Database Develop

[Q] HELLLP! nonworking screen turned into more serious problem while install 4.4.2!!!

i was rooted under 4.3 ML2, then i followed the second way(http://forum.xda-developers.com/showthread.php?t=2722073) to flash the pwnedkitkat.zip in safetrap, but my screen wasnt working so i searched forum and saw that it says reflash PDA from ML2, from http://forum.xda-developers.com/showthread.php?t=2721247 i did but it couldnt load up, so i wanted to reflash the BL for ML2, but instead i used the wrong one, i used the one called boot.tar.md5, which supposed to be PDA instead of BL, now i cant even boot up my phone.
ive done some research, and here are seems like where the problem from:
1: i cant recover it with safestrap installed.
2: the firmware on my phone is newer than the stock rom(ML2) im trying to flash.
im totally freaked right now, can somebody help me please, really really apreciate your help. (is there anyway i can get the ODIN files for 4.4.2? thanks thanks !!! compare with root, i need my phone first !!)
following is my odin log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen it says
PRODUCT NAME : SGH-I537
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
knox kernel lock: 0*0
knox warranty void: 0*1
csb-config-lsb:0*30
write protection: enable
ommc burst mode :enabled
start 224.1440
sw rev check fail: fused:4 binary:3

tqsdyy said:
i was rooted under 4.3 ML2, then i followed the second way(http://forum.xda-developers.com/showthread.php?t=2722073) to flash the pwnedkitkat.zip in safetrap, but my screen wasnt working so i searched forum and saw that it says reflash PDA from ML2, from http://forum.xda-developers.com/showthread.php?t=2721247 i did but it couldnt load up, so i wanted to reflash the BL for ML2, but instead i used the wrong one, i used the one called boot.tar.md5, which supposed to be PDA instead of BL, now i cant even boot up my phone.
ive done some research, and here are seems like where the problem from:
1: i cant recover it with safestrap installed.
2: the firmware on my phone is newer than the stock rom(ML2) im trying to flash.
im totally freaked right now, can somebody help me please, really really apreciate your help. (is there anyway i can get the ODIN files for 4.4.2? thanks thanks !!! compare with root, i need my phone first !!)
following is my odin log:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my phone screen it says
PRODUCT NAME : SGH-I537
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
knox kernel lock: 0*0
knox warranty void: 0*1
csb-config-lsb:0*30
write protection: enable
ommc burst mode :enabled
start 224.1440
sw rev check fail: fused:4 binary:3
Click to expand...
Click to collapse
I think your screen is deffective..? no other user has reported this issue

Sunderwear said:
I think your screen is deffective..? no other user has reported this issue
Click to expand...
Click to collapse
after many trials, i used boot.tar.md5 for BL and succesfully got back rooted on 4.3, however, i cant make phone calles, text messages are fine though, and hte screen, of course, works great . i rooted 4.3 then i followed your step for rooted 4.3 to 4.4.2 and i succefully installed it and the touch screen is not reponding, not at all, but only with one touch to unlock it, and after unlock, i cant do nothing. and most of the time i cant even unlock it. i am fine with rooted 4.3 or unrooted whatever, i jsut need a phone badly... please help me. when i try to make a phone call, after i pressed "call" nothing happens, the phone froze, yet people im dialing can receive the phone call, just that they cnat hear me.
(im not sure if this is a stupid question , but will there be an ODIN restore for 4.4.2? if yes, how long will it be released? i think the fact i cant make phone calls actually contributed by the wrong bootloader, (or i might be wrong). thanks a lot man, i know you're great! really appreaciate your work on rooting 4.3)

