My lenovo a-7000 boot into cwm recovery mode
Last time when I restarted my phone it's goes direct into recovery mode after then whenever,i reboot my system it's get back into recovery mode.
I tried power off and manually power on by power button and factory reset but it's not fixed.
Help me to get back my a-7000
I tried key test so it's confirm that my volume buttons are working fine
Am using cwm recovery and AOSP stallion mod custom rom
installed miui 7.0 also
I installed miui 7.0 custom rom also but it's not working either
When I power on my phone it's shows miui 7 logo and the enter into cwm recovery direct
Can I reset my bootloader? Please help me someone ????
I've update on OTA with S149 firmware, but after reboot, my phone's always shows "Lenovo-Recovery" screen. I can't boot into Android OS.
Help, please.
problem solved
Download stock recovery.zip of lenovo a7000 from xda and install it via cwm and my phone remove cwm recovery from system and add stock recovery after that I downloaded original marshmallow stock rom of a7000 put it in SF card ,rename stockrom.zip to update.zip and put a card in phone
Open stock recovery click on install updates and hurray phone automatically detect update.zip and installed
After reboot my phone got a new life it's back with pure stock rom marshmallow
baby1982 said:
I've update on OTA with S149 firmware, but after reboot, my phone's always shows "Lenovo-Recovery" screen. I can't boot into Android OS.
Help, please.
Click to expand...
Click to collapse
Download original marshmallow stock rom of a7000 and put it in Sd card rename it to update.zip and install it via recovery 'install update'
Hope it'll help you
baby1982 said:
I've update on OTA with S149 firmware, but after reboot, my phone's always shows "Lenovo-Recovery" screen. I can't boot into Android OS.
Help, please.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lenovo-a7000/development/stock-firmware-lenovo-a7000-t3205505link of OTA stock rom and other files
Related
I want to flash a CM11 into my tablet, so I unlocked bootloader.(Devise's Build Number: Version V10.26.1.18 )
------> I flashed a CWMrecovery 6.0.4.5 into it .
----- > I reboot to bootloader can't get into recovery, so i select a full wipe in bootloader.
------>Tablet stucked in boot screen. I can't flash anything into it, because i can't get into bootloader & recovery(Even use Vol - &Power Button).
How can i get into bootloader again?
Or recovery?
Or flash a Offical rom back into it without recovery?
Unfortunately wiping from the boot loader on a custom recovery can hard brick the device. 6.0.4.5 is very old, the latest cwm is 6.0.5.1.
Try flashing that from the boot loader.
But how can get into bootloader?
I have try press Vol Down & Power button, it didn't work,and my computer said “< waiting for device >“。
Is it possible to connect with PC once more?
Try the SD card stock update method
see if this works... this is the best method I have seen to recover the TF701T. Try the manual SD card update method by downloading the correct firmware for your device first from Asus. then see if there is a zip inside of a zip file if so unpack it once. Rename the zip file to T4_SDUPDATE.zip and put the zip firmware file on the root of the SD card and power on or restart your device. it should detect a firmware update. this is the procedure I used when I bought my tablet.
I updated my tablet to the latest stock firmware before I UNLOCKED and installed the latest CWM recovery. Then I booted into stock and shut down then did a full backup of stock, then I flashed custom ROM and latest SuperSU... if you find this helpful, please click the Thanks button below!
aa3818687 said:
But how can get into bootloader?
I have try press Vol Down & Power button, it didn't work,and my computer said “< waiting for device >“。
Is it possible to connect with PC once more?
Click to expand...
Click to collapse
Sorry mate, the only way to get into the bootloader is with Power and Vol Down. If that does not work you cannot access fastboot, you cannot access recovery and the tablet is a brick. Only a new mainboard can revive it.
