TEMASEK CM13.0
Hybrid ROM
Features cherry-picked from crDroid, SlimRoms, OmniROM, LiquidSmooth, NamelessROM and more.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Description:
Temasek ROM is one of best ROMs out there.
It has all required features you would like to have with stability of CM base.
Features
Marshmallow 6.0.1
Ambient Display
Floating Windows
Statusbar Customizations
Clock Alignment
Battery Settings
Charging animations
Dotted circle battery settings
Battery colours
Battery bar
Statusbar greeting
Network Traffic
Statusbar Brightness control
Breathing Notifications
Quick Pull down
Smart Pull down
Quick Settings Management
DPI Settings
Live Display
Ambient Display
Doze
Smart cover options
Lockscreen weather
Lockscreen colours
Middle and bottom shortcuts
Button Settings
Navigationbar customization
Slim PIE
Gesture Anywhere
TRDS
Navigationring Targets
Animation Controls
Slim Recents
Omni Switch
Recents RAM Bar
HeadsUP Settings
App circle sidebar
Apps sidebar
Smart Control
many many more....
What works ?
Audio
Wifi
Bluetooth
Camera
RIL
GPS
Fingerprint
What doesn't ?
you tell me
Downloads:
Latest Build
For flashing the latest build which is based on M firmware checkout the guide here
Just a request to users :
Please don't mirror the ROM anywhere.Also avoid posting the direct download link in comments. Please use the download link I have put up in the OP.
Requirements to flash :
You need to have a unlocked bootloader to flash this in case anyone is going to flash
You need to have TWRP installed after that
You also need to wipe data
XDA:DevDB Information
temasek, ROM for the Xiaomi Redmi Note 3
Contributors
Siddhesh.K15
Source Code: https://github.com/sandymanu/android_kernel_xiaomi_kenzo
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Created 2016-06-10
Last Updated 2016-06-10
reserved
Gonna try soon!
Wow... new rom to flash! Can i flash this ROM on locked bootloader with Twrp Alka (my current ROM is Santhosh M' rom)? http://forum.xda-developers.com/redmi-note-3/development/rom-cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Thank you!
wyhu said:
Wow... new rom to flash! Can i flash this ROM on locked bootloader with Twrp Alka (my current ROM is Santhosh M' rom)? http://forum.xda-developers.com/red...cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Thank you!
Click to expand...
Click to collapse
Maybe
Could you please build a pure aosp ROM, don't know for some reason all roms in our section are based on CM13.
There will be many who are waiting for that. Thank You.
Sent from my Redmi Note 3 using XDA-Developers mobile app
sheshuvadrevu said:
Could you please build a pure aosp ROM, don't know for some reason all roms in our section are based on CM13.
There will be many who are waiting for that. Thank You.
Sent from my Redmi Note 3 using XDA-Developers mobile app
Click to expand...
Click to collapse
Before MIUI 8 is released nothing will happen
Try it or die said:
Before MIUI 8 is released nothing will happen
Click to expand...
Click to collapse
How could these many cm13 roms are possible and more over we do not even have source built 5.1. And with the same 5.1 kernel sources we are able to build CM13, why not AOSP. Could someone please shed some light on it.
Sent from my Redmi Note 3 using XDA-Developers mobile app
sheshuvadrevu said:
How could these many cm13 roms are possible and more over we do not even have source built 5.1. And with the same 5.1 kernel sources we are able to build CM13, why not AOSP. Could someone please shed some light on it.
Sent from my Redmi Note 3 using XDA-Developers mobile app
Click to expand...
Click to collapse
there are many sources available. there are official cm13 sources, santhosh_m sources, chinese cm13 rom sources. Many of the roms (or all) with working fp are taking the kernel which is based on the leaked miui mm rom, so they arent building the kernel from source. there are a few roms out there which contains a kernel, which is builded from source. they are using the official cm13 source afaik. because of this things like fp doesnt work. we havent got any source for aosp, even the aosp 5.1 rom is a modified leaked rom.
nexuspur said:
there are many sources available. there are official cm13 sources, santhosh_m sources, chinese cm13 rom sources. Many of the roms (or all) with working fp are taking the kernel which is based on the leaked miui mm rom, so they arent building the kernel from source. there are a few roms out there which contains a kernel, which is builded from source. they are using the official cm13 source afaik. because of this things like fp doesnt work. we havent got any source for aosp, even the aosp 5.1 rom is a modified leaked rom.
Click to expand...
Click to collapse
Sorry bro, I don't get one point, we don't have source for AOSP? , AOSP is the sources released by Google for their updates right, so the 5.1 sources should already be available and xiaomi released kernel sources for 5.1, so shouldn't we be able to BUILD atleast an AOSP version for 5.1. Sorry if I am wrong.
