Database Develop

Moto G 4G/LTE XT1072 Bricked?

Hi,
i have a Moto G 4G 2015 alias Thea alias Model XT1072 and i cant restore Stock.
I have installed the Downgrade_RETDEALL_XT1068_4.4.4_KXB21.85-14_cid7_CFC and think here i have killed the phone..
i know it is the wrong firmware, i have realized this too late... dont ask why....
so I have downloaded RETDEALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml and RETEUALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml.
But the errors when i try flashing via (m)fastboot are the same
Code:
mfastboot flash partition gpt.bin
fastboot error:
Code:
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
on the display
Code:
version downgraded for primary_gpt
Code:
mfastboot flash motoboot motoboot.img
fastboot error:
Code:
writing 'motoboot'...
(bootloader) Motoboot: Preflash validation for tz
(bootloader) Preflash validation failed
FAILED (remote failure)
on the display
Code:
version downgraded for tz
Code:
mfastboot flash system system.img_sparsechunk.0
fastboot error:
Code:
writing 'system'...
(bootloader) Preflash validation failed
FAILED (remote failure)
on the display
Code:
Image is too large
So why is the Image too large?
getvar all :
(bootloader) version: 0.5
(bootloader) version-bootloader: 4883(*)
(bootloader) product: titan
(bootloader) secure: yes
(bootloader) hwrev: 0x8500
(bootloader) radio: 0x1
(bootloader) emmc: 8GB ID=15 REV=06 PRV=02 TYPE=17
(bootloader) ram: 1024MB Samsung S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8926
(bootloader) serialno: ZX1C2233HX
(bootloader) cid: 0x0007
(bootloader) channelid: 0x45
(bootloader) uid:
(bootloader) unlocked: yes
(bootloader) securestate: unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) meid:
(bootloader) date: 03-10-2015
(bootloader) sku: XT1072
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Wed Feb 25 7:52:56 UTC 2015"
(bootloader) ro.build.fingerprint[0]: motorola/titan_retaildsds/titan_um
(bootloader) ro.build.fingerprint[1]: tsds:5.0.2/LXB22.99-16/10:user/rel
(bootloader) ro.build.fingerprint[2]: ease-keys
(bootloader) ro.build.version.full[0]: Blur_Version.22.41.16.titan_retai
(bootloader) ro.build.version.full[1]: ldsds.retaildsdsall.en.03
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-g48d3b85 ([email protected]
(bootloader) kernel.version[1]: ilclbld31) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Tue Jan 6 10:47:29 CST 2015
(bootloader) sdi.git: git=MBM-NG-V48.83-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V48.1D-0-g7e74e90
(bootloader) rpm.git: git=MBM-NG-V48.83-0-g20516c3-dirty
(bootloader) tz.git: git=MBM-NG-V48.83-0-g31cba28
(bootloader) aboot.git: git=MBM-NG-V48.83-0-g67407e2
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe: qe 1/1
(bootloader) productid:
(bootloader) sutinfo:
(bootloader) ro.carrier: retde
all: listed above
Is the problem
Code:
(bootloader) product: titan
or any other bootloader settings?
Any ideas?

Hi,
twister_65 said:
i have a Moto G 4G 2015 alias Thea alias Model XT1072 and i cant restore Stock.
I have installed the Downgrade_RETDEALL_XT1068_4.4.4_KXB21.85-14_cid7_CFC and think here i have killed the phone..
i know it is the wrong firmware, i have realized this too late... dont ask why....
so I have downloaded RETDEALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml and RETEUALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml.
But the errors when i try flashing via (m)fastboot are the same
Code:
mfastboot flash partition gpt.bin
fastboot error:
Code:
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
on the display
Code:
version downgraded for primary_gpt
Code:
mfastboot flash motoboot motoboot.img
fastboot error:
Code:
writing 'motoboot'...
(bootloader) Motoboot: Preflash validation for tz
(bootloader) Preflash validation failed
FAILED (remote failure)
on the display
Code:
version downgraded for tz
Code:
mfastboot flash system system.img_sparsechunk.0
fastboot error:
Code:
writing 'system'...
(bootloader) Preflash validation failed
FAILED (remote failure)
on the display
Code:
Image is too large
So why is the Image too large?
getvar all :
(bootloader) version: 0.5
(bootloader) version-bootloader: 4883(*)
(bootloader) product: titan
(bootloader) secure: yes
(bootloader) hwrev: 0x8500
(bootloader) radio: 0x1
(bootloader) emmc: 8GB ID=15 REV=06 PRV=02 TYPE=17
(bootloader) ram: 1024MB Samsung S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8926
(bootloader) serialno: ZX1C2233HX
(bootloader) cid: 0x0007
(bootloader) channelid: 0x45
(bootloader) uid:
(bootloader) unlocked: yes
(bootloader) securestate: unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) meid:
(bootloader) date: 03-10-2015
(bootloader) sku: XT1072
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Wed Feb 25 7:52:56 UTC 2015"
(bootloader) ro.build.fingerprint[0]: motorola/titan_retaildsds/titan_um
(bootloader) ro.build.fingerprint[1]: tsds:5.0.2/LXB22.99-16/10:user/rel
(bootloader) ro.build.fingerprint[2]: ease-keys
(bootloader) ro.build.version.full[0]: Blur_Version.22.41.16.titan_retai
(bootloader) ro.build.version.full[1]: ldsds.retaildsdsall.en.03
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-g48d3b85 ([email protected]
(bootloader) kernel.version[1]: ilclbld31) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Tue Jan 6 10:47:29 CST 2015
(bootloader) sdi.git: git=MBM-NG-V48.83-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V48.1D-0-g7e74e90
(bootloader) rpm.git: git=MBM-NG-V48.83-0-g20516c3-dirty
(bootloader) tz.git: git=MBM-NG-V48.83-0-g31cba28
(bootloader) aboot.git: git=MBM-NG-V48.83-0-g67407e2
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe: qe 1/1
(bootloader) productid:
(bootloader) sutinfo:
(bootloader) ro.carrier: retde
all: listed above
Is the problem
Code:
(bootloader) product: titan
or any other bootloader settings?
Any ideas?
Click to expand...
Click to collapse
HI,
I have done exactly the same thing as you and facing the same problem while flashing the XT1072 stock firmware.
Could please let me know if you have found any solution.
Thanks

@twister_65 @omarhowlader: U both can now save for a new device, have fun.

LuK1337 said:
@twister_65 @omarhowlader: U both can now save for a new device, have fun.
Click to expand...
Click to collapse
wish you could help with your experience!!!

omarhowlader said:
wish you could help with your experience!!!
Click to expand...
Click to collapse
You can't recover your phone from wrong bootloader

luca020400 said:
You can't recover your phone from wrong bootloader
Click to expand...
Click to collapse
Why not?
I mean, is it a technical limitation? Then why can i install the old one.

twister_65 said:
Why not?
I mean, is it a technical limitation? Then why can i install the old one.
Click to expand...
Click to collapse
Because your device is technically dead xd

luca020400 said:
Because your device is technically dead xd
Click to expand...
Click to collapse
that helps now .......

twister_65 said:
that helps now .......
Click to expand...
Click to collapse
Try to flash motoboot.img from that http://www.filefactory.com/file/2zt...LXB22.99-24_cid12_subsidy-DEFAULT_CFC.xml.zip
It's the only thing that may help you lol.

LuK1337 said:
Try to flash motoboot.img from that http://www.filefactory.com/file/2zt...LXB22.99-24_cid12_subsidy-DEFAULT_CFC.xml.zip
It's the only thing that may help you lol.
Click to expand...
Click to collapse
twister_65 said:
that helps now .......
Click to expand...
Click to collapse
Did it work

Shawn5162 said:
Did it work
Click to expand...
Click to collapse
My device is currently on its way back from a service stadion, but they did not repaired it...

twister_65 said:
My device is currently on its way back from a service stadion, but they did not repaired it...
Click to expand...
Click to collapse
Is that because you broke Motorola's warranty terms of service by unlocking bootloader and flashing? Or is it a lost cause?

