexus 6 is my first Android Phone. Why am I flashing stuff and not having a backup? Because I am stupid and did not put it on a flash drive when I clean installed Windows 10 on my computers new SSD.
EDIT: Problem solved and I apologize for wasting all of your time. Apparently I did know what I was doing. (Kinda... lol) I did a clean install of Windows 10 on my laptop today because I got a new Samsung 850 Pro SSD. Apparently when I installed the Android SDK Platform tools and google drivers the drivers did not "take". So here I am freaking out, wondering why my Nexus 6 was not being recognized as a fastboot device, and the damn driver wasn't even installed. I had to go into device manager and hold my laptops hand / point it directly to the google drivers folder. My laptop still made the sound when I plugged it in so I didn't think the drivers were the issue. But oh well...
I can't believe how fast I had a few different people willing to help! I really appreciate it and it is good to know that help is here when needed!
Rektifying said:
Hello,
So I have officially had my first screw up. Rather than getting into what happened and explaining what a retard I am, I will make a long story short.
I can not boot into my OS to activate USB debugging. So when I am in bootloader, no fastboot devices are showing. I have no backup. I can however get into TWRP! What do I do? Can I flash system.img in TWRP? If not I think I am screwed... Any help would be greatly appreciated right now! I am kind of freaking out.
I am newer to Android. My Nexus 6 is my first Android Phone. Why am I flashing stuff and not having a backup? Because I am stupid and did not put it on a flash drive when I clean installed Windows 10 on my computers new SSD.
Click to expand...
Click to collapse
you can sidelod any rom(and gapps) via adb or with twrp, then flash it in twrp.
simms22 said:
you can sidelod any rom(and gapps) via adb or with twrp, then flash it in twrp.
Click to expand...
Click to collapse
Can I flash system.img in twrp ? I decided to wipe dalvik, system, data, internal storage, and cache before flashing MRA58N. I guess I wasn't thinking obviously. Being now when in bootloader mode my device isn't recognized.
I really don't know how or what to do. I have all of the images for MRA58N and I have access to twrp. I have no idea what to do now. I am noob with TWRP. Do I have to use the mount feature or ?
I'm really freaking out here. I have my Nexus 6 in TWRP right now, hooked to my computer. I am to scared to do anything! My phone is literally wiped, so I don't even get how TWRP is on it to be honest. lol
If no devices are showing in fastboot then you should check your drivers on your computer. And TWRP only allows you to flash .img files on recovery and boot partitions.
Even though this thread doesn't have the newest update you might be able to replace the .img files in the zip with the ones you have, OR you can just use the 58K build to get you bootable.
I have to system.img on my phone in the TWRP folder. When I click install, then images, It only gives me Boot and Recovery for "Select Partition to flash image"
With the phone in bootloader mode and connected to pc you can use fastboot not adb. That's how you flash the factory images.
With the phone in twrp and connected to pc you should see your phone and its internal storage from the pc. Drag and drop a rom zip to your internal storage and flash a rom.. Can also go to 'advanced' in twrp and adb sideload rom-name.zip.
If the phone doesn't show up on your PC in either mode you need the latest USB drivers, or check device manager.
Sent from my Nexus 6 using Tapatalk
yes because twrp will only allow you to flash your boot and recovery partitions if you're using .img files,
Go to that thread I listed above and grab the zip file for the MRA58K the one labeled as "Base."
Transfer it to your phone though a usb cable while in twrp. Then flash it and when it gets done reboot to system.
Your phone should be on Marshmallow and you can give your factory .img files another shot.
Thank you all for the advice. Especially StykerB for being more specific. I wasn't sure if I needed more than one zip or just the base. I should be good now. Right now I am uninstalling the google usb drivers and re-installing them. I just installed them today.... So I do not get it. My Nexus 6 shows up on my computer while in twrp but not for fastboot in bootloader. makes no sense. Or maybe it does?
I wonder wtf is going on. I have the google usb drivers installed, but my computer is not recognizing my Nexus 6. That is why I am having problems. I was going to say, I have flashed .img's to my Nexus 6 many times now. That is why I started freaking out when no matter what I did I could not get fastboot to see my Nexus 6. I am going to look into this USB driver issue first. If I can fix that I can flash the images the normal way and be done with it.
I wan't to thank you all and apologize for wasting your time. I thought I knew what I was doing, and I actually did. I installed a new Samsung 850 Pro SSD in my laptop today. I did a clean install for obvious reasons. Well when I installed the Android SDK platform tools and Google USB drivers, for some reason the USB drivers didn't "take". Even when I re-installed them they didn't. I had to go in device manager with my N6 plugged in, and hold my computers hand and point it directly to the google folder. Once I did that the driver installed and I was good to go.
It is good to know that help is definitely here if needed. You all responded very fast! Before I knew it I had a few different people helping / ready to help. Thank you all again!

