List of Builds Released
It's better to start from scratch before new build
Click to expand...
Click to collapse
Build 1
Build 2
Build 3
Build 4
Build 5
Build 6
Build 7
Build 8
Build 9
Build 10
Build 11
Post 216 and Future @erickwill]
Build 12
Build 13
Build 14-FINGERPRINT
Build 15
Build 16[TEST]
Build 17
Build 18 - Reliability Build
Build 19 - VOIP for WhatsApp an IM Apps Fixed
Build 20
Build 21 - Fingerprint /// No Fingerprint
Build 22_VOIP,WIFI,FIngerprint Works_update Bootloader
Build 23
Build 24_Stability Fixes
Build 24(Attempt to fix BT and SMS Bug, FIngerprint might be tricky)
Build 25
Build 26 aka Stable Fix Build
Build 27 aaka Stable Build V2
Build [email protected] Build v3+ Best Build
Build 29 - More Patches to HAL and Kernel
Build 30 - More patches to Kernel
Build 31 - Many Fixes
Build 32 - Many Performance Tweaks - Stable - Fingerprint Working + VOIP Apps need verification
Build 33 - New Update
Build 34
Build 35 @21/8 [Check the camera feature // Smooth as butter improvements
Build 36 - Stable FIngerprint / No more lags / Better VOIP and Bluetooth / Many Patches for kernel [RECOMMENDED]
Build 37 - Refined
Build 38 /// Build 38 Performance Editon [Best Build Ever]
Build 38 - New - 27/9 Build
Build 28 - Minor Fixes
Build 29 Many Patches _ Bluetooth Earpiece WIP
Build 39 - Final Marshmallow Build - Many Minor Fixes and Updates
Changelog [New]
- Kernel patches for security and stability
- Bluetooth earpiece WIP
- HAL changes WIP
Known Bugs
- Home button may not respond when charging on power off state
- Good Camera but is quite glitch when changing front and rear camera
- VOIP is Stable + Bluetooth [NO VOI+LTE]- Sms Bug
Fixed Issue
- Fingerprint is refined
- Performance is smoother than Jelly
1.Thanks to : @RaymanFX @andrew.mackew @erickwill
Dear Members, Submit me any bugs you find and i will post It
2. Builds for CM14 (Android N ) will also be posted here Cheers
Can you please use a different naming scheme for the builds listed under 'Post 216 and Future'? It suggests that these builds are from the original author of the thread when they're not.
JohnFlowerful said:
Can you please use a different naming scheme for the builds listed under 'Post 216 and Future'? It suggests that these builds are from the original author of the thread when they're not.
Click to expand...
Click to collapse
Alright, in the future
Thanks
Nice initiative, just a remind.. I'm not the dev.. you should include @erickwill instead of me. I'm just sharing erickwill's roms
Note 4 exynos cm updates. Pls change it in 910C or something.
Would be great to includes the U variant as well. And H or what ever it is ?
I think C is usable for H as well? Not sure.
Can I use roms from F, C, H on a Verizon 910V? Even if bootloader is unlocked and rooted? Thanks
jazzdglass said:
Can I use roms from F, C, H on a Verizon 910V? Even if bootloader is unlocked and rooted? Thanks
Click to expand...
Click to collapse
No you can't, your variant uses a Snapdragon processor (US variants, including Verizon's), and the other uses a Exynos, they aren't compatible at all
fleepant said:
No you can't, your variant uses a Snapdragon processor (US variants, including Verizon's), and the other uses a Exynos, they aren't compatible at all
Click to expand...
Click to collapse
Any suggestion or solution to fix sms not sent error?
hi eddieleon7pc ,
i have installed build 18 , now my battery drains faster before .when i go to battery settings its says ''error'' application stoped. is there anyone help me , how can i fix that issue you ?.
n910c /6.0.1 /ARM/ Mali-T760/ kernel version: 3.10.9-g997d49e-dirty(0dd0817b1f)
I was not able to flash this ROM on my note4 910h
( [6.0.1][TW][N910C/H/U] Hani Base v1.01 [18-04-2016])
http://forum.xda-developers.com/note-4/development/rom-hani-base-t3355958
Having latest TWRP 3.0.2.0. wiped Data, System, cache and dalvik.
