I Flashed a wrong recovery mode in my LG Marquee and now its bricked ,
Now its only showing LG logo and power off and again power on this continues,
Also i can't go to recovery mode now,and pc is also not detecting my phone ,PLEASE HELP ME
nas1997 said:
I Flashed a wrong recovery mode in my LG Marquee and now its bricked ,
Now its only showing LG logo and power off and again power on this continues,
Also i can't go to recovery mode now,and pc is also not detecting my phone ,PLEASE HELP ME
Click to expand...
Click to collapse
Nothing helped in here?:
http://forum.xda-developers.com/showpost.php?p=14458927&postcount=1
- Got a bootloop or bricked your phone ?
Try the emergency recovery ; launch LGMobile Update (aka B2C) > Support > Recovery phone (aka SOS...)
Try hard reseting with R&D Test Tool (follow pdf guide)
Use SmartFlash with binary files of a firmware
Related
Hi,
I recently flashed official V30a (Europe rom) for O2X and wanted to flash back to V20c (Starhub). However, I didnt realise that the partition and bootloader were different between ICS and Gingerbread. So now basically my device is in a bootloop and it's bricked. Tried enter Nvidia Mobile Boot Recovery (VOL UP + VOL DOWN) many many times but nothing happens on my PC's device manager screen; no device detected. It can only enter SW upgrade mode (VOL DOWN) but it's useless and i cannot flash any roms with ICS bootloader and I need to flash NVFLASH RECOVERY first.
I'm desperate as Nvidia Mobile Boot Recovery is the foolproof method to unbrick and it cannot work.
Any ideas??
Try this one [TOOL] Full Brick Repair (Clean & Easy)
To nvflash mode remove battery push vol up/down then plug in usb.
use smartflash to flash v20c, leave battery in phone and it will work
hi everyone,
I was runnning a cm11 nightly rom but after and update from cyamogen i lost baseband and imei. i looked up some methods to fix the problem so i tried to go through the steps and downloaded the stock rom and tried to flash it using LGflash Tool and Software update Kdz but both options failed. I also tried the lg flash tool 2014 version, which got the farthest, but also failed. The just gets stuck on READY and the KDZ method gets stuck on line 207. The 2014 version of the flash tool strarts the upgrade but then a message comes up saying "there is not enough memory in the phone".
The problem is that now the phone is stuck in software upgrade mode and it doesn't even go into recovery mode ( i had CWM installed).
what should i do?
SOme help would be greatly appreciated,
thanks.
Just try to press and hold [vol -] and [power] until you got the android recovery figure and wait until they reboot again. If is again something wrong then try again to flash KDZ...
tabator said:
Just try to press and hold [vol -] and [power] until you got the android recovery figure and wait until they reboot again. If is again something wrong then try again to flash KDZ...
Click to expand...
Click to collapse
if i keep the vol - and power pressed nothing happens, it just stays in s/w upgrade mode. I've tried kdz and flash tools many times but still stuck on the same screen.
Hi.
Firstly I'm sorry for my English
So when I tried downgrade CM12 to CM11 I wanted to upload "Partition Table Tool for LG L90" by accident I reboot phone to system without system but with Partition table tool maximal . My L90 stopped at LG logo. When I tried enter to recovery (power button + Vol- 2x -> yes-> yes) my LG returns to logo.
I thought that I come back to stock by LGMobile Support Tool but "S/W upgrade" stop at 10%
Anyone know how I can deal with that?
up!
hello, I tried to unlock my bootloader because I was going to install orionlp rom but after flashing custom recovery my device turned black.
I tried to put my phone on but it didn't work...
I tried this guide to unbrick my phone http://forum.xda-developers.com/showpost.php?p=61808443 but when I try to put my phone in downloader mode nothing happens when I press the top vol button before puttingit in the usb. Normally there should be an image that shows you are a downloader;
Can someone pls help me???:crying::crying::crying::crying:
My Lg L90 D410 is not booting up. Whenever I am putting the battery, the lg logo is coming automatically(without pressing the power button) and keeps on blinking. Cannot even switch off the device. Not able to go to the recovery mode. Can anyone help me?
I think I'm having the same problem! My d410 (with CM13), restarted from scratch and did not stop more, he calls on the logo of LG, off and back on again soon, this form of loop.
I could not access the recovery or the download mode, the solution was to arrange for assistance.
Factory reset it using the button combo (vol down + power). if you cant do that, enter the phone into download mode by holding vol up and plugging it into a PC, then flash a new stock ROM.
nothing is working... no one is here who can help me???
where are the experts..
LG logo blinking at boot looks like a hardware problem... You can try the fix hard unbrick tutorial before sending it to fix (probably replace the main board):
http://forum.xda-developers.com/lg-l90/general/guide-unbrick-hard-bricked-l90-variants-t3173429