Sent from my Redmi Note 3 using XDA-Developers mobile app
wyhu said:
Wow... new rom to flash! Can i flash this ROM on locked bootloader with Twrp Alka (my current ROM is Santhosh M' rom)? http://forum.xda-developers.com/red...cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Thank you!
Click to expand...
Click to collapse
Yaa. U can just clean flash it
Sent from my Redmi Note 3 using XDA-Developers mobile app
Temasek's builds are known to be quite optimized , could you please try to build an expérimental build with some 5.x or 6.x toolchain ( a lil' preference for ubertc, really want to see how it does the job on arm64)
Edit: also take a look on jgcaap's commits and source for n5x here i already tried some of his commits and optimized libraries when i used to build for the s3 and it was quite effective, we need some optimiser-hero for our device too ?
sheshuvadrevu said:
Sorry bro, I don't get one point, we don't have source for AOSP? , AOSP is the sources released by Google for their updates right, so the 5.1 sources should already be available and xiaomi released kernel sources for 5.1, so shouldn't we be able to BUILD atleast an AOSP version for 5.1. Sorry if I am wrong.
Sent from my Redmi Note 3 using XDA-Developers mobile app
Click to expand...
Click to collapse
I'm not a dev, but i think it should be "theoretically" be possible.
com.android phone stoped working please help
Ios
Plz make an IOS rom for redmi note 3 sd
deepsingh237 said:
Plz make an IOS rom for redmi note 3 sd
Click to expand...
Click to collapse
if you want a iOS rom install MIUI
deepsingh237 said:
Plz make an IOS rom for redmi note 3 sd
Click to expand...
Click to collapse
This guy loves to troll. Been requesting insane features in some thread.
justinxfan said:
if you want a iOS rom install MIUI
Click to expand...
Click to collapse
Sent from my Redmi Note 3 using XDA-Developers mobile app
Bro is there any rom for permanent fixed wcdma only option in redmi note 3
Excellent ROM dear!!
It is fluid, smooth, everything is working, battery consumption is good (still under test)...
Bit I think vibration strength is very high. Un another ROMs, u can change this un settings, but I didn't find that con this one... Any help?
And where can I change the location of the clean all button of multitasking?
Regards!!
Hi, guys,
I'm a Redmi 1s owner. I want to buy this phone. But before that, I want ask e few (stupid) questions.
1. Can I flash TWRP directly on a rooted RN3 Pro?
2. After that, can I flash this ROM on the RN3 Pro?
3. Or I must unlock the bootloader first?
Thanks.
(PS. I use Temasek's 12.1 ROM on my current phone, it's very good.)
Related
I am not responsible for bricked devices, dead SD cards, explosions, thermonuclear war, or you getting fired because the alarm application failed, Please read the thread carefully before deciding to flash this rom. Flash this on your own risk.
SlimRoms is a custom android operating system. Our main goal is to offer users a slimmed down yet feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by our public Gerrit to submit patches of any type.
Slim6 is the project name for SlimRoms based on Android 6.0.1 Marshmallow and offers the following original features:
Slim6 is still in its early stages of development so if your favourite feature is not back yet, don’t worry more will be added with later releases.
SlimLauncher
An Open source, feature filled launcher! -More fun than you can shake a stick at.
Important links:
slimroms.org - Our official website and your source for anything SlimRoms related.
FAQ - Have a question? Consider reading our FAQ first, you might find your answer there!.
Report-bugs - Found a bug? Send it our way!
Kernel Source - The source of your device's kernel.
Get in touch!
- You can contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Disclaimer: We are not responsible for any damages to your device.
Flashing instructions:
Download slim rom zip to your sdcard
Backup all your partitions
Flash slim and gapps
Downloads:
Slim For Kenzo 21/11/2016
XDA:DevDB Information
Slim For Kenzo, ROM for the Xiaomi Redmi Note 3
Contributors
Umang96
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Stable
Created 2016-07-17
Last Updated 2016-11-21
Reserved
Reserved
Thanks for the rom.Had used slim rom a lot on 1+1. Will flash it sometime and see
Slim rom for our device. Hurray. Will have to try...I am on MIUI 8( have to spend little time on it too). Slim roms are considered to be best. Its a hit among Redmi 1s users too.
2 questions: Does it use stock or radon kernel and why RN3 Pro is not listed on the official slim site?
Was about to release the rom
MY Build
https://www.androidfilehost.com/?fid=24591000424947932
white FANNg said:
2 questions: Does it use stock or radon kernel and why RN3 Pro is not listed on the official slim site?
Click to expand...
Click to collapse
Radon
manhar2108 said:
Was about to release the rom
MY Build
https://www.androidfilehost.com/?fid=24591000424947932
Click to expand...
Click to collapse
I didn't knew you were working on slim too
Hi,
Cannot thank you enough.
Question: You say we need to flash CM-Radios.zip. But I was on the Global Build of Miui 8 (6.7.14),, delivered from the guys at Xiaomi.eu and flashed just the ROM and GApps and everything seems to be working fine.
