Database Develop

★ [ROM][STOCK] Android One 1st Gen [SPROUT] ★

Android One Universal STOCK ROMs [M/LP/KK]​
These ROMs are 100% Stock without any modification. Latest versions were backed up by the command "dd". LP versions were Identical from the official captured OTA LMY47O merge with the Official OTA. These roms are put together for rooted users who wants to fall back to google stock rom, And also for users who are having issues while installing the latest OTA. Nothing is removed from the original rom, and all signatures are intact. SPROUT8 LMY47V was based with the CM One fastboot images by @intersectRaven and captured Nexian Journey OTA LMY47V by Aandre Hartmen. KitKat Rom was based with the Official KPX44 MMX A1 Flashfile by moulnisky. Lastly, please take the time to read the instructions, FAQ, carefully and thoroughly before proceeding....
SPROUT4 [ M 6.x ] drive | Mirror [ LP 5.1.1 ] drive | d-h.st [ KK 4.4.4 ] drive | d-h.st
- Default Stock ROM for the following Android One devices
Micromax Canvas A1 AQ4501 (India)
Karbonn Sparkle V (India)
Spice Dream UNO (India)
MyPhone Uno (Philippines)
Symphony Roar A50 (Bangladesh)
- FEATURES
Move To SD [LP/KK]
Hidden Internal Storage (Apps only) [LP/KK]
If you are rooted, you may access your internal storage by navigating to "/data/media/0" [LP/KK]
SPROUT8 [ M 6.x ] drive | Mirror [ LP 5.1.1 ] drive | d-h.st [ KK 4.4.4 ] drive | d-h.st
- Default Stock ROM for the following Android One devices
Cherry Mobile One (Philippines)
Nexian Journey One (Indonesia)
Mito Impact (Indonesia)
Evercross One X (Indonesia)
Micromax Canvas A1 AQ4502 (India)
QMobile A1 (Pakistan)
- FEATURES
Internal Storage and SDcard are both accessible [LP Only]
No move to SD feature out of the box [LP Only]
move to SD feature is only available on Kitkat, Internal storage is not accessible [KK Only]
FLASHING PROCEDURE :
Download the ROM
Move the file to sdcard
Reboot to Custom Recovery
Install via Philz recovery if you want to fall back to stock recovery
Install via TWRP to stop the restoration of stock recovery
(ensure that "MOUNT SYSTEM PARTITION READ-ONLY" is uncheck)
Backup your current ROM (just in case)
No need to Wipe DATA (Read FAQ for more details)
Locate the file and install
Reboot... It will take about 10-15 minutes so be patient
Frequently Asked Questions :
1. Are they both compatible with my device?
Yes, as long as you are using an Android One first generation..
No need to unlock or re-lock bootloader
Install via custom recovery only
2. Will I still be able to recieve the official OTA updates in the near future?
Yes, as long as you have installed the default Stock ROM version for your device.
If you had installed Sprout4 over an Sprout8 device, the official OTA will fail due to mismatched signatures.
As long as you've never rooted and flash a custom recovery.
In case you have rooted your device, all you need to do is reflash the ROM when a new ota arrives and you'll be fine
3. Do I need to Wipe my Data and cache partitions before flashing the ROM?
Installing a sprout4 stock rom over an sprout4, no need to wipe anything.
Otherwise, if you flashed sprout4 over an sprout8 rom, you have to do a clean install.
Sprout4 to Sprout4 = No need to wipe data,cache partition
Sprout8 to Sprout8 = No need to wipe data,cache partition
Sprout4 to Sprout8 = Need to do a clean install, wipe data,cache,system
Sprout8 to Sprout4 = Need to do a clean install, wipe data,cache,system
If you are having apps FCs, try clearing the app data of the affected app, or try hard reset.
If all else fail, do a clean install.
4. How to install Stock ROM over a Custom ROM?
Backup your current ROM (just in case)
Its a Stock ROM, no need to downgrade or unroot your device
Install it like how you install your preferred Custom ROM for the first time
Do a clean install by wiping data, dalvik, cache and system
5. Got stuck with "Patching system image unconditionally"?
It might be a bad download
Always verify the hash prior to installation (check the howto verify the MD5sum below)
Wipe the system partition just in case
6. Why was my Custom Recovery perished?
If you flash the Stock ROMS using Philz Recovery 6.57.9. Your device will reverted back to Pure Stock including the Stock Recovery.
How to avoid this? If you have access to Aroma Filemanager using Philz, rename /system/bin/install-recovery.sh and /recovery-from-boot.p or flash superSU before rebooting your device.
Or simply use TWRP, prior to flashing the Stock ROM.
Just go back to Philz soon after the boot process was over if you wish to.
I prefer not to rename install-recovery.sh by default to give users an option to go back to stock recovery without providing a separate image of it.
7. For users who are having Irregular data connection and phone shows 'Emergency Calls Only'.
Go to Settings>More>Cellular networks>Access Point Name> then select the correct apn for your carrier.
If the problem still exists, go to Settings>More>Cellular network>Network Operator> then select the correct carrier.
WARNING!!!! PLEASE READ...
By installing the rom via philz recovery, android will automatically restore the stock recovery... Its a good thing for users who wants to go back to pure google stock rom.
WORKAROUND: If you wish to keep a Custom Recovery, and have access to Aroma Filemanager via Philz recovery, just rename /system/bin/install-recovery.sh and /recovery-from-boot.p, or simply flash superSU before rebooting your device.
I prefer not to rename install-recovery.sh by default to give users an option to go back to stock recovery without providing a separate image of it.
The simplest method to retain a custom recovery is to use TWRP prior to installation
Then flash Philz soon after the boot process was over if you wish to.
So basically.....
If you wish to be on Pure Stock with Stock Recovery... install it with Philz (CWM).
If you wish to be on Pure Stock and keep a Custom Recovery... install it with TWRP.
Recommended Recoveries
TWRP (SPROUT ALL) with Logo and OEM backup partition support
TWRP Materialize (SPROUT ALL)
TWRP Official (SPROUT4 ONLY)
Philz Recovery (Sprout ALL) flash this if you wish to go back to Philz Recovery
Stock Recovery (Sprout)
How to Root my device?
Just flash SuperSU with a custom recovery..
Or follow varuns rooting guide​
MD5 Sum
[SPROUT4 MRA58M] c75b28612f0a77ac5fc27084da4b6558
[SPROUT8 MRA58M] 7e34ce53e6bee8bb8adf635a05e2db7a
[SPROUT4 LMY48K] c0bd0113a84fdd03a0c7f3d245d71b67
[SPROUT8 LMY48K] 705b56acb2159b0fa9f05a86e7818db4
[SPROUT4 LMY47V] 9f62914a94e9b0ec5abd445120bd3b7c
[SPROUT8 LMY47V] 0063e621f6ffed6d0fe142de7e502d4d
[KITKAT KPX44] 377ea840259be29aa3383ab1757a6ede
How to Verify the MD5 signature?
If you are running Windows just download HashTabs and install. Right click on the downloaded file then click properties and look for "FILE HASHES" tab, verify if md5 hash are the same. On unix based system just execute this line in the terminal "md5sum SPROUT4-STOCK-ROM-LMY47V.zip". On your phone, just use ES explorer and then click properties then tap "Show Checksum" then compare the md5 hash. If the file hashes are identical you are good to go, Otherwise, redownload the file again due to bad probably.​
Universal OTA
Intended for users who have limited bandwidth. Otherwise, use the stock roms.
Flash via custom recovery only
OTA MRA58N from MRA58M (M 6.0) UNIVERSAL
OTA MRA58N for SPROUT4 and SPROUT8 MRA58M users only
​
Credits to the one who captured the OTA links...
Click to expand...
Click to collapse
OTA LMY48M from LMY48K (LP 5.1.1) UNIVERSAL
OTA LMY48M for SPROUT4 and SPROUT8 LMY48K users only(7+ MB)
​
Credits to the one who captured the OTA links...
Click to expand...
Click to collapse
OTA LMY48K from LMY47V (LP 5.1.1) UNIVERSAL
OTA LMY48K for SPROUT4 and SPROUT8 LMY47V users only(18+ MB)
​
Credits to the one who captured the OTA links...
Click to expand...
Click to collapse
OTA LMY47V from LMY47O (LP 5.1.1) UNIVERSAL
OTA LMY47V for SPROUT4 and SPROUT8 LMY47O users only(11+ MB)
Unroot first...then flash via custom recovery...​Credits to the one who captured the OTA links for Sparkle V and Nexian Journey One...
Click to expand...
Click to collapse
Flash at your own risk :good:
.
Credits : google, xda, varun.chitre15, OTA catchers, IntersectRaven, ghpranav, AHartmen, JGodslave, moulnisky, xpirt, rhar****, akhilnarang
.