Addapp said:
Is that because you broke Motorola's warranty terms of service by unlocking bootloader and flashing? Or is it a lost cause?
Click to expand...
Click to collapse
Did anyone achieved to solve this problem? I am facing exactly the same issue.
The thing is that the Motorola naming is quite confusing and it is very easy to make a mistake between the different Moto Gs, so I flashed the stock ROM of a previous version and when I realized it, it was too late.
I suppose I have the wrong bootloader as it keeps giving me these "image is too large" messages when I try to flash the correct stock rom. I can install CM and other custom roms from TWRP, however at least the camera won't work.
If anyone has found a workaround, please share with us how you do it.

como vc conseguiu pisca? to com o mesmo problema: P

e2_e2 said:
Did anyone achieved to solve this problem? I am facing exactly the same issue.
The thing is that the Motorola naming is quite confusing and it is very easy to make a mistake between the different Moto Gs, so I flashed the stock ROM of a previous version and when I realized it, it was too late.
I suppose I have the wrong bootloader as it keeps giving me these "image is too large" messages when I try to flash the correct stock rom. I can install CM and other custom roms from TWRP, however at least the camera won't work.
If anyone has found a workaround, please share with us how you do it.
Click to expand...
Click to collapse
I've managed to fix my problem, I installed the correct TWRP recovery for my model and managed to install CM THEA and everything is working flawlessly.
The problem is that installing an incorrect recovery will mess the partition, I am sure I can go back to stock now if I use ADB to reflash, but I dont want do go back anymore, there is a bunch of new options avaliable im CM will wont even want the simple stock rom never again. Just Install the correct TWRP for your model and Install a custom rom , it will fix the partition and probably you will be able to reflash to stock using ADB.
This is the correct TWRP for XT1078
https://dl.twrp.me/thea/

twister_65 said:
Hi,
i have a Moto G 4G 2015 alias Thea alias Model XT1072 and i cant restore Stock.
I have installed the Downgrade_RETDEALL_XT1068_4.4.4_KXB21.85-14_cid7_CFC and think here i have killed the phone..
i know it is the wrong firmware, i have realized this too late... dont ask why....
so I have downloaded RETDEALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml and RETEUALL_XT1072_5.0.2_LXB22.46-28_cid7_subsidy-DEFAULT_CFC.xml.
But the errors when i try flashing via (m)fastboot are the same
Code:
mfastboot flash partition gpt.bin
fastboot error:
Code:
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
on the display
Code:
version downgraded for primary_gpt
Code:
mfastboot flash motoboot motoboot.img
fastboot error:
Code:
writing 'motoboot'...
(bootloader) Motoboot: Preflash validation for tz
(bootloader) Preflash validation failed
FAILED (remote failure)
on the display
Code:
version downgraded for tz
Code:
mfastboot flash system system.img_sparsechunk.0
fastboot error:
Code:
writing 'system'...
(bootloader) Preflash validation failed
FAILED (remote failure)
on the display
Code:
Image is too large
So why is the Image too large?
getvar all :
(bootloader) version: 0.5
(bootloader) version-bootloader: 4883(*)
(bootloader) product: titan
(bootloader) secure: yes
(bootloader) hwrev: 0x8500
(bootloader) radio: 0x1
(bootloader) emmc: 8GB ID=15 REV=06 PRV=02 TYPE=17
(bootloader) ram: 1024MB Samsung S4 SDRAM DIE=4Gb
(bootloader) cpu: MSM8926
(bootloader) serialno: ZX1C2233HX
(bootloader) cid: 0x0007
(bootloader) channelid: 0x45
(bootloader) uid:
(bootloader) unlocked: yes
(bootloader) securestate: unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) mot_sst: 3
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei:
(bootloader) meid:
(bootloader) date: 03-10-2015
(bootloader) sku: XT1072
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Wed Feb 25 7:52:56 UTC 2015"
(bootloader) ro.build.fingerprint[0]: motorola/titan_retaildsds/titan_um
(bootloader) ro.build.fingerprint[1]: tsds:5.0.2/LXB22.99-16/10:user/rel
(bootloader) ro.build.fingerprint[2]: ease-keys
(bootloader) ro.build.version.full[0]: Blur_Version.22.41.16.titan_retai
(bootloader) ro.build.version.full[1]: ldsds.retaildsdsall.en.03
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-g48d3b85 ([email protected]
(bootloader) kernel.version[1]: ilclbld31) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Tue Jan 6 10:47:29 CST 2015
(bootloader) sdi.git: git=MBM-NG-V48.83-0-gdc5aeaf
(bootloader) sbl1.git: git=MBM-NG-V48.1D-0-g7e74e90
(bootloader) rpm.git: git=MBM-NG-V48.83-0-g20516c3-dirty
(bootloader) tz.git: git=MBM-NG-V48.83-0-g31cba28
(bootloader) aboot.git: git=MBM-NG-V48.83-0-g67407e2
(bootloader) partition-type: raw
(bootloader) partition-size:
(bootloader) qe: qe 1/1
(bootloader) productid:
(bootloader) sutinfo:
(bootloader) ro.carrier: retde
all: listed above
Is the problem
Code:
(bootloader) product: titan
or any other bootloader settings?
Any ideas?
Click to expand...
Click to collapse
Hello! I spend my same ... first thing you have to do is fix the bootloader using a command
" fastboot oem fb_mode_clear "
takes 10 seconds , once restored the fastboot install the firmware you had of stock again , I recommend unlock booloader for. I hope you serve , Greetings !

mega_vpr said:
Hello! I spend my same ... first thing you have to do is fix the bootloader using a command
" fastboot oem fb_mode_clear "
takes 10 seconds , once restored the fastboot install the firmware you had of stock again , I recommend unlock booloader for. I hope you serve , Greetings !
Click to expand...
Click to collapse
Did not work for me
mihilux said:
it will fix the partition and probably you will be able to reflash to stock using ADB.
Click to expand...
Click to collapse
Not really. I can use an CM AOSP flawlessly as you mention, but if you need to go back to stock (for example, if your phone hardware breaks), you won't be able to flash to the right stock rom unfortunatelly. Is not a 100% bricked phone but is a technically bricked phone, since NAND has been messed up by flashing accidentally with a wrong ROM. As you say this Motorola versioning system is really an issue in terms of deriving to bricked devices

MiSSigNNo said:
Did not work for me
Not really. I can use an CM AOSP flawlessly as you mention, but if you need to go back to stock (for example, if your phone hardware breaks), you won't be able to flash to the right stock rom unfortunatelly. Is not a 100% bricked phone but is a technically bricked phone, since NAND has been messed up by flashing accidentally with a wrong ROM. As you say this Motorola versioning system is really an issue in terms of deriving to bricked devices
Click to expand...
Click to collapse
I've the same problem, but I can go back to Stock Rom 5.0.2 though ADB and bootloader, the problem is that in the Stock Rom or CM13, CM12 my cellphone dont recognize the SIM card and the wifi =/. Someone with the same problem?

[XT1097 AT&T] Last Time Flashing Failed Bootloop

Well.. I may have messed up beyond belief.
I accidentally ordered the AT&T variant instead of going with XT1095, and instead of returning it, I figured I'd unlock it and convert.
To my error, I tried CF-Auto-Root-victara-victararetbr-xt1097 with a locked bootloader and I was put into a bootloop with the error "Fastboot Reason: Last time flashing failed"
Am I screwed? Are there ways to fix this new $325 brick?
I just remembered, I have my old XT1095 IMEI and bootloader code. Is there anyway to flash my XT1097 with those numbers so my phone can pretend to be my old 'Pure' edition and be able to unlocked?

