Related
There is a $100 bounty on this question. I will pay the xda member who assists me in getting to a solution through paypal. Even though I am a student I am offering this bounty because without resolving this issue my phone is nothing more than a paper weight (I use my SIM elsewhere). (A generous member may request to be paid less, but that is not what I expect). That must tell you how desperate I am to get this work.
Here's my issue:
I have a HTC G1 with Cyanogen Mod 4.2.1 which I am trying to connect with Villanova University's wi-fi network. It is a 802.1x, PEAP, MSCHAPv2 network.
Here are the university's official instructions for configuring a PC http://www.villanova.edu/unit/support/wireless/configuration/ and a MAC http://www.villanova.edu/unit/support/wireless/mac.htm. A quick glance there should tell you about the network we are trying to setup.
Here are the things I have tried
0. Searching on google, android forums, xda, everywhere
1. Asking my school's tech support, computer science professor's, other students
2. I have read up the man pages and supporting documentation for wpa_supplicant.conf
3.
I went to Settings > Wifi > Add Wi-fi Network. And entered:
SSID: Villanova
Security: IEEE 802.1X
EAP Method: PEAP
Phase 2 authentication: MSCHAP2
identity: <username>
wireless password: <password>
The wpa_supplicant.conf generated was:
ctrl_interface=tiwlan0
update_config=1
network={
ssid="Villanova"
scan_ssid=1
key_mgmt=IEEE8021X
group=CCMP TKIP
eap=PEAP
identity="<username>"
password="<password>"
phase2="auth=MSCHAP2"
priority=1
}
Click to expand...
Click to collapse
Here is logact *.W when I am toggling on and off the wi-fi. This section keeps repeating itself indefinitely and never connects.
Interesting first part of the log
Posted here to keep the post under maximum character limit: http://forum.xda-developers.com/showpost.php?p=4819214&postcount=6
Click to expand...
Click to collapse
Code:
D/SettingsWifiEnabler( 382): Received wifi state changed from Enabling to Enabl
ed
I/wpa_supplicant( 412): CTRL-EVENT-SCAN-RESULTS Ready
I/wpa_supplicant( 412): Trying to associate with 06:01:0e:e9:fc:ad (SSID='Villa
nova' freq=2412 MHz)
I/wpa_supplicant( 412): CTRL-EVENT-STATE-CHANGE id=-1 state=3
V/WifiMonitor( 98): Event [Trying to associate with 06:01:0e:e9:fc:ad (SSID='V
illanova' freq=2412 MHz)]
V/WifiMonitor( 98): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=3]
V/WifiStateTracker( 98): Changing supplicant state: SCANNING ==> ASSOCIATING
W/wpa_supplicant( 412): Failed to initiate AP scan.
I/wpa_supplicant( 412): CTRL-EVENT-SCAN-RESULTS Ready
I/wpa_supplicant( 412): CTRL-EVENT-SCAN-RESULTS Ready
I/wpa_supplicant( 412): Trying to associate with 06:0b:0e:e9:fc:ad (SSID='Villa
nova' freq=2462 MHz)
I/wpa_supplicant( 412): CTRL-EVENT-STATE-CHANGE id=0 state=3
V/WifiMonitor( 98): Event [Trying to associate with 06:0b:0e:e9:fc:ad (SSID='V
illanova' freq=2462 MHz)]
V/WifiMonitor( 98): Event [CTRL-EVENT-STATE-CHANGE id=0 state=3]
V/WifiStateTracker( 98): Changing supplicant state: ASSOCIATING ==> ASSOCIATIN
G
I/wpa_supplicant( 412): CTRL-EVENT-SCAN-RESULTS Ready
D/dalvikvm( 382): GC(0) freed 11647 objects / 588296 bytes in 98ms
I/wpa_supplicant( 412): Authentication with 06:0b:0e:e9:fc:ad timed out.
I/wpa_supplicant( 412): CTRL-EVENT-STATE-CHANGE id=0 state=0
I/wpa_supplicant( 412): CTRL-EVENT-STATE-CHANGE id=-1 state=2
V/WifiMonitor( 98): Event [Authentication with 06:0b:0e:e9:fc:ad timed out.]
V/WifiMonitor( 98): Event [CTRL-EVENT-STATE-CHANGE id=0 state=0]
V/WifiMonitor( 98): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=2]
V/WifiStateTracker( 98): Changing supplicant state: ASSOCIATING ==> DISCONNECT
ED
V/WifiStateTracker( 98): Changing supplicant state: DISCONNECTED ==> SCANNING
I/wpa_supplicant( 412): CTRL-EVENT-SCAN-RESULTS Ready
I/wpa_supplicant( 412): Trying to associate with 06:06:0e:e9:fc:ad (SSID='Villa
nova' freq=2437 MHz)
I/wpa_supplicant( 412): CTRL-EVENT-STATE-CHANGE id=-1 state=3
V/WifiMonitor( 98): Event [Trying to associate with 06:06:0e:e9:fc:ad (SSID='V
illanova' freq=2437 MHz)]
V/WifiMonitor( 98): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=3]
V/WifiStateTracker( 98): Changing supplicant state: SCANNING ==> ASSOCIATING
D/WifiStateTracker( 98): Deconfiguring interface and stopping DHCP
D/SettingsWifiEnabler( 382): Received network state changed to NetworkInfo: typ
e: WIFI[], state: DISCONNECTED/DISCONNECTED, reason: (unspecified), extra: (none
), roaming: false, failover: false, isAvailable: true
I/wpa_supplicant( 412): Authentication with 06:06:0e:e9:fc:ad timed out.
I/wpa_supplicant( 412): CTRL-EVENT-STATE-CHANGE id=0 state=0
I/wpa_supplicant( 412): CTRL-EVENT-STATE-CHANGE id=-1 state=2
V/WifiMonitor( 98): Event [Authentication with 06:06:0e:e9:fc:ad timed out.]
V/WifiMonitor( 98): Event [CTRL-EVENT-STATE-CHANGE id=0 state=0]
V/WifiMonitor( 98): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=2]
V/WifiStateTracker( 98): Changing supplicant state: ASSOCIATING ==> DISCONNECT
ED
V/WifiStateTracker( 98): Changing supplicant state: DISCONNECTED ==> SCANNING
I/wpa_supplicant( 412): CTRL-EVENT-SCAN-RESULTS Ready
I/wpa_supplicant( 412): Trying to associate with 06:06:0e:e9:fc:ad (SSID='Villa
nova' freq=2437 MHz)
I/wpa_supplicant( 412): CTRL-EVENT-STATE-CHANGE id=-1 state=3
V/WifiMonitor( 98): Event [Trying to associate with 06:06:0e:e9:fc:ad (SSID='V
illanova' freq=2437 MHz)]
V/WifiMonitor( 98): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=3]
V/WifiStateTracker( 98): Changing supplicant state: SCANNING ==> ASSOCIATING
D/WifiStateTracker( 98): Deconfiguring interface and stopping DHCP
D/SettingsWifiEnabler( 382): Received network state changed to NetworkInfo: typ
e: WIFI[], state: DISCONNECTED/DISCONNECTED, reason: (unspecified), extra: (none
), roaming: false, failover: false, isAvailable: true
I/wpa_supplicant( 412): Authentication with 06:06:0e:e9:fc:ad timed out.
I/wpa_supplicant( 412): CTRL-EVENT-STATE-CHANGE id=0 state=0
I/wpa_supplicant( 412): CTRL-EVENT-STATE-CHANGE id=-1 state=2
V/WifiMonitor( 98): Event [Authentication with 06:06:0e:e9:fc:ad timed out.]
