Database Develop

[Q] Sony Xperia T LT30P hard bricked?

Hi i have Xperia T which was fully working and my friend tries to make downgrade with Flashtool... i don't know exacly what he has done i'm trying to get it back alive but Setool didn't recognise the phone original update program also when i connect it to USB it is recognised by pc as Zeus Flash device on other computer as qualcoomm device any idea how i can unbrick it? i have to add pc recognise the phone without pushing any button with volume down or up is the same it is recognised also when i disconnect the battery when i tries to power it up nothing happens please help!!

biegan said:
Hi i have Xperia T which was fully working and my friend tries to make downgrade with Flashtool... i don't know exacly what he has done i'm trying to get it back alive but Setool didn't recognise the phone original update program also when i connect it to USB it is recognised by pc as Zeus Flash device on other computer as qualcoomm device any idea how i can unbrick it? i have to add pc recognise the phone without pushing any button with volume down or up is the same it is recognised also when i disconnect the battery when i tries to power it up nothing happens please help!!
Click to expand...
Click to collapse
calm down. Follow the instrctions in the third thread in the general section about how to recover froma soft brick. Its here
Follow those instructions and post here if you have any problems. Preferably with screen shots of what your PC/Phone is doing.

gregbradley said:
calm down. Follow the instrctions in the third thread in the general section about how to recover froma soft brick. Its here
Follow those instructions and post here if you have any problems. Preferably with screen shots of what your PC/Phone is doing.
Click to expand...
Click to collapse
I will describe what programs showing because i have polish version and maybe you can't understand them:
When i'm trying to connect to pc companion when pc recognise phone i'm geting message PC companion could not connect with device disconnect device and try again
When trying do sof/hard reset nothing happens
When trying to pull in fastboot or flash mode pc recognise phone always the same in conrtol panel ZEUS FLASH device pc also recognise in thisa mode without battery and without pushing any buttons but i'm not geting any led Green or blue only when i'm conecting charger or usb cable WITHOUT battery it blinks red ones
When i'm trying to flash with flashtool or original update service when program is on screen asking me to connect the device i plug usb pc recognising the phone (usb connected device sound) but program doesn't start to flash or even recognise
i have also setool when i'm trying to flash by setool when program is waiting for device connecting bar is moving on down side of window when i connect the phone it is stoping like it tries to connect but nothing happens....
i was thinking to try this but i have cheked battery voltage and it is 3,88 so i thing it is fully charged:
Here are the steps I took successfully revise my phone from soft brick.
Let the phone charge (long long time = 4+ hrs) on wall charger.
Red light on (constantly - not flashing) - charge until red light off (again very long time =16+ hrs)
Unplug from wall
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
While hold volumn down and plug in USB
Red light will be back on, after a few seconds - flash will run.
Unplug USB then power on - phone will boot and die (it's okay don't worry)
Charge the phone again - after a while (or let it charge full), you can now turn on the phone.
That is all ... Back and running.
GOOD Luck.
Timing = could be different from phone to phone - depends on battery of the phone before it dead.
please do you have any idea? for me it hangs in some kind of boot mode and i don't know how to kick it fromthis and reflash if any screens can help please tell me i will do them