Have you check unlocking the bootloader from motorola site? I heared xt1097 is also unlocking now via motorola website, you can also try these lines hope it will help you reboot in fastboot first then type these:
Fastboot reboot-bootloader
Fastboot oem fb_mode_set
Fastboot erase cache
Fastboot oem fb_mode_clear
Fastboot reboot
Hope you will get the device back running.. If these didnt help kindly get back here.. And dont try any imei tweak etc you will hard brick that

Salik Iqbal said:
Have you check unlocking the bootloader from motorola site? I heared xt1097 is also unlocking now via motorola website, you can also try these lines hope it will help you reboot in fastboot first then type these:
Fastboot reboot-bootloader
Fastboot oem fb_mode_set
Fastboot erase cache
Fastboot oem fb_mode_clear
Fastboot reboot
Hope you will get the device back running.. If these didnt help kindly get back here.. And dont try any imei tweak etc you will hard brick that
Click to expand...
Click to collapse
I've tried what you posted to no avail.
I've been trying to download VICTARA_ATT_XT1097_5.1_LPE23.32-21.9_cid1_CFC.xml.zip or VICTARA_ATT_XT1097_5.1_LPE23.32-21.2_cid1_CFC.xml.zip from FileFactory, but because i'm using the "Slow Speed" download(50Kb/s), it keeps failing, so I haven't even been able to try flashing the official ATT Victara firmware.
I'm almost positive it's because the partition was flashed over... so I'm hoping if I can get one of these files downloaded, I can try flashing the original gpt.bin and it boot fine..
Any other ideas would be extremely helpful.
If this helps, this is all the info from my bootloader
AP Fastboot Flash Mode (S)
60.16 (sha-496ce05,c2015-04-02 18:55:00)
CPU: MSM8974AC ES1.1
eMMC: 32GB Samsung RV=07 PV=0B TY=57
DRAM: 2048MB Elpida S8 SDRAM DIE=4GB
Battery OK
Device is LOCKED. Status Code: 0
Software status: Official

Fastboot getvar all
Paste the output pls

Salik Iqbal said:
Fastboot getvar all
Paste the output pls
Click to expand...
Click to collapse
I just need VICTARA_ATT_XT1097_5.1_LPE_23.32-21.9 gpt.bin if I do belive so myself. Teach me if i'm wrong, I truly am interested in learning this stuff!
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 6016
(bootloader) product: victara
(bootloader) secure: yes
(bootloader) hwrev: 0x82BF
(bootloader) radio: 0x1
(bootloader) emmc: 32GB Samsung REV=07 PRV=0B TYPE=57
(bootloader) ram: 2048MB Elpida S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8974AC ES1.1
(bootloader) serialno: TA449074CQ
(bootloader) cid: 0x0001
(bootloader) channelid: 0x84
(bootloader) uid: 6FD5BD0D0B000000000000000000
(bootloader) unlocked: no
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: ***************
(bootloader) meid:
(bootloader) date: 02-11-2016
(bootloader) sku: XT1097
(bootloader) iccid:********************
(bootloader) cust_md5: ********************************
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sat Jun 28 20:20:35 UTC 2014"
(bootloader) ro.build.fingerprint[0]: motorola/victara_att/victara:5.1/L
(bootloader) ro.build.fingerprint[1]: PE23.32-21.9/3:user/release-keys
(bootloader) ro.build.version.full[0]: Blur_Version.23.16.9.victara_att.
(bootloader) ro.build.version.full[1]: att.en.US
(bootloader) ro.build.version.qcom[0]: AU_LINUX_ANDROID_LNX.LA.3.5.1_RB1
(bootloader) ro.build.version.qcom[1]: .04.04.02.048.045
(bootloader) version-baseband[0]: MSM8974BP_4235210.110.09.11R VICTARA_A
(bootloader) version-baseband[1]: TT_CUST
(bootloader) kernel.version[0]: Linux version 3.4.42-gff6f5d9 ([email protected]
(bootloader) kernel.version[1]: ilclbld32) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Tue Sep 29 04:22:36 CDT 2015
(bootloader) sdi.git: git=MBM-NG-V60.16-0-g582b967
(bootloader) sbl1.git: git=MBM-NG-V60.16-0-gfd10553
(bootloader) rpm.git: git=MBM-NG-V60.16-0-gc54d917
(bootloader) tz.git: git=MBM-NG-V60.16-0-g04e322b
(bootloader) aboot.git: git=MBM-NG-V60.16-0-g496ce05
(bootloader) qe: qe 0/0
(bootloader) ro.carrier: att
all: listed above
finished. total time: 0.101s

you need full flash, not just gpt.bin.. if you did flashing this gpt only, you will have dead bricked device.. check the pvt msg i gave you fast download link there.. download rsd lite, unzip that and flash the full stock rom.. good luck!

Salik Iqbal said:
you need full flash, not just gpt.bin.. if you did flashing this gpt only, you will have dead bricked device.. check the pvt msg i gave you fast download link there.. download rsd lite, unzip that and flash the full stock rom.. good luck!
Click to expand...
Click to collapse
THANK YOU! I really appreciate it, you have no idea how happy I am.
RSD Lite and fastboot, gives me the error: version downgraded for primary_gpt.

ibphantom said:
THANK YOU! I really appreciate it, you have no idea how happy I am.
RSD Lite and fastboot, gives me the error: version downgraded for primary_gpt.
Click to expand...
Click to collapse
It was latest that i gave you..

Salik Iqbal said:
It was latest that i gave you..
Click to expand...
Click to collapse
Uhh... so what could the problem be? lol.

ibphantom said:
THANK YOU! I really appreciate it, you have no idea how happy I am.
RSD Lite and fastboot, gives me the error: version downgraded for primary_gpt.
Click to expand...
Click to collapse
There are other att files on that folder, download and check if they work for you.. Also edit the xml abd remove two lines gpt.bin and motoboot.img start it with boot.img

Salik Iqbal said:
There are other att files on that folder, download and check if they work for you.. Also edit the xml abd remove two lines gpt.bin and motoboot.img start it with boot.img
Click to expand...
Click to collapse
I removed
<step MD5="72167323145a532c1158c13f8543e6d3" filename="gpt.bin" operation="flash" partition="partition"/>
<step MD5="a942904bb71a2ba69c27a440e1f9801e" filename="motoboot.img" operation="flash" partition="motoboot"/>
and it flashed up to the boot.img
I got another 'Version Downgraded' error for boot
Does it matter that my bootloader CPU is MSM8974AC ES1.1 and the release keys are for MSM8974BP_4235210.110.09.11R?

I have same problem please somehow help me too
I can't flash boot.img
(bootloader) version: 0.5
(bootloader) version-bootloader: 6016
(bootloader) product: victara
(bootloader) secure: yes
(bootloader) hwrev: 0x82BF
(bootloader) radio: 0x1
(bootloader) emmc: 16GB Samsung REV=07 PRV=0B TYPE=57
(bootloader) ram: 2048MB Elpida S8 SDRAM DIE=4Gb
(bootloader) cpu: MSM8974AC ES1.1
(bootloader) serialno: TA98901CI9
(bootloader) cid: 0x0001
(bootloader) channelid: 0x84
(bootloader) uid: F9FED40C0B000000000000000000
(bootloader) unlocked: no
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: UTAG "bootmode" configured as fastboot
(bootloader) imei: 359279050697553
(bootloader) meid:
(bootloader) date: 09-16-2014
(bootloader) sku: XT1097
(bootloader) iccid: 89014103286416801740
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Mon Feb 22 11:45:36 UTC 2016"
(bootloader) ro.build.fingerprint:
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version[0]: Linux version 3.4.42-gff6f5d9 ([email protected]
(bootloader) kernel.version[1]: ilclbld32) (gcc version 4.8 (GCC) ) #1 S
(bootloader) kernel.version[2]: MP PREEMPT Tue Sep 29 04:22:36 CDT 2015
(bootloader) sdi.git: git=MBM-NG-V60.16-0-g582b967
(bootloader) sbl1.git: git=MBM-NG-V60.16-0-gfd10553
(bootloader) rpm.git: git=MBM-NG-V60.16-0-gc54d917
(bootloader) tz.git: git=MBM-NG-V60.16-0-g04e322b
(bootloader) aboot.git: git=MBM-NG-V60.16-0-g496ce05
(bootloader) qe: qe 0/0
(bootloader) ro.carrier: att
all: listed above
finished. total time: 0.092s
Click to expand...
Click to collapse

MrSaba said:
I have same problem please somehow help me too
I can't flash boot.img
Click to expand...
Click to collapse
Does anybody know how to erase the gpt.bin so that I can flash stock?
I flashed from XT1095 gpt.bin and now I get the "Version Downgraded for primary_gpt" error.

ibphantom said:
Does anybody know how to erase the gpt.bin so that I can flash stock?
I flashed from XT1095 gpt.bin and now I get the "Version Downgraded for primary_gpt" error.
Click to expand...
Click to collapse
Is your bootloader locked? It must be unlocked to flash firmware from other models as well as to downgrade.
Sent from my XT1095 using Tapatalk

AGISCI said:
Is your bootloader locked? It must be unlocked to flash firmware from other models as well as to downgrade.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Yeah, it's locked. I was just asking in hope that someone had a work around.
I guess I'll try to ship it back to Motorola(since it's within 14 days) and pretend I never even turned it on and ask for the PURE as a replacement.

ibphantom said:
Yeah, it's locked. I was just asking in hope that someone had a work around.
I guess I'll try to ship it back to Motorola(since it's within 14 days) and pretend I never even turned it on and ask for the PURE as a replacement.
Click to expand...
Click to collapse
Yeah, there is nothing you can do. Never flash anything with a locked bootloader, it's a recipe for disaster.
Sent from my XT1095 using Tapatalk

ibphantom said:
Does anybody know how to erase the gpt.bin so that I can flash stock?
I flashed from XT1095 gpt.bin and now I get the "Version Downgraded for primary_gpt" error.
Click to expand...
Click to collapse
Dont play with gpt.bin mate.. You will brick your phone, just wait a little bit more Marshmallow is comming soon, you will have your device working soon, dont try other variant gpt partitions you will brick your phone..
---------- Post added at 11:02 PM ---------- Previous post was at 10:51 PM ----------
Salik Iqbal said:
Dont play with gpt.bin mate.. You will brick your phone, just wait a little bit more Marshmallow is comming soon, you will have your device working soon, dont try other variant gpt partitions you will brick your phone..
Click to expand...
Click to collapse
Umm i found something stupid in your fastboot getvar :/ can you please try this:
Fastboot reboot-bootloader
Fastboot oem fb_mode_clear
Fastboot reboot

softbrick?

