Related
Hello.
So I installed a custom recovery, flashed lollipop fw and installed supersu.
Today I was trying to install Viper4Android but, unfortunately, it does not work.
I also installed the drm restore patch (audio clear + is working).
Is there any fix ? Is Viper working for someone here?
Thanks in advance.
Interested too, have a z3c too and have found a few threads describing the installation in 2 steps, flashing via recovery and installing an .apk but nothing specific for z3c.
will update this thread once I have a full nandroid backup and am ready to play around.
I was in the same situation as you guys and couldn't live without V4A.
You/we forgot 1 step
You need to set SELinux mode to permissive and then install V4A driver:
Use this simple app:
https://play.google.com/store/apps/details?id=com.mrbimc.selinux
Amy more advice? Tried that, then set it back, yet viper doesn't seem to be getting used although the driver is installed, where do I select viper as the processor for audio?
ovizii said:
Amy more advice? Tried that, then set it back, yet viper doesn't seem to be getting used although the driver is installed, where do I select viper as the processor for audio?
Click to expand...
Click to collapse
You don't, I was also looking for that for a while, but PowerAmp picks that up automatically and so I guess the entire OS
Sent from my D5803 using XDA Free mobile app
Dsteppa said:
I was in the same situation as you guys and couldn't live without V4A.
You/we forgot 1 step
You need to set SELinux mode to permissive and then install V4A driver:
Use this simple app:
https://play.google.com/store/apps/details?id=com.mrbimc.selinux
Click to expand...
Click to collapse
any idea what happened that google play store link is no longer valid? shall I chose another one or restore from backup?
ovizii said:
any idea what happened that google play store link is no longer valid? shall I chose another one or restore from backup?
Click to expand...
Click to collapse
Nope, seems like they removed it from the store
I've had a backup with TItaniumBackup but I was just curious what happened there...
Did as Dsteppa sayed. Worked for 10 sec. closed music app and viper and start again. Same thing. Btw I have force enable V4A. Then i went to viper settings and changed FX compatible mode to compatible and restart phone. Works perfectly! Thanks so much!
The solution is disable or froze "Sound Enhancement" app, and that's all, V4A is going to work fine without need of change the option to "Compatible Mode".
iFlasher said:
The solution is disable or froze "Sound Enhancement" app, and that's all, V4A is going to work fine without need of change the option to "Compatible Mode".
Click to expand...
Click to collapse
Thank i try now
MrPingle
Also make sure that Equalizer (in settings, not Viper) is set to Off mode.
I try to install V4A (through Apk) but when i install the drivers, a message says: "Driver install failed: the busybox installation on you device does not work... etc."
I have just installed the last version of busybox in /system/xbin and set Selinux permissive.
How can i resolve it?
I get root with Kingroot e after change binaries to Supersu's binaries.
Hi guys, I could not run Viper4android application on my device (android 6) . I haved installed apk then install driver . But Not thing change in sound effect. I tried to search and did not find out any error?
I need some help to run app with effect sound when play music!
Thank inadvance!
Well mine has problem of installing the sound driver.
通过我的 XT1096 上的 Tapatalk发言
duongnv1996 said:
Hi guys, I could not run Viper4android application on my device (android 6) . I haved installed apk then install driver . But Not thing change in sound effect. I tried to search and did not find out any error?
I need some help to run app with effect sound when play music!
Thank inadvance!
Click to expand...
Click to collapse
How did you install the viper4android via apk or you flashed from recovery?
duongnv1996 said:
Hi guys, I could not run Viper4android application on my device (android 6) . I haved installed apk then install driver . But Not thing change in sound effect. I tried to search and did not find out any error?
I need some help to run app with effect sound when play music!
Thank inadvance!
Click to expand...
Click to collapse
In order to install ViPER4Android, you'll need your system to be properly rooted, BusyBox must be installed, and SELinux Mode must be "Permissive".
I recommend this BusyBox installer, and you can get SELinux Mode Changer from here.
Then, after everything is properly set up, you must also disable your ROM (e.g. CyanogenMod-based ROMs' AudioFX)and/or player (e.g. Poweramp's equalizer)'s built-in equalizer, and switch ViPER4Android's FX Compatible mode from "Normal" to "Compatible".
duongnv1996 said:
Hi guys, I could not run Viper4android application on my device (android 6) . I haved installed apk then install driver . But Not thing change in sound effect. I tried to search and did not find out any error?