V/WifiMonitor( 98): Event [CTRL-EVENT-STATE-CHANGE id=0 state=0]
V/WifiMonitor( 98): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=2]
V/WifiStateTracker( 98): Changing supplicant state: ASSOCIATING ==> DISCONNECT
ED
V/WifiStateTracker( 98): Changing supplicant state: DISCONNECTED ==> SCANNING
I/wpa_supplicant( 412): CTRL-EVENT-TERMINATING - signal 15 received
I/wpa_supplicant( 412): CTRL-EVENT-TERMINATING - signal 0 received
I/wpa_supplicant( 412): CTRL-EVENT-STATE-CHANGE id=-1 state=0
V/WifiMonitor( 98): Event [CTRL-EVENT-TERMINATING - signal 15 received]
V/WifiStateTracker( 98): Connection to supplicant lost
D/SettingsWifiEnabler( 382): Received wifi state changed from Enabled to Disabl
ing
E/vold ( 71): Unable to lookup media '/devices/platform/msm_sdcc.1/mmc_host
/mmc0/mmc0:0001'
E/vold ( 71): Error processing uevent msg (Unknown error: 0)
D/SettingsWifiEnabler( 382): Received wifi state changed from Disabling to Disa
bled
4. Here is the wpa_supplicant.conf that should work. Taken from:
http://hostap.epitest.fi/wpa_supplicant/ under Configuration file section. (Direct link to text file: http://hostap.epitest.fi/gitweb/git...lain;f=wpa_supplicant/examples/ieee8021x.conf)
ctrl_interface=tiwlan0
update_config=1
network={
ssid="Villanova"
key_mgmt=IEEE8021X
eap=PEAP
phase2="auth=MSCHAPV2"
identity="[actual_username]"
password="[actual_password]"
# ca_cert = /sdcard/Equifax.crt
}
Click to expand...
Click to collapse
4.1 I have manually changed the wpa_supplicant.conf to the above configuration and it didn't connect. Here is the logcat (it is basically the same as before):
I pasted it off-site so that my thread could be within xda's maximum length rules http://pastebin.ca/1643299
Click to expand...
Click to collapse
4.2 I have tried commenting out and inserting the ca_cert line but it generated the same log as above.
4.3. I have got hold of cert file from Ubuntu by looking under /usr/share/mozilla/ca-cert/. Ubuntu has a sym-link of Equifax*.pem to Equifax*.crt so I directly took the crt and am assuming that .crt = .pem. Is that so?
4.4 I have also exported the certificate from internet explorer and tried using it (all three formats, der, p7b and base-64)
5. I purchased and used the Wi-fi helper Pro program with no result
6. I have tried tinkering with wep104/40, ap_scan 1/2, auth_alg (open/shared) but to no avail.
Note:
1. When I simply click on the SSID displayed in the wifi settings section I am asked to enter a WEP key. Android doesn't identify Villanova network as PEAP-WEP-802.1X but simply sees it as WEP.
2. Wifi is working perfectly with 802.1x, PEAP, MSCHAP2 settings on my ipod touch, ubuntu 9.04 (through network manager it doesn't use wpa_supplicant.conf) and my win XP laptop.
3. Unsecured wifi networks are working on HTC g1
If you prefer to meet up via IM/VOIP I can give you dynamically generated logs as you suggest me edits and that could greatly decrease the time wasted going back and forth as we try to solve this horrendous issue.
I have completely exhausted myself trying to connect it to the Villanova wi-fi network. I have been breaking my head over this for 2months now. I am reaching out to get some assistance from you as my last resort.
Thank you for your time
SOLVED:
Issue resolved, I needed to add the following exact lines to my wpa_supplicant.conf
group=WEP104 WEP40
auth_alg=OPEN SHARED
WEP104 and OPEN, WEP 104 and SHARED, WEP40 and OPEN, WEP40 and SHARED none of those combinations will work. I needed the exact same lines!
Thank you members for your support. I hope this information will be useful to someone.
Id say just get a new phone man what youve just described is not really worth the headache. I realize its not the answer you want to hear, because I wouldnt either. Its a hell of a lot simpler though.
bubonik said:
Id say just get a new phone man what youve just described is not really worth the headache. I realize its not the answer you want to hear, because I wouldnt either. Its a hell of a lot simpler though.
Click to expand...
Click to collapse
I don't have any reason to suspect that this issue is hardware specific. WPA2, unsecured and other kinds of simpler wifi work perfectly. Unless this is worked out at a software level the issue will re-occur for me even in a new phone. Thanks for your input though.
I am still believing that this is not as simple for me as some of the other users because of the kind of wifi network that I am dealing with. However setting up Ubuntu and Iphone was a piece of cake.
This is just an initial stab, but you could try the following:
Code:
network={
ssid="Villanova"
key_mgmt=WPA-EAP
group=CCMP TKIP
eap=PEAP
identity="user_name"
password="password"
phase2="AUTH=MSCHAPV2"
priority=19
}
I noticed in yours above that you had MSCHAP2 instead of MSCHAPV2... Just an observation...
Vermithrax said:
This is just an initial stab, but you could try the following:
Code:
network={
ssid="Villanova"
key_mgmt=WPA-EAP
group=CCMP TKIP
eap=PEAP
identity="user_name"
password="password"
phase2="AUTH=MSCHAPV2"
priority=19
}
I noticed in yours above that you had MSCHAP2 instead of MSCHAPV2... Just an observation...
Click to expand...
Click to collapse
Thank you for your reply. I really hope we can figure this one out.
Here is what I did:
1. I tried the exact wpa_supplicant.conf that you provided (ofcourse with my own username and password) and it never connected.
adb -d logcat *.W
Code:
D/SettingsWifiEnabler( 301): Received wifi state changed from Disabled to Enabl
ing
D/WifiService( 91): ACTION_BATTERY_CHANGED pluggedType: 2
E/wpa_supplicant( 358): Set_key: Wrong Key
E/wpa_supplicant( 358): Set_key: Wrong Key
E/wpa_supplicant( 358): Set_key: Wrong Key
E/wpa_supplicant( 358): Set_key: Wrong Key
V/WifiStateTracker( 91): Connection to supplicant established, state=DISCONNEC
TED
E/wpa_supplicant( 358): prepare_filter_struct: type=0
I/wpa_supplicant( 358): CTRL-EVENT-STATE-CHANGE id=-1 state=2
I/wpa_supplicant( 358): CTRL-EVENT-SCAN-RESULTS Ready
V/WifiMonitor( 91): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=2]
V/WifiStateTracker( 91): Changing supplicant state: DISCONNECTED ==> SCANNING
W/wpa_supplicant( 358): Failed to initiate AP scan.
I/wpa_supplicant( 358): CTRL-EVENT-SCAN-RESULTS Ready
W/wpa_supplicant( 358): Failed to initiate AP scan.