I have the same problem, i have XT1097 AT&T and i flashed other provider XT1097 Rom and i cant power on my device i only show fastboot mode and the error to downgrade bootloader , i do not know how can i return to stock , can anyone tell me what can i do ?

Flashed incorrect region firmware - Not able to lock the bootloader again - Bricked?

Hi guys,
I have Moto G5S Plus Indian variant phone - XT1804. I was trying to unlock the bootloader and root the phone. The phone already had stock firmware 8.1. During the process, I used the following firmware - SANDERS_OPS28.65-36_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.
The phone was able to unlock successfully, but during the boot, it is giving the following message:
Your device has been unlocked and can't be trusted again.
ID: bad key
Your device will boot in 5 seconds.
Although it says your device will boot in 5 seconds, nothing happens after 5 seconds. I am not to boot into the OS, but can into the fastboot mode by pressing volume down and power button. Below are my current getvar details:
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C2.12
(bootloader) product: sanders
(bootloader) board: sanders
(bootloader) secure: yes
(bootloader) hwrev: P4
(bootloader) radio: 2
(bootloader) storage-type: emmc
(bootloader) emmc: 64GB SAMSUNG RC14MB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=5F
(bootloader) cpu: MSM8953
(bootloader) cid: 0x0032
(bootloader) channelid: 0xc0
(bootloader) uid: DC7B4C3F00000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 534773760
(bootloader) reason: Volume down key pressed
(bootloader) meid:
(bootloader) date: 10-17-2017
(bootloader) sku: XT1804
(bootloader) carrier_sku:
(bootloader) battid: SB18C15119
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue May 12 16:16:19 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/sanders_n/sanders_n:8.1.0
(bootloader) ro.build.fingerprint[1]: /OPS28.65-36/9fea:user/release-key
(bootloader) ro.build.fingerprint[2]: s
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.28.31.40.sanders.ret
(bootloader) ro.build.version.full[1]: ail.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-08600-89xx.0
(bootloader) version-baseband: M8953_27.36.07.41R SANDERS_INDIADSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-gd0e0d1a (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Fri Aug 10 22:52:41 CDT 2018
(bootloader) sbl1.git: git=MBM-NG-VC2.12-0-g698fb2f
(bootloader) rpm.git: git=MBM-NG-VC2.11-0-g92e5e21-dirty
(bootloader) tz.git: git=MBM-NG-VC2.11-1-g9a0b157
(bootloader) devcfg.git: git=MBM-NG-VC2.11-1-g9a0b157
(bootloader) keymaster.git: git=MBM-NG-VC2.11-1-g9a0b157
(bootloader) cmnlib.git: git=MBM-NG-VC2.11-1-g9a0b157
(bootloader) cmnlib64.git: git=MBM-NG-VC2.11-1-g9a0b157
(bootloader) prov.git: git=MBM-NG-VC2.11-1-g9a0b157
(bootloader) aboot.git: git=MBM-NG-VC2.12-0-g07ff23c
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retin
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
I need help with three things.
1. Relock the bootloader and get back to Indian stock oreo 8.1 firmware. If you can provide the correct download link to restore stock firmware to Oreo 8.1.
2. Unlock the bootloader again with the correct stock ROM to get rid of the bad key message.
3. Possibly install twrp (not able to flash it right now) and PixelExperience ROM
I have tried the restore process with following commands on below firmwares, but does not help with locking the bootloader again.
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
I have tried with following steps to lock the bootloader with following commands, but still not working.
fastboot oem lock
fastboot oem lock
fastboot flash boot boot.img
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash boot boot.img
fastboot oem lock
I tried the above steps with the following firmware - SANDERS_RETAIL_8.1.0_OPSS28.65-36-6_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml, none of the steps are producing any errors except last. It is giving the following error in the last step.
(bootloader) Still require signed system.img and/or oem.img
Please help. :crying:

Did you give it 10 minutes?
---------- Post added at 05:43 AM ---------- Previous post was at 05:43 AM ----------
jacecrobinson said:
Did you give it 10 minutes?
Click to expand...
Click to collapse
It's quite normaly for it to say that but take up to five minutes on the first boot
---------- Post added at 05:45 AM ---------- Previous post was at 05:43 AM ----------
jacecrobinson said:
Did you give it 10 minutes?
Click to expand...
Click to collapse
It's quite normaly for it to say that but take up to five minutes on the first boot

Yesterday morning my phone stuck on dummy bootloader and showing oem locked ..
I can't flash any stock rom
And twrp coz oem is locked
When I want to flash stock rom via fastboot it shows
Unable to initialise partition table remote failure ..
I checked barcode .. there I see my imie no gone 000000..
Please help ..
I think my bootloader is bricked ... ..
If anyone developed blank flash zip for our xt1804 please help me...
Motocare says u have to change motherboard cost around 14 k
Please help me ...
Thank you in advance

jacecrobinson said:
Did you give it 10 minutes?
It's quite normaly for it to say that but take up to five minutes on the first boot
Click to expand...
Click to collapse
Thank you so much for the tip. I am now able to boot into the OS now, but then I am stuck with the following:
1. Unlocked bootloader - I would to relock it and unlock properly in order to install twrp bootloader
2. I am stuck with non-Indian firmware, hence will not receive OTA updates
3. I would like to install custom ROMs, which I can't since #1 - not able to install twrp.
Any workarounds or solutions are highly appreciated.

chiaotzu said:
Thank you so much for the tip. I am now able to boot into the OS now, but then I am stuck with the following:
1. Unlocked bootloader - I would to relock it and unlock properly in order to install twrp bootloader
2. I am stuck with non-Indian firmware, hence will not receive OTA updates
3. I would like to install custom ROMs, which I can't since #1 - not able to install twrp.
Any workarounds or solutions are highly appreciated.
Click to expand...
Click to collapse
You can't receive ota to my knowledge with a unlocked and modified boot..also if you relock your loader you have to be back to stock which defeats the port pose of a unlocked boot.
What version of twrp did you try and install? Did you use fast boot?and do you have USB dev enabled in settings before trying

Solved the issue, thanks.

chiaotzu said:
Solved the issue, thanks.
Click to expand...
Click to collapse
Please document your solution, in case other users have this problem
Sent from my Alcatel 5041C using XDA Labs

chiaotzu said:
Solved the issue, thanks.
Click to expand...
Click to collapse
have xt1802, I installed the firmware SANDERS_RETAIL_8.1.0_OPSS28.65-36-9_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
but when using adb commands it presents error writing 'partition' ...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
(bootloader) Cancelling 'gpt.default.xml'
FAILED (remote failure)
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 6
target reported max download size of 534773760 bytes
sending 'system' (262139 KB) ...
OKAY [5.623s]
is left without infinite loop, how to solve?