[OFFICIAL] Firmware selection for SM-T700/SM-T800 Variants

Hello my friends! I decided myself to creat a thread with official stock firmwares of our Galaxy Tab S. I don't touch it, all is stock! I'm grabbing this files from www.sammobile.com and than upload it on faster hoster
If it is wished by some users, i can extract the md5.tar files and upload different files (boot.img, system.img etc.)
What's in it:​I will add the latest firmwares provided by Samsung, this means, always latest built date, highest changelog, latest modem, bootloader etc. I will creat different mirrors, I will add www.mega.co.nz I think
All firmwares are without branding! And it don't plays a role, if the firmwares are from Russia, New Zealand or Germany. The only difference between them is the preinstalled language and keyboard language. And that's all. You can easily change it
This will not tripp your Knox warranty!! It's an official update! Knox will stay 0.
Supported devices:​
SM-T700
SM-T705
SM-T800
SM-T805
Instructions:​
Flash it at your own risk, I'm not responsible for any damaged device!
1. Download the needed firmware from below and extract the zip to get the odin files
2. Download latest odin from here!
3. Open Odin, click on AP and add AP file. Same for BL, CP and CSC! Add all 4 files to odin (except wifi versions don't have any modem)
4. Make sure you installed all samsung drivers
5. Shut down your Tab S.
6. Open download mode by holding volume down, home button and power button.
7. Connect it to your PC.
8. LEAVE EVERY THING AS IT IS IN ODIN, OTHERWISE THERE WILL BE A CATASTROPHE (If you select something wrong.)
9. When your tablet is connected, there will shine a bluenbox in odin.
10. Hit start and wait
11. It will reboot and you will get the latest firmware from samsung.
Download Center:​SM-T700:
Latest MM rom for SM-T700
Model SM-T700
Model name GALAXY TabS
Country Chile
Version Android 6.0.1
Changelist 9541789
Build date Tue, 18 Oct 2016 12:17:02 +0000
Security Patch Level 2016-10-01
Product code CHO
PDA T700XXU1CPJ3
CSC T700UVS1CPJ3
SM-T705:
Latest MM rom for SM-T705
Model SM-T705
Model name GALAXY TabS
Country Bulgaria
Version Android 6.0.1
Changelist 8816210
Build date Thu, 13 Oct 2016 03:20:58 +0000
Security Patch Level 2016-10-01
Product code BGL
PDA T705XXU1CPJ4
CSC T705OXX1CPJ1
SM-T800:
Latest MM rom for SM-T800
Model SM-T800
Model name GALAXY Tab S
Country Italy
Version Android 6.0.1
Changelist 8965996
Build date Mon, 31 Oct 2016 10:08:19 +0000
Security Patch Level 2016-11-01
Product code ITV
PDA T800XXU1CPK1
CSC T800ITV1CPI1
SM-T805:
Latest MM rom for SM-T805
Model SM-T805
Model name GALAXY Tab S
Country Italy
Version Android 6.0.1
Changelist 8816210
Build date Fri, 21 Oct 2016 11:03:56 +0000
Security Patch Level 2016-10-01
Product code ITV
PDA T805XXU1CPJ5
CSC T805ITV1CPJ2​
Credits:​Samsung for the firmware
Sammobile.com for the links
mega for their servers xD​

All firmwares are now online

This took me more than 20 hours to upload and download. I'm not mirroring these firmwares to other websites. If it doesn't work, use a proxy such as cybershell.biz or use a vpn
SM-T807T Firmware: https://mega.co.nz/#!ylYEBA4D!yWUPtuT60dLCIy_zCN_rqnN2L319oZYSCSFtOC_Pv6Q
Sprint SMT807P firmware here: https://docs.google.com/file/d/0B5DZenb7A53caXhNQkhMb0NkMFU/edit?usp=docslist_api

DUHAsianSKILLZ said:
If you want you can use my links from my thread. I have the latest builds up for some and even a twrp backup. Thought you might want to use then since your thread are mor organised
---------- Post added at 06:51 PM ---------- Previous post was at 06:51 PM ----------
http://forum.xda-developers.com/showthread.php?t=2934279
Click to expand...
Click to collapse
Thanks, I will wait until my uploads are finished and than upload it myself

LTE versions of both Tablets (SM-T705 and SM-T805) are online!

Tkkg1994 said:
LTE versions of both Tablets (SM-T705 and SM-T805) are online!
Click to expand...
Click to collapse
Glad you have the lte ones! I never got the chance to do them and only did the wifi ones. These take time lol.

DUHAsianSKILLZ said:
Glad you have the lte ones! I never got the chance to do them and only did the wifi ones. These take time lol.
Click to expand...
Click to collapse
I think you got other LTE versions than me, becaus I uploaded the european version and you maybe will upload the US version..:highfive:

Deleted

If I follow the procedure will it be like a dirty flash (I'll mantain all my data/apps/confs) or will I be forced to reinstall everything?
Thanks

dagosjt said:
If I follow the procedure will it be like a dirty flash (I'll mantain all my data/apps/confs) or will I be forced to reinstall everything?
Thanks
Click to expand...
Click to collapse
It will be like a dirty flash. You won't lose any data. Hit thanks bro :highfive:

All firmwares now online! If someone need a special one or another mirror, ask me

Tkkg1994 said:
All firmwares now online! If someone need a special one or another mirror, ask me
Click to expand...
Click to collapse
Your quick! Do you have google fiber or something lol.