D/SettingsWifiEnabler( 301): Received wifi state changed from Enabling to Enabl
ed
I/wpa_supplicant( 358): CTRL-EVENT-SCAN-RESULTS Ready
D/dalvikvm( 301): GC(0) freed 10619 objects / 484352 bytes in 90ms
I/wpa_supplicant( 358): CTRL-EVENT-SCAN-RESULTS Ready
I/wpa_supplicant( 358): CTRL-EVENT-SCAN-RESULTS Ready
I/wpa_supplicant( 358): CTRL-EVENT-SCAN-RESULTS Ready
I/wpa_supplicant( 358): CTRL-EVENT-SCAN-RESULTS Ready
I/wpa_supplicant( 358): CTRL-EVENT-SCAN-RESULTS Ready
I/wpa_supplicant( 358): CTRL-EVENT-SCAN-RESULTS Ready
I/wpa_supplicant( 358): CTRL-EVENT-SCAN-RESULTS Ready
I/wpa_supplicant( 358): CTRL-EVENT-SCAN-RESULTS Ready
I/wpa_supplicant( 358): CTRL-EVENT-TERMINATING - signal 15 received
I/wpa_supplicant( 358): CTRL-EVENT-TERMINATING - signal 0 received
I/wpa_supplicant( 358): CTRL-EVENT-STATE-CHANGE id=-1 state=0
V/WifiMonitor( 91): Event [CTRL-EVENT-TERMINATING - signal 15 received]
V/WifiStateTracker( 91): Connection to supplicant lost
D/SettingsWifiEnabler( 301): Received wifi state changed from Enabled to Disabl
ing
E/vold ( 71): Unable to lookup media '/devices/platform/msm_sdcc.1/mmc_host
/mmc0/mmc0:0001'
E/vold ( 71): Error processing uevent msg (Unknown error: 0)
D/SettingsWifiEnabler( 301): Received wifi state changed from Disabling to Disa
bled
I noticed that the Wrong_key messages also appear in all of my logs but I didn't paste the initial section of the log in my original post. I am posting it in the post below and adding that information to my original thread.
2. Both in the wpa_suppliacnt.conf that you provided, and this one:
network={
ssid="Villanova"
key_mgmt=IEEE8021X
eap=PEAP
phase2="auth=MSCHAPV2"
identity="user name"
password="password"
ca_cert="/etc/cert/ca.pem"
}
Click to expand...
Click to collapse
I tried connecting, one at a time, with both "auth=MSCHAP" and "MSCHAP2". But I got the same log as posted in the original thread. An interesting observation is that the Donut GUI puts in MSCHAP2 whereas the wpa_supplicant documentation says one should put MSCHAPv2. I am guessing these are aliases and don't make much of a difference as I tried both of them.
Initial part of logcat
Here is the inital part of the log
Code:
D/SettingsWifiEnabler( 301): Received wifi state changed from Disabled to Enabl
ing
D/WifiService( 91): ACTION_BATTERY_CHANGED pluggedType: 2
E/wpa_supplicant( 502): Set_key: Wrong Key
E/wpa_supplicant( 502): Set_key: Wrong Key
E/wpa_supplicant( 502): Set_key: Wrong Key
E/wpa_supplicant( 502): Set_key: Wrong Key
V/WifiStateTracker( 91): Connection to supplicant established, state=DISCONNEC
TED
E/wpa_supplicant( 502): prepare_filter_struct: type=0
E/wpa_supplicant( 502): prepare_filter_struct: type=1
E/wpa_supplicant( 502): prepare_filter_struct: type=3
I/wpa_supplicant( 502): CTRL-EVENT-STATE-CHANGE id=-1 state=2
I/wpa_supplicant( 502): CTRL-EVENT-SCAN-RESULTS Ready
V/WifiMonitor( 91): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=2]
V/WifiStateTracker( 91): Changing supplicant state: DISCONNECTED ==> SCANNING
W/wpa_supplicant( 502): Failed to initiate AP scan.
I/wpa_supplicant( 502): CTRL-EVENT-SCAN-RESULTS Ready
I/wpa_supplicant( 502): Trying to associate with 06:01:0e:e9:fc:ad (SSID='Villa
nova' freq=2412 MHz)
I/wpa_supplicant( 502): CTRL-EVENT-STATE-CHANGE id=-1 state=3
V/WifiMonitor( 91): Event [Trying to associate with 06:01:0e:e9:fc:ad (SSID='V
illanova' freq=2412 MHz)]
V/WifiMonitor( 91): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=3]
V/WifiStateTracker( 91): Changing supplicant state: SCANNING ==> ASSOCIATING
W/wpa_supplicant( 502): Failed to initiate AP scan.
clueless_user said:
However setting up Ubuntu and Iphone was a piece of cake.
Click to expand...
Click to collapse
This is why I said that, perhaps the Android OS doesnt know how to use this network. I havent taken a networking class in 10 years, but I wouldnt be surprised if it didnt work.
bubonik said:
This is why I said that, perhaps the Android OS doesnt know how to use this network. I havent taken a networking class in 10 years, but I wouldnt be surprised if it didnt work.
Click to expand...
Click to collapse
People have got it to work.
How about just spoofing the MAC address?
Use your computer, change it's MAC address to the G1. Register and swap it back.
Wii60 said:
How about just spoofing the MAC address?
Use your computer, change it's MAC address to the G1. Register and swap it back.
Click to expand...
Click to collapse
That is a pretty good idea but you see without any kind of spoofing Ubuntu and ipod touch were able to connect to the network and I am sure there is no MAC filtering going on.
In any case I followed both the methods outlined here (http://www.nthelp.com/NT6/change_mac_w2k.htm) to change the mac of my windows xp machine to my android phone's. I followed the instructions to the tee and still when I executed 'ipconfig /all' the mac address of my wireless card didn't change. I also tried using a couple of utilities but none of them were able to successfully change the mac of my wifi card (I can change the mac of my LAN just fine).
Still, following both the methods to change the mac, I changed the mac of my PC (not sure whether it was actually changed) connected to the wifi, disabled wifi on my PC and immediately tried connecting with the G1.
No success, got the same log posted in the original thread.
Alright, well, I'm by far no techie to this stuff, I've used linux a few times, my G1 is modded to the max, so I understand a little bit, but I think you guys are making this WAY more difficult than it really is.
Just try making the simplest changes first, then work your way up.
Maybe try setting the regulatory domain to 14? Or just trying each different type of authentication, etc. etc. ( Assuming you haven't done this in pure frustration already )
Idk, I usually seem to get random stuff to work just by fiddling around enough. Hell, I got my G1 rooted and my sd card to 3 partitions, that's a big accomplishment for me
I wish you luck buddy ( you could always just google a way to set up your pc/linux/mac computer to broadcast your own wifi net off the school's one you have on it ) <-- I think that's a pretty good idea, personally, I did that once with a Nintendo DS USB wifi adapter.
Of course, that would defeat the purpose of it being a mobile phone, if you were contained to just your dorm/room/whatever
Just throwin' idea around tryin to help ;D
((You know, people have gotten debian installed on their G1, so if it was easy on ubuntu, then.... Haha ;P ))
Exodeity said:
Just try making the simplest changes first, then work your way up.
Click to expand...
Click to collapse
That is where I started.
Maybe try setting the regulatory domain to 14?
Click to expand...
Click to collapse
Could you please expand on how that would work?
Of course, that would defeat the purpose of it being a mobile phone, if you were contained to just your dorm/room/whatever
Click to expand...
Click to collapse
Yes, that is the point.
Thanks for your input.
Exodeity said:
Maybe try setting the regulatory domain to 14?
Click to expand...
Click to collapse
I tried setting the Regulatory domain to 14, 13 and 12. No success. Same log as the one in the original thread.
i know very little myself but you are running a flashed ROM correct?
i use hero ROMs and have difficulty with them sometimes so maybe if you took your phone back to stock it may/may not work
i dont know if that would be an issue(it being a rooted or stock g1)
just trying to help out...
freaktractor said:
i know very little myself but you are running a flashed ROM correct?
i use hero ROMs and have difficulty with them sometimes so maybe if you took your phone back to stock it may/may not work
i dont know if that would be an issue(it being a rooted or stock g1)
just trying to help out...
Click to expand...
Click to collapse
I am on Cyanogen 4.2.2.1.
You need a flashed ROM to edit the wpa_supplicant.conf by hand.
I do understand that you are trying to help out.