incorrect firmware Moto G5S Plus
chiaotzu said:
Solved the issue, thanks.
Click to expand...
Click to collapse
What you do it for solve??
I have the same poblem here

i softbricked moto g6 :(

so here i am, after 2 days of scrutinizing every corner of the internet, looking for solution. i had my moto g6 on pie but out of curiosity i wanted try out different roms and here is what happened:
- after ive successfully unlocked the oem lock, installed twrp and tried to install different roms just to run into error 255 and such i gave up and thought **** it lets go back to original rom, so i fired up fastboot and put back oreo that i downloaded from here, the splashscreen however was still bearing the 'device has been unlocked and cant be trusted' message, so i thought i would put back the oem lock and then formatted the device... ooops and thats when i started having these problems.
- since then i cant install any rom - stock or mod (i was however successful in flashing twrp back on the phone)
- fastboot says FLASHING_LOCKED and having tried maybe 6 different stock roms i noticed that i can flash these two lines without problems:
./fastboot flash partition gpt.bin
./fastboot flash bootloader bootloader.img
but anything after that is giving me (bootloader) flash permission denied FAILED (remote failure) in powershell
so to sum it up: i can boot into fastboot or twrp but i cant do much anything else
ive seemed to exhaust every remote advice out there and really dont know what to do anymore
any of you guys could point me in the right direction? or is the phone done and done?
here is the fastboot var list
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-ali_retail-e4c1135-190306
(bootloader) product: ali
(bootloader) board: ali
(bootloader) secure: yes
(bootloader) hwrev: PVT2
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SKHYNIX HBG4a2 RV=08 PV=A5 FV=00000000000000A5
(bootloader) ram: 3GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=5F
(bootloader) cpu: SDM450
(bootloader) cid: 0x0032
(bootloader) channelid: 0x00
(bootloader) uid: 1A46B50700000000000000000000
(bootloader) securestate: flashing_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 534773760
(bootloader) reason: UTAG "bootmode" configured as fastboot
(bootloader) meid:
(bootloader) date: 11-26-2018
(bootloader) sku: XT1925-4
(bootloader) carrier_sku: XT1925-4
(bootloader) battid: SB18C15119
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sun May 26 14: 4:32 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/ali_n/ali_n:8.0.0/OPS27.8
(bootloader) ro.build.fingerprint[1]: 2-19-4/a37fd:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.21.a37fd.ali.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M450_14.640.10.36R ALI_EMEA_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g5870245 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Fri Mar 9 11:12:11 CST 2018
(bootloader) sbl1.git: MBM-2.1-ali_retail-0d2031d-190306
(bootloader) rpm.git: MBM-2.1-ali_retail-576a4d4-190306
(bootloader) tz.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) devcfg.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) keymaster.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) cmnlib.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) cmnlib64.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) prov.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) aboot.git: MBM-2.1-ali_retail-e4c1135-190306
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retgb
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
thx
Peter

You have locked bootloader you cant flash anything ....unlock it, flash rom (optionaly flash stock rom and lock booloader)
mybea you can try "fastboot flashing unlock"

najjannajS650 said:
You have locked bootloader you cant flash anything ....unlock it, flash rom (optionaly flash stock rom and lock booloader)
mybea you can try "fastboot flashing unlock"
Click to expand...
Click to collapse
thanks, i think ive already tried that already before,
here is a recap of what happens when i type in fastboot flashing unlock
- (bootloader) WARNING: This command erases all user data. (bootloader) Please re-run this command to continue.
- (bootloader) Check 'Allow OEM Unlock' in Android Settings > Developer (bootloader) Options.
i dont have any rom installed so i cant get into developers options and allow OEM unlock
edited: and if i try ./fastboot oem unlock
i get
... (bootloader) invalid boot state
:crying:

nobody has solution to this? really????

delosanto said:
nobody has solution to this? really????
Click to expand...
Click to collapse
You don't need to unlock the bootloader to flash the stock firmware. The reason gpt.bin and the bootloader won't flash is because you're attempting to downgrade them. Flash everything in your firmware in order and if something fails to flash, then just skip it and go to the next item in line. It should still work.

Spaceminer said:
You don't need to unlock the bootloader to flash the stock firmware. The reason gpt.bin and the bootloader won't flash is because you're attempting to downgrade them. Flash everything in your firmware in order and if something fails to flash, then just skip it and go to the next item in line. It should still work.
Click to expand...
Click to collapse
thanks man but those two files are the only files that seem to flash.. the rest is giving flashing denied error
after digging around xda even more ive realized im in the same situation as the guy: https://forum.xda-developers.com/moto-x4/help/fastboot-flashinglocked-modified-t3872215
ive managed to brick it real good this time, quoting a nice chap who tried to help him: "You DID lock the keys... not so much in a car with bulletproof windows... but in a nuclear-resistant TANK"
im really sad at this point, i didnt even have the phone for a week and even being it a budget phone i really really liked it..
RIP moto g6 you were my first... bricked... phone :crying:

delosanto said:
thanks man but those two files are the only files that seem to flash.. the rest is giving flashing denied error
after digging around xda even more ive realized im in the same situation as the guy: https://forum.xda-developers.com/moto-x4/help/fastboot-flashinglocked-modified-t3872215
ive managed to brick it real good this time, quoting a nice chap who tried to help him: "You DID lock the keys... not so much in a car with bulletproof windows... but in a nuclear-resistant TANK"
im really sad at this point, i didnt even have the phone for a week and even being it a budget phone i really really liked it..
RIP moto g6 you were my first... bricked... phone :crying:
Click to expand...
Click to collapse
I don't think you're bricked just yet. From fastboot try the following commands;
fastboot oem fb_mode_set
fastboot format -w
fastboot erase userdata
fastboot erase cache
fastboot erase DRR
Then try flashing your firmware again. Also, something would help is running the command;
fastboot getvar all
And posting what that says. DO NOT include your MEID number. I don't need it and it should never be given out.

Spaceminer said:
I don't think you're bricked just yet. From fastboot try the following commands;
fastboot oem fb_mode_set
fastboot format -w
fastboot erase userdata
fastboot erase cache
fastboot erase DRR
Then try flashing your firmware again. Also, something would help is running the command;
fastboot getvar all
And posting what that says. DO NOT include your MEID number. I don't need it and it should never be given out.
Click to expand...
Click to collapse
ok, here goes nothing
fastboot oem fb_mode_set returns OKAY [ 0.002s] finished. total time: 0.003s
fastboot format -w returns fastboot: usage: expected argument
fastboot erase userdata returns (bootloader) Permission denied FAILED (remote failure) finished. total time: 0.004s
fastboot erase cache returns (bootloader) Permission denied FAILED (remote failure)
fastboot erase DRR returns (bootloader) Permission denied FAILED (remote failure)
getvarall info:
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-ali_retail-e4c1135-190306
(bootloader) product: ali
(bootloader) board: ali
(bootloader) secure: yes
(bootloader) hwrev: PVT2
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SKHYNIX HBG4a2 RV=08 PV=A5 FV=00000000000000A5
(bootloader) ram: 3GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=5F
(bootloader) cpu: SDM450
(bootloader) cid: 0x0032
(bootloader) channelid: 0x00
(bootloader) uid: 1A46B50700000000000000000000
(bootloader) securestate: flashing_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 534773760
(bootloader) reason: Fall-through from charger boot mode
(bootloader) date: 11-26-2018
(bootloader) sku: XT1925-4
(bootloader) carrier_sku: XT1925-4
(bootloader) battid: SB18C15119
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Jan 22 19:25:37 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/ali_n/ali_n:8.0.0/OPS27.8
(bootloader) ro.build.fingerprint[1]: 2-19-4/a37fd:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.21.a37fd.ali.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M450_14.640.10.36R ALI_EMEA_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g5870245 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Fri Mar 9 11:12:11 CST 2018
(bootloader) sbl1.git: MBM-2.1-ali_retail-0d2031d-190306
(bootloader) rpm.git: MBM-2.1-ali_retail-576a4d4-190306
(bootloader) tz.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) devcfg.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) keymaster.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) cmnlib.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) cmnlib64.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) prov.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) aboot.git: MBM-2.1-ali_retail-e4c1135-190306
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retgb
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above