Why is the radio.zip needed? I'll continue to test to check if everything is working right.
I'm soooooooooo happy for this build, you have no idea. Coming from an 1+1 I'm used to flash often
THANK YOU SO MUCH, you're the man.
Regards,
- aurocha
---------- Post added at 01:55 PM ---------- Previous post was at 01:54 PM ----------
Umang96 said:
Stock
I didn't knew you were working on slim too
Click to expand...
Click to collapse
Wow! Thanks to both of you.
Any of you guy thinking on building PA (AOSPA, Paranoid Android?)
Or even Exodus?
Regards,
- aurocha
Wow! Thanks to both of you.
Any of you guy thinking on building PA (AOSPA, Paranoid Android?)
Or even Exodus
Regards,
- aurocha
Click to expand...
Click to collapse
Can you please not quote whole OP ?
Exodus was my favorite and it's closed source
Umang96 said:
Can you please not quote whole OP ?
Exodus was my favorite and it's closed source
Click to expand...
Click to collapse
You're right, sorry, just edited the post.
manhar2108 said:
Was about to release the rom
MY Build
https://www.androidfilehost.com/?fid=24591000424947932
Click to expand...
Click to collapse
Any description?
Can you put your kernel (Radon) this firmware?
DowL_HH4 said:
Can you put your kernel (Radon) this firmware?
Click to expand...
Click to collapse
I can but you can flash radon externally, so whats the problem ?
Umang96 said:
I can but you can flash radon externally, so whats the problem ?
Click to expand...
Click to collapse
Sorry for my English, not translated. I ask: can we do it?
Any screen shots pls
Sent from my Redmi Note 3 using XDA-Developers mobile app
This rom, really clear AOSP or based Cyanogen Mod? and rom support Quick charge?
Umang96 said:
Must be on cm13 compatible radios
Click to expand...
Click to collapse
What u mean by that ? That is only if I am coming from miui or ?
marko94 said:
What u mean by that ? That is only if I am coming from miui or ?
Click to expand...
Click to collapse
People get problems like fingerprint not working and settings fc if they don't flash radios.
Can you add Vo-LTE support for this ? Jio SIMs are literally available to almost anyone now. Thanks. Also is it possible to create a Telegram group where you can announce updates to Radon Kernel as well as Slim ROM ?
/** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM/KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point your finger at me for messing up your device, I will laugh at you.
* BOOM! goes the dynamite
*/
Hi XDA community, we are proud to present our vision of CyanogenMod with features that we think are useful. Hope you enjoy our builds as much as we do.
The main goal of Nuclear Team is to provide a clean and fast ROM with nice and useful features.
[ ROM ] [ MARSHMALLOW ] [ 6.0.1] NucleaRom [ V1.1.2]
By NuclearTeam
# Features:
Based on CyanogenMod 13
Android 6.0.1_r52
Compiled with Uber 4.9 toolchain
Nuclear Settings
Customizable status bar (clock position, date, network indicators, battery style...)
Gestures Anywhere
Exclusive Nuclear Boot
Switch from 1 column Setting to 2 column
Switch To Hide SuperSu from Status Bar
Lockscreen quick unlock
Network traffic indicator
Show name of apps when optimizing at boot
All cm goodies
Bugs: You tell
CHANGELOG: V1.1.2
Sync cm13
update r52
update bootanimation
fix minor bugs and improvements
Kenzo NucleaROM's BUILD's
Builds are updated regularly Keep Checking Latest Builds
GApps ARM64
# How to install:
- Use twrp for best experience and compatibility
- Make a nandroid backup (optional but always recommended)
- Download ROM
- Download UPDATED GApps
- Wipe system,data,cache,dalvik
- Flash ROM
- Flash GApps
- Reboot
(There's no need to flash SuperSU)
Updating:
Flash latest firmware (if any)
Flash ROM
Have fun....
Remember Me in your Prayers
Special thanks to:
CyanogenMod
Grarak
JoaoPaulo
Lord Boeffla
Temasek
Ak
OrdenKrieger
ResurrectionRemix
XDA
HTCmania
Nuclear Team & testers
And a very special thanks to TugaPower
Anyone I might have forgotten (please let me know)
XDA:DevDB Information
NucleaROM , ROM for the Xiaomi Redmi Note 3
Contributors
cyberboy_sj, cyberboy_sj
Source Code: github.com/oneromone
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Testing
Current Beta Version: 1.1.2
Beta Release Date: 2016-07-19
Created 2016-07-19
Last Updated 2016-07-20
Reserved
Here you go
Screen shots please.. That will be helpful
Sent from my Redmi Note 3 using XDA-Developers mobile app
Is that weird noise in earphones fixed?
Hope to see more new roms from your side... Thnx for this one...
Hi!
Love your Beanstalk rom too, i will try it soon. Thx
Quick charge supported?