Please help me to get CM 13 on my note 4.
hi
i installed built 18 on my smn910c
i have problem with camera , it crashes ,
also msot important with LTE ,, after a period of time my phone stops having internet connection unless i reboot my phone.
lte is really important to me.
thanks.
45gen said:
hi eddieleon7pc ,
i have installed build 18 , now my battery drains faster before .when i go to battery settings its says ''error'' application stoped. is there anyone help me , how can i fix that issue you ?.
n910c /6.0.1 /ARM/ Mali-T760/ kernel version: 3.10.9-g997d49e-dirty(0dd0817b1f)
Click to expand...
Click to collapse
Did you dirty flash?
hg3 said:
i installed built 18 on my smn910c
i have problem with camera , it crashes ,
also msot important with LTE ,, after a period of time my phone stops having internet connection unless i reboot my phone.
lte is really important to me.
thanks.
Click to expand...
Click to collapse
Submit logcat to the dev
srk_srinivas said:
I was not able to flash this ROM on my note4 910h
( [6.0.1][TW][N910C/H/U] Hani Base v1.01 [18-04-2016])
http://forum.xda-developers.com/note-4/development/rom-hani-base-t3355958
Having latest TWRP 3.0.2.0. wiped Data, System, cache and dalvik.
Please help me to get CM 13 on my note 4.
Click to expand...
Click to collapse
Submit to the dev he will sort this out
eddieleon7pc said:
Did you dirty flash?
Click to expand...
Click to collapse
clean everything , just upload build 19 . my battery still drains faster before and excessive warming.
You should add SMS sent prompt error to known bugs category. It's a bit annoying and may be confusing for new users.
Wysłane z mojego SM-N910C przy użyciu Tapatalka
Has the sms bug fixed yet?
BiG tHaNkS
Hello @eddieleon7pc
thanks 4 ur big work ^_^
We r w8ing 4 ur updates & fixes
aref73 said:
Hello @eddieleon7pc
thanks 4 ur big work ^_^
We r w8ing 4 ur updates & fixes
Click to expand...
Click to collapse
Coming right up
Stay awesome m8
Gracias! Mucho mejor que la oficial! Como instalo la actualización?
Sent from my SM-N910C using XDA-Developers mobile app
Related
CyanogenMod 12.1 is a free, community built distribution of Android 5.1 (Lollipop) which greatly extends the capabilities of your phone.
Here is unofficials builds of CyanogenMod 12.1 for Nexus 4 (mako).
How to get this ?
You need the last .zip package : https://www.damien-boyer.com
GoogleApps 5.1.X (minimal) by jajb : https://www.androidfilehost.com/?fid=95916177934545542
Progress of the Project:
10 Nov : Initial Release
13 Nov : Re-sync. Blackscreen at firstboot is now fixed.
18 Nov : Re-sync. Android-5.0.0_r2 to Android-5.0.0_r6.
23 Nov : Re-sync. Android-5.0.0_r6 to r7. Add Trebuchet & CM File Manager.
12 Dec : Re-sync. 5.0 to 5.0.1 and a lot of new things.
20 Dec : Re-sync. 5.0.1 to 5.0.2.
28 Dec : Clean Re-sync. Check the cm changelog to have an idea.
04 Jan : Re-sync. Add Terminal apps and other things.
28 Mar : CyanogenMod 12.1 (Android 5.1.0_r1).
05 Apr : Re-sync cm-12.1 branch, check the gerrit. (Android 5.1.0_r3)
14 Apr : Re-sync. (Android 5.1.0_r5)
27 Nov : Begin of the work on M
What it looks like ? (Please send me your cm12.1 screenshots)
How can I install it ?
1. Copy the ROM and the Gapps in your device
2. Reboot in recovery (TWRP or CWM)
3. Wipe
4. Flash the ROM
5. Flash the Gapps
6. Reboot
7. Enjoy the ROM
XDAevDB Information
CyanogenMod 12.1 for Google Nexus 4 - mako, ROM for the GOOGLE Nexus 4.
Source Code:https://github.com/CyanogenMod/android/tree/staging/cm-12.1
Blobs:https://github.com/TheMuppets
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Created 2014-11-10
Last Updated 2015-04-05
Big THX downloading and flashing ??
Gesendet von meinem Nexus 4 mit Tapatalk
oh many thx.. will try in few hours and report !!
Great! Thanks for this, any noticeable bug ?