delosanto said:
ok, here goes nothing
fastboot oem fb_mode_set returns OKAY [ 0.002s] finished. total time: 0.003s
fastboot format -w returns fastboot: usage: expected argument
fastboot erase userdata returns (bootloader) Permission denied FAILED (remote failure) finished. total time: 0.004s
fastboot erase cache returns (bootloader) Permission denied FAILED (remote failure)
fastboot erase DRR returns (bootloader) Permission denied FAILED (remote failure)
getvarall info:
(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-ali_retail-e4c1135-190306
(bootloader) product: ali
(bootloader) board: ali
(bootloader) secure: yes
(bootloader) hwrev: PVT2
(bootloader) radio: 4
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SKHYNIX HBG4a2 RV=08 PV=A5 FV=00000000000000A5
(bootloader) ram: 3GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=5F
(bootloader) cpu: SDM450
(bootloader) cid: 0x0032
(bootloader) channelid: 0x00
(bootloader) uid: 1A46B50700000000000000000000
(bootloader) securestate: flashing_locked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 534773760
(bootloader) reason: Fall-through from charger boot mode
(bootloader) date: 11-26-2018
(bootloader) sku: XT1925-4
(bootloader) carrier_sku: XT1925-4
(bootloader) battid: SB18C15119
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Tue Jan 22 19:25:37 UTC 2019"
(bootloader) ro.build.fingerprint[0]: motorola/ali_n/ali_n:8.0.0/OPS27.8
(bootloader) ro.build.fingerprint[1]: 2-19-4/a37fd:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.27.21.a37fd.ali.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.6.6.r1-04400-89xx.0
(bootloader) version-baseband: M450_14.640.10.36R ALI_EMEA_CUST
(bootloader) kernel.version[0]: Linux version 3.18.71-perf-g5870245 (hud
(bootloader) kernel.version[1]: son[email protected]) (gcc version 4.9.x 2015
(bootloader) kernel.version[2]: 0123 (prerelease) (GCC) ) #1 SMP PREEMPT
(bootloader) kernel.version[3]: Fri Mar 9 11:12:11 CST 2018
(bootloader) sbl1.git: MBM-2.1-ali_retail-0d2031d-190306
(bootloader) rpm.git: MBM-2.1-ali_retail-576a4d4-190306
(bootloader) tz.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) devcfg.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) keymaster.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) cmnlib.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) cmnlib64.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) prov.git: MBM-2.1-ali_retail-4636043-190306
(bootloader) aboot.git: MBM-2.1-ali_retail-e4c1135-190306
(bootloader) frp-state: no protection (0)
(bootloader) ro.carrier: retgb
(bootloader) current-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
all: listed above
Click to expand...
Click to collapse
What country are you in? You have a software mismatch going on. It says your carrier is RETGB which is Great Britain, but your Blur version is saying Retail US.

Spaceminer said:
What country are you in? You have a software mismatch going on. It says your carrier is RETGB which is Great Britain, but your Blur version is saying Retail US.
Click to expand...
Click to collapse
im in the uk, please dont say there is still hope

delosanto said:
im in the uk, please dont say there is still hope
Click to expand...
Click to collapse
Yes there is! I think you need this firmware. https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
If that doesn't work, try this one.
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Special note: Do not use any scripts, batch files, or rsdlite to flash it. Use adb/fastboot and enter everything manually. Read the flash file carefully, and be sure to use the command fastboot oem fb_mode_set before starting, and when you finish flashing, enter the commands, fastboot oem fb_mode_clear then fastboot reboot after. Wait and it should start to encrypt then reboot and finish encrypting.

Spaceminer said:
Yes there is! I think you need this firmware. https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
If that doesn't work, try this one.
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Special note: Do not use any scripts, batch files, or rsdlite to flash it. Use adb/fastboot and enter everything manually. Read the flash file carefully, and be sure to use the command fastboot oem fb_mode_set before starting, and when you finish flashing, enter the commands, fastboot oem fb_mode_clear then fastboot reboot after. Wait and it should start to encrypt then reboot and finish encrypting.
Click to expand...
Click to collapse
i did exactly as you said, getting the same results as before
the first two files gpt and bootloader seem to flash fine but the rest is giving me the same error (bootloader) flash permission denied FAILED (remote failure)
PS C:\Users\okratio\Desktop\platform-tools> ./fastboot oem fb_mode_set
...
OKAY [ 0.003s]
finished. total time: 0.003s
PS C:\Users\okratio\Desktop\platform-tools> ./fastboot flash partition gpt.bin
target reported max download size of 534773760 bytes
sending 'partition' (45 KB)...
OKAY [ 0.000s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Committing 'gpt.default.xml'
(bootloader) - flashing 'gpt_main0.bin' to 'partition:0'
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.078s]
finished. total time: 0.078s
PS C:\Users\okratio\Desktop\platform-tools> ./fastboot flash bootloader bootloader.img
target reported max download size of 534773760 bytes
sending 'bootloader' (7419 KB)...
OKAY [ 0.212s]
writing 'bootloader'...
(bootloader) Validating 'bootloader.default.xml'
(bootloader) Committing 'bootloader.default.xml'
(bootloader) - flashing 'emmc_appsboot.mbn' to 'aboot'
(bootloader) - flashing 'rpm.mbn' to 'rpm'
(bootloader) - flashing 'tz.mbn' to 'tz'
(bootloader) - flashing 'devcfg.mbn' to 'devcfg'
(bootloader) - flashing 'cmnlib.mbn' to 'cmnlib'
(bootloader) - flashing 'cmnlib64.mbn' to 'cmnlib64'
(bootloader) - flashing 'keymaster.mbn' to 'keymaster'
(bootloader) - flashing 'prov.mbn' to 'prov'
(bootloader) - flashing 'sbl1.mbn' to 'sbl1'
OKAY [ 0.417s]
finished. total time: 0.630s
PS C:\Users\okratio\Desktop\platform-tools> ./fastboot flash modem NON-HLOS.bin
target reported max download size of 534773760 bytes
sending 'modem' (62664 KB)...
OKAY [ 1.660s]
writing 'modem'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 1.665s
PS C:\Users\okratio\Desktop\platform-tools> ./fastboot flash fsg fsg.mbn
target reported max download size of 534773760 bytes
sending 'fsg' (7972 KB)...
OKAY [ 0.219s]
writing 'fsg'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 0.219s
i tried to flashed the files exactly in the order they appear in .info file
./fastboot oem fb_mode_set
./fastboot flash partition gpt.bin
./fastboot flash bootloader bootloader.img
./fastboot flash modem NON-HLOS.bin
./fastboot flash fsg fsg.mbn
./fastboot flash dsp adspso.bin
./fastboot flash logo logo.bin
./fastboot flash boot boot.img
./fastboot flash recovery recovery.img
./fastboot flash system system.img_sparsechunk.0
./fastboot flash system system.img_sparsechunk.1
./fastboot flash system system.img_sparsechunk.2
./fastboot flash system system.img_sparsechunk.3
./fastboot flash system system.img_sparsechunk.4
./fastboot flash system system.img_sparsechunk.5
./fastboot flash system system.img_sparsechunk.6
./fastboot flash system system.img_sparsechunk.7
./fastboot flash system system.img_sparsechunk.8
./fastboot flash system system.img_sparsechunk.9
./fastboot flash vendor vendor.img_sparsechunk.0
./fastboot flash vendor vendor.img_sparsechunk.1
./fastboot flash oem oem.img
./fastboot erase cache
./fastboot erase userdata
./fastboot erase ddr
./fastboot oem fb_mode_clear
./fastboot reboot

delosanto said:
i did exactly as you said, getting the same results as before
the first two files gpt and bootloader seem to flash fine but the rest is giving me the same error (bootloader) flash permission denied FAILED (remote failure)
PS C:\Users\okratio\Desktop\platform-tools> ./fastboot oem fb_mode_set
...
OKAY [ 0.003s]
finished. total time: 0.003s
PS C:\Users\okratio\Desktop\platform-tools> ./fastboot flash partition gpt.bin
target reported max download size of 534773760 bytes
sending 'partition' (45 KB)...
OKAY [ 0.000s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Committing 'gpt.default.xml'
(bootloader) - flashing 'gpt_main0.bin' to 'partition:0'
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.078s]
finished. total time: 0.078s
PS C:\Users\okratio\Desktop\platform-tools> ./fastboot flash bootloader bootloader.img
target reported max download size of 534773760 bytes
sending 'bootloader' (7419 KB)...
OKAY [ 0.212s]
writing 'bootloader'...
(bootloader) Validating 'bootloader.default.xml'
(bootloader) Committing 'bootloader.default.xml'
(bootloader) - flashing 'emmc_appsboot.mbn' to 'aboot'
(bootloader) - flashing 'rpm.mbn' to 'rpm'
(bootloader) - flashing 'tz.mbn' to 'tz'
(bootloader) - flashing 'devcfg.mbn' to 'devcfg'
(bootloader) - flashing 'cmnlib.mbn' to 'cmnlib'
(bootloader) - flashing 'cmnlib64.mbn' to 'cmnlib64'
(bootloader) - flashing 'keymaster.mbn' to 'keymaster'
(bootloader) - flashing 'prov.mbn' to 'prov'
(bootloader) - flashing 'sbl1.mbn' to 'sbl1'
OKAY [ 0.417s]
finished. total time: 0.630s
PS C:\Users\okratio\Desktop\platform-tools> ./fastboot flash modem NON-HLOS.bin
target reported max download size of 534773760 bytes
sending 'modem' (62664 KB)...
OKAY [ 1.660s]
writing 'modem'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 1.665s
PS C:\Users\okratio\Desktop\platform-tools> ./fastboot flash fsg fsg.mbn
target reported max download size of 534773760 bytes
sending 'fsg' (7972 KB)...
OKAY [ 0.219s]
writing 'fsg'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 0.219s
Click to expand...
Click to collapse
It looks like you have the correct firmware. If you didn't then the bootloader shouldn't be able to flash. You aren't being blocked by frp either, so that's not the problem. I'll do some research and see if I can find a way to fix this. It should allow you to flash stock firmware since it's signed by Motorola. This is a tough one.
If you're using Windows and have not tried this already, try opening the command prompt with administrator privileges. If you happen to be using Windows 10, make sure that you're using the older cmd and not powershell. If you have not tried using a different usb port, this might be worth a shot. I'd try ports that are directly connected to the motherboard. Try USB 2.0 and 3.0 if you have both. Also be sure to use the original USB cord that it came with if you have it. I'll see what I can dig up in the meantime.
---------- Post added at 07:09 PM ---------- Previous post was at 06:57 PM ----------
@delosanto
Are you able to boot or flash twrp?