I need some help to run app with effect sound when play music!
Thank inadvance!
Click to expand...
Click to collapse
I was able to make V4A work on my Moto X 2014 with a fix.
If you do not have Busybox or permissive SELinux, follow the instructions our mate's posted above:
KazuhiroYasei said:
In order to install ViPER4Android, you'll need your system to be properly rooted, BusyBox must be installed, and SELinux Mode must be "Permissive".
I recommend this BusyBox installer, and you can get SELinux Mode Changer from here.
Then, after everything is properly set up, you must also disable your ROM (e.g. CyanogenMod-based ROMs' AudioFX)and/or player (e.g. Poweramp's equalizer)'s built-in equalizer, and switch ViPER4Android's FX Compatible mode from "Normal" to "Compatible".
Click to expand...
Click to collapse
After Busybox installed and SELinux on permissive, you flash the Viper zip and install the driver. Right after that you open a root enabled file manager and find system>vendor>etc. You'll see an audio_effects.conf.
(I suggest making a safe copy of this file).
Rename the original audio_effects.conf to audio_effects.bak.
Save and reboot. Now try using v4a again.
brunoperissotti said:
I was able to make V4A work on my Moto X 2014 with a fix.
After Busybox installed and SELinux on permissive, you flash the Viper zip and install the driver. Right after that you open a root enabled file manager and find system>vendor>etc. You'll see an audio_effects.conf.
(I suggest making a safe copy of this file).
Rename the original audio_effects.conf to audio_effects.bak.
Save and reboot. Now try using v4a again.
Click to expand...
Click to collapse
Was this procedure required for V4A to work on your Victara? Mine worked in every ROM I tested (all Marshmallow-based) by following the steps you quoted.
KazuhiroYasei said:
Was this procedure required for V4A to work on your Victara? Mine worked in every ROM I tested (all Marshmallow-based) by following the steps you quoted.
Click to expand...
Click to collapse
Yes. I was only able to enjoy v4a after this procedure.
It's worth pointing out that V4A is going to F up your Moto Voice
Popping into this thread real quick to provide some info,
Using compatibility mode with V4A is bad news, causes extra battery drain and problems with some apps.
For every single rom and device I've used 5.0+ I've followed the same procedure to install V4A, without using compatibility mode, without having to delete a file every time, etc.
Flash the "lolliviper" zip attached to this OP.
Followed by the "Build.Prop-Tweaks" and "Soundfix-LibFiles" attached to this post.
You'll also need a way of setting selinux to permissive after every boot if you're using CM or something else with selinux set to enforced. Something like SELinuxModeChanger available here will work.
If you don't have busybox installed, V4A will tell you and help you install it.
The V4A version included in the "lolliviper" zip is not the newest , you'll need to "Check Update" via the 3 dot menu and install the latest apk.
After all this, install the driver via the V4A app, reboot, and you're golden.
Flipz77 said:
It's worth pointing out that V4A is going to F up your Moto Voice
Click to expand...
Click to collapse
Didn't know that. I was only able to set v4a on a custom ROM, so that ship was long gone hahaha
it just stops working?
brunoperissotti said:
Didn't know that. I was only able to set v4a on a custom ROM, so that ship was long gone hahaha
it just stops working?
Click to expand...
Click to collapse
Actually it still "works" because it detects your launch phrase, but after that, half of the time it just hangs without hearing your command. Sometimes it'll randomly work, but it was too much of a botch to keep it that way. I've now resorted to Noozxoide Pro: it's still a system-wide mod with modes for headset, speaker and BT, but it's installed as a "standard" app, it doesn't mess with your system and it sounds boss!
I ran across this link on a similar search on the google machine, and it made V4A installation a breeze. No manual messing with kernel settings and whatnot: http://forum.xda-developers.com/android/software/viperaudio-viperatmos-3-8-sq-driver-t3289075
Battery life has been fine running this for about a week. I don't use Moto Voice so can't comment on that.
THANKS
brunoperissotti said:
I was able to make V4A work on my Moto X 2014 with a fix.
If you do not have Busybox or permissive SELinux, follow the instructions our mate's posted above:
After Busybox installed and SELinux on permissive, you flash the Viper zip and install the driver. Right after that you open a root enabled file manager and find system>vendor>etc. You'll see an audio_effects.conf.