will it work on stock micromax canvas a1? I've never rooted nor unlocked the bootloader. My phone is pure stock.

-BRK- said:
will it work on stock micromax canvas a1? I've never rooted nor unlocked the bootloader. My phone is pure stock.
Click to expand...
Click to collapse
it might work with locked bootloader, but it might not work with stock recovery. This ROM was based on Sparkle V OTA LMY47O + OTA LMY47V, 99% is unmodified except the updater-script to make the OTA fuse together and universal. So i am 100% sure it would work if you flash it thru custom recovery.

How to verify signature...??? Plz reply...

Vaibhavtheboss said:
How to verify signature...??? Plz reply...
Click to expand...
Click to collapse
If you are running windows os just download HashTabs and install. Right click on the downloaded file then click properties and click "FILE HASHES" tab, verify if md5 hash are the same. On unix based system just execute this line in the terminal "md5sum SPROUT4-STOCK-ROM-LMY47V.zip" then compare the md5 hash. If the hash are identical you are good to go... If not, your file was corrupt

Done... flashed it through Philz recovery... everything fine... Now on Stock Android 5.1.1
Sent from my Sparkle V using XDA Free mobile app

Vaibhavtheboss said:
Done... flashed it through Philz recovery... everything fine... Now on Stock Android 5.1.1
Sent from my Sparkle V using XDA Free mobile app
Click to expand...
Click to collapse
Im glad it worked for you mate

installed an OTA for sprout8 all variant in my mito impact a10. but it stuck bootloop. any idea? I've installed stock kernel 5.1
Sent from my MITO_A10 using XDA Forums

mrahmanda said:
installed an OTA for sprout8 all variant in my mito impact a10. but it stuck bootloop. any idea? I've installed stock kernel 5.1
Sent from my MITO_A10 using XDA Forums
Click to expand...
Click to collapse
Which ota did you flash? factory reset might work. You have to unroot first before you flash any 11mb ota. If all else fail you could try the stock rom for SPROUT8 above, already updated to 5.1.1 and compatible with all sprout8 device such as mito impact. Just flash it thru custom recovery.

installed sprout 4 for my nexian journey one, it works like a charm
thank you so much :good:

1cefire said:
Which ota did you flash? factory reset might work. You have to unroot first before you flash any 11mb ota. If all else fail you could try the stock rom for SPROUT8 above, already updated to 5.1.1 and compatible with all sprout8 device such as mito impact. Just flash it thru custom recovery.
Click to expand...
Click to collapse
the universal one.
yes, i think it is a little bit odd. i can find solution for my case :/
but thanks anyway
Sent from my MITO_A10 using XDA Forums