I am not sure, if bootloader located in SPI flash it is not very difficult to reprogram it with external programmer.
please help, i can´t flash an original firmware with original recovery.
now i´m on x rom v2.
i can flash roms with twrp.
my goal is to flash my rom 3.3
therefore i want to flash original b609 emui 3 first.
but it doesn´t work.
i think the problem migt be, that i haven´t the right original recovery (and bootloader)?
tried to install b609 original recovery with fastboot.
seemed to be ok, but if i want to enter in recovery mode with pressing vol+ and vol- and power while phone is of, the phone just starts normally. same thing if i do a local update in settings, phone just reboots.
the dload folder with the update,app is in the root of sdcard and internal sdcard too. but tried both ways too..
please help!
sorry for bad english
wuffi123 said:
please help, i can´t flash an original firmware with original recovery.
now i´m on x rom v2.
i can flash roms with twrp.
my goal is to flash my rom 3.3
therefore i want to flash original b609 emui 3 first.
but it doesn´t work.
i think the problem migt be, that i haven´t the right original recovery (and bootloader)?
tried to install b609 original recovery with fastboot.
seemed to be ok, but if i want to enter in recovery mode with pressing vol+ and vol- and power while phone is of, the phone just starts normally. same thing if i do a local update in settings, phone just reboots.
the dload folder with the update,app is in the root of sdcard and internal sdcard too. but tried both ways too..
please help!
sorry for bad english
Click to expand...
Click to collapse
Try to put the update.zip in the dload folder. Then go to local update.
That did the trick for me.
By the way: you enter recovery by: volume + and power. Hold the power button untill the phone vibrates. Then release the power button but hold the volume +
Same issue. I rooted and installed TWRP, bootloader is unlocked. My version is L10. I can't seem to get any rom to work though. Tried updating to emui 3.0. boot loop. Tried flashing myrom 3.3. boot loop. Tried fastboot flashing recovery to stock 609 recovery, now recovery won't load. flash back to twrp, and it works. I am going to try this update.zip thing, but please let me know if there is a way to safely get to a new rom. Stuck with emui 2.3 or whatever, is very annoying. b127, and it won't download an ota, says it's already latest version
Ever since google rolled out the marshmallow update I have been plagued with battery issues to an extent where it was dropping to half from a full charge within a day even on standby . Having looked at many fixes on this forum which including rooting and replacing the kernel or simply turning core features like wifi off.For some users it may be tedious and it may risk bricking their device . So I decided to go back to stock 5.1.1 until google fixes the battery issues.
Before Proceeding Backup Your Data.
Follow the steps below to roll back to stock 5.1.1 along with stock recovery.
1) Download the Android One Toolkit http://forum.xda-developers.com/cro...oolbox-android-one-toolkit-one-click-t3030165.
2) Download 5.1 OTA update from here : http://forum.xda-developers.com/cro...l/ota-micromax-official-ota-captured-t3058879
3) Download 5.1.1 OTA update from here: http://forum.xda-developers.com/cro...al/ota-canvas-a1-5-1-1-captured-link-t3121543
4) Place both the OTA zips in root of SD CARD.Note the names of both versions.
5) Open Android One Toolkit.Enable USB Debugging . Unlock the Bootloader.
6) Install CWM Recovery from the Toolkit.
7) Reboot to Recovery.
8) Make a full backup of your existing ROM in case something goes wrong.
9) Erase Data , Cache & Dalvik Cache.
10) Select install zip from ext-sd card select the 5.1 OTA zip.
11) After completion reboot your phone. Update will also replace CWM with stock recovery ( No Worries)
12) Keep Wifi Off & Data connection off to prevent marshmallow being downloaded again during Setup . Setup your device Offline.
13) Reboot to stock recovery using key combo Power + Volume Up.If you get "No command" in stock recovery continue pressing Power+Volume Up until menu appears.
14) Select Update from SD Card . Select 5.1.1 OTA zip.
15) Reboot phone and you will now be on 5.1.1. Along with Stock Recovery.
16)Once Data or Wifi is enabled you may get update prompts of Marshmallow in notification. Disable update notification by long pressing on notification and goto settings from there you can disable it.
17) You may Relock Bootloader if You Wish from toolkit
Disclaimer:
I Am Not Responsible For Any Damage Caused To your Phone.
Credits to:
@anil293 for his toolkit
@varun.chitre15 For His Recoveries
@ghpranav & @GokulNC for OTA links.
Draining continues
Can't go to CWM even I unlocked bootloader I flash ed CWM but still on NO COMMAND
ranj9660 said:
Can't go to CWM even I unlocked bootloader I flash ed CWM but still on NO COMMAND
Click to expand...
Click to collapse
FIrst check in android toolkit in list devices if your device is mentioned.