biegan said:
I will describe what programs showing because i have polish version and maybe you can't understand them:
When i'm trying to connect to pc companion when pc recognise phone i'm geting message PC companion could not connect with device disconnect device and try again
When trying do sof/hard reset nothing happens
When trying to pull in fastboot or flash mode pc recognise phone always the same in conrtol panel ZEUS FLASH device pc also recognise in thisa mode without battery and without pushing any buttons but i'm not geting any led Green or blue only when i'm conecting charger or usb cable WITHOUT battery it blinks red ones
When i'm trying to flash with flashtool or original update service when program is on screen asking me to connect the device i plug usb pc recognising the phone (usb connected device sound) but program doesn't start to flash or even recognise
i have also setool when i'm trying to flash by setool when program is waiting for device connecting bar is moving on down side of window when i connect the phone it is stoping like it tries to connect but nothing happens....
i was thinking to try this but i have cheked battery voltage and it is 3,88 so i thing it is fully charged:
Here are the steps I took successfully revise my phone from soft brick.
Let the phone charge (long long time = 4+ hrs) on wall charger.
Red light on (constantly - not flashing) - charge until red light off (again very long time =16+ hrs)
Unplug from wall
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
While hold volumn down and plug in USB
Red light will be back on, after a few seconds - flash will run.
Unplug USB then power on - phone will boot and die (it's okay don't worry)
Charge the phone again - after a while (or let it charge full), you can now turn on the phone.
That is all ... Back and running.
GOOD Luck.
Timing = could be different from phone to phone - depends on battery of the phone before it dead.
please do you have any idea? for me it hangs in some kind of boot mode and i don't know how to kick it fromthis and reflash if any screens can help please tell me i will do them
Click to expand...
Click to collapse
I want to add when i'm trying to connect for example SE ARC it is recognised as SEMC Flash Device and all programs recognising it

biegan said:
I want to add when i'm trying to connect for example SE ARC it is recognised as SEMC Flash Device and all programs recognising it
Click to expand...
Click to collapse
I forgot to add when i'm doing test point to unlock for example ARC it is also recognised as ZEUS Flash so i thing it stays in some king of boot mode but there is no information in the net how to kick it out or even do jtag because i can doit also but i think it is not supported yet

You have an xperia T, then how can you connect the phone to the PC WITHOUT a battery? It is not removable in the Xperia T!
Have you flashed anything to the device before this happened?
EDIT
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
Click to expand...
Click to collapse
Which firmware is .111? I dont beleive there has ever been a .111 firmware for the T? Can you give me the post you found that in and the download link, thanks

gregbradley said:
You have an xperia T, then how can you connect the phone to the PC WITHOUT a battery? It is not removable in the Xperia T!
Have you flashed anything to the device before this happened?
EDIT
Which firmware is .111? I dont beleive there has ever been a .111 firmware for the T? Can you give me the post you found that in and the download link, thanks
Click to expand...
Click to collapse
i disassemble the back cover it's very simple the battery connector is on the flex cable i know what i'm talking if you want i can send pics i'am using flashifile LT30p_7.0.A.1.303_CH the most important think that no program is detecting the phone only pc recognising the phone

biegan said:
i disassemble the back cover it's very simple the battery connector is on the flex cable i know what i'm talking if you want i can send pics i'am using flashifile LT30p_7.0.A.1.303_CH the most important think that no program is detecting the phone only pc recognising the phone
Click to expand...
Click to collapse
OK,
Yes thats true but it sounds similar to a problem I have come across before. But this happened when someone flashed the S1 update on the TX instead of the T.
Have you unistalled evrything android/sdk/adb related from your computer and started again.
Also, you can try another machine.
Are you on win8? That has issues with drivers from Sony.

gregbradley said:
OK,
Yes thats true but it sounds similar to a problem I have come across before. But this happened when someone flashed the S1 update on the TX instead of the T.
Have you unistalled evrything android/sdk/adb related from your computer and started again.
Also, you can try another machine.
Are you on win8? That has issues with drivers from Sony.
Click to expand...
Click to collapse
Hi no i didn't try i always use XP for software problems with phones i don't knoiw exacly what he did with the phone you think when i try to do it on clean system should help? i tried on 2 computers and problem is the same i think to general problem is that computer recognising the phone like a ZEUS FLash not SEMC Flash device i think somehow he erase whole flash or write from other model and now i can't do anythink

biegan said:
Hi no i didn't try i always use XP for software problems with phones i don't knoiw exacly what he did with the phone you think when i try to do it on clean system should help? i tried on 2 computers and problem is the same i think to general problem is that computer recognising the phone like a ZEUS FLash not SEMC Flash device i think somehow he erase whole flash or write from other model and now i can't do anythink
Click to expand...
Click to collapse
Yes, it sounds like your friend has done something silly to the phone. Untill we know exactly what he did, and what he tried to flash we are just guessing...