Cant intall or open
Flashing via PhilzTouch and current installed rom is CM12.1
i cant install the Rom for Sprout 8 Cherry mobile One version

mahesoo said:
installed sprout 4 for my nexian journey one, it works like a charm
thank you so much :good:
Click to expand...
Click to collapse
mrahmanda said:
the universal one.
yes, i think it is a little bit odd. i can find solution for my case :/
but thanks anyway
Click to expand...
Click to collapse
You're welcome dudes
gestrinix said:
Cant intall or open....Flashing via PhilzTouch and current installed rom is CM12.1
i cant install the Rom for Sprout 8 Cherry mobile One version
Click to expand...
Click to collapse
If you can't open the file It was probably corrupt. Read back to post #5 and try to verify the md5 hash. I was running cm 12.1 before, and currently running SPROUT8 on my 4gb variant Myphone UNO... running smooth without any hiccups... If the hash is not identical, try redownloading the file. Here is the md5 checksum
[SPROUT8 MD5] 0063e621f6ffed6d0fe142de7e502d4d
SPROUT8 running on 4gb variant MyPhone Uno

Do you have stock recovery for 5.1.1 sprout8?

fachry_my_id said:
Do you have stock recovery for 5.1.1 sprout8?
Click to expand...
Click to collapse
You don't have to go back to stock recovery to flash the ROM. Just flash it thru custom recovery, Philz/TWRP works fine

After flashed this.. I lost philz custom recovery. When I tried to get into recovery, it shows broken android symbol

Kumarankav said:
After flashed this.. I lost philz custom recovery. When I tried to get into recovery, it shows broken android symbol
Click to expand...
Click to collapse
I guess what you saw was stock recovery. But the strange thing is this ROM does not include stock recovery. Are you sure you flashed the same ROM? maybe you flash a different one? This ROM is basically the same official OTA LMY47O from this thread and the official OTA LMY47V. I have flashed both ROMS a couple of times without problems... Anyhow, if you want to go back to custom recovery just install another one thru fastboot, allinonetools, flashify and so forth
Here's a proof... Only Boot.img (kernel) and System partition + OTA LMY47V are included

error update from 5.1 to 5.1.1 mito impact A10
II've tried to update mito a10 impact of LMY470 to LMY47V via ota always want to install the update error after ..
mito I've never been in the root ..
is there a solution?

Thanks
im using evercoss a65 and its work
tyvm

agUNg.XENOS.inc said:
II've tried to update mito a10 impact of LMY470 to LMY47V via ota always want to install the update error after ..
mito I've never been in the root ..
is there a solution?
Click to expand...
Click to collapse
Did you flash the OTA LMY47O from 4gb variants before? Or are you using custom recovery? The best way is to Join Mito Impact a10 FB group and ask them if they have Official Ota LMY47V for mito, just flash it with stock recovery once you have the official ota. If it fails to flash, try factory reset then flash the official ota again. If all else fail, just flash a custom recovery with fastboot method without rooting your device, then flash the SPROUT8 version in the OP.
morissax said:
im using evercoss a65 and its work
tyvm
Click to expand...
Click to collapse
welcome mate

Help please ....with ota 6.0.1....

Hii guys i have download ota zip for 6.0.1 but when i install it on twrp recovery it shows error 7 ..
Can anyone one upload ota zip that can i install on my device my device is karbonn sparkle v...
Please help....

Yo, just flash universal zip of 6.0.1

sachin n said:
Yo, just flash universal zip of 6.0.1
Click to expand...
Click to collapse
Yes i did that to...bt it didn't work...

abadyal007 said:
Hii guys i have download ota zip for 6.0.1 but when i install it on twrp recovery it shows error 7 ..
Can anyone one upload ota zip that can i install on my device my device is karbonn sparkle v...
Please help....
Click to expand...
Click to collapse
first rtell if your device is stock or rooted and on a custom recovery?
if rooted , then download 6.0.1 stock rom, if not rooted, then just wait for ota update..

abadyal007 said:
Hii guys i have download ota zip for 6.0.1 but when i install it on twrp recovery it shows error 7 ..
Can anyone one upload ota zip that can i install on my device my device is karbonn sparkle v...
Please help....
Click to expand...
Click to collapse
Error 7 is usually cause of modified system files. Did you removed some system apps or installed xposed framework? If yes, the easiest way to install the ota is flash the full rom. The universal ota is already available which can be flashed in any Android one (Sprout 4) phone.
You can download the files from here:
http://forum.xda-developers.com/showpost.php?p=64733678&postcount=238

Faced the same problem.
I was on stock rom with twrp. Flashed thunderzap 3.5 kernal and then Super Su. No other modifications was done on my side(no system app remove and no xposed). Tried flashing 6.0.1 ota. Failed. So I think that's the kernal problem. I'm not sure though. Do we require original kernal for flashing ota in mm...
Edit update. I was wrong. Tried flashing 6.0.1 ota with official kernal too. Failed again with twrp. Then flashed with cwm, again failed error code 7 again. Let me try it with official recovery. Wait for results...

abadyal007 said:
Hii guys i have download ota zip for 6.0.1 but when i install it on twrp recovery it shows error 7 ..
Can anyone one upload ota zip that can i install on my device my device is karbonn sparkle v...
Please help....
Click to expand...
Click to collapse
naturist said:
Error 7 is usually cause of modified system files. Did you removed some system apps or installed xposed framework? If yes, the easiest way to install the ota is flash the full rom. The universal ota is already available which can be flashed in any Android one (Sprout 4) phone.
You can download the files from here:
http://forum.xda-developers.com/showpost.php?p=64733678&postcount=238
Click to expand...
Click to collapse
Found the problem. It is related to the user release keys and build props. Our phone should have 6.0/MRA58N or M. But it has 4.4.4/KPW53 user release keys. See the attachment. So I searched Google. See this forum
http://forum.xda-developers.com/oneplus-one/help/failed-zip-update-instalation-via-twrp-t3137841
It is for one plus one. But they faced the same issue. Any solution found please report.