(I suggest making a safe copy of this file).
Rename the original audio_effects.conf to audio_effects.bak.
Save and reboot. Now try using v4a again.
Click to expand...
Click to collapse
Thanks a lot, I was already discouraged, tried several versions of viper, on diferent roms, this was the only solution, but is necessary to remember that for this file to appear in the folder, you need to open the application and save a profile, even if empty, without it you can not find the file audio_effects
If u root ur device using magisk, u can install viper magisk module...it works fine on android 6.0 with selinux enforcing..
Sent from a Motobot
Hi there. Recently got TWRP and rooted this device and installed a bunch of things on it. I installed Busybox and then proceeded to flash Viper|Atmos from here. Rebooted and then it tells me to install driver which I did and then rebooted again. Nothing changed and it still tells me to install drivers. I check the Driver Status and then see that audio format is unsupported. Did a bit of searching around and I saw that I should change SELinux to Permissive from Enforcing. I installed SELinux Mode Changer and gave it root access but it tells me that it cannot detect root. Any ideas? Thanks!
SystemDoctor said:
Hi there. Recently got TWRP and rooted this device and installed a bunch of things on it. I installed Busybox and then proceeded to flash Viper|Atmos from here. Rebooted and then it tells me to install driver which I did and then rebooted again. Nothing changed and it still tells me to install drivers. I check the Driver Status and then see that audio format is unsupported. Did a bit of searching around and I saw that I should change SELinux to Permissive from Enforcing. I installed SELinux Mode Changer and gave it root access but it tells me that it cannot detect root. Any ideas? Thanks!
Click to expand...
Click to collapse
You don't need to set permissive mode for viper anymore, you just need the sepolicy fix.
http://forum.xda-developers.com/showpost.php?p=61242973&postcount=18854
AS OF 03/07/2018
Support and development of this module have been discontinued.
A replacement module can be found here : https://forum.xda-developers.com/apps/magisk/module-magisk-selinux-manager-t3760042
This is a very simple module that installs a post-fs-data.sh script which enables SELinux Permissive Mode. This is useful for certain audio mods and removes the need to understand Magisk's file system & boot logic. No need to create your own scripts, just flash and forget.
I have only tested this on my Verizon HTC 10, but this module is so simple and generic that it should work on any Android device with SELinux.
This module has been tested on and is compatible with Magisk v11.6-15.2.
Disclaimer & Recommendations: This module should be used as a last resort only if appropriate SELinux Permissions can not be generated and injected into the SELinux Policy using selinux-inject, supolicy or magiskpolicy. Putting your device into Permissive Mode will essentially disable all of the operating system level security built into Android and allow any app in any context to do whatever it wants. Actions requiring root access will still trigger your SU Manager App, but all apps have elevated privileges due to permissive and may be able to take malicious actions on your device without needing root access. If you find that this module fixes issues you are experiencing with an app I recommend contacting the app developer and trying to work with them to isolate the necessary SELinux Permissions and have them injected into the SELinux Policy at startup.
Here is a discussion of some of concerns to consider when running your device in Permissive Mode : https://forum.xda-developers.com/general/general/discussion-root-selinux-risks-t3607295
Github Repo : https://github.com/Jman420/magisk-permissive-script
Change Log :
v1.0 - Initial Release
v1.1 - Update to Module Template v1400
v1.2 - Update to Module Template v1500
thank you brother!
LeEco LePro 3 Atmos can work finally!
huaiyue said:
thank you brother!
Can you tell me how to install LeEco LePro 3 Atmos ?
I hava supersu systemless.
Click to expand...
Click to collapse
These two things are completely unrelated.
If you want to install something, you install it. There's not much more to that.
huaiyue said:
thank you brother!
Can you tell me how to install LeEco LePro 3 Atmos ?
I hava supersu systemless.
Click to expand...
Click to collapse
In Magisk, go to the Modules section, and select the "+", and select the zip you downloaded.
Jman420 said:
This is a very simple module that installs a post-fs-data.sh script which enables SELinux Permissive Mode. This is useful for certain audio mods and removes the need to understand Magisk's file system & boot logic. No need to create your own scripts, just flash and forget.
I have only tested this on my Verizon HTC 10, but this module is so simple and generic that it should work on any Android device with SELinux.
Github Repo : https://github.com/Jman420/magisk-permissive-script
Click to expand...
