Hi, I'm pretty sure I flashed the correct Xposed, but then it started to bootloop and I had the option to "Download and recovery",
So now I'm downloading.
Any other solution?
Boot to recovery and flash Xposed uninstaller. If you try to install Xposed again make sure you choose correct version. You need "xposed-v85.1-sdk23-arm64-custom-build-by-wanam-20160530".
yiftach said:
Hi, I'm pretty sure I flashed the correct Xposed, but then it started to bootloop and I had the option to "Download and recovery",
So now I'm downloading.
Any other solution?
Click to expand...
Click to collapse
I bought this phone yesterday. I could never start using a device unless I unlock bootloader, root and install xposed. I managed to unlock bootloader, flashed TWRP and also flashed systemless SuperSu (2.74-2). Also, I installed systemless xposed (i have shared link below). Phone took sometime and making me to think it is stuck in bootloader. I switched off and start in TWRP. Wiped art/dalvik and cache. Restarted normally. Everything worked fine.
Someone suggested here how to install official xposed (http://newesc.com/es/instalar-xposed-huawei-p9/).
But I installed systemless xposed (see here: http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268) which works fine without the need of any changes in /system/emui/base/prop/local.pro with this line "ro.config.hwtheme=1" as mentioned in the link I shared above.
Thank you guys!
Related
Hello All,
I am newbie here.
A little bit of background.
I did unclock thru HTCDEV, rooted with superSU via ADB, then run with STOCK ROM until recently flashed with ARHD 52 ROM, did clean wipe both thru TWRP and then in AROMA. I selected "superuser" during Aroma process.
everything gone well, phone worked fine for few days. OK with sense tool box.
but after I opened Xposed installer, I rebooted it, i went on boot loop, then I tried go into recovery flash the xposed disabler, it still boot loop.
So I did a system restore, managed to get back to phone. How ever i lost the root access.
when i open titanium backup /sense toolbox/ xposed installer it says "NO ROOT ACCESS" ROOT ACCESS FAIL"
What have I done wrong? what should I do to fix this?
any help would be much appreciated.
thanks
play541 said:
Hello All,
I am newbie here.
A little bit of background.
I did unclock thru HTCDEV, rooted with superSU via ADB, then run with STOCK ROM until recently flashed with ARHD 52 ROM, did clean wipe both thru TWRP and then in AROMA. I selected "superuser" during Aroma process.
everything gone well, phone worked fine for few days. OK with sense tool box.
but after I opened Xposed installer, I rebooted it, i went on boot loop, then I tried go into recovery flash the xposed disabler, it still boot loop.
So I did a system restore, managed to get back to phone. How ever i lost the root access.
when i open titanium backup /sense toolbox/ xposed installer it says "NO ROOT ACCESS" ROOT ACCESS FAIL"
What have I done wrong? what should I do to fix this?
any help would be much appreciated.
thanks
Click to expand...
Click to collapse
I have always just flashed SuperSU from TWRP
https://plus.google.com/+Chainfire/posts/hLKytCwUm6k
Hi mb_guy,
it works, many thanks!
Hey hi...
I'm using Vivo V1 mobile phone with android version 5.0.2...
I installed xposed installer... I tried to activate it bt its showin me failed to get root access error...
Plz suggest me how to activate framework?
play541 said:
Hello All,
I am newbie here.
A little bit of background.
I did unclock thru HTCDEV, rooted with superSU via ADB, then run with STOCK ROM until recently flashed with ARHD 52 ROM, did clean wipe both thru TWRP and then in AROMA. I selected "superuser" during Aroma process.
everything gone well, phone worked fine for few days. OK with sense tool box.
but after I opened Xposed installer, I rebooted it, i went on boot loop, then I tried go into recovery flash the xposed disabler, it still boot loop.