After flashing CWM boot straight to recovery. Booting to OS may cause the recovery to be overwritten by STOCK recovery.
Yeah my device
My device mentioned too . I clicked list devices and I got device id then only I unlocked bootloader and installed custom recovery also but I can't enter to customer recovery ?
ranj9660 said:
My device mentioned too . I clicked list devices and I got device id then only I unlocked bootloader and installed custom recovery also but I can't enter to customer recovery
Click to expand...
Click to collapse
After installing CWM from toolkit don't restart to OS. Press Power+Volume Up until recovery select option appears.
But now
(First i have to thank you to giving me the instruction now its worked) Doesn't show zip files. What to do? I wiped dalvik cache, data and cache partition but doesn't show zip file ? got another problem
Can I use Twrp?
What's wrong using TWRP instead of CWM? I do not have windows. I have Linux(Ubuntu). From linux I can flash anything. But the problem is I don't have the latest recovery image of CWM for Android one devices. (The CWM project has been abandoned anyway).
My only concern is to get back the stock recovery after flashing 5.1.
The process you told to revert back to Lollipop after Marshmallow update, have u done that, are u succeeded.
Please tell me, because after Marshmallow update i got a severe battery drain and over heat in My Spice Dream Uno MI-498.
When my phone is in ideal it is okay but when i started using it then the issue started.
After revert back to Lollipop according to your process is there any IMEI problem.
Is it possible after flashing the ROM in Custom Recovery can it revert back to Stock Recovery.
androidone14 said:
The process you told to revert back to Lollipop after Marshmallow update, have u done that, are u succeeded.
Please tell me, because after Marshmallow update i got a severe battery drain and over heat in My Spice Dream Uno MI-498.
When my phone is in ideal it is okay but when i started using it then the issue started.
After revert back to Lollipop according to your process is there any IMEI problem.
Is it possible after flashing the ROM in Custom Recovery can it revert back to Stock Recovery.
Click to expand...
Click to collapse
Just flash away the STOCK ROM and you'll get everything STOCK
---------- Post added 5th November 2015 at 00:06 ---------- Previous post was 4th November 2015 at 23:57 ----------
ranj9660 said:
(First i have to thank you to giving me the instruction now its worked) Doesn't show zip files. What to do? I wiped dalvik cache, data and cache partition but doesn't show zip file �� got another problem
Click to expand...
Click to collapse
Please give more details or send a pic of what is going wrong for you. You have to put the zip file in your external card and flash from install from external SD card if that's what you are asking for.
wickedspice said:
Ever since google rolled out the marshmallow update I have been plagued with battery issues to an extent where it was dropping to half from a full charge within a day even on standby . Having looked at many fixes on this forum which including rooting and replacing the kernel or simply turning core features like wifi off.For some users it may be tedious and it may risk bricking their device . So I decided to go back to stock 5.1.1 until google fixes the battery issues.
Before Proceeding Backup Your Data.
Follow the steps below to roll back to stock 5.1.1 along with stock recovery.
1) Download the Android One Toolkit http://forum.xda-developers.com/cro...oolbox-android-one-toolkit-one-click-t3030165.
2) Download 5.1 OTA update from here : http://forum.xda-developers.com/cro...l/ota-micromax-official-ota-captured-t3058879
3) Download 5.1.1 OTA update from here: http://forum.xda-developers.com/cro...al/ota-canvas-a1-5-1-1-captured-link-t3121543
4) Place both the OTA zips in root of SD CARD.Note the names of both versions.
5) Open Android One Toolkit.Enable USB Debugging . Unlock the Bootloader.
6) Install CWM Recovery from the Toolkit.
7) Reboot to Recovery.
8) Make a full backup of your existing ROM in case something goes wrong.
9) Erase Data , Cache & Dalvik Cache.
10) Select install zip from ext-sd card select the 5.1 OTA zip.
11) After completion reboot your phone. Update will also replace CWM with stock recovery ( No Worries)
12) Keep Wifi Off & Data connection off to prevent marshmallow being downloaded again during Setup . Setup your device Offline.
13) Reboot to stock recovery using key combo Power + Volume Up.If you get "No command" in stock recovery continue pressing Power+Volume Up until menu appears.
14) Select Update from SD Card . Select 5.1.1 OTA zip.
