Hey guys,
When I boot my phone it'll only give me the HTC splash screen. I can manage to get my phone to boot into clockwork or the bootloader but nothing else.
My phone is S-ON with USB debugging disabled. Hboot is 1.56.
Is it a lost cause?
mucka1916 said:
Hey guys,
When I boot my phone it'll only give me the HTC splash screen. I can manage to get my phone to boot into clockwork or the bootloader but nothing else.
My phone is S-ON with USB debugging disabled. Hboot is 1.56.
Is it a lost cause?
Click to expand...
Click to collapse
USB debugging doesnt matter in custom recovery (CWM or TWRP), you can use one of these methods to get a ROM onto your phone, while in custom recovery:
1- OTG Cable
2- adb push <name of rom>.zip /sdcard/
3- adb sideload <name of rom>.zip
if you're going to flash a 4.4 ROM then you best use TWRP (the correct one for your phone model), and if you're going to flash a GPe ROM you need to be S-Off.
nkk71 said:
USB debugging doesnt matter in custom recovery (CWM or TWRP), you can use one of these methods to get a ROM onto your phone, while in custom recovery:
1- OTG Cable
2- adb push <name of rom>.zip /sdcard/
3- adb sideload <name of rom>.zip
if you're going to flash a 4.4 ROM then you best use TWRP (the correct one for your phone model), and if you're going to flash a GPe ROM you need to be S-Off.
Click to expand...
Click to collapse
Ok so I'm using TWRP and managed to get Maximus Rom installed but now the touch screen won't respond on lock screen.
Driver compatibility maybe? The ROM seemed to install fine and I ran fastboot flash boot boot.img.
Does it have to be a OTG cable? Standard USB seems to be working fine for the most part.
Thanks
mucka1916 said:
Ok so I'm using TWRP and managed to get Maximus Rom installed but now the touch screen won't respond on lock screen.
Driver compatibility maybe? The ROM seemed to install fine and I ran fastboot flash boot boot.img.
Does it have to be a OTG cable? Standard USB seems to be working fine for the most part.
Thanks
Click to expand...
Click to collapse
1- post a "fastboot getvar all" (excluding IMEI and s/n)
2- what version of TWRP are you using (don't say "latest" please)
3- which ROM (link please) and version number
4- did you really need to "fastboot flash boot boot.img." ? was it indicated in the thread?
nkk71 said:
1- post a "fastboot getvar all" (excluding IMEI and s/n)
2- what version of TWRP are you using (don't say "latest" please)
3- which ROM (link please) and version number
4- did you really need to "fastboot flash boot boot.img." ? was it indicated in the thread?
Click to expand...
Click to collapse
Excuse me. Its little bit OT but can you help me with this http://forum.xda-developers.com/showthread.php?t=2670857
? Thank you.
Hi.
my problem is that my phone does not up, just stay in a htc logo. it is root and has a cwm installed.
I need a way to pass cyanogemod to its internal memory or a way to install a rom from the pc.
Thanks.
hackeadorazo said:
Hi.
my problem is that my phone does not up, just stay in a htc logo. it is root and has a cwm installed.
I need a way to pass cyanogemod to its internal memory or a way to install a rom from the pc.
Thanks.
Click to expand...
Click to collapse
your question, isn't very clear, and it's missing "fastboot getvar all" (excluding IMEI and s/n)... so that we know what device you have.
it's also missing, what you were trying to install, etc.
but in short, to get a ROM to install use either:
1- OTG cable
2- adb push
3- adb sideload
if you're trying to install a 4.4 ROM then CWM may not work, and you'll need to switch to TWRP.
nkk71 said:
your question, isn't very clear, and it's missing "fastboot getvar all" (excluding IMEI and s/n)... so that we know what device you have.
it's also missing, what you were trying to install, etc.
but in short, to get a ROM to install use either:
1- OTG cable
2- adb push
3- adb sideload
if you're trying to install a 4.4 ROM then CWM may not work, and you'll need to switch to TWRP.
Click to expand...
Click to collapse
I tried to install TWRP and success. but when enter to recovery the touch isn't response and the power button don't power off.
I don't know to do.
the phone still s-on, is necesary s-off to can install a rom?
how can I Power off the phone.
please help me.
I Attached a picture.
thank
hackeadorazo said:
I tried to install TWRP and success. but when enter to recovery the touch isn't response and the power button don't power off.
I don't know to do.
the phone still s-on, is necesary s-off to can install a rom?
how can I Power off the phone.
please help me.
I Attached a picture.
thank
Click to expand...