So I did a system restore, managed to get back to phone. How ever i lost the root access.
when i open titanium backup /sense toolbox/ xposed installer it says "NO ROOT ACCESS" ROOT ACCESS FAIL"
What have I done wrong? what should I do to fix this?
any help would be much appreciated.
thanks
Click to expand...
Click to collapse
SuperSU from TWRP
So I have twrp and rooted, running Xposed gravity box. I did not backup ROM when I started. Can I do a factory data wipe and not loose twrp and just reflash supersu? Or will I loose everything? My goal is to get the phone back to when I opened up the box new but keep twrp, bootloader unlocked and rooted.
How did you get Xposed to working, after installing Xposed and the apk my phone booted fine, but if I install any module I get a bootloop
Luminis1987 said:
How did you get Xposed to working, after installing Xposed and the apk my phone booted fine, but if I install any module I get a bootloop
Click to expand...
Click to collapse
You have to use v87 of Xposed Framework as it has a workaround for an issue caused by Android November Security Update.
Any earlier version will bootloop as soon as you enable any module.
Hello, I am currently rooted on stock oos 4.0.3, with latest TWRP and super su free v2.79, can anyone help me out and tell me how to switch to magisk please, thank you!
Can I just use super su full unroot option then flash magisk?
Either reflash the original boot.img or download the unsu script from https://forum.xda-developers.com/showpost.php?p=63615067, then flash magisk again.
palesaint said:
Either reflash the original boot.img or download the unsu script from https://forum.xda-developers.com/showpost.php?p=63615067, then flash magisk again.
Click to expand...
Click to collapse
so flash unsu, then flash magisk. simple?
Dr Grato said:
so flash unsu, then flash magisk. simple?
Click to expand...
Click to collapse
If you use the unSU script the process is:
unSU
stock boot image
Magisk
This method did not work for me.
I am on KETAN n10 and initially, viper did not work. I installed magisk but that didn't fix it. nor the meefik busy box. So i decided to uninstall magisk and go back to superSU and it magically worked...
I unrooted from SuperSU itself like shown on the app's forum I believe. It rebooted my phone, I went into recovery first and then just flashed the latest magisk and made the switch :laugh:
SourPower said:
I unrooted from SuperSU itself like shown on the app's forum I believe. It rebooted my phone, I went into recovery first and then just flashed the latest magisk and made the switch :laugh:
Click to expand...
Click to collapse
So you just went into the SuperSU app and used the built in Unroot option, and when the phone rebooted, you went back into recovery and flashed the latest Magisk and did NOT flash a boot.img and everything worked fine? you have root with Magisk now instead of SU and you didnt get a bootloop at all??? (i really want to swap out SU for magisk in my sons LG G2, so he can play PoGo again lol) (His G2 is running CRdroid custom rom, I wonder if that effects the steps I'll need to take)
Can anyone offer me some guidance or assistance please and thank you?
JG420 said:
So you just went into the SuperSU app and used the built in Unroot option, and when the phone rebooted, you went back into recovery and flashed the latest Magisk and did NOT flash a boot.img and everything worked fine? you have root with Magisk now instead of SU and you didnt get a bootloop at all??? (i really want to swap out SU for magisk in my sons LG G2, so he can play PoGo again lol) (His G2 is running CRdroid custom rom, I wonder if that effects the steps I'll need to take)
Can anyone offer me some guidance or assistance please and thank you?
Click to expand...
Click to collapse
If there's a proper backup of the boot image for the SuperSU app's full unroot option to restore, then that process should work perfectly (I've done it on a few devices myself). It's when it can't properly restore the boot image you might have issues and you'll have to do it yourself.
Take a look in the Magisk Troubleshooting guide, under "Moving from another systemless root solution to MagiskSU".
The nuclear method might be, to just flash the full stock OOS zip (can flash in TWRP) which will unroot and restore the boot.img (and everything else!). Then immediately flash Magisk before rebooting (so have the Magisk zip on the phone before updating). This should fully remove SuperSU, install Magisk, and keep TWRP on the phone.