Source?
OMG!!! Are you kidding me???
It's similar an AOSP roms, or have some extras like CM11 (volume rocker, bla bla bla)
CM 12? woooooooooooow
LeoPosas said:
Great! Thanks for this, any noticeable bug ?
Source?
Click to expand...
Click to collapse
No bugs founded.
Source : https://github.com/CyanogenMod/android
CM12? Have to try it, downloading.
Give more info man
The Zel said:
Give more info man
Click to expand...
Click to collapse
What you want to know ?
This is correct branch:
https://github.com/CyanogenMod/android/tree/cm-12.0
OP, put it in your first post
AndroGeek974 said:
What you want to know ?
Click to expand...
Click to collapse
Stock ROM or it has CM features?
autoradio78 said:
This is correct banch:
https://github.com/CyanogenMod/android/tree/cm-12.0
OP, put it in your first post
Click to expand...
Click to collapse
Thanks
AndroGeek974 said:
What you want to know ?
Click to expand...
Click to collapse
Is there a battery drain?
sidnoit22 said:
Stock ROM or it has CM features?
Click to expand...
Click to collapse
CM features
mladenovic73 said:
Is there a battery drain?
Click to expand...
Click to collapse
Battery's life looks the same of the aosp
DSP manager too?
alexandreantunez said:
DSP manager too?
Click to expand...
Click to collapse
What about kernel,can we use unlished kernel?
alexandreantunez said:
DSP manager too?
Click to expand...
Click to collapse
Yes
mladenovic73 said:
What about kernel,can we use unlished kernel?
Click to expand...
Click to collapse
I've just tested the basic kernel
CyanogenMod 12.1 for Xiaomi Redmi Note 3 Snapdragon version
Hi all,
This is a initial WIP CyanogenMod 12.1 for Redmi Note 3. It's a basic initial release and does have some bugs accompanied.
It's kind of usable build for those whom fingerprint doesn't matter
What works ?
Camera
Audio
RIL
Wifi
Bluetooth
Other basic stuff
What doesn't ?
Fingerprint
Other misc stuff that i might have not tested completely
Downloads:
Cm12.1 for Redmi Note 3 (30/03/2016)
Just a request to users :
Please don't mirror the ROM anywhere, as I need to keep track of downloads. Also avoid posting the direct download link in comments. Please use the download link I have put up in the OP.
Requirements to flash :
You need to have a unlocked bootloader to flash this in case anyone is going to flash
You need to have TWRP installed after that
You also need to wipe data
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Xiaomi Redmi Note 3
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/android_kernel_8952
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Beta Release Date: 2016-03-30
Created 2016-03-28
Last Updated 2016-05-21
Reserved
Reserved
Use some libs of this rom : http://forum.xda-developers.com/redmi-note/general/rom-qualcomm-base-rom-redmi-note-3-pro-t3346350
Naphtha said:
Use some libs of this rom : http://forum.xda-developers.com/redmi-note/general/rom-qualcomm-base-rom-redmi-note-3-pro-t3346350
Click to expand...
Click to collapse
Oh wow, is that possible? that would be great if you could do that. I never thought we could get cm 12.1 this quickly!
The recovery version of the aosp qualcomm rom. https://744c9d.lt.yunpan.cn/lk/cqKfQ258rvd8Z
Windslash31 said:
The recovery version of the aosp qualcomm rom. https://744c9d.lt.yunpan.cn/lk/cqKfQ258rvd8Z
Click to expand...
Click to collapse
And what can we do with that?
Do you mean you can flash it in recovery?
DrWillz said:
And what can we do with that?
Do you mean you can flash it in recovery?
Click to expand...
Click to collapse
Yes, it's flashable in recovery.
If someone can download it and upload it to Mega or Androidfileshost please, I can download it but at 15kb/s
Here is the mega link
https://mega.nz/#!bldGhI7b!PMiMnZCYSwXpdfTouuuE2F9MZPbPUqCNjfuz4FIP3ts
Awesome Santosh, Appreciate your time.
Update :
Fixed audio today
Santhosh M said:
Update :
Fixed audio today
Click to expand...