Nice another ROM.I hope you don't leave beanstalk behind lol
Sent from my Redmi Note 3 using Tapatalk
Molniya said:
Quick charge supported?
Click to expand...
Click to collapse
yes
cyberboy_sj said:
yes
Click to expand...
Click to collapse
Quick Charge 2.0..??
sumitvib said:
Quick Charge 2.0..??
Click to expand...
Click to collapse
Ofcourse Buddy ! qc3.0 will melt your device
cyberboy_sj said:
Ofcourse Buddy ! qc3.0 will melt your device
Click to expand...
Click to collapse
Really? Is there any way to enable on any otherwise rom?
KokoReyes said:
Really? Is there any way to enable on any otherwise rom?
Click to expand...
Click to collapse
It will Burn your device Man :silly: Enjoy qc2.0 with peace
Im gonna try and report back, Thanks
Oh and if I change Kernel, qc 2.0 still working?
@cyberboy_sj Thanx for the ROM.
I have a question. You are working on beanstalk ROM right. Then why are you working on this new ROM.? I think it's better that the devs work on a single ROM and make it bug free instead of working on multiple ROMs which have bugs. Please work on one ROM and make it bug free. Redmi note 3 doesn't have a proper custom ROM which is completely bug free.
another great rom
btw next build please, add power menu and sound tile,it's very usefull :good:
hey i am on miui 7.1.8 rom with bootloader unlock(Un officially), twrp v2 install and rooted rom.
so my quesion is
can i flash this rom directly with TWRP?
or
flash this rom and flash universal boot.img patcher from this thread
http://forum.xda-developers.com/redmi-note-3/how-to/modified-twrp-deleting-emmcappsboot-t3371667
one more if second option then should i follow same process for installing further roms (As i am very addicted to test different roms lol)
Suhaas said:
@cyberboy_sj Thanx for the ROM.
I have a question. You are working on beanstalk ROM right. Then why are you working on this new ROM.? I think it's better that the devs work on a single ROM and make it bug free instead of working on multiple ROMs which have bugs. Please work on one ROM and make it bug free. Redmi note 3 doesn't have a proper custom ROM which is completely bug free.
Click to expand...
Click to collapse
The more you work the more you learn and beanstalk is almost bug free man Enjoy!
pankmohan said:
hey i am on miui 7.1.8 rom with bootloader unlock(Un officially), twrp v2 install and rooted rom.
so my quesion is
can i flash this rom directly with TWRP?
or
flash this rom and flash universal boot.img patcher from this thread
http://forum.xda-developers.com/redmi-note-3/how-to/modified-twrp-deleting-emmcappsboot-t3371667
one more if second option then should i follow same process for installing further roms (As i am very addicted to test different roms lol)
Click to expand...
Click to collapse
flash radios.zip from banmeifyouwant thread if you haven't flashed them then unlock your bootloader again and then use alka twrp (I use that) wipe system cache boot and then flash this rom
most of the roms have same procedure if anyone is exception then they must have included in thread READ FLASHING INSTRUCTIONS CAREFULLY
[ROM][UNOFFICIAL][14.1] Lineage OS 14.1 by karevn, razziell and anomalchik. Nosgoth V3+ kernel
Code:
*** This build comes as-is without any support or warranty. Use it at your own risk.
Introduction
We were building this ROM for last 4 months and published it on 4pda.ru since Razziell refused to release his RR build here. Most of the work on this ROM is an unique product of @Razziell, @Anomalchik and @karevn efforts. To this moment, this build is most-popular and top-rated build on 4pda. I hope you'll enjoy it.
Installation instructions
* Install some TWRP
* Download ROM ZIP
* Copy ZIP to internal flash
* Boot to TWRP
* Install ROM
* Install fresh OpenGapps (pico build is recommended)
* Wipe cache/dalvik. Wipe data if you had other ROM before.
* Reboot
Click to expand...
Click to collapse
Download
Download
Click to expand...
Click to collapse
Have bug reports? Want to help a project
We're focused on building a quality ROM, and expect a certain level of commitment if you want to receive help. Please post all the problem reports and feature requests to the issue tracker: http://github.com/karevn/android_device_xiaomi_markw-RR
Changelog
Code:
Current changelog: 2017-01-08
[note] Intelligent CPU boost framework
[note] Re-tuned auto-brightness
[fix] Fixed LED HAL
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* [user=5661526]@Razziell[/user]
* [user=4683469]@Anomalchik[/user]
* @msdx321
* @HighwayStar
* @BratelloSlava
... and other contributors
XDA:DevDB Information
[UNOFFICIAL] Lineage OS 14.1 [karevn, razziell, anomalchik], ROM for the Xiaomi Redmi 4 Prime
Contributors
karevn, razziell, anomalchik
Source Code: http://github.com/karevn/android_device_xiaomi_markw-RR
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2017-12-31
Created 2018-01-08
Last Updated 2018-01-08
I am really sorry for spamming the section with excessive threads, but XDA was extremely laggy
vodo kernel not work
the audio does not work with the kernel vodo
eliasmovil said:
the audio does not work with the kernel vodoo
Click to expand...