Click to collapse
LeEco LePro 3 Atmos can work
however
xposed systemless failed.
---------- Post added at 01:32 ---------- Previous post was at 01:31 ----------
ahrion said:
These two things are completely unrelated.
If you want to install something, you install it. There's not much more to that.
Click to expand...
Click to collapse
http://imgur.com/a/Sbf9p
dolby fc.
---------- Post added at 01:36 ---------- Previous post was at 01:32 ----------
jhedfors said:
In Magisk, go to the Modules section, and select the "+", and select the zip you downloaded.
Click to expand...
Click to collapse
thank you brother!
Thanks a lot
huaiyue said:
thank you brother!
LeEco LePro 3 Atmos can work finally!
Click to expand...
Click to collapse
Regarding your other post mentioning Xposed (which I'm not quoting cause it's a mess). I'm running on Nougat so I can't use Xposed and haven't tested with it. If you give me more details I can try to determine what the issue is. Logs, error messages, symptoms would all be helpful.
Thor™ said:
Thanks a lot
Click to expand...
Click to collapse
I aim to please
I don't understand why this mod is usefull. In the latest version of magisk, there is a semi enforce/permissive linux bypass. The system thinks it's enforced, but in reality is permissive. Or maybe I didn't fully understand it?
its working with s5neo?
I've just flashed this zip. This allows Viper4Android to run in enforcing mode:
https://www.dropbox.com/s/k9cnruw2e1t1d4t/ViPER4Android-supolicy.zip?dl=0
I forgot the source. Maybe Google it
matssa said:
I don't understand why this mod is usefull. In the latest version of magisk, there is a semi enforce/permissive linux bypass. The system thinks it's enforced, but in reality is permissive. Or maybe I didn't fully understand it?
Click to expand...
Click to collapse
I agree that Magisk hides the actual SELinux Mode in such a way that if Magisk Hide is enabled the 'getenforce' command always returns 'Enforcing'. But if you do not run the 'setenforce 0' command the SELinux mode will still be set to 'Enforcing' rather than 'Permissive'. This script puts the SELinux mode into 'Permissive' at startup. Magisk Hide will still hide the fact that you are in Permissive Mode, which I believe is the 'pseudo permissive' mode that Magisk describes. But I can not find any settings or commands within Magisk that enable Permissive Mode.
htr5 said:
I've just flashed this zip. This allows Viper4Android to run in enforcing mode:
https://www.dropbox.com/s/k9cnruw2e1t1d4t/ViPER4Android-supolicy.zip?dl=0
I forgot the source. Maybe Google it
Click to expand...
Click to collapse
It's just a shell script, the source is in the zip file. This is really helpful and is the direction I want to take this project. Permissive Mode is great in that it gets the Apps/Mods that we want to run to work, but I consider it the equivalent of using a sledgehammer to hammer in a finishing nail. I would much rather be able to grant the specific permissions that each App needs rather than enable all permissions for all apps (which is what permissive mode does).
I plan on trying to develop an App which will assist in managing and generating a script which uses 'supolicy' to inject individual SELinux Policy Permissions. I had planned on using the Dolby Atmos LePro3 build as a guinea pig to try to isolate which permissions it needs and put together the supolicy command for them. I've hit a bit of a roadblock in verifying my supolicy command due to the format that the SELinux Policy is stored in on the device. I've found a project called sedump (https://ge0n0sis.github.io/posts/2015/12/exploring-androids-selinux-kernel-policy/) which claims to deserialize the Binary SELinux Policy to a readable format, but I can't seem to get it to work... the process seems to complete, but it generates an empty file... If anyone has experience with SELinux I'd really appreciate any feedback.
cosmin691 said:
its working with s5neo?
Click to expand...
Click to collapse
Dunno, I've only got an HTC 10 for testing. Give it a shot, if it doesn't work just uninstall the Magisk Package. Remember to disable Magisk Hide if you are testing to make sure it actually put your phone into Permissive Mode by using the 'getenforce' command.
It works for oneplus 3t on freedom OS rom.
Jman420 said:
This is a very simple module that installs a post-fs-data.sh script which enables SELinux Permissive Mode. This is useful for certain audio mods and removes the need to understand Magisk's file system & boot logic. No need to create your own scripts, just flash and forget.
I have only tested this on my Verizon HTC 10, but this module is so simple and generic that it should work on any Android device with SELinux.