gregbradley said:
Yes, it sounds like your friend has done something silly to the phone. Untill we know exactly what he did, and what he tried to flash we are just guessing...
Click to expand...
Click to collapse
All i know he told me he tries to downgrade the phone to make a root and he was using flashtool is there any other methods/programs which can flash lt30p? i have all service boxes like riff box setool but riff don't make it setool can't start flashing i don't know any testpoint or jtag?

biegan said:
All i know he told me he tries to downgrade the phone to make a root and he was using flashtool is there any other methods/programs which can flash lt30p? i have all service boxes like riff box setool but riff don't make it setool can't start flashing i don't know any testpoint or jtag?
Click to expand...
Click to collapse
I dont know where testpoint is on xperia T as we have never been down that road here.
Has he tried to use EMMA to flash something? That is meant only for unlocked bootloaders, maybe he has messed up with that, but I am onl guessing here and i cant really see why that would do anything to the boot...
Maybe he tried to flash it, dropped it, broke it, and thinks a software hack can help him....

gregbradley said:
I dont know where testpoint is on xperia T as we have never been down that road here.
Has he tried to use EMMA to flash something? That is meant only for unlocked bootloaders, maybe he has messed up with that, but I am onl guessing here and i cant really see why that would do anything to the boot...
Maybe he tried to flash it, dropped it, broke it, and thinks a software hack can help him....
Click to expand...
Click to collapse
No it is 100% software problem he is noob in this and all he told me he trried to root the phone but first he tried to downgrade it with flashtool but if flashtool doens't recognise the phone setool also do you think there is any other option?

biegan said:
No it is 100% software problem he is noob in this and all he told me he trried to root the phone but first he tried to downgrade it with flashtool but if flashtool doens't recognise the phone setool also do you think there is any other option?
Click to expand...
Click to collapse
Not that I know of. Bin4ry is someone who has experience with setool and may be able to help. Try PM'ing him.
Sorry I couldnt be of much more use.

gregbradley said:
Not that I know of. Bin4ry is someone who has experience with setool and may be able to help. Try PM'ing him.
Sorry I couldnt be of much more use.
Click to expand...
Click to collapse
Thanks bro anyway for your help!!

any update about your device...
i have exactly same problem as you mentioned but my device is Xperia V (LT25i)....
waiting for your reply. please do update.

I also had the same problem, my cell phone xperia v. .. please help me .... What can I do now?

bambox said:
I also had the same problem, my cell phone xperia v. .. please help me .... What can I do now?
Click to expand...
Click to collapse
what have you already done to try and fix it?
What did you do to make it not work?
What are the symptoms of your phone?

gregbradley said:
what have you already done to try and fix it?
What did you do to make it not work?
What are the symptoms of your phone?
Click to expand...
Click to collapse
a week ago I upgraded to 4.1.2, and using kernel vKernel_Xperia_V_1.2.5
after 1 week of use, I reboot my xperia v, but do not want to live anymore, Charging not respont, could not power on, flsahmode and fasbootmode.
my xperia v die, but still 70% battery.
on my pc not detect (only ZEUS FLASH DEVICE)

bambox said:
a week ago I upgraded to 4.1.2, and using kernel vKernel_Xperia_V_1.2.5
after 1 week of use, I reboot my xperia v, but do not want to live anymore, Charging not respont, could not power on, flsahmode and fasbootmode.
my xperia v die, but still 70% battery.
on my pc not detect (only ZEUS FLASH DEVICE)
Click to expand...
Click to collapse
put it on charge for 24 hours and leave it alone.
after the 24 hours turn it on.

[Q] Xperia V Possible Bricked HELLLPPPPP!