Click to collapse
Yes.
I'll post a project roadmap and a kind of "support policy" in a couple of days to set expectations. Basically, all comes to "if you made any modifications - it's your decision and you can't expect any help". It's pretty... spartan-stylish, but after all we're focused on walking the walk, not talking the talk.
@karevn Thanx for your work on this Xiaomi forsaken phone, as well as all the other devs! I'm using the rom since about a week, very stable so far.The only problem i have with latest build is some "click" sounds when i'm talking on whatsapp on wifi, didn't test it with data or any other app till now.If anyone else having this problem i'll try getting a logcat, else i'll try a clean install first.
A small request, since it's unofficial, can we have a network monitor on the status bar?It's very useful in general.
And a question, is 2.2 ghz the maximum we can squeeze from this cpu?Can we reach 2.4-2.5 even at the cost of increased power consumption?I'll be happy to help in this direction since i have some experience.
karevn said:
I am really sorry for spamming the section with excessive threads, but XDA was extremely laggy
Click to expand...
Click to collapse
Man you made a mess I had to delete my projects to make you some ROOM! Good to see you here enjoy!
T3sla said:
@karevn Thanx for your work on this Xiaomi forsaken phone, as well as all the other devs! I'm using the rom since about a week, very stable so far.The only problem i have with latest build is some "click" sounds when i'm talking on whatsapp on wifi, didn't test it with data or any other app till now.If anyone else having this problem i'll try getting a logcat, else i'll try a clean install first.
A small request, since it's unofficial, can we have a network monitor on the status bar?It's very useful in general.
And a question, is 2.2 ghz the maximum we can squeeze from this cpu?Can we reach 2.4-2.5 even at the cost of increased power consumption?I'll be happy to help in this direction since i have some experience.
Click to expand...
Click to collapse
The main goal of this project is to provide a stable usable rom with smooth performance. So, I'll never integrate any bells, whistles or serious overclocking/undervolting. Snapdragon 625 is good as it is - fast and power-efficient with careful configuration.
On the WhatsApp thing - check if the is WhatsApp-specific or system-wide. If it's system-wide - post an issue at my github tracker.
Using your Rom for months now,
No major issues,
Happy you are here. :good::good:
eliasmovil said:
the audio does not work with the kernel vodo
Click to expand...
Click to collapse
Flash audio fix kernel. Thanks goes to @karevn
Karevn (and Razziell, and Anomalchik and others) THANKS ALOT for all your efforts!
I'm using your ROM since November if i remember correctly, and it is fantastic!
I'm even reading 4pda thread (translated by google) just to check your messages, updates and whatsoever!
This rom is fantastic, but i have to tune a bit because on MY Redmi (not on others, since i did not read anyting related in xda nor 4pda) i have spontaneous reboot.
I'm mitigating them using "interactive" CPU so i get about 1 reboot a day "only" (i even tryed to use only 3g or 4g). With impulse i have many reboots
With Voodoo Kernel i have no reboots. It seems some tweaks you did, don't work very well with just my own device
However with one of your rom/kernel it was all perfect (it was the one you gave us just without hotplug, about 2 months ago).
I know you are asking for logs, but it is just my device who has such problems, so i will not ask you to check just for me
Keep up the GREAT work and thanks alot!
karevn said:
[ROM][UNOFFICIAL][14.1] Lineage OS 14.1 by karevn, razziell and anomalchik. Nosgoth V3+ kernel
Introduction
We were building this ROM for last 4 months and published it on 4pda.ru since Razziell refused to release his RR build here. Most of the work on this ROM is an unique product of @Razziell, @Anomalchik and @karevn efforts. To this moment, this build is most-popular and top-rated build on 4pda. I hope you'll enjoy it.
Installation instructions
Download
Have bug reports? Want to help a project
We're focused on building a quality ROM, and expect a certain level of commitment if you want to receive help. Please post all the problem reports and feature requests to the issue tracker: http://github.com/karevn/android_device_xiaomi_markw-RR
Changelog
Thanks To/Credits
XDA:DevDB Information
[UNOFFICIAL] Lineage OS 14.1 [karevn, razziell, anomalchik], ROM for the Xiaomi Redmi 4 Prime
Contributors
karevn, razziell, anomalchik
Source Code:http://github.com/karevn/android_device_xiaomi_markw-RR
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2017-12-31
Created 2018-01-08
Last Updated 2018-01-08
Click to expand...
Click to collapse
how do i use Default System icon like RR in Lineage Os ??
ex : RR have Rounded Icon.Youtube Icon is equipped with white bordered whereas Lineage have just the Red YouTube icon. it contains no white bordered icon..