Help. Nexus 6 not recognized via adb, fastboot.

Nexus 6 running android 7.0 developer preview. I tried to flash something and the device went haywire. Booted into TWRP to try to restore a backup kept getting unable to mount storage error. Decided I would wipe everything and boot into bootloader and flash a factory image via fastboot. Always a very easy way to make sure everything gets fixed! The device will not not communicate with anything. Let me preface this by saying I have searched all the various threads regarding updating drivers etc.....
When I say my device won't communicate with anything I mean AT ALL. Device isn't detectable using ADB while booted into recovery, It isn't detected using "fastboot devices" command while booted into bootloader. Keep getting the "waiting for device' I tried to update the drivers in windows, but the phone no longer shows up in the Device Manager on my Windows laptop which makes it impossible to update the drivers. I also know my drivers are not the problem. I have a Nexus 6p which communicates perfectly on my Mac, on my Windows PC, via ADB and Fastboot..... I tried to see if my mac would recognize the device, so i tried all of the above on my mac to no avail. I also tried to place a rom file on a usb drive, use an adapter to connect the usb to the phone and jump it onto the phones internal storage. No matter the size of file I place on the usb, it always shows as 196Mb, TWRP lets me switch to OTG usb to install the file, but the shows no files on the jump drive.
So I have a phone that will boot into TWRP, but I can't move any files onto my internal storage in order to flash them. I can also boot into the bootloader fine, but the devices isn't recognized so I can't flash a stock Img.
It seems I am screwed at this point. Tried Wugfresh Nexus Root Toolkit as well and get the same "waiting for device" error.
Anybody got anything I can try to bring this thing back to life?
2gskaizen said:
Anybody got anything I can try to bring this thing back to life?
Click to expand...
Click to collapse
Sounds like maybe a wonky usb port. Maybe dirt stuck in there? Maybe replace it (there are videos out there). Maybe just pull the back and push it gently to see if it works then.

I don't know what's going on... (Brick?)

[EDIT: It's all good now... A stupid mistake of mine]
Ok, everything was fine... I was on PE and everything was normal. Then I wanted to try something out and cleared everything in TWRP and rebooted to fastboot, because I needed a different version of TWRP...
But once in fastboot and connected to my PC adb couldn't detect my device (list of devices attached is empty), so I can't flash twrp -> I can't do anything! I'm simply stuck in fastboot...
After a bit of googling i found out that I somehow had the wrong drivers installed, so I went into device manager and it showed some kind of "kedacom usb drivers". I tried every tutorial that is on the internet, but nothing worked. In the end I somehow got it changed to the regular "Android device -> Android ADB Interface"(how it used to- and should be?) from those "kedacom usb drivers" and I thought I found the solution, but it still doesn't recognize my device in adb I also tried the MiFlash tool - same thing
Is it possible that my mistake was not enabling usb-debugging beforehand and can I somehow get out of fastboot?
I would be so grateful if anyone was able to help me
Moischen said:
Ok, everything was fine... I was on PE and everything was normal. Then I wanted to try something out and cleared everything in TWRP and rebooted to fastboot, because I needed a different version of TWRP...
But once in fastboot and connected to my PC adb couldn't detect my device (list of devices attached is empty), so I can't flash twrp -> I can't do anything! I'm simply stuck in fastboot...
After a bit of googling i found out that I somehow had the wrong drivers installed, so I went into device manager and it showed some kind of "kedacom usb drivers". I tried every tutorial that is on the internet, but nothing worked. In the end I somehow got it changed to the regular "Android device -> Android ADB Interface"(how it used to- and should be?) from those "kedacom usb drivers" and I thought I found the solution, but it still doesn't recognize my device in adb I also tried the MiFlash tool - same thing
Is it possible that my mistake was not enabling usb-debugging beforehand and can I somehow get out of fastboot?
I would be so grateful if anyone was able to help me
Click to expand...
Click to collapse
what the
why dint u just save the new twrp to internal, boot to twrp, flash the new twrp image as recovery m thats it reboot to twrp and it will be the new one you flashed.
you dint have to wipe anything or use pc
Mooatreides said:
what the
why dint u just save the new twrp to internal, boot to twrp, flash the new twrp image as recovery m thats it reboot to twrp and it will be the new one you flashed.
you dint have to wipe anything or use pc
Click to expand...
Click to collapse
Yeah, good question... But it's too late for that now
Try another pc
emprazol said:
Try another pc
Click to expand...
Click to collapse
same thing
Manually install adb driver
Moischen said:
same thing
Click to expand...
Click to collapse
One time, I had such an issue with drivers, what I did is use a free VM machine software on Windows to install a Linux distro (or you could dual boot it), and from Linux it worked to detect my device.
On the other hand, there are really probably easier ways to fix your issue, but who knows, it may help and does not take too long.

Categories

Resources