The problem can be caused by storing the Key in any place other than the 1st slot. Also, you can try using "Wifi Helper" on the market. It edits the wpa_supplicant.conf and gives you more options
flybyme said:
The problem can be caused by storing the Key in any place other than the 1st slot. Also, you can try using "Wifi Helper" on the market. It edits the wpa_supplicant.conf and gives you more options
Click to expand...
Click to collapse
What do you mean by Key in the 1st slot? Please explain.
I have tried Wifi Helper Pro without any success.
clueless_user said:
What do you mean by Key in the 1st slot? Please explain.
I have tried Wifi Helper Pro without any success.
Click to expand...
Click to collapse
usually WEP has 4 key slots where a key is entered. by default, it is placed in the first one and the others are left blank. if they arent blank, its entirely possible that the key is being used in another slot. if the 1st one is left blank, the g1 can't connect (at least in my experience) because you cant manually set what slot you have the key to.
if you can connect your pc/laptop to the network without selecting the other slots, then the key is valid for the first slot. I just read that you have 801.11x so this should be a problem.
I do not know if the wpa_supplicant works for WEP
you could, however, try and flash a hero/rogers rom. ive found it has better internet connectivity for me. less hassle
flybyme said:
usually WEP has 4 key slots where a key is entered. by default, it is placed in the first one and the others are left blank. if they arent blank, its entirely possible that the key is being used in another slot. if the 1st one is left blank, the g1 can't connect (at least in my experience) because you cant manually set what slot you have the key to.
if you can connect your pc/laptop to the network without selecting the other slots, then the key is valid for the first slot. I just read that you have 801.11x so this should be a problem.
I do not know if the wpa_supplicant works for WEP
you could, however, try and flash a hero/rogers rom. ive found it has better internet connectivity for me. less hassle
Click to expand...
Click to collapse
Cyanogen 4.2.1 incorporates Donut so I am guessing the wireless features are comparable now.
I am sorry, I still don't understand what are the slots you are talking about. How do I make a key fit a particular slot (if that makes any sense)? You should remember that I am not manually entering any key as this is a 802.1x network.
Issue resolved, I needed to add the following exact lines to my wpa_supplicant.conf
group=WEP104 WEP40
auth_alg=OPEN SHARED
WEP104 and OPEN, WEP 104 and SHARED, WEP40 and OPEN, WEP40 and SHARED none of those combinations will work. I needed the exact same lines!
Thank you members for your support. I hope this information will be useful to someone.
Hi, yet another Nexus One wifi problem.
I'm using LeoFroyo, so I don't know if this is a problem with froyo, or that particular ROM. Anyway, basically when I press 'Scan' in the wifi settings, literally nothing happens. The list is really out of date, not showing nearby networks, and the status under the Wi-Fi checkbox is 'Disabled'. This is the output from logcat (searching for WiFi and wpa):
Code:
E/wpa_supplicant( 250): Ongoing Scan action...
E/wpa_supplicant( 250): Ongoing Scan action...
E/wpa_supplicant( 250): Ongoing Scan action...
E/wpa_supplicant( 250): Ongoing Scan action...
I/wpa_supplicant( 250): Authentication with 00:00:00:00:00:00 timed out.
I/wpa_supplicant( 250): CTRL-EVENT-STATE-CHANGE id=7 state=0 BSSID=00:00:00:00:00:00
I/wpa_supplicant( 250): CTRL-EVENT-STATE-CHANGE id=-1 state=2 BSSID=00:00:00:00:00:00
I/wpa_supplicant( 250): Trying to associate with SSID 'worcesterbeerfestival'
I/wpa_supplicant( 250): CTRL-EVENT-STATE-CHANGE id=-1 state=3 BSSID=00:00:00:00:00:00
I/wpa_supplicant( 250): Authentication with 00:00:00:00:00:00 timed out.
I/wpa_supplicant( 250): CTRL-EVENT-STATE-CHANGE id=9 state=0 BSSID=00:00:00:00:00:00
I/wpa_supplicant( 250): CTRL-EVENT-STATE-CHANGE id=-1 state=2 BSSID=00:00:00:00:00:00
I/wpa_supplicant( 250): Trying to associate with SSID 'Tomato'
I/wpa_supplicant( 250): CTRL-EVENT-STATE-CHANGE id=-1 state=3 BSSID=00:00:00:00:00:00
E/wpa_supplicant( 250): Ongoing Scan action...
E/wpa_supplicant( 250): Ongoing Scan action...
E/wpa_supplicant( 250): Ongoing Scan action...
I/wpa_supplicant( 250): Authentication with 00:00:00:00:00:00 timed out.
I/wpa_supplicant( 250): CTRL-EVENT-STATE-CHANGE id=10 state=0 BSSID=00:00:00:00:00:00
I/wpa_supplicant( 250): CTRL-EVENT-STATE-CHANGE id=-1 state=2 BSSID=00:00:00:00:00:00
I/wpa_supplicant( 250): Trying to associate with SSID 'Imperial-WPA'
I/wpa_supplicant( 250): CTRL-EVENT-STATE-CHANGE id=-1 state=3 BSSID=00:00:00:00:00:00
E/wpa_supplicant( 250): Ongoing Scan action...
E/wpa_supplicant( 250): Ongoing Scan action...
E/wpa_supplicant( 250): Ongoing Scan action...
E/wpa_supplicant( 250): Ongoing Scan action...
E/wpa_supplicant( 250): Ongoing Scan action...
Imperial-WPA is the correct network that is nearby. The others are remembered networks (well, Imperial-WPA is too).
Anyway, if I then disable wifi and re-enable it, this happens:
Code:
I/wpa_supplicant( 250): CTRL-EVENT-TERMINATING - signal 15 received
I/wpa_supplicant( 250): CTRL-EVENT-TERMINATING - signal 0 received
I/wpa_supplicant( 250): CTRL-EVENT-STATE-CHANGE id=2 state=0 BSSID=00:00:00:00:00:00
I/wpa_supplicant(25319): CTRL-EVENT-STATE-CHANGE id=-1 state=2 BSSID=00:00:00:00:00:00
I/wpa_supplicant(25319): Trying to associate with 00:1e:13:6e:81:00 (SSID='Imperial-WPA' freq=2412 MHz)
I/wpa_supplicant(25319): CTRL-EVENT-STATE-CHANGE id=-1 state=3 BSSID=00:1e:13:6e:81:00
E/wpa_supplicant(25319): Ongoing Scan action...
E/wpa_supplicant(25319): Ongoing Scan action...
I/wpa_supplicant(25319): CTRL-EVENT-STATE-CHANGE id=0 state=4 BSSID=00:1e:13:6e:81:00
I/wpa_supplicant(25319): Associated with 00:1e:13:6e:81:00
I/wpa_supplicant(25319): CTRL-EVENT-EAP-STARTED EAP authentication started
I/wpa_supplicant(25319): CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected
I/wpa_supplicant(25319): EAP-MSCHAPV2: Authentication succeeded
I/wpa_supplicant(25319): EAP-TLV: TLV Result - Success - EAP-TLV/Phase2 Completed
I/wpa_supplicant(25319): CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
I/wpa_supplicant(25319): CTRL-EVENT-STATE-CHANGE id=0 state=5 BSSID=00:00:00:00:00:00
I/wpa_supplicant(25319): CTRL-EVENT-STATE-CHANGE id=0 state=5 BSSID=00:00:00:00:00:00
I/wpa_supplicant(25319): CTRL-EVENT-STATE-CHANGE id=0 state=6 BSSID=00:00:00:00:00:00
I/wpa_supplicant(25319): WPA: Key negotiation completed with 00:1e:13:6e:81:00 [PTK=CCMP GTK=TKIP]
I/wpa_supplicant(25319): CTRL-EVENT-STATE-CHANGE id=0 state=7 BSSID=00:00:00:00:00:00
I/wpa_supplicant(25319): CTRL-EVENT-CONNECTED - Connection to 00:1e:13:6e:81:00 completed (auth) [id=0 id_str=]
I.e. it totally works and automatically connects. What the ****. Anyone have any ideas?
i have run into this myself, never had the time to actually test as you have and have a logcat
Running the 2nd release of the customized v4 honeycomb release, with reformatted EXT file system. The first release worked fine on my corporate network, but I'm having issues getting this one to connect.