Seeing as the original poster is still on OOS 4.0.3, you may want to update, anyway!
JG420 said:
So you just went into the SuperSU app and used the built in Unroot option, and when the phone rebooted, you went back into recovery and flashed the latest Magisk and did NOT flash a boot.img and everything worked fine? you have root with Magisk now instead of SU and you didnt get a bootloop at all??? (i really want to swap out SU for magisk in my sons LG G2, so he can play PoGo again lol) (His G2 is running CRdroid custom rom, I wonder if that effects the steps I'll need to take)
Can anyone offer me some guidance or assistance please and thank you?
Click to expand...
Click to collapse
I've done this on my 3t but I do have a G3 coincidentally lol, but yes I unrooted from su, it restarted my phone, before booting back into the system I went in twrp right away and then flashed magisk.
There are two options given in the SuperSU app, one is clean up to switch to a different SU app and the other is to permanently unroot. Which option is better?
hypothrax said:
There are two options given in the SuperSU app, one is clean up to switch to a different SU app and the other is to permanently unroot. Which option is better?
Click to expand...
Click to collapse
I chose the Full Unroot option. Then flashed magisk. Worked perfectly.
Use the full unroot option. Catch here is that you might get dm-verity warning. It won't affect the phone in anyway but Android Pay might not work and you will see the warning for 5 seconds, everytime you restart the phone.
Thanks so much for ths thread. I am on Resurrection Remix OS and inititally installed SuperSU over Magisk (which came with the ROM). I decided that I wanted to use Magisk instead and followed the instructions in this thread and it worked a treat.
Scroll down over this post to see anwer!
Hey there! I just got my Xiaomi Mi8 from HK Goldway at Aliexpress. It came with its bootloader already unlocked and a Global ROM flashed.
I wanted to install Magisk but failed horribly . I've already done that to several phones (my last one was a Moto X Play, and it worked without major complications). But with this one, it seems I can't get past the bootlogo.
Stock Fastboot image used:
dipper_global_images_V9.5.13.0.OEAMIFA_20180714.0000.00_8.1_global
This is what I've tried so far:
First try
Flashed TWRP for Mi8 version 0711.
Flashed Magisk.
Got a bootloop.
Reflashed stock image via Fastboot.
Second try
Booted (not flashed) TWRP.
Tried to install latest global weekly from this thread.
Also got a bootloop.
Reflashed stock image via Fastboot.
Third try
I thought that those flashable ZIP firmwares were too small for them to be a full-fledged OS. So I went and downloaded this other one. Global version.
I read somewhere that I needed to format data before flashing a new image, so I did.
Booted TWRP.
Formated data (not Wipe)
Installed that ZIP from TWRP and booted correctly.
Booted TWRP again and flashed Magisk.
Got bootloop.
Back to stock image via fastboot.
Last try
Booted TWRP.
Formatted data.
Installed MIUI via TWRP.
Without rebooting, flashed Magisk and no-verity-opt-encrypt-6.0.zip.
This got past bootlogo ("Unlocked" message changed to "powered by Android") but got stuck there. Not booting at all.
Right now I'm back to the last try, booting MIUI successfully but without Magisk nor no-verity-opt-encrypt.
I kinda have no more ideas left. I understand this is a new device but I can't understand why people claim the have been able to install Magisk and I can't! Other thoughts were, maybe they were running MIUI 10 Beta and it only works with that version? I'm unsure about that.
Can someone lend me a hand? What am I missing?
Thank you!!
EDIT: FIX!
Over here, user @richardyusan helped me out with an extra step.
What I did:
Installed Magisk V16.7.
Installed DM-VERITY AND FORCED ENCRYPTION DISABLER.
Performed fastboot format userdata.
Rebooted.
And I got my phone booting with Magisk Installed!