Hey people!i need help here!i have an xperia v with bootloader unlocked and last day i flashed an img kernel of cyanogenmod with flashify...all worked good until reboot...when i pressed reboot my phone didn't started anymore.when i try to power up nothing happens no leds no fastboot nothing!what can i do to fix it????please help

sash89 said:
Hey people!i need help here!i have an xperia v with bootloader unlocked and last day i flashed an img kernel of cyanogenmod with flashify...all worked good until reboot...when i pressed reboot my phone didn't started anymore.when i try to power up nothing happens no leds no fastboot nothing!what can i do to fix it????please help
Click to expand...
Click to collapse
Ooops.
Leave the phone off, connect it in fastboot mode (I know you said it did not work, but that might just be the LED, please try it again) and then run this
Code:
fastboot devices
and tell me what it says

Xperia v brick
gregbradley said:
Ooops.
Leave the phone off, connect it in fastboot mode (I know you said it did not work, but that might just be the LED, please try it again) and then run this
Code:
fastboot devices
and tell me what it says
Click to expand...
Click to collapse
no the phone doesnt connect in fastboot mode it shows no led nothing i only see in device manager that there is a
QHSUSB_DLOAD device wich i think is the processor...so what can i do man?and in device manager i see connected qualcomm hs-usb qdloader 9008 (com8)

did you try what I said?

hello greg, hows the z1, hope you enjoy it
thanks for your many many support to all questions here, hope it wasnt that frustrated when people not tried out what you suggested :silly:
to sash89: you unlocked bootloader, and flashed an cm img kernel? that let me comes to another question. you flashed that kernel above a stock rom, or you flashed CM ROM also?

Hi
The Z1 is great, I recommend it.
Yes, it does help if people try things you suggest.

brick
gregbradley said:
did you try what I said?
Click to expand...
Click to collapse
but where i must enter that code?in cmd?or where?

yes, open up a command window where you have adb and fastboot installed on your PC.
If you do not have them installed then download and install this
minimal_adb_fastboot_v1.1.3_setup.exe - 2.12 MB

brick
gregbradley said:
yes, open up a command window where you have adb and fastboot installed on your PC.
If you do not have them installed then download and install this
minimal_adb_fastboot_v1.1.3_setup.exe - 2.12 MB
Click to expand...
Click to collapse
nothing hapened man...it may be a hard brick???if yes what can i do?

sash89 said:
nothing hapened man...it may be a hard brick???if yes what can i do?
Click to expand...
Click to collapse
By definition a hard brick is not recoverable.
OK, try this.
Code:
adb devices
and tell me what that says.
Also, download and install flashtool from the first thread in the dev section. Open the driver folder from the installation path and run drivers.exe. Choose flashmode, fastboot and TX drivers.
Then run flashtool and attach the phone, disconnect and try attaching in flashmode, disconnect and try to attach in fastboot. Then copy and paste the output from flashtool here.
One final thing, try to attach again in flashmode but this time do this.
Press and hold volume up, attach USB cable, keep pressing volume up and now press the power button. Hold both buttons for 10 seconds or until the green LED comes on. Tell me what happens.

brick
gregbradley said:
By definition a hard brick is not recoverable.
OK, try this.
Code:
adb devices
and tell me what that says.
Also, download and install flashtool from the first thread in the dev section. Open the driver folder from the installation path and run drivers.exe. Choose flashmode, fastboot and TX drivers.
Then run flashtool and attach the phone, disconnect and try attaching in flashmode, disconnect and try to attach in fastboot. Then copy and paste the output from flashtool here.
One final thing, try to attach again in flashmode but this time do this.
Press and hold volume up, attach USB cable, keep pressing volume up and now press the power button. Hold both buttons for 10 seconds or until the green LED comes on. Tell me what happens.
Click to expand...
Click to collapse
nothing happens man...no leds showing up no connection to pc...only this is showing up on device manager when i connect phone to pc qualcomm hs-usb qdloader 9008 com8