Spaceminer said:
It looks like you have the correct firmware. If you didn't then the bootloader shouldn't be able to flash. You aren't being blocked by frp either, so that's not the problem. I'll do some research and see if I can find a way to fix this. It should allow you to flash stock firmware since it's signed by Motorola. This is a tough one.
If you're using Windows and have not tried this already, try opening the command prompt with administrator privileges. If you happen to be using Windows 10, make sure that you're using the older cmd and not powershell. If you have not tried using a different usb port, this might be worth a shot. I'd try ports that are directly connected to the motherboard. Try USB 2.0 and 3.0 if you have both. Also be sure to use the original USB cord that it came with if you have it. I'll see what I can dig up in the meantime.
Click to expand...
Click to collapse
thank you! i think i must have read and tried everything there is out there trying to bring the poor little fella back to life.. ive tried different ports, methods, ROMs, different cables, tomorrow im gonna try what youre suggesting - the older cmd but i doubt it will make any difference, since i was able to flash and re-flash this phone just fine before i somehow managed to **** up the oem lock with no possibility to unlock it since there is no OS.
yes, im able to totally erase twrp (pic of android with red triangle and NO COMMAND) and then bring it back by booting twrp and consequently flashing twrp so it's there back under recovery mode

Spaceminer said:
Yes there is! I think you need this firmware. https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
If that doesn't work, try this one.
https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Special note: Do not use any scripts, batch files, or rsdlite to flash it. Use adb/fastboot and enter everything manually. Read the flash file carefully, and be sure to use the command fastboot oem fb_mode_set before starting, and when you finish flashing, enter the commands, fastboot oem fb_mode_clear then fastboot reboot after. Wait and it should start to encrypt then reboot and finish encrypting.
Click to expand...
Click to collapse
I haven't seen the encrypting screen on Pie... I've only seen it on Oreo.

Ragarianok said:
I haven't seen the encrypting screen on Pie... I've only seen it on Oreo.
Click to expand...
Click to collapse
the last OS that was successfully flashed was Oreo

delosanto said:
the last OS that was successfully flashed was Oreo
Click to expand...
Click to collapse
I'm not sure if I was reading that correctly, but are you able to boot twrp? If so, try formatting /data and running fix permissions. If you can only boot the stock recovery (red triangle), try factory resetting. You can pull up the menu in stock recovery by pressing Power+Volume Up at the "no command" screen. If you can reset the phone through either method, then try flashing the firmware again. Maybe a stupid question, but have you tried flashing the last Oreo RETGB xt1925-4 firmware already? (There's a few different RETGB firmwares.)

Spaceminer said:
I'm not sure if I was reading that correctly, but are you able to boot twrp? If so, try formatting /data and running fix permissions. If you can only boot the stock recovery (red triangle), try factory resetting. You can pull up the menu in stock recovery by pressing Power+Volume Up at the "no command" screen. If you can reset the phone through either method, then try flashing the firmware again. Maybe a stupid question, but have you tried flashing the last Oreo RETGB xt1925-4 firmware already? (There's a few different RETGB firmwares.)
Click to expand...
Click to collapse
twrp runs fine, what i cant get rid of is the flashing_locked message in fastboot..
this i think prevents flashing ANYTHING onto the phone except two files:
./fastboot flash partition gpt.bin
./fastboot flash bootloader bootloader.img
flashing any other file returns permission denied
and ive tried at least 6 different roms

delosanto said:
twrp runs fine, what i cant get rid of is the flashing_locked message in fastboot..
this i think prevents flashing ANYTHING onto the phone except two files:
./fastboot flash partition gpt.bin
./fastboot flash bootloader bootloader.img
flashing any other file returns permission denied
and ive tried at least 6 different roms
Click to expand...
Click to collapse
Try flashing this boot.img in fastboot. If it fails, try using TWRP.

Spaceminer said:
Try flashing this boot.img in fastboot. If it fails, try using TWRP.
Click to expand...
Click to collapse
but when i try to flash the stock rom, again i get past the first two files gpt.bin and bootloader.bit but the rest is giving me the same error
(bootloader) flash permission denied
FAILED (remote failure)
but then it crashes back to fastboot
and i even did a clean windows installation today

[Recovery] Moto g7 Plus with blocked bootloader.

Recently I went to update the rom of my moto G7 +, but during the update process the bootloader blocked ... I tried to perform the unlock again however the unlock option is disabled, and to make it worse it does not start, it is only on the recovery mode screen .
I already downloaded a more current firmware, but the bootloader does not allow installation.

Best to try the LMSA tool to reflash back to stock..
Download https://support.lenovo.com/ca/en/downloads/ds101291
Guide https://support.lenovo.com/us/en/solutions/HT102605

Thanks for the answer.
Thanks for the answer.
When I try to connect the LMSA to the phone it gives an error.
"failed to match the connected device reconnect device then try again"
I tried several times, connecting the device after selecting the model, and vice versa, however the error persists.

wfsmnt said:
Recently I went to update the rom of my moto G7 +, but during the update process the bootloader blocked ... I tried to perform the unlock again however the unlock option is disabled, and to make it worse it does not start, it is only on the recovery mode screen .
I already downloaded a more current firmware, but the bootloader does not allow installation.
Click to expand...
Click to collapse
Bootloader screen => get your model (XT19XX)=> download the current firmware

WoKoschekk said:
Bootloader screen => get your model (XT19XX)=> download the current firmware
Click to expand...
Click to collapse
XT1965-2

Thanks for the answer.
WoKoschekk said:
Bootloader screen => get your model (XT19XX)=> download the current firmware
Click to expand...
Click to collapse
Even downloading the latest firmware version the bootloader gives access denied

wfsmnt said:
Even downloading the latest firmware version the bootloader gives access denied
Click to expand...
Click to collapse
Could you post the output of "fastboot getvar all" here? Furthermore it would be helpful to know the build no of your downloaded firmware.