Click to collapse
Nice! I'll give it a go soon
New build released (29/03/2016)
Fixes audio
Settings->security fc
Please do note that this is very much a alpha build and not for a normal user
Regards
Santhosh
Thanks For Working on the project
hello ,This firmware is for redmi note 3, then everything works and the developer has created an application for fingerprint. Try to scratch firmware and library workers to take. http://4pda.ru/forum/index.php?showtopic=716960&view=findpost&p=46650108
Molniya said:
hello ,This firmware is for redmi note 3, then everything works and the developer has created an application for fingerprint. Try to scratch firmware and library workers to take. http://4pda.ru/forum/index.php?showtopic=716960&view=findpost&p=46650108
Click to expand...
Click to collapse
Yeah I think that's for MediaTek
I have wifi working now New build with wifi should be up today
Santhosh M said:
I have wifi working now New build with wifi should be up today
Click to expand...
Click to collapse
Libs of Qualcomm rom are working?
Inviato dal mio kenzo utilizzando Tapatalk
Naphtha said:
Libs of Qualcomm rom are working?
Inviato dal mio kenzo utilizzando Tapatalk
Click to expand...
Click to collapse
My base is only stock ROM of my device ( global stable )
I have also got RIL and bluetooth working
Should be a fairly usable build now
Santhosh M said:
My base is only stock ROM of my device ( global stable )
I have also got RIL and bluetooth working
Should be a fairly usable build now
Click to expand...
Click to collapse
Woop
Thanks for this great work. You have a link to some generic kernel source in the OP (for the Snapdragon chipset) but then you are talking about using the global stable kernel?
Have you looked at using the Qualcomm 'test' AOSP kernel?
As that version has a working kernel and the all the propeitary libs you could need I would imagine (other than a way of configuring the fingerprint reader - it does have a fingerprint service running - but no settings for adding a fingerprint - I see Fingerprint support is only being added to CM13 so we might have to wait ).
I am currently using that ROM (as I don't like MIUI) and can post a list of the /system folder if you are interested.
CyanogenMod 13.0 for Xiaomi Redmi Note 3 Snapdragon version
What works ?
Audio
Wifi
Bluetooth
Camera
RIL
GPS
FM
Fingerprint
What doesn't ?
Stuff that i might have not noticed
Changelogs :
02/09/2016
- Sync with latest CM ( includes off screen charging mode animation, default Hexalibre CM theme package,etc etc)
- Switched to newer radio blobs
- Other minor device cleanups
( Been hell busy & if i have time i will work on CM14 (android N), but at the moment i am not working and hence don't expect any immediate cm14 builds)
05/08/2016
- Sync with latest CM
- My non CM features retained as such
- Support for goodix fingerprint users ( Make sure to flash ROM followed by fp patch. Normal users for whom fingerprint used to work don't need to flash the patch)
- Loads of device cleanup
- Other minor improvements
Older Changelogs
18/07/2016
- Fix settings->security fc caused due to 15/07 build
15/07/2016
- F2fs implemented ( on /data and /cache ) => tested working
- Sync with latest cm
- Pokemon go mock location hack
- Other improvements
- Previous non CM features retained as such
05/07/2016
- Sync with latest CM
- GPS improvements
- Reduce headphone noise
- F2FS support is added (but i doubt it will boot[might be stuck in bootanim], as i didn't make a clean build) [ Try at your own risk if you know how to flash f2fs rom[you need a f2fs twrp recovery], if you don't know just flash ROM like always ]
- Previous non CM features retained as such
- Some cleanup and other performance improvements
Downloads:
Latest builds
For flashing the latest build which is based on M firmware checkout the guide here
If you face camera FC just flash this patch [ not applicable to f2fs users if they have switched to f2fs ]
Just a request to users :
Please don't mirror the ROM anywhere.Also avoid posting the direct download link in comments. Please use the download link I have put up in the OP.
Requirements to flash :
You need to have a unlocked bootloader to flash this in case anyone is going to flash
You need to have TWRP installed after that
You also need to wipe data
XDA:DevDB Information
CyanogenMod 13.0, ROM for the Xiaomi Redmi Note 3
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/android_kernel_xiaomi_kenzo
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Stable Release Date: 2016-09-02
Created 2016-04-02
Last Updated 2016-09-02
Reserved
Thanks to the following donators :
@Tig3ro
@sffoxy
@FrozenMindXXIII
@gap30
@t3chs0l0
@dmahtani
@badm0j0
If someone wishes to thank for my work and donate, choose the option of services/goods in paypal ( as I am a Indian user ) and the donation will go through. [ The minimal withdrawal amount for paypal indian user is 10$. Just FYI. Lesser amounts than that get stagnated in the account until the paypal balance reaches 10$ ]
Wow! So fast) Thank you.