Github Repo : https://github.com/Jman420/magisk-permissive-script
Click to expand...
Click to collapse
this zip must be flashed using twrp rite ? or stock recovery also will do fine ? because i tried many times to flash recovery for samsung e5 5.1.1 but ended up with boot loop. now running all stock !!
X_GOD said:
this zip must be flashed using twrp rite ? or stock recovery also will do fine ? because i tried many times to flash recovery for samsung e5 5.1.1 but ended up with boot loop. now running all stock !!
Click to expand...
Click to collapse
Should be able to install it through Magisk Manager or TWRP. Let me know if you have problems.
matssa said:
I don't understand why this mod is usefull. In the latest version of magisk, there is a semi enforce/permissive linux bypass. The system thinks it's enforced, but in reality is permissive. Or maybe I didn't fully understand it?
Click to expand...
Click to collapse
Now, I have magisk 11.6 on EMUI marshmallows V4A driver was abnormal because Enforcing selinux. Same happened with SuperSU 2.79. When I changed to permissive mode using terminal emulato/kernerl aduitor init.d script emulator/su.d SuperSU script, V4A driver was normal and it was processing. I like Magisk a lot because of its xposed like modules. Now using jman420's permissive magisk module.
Thor™ said:
Now, I have magisk 11.6 on EMUI marshmallows V4A driver was abnormal because Enforcing selinux. Same happened with SuperSU 2.79. When I changed to permissive mode using terminal emulato/kernerl aduitor init.d script emulator/su.d SuperSU script, V4A driver was normal and it was processing. I like Magisk a lot because of its xposed like modules. Now using jman420's permissive magisk module.
Click to expand...
Click to collapse
Without this module, ARISE is working fine, processing in 48000 on my side, so for V4A I don't think this is necessary, at least on my side.
Sent from my OnePlus3 using XDA Labs
matssa said:
Without this module, ARISE is working fine, processing in 48000 on my side, so for V4A I don't think this is necessary, at least on my side.
Click to expand...
Click to collapse
For ARISE I used to flash permissive script by osm0sis. Otherwise no luck with V4A, AM3D and Dolby.
Thor™ said:
For ARISE I used to flash permissive script by osm0sis. Otherwise no luck with V4A, AM3D and Dolby.
Click to expand...
Click to collapse
Strange... Did you enable magisk hide? If not, that is the reason.
Sent from my OnePlus3 using XDA Labs
matssa said:
Strange... Did you enable magisk hide? If not, that is the reason.
Click to expand...
Click to collapse
No, I was using SuperSU 2.79. Same happened with MagiskSU.
Hello all ,
Update August 7th 2018.
Wirh recent versions of v4a , theres no need to use this method unless you tried the latest official v4a magisk module or zip and it didn't work, current v4a magaik module works perfectly with latest 5.0.4 stable rom and all betas from oos, and moat if not all 8.1 custom roms
The following is not necessary as of August 7th 2018, unless you tried official zip or module and faced issues:
a lot are asking and searching for a way to make V4A work on OOS Oreo, sadly so far most posible ways either require a lot work or setting Linux to permissive wich breaks saftynet.
the bad news is this method also Sets SELinun to Permissive but it's simulated through Magisk so it doesn't break SafetyNet...
Method:
1- download and install busybox (make sure it's installed) i personally use a pro version, some of the ones on playstore wont install so try until you find a working one.
2- Update , using the latest V4A 2.5+ version by ahrion you don't need to use Magisk SELinux Permissive Scrip because he added to his module a detection script that will detect OOS Oreo and set permissive automatically
Download and flash LatestViPER4Android FX 2.5.0.5 [Unity/AML] by @ahrion
3-reboot and have fun
if the above doesn't work
2a- download and install Magisk SELinux Permissive Script module v1.1 (all thanks to @Jman420 ) and reboot.
3a- download ViPER4Android FX 2.3.4.0 (Super High Quality) v2.1
4a- install V4A module downloaded in the past step then reboot.
5a- now V4A should be perfectly working...and It Passes SafetyNet
Screens Attached.
Excellent job, works like a charm with oos 5.
Big thx!
is bluetooth also working on this method?
I have tried your method but V4A is still not working. Thanks anyway
NOSTALGIA said:
is bluetooth also working on this method?
Click to expand...