15) Reboot phone and you will now be on 5.1.1. Along with Stock Recovery.
16)Once Data or Wifi is enabled you may get update prompts of Marshmallow in notification. Disable update notification by long pressing on notification and goto settings from there you can disable it.
17) You may Relock Bootloader if You Wish from toolkit
Disclaimer:
I Am Not Responsible For Any Damage Caused To your Phone.
Credits to:
@anil293 for his toolkit
@varun.chitre15 For His Recoveries
@ghpranav & @GokulNC for OTA links.
Click to expand...
Click to collapse
Thanks!!!
But is there any way to roll back without rooting the phone.
i don't want to my phone now.
anupamdubey said:
Thanks!!!
But is there any way to roll back without rooting the phone.
i don't want to my phone now.
Click to expand...
Click to collapse
Downgrade is possible only through unlocking bootloader and then flashing custom recovery which shall help you flash the LP firmware.
Rooting has nothing to do with this.
wickedspice said:
After installing CWM from toolkit don't restart to OS. Press Power+Volume Up until recovery select option appears.
Click to expand...
Click to collapse
it gets rebooted automatically after flashing cwm recovery but still no command.
stan1996 said:
it gets rebooted automatically after flashing cwm recovery but still no command.
Click to expand...
Click to collapse
Yes , thats the tricky part as os tries to restore stock recovery on boot. Here's what you need to do. On your computer when the toolkit prompt says " completed /finished" prevent rebooting by quickly pressing power+volume up. Once you get the selection prompt select recovery by volume up and confirm selection by volume down.
You have to do this only once , After you successfully boot to cwm it will prevent os from re writing recovery
wickedspice said:
Yes , thats the tricky part as os tries to restore stock recovery on boot. Here's what you need to do. On your computer when the toolkit prompt says " completed /finished" prevent rebooting by quickly pressing power+volume up. Once you get the selection prompt select recovery by volume up and confirm selection by volume down.
You have to do this only once , After you successfully boot to cwm it will prevent os from re writing recovery
Click to expand...
Click to collapse
thank you so much:angel::angel::angel:
I am getting stuck on unlock bootloader, it freezes and does nothing ? any ideas guys ? I really need to get away from marshmallow, hot phone, no 4g etc etc
I recently wanted to change to cianogenmod with the honor 4x, unlock the bootloader, the thing is that when I install the TWRP everything ok but at boot recovery was left on the home screen, install the CWM and perfect installed, but it appears to be a CHE2TL00H And does not let me install any other ROM, then when I try to install the original recovery or any other recovery does not start in recovery mode, the phone turns on but does not go into recovery only leaves the CWM, someone will accidentally have files to flash with flash tool That is not the file UPDATE.APP that as they already know only works with the original recovery or give me an idea or solution because I have done everything possible and nothing is not because it only accepts that recovery and not any other is in kit kat But I want cyanogenmod or even the original recovery to install the original rom
salazar777 said:
I recently wanted to change to cianogenmod with the honor 4x, unlock the bootloader, the thing is that when I install the TWRP everything ok but at boot recovery was left on the home screen, install the CWM and perfect installed, but it appears to be a CHE2TL00H And does not let me install any other ROM, then when I try to install the original recovery or any other recovery does not start in recovery mode, the phone turns on but does not go into recovery only leaves the CWM, someone will accidentally have files to flash with flash tool That is not the file UPDATE.APP that as they already know only works with the original recovery or give me an idea or solution because I have done everything possible and nothing is not because it only accepts that recovery and not any other is in kit kat But I want cyanogenmod or even the original recovery to install the original rom
Click to expand...
Click to collapse
Hi,
I'm moving this thread to the Honor 4x Q&A That's the best for it :good:
Hey everyone !
I have a rooted Honor 5C NEM-L51 (European variant) with TWRP custom recovery and, as some of you may know, Nougat update is now available to download using Huawei Firware Finder.
However, a stock recovery is needed in order to get OTA updates and since I couldn't find a stock recovery image by browsing the web, I decided to go back to a full stock ROM.
So I tried to do this the usual way : creating a dload folder, placing the update.app file in it, powering off the phone and back on by pressing simultaneously the volume up, down and power button... but this always lead me right to TWRP, no matter how many times I tried. I restored my phone from soft brick using this method about two months ago with no issue, but now I can't get it to work, even if I release the power button once the phone boots or do any other shady manipulation. Could this have anything to do with the latest TWRP update ?