Click to collapse
outdated recovery, please post a fastboot getvar all (excluding IMEI and s/n), so we can see what device you're on.
nkk71 said:
outdated recovery, please post a fastboot getvar all (excluding IMEI and s/n), so we can see what device you're on.
Click to expand...
Click to collapse
Hi.
I Attached a picture to the phone fastboot.
i hope you can help me.
thanks.
hackeadorazo said:
Hi.
I Attached a picture to the phone fastboot.
i hope you can help me.
thanks.
Click to expand...
Click to collapse
next time just copy/past a fastboot getvar all (excluding IMEI, s/n and in your case MEID)
m7_wls = Sprint?
then get recovery from: http://techerrata.com/browse/twrp2/m7wls
(verify MD5!!!!)
then install a ROM compatible with Sprint.
nkk71 said:
next time just copy/past a fastboot getvar all (excluding IMEI, s/n and in your case MEID)
m7_wls = Sprint?
then get recovery from: http://techerrata.com/browse/twrp2/m7wls
(verify MD5!!!!)
then install a ROM compatible with Sprint.
Click to expand...
Click to collapse
I installed the recovery and the rom (cm10.1) by adb push, I have some issues with gsm and cdma but everything is ok and I know the way to flash another rom.
really thank you so much.
Hello. im new here and i ive just bricked my phone , and i wana get back to stock RUU and i dont know whick RUU to download anny sollutions how to check what RUU do i need? Ps.sorry for my bad english. Anny help would be awesome
ubas98 said:
Hello. im new here and i ive just bricked my phone , and i wana get back to stock RUU and i dont know whick RUU to download anny sollutions how to check what RUU do i need? Ps.sorry for my bad english. Anny help would be awesome
Click to expand...
Click to collapse
post the ouput of "fastboot getvar all" except the IMEI and SERIALNO so we can help you determine which RUU you can use if any available for your phone.
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4T.27.3218.14
OpenDSP -v32.120.274.0909
OS-5.16.161.2 eMMC-boot 2048MB
Ive writed everything that i saw on my screen.if i mised anything please tell me
ubas98 said:
M7_UL PVT SHIP S-ON RH
HBOOT-1.57.0000
RADIO-4T.27.3218.14
OpenDSP -v32.120.274.0909
OS-5.16.161.2 eMMC-boot 2048MB
Ive writed everything that i saw on my screen.if i mised anything please tell me
Click to expand...
Click to collapse
that's not your fastboot getvar all, however, the most important part is there which is your OS number, 5.16.161.2 is Vodafone, there is no RUU for your device, do you not have a backup ? how did you brick ?
Seanie280672 said:
that's not your fastboot getvar all, however, the most important part is there which is your OS number, 5.16.161.2 is Vodafone, there is no RUU for your device, do you not have a backup ? how did you brick ?
Click to expand...
Click to collapse
well ive wanted to get to stock so i unlocked my bootloader and tried to install ruu but it failed. and because i locked the bootloader ive somehow bricked my phone one cm11 loading screen. ive unlocked my bootloader and my recovery was all mesed up it couldnt load anny storage so i cant instal other rooms so im stuck here .i have no clue what to do
ubas98 said:
well ive wanted to get to stock so i unlocked my bootloader and tried to install ruu but it failed. and because i locked the bootloader ive somehow bricked my phone one cm11 loading screen. ive unlocked my bootloader and my recovery was all mesed up it couldnt load anny storage so i cant instal other rooms so im stuck here .i have no clue what to do
Click to expand...
Click to collapse
well as your s-on, you can forget about any RUU's at all for now.
I would recommend you flash twrp recovery, use 2.6.3.3 and then erase cache, then reboot bootloader (see commands below).
Code:
fastboot flash recovery (name of recovery).img
fastboot erase cache
fastboot reboot-bootloader
after that go into twrp recovery and select wipe then format data, this will completely wipe your phone of everything, but as its already messed up then it doesn't really matter, does it.
once that is done, download a sense rom from the development section and try and push it to your internal sdcard, if successful then flash it.
Seanie280672 said:
well as your s-on, you can forget about any RUU's at all for now.
I would recommend you flash twrp recovery, use 2.6.3.3 and then erase cache, then reboot bootloader (see commands below).
Code:
fastboot flash recovery (name of recovery).img
fastboot erase cache
fastboot reboot-bootloader
after that go into twrp recovery and select wipe then format data, this will completely wipe your phone of everything, but as its already messed up then it doesn't really matter, does it.
once that is done, download a sense rom from the development section and try and push it to your internal sdcard, if successful then flash it.