Found the solution.
abadyal007 said:
Hii guys i have download ota zip for 6.0.1 but when i install it on twrp recovery it shows error 7 ..
Can anyone one upload ota zip that can i install on my device my device is karbonn sparkle v...
Please help....
Click to expand...
Click to collapse
Ota doesn't install because the recovery have wrong fingerprint of build no. The solution is very simple. Reflash 6.0 ota and do clean install. Don't flash recoevery or kernal. Now your default recovery os changed to stock again. Now download next mra58n ota. Don't download universal ota's as they might fail via stock recovery. Download device specific ota's.
And now if your build no. is mra58n then you can flash 6.0.1 ota file (75.6mb). Screenshots of successful install attached after facing same problem. Now on stock with jan patch installed too..

[ota] august security patches for android one sprout

These are the official MOB30W Over The Air Link, Captured via MOB30Q Using various Oem.props collected from all A1 devices.
Huge thanks to @ 1cefire for the all the Oem.prop collection.
MMX A1 [Sprout4] - - MOB30W From MOB30Q
Evercoss A65 [Sprout8] - - MOB30W From MOB30Q
Mito A10 [Sprout8]- - MOB30W From MOB30Q
Nexian Journey one [Sprout8] MOB30W From MOB30Q
Symphony Roar [Sprout4]-- MOB30W Form MOB30Q
Karbonn Sparkle v [Sprout4] - - MOB30W From MOB30Q
Mmx a1 [Aq4502] [Sprout8] - - MOB30W From MOB30Q
Myphone Uno [Sprout4] - - MOB30W From MOB30Q
Cherry Mobile one [Sprout8] - - MOB30W From MOB30Q
Spice dream uno [Sprout4] - - MOB30W From MOB30Q
Qmobile A1 [Sprout8] - - MOB30W From MOB30Q
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Full Stock MOB30W Rom == SPROUT4 || SPROUT8
Stock MOB30W Boot == SPROUT4 || SPROUT8
Stock recovery MOB30W == SPROUT4 || SPROUT8
Stock build.prop MOB30W == SPROUT4 || SPROUT8
Credits to JOSEPH GODSLAVE FOR THOSE FLASHABLE ZIPS
*. Installation and Instructions goes to #2
OTA Grabbers
*. Mmx a1 by Vishnu manjeri
*. Nexian, Mito, A65& Roar ota by Joseph Godslave
*. Mmx a1 aq4502, Cm one, MyPhone uno, spice, karbonn & QMobile a1 by Me
Huge thanks to @1cefire For his AWESOME TWRP Recovery...
Flash at your Own Risk

Installation >
How can i install this ota via stock recovery? [for those who on full stock, no root]
Just download appropriate OTA zip according your device, goto stock recovery, choose install update from SD card, choose zip, wait until it finish.....
After installation hit reboot system now.
How can i boot into stock recovery?
Follow below steps to boot into stock recovery : - Switch off your phone - Press Power button Volume Up simultaneously - Select Recovery mode [VOLUME_UP to select.VOLUME_DOWN is OK] - Wait for Device logo and then a Dead Android with Test "No Command" - Now hold Power then tap Volume up (in that order only) and leave it. - Congratulation! You are now in the stock recovery Code: Installation Instructions : - Download the appropriate OTA for your device - Place the OTA zip to your sdcard - Reboot to stock/custom recovery - Make a backup (just in case) - Perform a Factory reset.. Wipe data, dalvik, cache and system (recommended) - Locate the file and install - Reboot... It may take about 10-15 minutes so be patient Code: Follow below steps to boot into stock recovery : - Switch off your phone - Press Power button Volume Up simultaneously - Select Recovery mode [VOLUME_UP to select.VOLUME_DOWN is OK] - Wait for Device logo and then a Dead Android with Test "No Command" - Now hold Power then tap Volume up (in that order only) and leave it. - Congratulation! You are now in the stock recovery
My phone is rooted, how can I install this OTA?
Just install this recovery Here
Next, download appropriate OTA zip, reboot recovery > Choose advanced >choose ota installer > choose install zip> locate downloaded ota Zip >swipe to confirm flash >wait, let it install Voila! After successful installation hit reboot!
I had modified my system, such as build.prop and other sound mods, will it affect / broke ota installation?
Yep. It'll will broke the installation process, since you've modified the build prop and system, it'll surely give you error, so I'm requesting you to please roll back to stock build prop from here Sprout4 / Sprout8 [These build.props are flashable zips now, so all you need to do is just flash them and then try installing ota it's gonna install without errors. And Uninstall if you've any sound mods installed, then attempt the installation, it's gonna update successfully!
Note=This method works with systemless as well as system mode root, you can flash this ota over custom kernel too.
I've xposed and Layers theme installed, how can I successfully install this OTA?
FYI, just Uninstall xposed framework & layers theme, then apply OTA, it's gonna install successfully!
How can i re-root my devices, after installation of ota zip?
Yes, just reboot after installation of Official ota, after a successful boot, again boot back into that twrp recovery, simply flash custom boot image [custom kernel] followed by Super su 2.50 zip, wipe dalvik/Art [IF YOU wish] reboot. Done!
Yo, I'm using Sprout4 Rom on my Sprout8, which ota should I flash?
Nothing to worry!
Just download Sprout4 ota and flash it.
Compatibility ?
Any Sprout4 OTA over Sprout4
Any sprout8 OTA over Sprout8
Yay! There are links for full stock Roms, how can I flash them?
Yep, those links / zips are full stock Roms, if you're running on any build or running on any custom rom & wanna revert back to full stock with July security patch, then just download those zips, reboot recovery, perform a full wipe [Twrp> wipe > advanced > wipe everything except Micro_SD]
Then install that full stock rom zip, hit reboot key after installation!
Note>>Flash this MOB30W OTA zip Over MOB30Q only!

Thanks for the builds. It was a long journey for me to enjoy my Android one with regular updates. I sold it few days back and I'll surely miss you guys including 1cefire. See you around!

naturist said:
Thanks for the builds. It was a long journey for me to enjoy my Android one with regular updates. I sold it few days back and I'll surely miss you guys including 1cefire. See you around!
Click to expand...
Click to collapse
Deym!
Anyhow, nice to see ya.