Good luck with the further work on ROM.
And the awesomeness begins!!
Can you release the device and vendor. I want to help you.
Gửi từ kenzo của tôi bằng cách sử dụng Tapatalk
Awesome, CM13 so quickly...!
Sent from my kenzo using Tapatalk
Good job.
Sent from my Redmi Note 3 using Tapatalk
Good job
Good job!!!
Keep up the good work!!!
Nice..
Sent from my Redmi Note 3 using Tapatalk
Nice! Good to see cm13 this early on this device, good luck with the development!
Shared this thread on Miui's forum, hope you don't mind.
Good Work
Sent from my Redmi Note 3 using XDA-Developers mobile app
Official?
Awesome! One step closer to the approval to get OFFICIAL CyanogenMod... (dreaming is free)
Can someone upload screenshots of this ROM?
Awesome!!! I knew it was a great idea to invest in a phone with a Snapdragon processor, Keep up the good work!
WOW, already? The amount of developer support this phone has received in such a short time is amazing. Thanks for your hard work Santhosh, I'll definitely be trying this out.
---------- Post added at 01:59 PM ---------- Previous post was at 01:23 PM ----------
For some reason the DPI defaults to 240, shouldn't it be 480?
DrWillz said:
WOW, already? The amount of developer support this phone has received in such a short time is amazing. Thanks for your hard work Santhosh, I'll definitely be trying this out.
---------- Post added at 01:59 PM ---------- Previous post was at 01:23 PM ----------
For some reason the DPI defaults to 240, shouldn't it be 480?
Click to expand...
Click to collapse
I am looking to fix that same "some reason"
Build.prop
Santhosh M said:
I am looking to fix that same "some reason"
Click to expand...
Click to collapse
Can you fix it editing build.prop?
The fingerprint sensor is working?. I know that in M the fingerprint is supported by default.
yassineak47 said:
The fingerprint sensor is working?. I know that in M the fingerprint is supported by default.
Click to expand...
Click to collapse
No it doesn't. You guys misunderstand how this works
For every piece of hardware in Android you need three things
A kernel driver (we have that), a matching hal for the system's API, and service / client software that interfaces with the hal
Sadly we are missing the hal
The only hal in existence is that of xiaomi but it's a selfcooked API which most likely needs some wrappers around it to work with stock 6.0 as it lacks user management
Whenever people say Android 6 has built in support for FP readers they mean that Google established a standard API for OEMs to build hals from.
That doesn't mean that all systems now magically start having their FP readers work
CyanogenMod 14.0/14.1 for Xiaomi Redmi Note 3 Snapdragon version
Hi all,
This is a initial WIP cyanogenmod 14.1 build based on nougat. Since cm is very much in alpha stage there are bound to be lot of cm related bugs and device related bugs as well. Flash only if you want to.
What works ?
Wifi
Bluetooth
Audio
Camera
RIL
GPS
Fingerprint
Other basic things
What doesn't ?
CM related features or anything that's out of my scope and in CM scope
Goodix fingerprint should not be working ( not tested yet )
Stuff that i might have not noticed
Changelogs :
16/11/2016:
Sync with latest CM source (android_7.1.0_r7 and latest CM stuff)
Note : Cm has added Reliance jio apn by default now to their apn list and there seems to be a small bug related to this. So check your apn properly if data connection isn't working in Jio ( I had to modify APN type to default,supl on my personal usage)
Older Changelogs :
Note : I would recommend a clean flash of 05/11/2016 build as CM has database upgradation issue due to which you might face sim detection issue if dirty flashed
05/11/2016:
Sync with latest CM source.