Emon330 said:
how do i use Default System icon like RR in Lineage Os ??
ex : RR have Rounded Icon.Youtube Icon is equipped with white bordered whereas Lineage have just the Red YouTube icon. it contains no white bordered icon..
Click to expand...
Click to collapse
It's the stock icon, without rounded edges.
Use Pixel Launcher for Pixel Icons
Sent from my Mi A1 using XDA Labs
Any of you need any translations or proofreading, just in case? I'm a frequent visitor on xda and an occasional visitor of 4pda and fluent in both languages. Would be glad to help.
Using this ROM right now, extremely stable, battery life is probably the best I've seen on markw - 12 hours later I still have over 50% and that's with a lot of usage including videos and music, OTAs actually work (are they pulled from the google drive? I'm just curious how someone managed to make it work on an UNofficial ROM, it's amazing) albeit only on the next day after the installation, only had one app crash a few times and I probably know the cause. Very smooth, LED works fine, no longer randomly reboots on low 2G signal or at all. No bloat or random apps I just don't use that other ROM devs force in there (some launcher - I either use the google one or Trebuchet, Substratum - I don't even use it at all, I much prefer the stock look, Xposed - If I really want/need it I'll rather install it myself). Generally very pleased to actually get rid of MIUI AND also have a fully functioning device running a ROM that doesn't need 10 fixes and a kernel flashed afterwards.
Thanks a lot for the efforts.
Big thanks for this Rom is the best what i have use! But i have onley one Problem. The LED dont works for any App. But wen i Charge my Phone IT works. I have Do a clean wipe install. Is there anywhat wat i can Do?
Gesendet von meinem Redmi 4 Prime mit Tapatalk
cheremenin said:
Any of you need any translations or proofreading, just in case? I'm a frequent visitor on xda and an occasional visitor of 4pda and fluent in both languages. Would be glad to help.
Using this ROM right now, extremely stable, battery life is probably the best I've seen on markw - 12 hours later I still have over 50% and that's with a lot of usage including videos and music, OTAs actually work (are they pulled from the google drive? I'm just curious how someone managed to make it work on an UNofficial ROM, it's amazing) albeit only on the next day after the installation, only had one app crash a few times and I probably know the cause. Very smooth, LED works fine, no longer randomly reboots on low 2G signal or at all. No bloat or random apps I just don't use that other ROM devs force in there (some launcher - I either use the google one or Trebuchet, Substratum - I don't even use it at all, I much prefer the stock look, Xposed - If I really want/need it I'll rather install it myself). Generally very pleased to actually get rid of MIUI AND also have a fully functioning device running a ROM that doesn't need 10 fixes and a kernel flashed afterwards.
Thanks a lot for the efforts.
Click to expand...
Click to collapse
Your help with English translations / proofreading is highly welcome! Please contact me on Telegram.
N1ck474 said:
It's the stock icon, without rounded edges.
Use Pixel Launcher for Pixel Icons
Click to expand...
Click to collapse
i use nova launcher & Rounded Edge is available on RR but Lineage hasn't . i want to turn Round Edge from Default in Lineage .
so, What Should i do ? any patches here ?
Emon330 said:
i use nova launcher & Rounded Edge is available on RR but Lineage hasn't . i want to turn Round Edge from Default in Lineage .
so, What Should i do ? any patches here ?
Click to expand...
Click to collapse
Use an icon pack with Nova.
Try this:
https://play.google.com/store/apps/details?id=com.themezilla.pixelui
Sent from my Mi A1 using XDA Labs
Is this one a good rom?
I looked on 4pda, but that looks like all russian.. don't understand at all.
Now im on the last xiaomi.eu built based on miui 9 , but MM, but i was looking to jump to nougat.
I had the aicp, and the RR, but between the few bugs of then, to me the worst has the lost of network cover.
How this version work? And agaisnt over Los built here, what have diferent?
Thanks
vrumvrum said:
Is this one a good rom?
I looked on 4pda, but that looks like all russian.. don't understand at all.
Now im on the last xiaomi.eu built based on miui 9 , but MM, but i was looking to jump to nougat.
I had the aicp, and the RR, but between the few bugs of then, to me the worst has the lost of network cover.
How this version work? And agaisnt over Los built here, what have diferent?
Thanks
Click to expand...
Click to collapse
This ROM is basically the base of all Nougat ROMs for Redmi 4 Prime...so if you're looking for the most stable for daily use, this is IT
DISCONTINUED
As development from DND Team seems to have been stopped, building on that sources will be suspended.
DarkNess reDefined
'We work in darkness to serve the light!'
DarkNess reDefined
redefining the darkness in you !
originally brought to you by:
[url]https://team-darkness.tk/[/URL]
Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I just wanted to share some work i did with the help of many talented developers to show the J3 (2016) is still good enough to run latest OS'es.