Even though I couldn't install any module, (every install claimed I needed Magisk v15+). I read some threads and with a Magisk Direct re-install (from its app) I got Magisk downgraded to v16 and everything worked perfectly!
Hope this works out for everyone having this problem!
have you tried to use Magisk 16.4,
if not, try to follow this guide:
https://www.theandroidsoul.com/xiaomi-mi-8-root/
gulp79 said:
have you tried to use Magisk 16.4,
if not, try to follow this guide:
https://www.theandroidsoul.com/xiaomi-mi-8-root/
Click to expand...
Click to collapse
Thank you for the fast reply!
I followed that guide and tried these steps:
fastboot boot mi8-twrp-3.2.2.img
Unencrypted via Pattern
Flashed Magisk v16.4 + DM verity disabler file
Reboot
But I'm still stuck at "powered by Android" bootlogo.
Normally it boots within 5 seconds but now it's taking forever. I'll wait a few minutes to see what happens.
I'm attaching some screenshots of the install process.
Padlite said:
Thank you for the fast reply!
I followed that guide and tried these steps:
fastboot boot mi8-twrp-3.2.2.img
Unencrypted via Pattern
Flashed Magisk v16.4 + DM verity disabler file
Reboot
But I'm still stuck at "powered by Android" bootlogo.
Normally it boots within 5 seconds but now it's taking forever. I'll wait a few minutes to see what happens.
I'm attaching some screenshots of the install process.
Click to expand...
Click to collapse
Ok,
but if you install Magisk 16.4, don't install also DM verity disabler.
DM verity disabler is needed if you don't want to root (see poin 14 in the linked guide).
Hope it works...
gulp79 said:
Ok,
but if you install Magisk 16.4, don't install also DM verity disabler.
DM verity disabler is needed if you don't want to root (see poin 14 in the linked guide).
Hope it works...
Click to expand...
Click to collapse
If I only flash Magisk 16.4, then phone shows "Powered by Android" and instantly reboots into stock recovery.
Only way to get it back booting, is performing fastboot flash boot boot.img from stock dipper_global_images_V9.5.13.0.OEAMIFA_20180714.0000.00_8.1_global image
I read somewhere about official and unofficial bootloader unlock. I didn't unlock the bootloader myself. Maybe it has something to do with it?
PS: Anyone had any luck using Magisk with MIUI 9.5.13?
Did you try with a newer magisk version ? ... 16.7 was released 15 day ago
https://github.com/topjohnwu/Magisk/releases
Direct link: https://github.com/topjohnwu/Magisk/releases/download/v16.7/Magisk-v16.7.zip
It´s a good practice to use magisk_uninstaller before flash new one if you had problems.
Direct link: https://github.com/topjohnwu/Magisk/releases/download/v16.7/Magisk-uninstaller-20180719.zip
Please tell us if it´s works
Seems that also others users have this problem
https://forum.xda-developers.com/showpost.php?p=77234924&postcount=6312
punk84z said:
Did you try with a newer magisk version ? ... 16.7 was released 15 day ago
https://github.com/topjohnwu/Magisk/releases
Direct link: https://github.com/topjohnwu/Magisk/releases/download/v16.7/Magisk-v16.7.zip
It´s a good practice to use magisk_uninstaller before flash new one if you had problems.
Direct link: https://github.com/topjohnwu/Magisk/releases/download/v16.7/Magisk-uninstaller-20180719.zip
Please tell us if it´s works
Click to expand...
Click to collapse
I just tried that. Uninstalling and re-installing v16.7. Although it seems now it's doing a few more steps, I'm still getting the recovery bootloop.
Install log screenshot attached.
gulp79 said:
Seems that also others users have this problem
https://forum.xda-developers.com/showpost.php?p=77234924&postcount=6312
Click to expand...
Click to collapse
Exactly that. Maybe we'll need to wait for a supported Magisk version. I'm still wondering what's the difference between our Mi8's that some can get Magisk working and some not. ?