Click to expand...
Click to collapse
well everything worked but when i enter recovery mode it askes me a pasword and i dont know it anny solution?
ubas98 said:
well everything worked but when i enter recovery mode it askes me a pasword and i dont know it anny solution?
Click to expand...
Click to collapse
password ? never seen that before, could you post a photo of it ?
Seanie280672 said:
password ? never seen that before, could you post a photo of it ?
Click to expand...
Click to collapse
http://postimg.org/image/ucolu3a83/ here is the img
ubas98 said:
http://postimg.org/image/ucolu3a83/ here is the img
Click to expand...
Click to collapse
I have never seen that before in all my years of using TWRP, maybe one of the other guys can help you with that
Seanie280672 said:
I have never seen that before in all my years of using TWRP, maybe one of the other guys can help you with that
Click to expand...
Click to collapse
maybe i could use another recovery .if yes anny what is other best recovery?
ubas98 said:
maybe i could use another recovery .if yes anny what is other best recovery?
Click to expand...
Click to collapse
oh somehow the pasword screen went out and now im in the recovery in which folder i could trasfer my rom to the phone?
ubas98 said:
oh somehow the pasword screen went out and now im in the recovery in which folder i could trasfer my rom to the phone?
Click to expand...
Click to collapse
adb push it straight to the sdcard, make sure your phone is plugged into the computer and the rom is in the same folder as adb and fastboot files, then issue this command:
Code:
adb push (name of rom).zip /sdcard/
it will look like its not doing anything but will let you know when its done, then uplug your phone before flashing the rom.
and both TWRP and CWM have their good points, you need CWM to flash AOSP rom's and TWRP to flash sense rom's
Seanie280672 said:
well as your s-on, you can forget about any RUU's at all for now.
I would recommend you flash twrp recovery, use 2.6.3.3 and then erase cache, then reboot bootloader (see commands below).
Code:
fastboot flash recovery (name of recovery).img
fastboot erase cache
fastboot reboot-bootloader
after that go into twrp recovery and select wipe then format data, this will completely wipe your phone of everything, but as its already messed up then it doesn't really matter, does it.
once that is done, download a sense rom from the development section and try and push it to your internal sdcard, if successful then flash it.
Click to expand...
Click to collapse
Strangely this is exactly the position I'm in today too.
I wanted to revert to stock after trying cyanogen, relocked the bootloaded and tried to run an RUU. However it stopped with an 'unknown error'. So I tried to push a zip file to it but the adb can't connect to the device and the phone isn't showing up in the device manager (because it's in boot mode?).
I then tried your advice about twrp and tried a different RUU but still get an unknown error and still can't push to the device.
Any ideas of what to try next? My OS is now showing as empty, there was something there previously.
I figured it was time to get some help before I broke things any more.
SGSII_LEDnotify said:
Strangely this is exactly the position I'm in today too.
I wanted to revert to stock after trying cyanogen, relocked the bootloaded and tried to run an RUU. However it stopped with an 'unknown error'. So I tried to push a zip file to it but the adb can't connect to the device and the phone isn't showing up in the device manager (because it's in boot mode?).
I then tried your advice about twrp and tried a different RUU but still get an unknown error and still can't push to the device.
Any ideas of what to try next? My OS is now showing as empty, there was something there previously.
I figured it was time to get some help before I broke things any more.
Click to expand...
Click to collapse
first thing to do is unlock your bootloader again, if you've not already done that, then get TWRP 2.6.3.3 recovery on there, that maybe a problem though as your phone isn't showing in device manager.
So put your phone into the bootloader and see what device manager says then, it should say something if its detecting your phone, even if drivers arnt installed.
also, which HBOOT are you on ? and which Windows OS are you using ?
Seanie280672 said:
first thing to do is unlock your bootloader again, if you've not already done that, then get TWRP 2.6.3.3 recovery on there, that maybe a problem though as your phone isn't showing in device manager.
So put your phone into the bootloader and see what device manager says then, it should say something if its detecting your phone, even if drivers arnt installed.
also, which HBOOT are you on ? and which Windows OS are you using ?
Click to expand...
Click to collapse
I think I've unlocked the bootloader again, fastboot is available and it's showing 'unlocked' at the top. twrp is on there too and I've done the wipe again. The fastboot commands work but pushing doesn't
error: device not found
HBOOT is 1.55.0000 / win7 64 home
Btw Twrp said it couldn't find cache but the wipe was successful.
Thanks for the help.