I don't want to build DND on a regular base nor will i reply to any questions for ETA's.
I mainly build this ROM for my own use and Danijel just encouraged me to share.
I will try to release a build weekly as long as time lets me to.
You might all download and test the builds and decide on which ROM to stay.
How to flash:
Download the ROM and Gapps
Boot into recovery mode
Wipe System/Data/Dalvik Cache/Cache
Flash ROM and Gapps zip file
Reboot and enjoy the power of Darkness !
DND is based on following sources:
LineageOS (Base)
Resurrection Remix (RR)
Slim Roms Team
ParanoidAndroid Team
DU Team
AICP
AOKP
Credits for DND goto:
@AKabhishek
@DarkKnight6499
@kishpatel
@warlord_rk
@TheDarkStrix
Credits for porting ROM goto:
[email protected] - Thanks for your help building LineageOS and porting to DND
PixelBoot - Thanks for your help for bulding LineageOS
faltisal
djeman
Downloads:
DND Build from 2018-01-13
DND Build from 2018-01-19 (untested due to lack of time/ use at own risk)
DND Build from 2018-02-07 (untested due to lack of time/ use at own risk)
DND Build from 2018-02-16
1st post
[reserved]
Navigation bar with disabled hardware keys option .......available?
First one that made a rom thats not from team Lineage OS development team. Coungrats!
Selvakmr123 said:
Navigation bar with disabled hardware keys option .......available?
Click to expand...
Click to collapse
maybe you mean that... look at attached screenshot...
borksek said:
First one that made a rom thats not from team Lineage OS development team. Coungrats!
Click to expand...
Click to collapse
To be honest it's originally LineageOS-based ROM... and 99% credits goes to Danijel
I like this rom whether the status of this rom is stable or beta? Whether this rom has any bug?
phoenix_wnd said:
maybe you mean that... look at attached screenshot...
Click to expand...
Click to collapse
Yup....:good:
Disable all hardware keys while using navigation bar option available ??? Like in RR 7.1.X ROM
Some ROMs have config_useRoundIcon enabled in framework_res and also other icons, i don't like pixel white round icon.
Can I request next update to disable this?
Is this supports volte
Selvakmr123 said:
Yup....:good:
Disable all hardware keys while using navigation bar option available ??? Like in RR 7.1.X ROM
Click to expand...
Click to collapse
so I guess so... although I don't play too much around with that feature...
ntrimurthulu said:
Is this supports volte
Click to expand...
Click to collapse
I can't test that because I don't have a SIM inserted... J3 is not my daily driver... so maybe someone else could test and report?
LINGGV said:
I like this rom whether the status of this rom is stable or beta? Whether this rom has any bug?
Click to expand...
Click to collapse
Although it's LineageOS-based I'd rather say it's more like beta... I use it on a test device so no prob for me... Didn't encounter bugs so far, but hard to say... I encourage everyone to report bugs... but: I'm not a developer and will straight build on newest sources... no support like developing from me...
phoenix_wnd said:
so I guess so... although I don't play too much around with that feature...
Click to expand...
Click to collapse
How is battery life.... can be expected as stock ROM?
Which kernel can be used ?
This ROM or Aurora kernel...
Please make a volte patch for this rom
ntrimurthulu said:
please make a volte patch for this rom
Click to expand...
Click to collapse
we said!! Sooo many timmes!! It is not possible on custom roms for j3! Because of spreadtrum proprietary code!!!!
It is possible for stock roms, but it is hard!!!
Is this stable wi fi is working corectly not like linageos 14.1 or RR 7.1.2 sim signal
It need to be stable
TBESTSMARTDROID said:
Is this stable wi fi is working corectly not like linageos 14.1 or RR 7.1.2 sim signal
It need to be stable
Click to expand...
Click to collapse
Uhm, do you mean wifi-signal or mobile-signal via SIM? As I mentioned before I don't have a possibility to test mobile signal as I don't have another SIM card; but wifi signal is working correctly.
what are the compatibile devices?
phoenix_wnd said:
Uhm, do you mean wifi-signal or mobile-signal via SIM? As I mentioned before I don't have a possibility to test mobile signal as I don't have another SIM card; but wifi signal is working correctly.
Click to expand...
Click to collapse
Which theme engine are you using in this ROM ?
Substratum or Darkness refined
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Introduction
Resurrection Remix the ROM has been based on CM,slim.omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to, the CM team, Lineage, DU, AICP, OMNI team, SLIMROMS and of course to all the supporters.
Note
BRE5 Vendor NEEDED
This ROM is for Exynos variant only. It won't work on you SD variant device.
I change the default screen density to 560 (for S9). If you feel things are too small, manually change it to 600 or 640.
What's working
Everything works on the official Lineage build.
What's not working
Everything doesn't work on the official Lineage build.