This is not looking good for you.
Try this link
or this google search
but I have not heard of good things with phones that want that driver. Best of luck and hopefully someone can come up with a solution

sash89 said:
Hey people!i need help here!i have an xperia v with bootloader unlocked and last day i flashed an img kernel of cyanogenmod with flashify...all worked good until reboot...when i pressed reboot my phone didn't started anymore.when i try to power up nothing happens no leds no fastboot nothing!what can i do to fix it????please help
Click to expand...
Click to collapse
Try SUS bro..
http://forum.xda-developers.com/showthread.php?p=45965388
Sent from my C6602 using xda premium

YudiA1 said:
Try SUS bro..
http://forum.xda-developers.com/showthread.php?p=45965388
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
He cannot connect in flashmode, so that wont work, he will have to solve the connection problem before repairing the OS

brick
gregbradley said:
He cannot connect in flashmode, so that wont work, he will have to solve the connection problem before repairing the OS
Click to expand...
Click to collapse
so may i send it to warranty?what are your suggestions guys?

sash89 said:
so may i send it to warranty?what are your suggestions guys?
Click to expand...
Click to collapse
Your warrenty is void because you unlocked the bootloader.

oh one more thought from me. you sure your battery wasnt gone empty while you did flashing stuff?
happened to me one time, restored backup and battery gone empty while in the process. it looked dead too for some time, but wasnt.

brick
immerblind said:
oh one more thought from me. you sure your battery wasnt gone empty while you did flashing stuff?
happened to me one time, restored backup and battery gone empty while in the process. it looked dead too for some time, but wasnt.
Click to expand...
Click to collapse
and what is this meaning man?my battery was something like 18 percent when i flashed...so may the battery be broken?anyway when i put the phone into charge without battery red led flashes for one time...what this means?

when you put charger in, is it loading the battery the usual way like it did before you broke your handy?
also you not answered one of my previous posts, you flashed the CM kernel without flashing any CM rom. you on stock sony rom or on cm when mistake happens?

immerblind said:
when you put charger in, is it loading the battery the usual way like it did before you broke your handy?
also you not answered one of my previous posts, you flashed the CM kernel without flashing any CM rom. you on stock sony rom or on cm when mistake happens?[/QUOTEi was on stock rom man
Click to expand...
Click to collapse

[Q] Doesn´t charge while power off (also no flashmode/fastboot)

Well I explain you my problem.
Since I installed last saturday the last 4.3 ROM thanks to Doomlord, I noticed my phone doesn´t charge while in power off, it just doesn´t respond to the cable charger, I tried with several cables, wall chargers, via PC,... with no result, also looking for a solution I also noticed it doesn´t also respond to comands with volume buttons so it can not boot to flashmode and fastboot using the normal way.
booting to flashmode or Flashmode is not an issue as I found a way of doing it actually a couple of them, I will explain them just in case somebody is in a similar problem than me...
Via software Using flashtool (flash/fastboot) the aplication can force the phone to boot in fastboot via adb, using PCcompanion, (flash/repair) when it checks the phone after downlodaing the firmware it forces the phone to reboot in flashmode (in my case it doesn´t it just powers off and gets stucked but just pressing the power button it does, once booted in flashmode you can open flashtool and flash the desired ROM)
Via Hardware As I said it doesn´t respond when I plug in the cable but with the cable connected to the computer and pressing volume UP/down and power until it vibrates it will boot to flashmode or fastboot.
Now lets go back to my main problem...
I have being doing several things in order to solve it with no luck...
1º flash .278 kernel with recovery thanks to sj8023ld
2º Downgrade to .145 Xperiment custom ROM
3º Downgrade to .141 oficial using flashtool (result bootloader allowed: no" when it was unlocked before)
4º Flash again .141 with flashtool (bootloader again unlocked)
5º relock bootloader and flash with PCcompanion (flash/repair)
6ºFlash .145 oficial using Flashtool
7º Unlock bootloader, Root (easyrooting toolkit Doomlord) and CWM V9 by davidmarco.
Now I am again in 4.3 leaked with root and .278 kernel
After doing all this I couldn´t find a solution, Do you know guys if I can do anything else?
Thanks a lot for your help in advance