Night display (accessed via quick tiles) is a addition from my end and is not a default CM feature
30/10/2016:
Initial CM14.1 release (please be noted that cm14.1 features might malfunction / totally nonworking )
Sync with latest CM
( VoLTE continues to work on a dirty flash if you were on my previous build) [ I just wiped cache and dalvik ]
17/10/2016 :
Sync with latest CM (some CM features work now)
Video recording should work fine now ( I recorded a couple of videos and captured few images. All look fine )
Initial blob level ( library support in ROM ) support for new camera sensors ( Kernel might still lack one or two new sensors )
Flac support
Improved device level performance
Other minor improvements
05/10/2016:
Sync with latest CM ( not much feature side, button backlight works nowthough)
VoLTE should now work out of the box. You don't need to flash tonnes of firmware zips ( Make sure you are clean flashing )
Camera fixes (Photo capture will work perfectly fine and won't crash anymore. Video recording is not still fully functional/functional totally)
Slightly improved performance and battery stability
Other misc changes
21/09/2016:
Sync with latest CM
Fixed the lags (device is smooth and normal now)
CM side issues such as external sd permission fixed ( fixed from cm side)
18/09/2016:
VoLTE support
Initial goodix support ( not tested yet and might be broken most likely. If u are going to test goodix flash my latest cm13 build and then come over to this rom )
Battery % bug fix ( -2%,50% thingy) [ I couldn't test because i have a older hardware]
Sync with latest CM
Minor improvements
13/09/2016 :
Sync with latest CM
Camera (photo capture) for other sensors
Night mode ( Access it from systemui tuner)
Should fix some performance issues ( make sure to switch to interactive after first boot)
other minor device level cleanups
Downloads:
Latest build (16/11/2016)
Requirements to flash :
You need to have a unlocked bootloader to flash this in case anyone is going to flash.
You need to have TWRP installed
You also need to wipe data and install ROM followed by gapps
XDA:DevDB Information
CM14.1 for Xiaomi Redmi Note 3, ROM for the Xiaomi Redmi Note 3
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/android_kernel_xiaomi_kenzo
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Beta Release Date: 2016-11-16
Created 2016-09-11
Last Updated 2016-11-16
Screenshots & other info
Reserved
Woow nice downloading
Reserved
Great work mate. Keep the good work going
Thanks a lot was waiting for it
---------- Post added at 08:53 AM ---------- Previous post was at 08:53 AM ----------
Will test and report
Will try soon thank youuu
Sent from my Redmi Note 3 using Tapatalk
thank you bro .....
Thanks for this Work, I will test soon !
@Santhosh M android.phone.com fc on few sims
HOW TO FLASH AND A QUICK REVIEW :
anyone flash? screenshot please...thx...
Thank you!
Reserved
Sent from my Redmi Note 3 using Tapatalk
Here is the step by step tutorial video on how to install ANDROID NOUGAT 7.0 on redmi note 3 with a quick review
https://youtu.be/x1Fo8hogOdU
nice
Reserved
Great news...
A little bit laggy, but it works! Very good job for being an alpha build...
Thanks and regards!!
Santhosh M said:
CyanogenMod 14.0 for Xiaomi Redmi Note 3 Snapdragon version
Hi all,
This is a initial WIP cyanogenmod 14 build based on nougat. Since cm is very much in alpha stage there are bound to be lot of cm related bugs and device related bugs as well. Flash only if you want to.
What works ?
Wifi
Bluetooth
Audio
Camera (only photo capture as of now, video rec is broken)
RIL
GPS
Fingerprint
Other basic things
What doesn't ?
Video recording
Photo capture on some rn3 devices ( My kernel doesn't yet support all camera sensors and only supports initial batch as of now)
CM related features or anything that's out of my scope and in CM scope
Stuff that i might have not noticed
Downloads:
Latest build (11/09/2016)
Requirements to flash :
You need to have a unlocked bootloader to flash this in case anyone is going to flash.
Also you need to be on latest M firmware to flash the ROM.
You need to have TWRP installed
You also need to wipe data and install ROM followed by gapps
XDA:DevDB Information
CM14 for Xiaomi Redmi Note 3, ROM for the Xiaomi Redmi Note 3
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/android_kernel_xiaomi_kenzo
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Alpha
Beta Release Date: 2016-09-11
Created 2016-09-11
Last Updated 2016-09-11
Click to expand...
Click to collapse
Thank you man for your hard work.
Do you plan to release a device tree?
awesome!
Sent from my Redmi Note 3 using Tapatalk
Reserved
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 09:12 AM ---------- Previous post was at 09:11 AM ----------
tank0412 said:
Thank you man for your hard work.
Do you plan to release a device tree?
Click to expand...
Click to collapse
Obviously not?