Anyone else having issues with the wifi in this version? I'm attempting to connect to a WEP 802.11x network, using TTLS & PAP. Tried hand editing the wpa_supplicant.conf file in /data/misc/wifi, and it looks fine - yet under Wifi general setttings in Honeycomb it always shows "connecting..." and can't log on.
Try rebooting your router..
EDIT: router, sorry.
Sent from my HTC Desire using XDA App
Not sure what you mean when you say "rooter". I've rebooted the Nook a few times to no avail. If by rooter you mean the router here at work, I unfortunately don't have access to that. I work in a large 1500+ employee building.
Offhand, there shouldn't be a difference in wifi capability between v1 and v2
edit: some Logcat output
D/WifiStateMachine( 900): setDetailed state, old =CONNECTING and new state=DISCONNECTED
I/wpa_supplicant( 1767): CTRL-EVENT-STATE-CHANGE id=0 state=2
V/WifiMonitor( 900): Event [CTRL-EVENT-STATE-CHANGE id=0 state=2]
D/WifiStateMachine( 900): setDetailed state, old =DISCONNECTED and new state=SCANNING
I/wpa_supplicant( 1767): CTRL-EVENT-SCAN-RESULTS Ready
I/wpa_supplicant( 1767): Trying to associate with 00:19:07:c6:f3:e0 (SSID='cuda160' freq=2437 MHz)
V/WifiMonitor( 900): Event [Trying to associate with 00:19:07:c6:f3:e0 (SSID='cuda160' freq=2437 MHz)]
I/wpa_supplicant( 1767): CTRL-EVENT-STATE-CHANGE id=0 state=3
V/WifiMonitor( 900): Event [CTRL-EVENT-STATE-CHANGE id=0 state=3]
D/WifiStateMachine( 900): setDetailed state, old =SCANNING and new state=CONNECTING
I/wpa_supplicant( 1767): Authentication with 00:19:07:c6:f3:e0 timed out.
I/wpa_supplicant( 1767): CTRL-EVENT-STATE-CHANGE id=0 state=0
I/wpa_supplicant( 1767): CTRL-EVENT-STATE-CHANGE id=-1 state=2
V/WifiMonitor( 900): Event [Authentication with 00:19:07:c6:f3:e0 timed out.]
V/WifiMonitor( 900): Event [CTRL-EVENT-STATE-CHANGE id=0 state=0]
D/WifiStateMachine( 900): setDetailed state, old =CONNECTING and new state=DISCONNECTED
V/WifiMonitor( 900): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=2]
D/WifiStateMachine( 900): setDetailed state, old =DISCONNECTED and new state=SCANNING
I flashed it, but only used it for a couple minutes. Wifi was working, even in adhoc mode. But many apps I want to use don't work (they do in v1), so I switched back to v1.
HI, I rooted my Galaxy S phone (GT-I9000T running I9000TUBJP9) following [30.03.2012][CF-Root 4.4] J-P/S/Q-*,JV-1KBHIOPQRSTAUV,JVU,JW4 - su+bb+2e/CWM-rfs+ext4. I used both CF-Root-JP6-v1.2-Busybox-1.15.3.zip and CF-Root-JPM-v1.2-Busybox-1.15.3.zip images.
The end results are that everything works fine, except for secure wifi link. It CAN connect to NON-secure wifi links. But doesn't work for secure wifi. I tried to connect to 2 different secure wifi connections, one at work and one at home. Both failed.
From logcat, I saw the following error:
Code:
I/wpa_supplicant( 3036): Trying to associate with a0:cf:5b:fa:be:20 (SSID='XXXXXX' freq=2462 MHz)^M^M
I/WifiMonitor(19062): Event [ SCAN-RESULTS ]^M^M
E/wpa_supplicant( 3036): pmksa_cache_set_current enter ^M^M
I/wpa_supplicant( 3036): CTRL-EVENT-STATE-CHANGE id=-1 state=3 BSSID=a0:cf:5b:fa:be:20^M^M
D/BatteryService(19062): update start^M^M
D/BatteryService(19062): updateBattery level:94 scale:100 status:2 health:2 present:true voltage: 4180 temperature: 390 technology: Li-ion AC powered:false USB powered:true icon:17302171^M^M
I/StatusBarPolicy(19062): BAT. status:2 health:2^M^M
D/WifiService(19062): ACTION_BATTERY_CHANGED pluggedType: 2^M^M
I/WifiMonitor(19062): Event [Trying to associate with a0:cf:5b:fa:be:20 (SSID='XXXXX' freq=2462 MHz)]^M^M
I/WifiMonitor(19062): Event [CTRL-EVENT-STATE-CHANGE id=-1 state=3 BSSID=a0:cf:5b:fa:be:20]^M^M
E/wpa_supplicant( 3036): Ongoing Scan action...^M^M
V/WifiStateTracker(19062): Changing supplicant state: SCANNING ==> ASSOCIATING^M^M
D/NetworkStateTracker(19062): setDetailed state, old =SCANNING and new state=CONNECTING^M^M
D/ConnectivityService(19062): ConnectivityChange for WIFI: CONNECTING/CONNECTING^M^M
I/UNA ( 2449): SUPPLICANT_CONNECTION_CHANGE : CONNECTING^M^M
D/WifiSettings( 2657): updateAccessPoints(), WifiConfigureation list updated^M^M
D/WifiSettings( 2657): updateAccessPoints(), ScanResult list updated^M^M
I/wpa_supplicant( 3036): CTRL-EVENT-STATE-CHANGE id=15 state=4 BSSID=a0:cf:5b:fa:be:20^M^M
I/WifiMonitor(19062): Event [CTRL-EVENT-STATE-CHANGE id=15 state=4 BSSID=a0:cf:5b:fa:be:20]^M^M
V/WifiStateTracker(19062): Changing supplicant state: ASSOCIATING ==> ASSOCIATED^M^M
D/NetworkStateTracker(19062): setDetailed state, old =CONNECTING and new state=CONNECTING^M^M
I/wpa_supplicant( 3036): Associated with a0:cf:5b:fa:be:20^M^M
I/WifiMonitor(19062): Event [Associated with a0:cf:5b:fa:be:20]^M^M
I/wpa_supplicant( 3036): CTRL-EVENT-EAP-STARTED EAP authentication started^M^M
I/wpa_supplicant( 3036): [eap_sm_buildIdentity] identity : MyDomain\mylogin ^M^M
I/WifiMonitor(19062): Event [CTRL-EVENT-EAP-STARTED EAP authentication started]^M^M
I/wpa_supplicant( 3036): CTRL-EVENT-EAP-STARTED EAP authentication started^M^M
I/wpa_supplicant( 3036): [eap_sm_buildIdentity] identity : MyDomain\mylogin ^M^M
I/WifiMonitor(19062): Event [CTRL-EVENT-EAP-STARTED EAP authentication started]^M^M
I/wpa_supplicant( 3036): CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected^M^M
I/WifiMonitor(19062): Event [CTRL-EVENT-EAP-METHOD EAP vendor 0 method 25 (PEAP) selected]^M^M
I/wpa_supplicant( 3036): [eap_sm_buildIdentity] identity : MyDomain\mylogin ^M^M
D/dalvikvm( 2289): GC_FOR_MALLOC freed 8593 objects / 526640 bytes in 396ms^M^M
D/WifiSettings( 2657): updateConnectionState state(CONNECTING) hasError (false)^M^M
D/WifiSettings( 2657): updateConnectionState state(CONNECTING) hasError (false)^M^M
D/WifiSettings( 2657): updateConnectionState state(null) hasError (false)^M^M
I/wpa_supplicant( 3036): CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully^M^M
I/WifiMonitor(19062): Event [CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully]^M^M
I/wpa_supplicant( 3036): CTRL-EVENT-STATE-CHANGE id=15 state=5 BSSID=00:00:00:00:00:00^M^M
I/WifiMonitor(19062): Event [CTRL-EVENT-STATE-CHANGE id=15 state=5 BSSID=00:00:00:00:00:00]^M^M
V/WifiStateTracker(19062): Changing supplicant state: ASSOCIATED ==> FOUR_WAY_HANDSHAKE^M^M
D/NetworkStateTracker(19062): setDetailed state, old =CONNECTING and new state=AUTHENTICATING^M^M
D/ConnectivityService(19062): Dropping ConnectivityChange for WIFI: CONNECTING/AUTHENTICATING^M^M
[COLOR="Red"]W/wpa_supplicant( 3036): WPA: No wpa_ie set - cannot generate msg 2/4[/COLOR]^M^M
I/wpa_supplicant( 3036): CTRL-EVENT-STATE-CHANGE id=15 state=0 BSSID=00:00:00:00:00:00^M^M
I/WifiMonitor(19062): Event [CTRL-EVENT-STATE-CHANGE id=15 state=0 BSSID=00:00:00:00:00:00]^M^M
V/WifiStateTracker(19062): Changing supplicant state: FOUR_WAY_HANDSHAKE ==> DISCONNECTED^M^M
I/wpa_supplicant( 3036): CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys^M^M
I/WifiMonitor(19062): Event [CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys]^M^M
V/WifiStateTracker(19062): New network state is DISCONNECTED^M^M
Could someone tell me what to do next?