All i can get u flashed a rom
u cant accses flashmod nor fastboot
is this is right ?
If so i think u have a problem smiler to mine
let me know

iSpammer said:
All i can get u flashed a rom
u cant accses flashmod nor fastboot
is this is right ?
If so i think u have a problem smiler to mine
let me know
Click to expand...
Click to collapse
How did you solve your problem?
Thanks

onomico said:
How did you solve your problem?
Thanks
Click to expand...
Click to collapse
mine didnt got soloved but i know the software to use to solove it i just want to know
if ur xv dosnt get in fastboot neither on flashmode ? Is ur xv get detected on ur pc under the name qhsusb_dload ? If so tell me so we may can help each other

iSpammer said:
mine didnt got soloved but i know the software to use to solove it i just want to know
if ur xv dosnt get in fastboot neither on flashmode ? Is ur xv get detected on ur pc under the name qhsusb_dload ? If so tell me so we may can help each other
Click to expand...
Click to collapse
No, sorry, when powered on it is recognized as normal and on power off it is not detected at all

I have problems in my stock fw with charging while powered off. Does not at all, quite the inconvenience. However if you hold the power button my charge light comes on until my phone has enough juice to power up (well it doesn't have enough juice ever, but I quickly put into airplane mode till it charges a but more...)
Sent from my LT30a

[Q] Z1 won't turn on

Well i've got this problem with a Xperia Z1 from a friend of mine. It's not powering on. If i press the power button the phone won't turn on. It can enter fastboot but that is everything. The phone is fully charged because that's the only thing that works so far beside the fastboot. It's on stock firmware no custom ROM. Maybe that you people of XDA have the solution i hope so or experienced the same problem and that it is fixable.
Greetings,
Kyrindia

kyrindia said:
Well i've got this problem with a Xperia Z1 from a friend of mine. It's not powering on. If i press the power button the phone won't turn on. It can enter fastboot but that is everything. The phone is fully charged because that's the only thing that works so far beside the fastboot. It's on stock firmware no custom ROM. Maybe that you people of XDA have the solution i hope so or experienced the same problem and that it is fixable.
Greetings,
Kyrindia
Click to expand...
Click to collapse
it is fixable, its very easy: just flash a stock ftf via flashtool. Tutorials can be found here on xda, just google

mo120697 said:
it is fixable, its very easy: just flash a stock ftf via flashtool. Tutorials can be found here on xda, just google
Click to expand...
Click to collapse
Well i've tried that to. But when i plug in the USB cable and press the volume down button it shows the Sony screen and then it goes to charging mode and that's it...... So what coud else be the possible solution? If you want i can make a video of it

kyrindia said:
Well i've tried that to. But when i plug in the USB cable and press the volume down button it shows the Sony screen and then it goes to charging mode and that's it...... So what coud else be the possible solution? If you want i can make a video of it
Click to expand...
Click to collapse
I Had a similar issue, my volume up button got stuck, causing it to always boot in fastboot.
Power up phone, connect to pc, install driver, then run fastboot on your pc and run:
Code:
fastboot continue
Let me know if it helps!

Brainpower said:
I Had a similar issue, my volume up button got stuck, causing it to always boot in fastboot.
Power up phone, connect to pc, install driver, then run fastboot on your pc and run:
Code:
fastboot continue
Let me know if it helps!
Click to expand...
Click to collapse
Thanks for this
Code:
fastboot continue
didn't work but fastboot reboot worked. So i've managed to boot the device and when it was booted. I found out that the power button and the volume down button aren't working! So what is the solution to this can i reinstall Android and find out if it works again because else my friend needs to boot the phone through fastboot and he has no understanding how this fastboot works so is there an another option or am is screwed? Could you please help me? Because i need to fix his phone for this weekend because he already sold his other phone......