Please provide full Roms asap. ?

DeepSahota said:
Please provide full Roms asap.
Click to expand...
Click to collapse
Dude, Sprout4 - - https://www.androidfilehost.com/?fid=24591000424951882
Sprout8 - - https://www.androidfilehost.com/?fid=24591000424951881
Credits to Joseph Godslave!

Stock Boot Links
Waiting for them.

supra_dos said:
Waiting for them.
Click to expand...
Click to collapse
One second bruh!
Edit - - Stock Boot MOB30W Sprout4
Stock Boot MOB30W Sprout8
Credits to Joseph Godslave!

gotcha

Thanks A lot....!

Tried flashing , Full Stock MOB30W Rom == SPROUT8 . it give me signature verification failed. HOw to proceed in that case?

droidbot678 said:
Tried flashing , Full Stock MOB30W Rom == SPROUT8 . it give me signature verification failed. HOw to proceed in that case?
Click to expand...
Click to collapse
Maga, did you tried flashing that zip via stock recovery or custom recovery!
If you tried flashing it via stock then you might get that error!
In case of you're tryin' flash that zip via TWRP, then please clean wipe your device and make sure your downloaded file is not corrupted!

Hello Seniors....
I want to flash the stock rom with august security patch,which is mentioned here.......
I have to wipe cache,dalvik,system,data??????
Or i should wipe internal storage too?????
Please help....i am really confused.......

rabsarkar said:
Hello Seniors....
I want to flash the stock rom with august security patch,which is mentioned here.......
I have to wipe cache,dalvik,system,data??????
Or i should wipe internal storage too?????
Please help....i am really confused.......
Click to expand...
Click to collapse
Well if you have custom rom before then u need to wipe data, system, dalvik and cache and if you are on stock then just flash the rom and wipe dalvik and cache only.

rabsarkar said:
Hello Seniors....
I want to flash the stock rom with august security patch,which is mentioned here.......
I have to wipe cache,dalvik,system,data??????
Or i should wipe internal storage too?????
Please help....i am really confused.......
Click to expand...
Click to collapse
Yes, just download Full stock rom and perform a full wipe by wiping system, internal, cache art and install that full stock rom zip, reboot.

Thnku Seniors......
Btw in my case,i am in stock rom with june security patch......
I modified the build.prop....changed some system apps.......
To get security updates,i again reverted back the stock build.prop......
Yet when i m flashing the security update of July,it is showing error 7....i fully unrooted the set
These are the problems with various recoveries
1)-Stock recovery-problem with system app
2)-Twrp OTA Installer-you have modified build.prop
3)-Twrp Official latest-error 7(failed to update)
.
.
.So i want to flash stock rom of august security patch....
What to wipe?????
Plzz solve my problm and let me out of this confusion????????????

rabsarkar said:
Thnku Seniors......
Btw in my case,i am in stock rom with june security patch......
I modified the build.prop....changed some system apps.......
To get security updates,i again reverted back the stock build.prop......
Yet when i m flashing the security update of July,it is showing error 7....i fully unrooted the set
These are the problems with various recoveries
1)-Stock recovery-problem with system app
2)-Twrp OTA Installer-you have modified build.prop
3)-Twrp Official latest-error 7(failed to update)
.
.
.So i want to flash stock rom of august security patch....
What to wipe?????
Plzz solve my problm and let me out of this confusion????????????
Click to expand...
Click to collapse
Yo my man, just do this if you wanna fall back to Google stock Rom!
1. Download full stock rom [ Look OP for link]
2. Reboot into recovery [Twrp / philz]
3. If you're using twrp then, go to wipe - > Advanced wipe >Choose all except SD card> swipe to wipe. In case if you're running philz, choose *Clean to install new rom, then flash zip.
4. Once the wipe done, now go back, and choose install zip > choose the stock rom MOB30W Zip where you keep on your SD, then swipe to install > wait few minutes, after completion of installing zip, tap reboot!
Voila done! :3 Now you're on full stock MOB30W with August security patch.

It's time for September patch, where it is bro?

iVirenSakariya said:
It's time for September patch, where it is bro?
Click to expand...
Click to collapse
Wait bro....u will get it within 4-5 days

iVirenSakariya said:
It's time for September patch, where it is bro?
Click to expand...
Click to collapse
Wait.

[ROM] OxygenOS Open Beta 9 (Nougat) Update and Installation!!

Hi everyone,
We appreciate everyone’s feedback from the OxygenOS Open Beta 8. With your help, we have optimized and improved several key areas.
The changes include:
Added Expanded Screenshots
Shelf Design Optimizations
General UI Optimizations
DPI Optimizations
Battery Performance Optimizations
Stability and Performance Optimizations
General bug fixes
Please visit the download page here:
http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_openbeta_9/
If you’ve already flashed a previous Open Beta build, you will receive this update via OTA. If you haven’t, you will need to flash this build by ADB sideload. Your data may transfer, but there is always a possibility of losing personal data, so be sure to backup all of your important data before flashing this build. As stated before, once you flash the Open Beta, you’ll continue getting Open Beta OTAs.
Please follow the link below for the UI/UX experience survey. We’d really appreciate a few minutes of your time, as it will help us make OxygenOS even better. One last thing: this is a limited program, so we may disable this download link once we receive enough feedback.
- Feedback on UI/UX: https://goo.gl/forms/hEqMPq9U9QNrxvhc2
Note: If you flash this Open Beta build, you’ll receive Open Beta OTAs (but not official OTAs). You’ll need to manually (clean) flash back to our official builds to continue receiving official OTAs. Rolling back to official OxygenOS versions require wiping data and cache.
Thank you for your patience and as always, we look forward to hearing your continued feedback in the bug reporting forum here: https://forums.oneplus.net/feedback/.
Thank you for helping us build a better OxygenOS.
Never settle.