Thanks a lot in advance!
i think i got same problem
matthias1203 said:
i think i got same problem
Click to expand...
Click to collapse
What did you do after you had the problem? Did you flash it back to the stock image?
Yes but it was warking for two days and than again the same problem. I will try to flash one more time to stock rom and i will report when results.
Sent from my GT-I9001 using xda premium
which ROM did you use?
I used the latest Gingerbread image following this link:
http://forum.xda-developers.com/showthread.php?t=1837086&highlight=i9000t
So far no problem.
Hm again.
After a flash via odin stock rom. 2.3.5 croatia
I again got same problem.
At my home wifi everything ok. But in bar where i work when i go out of range and then come back it won't connect.
My friend got same phone and same rom but his phone always can connect.
On my It shows 'connecting...' and after 'disconect'.
Sent from my GT-I9001 using xda premium
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community.
It can be used without any need to have any Google application installed.
CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
STATUS: BETA
This is a preview build, do not install it if you want a stable ROM.
This is a preview of what is going down on CM13.0
Rom is in beta state so many bugs are to be expected!
All the source code is available on my Github.
I do this on my free time and unfortunately I don't have much.
Any help is a appreciated!
LINKS IN SECOND POST
Source code: https://github.com/lirokoa
CREDITS:
The whole Cyanogenmod team
Special thanks @dhiru1602 for his awesome work on exynos 4
All people who works on the Exynos 4 SOC, they desserve it
XDA:DevDB Information
CM13.0 N801X/N8000, ROM for the Samsung Galaxy Note 10.1
Contributors
lirokoa
Source Code: https://github.com/lirokoa
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Version Information
Status: No Longer Updated
Created 2015-12-12
Last Updated 2016-11-22
How to install:
Follow the usual procedure, important things is to use supported recovery, you can download it from the download section.
Others recovery will not be supported!
Also if you come from another ROM, full wipe is required.
FAQ:
Which Gapps to use? the one officially supported by Cyanogenmod, you can get them here
After installing ROM + Gapss, GApps keep crashing: Just update your recovery with the provided twrp.
Keyboard does not work: enable hardware keyboard in settings.
If you don't want to see cursor while using S-Pen, you can disable it it in settings / inputs
Camera is not working: use google camera
DOWNLOAD LINKS:
-01/09/2016:
-N8000: http://forum.xda-developers.com/devdb/project/dl/?id=20152
-N801x: http://forum.xda-developers.com/devdb/project/dl/?id=20151
Changelog:
- updated CM sources
Old releases :
B]-24/05/2016[/B]:
-N8000: http://forum.xda-developers.com/devdb/project/dl/?id=18575
-N801x: http://forum.xda-developers.com/devdb/project/dl/?id=18573
Changelog:
- Fixed auto rotation
- updated CM sources
-21/03/2016:
-N8000: http://forum.xda-developers.com/devdb/project/dl/?id=17496
-N801x: http://forum.xda-developers.com/devdb/project/dl/?id=17489
Changelog:
- Infrared consumer HAL fix
- dream of notification enabled
- bunch of kernel fix
- updated CM sources
-16/01/2016:
-N8000: http://forum.xda-developers.com/devdb/project/dl/?id=16244
-N801x: http://forum.xda-developers.com/devdb/project/dl/?id=16243
Changelog:
Comming
-28/12/2015:
-N8000:http://forum.xda-developers.com/devdb/project/dl/?id=15918
Changelog:
- Initial release
- Security warning: SELinux is set to permissive
-15/12/2015:
-N801X: http://forum.xda-developers.com/devdb/project/dl/?id=15689
Changelog:
- Fix wifi on clean install
-12/12/2015:
- N801X: http://forum.xda-developers.com/devdb/project/dl/?id=15632
Awesome stuff will be trying this today.
Tablet was dead...now I'm charging just for this been waiting ..can't wait to try!!! Thnx!
I suppose since you didn't post any HW list of working/non working, I guess that somehow they "technically can work" but some bugs may appear right?
Apart this, thank you very much for the effort, really appreciated!
Good first impressions. Well done. However, wifi is not working,
Shouldn't cm13 be marshmallow?
Derduden said:
Shouldn't cm13 be marshmallow?
Click to expand...
Click to collapse
Yeah right, forgot to change thread title
Sylheti said:
Good first impressions. Well done. However, wifi is not working,
Click to expand...
Click to collapse
Wifi working fine here, can you grab me a logcat and kernel log to check what is wrong?
JulianXhokaxhiu said:
I suppose since you didn't post any HW list of working/non working, I guess that somehow they "technically can work" but some bugs may appear right?
Apart this, thank you very much for the effort, really appreciated!
Click to expand...
Click to collapse
I managed to get it at more or less the same level than cm-12.1.
lirokoa said:
Wifi working fine here, can you grab me a logcat and kernel log to check what is wrong?
Click to expand...
Click to collapse
Sorry, I don't know how to do this. I am a novice and only know very basics of how to flash ROM and Gapps. I reverted back to Lollipop (20150423) ROM and wifi is back working fine.
Terribly sorry for asking this question, but what is the situation with cm13 for N8000?
Sylheti said:
Good first impressions. Well done. However, wifi is not working,
Click to expand...