SGSII_LEDnotify said:
I think I've unlocked the bootloader again, fastboot is available and it's showing 'unlocked' at the top. twrp is on there too and I've done the wipe again. The fastboot commands work but pushing doesn't
error: device not found
HBOOT is 1.55.0000 / win7 64 home
Btw Twrp said it couldn't find cache but the wipe was successful.
Thanks for the help.
Click to expand...
Click to collapse
ok I see what your saying now, what you need to do is boot into TWRP, main screen only, no sub menu's, at that point is your phone still detected in device manager ?
if so then............
put the rom you want to flash in the same folder as adb and fastboot files on your computer, then type:
Code:
adb push (name of rom).zip /sdcard/
you cant push files to your phone using fastboot or whilst its in the bootloader, that's strictly for flashing simple files like Radio's, HBOOTS, recoveries.
Seanie280672 said:
ok I see what your saying now, what you need to do is boot into TWRP, main screen only, no sub menu's, at that point is your phone still detected in device manager ?
if so then............
put the rom you want to flash in the same folder as adb and fastboot files on your computer, then type:
Code:
adb push (name of rom).zip /sdcard/
you cant push files to your phone using fastboot or whilst its in the bootloader, that's strictly for flashing simple files like Radio's, HBOOTS, recoveries.
Click to expand...
Click to collapse
Well at least I've got something in the device manager even if it is a SAMSUNG Android Phone and not my HTC!
The push command hasn't brought up an error, the cursor is just flashing on the next line. It appears to be doing nothing like you said. So I guess I'm playing the waiting game for ten minutes or so. Will there be a notification when it's completed?
---------- Post added at 08:03 PM ---------- Previous post was at 08:00 PM ----------
Ok, transfer complete
SGSII_LEDnotify said:
Well at least I've got something in the device manager even if it is a SAMSUNG Android Phone and not my HTC!
The push command hasn't brought up an error, the cursor is just flashing on the next line. It appears to be doing nothing like you said. So I guess I'm playing the waiting game for ten minutes or so. Will there be a notification when it's completed?
---------- Post added at 08:03 PM ---------- Previous post was at 08:00 PM ----------
Ok, transfer complete
Click to expand...
Click to collapse
ok, unplug your phone, then goto install and select the rom from the list you just pushed, follow the Aroma options and instructions and also id recommend when given the option, to wipe data.
Seanie280672 said:
ok, unplug your phone, then goto install and select the rom from the list you just pushed, follow the Aroma options and instructions and also id recommend when given the option, to wipe data.
Click to expand...
Click to collapse
I renamed the zip file because there were spaces in the name causing errors, would that cause a failure when trying to install?
skipping MD5 check: no md5 file found
Error flashing zip '/sdcard/****.zip'
updating partition details
failed
Hi everyone, my phone is Htc one m7 swisscom, The other day I made the update then is restart and did not work anymore, just rebooted. I made factory reset and all files have been deleted. I tried then to go into recovery to install any other version of Android but not boot recovery. I have tried different recovery by installed, but when I try to go into recovery, and not boot ...
If anyone can help me, what else should do??? Thnx.
Mar1nc3 said:
Hi everyone, my phone is Htc one m7 swisscom, The other day I made the update then is restart and did not work anymore, just rebooted. I made factory reset and all files have been deleted. I tried then to go into recovery to install any other version of Android but not boot recovery. I have tried different recovery by installed, but when I try to go into recovery, and not boot ...
If anyone can help me, what else should do??? Thnx.
Click to expand...
Click to collapse
First you should check the FAQ and see the information needed to make a request for help. We need the results from fastboot getvar all (minus your serial no. and IMEI). This will tell your software version, your mid, your cid, so we can try and help you find the files to fix your phone
Try to flash a costume Recovery
Sent from my GT-I9082 using xda app-developers app
clsA said:
First you should check the FAQ and see the information needed to make a request for help. We need the results from fastboot getvar all (minus your serial no. and IMEI). This will tell your software version, your mid, your cid, so we can try and help you find the files to fix your phone
Click to expand...
Click to collapse
@Mar1nc3
You could have posted it here, your phone is
hboot: 1.57
s-on
5.16.161.2
VODAP110
You have to go to HTCDEV.com and unlock your bootloader to flash roms
Unlock the bootloader at HTCDEV
then from fastboot USB
Flash recovery TWRP 2.6.3.3
http://techerrata.com/browse/twrp2/m7
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
then sideload this Rom to your phone
http://www.androidrevolution.org/downloader/download.php?file=Android_Revolution_HD-One_84.0.zip
TWRP / Advanced / ADB Sideload - swipe to sideload
From PC adb / fastboot folder
you use
adb sideload name-of-rom.zip
make sure the rom is in the same folder as adb / fastboot
Click to expand...