DUHAsianSKILLZ said:
Your quick! Do you have google fiber or something lol.
Click to expand...
Click to collapse
No I haven't. I live in Switzerland No google fiber here xD

Got an S5 or an friend how got one? I have the officail update to android 5.0 Lollipop! Thread is hear:
http://forum.xda-developers.com/galaxy-s5/orig-development/official-lollipop-5-0-sm-g900f-t2962141

flash is faile my tab is t700 rooted and twrp
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T700XXU1ANK2_T700XAR1ANJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

u9689 said:
flash is faile my tab is t700 rooted and twrp
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T700XXU1ANK2_T700XAR1ANJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try Odin 1.84 or another firmware

u9689 said:
flash is faile my tab is t700 rooted and twrp
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T700XXU1ANK2_T700XAR1ANJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Looks like your tablet was disconnected ? And added again?
Try Odin1.85

My odin 3.9. But after flaahsing cf auto root ot work thans any way

I'm really quite new to Samsung tabs, does this firmware include stock software/ROM as well? Looking to get back to stock from custom ROM.

meleelord said:
I'm really quite new to Samsung tabs, does this firmware include stock software/ROM as well? Looking to get back to stock from custom ROM.
Click to expand...
Click to collapse
Yes all these firmwares are stock firmwares for the tab s. Just pick your model, and the right country of your device. Then flash with Odin!

GT-I9305 - I can't flash any stock samsung roms

Hay gays.
I buy samsung galaxy s3 lte but phone stuck in bootlop (can't go to download mode and recovery mode) well i buy JIG and work but now i
can't flash any stock samsung rom
odin shows me :
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:157)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDowanload.
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What does this mean ?

Ask a moderator to move your post to the q&a section for the i9305 for an answer.

pleps123 said:
Hay gays.
I buy samsung galaxy s3 lte and phone stuck in bootlop (can't go to download mode and recovery mode) well i buy JIG and work but now i
can't flash any stock samsung rom
odin shows me :
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:157)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDowanload.
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What does this mean ?
Click to expand...
Click to collapse
what are the roms that you tried to install with odin?
what is the installed rom in your device?

"what are the roms that you tried to install with odin?"
I tried flash stock 4.4.4 xeo ,4.3,4.1.2 for GT-I9305
"what is the installed rom in your device?"
I do not know , but probably stock 4.4.4 because from what I see in download mode ,I have knox bootloader.

Try pit file with 4.4.4 stock Ron.

Unfortunately it did not help

Try with mobile Odin pro

I tried using Heimdall but program shows me this error :
Failed to access device. libusb error: -12

pleps123 said:
I tried using Heimdall but program shows me this error :
Failed to access device. libusb error: -12
Click to expand...
Click to collapse
If you have Knox Bootloader you can not go down to 4.1.2 Jellybean.
Choose a Sammy based original Firmware 4.3 or 4.4.
Can you got to Recovery Mode?

I had your same problem
Try to install PHILZZ recovery with odin
then go to mount and storage
select mount usb storage (you must have an sd card inside phone)
connect to your computer
put sammy rom or similar (it take some time) try not to touch usb cable
when finished flash rom!!!!!!!!

Logo Hangs

So one day i decided to update my S6 from 5.0.2 to 5.1.1. I downloaded smart switch and updated through there.
The phone worked perfectly until I realized I need to root my phone so I attempted to root through TWRP using UPDATE-SuperSu 2.46.zip and I got stuck in a boot loop.
Then I searched google how to get out of my problem and somewhere along the line, I deleted my OS by deleating System in the wipe section of TWRP.
I tried to flash the stock rom but Odin gives me this error:
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am at my wit's end here and I really need some help so please reply if you have any useful information to get my phone back to normal.
I'm not sure if this has to do with anything but my phone says:
SW REV. CHECK FAIL. DEVICE: 3. BINARY: 2