Click to collapse
Here's a snipped of my logcat:
Code:
12-12 05:47:49.693 2241-2309/system_process E/WiFiServiceImpl: SAVE nid=0 uid=1000 name=android.uid.system:1000
12-12 05:47:49.693 2241-2309/system_process E/WiFiServiceImpl: CONNECT nid=-1 uid=1000 name=android.uid.system:1000
12-12 05:48:20.383 1923-1923/? E/bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null
12-12 05:48:20.402 1923-2712/? E/bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null
12-12 05:48:47.074 1923-1923/? E/bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null
12-12 05:49:03.437 2701-2701/com.android.inputmethod.latin E/RichInputConnection: Unable to connect to the editor to retrieve text.
12-12 05:49:03.455 2701-2701/com.android.inputmethod.latin E/RichInputConnection: Unable to connect to the editor to retrieve text.
12-12 05:49:12.449 2241-2309/system_process E/WiFiServiceImpl: SAVE nid=0 uid=1000 name=android.uid.system:1000
12-12 05:49:12.451 2241-2309/system_process E/WiFiServiceImpl: CONNECT nid=-1 uid=1000 name=android.uid.system:1000
12-12 05:50:04.431 1923-1923/? E/bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null
12-12 05:51:11.090 1923-1923/? E/bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null
12-12 05:51:22.769 2241-2309/system_process E/WiFiServiceImpl: CONNECT nid=-1 uid=1000 name=android.uid.system:1000
12-12 05:51:28.195 2241-2309/system_process E/WiFiServiceImpl: CONNECT nid=-1 uid=1000 name=android.uid.system:1000
12-12 05:51:58.748 1923-1923/? E/bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null
12-12 05:52:29.206 1923-2317/? E/bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null
12-12 05:52:35.005 1923-2712/? E/bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null
12-12 06:17:24.920 3960-3960/? E/cutils-trace: Error opening trace file: No such file or directory (2)
12-12 09:04:16.264 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 09:04:16.264 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 09:04:16.362 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:10:16.129 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:10:16.129 2241-2308/system_process E/WifiConfigStore: message=id=0 ssid="MyWifiSSID2" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 09:10:16.206 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 09:10:19.277 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID"-WPA_PSK to any
12-12 09:10:19.277 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 09:10:21.054 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:10:21.054 2241-2308/system_process E/WifiConfigStore: message=id=1 ssid="MyWifiSSID" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 09:16:19.120 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 09:16:19.124 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:16:21.312 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 09:16:21.312 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 09:19:34.127 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:19:34.127 2241-2308/system_process E/WifiConfigStore: message=id=0 ssid="MyWifiSSID2" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 09:22:21.123 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 09:22:21.129 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:22:23.247 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:22:23.266 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID"-WPA_PSK to any
12-12 09:22:23.266 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 09:22:25.050 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:22:25.051 2241-2308/system_process E/WifiConfigStore: message=id=1 ssid="MyWifiSSID" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 09:22:28.240 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 09:22:28.240 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 09:28:27.370 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:28:27.370 2241-2308/system_process E/WifiConfigStore: message=id=0 ssid="MyWifiSSID2" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 09:28:28.148 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 09:28:28.153 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:28:31.353 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID"-WPA_PSK to any
12-12 09:28:31.353 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 09:28:31.796 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:28:31.796 2241-2308/system_process E/WifiConfigStore: message=id=1 ssid="MyWifiSSID" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 09:34:31.256 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 09:34:31.258 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:34:34.456 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID"-WPA_PSK to any
12-12 09:34:34.456 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 09:34:34.563 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:34:35.063 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:34:35.063 2241-2308/system_process E/WifiConfigStore: message=id=1 ssid="MyWifiSSID" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 09:40:34.368 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 09:40:34.373 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:46:38.080 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 09:46:40.257 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 09:46:40.257 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 09:52:40.130 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:52:40.130 2241-2308/system_process E/WifiConfigStore: message=id=0 ssid="MyWifiSSID2" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 09:52:40.208 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 09:52:43.270 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 09:52:43.270 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 09:52:43.377 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:58:43.129 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:58:43.129 2241-2308/system_process E/WifiConfigStore: message=id=0 ssid="MyWifiSSID2" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 09:58:43.195 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 09:58:46.472 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID"-WPA_PSK to any
12-12 09:58:46.472 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 09:58:48.157 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "TWCWiFi"-NONE had autoJoinStatus=0 self added false ephemeral false
12-12 09:58:48.158 2241-2308/system_process E/WifiConfigStore: message=id=3 ssid="TWCWiFi" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 09:58:48.543 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 09:58:48.543 2241-2308/system_process E/WifiConfigStore: message=id=1 ssid="MyWifiSSID" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:08:06.820 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 10:08:06.841 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:08:06.848 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "TWCWiFi"-NONE had autoJoinStatus=0 self added false ephemeral false
12-12 10:08:08.236 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 10:08:08.237 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:14:08.129 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:14:08.129 2241-2308/system_process E/WifiConfigStore: message=id=0 ssid="MyWifiSSID2" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:14:08.197 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 10:14:08.199 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:14:11.255 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID"-WPA_PSK to any
12-12 10:14:11.255 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:14:11.640 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:14:11.640 2241-2308/system_process E/WifiConfigStore: message=id=1 ssid="MyWifiSSID" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:19:37.240 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:19:37.257 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 10:19:37.257 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:19:37.335 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:19:37.516 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:19:37.516 2241-2308/system_process E/WifiConfigStore: message=id=0 ssid="MyWifiSSID2" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:25:37.239 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 10:25:40.422 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:25:40.440 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 10:25:40.441 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:30:36.054 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:30:36.054 2241-2308/system_process E/WifiConfigStore: message=id=0 ssid="MyWifiSSID2" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:30:36.169 1923-1923/? E/bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null
12-12 10:30:36.259 2241-2308/system_process E/native: do suspend false
12-12 10:30:39.615 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 10:30:39.615 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:30:39.713 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:30:39.979 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:30:39.979 2241-2308/system_process E/WifiConfigStore: message=id=0 ssid="MyWifiSSID2" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:30:47.940 2701-2701/com.android.inputmethod.latin E/RichInputConnection: Unable to connect to the editor to retrieve text.
12-12 10:30:47.954 2701-2701/com.android.inputmethod.latin E/RichInputConnection: Unable to connect to the editor to retrieve text.