Instructions
Install the TWRP and make sure it's fully functional
Download the build and flash it through TWRP
Install the Gapps and addOnSU if you want
Downloads
ROM (S9): http://downloads.resurrectionremix.com/starlte/
ROM (S9+): http://downloads.resurrectionremix.com/star2lte/
Gapps: https://wiki.lineageos.org/gapps.html
AddOnSU: https://download.lineageos.org/extras
Sources
Kernel: https://github.com/msdx321/android_kernel_samsung_starlte
Device Tree (starlte): https://github.com/msdx321/android_device_samsung_starlte
Device Tree (star2lte): https://github.com/msdx321/android_device_samsung_starlte
Device Tree (star-common): https://github.com/msdx321/android_device_samsung_star-common
Chaneglog
Check in RR OTA app
https://github.com/msdx321/RR-OTA/
Reporting Bugs
Open an issue on my GitHub repo
PM me on Telegram (if you can find me, I got no username LOL)
Join this TG Group
Or this TG Group (This one is a more generally S9/S9+ AOSP-like ROM group)
Donation
PayPal
Credit
jesec This Rom is based on the device tree/kernel source he made for Lineage
farovitus Helping me bring kernel up to the latest linux-stable version
XDA:DevDB Information
ResurrectionRemix, ROM for the Samsung Galaxy S9
Contributors
msdx321, jesec, farovitus
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Based On: Lineage
Version Information
Status: Stable
Current Stable Version: RR-O-v6.0.0-20180601
Stable Release Date: 2018-06-01
Created 2018-04-27
Last Updated 2018-06-02
First. Thanks for the rom. Testing was good so far
that doesnt make sense,, whats working- everything,,whats not working- everything
Not clear at all what is going to work or not so wont be installing until you can fix what is and what is not working.
deano121 said:
that doesnt make sense,, whats working- everything,,whats not working- everything
Not clear at all what is going to work or not so wont be installing until you can fix what is and what is not working.
Click to expand...
Click to collapse
Check lineage thread. Whatever works and doesnt work for that rom will be the same for this rom
Great work.Thanks for your working.
is it possible to add RMM bypass patch to the rom?
When a AOSP rom gets speeds like this all you say is thank you
illuzi0n said:
is it possible to add RMM bypass patch to the rom?
Click to expand...
Click to collapse
AOSP doesn't have those RMM things, so we don't need a bypass patch actually.
msdx321 said:
AOSP doesn't have those RMM things, so we don't need a bypass patch actually.
Click to expand...
Click to collapse
I have the oem unlock issue which i have to wait 7 days for it to appear in dev settings though. This doesnt happen in AOSP?
Is this patch needed for this rom?
https://forum.xda-developers.com/galaxy-s9-plus/how-to/guide-root-s9-oem-fix-t3763974
I'm using this ROM at the moment and SIM Toolkit is not working
I have to use two phones because most of the roms dont support this function.I need this function so I can send money as I am a business person
:good:
CharlieYang0531 said:
好久不见了，居然在这里看到
Click to expand...
Click to collapse
You have to write in english!
CharlieYang0531 said:
好久不见了，居然在这里看到
Click to expand...
Click to collapse
Delete this post.Only English
Sent from my Samsung Galaxy S9+ using XDA Labs
@msdx321 are you going to update RR with new lineageos sources by jesec?
illuzi0n said:
I have the oem unlock issue which i have to wait 7 days for it to appear in dev settings though. This doesnt happen in AOSP?
Is this patch needed for this rom?
https://forum.xda-developers.com/galaxy-s9-plus/how-to/guide-root-s9-oem-fix-t3763974
Click to expand...
Click to collapse
Nope, flashing any AOSP based rom won't send you to RMM jail (can't save you from jail as well)
Black_Focus_X said:
@msdx321 are you going to update RR with new lineageos sources by jesec?
Click to expand...
Click to collapse
Sure. Jesec keep changing things those days, it will be a delay in syncing his changes but won't be long (1-3 days)
Can anyone check if wallpaper rotation works on this ROM? Does not on stock...
Thanks m8!
You guys can’t imagine how long I’ve been waiting for this day. That’s one hell of a benefit google gave us there with treble. Can’t imagine that this would have been possible that soon otherwise.
Anyhow, there are a few quirks I’ve noticed (of course, no logcat):
- Power off leads to a reboot
- Enhanced reboot menu isn’t working, just reboots
- su appears to be working adb wise, but apps granted don’t work (f.e. Titanium)
- Magisk (even b16.4) results in a boot loop, guess that’s qwertys beer, not yours
That’s still not holding me from running it as DD from this day.
Does anybody know if it supports turning on the screen or unlocking the phone with the soft touch 3d home button .
batfink1 said:
Does anybody know if it supports turning on the screen or unlocking the phone with the soft touch 3d home button .
Click to expand...
Click to collapse
It does on lineage official so it should on RR