Installation Methods
Before we start:This method is only for the OnePlus 3
Follow the steps correctly otherwise you may brick your device. I am not responsible for any damage to your device, please ensure that your device is at least 60% charged to prevent the accidental shutdown in-between the update process.
Downloads:
Beta 9 Full Zip Official Download
Compatible Stock Recovery
********************* For Stock Non Rooted Users with Stock Recovery *****************
1. Download the appropriate OTA/Full Zip from above link and place it in the root folder.
2. Navigate to Settings > System Updates > Settings Icon > Local Upgrade & Select the OTA File
3. Once selected system would prompt upgrade now
4. Select upgrade now and system would reboot in stock recovery and flash the OTA
5. The installer would itself flash the OTA and reboot the device.
The Device will reboot and your OnePlus 3 is now running on the latest OxygenOS firmware & OS.
PS: The first boot may take some time so keep calm and wait for it to boot.
* After flash is successful go back to recovery and a wipe of cache is recommended.
* If in any case flash is unsuccessful the system would prompt you to download the full 1.4GB zip. So download that and follow the same process as above.
************************ For Rooted Users with TWRP Recovery ************************
Download Beta 9 Full Zip
1. Download the Beta 9 Full Zip on your phone internal memory.
2. Download the Latest SuperSU SR5
4. Reboot To TWRP (Modified 28) & Take a Nandroid of your existing ROM
5. Go to Wipe > Advance Wipe > Select Dalvik & Cache & Swipe to Wipe
6. Install Menu > Select Beta 9 Rom Zip > Swipe to Flash
7. Wipe Dalvik & Cache
8. Flash SuperSU to maintain root
9. Reboot System and Enjoy the Beta 9 Update
* Do not flash Xposed as not compatible with 7.0 builds yet
If you come from a custom rom, i recommend a clean flash and make sure you use the modified TWRP 3.0.2-1.28 as the official one is incompatible with the CB firmware yet.
PS: The first boot may take some time so keep calm and wait for it to boot and the system would boot twice due to flash of supersu so keep calm
PS: Rooted users may either flash the full Beta 9 Zip or they need to flash the previous full zip beta 8 first to overwrite system partition followed by the relevant Beta 9 OTA zip for a successful flash else just the OTA flash would fail with error 7 in TWRP

I was on TWRP (modded) and rooted. Installed the update (OTA) and now my phone just reboots to TWRP no matter what I do (I have even made a factory reset and reinstalled Beta8)

salomaoa said:
I was on TWRP (modded) and rooted. Installed the update (OTA) and now my phone just reboots to TWRP no matter what I do (I have even made a factory reset and reinstalled Beta8)
Click to expand...
Click to collapse
You can't install the ota update on TWRP recovery. You need the stock one.
Try reflashing TWRP recovery via fastboot and then flash open beta 9(not the ota)

salomaoa said:
I was on TWRP (modded) and rooted. Installed the update (OTA) and now my phone just reboots to TWRP no matter what I do (I have even made a factory reset and reinstalled Beta8)
Click to expand...
Click to collapse
Download the recovery at the bottom of the page.
http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_openbeta_9/
Copy it onto your phone with the this Open Beta 9 package.
Start up TWRP, format /dalvik, /cache, /system, /data.
Flash the Open Beta and clean the caches if asked.
Flash the original recovery from TWRP as recovery image, and restart your phone afterwards.
Your phone may boot into the new recovery, then show "Update failed", then do another restart, but after that mine was working.

Does all partitions support f2fs?

smk513 said:
Does all partitions support f2fs?
Click to expand...
Click to collapse
AFAIK, only data partition is f2fs

Sun90 said:
AFAIK, only data partition is f2fs
Click to expand...
Click to collapse
I wonder if the new version is possible...
Thank you for your response.

flashing with twrp will result in recovery booting loop. after downloading ota simply reboot to recovery, download oneolusrecovery from ob9 page. transfer it to phone. select install image in twrp, select reocover, flash as recovery and reboot to recovery. itll show updating.. takes about 20mins

Will modified twrp also not work?

Really? The modified twrp doesnt work? I,ve read the thread in oneplus forum and some are saying it worked for them. :/
Edit: anyways, im on modified twrp, rooted, beta 8, can i dirty flash beta 9?

jfodra said:
Really? The modified twrp doesnt work? I,ve read the thread in oneplus forum and some are saying it worked for them. :/
Click to expand...
Click to collapse
It works. I flashed the full zip with it.
Edit:
Yes you can dirty flash. Everything is working as expected.

jfodra said:
Really? The modified twrp doesnt work? I,ve read the thread in oneplus forum and some are saying it worked for them. :/
Click to expand...
Click to collapse
It will work with full zips !! It won't work it ota updates
As simple as this

Dirty flashed over OB8, everything working fine!
Edit:
Using Modified TWRP

Dirty flashed over OB8, so far no issue's.
Did flash TWRP img after update in TWRP (just to be sure), first boot took a while tho.
Anyone tried supersu?

I have this from yesterday. I was on 3.2.8 from OnePlus site, dated 12.05.16.
Clean flash with TWRP 3.0.2-1.28, thanks to eng_stk. Flash the rom & SuperSU SR5 (if you want root). Refalsh recovery 3.0.2-1.28. Reboot to recovery. If it not works reflash recovery.
Then reboot to system.
I did not flash any mods. All it's ok.

t181 said:
It works. I flashed the full zip with it.
Edit:
Yes you can dirty flash. Everything is working as expected.
Click to expand...
Click to collapse
Oh okay thanks. So is it the same as before? Flash beta 9, flash twrp again, then flash sr5 then reboot?
Edit: Nvrmind, flashed it already and d*mn. It does feel smoother than beta 8. ???

Can it be flashed over modded Open Beta 8 ?