I am running Magisk stable and tmiui 10 from Xiaomi. Eu without any problems.
I have a Mi 8 se and i install the eu rom boot the phone , reboot to twrp wipe and factory reset and installed magisk 16.4 .this is how works for me
i have the same problem too..when using china stable rom 16.7 magisk can be installed successfully tried many times...
flashing global version seems to have this issue...
tried all this steps too but no luck in global rom...
Padlite said:
Hey there! I just got my Xiaomi Mi8 from HK Goldway at Aliexpress. It came with its bootloader already unlocked and a Global ROM flashed.
I wanted to install Magisk but failed horribly . I've already done that to several phones (my last one was a Moto X Play, and it worked without major complications). But with this one, it seems I can't get past the bootlogo.
Stock Fastboot image used:
dipper_global_images_V9.5.13.0.OEAMIFA_20180714.0000.00_8.1_global
This is what I've tried so far:
First try
Flashed TWRP for Mi8 version 0711.
Flashed Magisk.
Got a bootloop.
Reflashed stock image via Fastboot.
Second try
Booted (not flashed) TWRP.
Tried to install latest global weekly from this thread.
Also got a bootloop.
Reflashed stock image via Fastboot.
Third try
I thought that those flashable ZIP firmwares were too small for them to be a full-fledged OS. So I went and downloaded this other one. Global version.
I read somewhere that I needed to format data before flashing a new image, so I did.
Booted TWRP.
Formated data (not Wipe)
Installed that ZIP from TWRP and booted correctly.
Booted TWRP again and flashed Magisk.
Got bootloop.
Back to stock image via fastboot.
Last try
Booted TWRP.
Formatted data.
Installed MIUI via TWRP.
Without rebooting, flashed Magisk and no-verity-opt-encrypt-6.0.zip.
This got past bootlogo ("Unlocked" message changed to "powered by Android") but got stuck there. Not booting at all.
Right now I'm back to the last try, booting MIUI successfully but without Magisk nor no-verity-opt-encrypt.
I kinda have no more ideas left. I understand this is a new device but I can't understand why people claim the have been able to install Magisk and I can't! Other thoughts were, maybe they were running MIUI 10 Beta and it only works with that version? I'm unsure about that.
Can someone lend me a hand? What am I missing?
Thank you!!
Click to expand...
Click to collapse
i allso hade that problem
wen i got my phone it was with global rom
then i flashed twrp
didt like they said
wipe dalvik cache an cache an factory reset
flashed miui eu rom
then flashed twrp again rebooted into recovery
flashed magisk 16.4
ended up in staying on android logo
then i try format data an didt it all again
still android logo an nothing more
well then i didt what i allways didt on my other devices
i wiped dalvik cache
cache
data
system
then i flashed eu rom
an twrp again rebooted into recovery again
then flashed magisk 16.4
rebooted system an now it booted up
REMEMBER to manke a backup before flashing all off thise things otherwice u wont have the option to go back if something goes wrong
-fluffy- said:
i allso hade that problem
wen i got my phone it was with global rom
then i flashed twrp
didt like they said
wipe dalvik cache an cache an factory reset
flashed miui eu rom
then flashed twrp again rebooted into recovery
flashed magisk 16.4
ended up in staying on android logo
then i try format data an didt it all again
still android logo an nothing more
well then i didt what i allways didt on my other devices
i wiped dalvik cache
cache
data
system
then i flashed eu rom
an twrp again rebooted into recovery again
then flashed magisk 16.4
rebooted system an now it booted up
REMEMBER to manke a backup before flashing all off thise things otherwice u wont have the option to go back if something goes wrong
Click to expand...
Click to collapse
Well maybe the critical step is to wipe everything, including System.
Did you Format anything instead of Wipe this last try?
Also, could you please share a link from that working MIUI rom?
Thank you!