Sonicboom9004 said:
So one day i decided to update my S6 from 5.0.2 to 5.1.1. I downloaded smart switch and updated through there.
The phone worked perfectly until I realized I need to root my phone so I attempted to root through TWRP using UPDATE-SuperSu 2.46.zip and I got stuck in a boot loop.
Then I searched google how to get out of my problem and somewhere along the line, I deleted my OS by deleating System in the wipe section of TWRP.
I tried to flash the stock rom but Odin gives me this error:
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am at my wit's end here and I really need some help so please reply if you have any useful information to get my phone back to normal.
I'm not sure if this has to do with anything but my phone says:
SW REV. CHECK FAIL. DEVICE: 3. BINARY: 2
Click to expand...
Click to collapse
Make sure the tar file in Odin is the latest 5.1.1 version. Samsung has patched the bootloader so that no one can downgrade anymore. Do you know what version 5.1.1 you were running before? If so, download that exact version.
Sent from my SM-G925T using Tapatalk

xmayhemreturnsx said:
Make sure the tar file in Odin is the latest 5.1.1 version. Samsung has patched the bootloader so that no one can downgrade anymore. Do you know what version 5.1.1 you were running before? If so, download that exact version.
Sent from my SM-G925T using Tapatalk
Click to expand...
Click to collapse
I've downloaded the T-mobile 5.1.1 version because I have not found a MetroPCS version. I hope that is the version I had before.
I downloaded it from here: http://forum.xda-developers.com/galaxy-s6/general/stock-firmware-official-stock-firmware-t3086387 (the first link)
EDIT: Currently going to try this out. I'll let you know if it works or not: http://forum.xda-developers.com/tmo...x-recovery-seandroid-enforcing-error-t3144011
EDIT 2: Doesn't work it just says md5 file invalid. Binary Check Failed.
EDIT 3: FIXED MY PHONE I just used the latest version of 5.1.1. Thanks for pointing me in the right direction xmayhemreturnsx. Link for the latest version for anyone else who needs help:http://forum.xda-developers.com/tmo...firmware-g920tuvu3doi1-g920tuvu2doh6-t3213001

Odin fail

Hello
I have a problem , try to restore my samsung tab s2 with original ROM by Odin but may fail when I try to flash the original ROM .
Have a T810

Great.

A littlr more information would help us help you.
Which version of Odin, what is failing, what if any messages are Odin or the device giving you?

kvadde said:
Hello
I have a problem , try to restore my samsung tab s2 with original ROM by Odin but may fail when I try to flash the original ROM .
Have a T810
Click to expand...
Click to collapse
I had some issues with ODIN failing when trying to go back to stock after rooting failed. I found a Samsung tool called SmartSwitch (suggested in the error I was getting )and installed and ran it on my PC to get my tablet back in stock working order. You can get it from Samsung.
Sent from my SM-T810 using XDA Free mobile app

The only reason why you would get issues flashing a stock firmware with odin is if the firmware isn't intended for your device.
Odin is quite smart and can prevent you from bricking your device.

I try to flash this one T810XXU1BOH7_T810XAR1BOH7_HOME.tar, Now i have flash custom rom so my tab si working but cant flash to stock rom.
Sorry my bad english :/

lakingslayer said:
I had some issues with ODIN failing when trying to go back to stock after rooting failed. I found a Samsung tool called SmartSwitch (suggested in the error I was getting )and installed and ran it on my PC to get my tablet back in stock working order. You can get it from Samsung.
Sent from my SM-T810 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you its work

I'm having the same issue. Odin fails on me when I'm attempting to install the stock rom.
I see the note about using SmartSwitch, but when I try to run it, it says my device isn't support. I tried used Kies, and I get the same message, that my device isn't supported.
I have a Galaxy Tab S2 8.0. T710 model, running Cyanogenmod 12.1
EDIT:
Here's what Odin is telling me.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

shaneman150 said:
I'm having the same issue. Odin fails on me when I'm attempting to install the stock rom.
I see the note about using SmartSwitch, but when I try to run it, it says my device isn't support. I tried used Kies, and I get the same message, that my device isn't supported.
I have a Galaxy Tab S2 8.0. T710 model, running Cyanogenmod 12.1
EDIT:
Here's what Odin is telling me.
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> sboot.bin
<ID:0/004> system.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
One more with problems when having CM. Try flashing TW ROM and then run Odin with stock firmware. BTW why ur odin is not checking MD5? What file did you download?

shaneman150 said:
I'm having the same issue. Odin fails on me when I'm attempting to install the stock rom.
I see the note about using SmartSwitch, but when I try to run it, it says my device isn't support. I tried used Kies, and I get the same message, that my device isn't supported.
I have a Galaxy Tab S2 8.0. T710 model, running Cyanogenmod 12.1
EDIT:
Here's what Odin is telling me.
Added!!
Odin engine v(ID:3.1100)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
boot.img
NAND Write Start!!
cache.img
hidden.img
recovery.img
sboot.bin
system.img
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Select repartition when flashing stock rom.