12-12 10:30:53.382 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:30:53.389 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 10:30:53.389 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:30:53.479 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:30:53.479 2241-2308/system_process E/WifiConfigStore: message=id=0 ssid="MyWifiSSID2" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:30:53.480 2241-2308/system_process E/WifiConfigStore: Connection failure, blacklist "MyWifiSSID2"-WPA_PSK 0 num failures 5
12-12 10:30:56.726 2241-2309/system_process E/WiFiServiceImpl: SAVE nid=0 uid=1000 name=android.uid.system:1000
12-12 10:30:56.727 2241-2309/system_process E/WiFiServiceImpl: CONNECT nid=-1 uid=1000 name=android.uid.system:1000
12-12 10:30:56.740 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:30:56.812 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:30:56.821 2241-2308/system_process E/WifiConfigStore: rewrite network history for "MyWifiSSID2"-WPA_PSK
12-12 10:30:56.878 2241-2308/system_process E/WifiConfigStore: rewrite network history for "MyWifiSSID2"-WPA_PSK
12-12 10:30:56.880 2241-2308/system_process E/WifiConfigStore: rewrite network history for "MyWifiSSID2"-WPA_PSK
12-12 10:30:56.904 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 10:30:56.905 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:30:56.911 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 10:30:56.911 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:30:56.921 2241-2308/system_process E/WifiConfigStore: rewrite network history for "MyWifiSSID2"-WPA_PSK
12-12 10:30:56.923 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:30:56.923 2241-2308/system_process E/WifiConfigStore: buildPnoList sortedWifiConfigurations size 4
12-12 10:30:56.923 2241-2308/system_process E/WifiConfigStore: found sortedWifiConfigurations : "MyWifiSSID"-WPA_PSK
12-12 10:30:56.923 2241-2308/system_process E/WifiConfigStore: found sortedWifiConfigurations : "CableWiFi"-NONE
12-12 10:30:56.923 2241-2308/system_process E/WifiConfigStore: found sortedWifiConfigurations : "TWCWiFi"-NONE
12-12 10:30:56.923 2241-2308/system_process E/WifiConfigStore: found sortedWifiConfigurations : "MyWifiSSID2"-WPA_PSK
12-12 10:30:56.932 2241-2308/system_process E/WifiConfigStore: rewrite network history for "MyWifiSSID2"-WPA_PSK
12-12 10:30:56.941 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:30:56.947 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 10:30:56.947 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:30:57.081 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:30:57.081 2241-2308/system_process E/WifiConfigStore: message=id=0 ssid="MyWifiSSID2" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:31:01.789 1923-2272/? E/bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null
12-12 10:31:01.826 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 10:31:01.827 2241-2308/system_process E/native: do suspend true
12-12 10:31:05.194 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 10:31:05.194 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:31:05.266 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:31:05.486 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:31:05.486 2241-2308/system_process E/WifiConfigStore: message=id=0 ssid="MyWifiSSID2" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:32:33.150 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:32:33.164 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:32:33.164 2241-2308/system_process E/WifiConfigStore: message=id=0 ssid="MyWifiSSID2" auth_failures=2 duration=20 reason=CONN_FAILED
12-12 10:32:34.477 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 10:32:38.228 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 10:32:38.228 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:32:38.313 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:33:37.123 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:33:37.123 2241-2308/system_process E/WifiConfigStore: message=id=0 ssid="MyWifiSSID2" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:33:38.128 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 10:33:41.347 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "TWCWiFi"-NONE had autoJoinStatus=0 self added false ephemeral false
12-12 10:33:41.347 2241-2308/system_process E/WifiConfigStore: message=id=3 ssid="TWCWiFi" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:33:41.363 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID2"-WPA_PSK to any
12-12 10:33:41.363 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:33:41.436 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:33:41.664 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID2"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:33:41.664 2241-2308/system_process E/WifiConfigStore: message=id=0 ssid="MyWifiSSID2" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:33:41.666 2241-2308/system_process E/WifiConfigStore: Connection failure, blacklist "MyWifiSSID2"-WPA_PSK 0 num failures 5
12-12 10:34:28.078 1923-1923/? E/bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null
12-12 10:34:28.113 2241-2308/system_process E/native: do suspend false
12-12 10:34:31.939 2241-2308/system_process E/WifiConfigStore: rewrite network history for "MyWifiSSID2"-WPA_PSK
12-12 10:34:31.942 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID"-WPA_PSK to any
12-12 10:34:31.942 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:34:32.619 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:34:32.619 2241-2308/system_process E/WifiConfigStore: message=id=1 ssid="MyWifiSSID" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:34:37.988 1923-2272/? E/bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null
12-12 10:34:38.015 2241-2308/system_process E/WifiStateMachine: Fail to set up pno, want true now false
12-12 10:34:38.017 2241-2308/system_process E/native: do suspend true
12-12 10:34:38.018 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "TWCWiFi"-NONE had autoJoinStatus=0 self added false ephemeral false
12-12 10:34:38.054 2885-2885/com.google.android.gms.persistent E/NetworkScheduler.SchedulerReceiver: Invalid parameter app
12-12 10:34:38.054 2885-2885/com.google.android.gms.persistent E/NetworkScheduler.SchedulerReceiver: Invalid package name : Perhaps you didn't include a PendingIntent in the extras?
12-12 10:34:38.178 1923-2317/? E/bt_a2dp_hw: adev_set_parameters: ERROR: set param called even when stream out is null
12-12 10:34:38.183 2241-2308/system_process E/native: do suspend false
12-12 10:34:41.385 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID"-WPA_PSK to any
12-12 10:34:41.385 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:34:41.444 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:34:41.931 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:34:41.931 2241-2308/system_process E/WifiConfigStore: message=id=1 ssid="MyWifiSSID" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:34:55.314 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:34:55.318 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID"-WPA_PSK to any
12-12 10:34:55.319 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:34:55.753 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:34:55.753 2241-2308/system_process E/WifiConfigStore: message=id=1 ssid="MyWifiSSID" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:35:09.119 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:35:09.124 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID"-WPA_PSK to any
12-12 10:35:09.124 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:35:09.631 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:35:09.631 2241-2308/system_process E/WifiConfigStore: message=id=1 ssid="MyWifiSSID" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:35:22.987 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:35:22.993 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "MyWifiSSID"-WPA_PSK to any
12-12 10:35:22.993 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:35:23.368 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "MyWifiSSID"-WPA_PSK had autoJoinStatus=0 self added false ephemeral false
12-12 10:35:23.368 2241-2308/system_process E/WifiConfigStore: message=id=1 ssid="MyWifiSSID" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:35:23.368 2241-2308/system_process E/WifiConfigStore: Connection failure, blacklist "MyWifiSSID"-WPA_PSK 1 num failures 5
12-12 10:35:40.780 2241-2308/system_process E/WifiConfigStore: rewrite network history for "MyWifiSSID"-WPA_PSK
12-12 10:35:40.783 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "TWCWiFi"-NONE to any
12-12 10:35:40.784 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:35:40.858 2241-2308/system_process E/WifiConfigStore: rewrite network history for "TWCWiFi"-NONE
12-12 10:35:41.217 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "TWCWiFi"-NONE had autoJoinStatus=0 self added false ephemeral false
12-12 10:35:41.217 2241-2308/system_process E/WifiConfigStore: message=id=3 ssid="TWCWiFi" auth_failures=1 duration=10 reason=CONN_FAILED
12-12 10:35:54.620 2241-2308/system_process E/WifiConfigStore: rewrite network history for "MyWifiSSID2"-WPA_PSK
12-12 10:35:54.623 2241-2308/system_process E/WifiConfigStore: Ignoring SSID re-enabled from supplicant: "TWCWiFi"-NONE had autoJoinStatus=0 self added false ephemeral false
12-12 10:35:54.628 2241-2308/system_process E/WifiConfigStore: saveWifiConfigBSSID Setting BSSID for "TWCWiFi"-NONE to any
12-12 10:35:54.628 2241-2308/system_process E/wifi_gbk2utf: g_pItemList is NULL
12-12 10:35:54.725 2241-2308/system_process E/WifiConfigStore: SSID temp disabled for "TWCWiFi"-NONE had autoJoinStatus=0 self added false ephemeral false
12-12 10:35:54.725 2241-2308/system_process E/WifiConfigStore: message=id=3 ssid="TWCWiFi" auth_failures=1 duration=10 reason=CONN_FAILED
I need full logcat from start of the device. And maybe kernel log.
You can also try to set SeLinux to permissive then try to connect.
Thumbs up for your great work!
Is it possible to do a dirty flash over cm 12.1?
LowPolyMan said:
Terribly sorry for asking this question, but what is the situation with cm13 for N8000?
Click to expand...
Click to collapse
you can flash n801x rom on n8000, the only problem is no data signal, no SIM card, no phone, no SMS... (anything related to the 3G model) the rest are okay
chuckbert said:
Thumbs up for your great work!
Is it possible to do a dirty flash over cm 12.1?
Click to expand...
Click to collapse
No. Do a clean install.
Thanks you so much
no wifi for me either, it has an error signing in to the wifi account (tried at home and at work)