Sent from my Redmi Note 3 using Tapatalk
Hello
I decided to rebuild LineageOS 13 with the latest security patch.
Everything is based on AD2076 and nexolight's work. I haven't actually fixed anything myself. (Also thanks for haky 86 to get me started on this!)
Downloads links:
Build 1 - 9/2017 patch (tested, working)
Build 2 - 10/2017 patch (tested, working)
Build 3 - 2/2018 patch (tested, some heat/battery issues are possible. Not sure)
Coming today - 2/18
You should use boot.img from here
- (format system, data, cache and dalvik cache) if coming from other rom than CM/Lineage
- (sudo) fastboot flash boot boot.img
- (sudo) fastboot flash system system.img
If you experience battery drain try to disable nfc and location. With those disabled I often get a whole day of battery - not significantly worse than emui.
Also, as always, I'm not responsible for any damage. Take a nandroid backup before proceeding.
Thanks ! Works fine with me without wiping data from lineageOS 13.
February build is now done.
Today I'll continue LineageOS 14.1 project
T1mb3 said:
February build is now done.
Today I'll continue LineageOS 14.1 project
Click to expand...
Click to collapse
Link to more info?
thaaanks for your work!
T1mb3 said:
February build is now done.
Today I'll continue LineageOS 14.1 project
Click to expand...
Click to collapse
Tested on Huawei UL00, Region Latin America, The only problem is that it heats up when using it, and the battery drain, and I have a query, how do I record videos? (Written using translator)
I had a lot of heatproblems and batterydrain today. GPS was turned on, so there is an heat/batteryproblem in februari build. It's very nice you bring new updates to this phone. I can test Android N when you're ready. Me and so much other users would be glad to get Android N!
nie nagrywa kamera
witam ma ktoś może soft do aparatu w moim P8 GLAL09 nie nagrywa kamera w cianogenie
franccom said:
witam ma ktoś może soft do aparatu w moim P8 GLAL09 nie nagrywa kamera w cianogenie
Click to expand...
Click to collapse
I think this is English only -forum.
T1mb3 said:
I think this is English only -forum.
Click to expand...
Click to collapse
Franccom speak "can you have soft camera? Recording in cyanogenmod don't work
Naleśnik115 said:
Franccom speak "can you have soft camera? Recording in cyanogenmod don't work
Click to expand...
Click to collapse
What is soft camera?
If you want to record videos, try footej.
T1mb3 said:
What is soft camera?
If you want to record videos, try footej.
Click to expand...
Click to collapse
I don't know, I only translate this post.
First booting build of 14.1 is now done.
Few days/weeks and I will propably release something
T1mb3 said:
First booting build of 14.1 is now done.
Few days/weeks and I will propably release something
Click to expand...
Click to collapse
Great news, I'm already impatient....
At least screen recording works in 14.1
Hello, I've also a GRA 09 with Magic Arrow rom, your l'OM look very interesting, anyway, I'm wondering sometimes, your Lineage OS 14.1 rom is based on which version of Android ? 7.1 or 6.0 ? Because it seemed impossible to update this phone at anything after 6.0.
Anyway, thanks for your hard work, I really like it =)
Syrusse said:
Hello, I've also a GRA 09 with Magic Arrow rom, your l'OM look very interesting, anyway, I'm wondering sometimes, your Lineage OS 14.1 rom is based on which version of Android ? 7.1 or 6.0 ? Because it seemed impossible to update this phone at anything after 6.0.
Anyway, thanks for your hard work, I really like it =)
Click to expand...
Click to collapse
Lineage 14.1 is based on Android Nougat (7)
beardedwonder said:
Lineage 14.1 is based on Android Nougat (7)
Click to expand...
Click to collapse
Sure, I know that, but I thought that the kernel needed to be updated for updating Android version, that impress me as I tought that it needed a lot of knowledge about Android
Goood news ?
Syrusse said:
Sure, I know that, but I thought that the kernel needed to be updated for updating Android version, that impress me as I tought that it needed a lot of knowledge about Android
Click to expand...
Click to collapse
Less than you would quess.
At least when you have others helping..:highfive:
T1mb3 said:
First booting build of 14.1 is now done.
Few days/weeks and I will propably release something
Click to expand...
Click to collapse
Is the overheaing problem gonna be fixed in 14.1?