kyrindia said:
Thanks for this
Code:
fastboot continue
didn't work but fastboot reboot worked. So i've managed to boot the device and when it was booted. I found out that the power button and the volume down button aren't working! So what is the solution to this can i reinstall Android and find out if it works again because else my friend needs to boot the phone through fastboot and he has no understanding how this fastboot works so is there an another option or am is screwed? Could you please help me? Because i need to fix his phone for this weekend because he already sold his other phone......
Click to expand...
Click to collapse
Did something happen to the phone?
Like dropped it in some liquid other than water?
Does the camera button still function?
For an android reinstall:
Boot the phone normally and perform a software reinstall using Sony PC Companion, connect it via USB to your pc.
With PCC you can fully reinstall the software on the phone.
http://support.sonymobile.com/gb/tools/pc-companion/

Brainpower said:
Did something happen to the phone?
Like dropped it in some liquid other than water?
Does the camera button still function?
For an android reinstall:
Boot the phone normally and perform a software reinstall using Sony PC Companion, connect it via USB to your pc.
With PCC you can fully reinstall the software on the phone.
http://support.sonymobile.com/gb/tools/pc-companion/
Click to expand...
Click to collapse
The phone screen was replaced recently. The camera button works fine. And i don't know if there was any other liquid then water in the phone or something like that. The last thing that i could try is to reinstall the software and hopefully that works.
Thanks anyway :good:

[HELP] Unable to flash firmware on Xperia SP C5303 using flashtool

So, the problem is that Xperia SP was working nice on Carbon 4.4.4 but then I flashed a kernel with bad WiFi module. That had a builtin TWRP (I previously had CWM and backed up everything using CWM)... then I did a really bad thing. I renamed boot.img from CWM backup to boot.emmc.win (TWRP compatible) which subsequently flashed CWM and old kernel. I forgot to restore my SYSTEM as some kernel parts are there (I knew it wouldn't work but I had plan to restore it via CWM)
Then I rebooted into recovery but it didn't reboot. Instead it showed me Sony logo and red LED. Then black screen and repeats same. I learnt how to hard reboot and it did no good. I have unlocked bootloader and I'm trying the flashtool but it won't recognize my phone (I have installed C:\Flashtool\drivers\*) on Windows 10 but it didn't do any good either.. Now when I reboot into fastboot mode it shows me blue LED but isn't detected by flashtool;
Same is with the Flash Mode. Green LED but no connection. On the notifs panel on PC It shows that device not recognized. On Device manager it shows: Unknown USB device (Device descriptor request failed)
I wanna install the drivers but they're already done. I reinstalled them twice just for surety's sake... Any suggestions to install drivers and flash the firmware? I don't know much about Sony as this is not mine, this is a free device that no one uses in my family. I own jfltexx
Edit: Whatever mode I put it in it bumps (reboots) out

Try letting the phone in flash mode and wait a bit till windows install driver automatically, or go to device manager and update unknown device driver, if this don't works, i don't know what more to do

lucasgta95 said:
Try letting the phone in flash mode and wait a bit till windows install driver automatically, or go to device manager and update unknown device driver, if this don't works, i don't know what more to do
Click to expand...
Click to collapse
I forgot to tell but if I I put it in flashmode it just shows LED for 3 seconds and turns off and starts to charge :/

This is normal on XSP, the led turn off but phone continues in flash mode

lucasgta95 said:
This is normal on XSP, the led turn off but phone continues in flash mode
Click to expand...
Click to collapse
But what about unrecognized device issue? How can I fix that?

I don't know what more to say :/
Here I just insert my device, then windows automatically recognize and install drivers, then I can use my flashtool normally

lucasgta95 said:
I don't know what more to say :/
Here I just insert my device, then windows automatically recognize and install drivers, then I can use my flashtool normally
Click to expand...
Click to collapse
Downgrading to Win7 due to non programmable GPU cores and drivers issue ...

It worked!! Flashed kernel elf file through fastboot and device booted up. Thanks mate

You're welcome