M3ntoR said:
Can it be flashed over modded Open Beta 8 ?
Click to expand...
Click to collapse
Yep. Just make sure to have the full update and not the OTA one. Also, just in case make sure you have the TWRP img and super-su on your phone's memory to be able to flash them again

Any mirror for this? Full zip is downloading really slow and I've already stucked on twrp after OTA Need to dirty flash the full zip, but it is going to dowload around Christmas with that speed...

[OFFICIAL] OxygenOS 10.0.1 (Android Q 10.0) OTA for OnePlus 5 (cheeseburger)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ANNOUNCEMENT​Hey everyone,
We are starting to push the incremental roll-out of OxygenOS version 10.0.1 for the OnePlus 5/T devices.
Changelog:
Code:
[B]System:[/B]
• Fixed the abnormal call recording issue
• Fixed the de-activated alarm issue when the phone was powered off
• Updated Android Security Patch to 2020.09
• Updated GMS package to 2020.08
[B]Full Screen Gestures:[/B]
• Back gesture from the bottom of the screen is available (OP5T only)
[B]Camera:[/B]
• Electronic Image Stabilization has been added, bringing you the more stable shooting experience
Explore what's new on Android 10 here.
Notes:
• If you don't have the Community app installed on your device, feel free to download it from here. You can check here for more information on the integrated Feedback tool. Make sure to let us know how you feel about the build here in the thread too, we look forward to reading your feedback.
• Click here to find out how to take logs on OxygenOS.
Warning: Please remove your existing screen lock/pin/pattern/password and set it to swipe before starting the update process.
DOWNLOADS​
Full ROM Zips:
• OxygenOS 10.0.1: Official Link | AndroidFileHost Mirror | Google Drive Mirror
• MD5: 8f41d1cca57e8a91879f4b09088103b4
Custom Recoveries:
• TWRP by mauronofrio: Official Link
• TWRP by poad42: Official Link
• blu_spark TWRP by eng.stk: Official Link
• Official TWRP by Dees_Troy: Official Link
Root:
• Magisk: Official Link
Warning: Do not flash partial update OTAs (under 1 GB) on a modified/rooted device! If you want to use partial OTAs, you must first flash the full OxygenOS zip that it applies to, and then flash the partial OTA from stock recovery. Flashing partial OTAs from TWRP will either fail or soft brick your device. You can return to a usable state by flashing a full zip in recovery.
FLASHING INSTRUCTIONS​
Download the necessary files from the section above and follow the steps below:
Note: Dirty flashing is fine if you are running an old OxygenOS version or a ROM based on OxygenOS. If you are, however, coming from a Custom ROM, you must clean flash.
For Non-Rooted Users with a Locked Bootloader and Stock Recovery:
Download the full zip/incremental OTA from the downloads section above and place it in the root of your internal memory
Reboot to stock recovery > Shutdown device > Press Volume Down + Power buttons together
Select language > Install menu > Install from internal > Select the full zip > Flash
After a successful flash > Wipe cache
Reboot
Note: First boot may take some time, so please be patient and wait for it to boot.
[Dirty Flash] For Users with an Unlocked Bootloader and TWRP Recovery coming from H2OS/OOS:
Download the full ROM zip from the downloads section above
Transfer the zip to the root of your device's internal storage
Only needed if you are using a TWRP that does not ignore the compatibility.zip check: Remove the compatibility.zip from the downloaded full ROM zip with either MiXplorer or Total Commander (not with any other tool!) on your device itself
Reboot to TWRP and take a nandroid backup of your existing ROM
Flash Magisk Uninstaller (recommended)
From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
From the TWRP menu, Install > Select full ROM zip > Swipe to flash
Flash the latest stable Magisk in case you want to root
From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
If you were decrypted earlier, flash xXx No Verity 4.0.zip from here
Reboot
Note: First boot may take some time, so please be patient and wait for it to boot.
Warning: Dirty flashing (update) can be risky! Remember that if you face issues after dirty flashing, you will have to clean flash.
[Clean Flash] For Users with an Unlocked Bootloader and TWRP Recovery:
Download the full ROM zip from the downloads section above
Transfer the zip to the root of your device's internal storage
Only needed if you are using a TWRP that does not ignore the compatibility.zip check: Remove the compatibility.zip from the downloaded full ROM zip with either MiXplorer or Total Commander (not with any other tool!) on your device itself
Reboot to TWRP and take a nandroid backup of your existing ROM
Flash Magisk Uninstaller (recommended)
From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache, cache, system, vendor and data> Swipe to wipe
From the TWRP menu, Install > Select full ROM zip (modified one with compatibility.zip removed, in case you're on Oreo or unmodified one, in case you're on Pie) > Swipe to flash
Flash the latest stable Magisk in case you want to root
From the TWRP menu, Wipe > Advanced wipe > Select dalvik-cache and cache > Swipe to wipe
Optional: If you wish to decrypt, format data via TWRP (please note that wiping the data partition, which we did in the 5th step above, is not the same as formatting it) and after that flash xXx No Verity 4.0.zip from here
Reboot
Note: First boot may take some time, so please be patient and wait for it to boot.
Never Settle.
XDA:DevDB Information
[OFFICIAL] OxygenOS Stable for the OnePlus 5, ROM for the OnePlus 5
Contributors
Funk Wizard, shadowstep, Some_Random_Username
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2018-09-28
Last Updated 2020-11-20

Download Section Moved to OP and is now maintained by the Official Maintainers !!
Thread Contributors:
@shadowstep
 @CamoGeko
@Funk Wizard

Flashing Instructions moved to OP and now maintained by official Maintainers !
Thread Contributors:
@shadowstep
 @CamoGeko
@Funk Wizard

Funk Wizard said:
Reserved for Downloads
Uploading the zip...
Click to expand...
Click to collapse
Hey buddy,
Appreciate you're busy with this and there will be installation instructions as well but was wondering if this will be flashable over 4.5.1 stock ROM witu ElementalX kernel installed or if we will have to revert back to full stock and update that way?
Sorry, first time one OnePlus and each manufacturer / ROM scene has a slightly different way of approaching things.
Sent from my OnePlus5 using XDA Labs