Click to collapse
Ok, thank you for help (Y)
Hi guys i got an htc one in placw of my samsung grand
I managed to unlock the bootloader using cmd and tried flashing a recovery. However after the flash when i try booting into recovery mode from bootloader, it first gives the entering recovery screen but then screen blacks out and then it reboots as normal.
Now htc just got a lollipop update and i want to update, but when it enters recovery, it blacks out and then reboots as normal due to the fail recovery
Before i tried flashing each and every reocvery and the same happened... Then i just left it at a version of cwm ( didnt work also) .
Now shall i flash stock recovery? What if that dosent work? Is there any way to do it without a pc or any other computer?
arushawasthi said:
Hi guys i got an htc one in placw of my samsung grand
I managed to unlock the bootloader using cmd and tried flashing a recovery. However after the flash when i try booting into recovery mode from bootloader, it first gives the entering recovery screen but then screen blacks out and then it reboots as normal.
Now htc just got a lollipop update and i want to update, but when it enters recovery, it blacks out and then reboots as normal due to the fail recovery
Before i tried flashing each and every reocvery and the same happened... Then i just left it at a version of cwm ( didnt work also) .
Now shall i flash stock recovery? What if that dosent work? Is there any way to do it without a pc or any other computer?
Click to expand...
Click to collapse
no .. you will need a PC to restore stock recovery / or RUU back to stock
Darn
clsA said:
no .. you will need a PC to restore stock recovery / or RUU back to stock
Click to expand...
Click to collapse
Hi,
Thanks for the reply.
I tried RUU, turns out theres no file for my cid (HTC_039).
I also tried alternate methods, turns out i cant use Guru reset as i need functioning recovery, and i have S-ON so no Nand.
pl help.
arushawasthi said:
Hi,
Thanks for the reply.
I tried RUU, turns out theres no file for my cid (HTC_039).
I also tried alternate methods, turns out i cant use Guru reset as i need functioning recovery, and i have S-ON so no Nand.
pl help.
Click to expand...
Click to collapse
Did you use the correct version of the recovery you flashed? I mean are you sure it wasn't a Sprint or Verizon recovery?
Secondly did you fastboot erase cache after flashing recovery?. This is the no.1 reason for recovery bootloop. Flashing recovery should be done like so.
Code:
fastboot erase cache
fastboot flash recovery "name-of-recovery".img
fastboot reboot-bootloader
Then select recovery from the bootloader for the first time load.
Sent from my M7 ARHD 84-Kitkat
arushawasthi said:
I tried RUU, turns out theres no file for my cid (HTC_039).
Click to expand...
Click to collapse
Yes there is one. 7.19.980.5 posted in the general section
http://forum.xda-developers.com/htc-one/general/lollipop-ruu-zip-small-collection-t3053944
see post #2.
If your phone is already on a 6.xx.980.x or 7.xx.980.x firmware you can flash it.
Danny201281 said:
Did you use the correct version of the recovery you flashed? I mean are you sure it wasn't a Sprint or Verizon recovery?
Secondly did you fastboot erase cache after flashing recovery?. This is the no.1 reason for recovery bootloop. Flashing recovery should be done like so.
Code:
fastboot erase cache
fastboot flash recovery "name-of-recovery".img
fastboot reboot-bootloader
Then select recovery from the bootloader for the first time load.
Sent from my M7 ARHD 84-Kitkat
Click to expand...
Click to collapse
Hi,
i didnt do the exact thing. Ill try like you said.
And how do i find out my firmware version? In settings?
arushawasthi said:
Hi,
i didnt do the exact thing. Ill try like you said.
And how do i find out my firmware version? In settings?
Click to expand...
Click to collapse
To find your firmware version it's best to use command
Code:
fastboot getvar all
this will show you a list of your devices version information.
You can post the list here if you need help but please remove your imei and serial number before posting for your own security.
There are 3 models of HTC One.
Sprint = m7_wls Downloads here http://techerrata.com/browse/twrp2/m7wls
Verizion = m7_vzw Downloads here http://techerrata.com/browse/twrp2/m7vzw
International = m7_ul or m7_u Downloads here http://techerrata.com/browse/twrp2/m7
There are also more model numbers for dual sim variants.
You must have the correct version of recovery depending on your model. The getvar info would be very helpful for me to make a recommendation :good:
Sent from my SM-T230 using Tapatalk