Click to collapse
yes, it's specifically for Bluetooth
Soerdroid said:
I have tried your method but V4A is still not working. Thanks anyway
Click to expand...
Click to collapse
make sure Busybox app is installed and open it and inside it click install, the app itself has to install somethings... there's no reason for it not to work, if you've done that and it's not working please share a screen of v4a driver status while playing music .
It didn't worked for me either
Works fine!
weriwd said:
It didn't worked for me either
Click to expand...
Click to collapse
Working fine here, after following the instructions.
Be sure to Enable ViperFX in the UI (Master Power) as well.
Gamm86 said:
Working fine here, after following the instructions.
Be sure to Enable ViperFX in the UI (Master Power) as well.
Click to expand...
Click to collapse
Well for me the drivers just wont install. Which app are you using for busybox? I think this is causing the problem.
weriwd said:
Well for me the drivers just wont install. Which app are you using for busybox? I think this is causing the problem.
Click to expand...
Click to collapse
Busybox for Android by JRummy Apps
Gamm86 said:
Busybox for Android by JRummy Apps
Click to expand...
Click to collapse
Nope not working again . Drivers wont install for some reason.
weriwd said:
Nope not working again . Drivers wont install for some reason.
Click to expand...
Click to collapse
Have you correctly installed the zip's through Magisk modules?
Gamm86 said:
Have you correctly installed the zip's through Magisk modules?
Click to expand...
Click to collapse
Well I am just flashing them through Magisk what could I mess up
weriwd said:
Well I am just flashing them through Magisk what could I mess up
Click to expand...
Click to collapse
You could have tried flashing them in recovery.
Anyway, I'm sorry to inform you I'm out of ideas.
Gamm86 said:
You could have tried flashing them in recovery.
Anyway, I'm sorry to inform you I'm out of ideas.
Click to expand...
Click to collapse
It's not a big deal. I will wait for stable release. Thank you for the help anyways.
I flash viper4arise (Deuteronomy 2.4), it contains viper4android 2.5.0.5. To get it to work with selinux enforcing I used to install the magisk module Allow audio server on Nougat (https://forum.xda-developers.com/on...sk-modules-oneplus-3t-t3548446/post70819460). On Oreo I doesn't work anymore. Now I set selinux to permissive in developer settings in viper. It'll last till you reboot, then selinux is enforcing again.
Link to viper4arise: https://forum.xda-developers.com/an...stems-auditory-research-t3379709/post71959306
Downloadlink: https://androidfilehost.com/?w=files&flid=146718
weriwd said:
Nope not working again . Drivers wont install for some reason.
Click to expand...
Click to collapse
Sadly jrummy app is the one that works for me too, i use the pro version...
Make sure it has root access , and maybe try to change the installation directory
You can try the buaybox module fromt he following thread
https://forum.xda-developers.com/oneplus-3t/themes/magisk-magisk-modules-oneplus-3t-t3548446
You may also want to check the following
http://support.jrummyapps.com/topic/magisk
This works on OP3 with Magisk and is 2.5.0.5...
Install the APK separately.
skymera said:
This works on OP3 with Magisk and is 2.5.0.5...
Install the APK separately.
Click to expand...
Click to collapse
Can you also upload the apk? There are a lot of apks with ads.. Thank you
theduke7 said:
Hello all ,
a lot are asking and searching for a way to make V4A work on OOS Oreo, sadly so far most posible ways either require a lot work or setting Linux to permissive wich breaks saftynet.
the bad news is this method also Sets SELinun to Permissive but it's simulated through Magisk so it doesn't break SafetyNet...
Method:
1- download and install busybox (make sure it's installed) i personally use a pro version, some of the ones on playstore wont install so try until you find a working one.
2- download and install Magisk SELinux Permissive Script module v1.1 (all thanks to @Jman420 )
3-reboot
4- download ViPER4Android FX 2.3.4.0 (Super High Quality) v2.1 (i couldn't get the 2.5.0.5 version to work, if someone has a module of that version that works please mention it and i'll add it here as well)
5- install V4A module downloaded in the past step then reboot.
6- now V4A should be perfectly working...and It Passes SafetyNet
Screens Attached.
Click to expand...
Click to collapse
Вот кажется работает
https://drive.google.com/file/d/1Q3uzrZLpn9kK9O_YKA4GJ31YxO5gQt0X/view?usp=drivesdk