Just got my OTA update ^^

Me too. No noticeable differences I can see, e.g. my 5Ghz WLAN ist still 3 times slower than my 2.4GHz one.

rav101 said:
Hey buddy,
Appreciate you're busy with this and there will be installation instructions as well but was wondering if this will be flashable over 4.5.1 stock ROM witu ElementalX kernel installed or if we will have to revert back to full stock and update that way?
Sorry, first time one OnePlus and each manufacturer / ROM scene has a slightly different way of approaching things.
Sent from my OnePlus5 using XDA Labs
Click to expand...
Click to collapse
Hey buddy, it will be a flashable zip, i am trying to upload full zip which will be a TWRP flashable zip as i am also a rooted user. You don't need to go back to stock as it will be a dirty flash
All you do is download the full zip
Reboot to TWRP
Wipe Dalvik & Cache
Flash the Full Zip
Flash Magisk or SuperSU for root
Flash Kernel (Optional)
Reboot System
You would have a working 4.5.2 OS running again with TWRP and EX :highfive:

Funk Wizard said:
Hey buddy, it will be a flashable zip, i am trying to upload full zip which will be a TWRP flashable zip as i am also a rooted user. You don't need to go back to stock as it will be a dirty flash
All you do is download the full zip
Reboot to TWRP
Wipe Dalvik & Cache
Flash the Full Zip
Flash Magisk or SuperSU for root
Flash Kernel (Optional)
Reboot System
You would have a working 4.5.2 OS running again with TWRP and EX :highfive:
Click to expand...
Click to collapse
Awesome,
Not new to flashing but always great to have a guide on a new device. I always try and read twice before flashing once. And back up always, especially in the early days of a device.
Quick question though: would you not need to flash kernel (optional) before root because wouldn't the root zip modify boot.img?
Sent from my OnePlus5 using XDA Labs

Please fix the jitter stutter lag while scrolling

rav101 said:
Awesome,
Not new to flashing but always great to have a guide on a new device. I always try and read twice before flashing once. And back up always, especially in the early days of a device.
Quick question though: would you not need to flash kernel (optional) before root because wouldn't the root zip modify boot.img?
Sent from my OnePlus5 using XDA Labs
Click to expand...
Click to collapse
Ideally you are right but this is what i generally follow and it has worked for me.
If you don't mind an extra reboot i recommend just dirty flash the rom and Magisk first and boot into OS, there on you can reboot into recovery and flash the kernel.
Flashing kernel before Magisk gave me problems in the past on the 3T when i used bluspark , as this is the new device and only EX is out yet, please check with @flar2 if he recommends flashing the kernel before the root or after.
If anything goes wrong now we have the full zip so dirty flash and all fine :laugh:

I wouldn't flash the kernel after this update cos EX will most likely come out with a newer version reflecting the new source. Just noticed this thread, I'm actually uploading the 4.5.2 full zip myself lol, just to help people who get into trouble rooting/TWRP'ing/etc

djsubterrain said:
I wouldn't flash the kernel after this update cos EX will most likely come out with a newer version reflecting the new source.
Click to expand...
Click to collapse
+1

Funk Wizard said:
Ideally you are right but this is what i generally follow and it has worked for me.
If you don't mind an extra reboot i recommend just dirty flash the rom and Magisk first and boot into OS, there on you can reboot into recovery and flash the kernel.
Flashing kernel before Magisk gave me problems in the past on the 3T when i used bluspark , as this is the new device and only EX is out yet, please check with @flar2 if he recommends flashing the kernel before the root or after.
If anything goes wrong now we have the full zip so dirty flash and all fine :laugh:
Click to expand...
Click to collapse
Yes indeed,
I've seen some ROMs / kernels in the past require a full reboot before coming and installing other things and in the grand scheme of things safe is sorry for the sake of a 1 minute reboot process. Thanks for your hard work. Can't wait for the download link to be supplied.
Sent from my OnePlus5 using XDA Labs

OxygenOS 4.5.2 full zip: http://otafsg.h2os.com/patch/amazone2/GLO/OnePlus5Oxygen/OnePlus5Oxygen_23.O.06_GLO_006_1706241458/OnePlus5Oxygen_23_OTA_006_all_1706241458_e550.zip

epizza said:
OxygenOS 4.5.2 full zip: http://otafsg.h2os.com/patch/amazone2/GLO/OnePlus5Oxygen/OnePlus5Oxygen_23.O.06_GLO_006_1706241458/OnePlus5Oxygen_23_OTA_006_all_1706241458_e550.zip
Click to expand...
Click to collapse
So this is official/clean/newest firmware for OP5 straight from OnePlus?

epizza said:
OxygenOS 4.5.2 full zip: http://otafsg.h2os.com/patch/amazone2/GLO/OnePlus5Oxygen/OnePlus5Oxygen_23.O.06_GLO_006_1706241458/OnePlus5Oxygen_23_OTA_006_all_1706241458_e550.zip
Click to expand...
Click to collapse
Many Thanks Buddy, i shall update the OP with this till i get the Drive Mirror :highfive:
KamilKiri said:
So this is official/clean/newest firmware for OP5 straight from OnePlus?
Click to expand...
Click to collapse
Yes it is :good:

_DELETED_ (wrong thread)

Meanwhile AFH Mirror | Credits @djsubterrain
https://www.androidfilehost.com/?fid=889764386195911431

I initiated update by going to Settings/System Updates, Check for Updates, which showed 4.5.2 available, then selecting Update Now.

Funk Wizard said:
Many Thanks Buddy, i shall update the OP with this till i get the Drive Mirror :highfive:
Yes it is :good:
Click to expand...
Click to collapse
Do u think we can just unSU or uninstall magisk to proceed to OTA instead of downloading the whole rom? Nothing was done to system anyway.
Edit: Forgot I have flashed twrp...anyway, 1.5gb downloaded