Thanks for the answer.
WoKoschekk said:
Could you post the output of "fastboot getvar all" here? Furthermore it would be helpful to know the build no of your downloaded firmware.
Click to expand...
Click to collapse
============================================================
GETVAR ALL
D:\Users\Wilian\Downloads\>fastboot getvar all
(bootloader) kernel: uefi
(bootloader) version-bootloader: MBM-3.0-lake_retail-38523c9-191220
(bootloader) product: lake
(bootloader) board: lake
(bootloader) secure: yes
(bootloader) hwrev: PVT
(bootloader) radio: LATAM
(bootloader) storage-type: eMMC
(bootloader) emmc: 64GB SAMSUNG DH6DAB RV=08 PV=02 FV=0000000000000002
(bootloader) ufs: N/A
(bootloader) ram: 4GB SAMSUNG LP4x DIE=16Gb M5=01 M6=06 M7=10 M8=12
(bootloader) cpu: SDM636 1.0 (1)
(bootloader) serialno: ###############
(bootloader) cid: 0x0032
(bootloader) channelid: 0x19
(bootloader) uid: CEE77785
(bootloader) securestate: flashing_locked
(bootloader) verity-state: disabled (0)
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: #####################
(bootloader) meid:
(bootloader) date: 01-30-2019
(bootloader) sku: XT1965-2
(bootloader) carrier_sku: XT1965-2
(bootloader) battid: ###################
(bootloader) battery-voltage: 4281
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) ro.build.fingerprint[0]: motorola/lake_n/lake_n:10/QPW30.61
(bootloader) ro.build.fingerprint[1]: -21/cb81e:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full: <not found>
(bootloader) ro.build.version.qcom: LA.UM.8.2.r1-04300-sdm660.0
(bootloader) version-baseband: <not found>
(bootloader) kernel.version[0]: Linux version 4.4.192-perf+ ([email protected]
(bootloader) kernel.version[1]: oid-build) (gcc version 4.9.x 20150123 (
(bootloader) kernel.version[2]: prerelease) (GCC) ) #1 SMP PREEMPT Fri A
(bootloader) kernel.version[3]: pr 10 06:08:41 CDT 2020
(bootloader) git:abl: MBM-3.0-lake_retail-38523c9-191220
(bootloader) git:xbl: MBM-3.0-lake_retail-923e768-191220
(bootloader) gitmic: MBM-3.0-lake_retail-923e768-191220
(bootloader) git:rpm: MBM-3.0-lake_retail-50d7845-dirty-191220
(bootloader) git:tz: MBM-3.0-lake_retail-79dd9bc-dirty-191220
(bootloader) git:hyp: MBM-3.0-lake_retail-79dd9bc-dirty-191220
(bootloader) git:devcfg: MBM-3.0-lake_retail-79dd9bc-dirty-191220
(bootloader) git:cmnlib: MBM-3.0-lake_retail-79dd9bc-dirty-191220
(bootloader) git:cmnlib64: MBM-3.0-lake_retail-79dd9bc-dirty-191220
(bootloader) git:keymaster: MBM-3.0-lake_retail-79dd9bc-dirty-191220
(bootloader) gitrov: MBM-3.0-lake_retail-79dd9bc-dirty-191220
(bootloader) git:storsec: MBM-3.0-lake_retail-79dd9bc-dirty-191220
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: retbr
(bootloader) current-slot: a
(bootloader) running-bl-slot: _a/_a
(bootloader) running-boot-lun: 0
(bootloader) slot-count: 2
(bootloader) slot-successful:_a: no
(bootloader) slot-successful:_b: no
(bootloader) slot-unbootable:_a: no
(bootloader) slot-unbootable:_b: no
(bootloader) slot-retry-count:_a: 5
(bootloader) slot-retry-count:_b: 0
all: listed above
finished. total time: 0.109s
====================================================================
Follows the build of the downloaded rom.
BUILD REQUEST INFO:
SW Version: lake-user 10 QPWS30.61-21-3 0f1d7 release-keysM636_13.45.02.60R
MBM Version: MBM-3.0-lake_retail-923e768-200214
Modem Version: M636_13.45.02.60R
FSG Version: FSG-660-10.98
Build Fingerprint: motorola/lake/lake:10/QPWS30.61-21-3/0f1d7:user/release-keys
=================================================================
I tried to install using the latest rom released too.
BUILD REQUEST INFO:
SW Version: lake-user 10 QPWS30.61-21-9 664a release-keysM636_13.45.02.60R
Modem Version: M636_13.45.02.60R
FSG Version: FSG-660-10.98
MBM Version: MBM-3.0-lake_retail-efaf0cccb-200410
Build Fingerprint: motorola/lake/lake:10/QPWS30.61-21-9/664a:user/release-keys

wfsmnt said:
(bootloader) ro.build.fingerprint[0]: motorola/lake_n/lake_n:10/QPW30.61
(bootloader) ro.build.fingerprint[1]: -21/cb81e:user/release-keys
Click to expand...
Click to collapse
As you can see in your output the current installed version is motorola/lake_n/lake_n:10/QPW30.61-21/cb81e:user/release-keys.
You should try to flash exactly the same build matching to your current firmware. (download here)
Maybe the error occured due to trying to "update" your firmware (current: 30.61-21 => new: 30.61-21-3/-9) while the bootloader is locked.
Hope this solves your problem!
---------- Post added at 01:10 AM ---------- Previous post was at 01:02 AM ----------
And don't forget to use the flashing commands of the inside flashfile.xml!! Sometimes the number of the system.img_sparsechunks is different.
DO NOT USE ANY FLASH COMMANDS FROM OTHER USERS!!

Thanks for the answer.
WoKoschekk said:
As you can see in your output the current installed version is motorola/lake_n/lake_n:10/QPW30.61-21/cb81e:user/release-keys.
You should try to flash exactly the same build matching to your current firmware. (download here)
Maybe the error occured due to trying to "update" your firmware (current: 30.61-21 => new: 30.61-21-3/-9) while the bootloader is locked.
Hope this solves your problem!
---------- Post added at 01:10 AM ---------- Previous post was at 01:02 AM ----------
And don't forget to use the flashing commands of the inside flashfile.xml!! Sometimes the number of the system.img_sparsechunks is different.
DO NOT USE ANY FLASH COMMANDS FROM OTHER USERS!!
Click to expand...
Click to collapse
Even if you apply the rom you sent me permission is denied.
===============================================================
Microsoft Windows [versão 10.0.18363.900]
(c) 2019 Microsoft Corporation. Todos os direitos reservados.
C:\Users\Wilian\Downloads\XT1965-2_LAKE_RETBR_10_QPW30.61-21_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml>fastboot getvar max-sparse-size
max-sparse-size: 268435456
finished. total time: 0.006s
C:\Users\Wilian\Downloads\XT1965-2_LAKE_RETBR_10_QPW30.61-21_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml>fastboot oem fb_mode_set
...
OKAY [ 0.010s]
finished. total time: 0.013s
C:\Users\Wilian\Downloads\XT1965-2_LAKE_RETBR_10_QPW30.61-21_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml>fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (37 KB)...
OKAY [ 0.008s]
writing 'partition'...
(bootloader) Validating 'gpt.default.xml'
(bootloader) Committing 'gpt.default.xml'
(bootloader) - flashing 'gpt_main0.bin' to 'partition:0'
OKAY [ 0.145s]
finished. total time: 0.159s
C:\Users\Wilian\Downloads\XT1965-2_LAKE_RETBR_10_QPW30.61-21_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml>fastboot flash bootloader bootloader.img
target reported max download size of 536870912 bytes
sending 'bootloader' (9520 KB)...
OKAY [ 0.291s]
writing 'bootloader'...
(bootloader) Validating 'bootloader.default.xml'
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) flash permission denied
(bootloader) Cancelling 'bootloader.default.xml'
FAILED (remote failure)
finished. total time: 0.361s
C:\Users\Wilian\Downloads\XT1965-2_LAKE_RETBR_10_QPW30.61-21_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml>fastboot flash modem NON-HLOS.bin
target reported max download size of 536870912 bytes
sending 'modem' (76484 KB)...
OKAY [ 2.164s]
writing 'modem'...
(bootloader) flash permission denied
FAILED (remote failure)
finished. total time: 2.183s

wfsmnt said:
Even if you apply the rom you sent me permission is denied.
Click to expand...
Click to collapse
I'm running out of ideas... The bootloader.img and its signature is matching completely with your output of getvar all.
On some older devices of the Moto G series the mfastboot tools were helpful in your case. The binaries may be old but this is the latest version of the tool...
The next step would be a blank flash.

mfastboot tools

It's like fastboot, but especially for Motorola devices by Motorola. The commands are "mfastboot" instead of "fastboot". That's all.

WoKoschekk said:
It's like fastboot, but especially for Motorola devices by Motorola. The commands are "mfastboot" instead of "fastboot". That's all.
Click to expand...
Click to collapse
Unfortunately the same result.

WoKoschekk said:
It's like fastboot, but especially for Motorola devices by Motorola. The commands are "mfastboot" instead of "fastboot". That's all.
Click to expand...
Click to collapse
How can we perform the blank-flash

wfsmnt said:
How can we perform the blank-flash
Click to expand...
Click to collapse
Sorry, I can't help you with that.

Are you using Motorola's original cable, or another one? I just had problems flashing with 'custom' cable. Just connect directly by USB-C (I'm hoping that's possible for you to try).

sado1 said:
Are you using Motorola's original cable, or another one? I just had problems flashing with 'custom' cable. Just connect directly by USB-C (I'm hoping that's possible for you to try).
Click to expand...
Click to collapse
He gets "permission denied" and that's not a connection error.
Besides the first command runs without an error.