Sorry for double-posting, but I wanted to notify you I GOT IT!
Over here, user @richardyusan helped me out with an extra step.
What I did:
Installed Magisk V16.7
Installed DM-VERITY AND FORCED ENCRYPTION DISABLER.
Performed fastboot format userdata
Rebooted
And I got my phone booting with Magisk Installed!
Even though I couldn't install any module, (every install claimed I needed Magisk v15+). I read some threads and with a Magisk Direct re-install (from its app) I got Magisk downgraded to v16 and everything worked perfectly!
Here are some screenshots!
Padlite said:
Sorry for double-posting, but I wanted to notify you I GOT IT!
Over here, user @richardyusan helped me out with an extra step.
What I did:
Installed Magisk V16.7
Installed DM-VERITY AND FORCED ENCRYPTION DISABLER.
Performed fastboot format userdata
Rebooted
And I got my phone booting with Magisk Installed!
Even though I couldn't install any module, (every install claimed I needed Magisk v15+). I read some threads and with a Magisk Direct re-install (from its app) I got Magisk downgraded to v16 and everything worked perfectly!
Here are some screenshots!
Click to expand...
Click to collapse
Is Google Assistant ("OK Google") working for you now as well?
I just flashed magisk v16.0 over the Miui 8.7.26 build and it booted without issues.
japancakes said:
Is Google Assistant ("OK Google") working for you now as well?
Click to expand...
Click to collapse
I just checked and no. If I go to Google Settings -> Voice, Voice Match is disabled because "This feature is currently unavailable for this language". Even though it's set to English UK. Maybe there is some Magisk Module to enable it?
Thanks, followed these steps and it got magisk going on the recent global release. Only difference was i had to use fastboot erase userdata.
Padlite said:
Scroll down over this post to see anwer!
EDIT: FIX!
Over here, user @richardyusan helped me out with an extra step.
What I did:
Installed Magisk V16.7.
Installed DM-VERITY AND FORCED ENCRYPTION DISABLER.
Performed fastboot format userdata.
Rebooted.
And I got my phone booting with Magisk Installed!
Even though I couldn't install any module, (every install claimed I needed Magisk v15+). I read some threads and with a Magisk Direct re-install (from its app) I got Magisk downgraded to v16 and everything worked perfectly!
Hope this works out for everyone having this problem!
Click to expand...
Click to collapse
Hey guys im a toal newbie to this whole flash theme but Ive purchased a mi8 and i would like to use GooglePay and so on, could someone give me a step by step tutorial , how to install all this stuff on my device ?
Padlite said:
Sorry for double-posting, but I wanted to notify you I GOT IT!
Over here, user @richardyusan helped me out with an extra step.
What I did:
Installed Magisk V16.7
Installed DM-VERITY AND FORCED ENCRYPTION DISABLER.
Performed fastboot format userdata
Rebooted
And I got my phone booting with Magisk Installed!
Even though I couldn't install any module, (every install claimed I needed Magisk v15+). I read some threads and with a Magisk Direct re-install (from its app) I got Magisk downgraded to v16 and everything worked perfectly!
Here are some screenshots!
Click to expand...
Click to collapse
well i didt not flash dm-verity an mine pass saftynet
Hey guys,
I have installed the xposed installer from the magisk downloads, and then i have rebooted the phone. Now the phone is in a bootloop and i can't delete the installer from the magisk app.
I have tried to install the xposed sdk26 from the twrp, but that doesn't work. I have downloaded the xposed uninstaller too and flash it, but that doesn't work either. When is at the loading screen, after a while, the phone reboots and gets into the twrp.
I don't know what to do, please help
Backup your data to a PC from TWRP, clean everything and flash again.
rmrbpt said:
Backup your data to a PC from TWRP, clean everything and flash again.
Click to expand...
Click to collapse
I have tried and the same happens...
Try with miflash using the option to erase everything (but not the option to lock the device!).