I also tried to do the "Power on method" by dialing " *#*#2846579#*#*" to go to the project menu and flash the file from here, but it rebooted to TWRP...
I'm at a complete loss here. Can anyone please help me with this ?
just install recovery img and other needed image files from stock firmware thru adb....
thelous said:
just install recovery img and other needed image files from stock firmware thru adb....
Click to expand...
Click to collapse
Thank you for answering. The problem is, I don't know where to find stock recovery image, all I can find with Huawei Firmware Finder is the full stock ROM. Browsing the web didn't help so far.
Can I flash the whole ROM through ADB ?
Zarou said:
Thank you for answering. The problem is, I don't know where to find stock recovery image, all I can find with Huawei Firmware Finder is the full stock ROM. Browsing the web didn't help so far.
Can I flash the whole ROM through ADB ?
Click to expand...
Click to collapse
Extract the update.app of full stock rom using huawei update extractor. There u will find recovery.img. Extract it and flash using fastboot.
Shubho20 said:
Extract the update.app of full stock rom using huawei update extractor. There u will find recovery.img. Extract it and flash using fastboot.
Click to expand...
Click to collapse
I did that and then tried to install the update through the dialer. It rebooted and I'm stuck on "Your device is booting now..." screen. Can't even turn it off, it reboot automatically to this screen. Seems like there is no recovery at all and it tried to do the update through this inexistant recovery no matter how many times it reboot...
What can I do now ?
Zarou said:
I did that and then tried to install the update through the dialer. It rebooted and I'm stuck on "Your device is booting now..." screen. Can't even turn it off, it reboot automatically to this screen. Seems like there is no recovery at all and it tried to do the update through this inexistant recovery no matter how many times it reboot...
What can I do now ?
Click to expand...
Click to collapse
Don't do it through the dialer. After flashing the stock recovery, just restart and then try the three button configuration(volume up + volume down + power)
Shubho20 said:
Don't do it through the dialer. After flashing the stock recovery, just restart and then try the three button configuration(volume up + volume down + power)
Click to expand...
Click to collapse
I can't. I am stuck on the "Your device is booting now..." screen. If I turn it off, it automatically turns on again to this screen.
Edit : Nevermind, looks like I didn't press the button correctly. Only the recovery was missing, I finally could boot to system by pressing the power button. Then I reinstalled TWRP with ADB and restored my nandroid backup. Back to the start...
I may have a hint about what went wrong. Extracting the Nougat UPDATE.APP file gave me two recovery files : recovery.img and recovery2.img. I only flashed the first. Any idea why there were two of them ? I am going to try with the FULLOTA-MF file (tried with the FULLOTA-MF-PV file before), or maybe should I try to extract files from the previous update ?
EDIT 2 : Still stuck with TWRP. I extracted several UPDATE.APP files and all have two RECOVERY.IMG files. I tried flashing them both, one after another and then reboot to erecovery, but TWRP is still here. How can I get rid of it and get back to stock recovery please ?
Zarou said:
I can't. I am stuck on the "Your device is booting now..." screen. If I turn it off, it automatically turns on again to this screen.
Edit : Nevermind, looks like I didn't press the button correctly. Only the recovery was missing, I finally could boot to system by pressing the power button. Then I reinstalled TWRP with ADB and restored my nandroid backup. Back to the start...
I may have a hint about what went wrong. Extracting the Nougat UPDATE.APP file gave me two recovery files : recovery.img and recovery2.img. I only flashed the first. Any idea why there were two of them ? I am going to try with the FULLOTA-MF file (tried with the FULLOTA-MF-PV file before), or maybe should I try to extract files from the previous update ?
EDIT 2 : Still stuck with TWRP. I extracted several UPDATE.APP files and all have two RECOVERY.IMG files. I tried flashing them both, one after another and then reboot to erecovery, but TWRP is still here. How can I get rid of it and get back to stock recovery please ?
Click to expand...
Click to collapse
I have flashed several times Twrp recovery on my honor 5c, and i didn't even had to flash the stock recovery to get back to stock rom. I had placed the dload folder with full update in it, and used the 3 button method to flash the full rom. And i was once again in full stock including recovery. Try this. If it doesn't help, just flash the stock recovery. Then type fastboot reboot, let it boot. Then power it off. Now press volume up + power button. Just see which recovery it boots.
Shubho20 said:
I have flashed several times Twrp recovery on my honor 5c, and i didn't even had to flash the stock recovery to get back to stock rom. I had placed the dload folder with full update in it, and used the 3 button method to flash the full rom. And i was once again in full stock including recovery. Try this. If it doesn't help, just flash the stock recovery. Then type fastboot reboot, let it boot. Then power it off. Now press volume up + power button. Just see which recovery it boots.
Click to expand...
Click to collapse
As I said, the three buttons method is not working and boot right into TWRP.
Which stock recovery ? There are two of them. Anyway, I tried this again, it led me back to the endless "Your device is booting now..." screen.
Okay, trouble's gone real now. I tried to flash the boot image from the update using fastboot. Now I'm stuck in "Your device is booting now..." no matter what I do...
Zarou said:
Okay, trouble's gone real now. I tried to flash the boot image from the update using fastboot. Now I'm stuck in "Your device is booting now..." no matter what I do...
Click to expand...
Click to collapse
Try the volume up + power button. Just see it's booting into recovery or not
Shubho20 said:
Try the volume up + power button. Just see it's booting into recovery or not
Click to expand...
Click to collapse
Worked. But guess what ? In TWRP. ><
But at least I can restore my system... Still, I don't understand this whole situation, why is TWRP always coming back ? I'd really like to get to flash this OTA update...
Zarou said:
Worked. But guess what ? In TWRP. ><
But at least I can restore my system... Still, I don't understand this whole situation, why is TWRP always coming back ? I'd really like to get to flash this OTA update...
Click to expand...
Click to collapse
Tell me the whole process what u r doing.
Shubho20 said:
Tell me the whole process what u r doing.
Click to expand...
Click to collapse
Well, I tried with or without uninstalling SuperSU which has an option to try to restore stuck boot and recovery images (which didn't work in my case).
I used adb to reboot into bootloader, from where I flashed either RECOVERY.IMG or RECOVERY.IMG and then RECOVERY2.IMG which I got from Huawei Update Extractor and reboot from fastboot. Then I tried to power off and back on my device by pressing volumes up and power button which led me to TWRP or endless booting screen. Flashing boot image from Update file gave me the same result.
Zarou said:
Well, I tried with or without uninstalling SuperSU which has an option to try to restore stuck boot and recovery images (which didn't work in my case).
I used adb to reboot into bootloader, from where I flashed either RECOVERY.IMG or RECOVERY.IMG and then RECOVERY2.IMG which I got from Huawei Update Extractor and reboot from fastboot. Then I tried to power off and back on my device by pressing volumes up and power button which led me to TWRP or endless booting screen. Flashing boot image from Update file gave me the same result.
Click to expand...
Click to collapse
Okay. What rom u r in now? And which twrp r u using?
Shubho20 said:
Okay. What rom u r in now? And which twrp r u using?
Click to expand...
Click to collapse
Official stock ROM with TWRP 3.1.0.0.
Zarou said:
Official stock ROM with TWRP 3.1.0.0.
Click to expand...
Click to collapse
Emui version?
Shubho20 said:
Emui version?
Click to expand...
Click to collapse
4.1.2.
Zarou said:
4.1.2.
Click to expand...
Click to collapse
Flash the meticulus twrp. Then repeat the dload process. See if that helps.
Shubho20 said:
Flash the meticulus twrp. Then repeat the dload process. See if that helps.
Click to expand...
Click to collapse
Did that. I even flashed the previous version of the official TWRP beforehand. Still nothing. I even wiped everything from TWRP except internal storage and external SD card and still, the three buttons method led me right back to Meticulus TWRP.
However, I did notice something very strange. If I boot normally by pressing the power button and then, on the "Your device has been unlocked and can't be trusted" screen, press the volume up button to "boot into erecovery to restore my device", it boots into... official TWRP 3.1.0.0 !!! What the hell ?!
Do you have any idea ? This whole situation is so weird...
EDIT : This is just complete nonsense. I even wiped the internal storage and this abomination of TWRP 3.1.0.0 was still there. I really am at a complete loss here. ><